No.

MIICT0057EA

DICOM CONFORMANCE STATEMENT

FOR
TOSHIBA WHOLE-BODY X-RAY CT SCANNER
AquilionTM , AlexionTM
Aquilion ONETM Aquilion PRIMETM
V5.00
(TSX-101A, TSX-301A,TSX-301B,TSX-301C,
TSX-302A,TSX-032A,TSX-303A)

© TOSHIBA MEDICAL SYSTEMS CORPORATION 2012

ALL RIGHTS RESERVED
 No. MIICT0057EA

Trademarks
Aquilion and Aquilion ONE are trademark of Toshiba Medical Systems Corporation.
This document may include trademarks or registered trademarks of other companies.

IMPORTANT!
(1) No part of this document may be copied or reprinted, in whole or in part,
without written permission.
(2) The contents of this document are subject to change without prior notice
and without our legal obligation.

*
C-1
 No. MIICT0057EA

1. CONFORMANCE STATEMENT OVERVIEW

TM TM TM
Table 1-1 provides an overview of the network services supported by Alexion , Aquilion , AquilionPRIME
TM
and Aquilion ONE .
Table 1-1
NETWORK SERVICES
SOP Classes User of Provider of
Service (SCU) Service (SCP)
Transfer
1
CT Image Storage Yes Yes* (COT-30D)
1
Secondary Capture Image Storage Yes Yes* (COT-30D)
1
Standalone Curve Storage Yes Yes* (COT-30D)
2 2
Enhanced CT Image Storage Yes* (COT-45A) Yes* (COT-45A)
1
Grayscale Softcopy Presentation State Yes Yes* (COT-30D)
Storage
1
Enhanced SR Storage Yes Yes* (COT-30D)
1
X-Ray Radiation Dose SR Storage Yes Yes* (COT-30D)
Segmentation Storage Yes Yes
Storage Commitment
1
Storage Commitment Push Model Yes* (COT-41D) No
Query/Retrieve
1
Patient Root Q/R Information Model – Find No Yes* (COT-34D)
1
Patient Root Q/R Information Model – Move No Yes* (COT-34D)
1 1
Study Root Q/R Information Model – Find Yes* (COT-35D) Yes* (COT-34D)
1 1
Study Root Q/R Information Model – Move Yes* (COT-35D) Yes* (COT-34D)
1
Patient/Study Only Information Model – Find No Yes* (COT-34D)
1
Patient/Study Only Information Model – Move No Yes* (COT-34D)
Workflow Management
1
Modality Worklist Information Model – Find Yes* (COT-32D) No
1
Modality Performed Procedure Step Yes* (COT-33D) No
1
Modality Performed Procedure Step Retrieve Yes* (COT-33D) No
Print Management
Basic Grayscale Print Management Yes No
Basic Color Print Management Yes No
1
* :Option
2 TM TM TM TM
* :Option for Alexion , Aquilion , AquilionPRIME , Standard for Aquilion ONE
(COT-XXX):Option Model Name

i
 No. MIICT0057EA

TM TM
Table 1-2 provides an overview of the Media Storage Application Profiles supported by Alexion , Aquilion ,
TM TM
AquilionPRIME and Aquilion ONE .
Table 1-2
MEDIA SERVICES
Media Storage Application Profile Write Files Read Files
(FSC or FSU) (FSR)

Compact Disk – Recordable

CT and MR Image CD-R Yes No*

General Purpose CD-R Yes Yes

Private TOSIHBA CT CD-R Yes Yes

DVD - Recordable

General Purpose DVD-R Yes Yes

Private TOSIHBA CT DVD-R Yes Yes

DVD - Random Access

CT and MR Image DVD-RAM Yes No*

General Purpose DVD-RAM Yes Yes

Private TOSHIBA CT DVD-RAM Yes Yes

*: The system supports some parts of the CT and MR Image CD-R and the CT and MR Image DVD-RAM
Application Profile as an FSR. Supported SOP Classes and Transfer Syntaxes are listed below.

