Generic V4 Universal Print Driver

System Administrator’s Guide

Version Date
1.2 Aug/10/2022
Revision History
Version Date Modified Contents Description
Released
1.0 Oct/5/2021 Initial version
edition
 Trademark Credits Released
1.1 Feb/1/2022  2.1. System requirements edition
 3.1 Summary
 Target Driver Version Released
 2.3. Supported Models edition
1.2 Aug/10/2022
 7.1. List of support functions of
each model

2 / 85
Trademark Credits
PCL is a trademark of Hewlett-Packard Company.

Microsoft, Windows, Windows Server 2012, Windows Server2016, Windows Server2019,

Windows Server2022, Windows 8.1, Windows 10, and Windows 11 are U.S. registered
trademarks of Microsoft Corporation.

Target Driver Version

The information in this document applies to the following versions of Generic V4 Universal
Print Drivers.
 Generic Universal V4 PCL Version 2.1

3 / 85
Index
1. Introduction ...................................................................................................................... 6
2. Software Description ........................................................................................................ 7
2.1. System requirements ................................................................................................ 7
2.2. V4 UPD Components ................................................................................................ 7
2.3. Supported Models ..................................................................................................... 8
3. Installing, Uninstalling .................................................................................................. 12
3.1. Summary................................................................................................................. 12
3.2. Install ...................................................................................................................... 12
3.2.1. Installing in “Network Search” by using the Included Installer ..................... 12
3.2.2. Installing in “Network Search” by using the Included Installer ..................... 16
3.2.3. Manual Installation ......................................................................................... 19
3.2.4. Installation in Point and Print environment ................................................... 27
3.3. Uninstallation ......................................................................................................... 38
3.3.1. If You Installed the Software Using the Included Installer............................. 38
3.3.2. Manual Uninstallation .................................................................................... 41
3.3.3. Uninstallation in Point and Print environment .............................................. 41
4. V4 Universal Print Driver’s UI ...................................................................................... 42
4.1. Printing Preferences UI .......................................................................................... 42
4.2. Device Settings UI .................................................................................................. 44
5. Using V4 Universal Print Driver.................................................................................... 47
5.1. Changing the model ................................................................................................ 47
5.2. Changing the display language .............................................................................. 50
5.3. Editing My Tab ....................................................................................................... 52
5.3.1. Adding My Tab................................................................................................. 53
5.3.2. Deleting My Tab .............................................................................................. 57
5.3.3. Moving My Tab ................................................................................................ 57
5.4. Adding Favorite Setting .......................................................................................... 58
5.5. Editing Favorite Setting ......................................................................................... 59
5.5.1. Deleting Favorite Setting ................................................................................ 61
5.5.2. Moving Favorite Setting .................................................................................. 62
5.5.3. Editing Favorite Print Setting......................................................................... 62
5.5.4. Edit Favorite Setting ....................................................................................... 64
5.6. Administrator Customization ................................................................................. 66
5.6.1. Print setting of customization target............................................................... 66

4 / 85
 5.6.2. Setting method ................................................................................................ 67
5.6.3. Export and import the setting of Administrator Customization ..................... 70
6. Frequently Asked Questions........................................................................................... 73
7. Appendix ......................................................................................................................... 74
7.1. List of support functions of each model .................................................................. 74

5 / 85
1. Introduction
Generic V4 Universal Print Driver supports the new printing system V4 architecture that is
available from Windows 8.

User Benefits
 UI suitable for touch operation
Generic V4 Universal Print Driver has a new UI that supports touch operation. It
solves the problem that it is hard to operate when using a conventional driver with a
tablet PC.

6 / 85
2. Software Description
2.1. System requirements
Generic V4 Universal Print Driver supports the following OS versions.
 Windows
 Windows 8.1
 Windows 10
 Windows 11
 Windows Server 2012 R2
 Windows Server 2016
 Windows Server 2019
 Windows Server 2022

2.2. V4 UPD Components

Generic V4 Universal Print Driver consists of types of component: UPD Core, Printer
Extension (PE). UPD Core is the core module of V4 UPD, Provides main functionality such
as printing. Printer Extension is an application that generates the Printing Preferences
screen when printing from desktop applications. It is provided in combination with UPD
Core.

Figure 2.2-1 V4 UPD Components

7 / 85
2.3. Supported Models
The table below lists the products supported by Generic V4 Universal Print Driver. Supporting
functions of Generic V4 Universal Print Driver are limited compared to normal drivers. See Error!
Reference source not found. Error! Reference source not found. for details about supporting
functions.
A3 Color 65C-9
55C-9
45C-9
36C-9
30C-9
25C-9
28C-8
22C-8
26C-7
22C-7
60C-6(e)
60C-7(e)
55C-6(e)
45C-6(e)
36C-6(e)
28C-6(e)
22C-6(e)
70C-10
65C-10
28C-2
22C-2
22C-3
36C-0i
30C-0i
25C-0i
65C-0i
55C-0i
45C-0i
28C-7i

8 / 85
 25C-7i
22C-7i
28C-6i
26C-6i
25C-6i
22C-6i
70C-0i

A3 BW 95BW-9
80BW-9
75BW-9
55BW-9
45BW-9
36BW-8
28BW-8
22BW-8
75BW-5(e)
65BW-5(e)
55BW-5e
45BW-5e
36BW-5e
28BW-5e
22BW-5e
36BW-9
30BW-9
65BW-9e
55BW-9e
45BW-9e
36BW-9e
30BW-9e
30BW-6i
26BW-6i
24BW-6i
22BW-6i
65BW-0i
55BW-0i

9 / 85
 45BW-0i
36BW-0i
30BW-0i
95BW-0i
85BW-0i

A4 Color C MF385-2
C MF335-2
C MF385-2FS
C MF335-1
C MF385-1
C MF385-1FS
C MF310P-1
C MF311-1
C405-0i
C335-0i
C400-0i
C330-0i
C332-0i

A4 BW BW MF475-1
BW MF405-1
BW MF475-3
BW MF405-3
LP4700-1
LP4000-1
LP3300-1
LP3301-1
BW MF402-1
BW MF332-1
LP470P-3
LP440P-3
LP360P-3
BW MF442-3
BW MF362-3
BW 502-0i

10 / 85
 BW 500-0i
BW 402-0i
BW 400-0i
BW475-0i
BW405-0i
BW470-0i

Baseline *1

Table 2-1 Products supported by Generic V4 Universal Print Driver

*1: This is a common model. If a driver does not support by Generic V4 Universal Printer
Driver or a third-party device is selected, it is also possible to send print data. However,
Cannot guarantee the printing results.