Table 1-3
SUPPORTED IODS, SOP CLASSES AND TRANSFER SYNTAXES
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Directory Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])

ii

*
 No. MIICT0057EA

2. TABLE OF CONTENTS

1. CONFORMANCE STATEMENT OVERVIEW ............................................................. i

2. TABLE OF CONTENTS ............................................................................................. a

3. INTRODUCTION ........................................................................................................ 1
3.1 REVISION HISTORY ........................................................................................................................... 1
3.2 AUDIENCE ........................................................................................................................................... 1
3.3 REMARKS ........................................................................................................................................... 1
3.4 DEFINITIONS, TERMS AND ABBREVIATIONS ................................................................................ 2
3.5 REFERENCES ..................................................................................................................................... 2

4. NETWORKING ........................................................................................................... 3
4.1 IMPLEMENTATION MODEL ............................................................................................................... 3
4.1.1 Application Data Flow ................................................................................................................... 3
4.1.2 Functional Definition of AEs .......................................................................................................... 5
4.1.3 Sequencing of Real-World Activities ............................................................................................. 6
4.2 AE SPECIFICATIONS ......................................................................................................................... 8
4.2.1 Storage SCU AE Specification ...................................................................................................... 8
4.2.2 Storage Commitment SCU AE Specification .............................................................................. 14
4.2.3 Q/R SCP AE Specification .......................................................................................................... 20
4.2.4 MWM SCU AE Specification ....................................................................................................... 30
4.2.5 MPPS SCU AE Specification ...................................................................................................... 37
4.2.6 Q/R SCU AE Specification .......................................................................................................... 44
4.2.7 Storage SCP AE Specification .................................................................................................... 51
4.2.8 Print SCU AE Specification ......................................................................................................... 57
4.3 NETWORK INTERFACES ................................................................................................................. 70
4.3.1 Physical Network Interface.......................................................................................................... 70
4.3.2 Additional Protocols .................................................................................................................... 70
4.4 CONFIGURATION ............................................................................................................................. 70
4.4.1 AE Title/Presentation Address Mapping ..................................................................................... 70
4.4.2 Parameters ................................................................................................................................. 71

5. MEDIA INTERCHANGE ........................................................................................... 75

5.1 IMPLEMENTATION MODEL ............................................................................................................. 75
5.1.1 Application Data Flow ................................................................................................................. 75
5.1.2 Functional Definition of AEs ........................................................................................................ 75
5.1.3 Sequencing of Real-World Activities ........................................................................................... 77
5.1.4 File Meta Information for Implementation Class and Version ..................................................... 78
5.2 AE SPECIFICATIONS ....................................................................................................................... 79
5.2.1 Offline-Media AE Specification.................................................................................................... 79
5.3 AUGMENTED AND PRIVATE APPLICATION PROFILES ............................................................... 90
5.3.1 Augmented Application Profiles .................................................................................................. 90
5.3.2 Private Application Profiles ......................................................................................................... 90
5.4 MEDIA CONFIGURATION ................................................................................................................ 93

6. SUPPORT OF CHARACTER SETS ......................................................................... 94

7. SECURITY................................................................................................................ 95

a
 No. MIICT0057EA

8. ANNEXES ................................................................................................................ 96
8.1 IOD CONTENTS ................................................................................................................................ 96
8.1.1 Created SOP Instances .............................................................................................................. 96
8.1.2 Usage of Attributes from received IOD’s................................................................................... 146
8.1.3 Attribute Mapping ...................................................................................................................... 146
8.1.4 Coerced/Modified Fields ........................................................................................................... 146
8.1.5 STRUCTURED REPORT DOCUMENT INFORMATIONS....................................................... 147
8.2 DATA DICTIONARY OF PRIVATE ATTRIBUTES .......................................................................... 155
8.3 CONTROLLED TERMINOLOGY AND TEMPLATES ..................................................................... 157
8.4 GRAYSCALE IMAGE CONSISTENCY ........................................................................................... 157
8.5 STANDARD EXTENDED/SPECIALIZED/PRIVATE SOP CLASSES ............................................. 158
8.5.1 Standard Extended SOP Class - CT Image Storage ................................................................ 158
8.5.2 Private SOP Class - Toshiba CT Non-Image Storage .............................................................. 159
8.6 PRIVATE TRANSFER SYNTAXES ................................................................................................. 162

*
b
 No. MIICT0057EA

3. INTRODUCTION

3.1 REVISION HISTORY

Document Date of Issue Author Description
Version
* January 20, 2013 TMSC First edition

3.2 AUDIENCE
This document is intended for hospital staff, health system integrators, software designers or implementers. It
is assumed that the reader has a working understanding of DICOM.