11 / 85
3. Installing, Uninstalling
3.1. Summary
By using the included installer/uninstaller (*1), you can easily install or uninstall the
Generic V4 Universal Print Driver.

*1: Execute "Setup.exe" in the case of x86 environment, "Setup64.exe" in the case of x64
environment. In the case of ARM64 environment, execute "SetupARM64_Win11.exe" for
Windows 11 and "SetupARM64_Win10.exe" for Windows 10.

3.2. Install
3.2.1. Installing in “Network Search” by using the Included Installer
1. Execute “Setup.exe”.
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.

Figure 3.2-1 Software End User License Agreement dialog box

12 / 85
3. Click “Install (Network Search)”.

Figure 3.2-2 Function Selection dialog box

4. Starting search devices on the network. Click “Cancel” if you want to stop searching.

Figure 3.2-3 Searching dialog box

13 / 85
5. Devices found in the search will be displayed in a list.

Figure 3.2-4 Device List dialog box

6. Settings such as Print Queue Name and Printer Driver Name will be displayed by
clicking “Detail”. Check the device you want to install and click “Next”.

Figure 3.2-5 Device List dialog box (Detail)

14 / 85
7. Installation Confirmation dialog box is displayed. Click “Install” to start installing.

Figure 3.2-6 Installation Confirmation dialog box

8. Progress of the installation is displayed.

Figure 3.2-7 Installation Process dialog box

15 / 85
9. The installation is complete.

Figure 3.2-8 Installation Complete dialog box

3.2.2. Installing in “Network Search” by using the Included Installer

1. Execute “Setup.exe”.
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.

Figure 3.2-9 Software End User License Agreement dialog box

16 / 85
3. Click “Install (Manual Setting)”.

Figure 3.2-10 Function Selection dialog box

4. Install (Manual Setting) dialog box is displayed. Click “Add to list” at the bottom left to
add a row to the list.

Figure 3.2-11 Install (Manual Setting) dialog box

17 / 85
5. Select the added row, and enter information such as Print Queue Name and Port on the
right side of the setting dialog box. Make sure that you have checked on the beginning
of the row you want to add the print queue and click “Next”.

Figure 3.2-12 Install (Manual Setting) dialog box (continue)

6. The following procedure is same as procedure 7 and later of 3.2.1 Installing in “Network
Search” by using the Included Installer.

18 / 85
3.2.3. Manual Installation
Install the driver using the Windows “Add Printer” wizard.
1. Open the “Devices and Printers” folder and click the “Add a printer” button.
2. The Add Printer wizard starts. Click “The printer that I want isn’t listed”.

Figure 3.2-13 Searching for devices

3. If a port already exists, select “Add a local printer of network printer with manual
settings” and then select an existing port. If not, select “Add a printer using a TCP/IP
address or hostname” and click “Next”.

Figure 3.2-14 Find a printer by other options

19 / 85
4. Enter IP in the “Host name or IP address” field and press “Next”.

Figure 3.2-15 Type a printer hostname of IP address

5. Click “Have Disk”.

Figure 3.2-16 Printer Driver Selection

20 / 85
6. Click “Browse”.

Figure 3.2-17 Install From Disk

7. Access the driver storage location, select “KOBxxKA_01”, and click “Open”.

Figure 3.2-18 Locate File

8. Click “OK”.

Figure 3.2-19 Install From Disk

21 / 85
9. Confirm that “Generic Universal V4 PCL” is selected and click “Next”.

Figure 3.2-20 Printer Driver Selection

10. You can rename the printer name. If not, just click “Next”.

Figure 3.2-21 Type a printer name

22 / 85
11. Installing printer.

Figure 3.2-22 Installing printer

12. The printer sharing setting screen will be displayed. If you want to share it, enter
sharing information, if not, select "Do not share this printer" and click “Next”.

Figure 3.2-23 Printer Sharing

23 / 85
13. The installation is complete. Click “Finish” to close the dialog box.

Figure 3.2-24 Installation complete

If you install Generic V4 Universal Print Driver using this method, the model will not be
selected automatically. So you also need to do the following procedure to select a model.
14. Right click the added printer icon from the “Devices and Printers” folder to open the
Printing Preferences.
15. Click the following message that displayed on the Printing Preferences.
“Please select model in [Devices and Printers]”.

Figure 3.2-25 Printing Preferences

24 / 85
16. The Confirmation dialog box will be displayed. If you want to save the printing settings,
click “Yes”. If not, click “No”.

Figure 3.2-26 Confirmation

17. Select a model in Model Selection dialog box and Click “OK”. If you want to acquire the
model automatically, Click “Auto”.

Figure 3.2-27 Model Selection

25 / 85
18. The Device Settings dialog box will be displayed. You can make settings for the device.
Otherwise, click “OK” to close it.

Figure 3.2-28 Device Settings

26 / 85
3.2.4. Installation in Point and Print environment
In V4UPD, when installing a shared printer in the Point and Print environment, it is
necessary to install the driver on the client PC after installing the shared printer.

First, install the shared printer.

1. Open the “Devices and Printers” and click the “Add a printer” button.
2. The Add Printer wizard starts. Click “The printer that I want isn’t listed”.

Figure 3.2-29 Searching for devices

3. In the “Find a printer by other options” window, select “Select a shared printer by
name" radio button and enter the shared printer path. Alternatively, you can also click
on [Browse…] button to search the shared printer from the network.

Figure 3.2-30-1 Find a printer by other options

27 / 85
4. Clicking on [Browse...] button displays a list of selectable computers. Select the network
printer or enter the printer name and click [select].

Figure 3.2-31-2 Select network Printer

5. If network authentication is required, [Enter network credentials] window is displayed.

On this window, enter the administrator account and password. Also make sure to
check the "Remember my credentials" checkbox.
If the checkbox is not checked, your credentials will not be stored and correct driver
installation and operation will not be possible.
After entering and checking, click [OK].

Figure 3.2-32-3 Enter network credentials

If you click [OK] and continue the installation without checking the "Remember my
credentials" checkbox, please remove and reinstall the print queue. Alternatively, use
the Credential Manager utility to register the credential information of the server.

28 / 85
6. Return to the “Find a printer by other options" window and click [Next].

Figure 3.2-33-4 Find a printer by other options

7. Connecting to the shared printer.

Figure 3.2-34 Connecting

29 / 85
8. If added successfully, the following screen is displayed. Click [Next].

Figure 3.2-35 Added successfully

9. Click “Finish” to close the dialog box.

Figure 3.2-36 Finish to install

Next we will install the driver on the client PC. There are two ways.

30 / 85
Method1: Installing by using the Included Installer
1. Execute "Setup.exe".
2. Check the Software End User License Agreement, and if there are no problems, click
“Agree”.

Figure 3.2-37 Software End User License Agreement dialog box

3. Click “Standard Update”

Figure 3.2-38 Function Selection dialog box

31 / 85
4. Confirm the print queue name and click “Update” to install the printer driver.

Figure 3.2-39 Update Target Confirmation dialog box (continue)

5. Staring update.

Figure 3.2-40 Updating Process dialog box

32 / 85
6. The update is complete. Click “OK” to close the dialog.

Figure 3.2-41 Update Complete dialog box

Method2: Manual Installation

1. Open the “Devices and Printers” folder and click the “Print Server Properties” button.
Click the “Add” button in “Drivers” tab of Print Server Properties dialog box.

Figure 3.2-42 Print Server Properties

33 / 85
2. Click “Next”.

Figure 3.2-43 Add Printer Driver Wizard

3. Select the Processor and click “Next”.

Figure 3.2-44 Processor Selection

34 / 85
4. Click “Have Disk”.

Figure 3.2-45 Printer Driver Selection

5. Click “Browse”.

Figure 3.2-46 Install From Disk

35 / 85
6. Access the driver storage location, select “KOBxxKA_01”, and click “Open”.

Figure 3.2-47 Locate File

7. Click “OK”.

Figure 3.2-48 Install From Disk

36 / 85
8. Confirm that “Generic Universal V4 PCL” is selected and click “Next”.

Figure 3.2-49 Printer Driver Selection

9. The installation is complete. Click “Finish” to close the dialog box.

Figure 3.2-50 Add Complete

37 / 85
10. Click “OK” to close the Print Server Properties dialog box.

Figure 3.2-51 Print Server Properties

3.3. Uninstallation
3.3.1. If You Installed the Software Using the Included Installer
If you have installed UPD using the included installer, then the uninstaller is also installed
on your operating system. Use that to uninstall the software.
1. Use the following method to start uninstaller.
Select “Control Panel” -> “Programs and Features” and double click “Generic Universal
V4 PCL”.

38 / 85
2. Print Queue and Printer Driver, which can be deleted will be displayed. Check on what
you want to delete and click “Next”.

Figure 3.3-1 Uninstall target selection dialog box

3. If you selected to delete Printer Driver, all Print Queues that use the Printer Driver will
be deleted.

4. The confirmation dialog of uninstallation will be displayed.

Figure 3.3-2 Uninstallation Details Confirmation dialog box

39 / 85
5. Progress of the Uninstallation will be displayed.

Figure 3.3-3 Uninstalling dialog box

6. The uninstallation is complete.

Figure 3.3-4 Uninstallation Complete dialog box

40 / 85
3.3.2. Manual Uninstallation
If you installed UPD manually, you must uninstall it manually by following the procedure
below.
1. Delete all print queues using the driver of “Generic Universal V4 PCL” from the
“Devices and Printers” folder.
2. Delete “Generic Universal V4 PCL” from the “Drivers” tab of the “Print Server
Properties” dialog box.

3.3.3. Uninstallation in Point and Print environment

When using Point and Print, the driver needs to be removed also from the client side. Follow
the steps below to remove the driver.
1. Open the “Devices and Printers” folder on client PC.
2. Delete the print queue of the shared V4 UPD.
3. Delete “Generic Universal V4 PCL” from the “Drivers” tab of the “Print Server
Properties” dialog box.

41 / 85
4. V4 Universal Print Driver’s UI
4.1. Printing Preferences UI
Generic V4 Universal Print Driver has a new UI that supports touch operation.

Printing Preferences
The Printing Preferencesconsists of the following areas.

Figure 4.1-1 Printing Preferences – My Tab

42 / 85
The descriptions of each area are described below.

Area Description
Paper View / Text
You can switch to two screens: “Paper View” and “Text View”.
View
Favorite Setting It is the same function as the conventional favorite setting.
My Tab / All Tab ・You can switch to two screens: “My Tab” and “All Tab”.
・”My Tab” is the same function as the conventional My Tab.
・On the "All Tab" screen, you can set all print settings.
You can adjust the height of “Paper View / Text View” and
Splitter
“Favorite Setting”.
Change all settings except the following items to default values.
Restore Default ・Settings of child dialog.
Setting ・Items and layout of Favorite Settings.
・Items and layout of My Tab.
・A warning message will be displayed if the model is not selected
Model Selection or if the selected model is incorrect.
Message ・The Model Selection Dialog Box will be displayed if click the
message.