3.3 REMARKS
DICOM, by itself, does not guarantee interoperability. However, the Conformance Statement facilitates a
first-level validation for interoperability between different applications supporting the same DICOM
functionality.
This Conformance Statement is not intended to replace validation with other DICOM equipment to ensure
proper exchange of information intended.
The scope of this Conformance Statement is to facilitate communication with Toshiba Medical Systems and
other vendors’ Medical equipment. The Conformance Statement should be read and understood in
conjunction with the DICOM Standard [DICOM]. However, by itself it is not guaranteed to ensure the desired
interoperability and a successful interconnectivity.
The user should be aware of the following important issues:
— The comparison of different conformance statements is the first step towards assessing interconnectivity
between Toshiba Medical Systems and non- Toshiba Medical Systems equipment.
— Test procedures should be defined to validate the desired level of connectivity.
— The DICOM standard will evolve to meet the users’ future requirements. Toshiba Medical Systems is
actively involved in developing the standard further and therefore reserves the right to make changes to
its products or to discontinue its delivery.

1
 No. MIICT0057EA

3.4 DEFINITIONS, TERMS AND ABBREVIATIONS

Definitions, terms and abbreviations used in this document are defined within the different parts of the
DICOM standard.
Abbreviations and terms are as follows:
AE Application Entity
AET Application Entity Title
ASCE Association Control Service Element
CD-R Compact Disk Recordable
DIMSE DICOM Message Service Element
DVD A trademark of the DVD forum that is not an abbreviation
DVD-RAM DVD-Random Access
FSC File-Set Creator
FSU File-Set Updater
FSR File-Set Reader
IE Information Entity
IOD Information Object Definition
MPPS Modality Performed Procedure Step
MPPSR Modality Performed Procedure Step Retrieve
MSPS Modality Scheduled Procedure Step
MWM Modality Worklist Management
R Required Key Attribute
O Optional Key Attribute
PDU Protocol Data Unit
SCU Service Class User (DICOM client)
SCP Service Class Provider (DICOM server)
SOP Service-Object Pair
U Unique Key Attribute
UID Unique Identifier