Table 4-1 Descriptions of the Printing Preferences

The following screen will be displayed by clicking “All Tab”.

In “All Tab”, it is grouped into "Basic", "Layout", "Finish", "Cover Mode ",
"Stamp/Composition", and “Quality" and folded.
By clicking each group name, the setting value will be displayed.

Figure 4.1-2 Printing Preferences – All Tab

43 / 85
4.2. Device Settings UI
You can select model and make settings for device in Generic V4 Universal Print Driver.
Open the Device Settings dialog box from the Printing Preferences by the following
procedures.
1. Open the Printing Preferences.
2. Click “All Tab”.

Figure 4.2-1 Printing Preferences – My Tab

3. Click “Device Settings” button in the “Other” group.

Figure 4.2-2 Printing Preferences – All Tab

44 / 85
4. Confirmation dialog box will be displayed. Select “Yes” to save the current print settings,
or “No” if you do not want to save them.

Figure 4.2-3 Confirmation

5. Device Settings dialog box is displayed.

Figure 4.2-4 Device Settings

45 / 85
The descriptions of the settings in Device Settings are described below.

Parameter Description
Model Display the model name selected.
Select Model Pop up the Model Selection dialog box.
Device Option Displayed the information of device options.
Option Display the options that can be set.
Value Display the set value of each option.
Obtain Device Information Obtain information from the device and apply it to “Device
Option” and “Encryption Passphrase”.
Encryption Passphrase Specify whether to set a user-defined encryption
Passphrase.
Obtain Settings Pop up the Obtain Settings dialog box.
Administrator Customize Pop up the Admin Configuration dialog box.

Table 4-2 Descriptions of the Device Settings dialog box

46 / 85
5. Using V4 Universal Print Driver
5.1. Changing the model
In Generic V4 Universal Print Driver, you can change the model to be used from the driver
UI.
1. Open the Printing Preferences.

Figure 5.1-1 Printing Preferences – My Tab

2. Click “Device Settings” button in the “Other” group of the “All Tab”.

Figure 5.1-2 Printing Preferences – All Tab

47 / 85
3. Click the “Select Model” button in Device Settings dialog box.

Figure 5.1-3 Device Settings dialog box

4. Select a model in Model Selection dialog box and Click “OK”. If you want to acquire the
model automatically, Click “Auto”.

Figure 5.1-4 Model Selection dialog box

48 / 85
5. Click “OK” to close the Device Settings dialog box. The settings of the selected model
will be reflected when you open the Printing Preferences next time.

Figure 5.1-5 Device Settings dialog box

49 / 85
5.2. Changing the display language
In Generic V4 Universal Print Driver, you can change the display language from Printing
Preferences.

Change the display language from Printing Preferences

1. Open the Printing Preferences.

Figure 5.2-1 Printing Preferences – My Tab

2. Click “Language Setting” button in the “Other” group of the “All Tab”.

Figure 5.2-2 Printing Preferences – All Tab

50 / 85
3. Set the display language on the Language Setting dialog box and click “OK” to close it.

Figure 5.2-3 Language Setting dialog box

4. Click “OK” to close the Printing Preferences. The display language will be changed
when you open the Printing Preferences next time.

Figure 5.2-4 Printing Preferences – All Tab

51 / 85
5.3. Editing My Tab
In Generic V4 Universal Print Driver, you can edit My Tab screen and customize it.
1. Open the Printing Preferences and click the gear icon in the upper right corner of the
screen.

Figure 5.3-1 Printing Preferences – My Tab

2. Entering the My Tab edit mode, you can add, delete, and change the items for your
favorite.

Figure 5.3-2 Edit My Tab

52 / 85
3. Click the gear icon again to save the edited content and end the edit mode of My Tab.

Figure 5.3-3 Edit My Tab

5.3.1. Adding My Tab

1. Entering the My Tab edit mode, click on the "+" icon in the upper right or click on "All
Tab" tab.

Figure 5.3-4 Printing Preferences – My Tab

53 / 85
2. Move to the "All Tab" tab. The print settings, which have been added on My Tab are
shown to be gray.

Figure 5.3-5 Edit My Tab

The following two methods can add print settings to My Tab.

Method 1 Use the Add button to add

① Click the [☆] icon on the top right of the selected item in All Tab.

Figure 5.3-6 Edit My Tab

54 / 85
② The print settings that have been clicked will be added to the My Tab and then it will be
gray.

Figure 5.3-7 Edit My Tab

② Click "My Tab" tab to confirm that the item have been added on the My Tab.

Figure 5.3-8 Edit My Tab

55 / 85
Method 2 Drag and drop to add
① Drag the print setting you want to add.

Figure 5.3-9 Edit My Tab

② Entering My Tab mode. Move the dragged item to the place as your like.

Figure 5.3-10 Edit My Tab

56 / 85
5.3.2. Deleting My Tab
1. Entering edit My Tab mode. Click the [×] icon of the selected item. Delete the selected
item from My Tab.

Figure 5.3-11 Edit My Tab

5.3.3. Moving My Tab

1. Entering edit My Tab mode. Drag the selected item in My Tab. Move the place of the
item left/right/up/down.

Figure 5.3-12 Edit My Tab

57 / 85
5.4. Adding Favorite Setting
According to the following steps, you can add the print settings into the Favorite.
1. Open the Printing Preferences and make print settings.
2. Click the “+” icon in the Favorite Setting area.

Figure 5.4-1 Printing Preferences –Favorite

3. The current printing settings have been added into the Favorite. The name and
comment are default and can be modified by clicking 2 times.

Figure 5.4-2 Add Favorite Setting

58 / 85
4. Click "OK" button on the print setting. After the screen is closed, the added Favorite
will be saved.

Figure 5.4-3 Printing Preferences –Favorite

5.5. Editing Favorite Setting

1. Open the Printing Preferences and click the gear icon in the Favorite Setting area.

Figure 5.5-1 Printing Preferences– My Tab

59 / 85
2. Entering the Favorite Setting edit mode, you can delete, edit print setting and change
configures.

Figure 5.5-2 Favorite Setting

3. Click the gear icon again to save the edited content and end the edit mode of the
Favorite Setting.

Figure 5.5-3 Favorite Setting

60 / 85
4. Click "OK" button on the print setting. After the screen is closed, the added Favorite
will be saved.

Figure 5.5-4 Favorite Setting

5.5.1. Deleting Favorite Setting

1. Entering edit Favorite Setting mode. Click the [×] icon of the selected Favorite. Delete
the selected Favorite from Favorite Setting.

Figure 5.5-5 Favorite Setting

61 / 85
5.5.2. Moving Favorite Setting
1. Entering edit Favorite Setting mode. Drag the Favorite to move, moving the Favorite
display position to the top / bottom.

Figure 5.5-6 Favorite Setting

5.5.3. Editing Favorite Print Setting

1. Entering the Favorite Setting edit mode, after selecting one of the Favorite, the printed
setting in the Favorite on the right side is reflected.

Figure 5.5-7 Printing Preferences –Favorite

62 / 85
2. Select the favorite you want to edit, and if you have a print setting editing, the favorite
icon shows the frame in the edit.
※The preset favorite cannot be edited.

Figure 5.5-8 Favorite Setting

3. The edit information will be update by ending the Edit mode.

63 / 85
5.5.4. Edit Favorite Setting
1. Entering the Favorite Setting edit mode. Click the pencil icon in the Favorite Setting
screen.

Figure 5.5-9 Favorite Setting

2. Edit Favorite Setting dialog box is displayed.

Figure 5.5-10 Edit Favorite Setting

64 / 85
The descriptions of the settings in Edit Favorite Setting dialog box are described below.

Parameter Description
Favorite List Display the saved favorite settings in list.
Import Read the favorite settings information in a saved file and
add it to the Favorite Setting List.
Export Save the favorite setting selected in the Favorite List as a
file.
Restore Preset Favorites Restore all hidden preset favorites and display the favorite
settings in list.
Name Enter the name of the selected item in the Favorite List
Enter the comment of the selected item in the Favorite
Comment
List
Specify the sharing setting of the selected item in the
Sharing
Favorite List
Restore Items Set whether the information saved by the following
[Favorite] is reflected on the UI when Restore Items for
[Favorite]
Original Document Size, Set the items of [Document Size] [Orientation] in [Basic]
Orientation
Copies Set Copies of [Basic]
Watermark [Text List Set [Watermark] list of Stamp/Composition.
Information]
Restore Common Settings Set already sharing watermark.
※The state which display when watermark List
Information is on
Select All Select the Restore items of Select All

Figure 5.5-11 Descriptions of the Edit Favorite Setting dialog box

65 / 85
5.6. Administrator Customization
Generic V4 Universal Print Driver supports the function that customize the print settings
by administrator. Default value of print setting can be changed or fixed by using this
function.

5.6.1. Print setting of customization target

Item name Setting value
Select Color Auto Color
Gray Scale
Black + Red
Black + Green
Black + Blue
Black + Cyan
Black + Magenta
Black + Yellow
Black + Chinese Red
Print Type 1-Sided
2-Sided
Booklet
Output Method Print
Store Job
Print and Hold
Secure Print
Save in User Box
Save in User Box/Print
Proof Print
ID & Print
Secure Print Secure Print ID Arbitrary value in the input range
Password Arbitrary value in the input range
Save in User Box File Name Arbitrary value in the input range
User Box Number Arbitrary value in the input range
User User Public User
Authentication Recipient User
User Name Use Windows Login ID
Edit User Name

66 / 85
 Password Arbitrary value in the input range
Server Setting Server1~ Server20
MFP Enhanced Server
Authentication External Server
Device
Account Track Department Name Arbitrary value in the input range
Password Arbitrary value in the input range

Import...

Export...

5.6.2. Setting method

Open the Admin Configuration dialog from the Printing Preferences by the following
procedures.
1. Open the Printing Preferences.
2. Click “All Tab” .

図 5.6-1 Printing Preferences – All Tab

67 / 85
3. Click “Device Settings…” button in the “Other” group.
4. Confirmation dialog box will be displayed. Select “Yes” or “No”.

図 5.6-2 Confirmation

5. Device Settings dialog box is displayed. Click “Administrator Customize...”.

図 5.6-3 Device Settings dialog box

68 / 85
6. Admin Configuration dialog will be displayed. Select the method of customize print
settings in the left column. Select “Select default setting” if you want to specify the
default value, or select “Lock setting” if you want to fix the value.

図 5.6-2 Admin Configuration dialog box 1

7. Next, select the value of the feature in the right column.

図 5.6-5 Admin Configuration dialog box 2

69 / 85
8. In the above example, Gray Scale has been selected to the default value of Select Color,
and Print Type has been locked to 1-Sided. Printing Preferences are as follows.

図 5.6-6 Printing Preferences

5.6.3. Export and import the setting of Administrator Customization

It is possible to export the settings of Administrator Customization to file (.KAC file) and
import to another Print Queue.
Method of export
1. Click “Export...”.

図 5.6-8 Export Selection

70 / 85
2. Specify location and file name, and then click “Save”.

図 5.6-9 Export Destination Selection

Method of import
1. Click “Import...”.

図 5.6-10 Import selection

71 / 85
3. Select the .KAC to import and then click “Open”.

図 5.6-11 Import Destination Selection

72 / 85
6. Frequently Asked Questions
Question Answer
Is the Citrix environment No. Generic V4 Universal Print Driver do not support
Supported? Citrix environment
Can I Use My Tab function? Yes. My Tab function is available in Generic V4 Universal
Print Driver.
Can I update from UPD No. Generic V4 Universal Print Driver is a driver with a
Ver.3.x new architecture, which is different from UPD Ver.3.x. So
Generic V4 Universal Print Driver cannot be updated from
UPD Ver.3.x.
Is the Windows 10 S Mode Yes, Generic V4 Universal Print Driver Ver.2.0 supports
Supported? the Windows 10 S Mode. However, you cannot install
(steps 3.2.1, 3.2.2) and uninstall (steps 3.3.1, 3.3.2) with
the installer. Please install and uninstall the driver
manually.

Table 6-1 FAQ

73 / 85
7. Appendix
7.1. List of support functions of each model
A3 Color

55C-6(e)/
28C-6i/
Function (1/12) Baseline 65C-9/ 36C-9/ 45C-6(e)/ 28C-2/ 36C-0i/ 65C-0i/ 28C-7i/
28C-8/ 26C-7/ 60C-6(e)/ 70C-10/ 26C-6i/
55C-9/ 30C-9/ 36C-6(e)/ 22C-2/ 30C-0i/ 55C-0i/ 25C-7i/ 70C-0i
22C-8 22C-7 60C-7(e) 65C-10 25C-6i/
45C-9 25C-9 28C-6(e)/ 22C-3 25C-0i 45C-0i 22C-7i
22C-6i
22C-6(e)

Basic
Original Orientation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Original Size ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Size ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Zoom ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Tray ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Copies ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Collate ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Offset ○ ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○
Output Method ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Store Job × × × × × × × × × × × × × ×
Print and Hold × × × × × × × × × × × × × ×
Secure Print × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Save in User Box × ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ ○
Save in User Box/Print × ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ ○
Proof Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ID& Print × ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ ○
*1: WSD Protocol、×
Table 7-1 List of support functions of each model (1/12)

74 / 85
 A3 Color

55C-6(e)/
28C-6i/
Function (2/12) Baseline 65C-9/ 36C-9/ 45C-6(e)/ 28C-2/ 70C-10 36C-0i/ 65C-0i/ 28C-7i/
28C-8/ 26C-7/ 60C-6(e)/ 26C-6i/
55C-9/ 30C-9/ 36C-6(e)/ 22C-2/ / 30C-0i/ 55C-0i/ 25C-7i/ 70C-0i
22C-8 22C-7 60C-7(e) 25C-6i/
45C-9 25C-9 28C-6(e)/ 22C-3 65C-10 25C-0i 45C-0i 22C-7i
22C-6i
22C-6(e)

Authentication/Account Track × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Authentication × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Enhanced Server × ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
External Server × ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Device × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Account Track × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Layout
Combination (N in 1) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Poster ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rotate 180 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Skip Blank Pages ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Print Type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Booklet (Device) ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Booklet (Driver) × × × × × × × ○ × × × × × ×
Binding Position ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Binding Margin ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Finish
Staple ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ × ○
Center Staple and Fold ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ × ○
Punch ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ × ○
Fold ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ × ○
Output Tray ○ ○ ○ ○ × ○ ○ × ○ ○ ○ ○ × ○
Paper Arrangement ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Prioritize Arranging Papers ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Prioritize Productivity ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Table 7-2 List of support functions of each model (2/12)

75 / 85
 A3 Color

55C-6(e)/
28C-6i/
Function (3/12) Baseline 65C-9/ 36C-9/ 45C-6(e)/ 28C-2/ 36C-0i/ 65C-0i/ 28C-7i/
28C-8/ 26C-7/ 60C-6(e)/ 70C-10/ 26C-6i/
55C-9/ 30C-9/ 36C-6(e)/ 22C-2/ 30C-0i/ 55C-0i/ 25C-7i/ 70C-0i
22C-8 22C-7 60C-7(e) 65C-10 25C-6i/
45C-9 25C-9 28C-6(e)/ 22C-3 25C-0i 45C-0i 22C-7i
22C-6i
22C-6(e)

Cover Mode
Front Cover ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Back Cover ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Front Cover from Post Inserter ○ ○ × × × ○ ○ × ○ × ○ × × ○
Back Cover from Post Inserter ○ ○ × × × ○ ○ × ○ × ○ × × ○
Transparency Interleave ○ ○ ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○
Stamp/Composition
Watermark ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Quality
Select Color ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Auto Color ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Gray Scale ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2 Color ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Resolution ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Toner Save ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other
Quiet Mode × × × × × × × × × × × × × ×
Improve Print Output × × × × × × × × × × × × × ×
Device Settings ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Language Setting ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
About ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-1 List of support functions of each model (3/12)

76 / 85
 A3 BW

55BW-5e/ 65BW-9e/ 65BW-0i/

30BW-6i/
Function (4/12) 95BW-9/ 36BW-8/ 45BW-5e/ 55BW-9e/ 55BW-0i/
55BW-9/ 75BW-5(e)/ 36BW-9/ 26BW-6i/ 95BW-0i/
80BW-9/ 28BW-8/ 36BW-5e/ 45BW-9e/ 45BW-0i/
45BW-9 65BW-5 (e) 30BW-9 24BW-6i/ 85BW-0i
75BW-9 22BW-8 28BW-5e/ 36BW-9e/ 36BW-0i/
22BW-6i
22BW-5e 30BW-9e 30BW-0i

Basic
Original Orientation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Original Size ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Size ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Zoom ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Tray ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Copies ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Collate ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Offset ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Output Method ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Store Job × × × × × × × × × ×
Print and Hold × × × × × × × × × ×
Secure Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Save in User Box ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Save in User Box/Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Proof Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ID& Print ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
*1: WSD Protocol、×
Table 7-4 List of support functions of each model (4/12)

77 / 85
 A3 BW

55BW-5e/ 65BW-9e/ 65BW-0i/

30BW-6i/
Function (5/12) 95BW-9/ 36BW-8/ 45BW-5e/ 55BW-9e/ 55BW-0i/
55BW-9/ 75BW-5(e)/ 36BW-9/ 26BW-6i/ 95BW-0i/
80BW-9/ 28BW-8/ 36BW-5e/ 45BW-9e/ 45BW-0i/
45BW-9 65BW-5 (e) 30BW-9 24BW-6i/ 85BW-0i
75BW-9 22BW-8 28BW-5e/ 36BW-9e/ 36BW-0i/
22BW-6i
22BW-5e 30BW-9e 30BW-0i

Authentication/Account Track ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User Authentication ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Enhanced Server ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
External Server ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Device ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Account Track ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Layout
Combination (N in 1) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Poster ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rotate 180 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Skip Blank Pages ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Print Type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Booklet (Device) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Booklet (Driver) × × × × × × × × × ×
Binding Position ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Binding Margin ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Finish
Staple ○ ○ ○ ○ ○ ○ ○ × ○ ○
Center Staple and Fold ○ ○ ○ ○ ○ ○ ○ × ○ ○
Punch ○ ○ ○ ○ ○ ○ ○ × ○ ○
Fold ○ ○ ○ ○ ○ ○ ○ × ○ ○
Output Tray ○ ○ ○ ○ ○ ○ ○ × ○ ○
Paper Arrangement ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Prioritize Arranging Papers ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Prioritize Productivity ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-5 List of support functions of each model (5/12)

78 / 85
 A3 BW

55BW-5e/ 65BW-9e/ 65BW-0i/

30BW-6i/
Function (6/12) 95BW-9/ 36BW-8/ 45BW-5e/ 55BW-9e/ 55BW-0i/
55BW-9/ 75BW-5(e)/ 36BW-9/ 26BW-6i/ 95BW-0i/
80BW-9/ 28BW-8/ 36BW-5e/ 45BW-9e/ 45BW-0i/
45BW-9 65BW-5 (e) 30BW-9 24BW-6i/ 85BW-0i
75BW-9 22BW-8 28BW-5e/ 36BW-9e/ 36BW-0i/
22BW-6i
22BW-5e 30BW-9e 30BW-0i

Cover Mode
Front Cover ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Back Cover ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Front Cover from Post Inserter ○ ○ × ○ ○ × ○ × ○ ○
Back Cover from Post Inserter ○ ○ × ○ ○ × ○ × ○ ○
Transparency Interleave ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Stamp/Composition
Watermark ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Quality
Select Color × × × × × × × × × ×
Auto Color × × × × × × × × × ×
Gray Scale × × × × × × × × × ×
2 Color × × × × × × × × × ×
Resolution ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Toner Save ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other
Quiet Mode × × × × × × × × × ×
Improve Print Output × × × × × × × × × ×
Device Settings ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Language Setting ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
About ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-6 List of support functions of each model (6/12)

79 / 85
 A4 Color

C MF385-2/ C MF385-1/ C400-0i/

Function (7/12) C405-0i/
C MF335-2/ C MF335-1/ C MF310P-1 C MF311-1 C330-0i/
C335-0i
C MF385-2FS C MF385-1FS C332-0i

Basic
Original Orientation ○ ○ ○ ○ ○ ○
Original Size ○ ○ ○ ○ ○ ○
Paper Size ○ ○ ○ ○ ○ ○
Zoom ○ ○ ○ ○ ○ ○
Paper Tray ○ ○ ○ ○ ○ ○
Paper Type ○ ○ ○ ○ ○ ○
Copies ○ ○ ○ ○ ○ ○
Collate ○ ○ ○ ○ ○ ○
Offset ○ ○ × × × ×
Output Method ○ ○ ○ ○ ○ ○
Print ○ ○ ○ ○ ○ ○
Store Job × ○ ○ ○ × ○
Print and Hold × ○ ○ ○ × ○
Secure Print ○ ○ ○ ○ ○ ×
Save in User Box ○ × × × ○ ×
Save in User Box/Print ○ × × × ○ ×
Proof Print ○ ○ ○ ○ ○ ○
ID& Print ○ ○ ○ ○ ○ ×
*2: Model =3300P,3301P、× *3: Model =3602P、×
Table 7-7 List of support functions of each model (7/12)

80 / 85
 A4 Color

C3851/ C3350/ C4000i/

Function (8/12) C4050i/
C3351/ C3850/ C3100P C3110 C3300i/
C3350i
C3851FS C3850FS C3320i

Authentication/Account Track ○ ○ ○ ○ ○ ○
User Authentication ○ ○ ○ ○ ○ ○
Enhanced Server ○ ○ ○ ○ ○ ○
External Server ○ ○ × × ○ ○
Device ○ ○ ○ ○ ○ ○
Account Track ○ ○ ○ ○ ○ ○
Layout
Combination (N in 1) ○ ○ ○ ○ ○ ○
Poster ○ ○ ○ ○ ○ ○
Rotate 180 ○ ○ ○ ○ ○ ○
Skip Blank Pages ○ ○ ○ ○ ○ ○
Print Type ○ ○ ○ ○ ○ ○
1-Sided ○ ○ ○ ○ ○ ○
2-Sided ○ ○ ○ ○ ○ ○
Booklet (Device) ○ × × × ○ ○
Booklet (Driver) × ○ ○ ○ × ×
Binding Position ○ ○ ○ ○ ○ ○
Binding Margin ○ ○ ○ ○ ○ ○
Finish
Staple ○ ○ × × × ×
Center Staple and Fold × × × × × ×
Punch × × × × × ×
Fold × × × × × ×
Output Tray × × × × × ×
Paper Arrangement ○ × × × ○ ○
Prioritize Arranging Papers ○ × × × ○ ○
Prioritize Productivity ○ × × × ○ ○
Table 7-8 List of support functions of each model (8/12)

81 / 85
 A4 Color

C3851/ C3350/ C4000i/

Function (9/12) C4050i/
C3351/ C3850/ C3100P C3110 C3300i/
C3350i
C3851FS C3850FS C3320i

Cover Mode
Front Cover ○ × × × ○ ○
Back Cover ○ × × × ○ ○
Front Cover from Post Inserter × × × × × ×
Back Cover from Post Inserter × × × × × ×
Transparency Interleave × × × × × ×
Stamp/Composition
Watermark ○ ○ ○ ○ ○ ○
Quality
Select Color ○ ○ ○ ○ ○ ○
Auto Color ○ ○ ○ ○ ○ ○
Gray Scale ○ ○ ○ ○ ○ ○
2 Color ○ × × × ○ ○
Resolution ○ ○ ○ ○ ○ ○
Toner Save ○ ○ ○ ○ ○ ○
Other
Quiet Mode × × × × × ×
Improve Print Output × × × × × ×
Device Settings ○ ○ ○ ○ ○ ○
Language Setting ○ ○ ○ ○ ○ ○
About ○ ○ ○ ○ ○ ○
Table 7-9 List of support functions of each model (9/12)

82 / 85
 A4 BW

LP4700-1/ BW 502-0i/
LP470P-3/
Function (10/12) BW MF475-1/ LP4000-1/ BW MF402-1/ BW MF475-3/ BW MF442-3/ BW 500-0i/ BW475-0i/
LP440P-3/ BW470-0i
BW MF405-1 LP3300-1/ BW MF332-1 BW MF405-3 BW MF362-3 BW 402-0i/ BW405-0i
LP360P-3
LP3301-1 BW 400-0i

Basic
Original Orientation ○ ○ ○ ○ ○ ○ ○ ○ ○
Original Size ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Size ○ ○ ○ ○ ○ ○ ○ ○ ○
Zoom ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Tray ○ ○ ○ ○ ○ ○ ○ ○ ○
Paper Type ○ ○ ○ ○ ○ ○ ○ ○ ○
Copies ○ ○ ○ ○ ○ ○ ○ ○ ○
Collate ○ ○ ○ ○ ○ ○ ○ ○ ○
Offset × × × × × × × × ×
Output Method ○ ○ ○ ○ ○ ○ ○ ○ ○
Print ○ ○ ○ ○ ○ ○ ○ ○ ○
Store Job ○ ○ *2 ○ × ○ *3 ○ × × ×
Print and Hold ○ ○ *2 ○ × ○ *3 ○ × × ×
Secure Print ○ ○ *2 ○ ○ ○ *3 ○ ○ ○ ×
Save in User Box × × × ○ × × × ○ ×
Save in User Box/Print × × × ○ × × × ○ ×
Proof Print ○ ○ *2 ○ ○ ○ *3 ○ × ○ ○
ID& Print ○ × × ○ × × × ○ ×
*2: Model =3300P,3301P、× *3: Model =3602P、×
Table 7-10 List of support functions of each model (10/12)

83 / 85
 A4 BW

4700P/ 5020i/
4702P/
Function (11/12) 4750/ 4000P/ 4020/ 4752/ 4422/ 5000i/ 4750i/
4402P/ 4700i
4050 3300P/ 3320 4052 3622 4020i/ 4050i
3602P
3301P 4000i

Authentication/Account Track ○ × × ○ × × × ○ ○
User Authentication ○ × × ○ × × × ○ ○
Enhanced Server ○ × × ○ × × × ○ ○
External Server ○ × × ○ × × × ○ ○
Device ○ × × ○ × × × ○ ○
Account Track ○ × × ○ × × × ○ ○
Layout
Combination (N in 1) ○ ○ ○ ○ ○ ○ ○ ○ ○
Poster ○ ○ ○ ○ ○ ○ ○ ○ ○
Rotate 180 ○ ○ ○ ○ ○ ○ ○ ○ ○
Skip Blank Pages ○ ○ ○ ○ ○ ○ ○ ○ ○
Print Type ○ ○ ○ ○ ○ ○ ○ ○ ○
1-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○
2-Sided ○ ○ ○ ○ ○ ○ ○ ○ ○
Booklet (Device) × × × ○ × × × ○ ○
Booklet (Driver) ○ ○ ○ × ○ ○ ○ × ×
Binding Position ○ ○ ○ ○ ○ ○ ○ ○ ○
Binding Margin ○ ○ ○ ○ ○ ○ ○ ○ ○
Finish
Staple ○ × × ○ × × × × ×
Center Staple and Fold × × × × × × × × ×
Punch × × × × × × × × ×
Fold × × × × × × × × ×
Output Tray × × × × × × × × ×
Paper Arrangement × × × ○ × × × ○ ○
Prioritize Arranging Papers × × × ○ × × × ○ ○
Prioritize Productivity × × × ○ × × × ○ ○
Table 7-11 List of support functions of each model (11/12)

84 / 85
 A4 BW

4700P/ 5020i/
4702P/
Function (12/12) 4750/ 4000P/ 4020/ 4752/ 4422/ 5000i/ 4750i/
4402P/ 4700i
4050 3300P/ 3320 4052 3622 4020i/ 4050i
3602P
3301P 4000i

Cover Mode
Front Cover × × × ○ × × × ○ ○
Back Cover × × × ○ × × × ○ ○
Front Cover from Post Inserter × × × × × × × × ×
Back Cover from Post Inserter × × × × × × × × ×
Transparency Interleave × × × × × × × × ×
Stamp/Composition
Watermark ○ ○ ○ ○ ○ ○ ○ ○ ○
Quality
Select Color × × × × × × × × ×
Auto Color × × × × × × × × ×
Gray Scale × × × × × × × × ×
2 Color × × × × × × × × ×
Resolution ○ ○ ○ ○ ○ ○ ○ ○ ○
Toner Save ○ ○ ○ ○ ○ ○ ○ ○ ○
Other
Quiet Mode × × × × × × ○ × ×
Improve Print Output × × × × × × ○ × ×
Device Settings ○ ○ ○ ○ ○ ○ ○ ○ ○
Language Setting ○ ○ ○ ○ ○ ○ ○ ○ ○
About ○ ○ ○ ○ ○ ○ ○ ○ ○
Table 7-12 List of support functions of each model (12/12)

85 / 85