3.5 REFERENCES
[DICOM] Digital Imaging and Communications in Medicine (DICOM), NEMA PS 3.1-3.18, 2004-2009

2
 No. MIICT0057EA

4. NETWORKING

4.1 IMPLEMENTATION MODEL

4.1.1 Application Data Flow

Remote AE
Responds
Verification

Remote AE
Send Storage SCU Receives
Images AE Images

Storage Remote AE
Commitment Handles Storage
SCU Commitment
AE

Handle Q/R SCP Remote AE

Q/R Requests AE Requests Q/R

MWM SCU Remote AE

Update
AE Provides
Worklist
Worklist Items

MPPS SCU Remote AE

Acquire Receives MPPS
Images AE
Create/Update

Query and Q/R SCU Remote AE

Retrieve AE Handles Q/R
Images Requests

Store Images Storage SCP

to the Local Remote AE
AE Sends Images
File System

Remote AE
Requests
Verification

Send Images
& Print Print SCU Remote AE
Management AE Prints Images
Information

DICOM Standard Interface

Figure 4.1-1
APPLICATION DATA FLOW DIAGRAM

3
 No. MIICT0057EA

— The Storage SCU AE sends images to a remote AE. It is associated with the local real-world activity
“Send Images”. “Send Images” is performed upon user request for specific images selected.
If the remote AE is configured as an archive device, the Storage SCU AE will send a storage commitment
request to the Storage Commitment SCU AE. The Storage SCU AE can also issue C-ECHO requests as
a Verification SCU.
— The Storage Commitment SCU AE will request Storage Commitment and if a commitment is successfully
obtained will record this information in the local database.
— The Q/R SCP AE handles incoming query and retrieve requests issued by a remote AE. It is associated
with the local real-world activity “Handle Q/R Requests”. “Handle Q/R Requests” handles retrieval
requests by issuing a command to the Storage SCU AE to send the requested Images to the destination
specified by the remote AE. The Q/R SCP AE functions as an SCP for C-FIND and C-MOVE requests.
— The MWM SCU AE receives Worklist information from a remote AE. It is associated with the local
real-world activity “Update Worklist”. When the “Update Worklist” is performed the MWM SCU AE
queries a remote AE for worklist items and provides the set of worklist items matching the query
request. ”Update Worklist” is performed as a result of an operator request.
— The MPPS SCU AE sends MPPS information to a remote AE. It is associated with the local real-world
activity “Acquire Images”. When the “Acquire Images” is performed the MPPS SCU AE creates and
updates Modality Performed Procedure Step instances managed by a remote AE. Acquisition of images
will result in automated creation of an MPPS Instance. Completion of the MPPS is performed as the
result of an operator action. If the remote AE is configured as an MPPSR SCP, the MPPS SCU AE can
receive MPPSR information.
— The Q/R SCU AE queries a remote AE for lists of studies, series and images and retrieves selected
studies, series or images. It is associated with the local real-world activity “Query and Retrieve Images”.
— The Storage SCP AE receives incoming images. It is associated with the local real-world activity “Store
Images to the Local File System”. “Store Images to the Local File System” stores the received images to
the local file system. The Storage SCP AE can also respond to C-ECHO requests as a Verification SCP.
— The Print SCU AE prints images on a remote AE (Printer). It is associated with the local real-world activity
“Send Images & Print Management Information”. “Send Images & Print Management Information”
creates a print-job within the print queue containing one or more virtual film sheets composed from
images selected by the user.

4
 No. MIICT0057EA

4.1.2 Functional Definition of AEs

4.1.2.1 Functional Definition of Storage SCU AE

The existence of a send-job queue entry with associated network destination will activate the Storage SCU
AE. An Association request is sent to the destination AE and upon successful negotiation of a Presentation
Context the image transfer is started. If the image transfer fails, the Storage SCU AE will retry this send-job
automatically. If the remote AE is configured as an archive device, the storage SCU AE will send a storage
commitment request to the Storage Commitment SCU AE. The Storage SCU AE can also issue C-ECHO
requests as a Verification SCU before the image transfer.

4.1.2.2 Functional Definition of Storage Commitment SCU AE

The Storage Commitment SCU AE will request Storage Commitment and if a commitment is successfully
obtained will record this information in the local database.

4.1.2.3 Functional Definition of Q/R SCP AE

The Q/R SCP AE waits for another application to connect at the presentation address configured for its
Application Entity Title. The Q/R SCP AE will accept Associations with Presentation Contexts for SOP Class
of the Query/Retrieve Service Class. It will handle query and retrieve requests on these Presentation
Contexts and respond with data objects with values corresponding to the contents of the local file system.
When a retrieval request is received, the Q/R SCP AE issues a command to the Storage SCU AE to send the
specified images to the destination.

4.1.2.4 Functional Definition of MWM SCU AE

The MWM SCU AE attempts to download a worklist from a remote node. If the MWM SCU AE establishes an
Association to a remote AE, it will transfer patient’s information and worklist items via the open Association.
The results will be displayed in a separate list. The patient’s information will be used for the patient
registration.

4.1.2.5 Functional Definition of MPPS SCU AE

The MPPS SCU AE performs the creation of an MPPS Instance automatically whenever images are
acquired. Further updates on the MPPS data can be performed automatically or interactively. If the remote
AE is configured as an MPPSR SCP, the MPPS SCU AE can receive MPPSR information.

4.1.2.6 Functional Definition of Q/R SCU AE

The Q/R SCU AE is activated when the user selects a remote node to query and enters some key
information, Patient’s Name, Patient ID and/or Study Date. The user can select studies, series and images to
be retrieved. The images will be received at the Storage SCP AE.

4.1.2.7 Functional Definition of Storage SCP AE

The Storage SCP AE waits for another application to connect at the presentation address configured for its
Application Entity Title. The Storage SCP AE will accept Associations with Presentation Contexts for SOP
Classes of the Verification and Storage Service Classes. Any images received on such Presentation
Contexts will be stored to the local file system.

4.1.2.8 Functional Definition of Print SCU AE

The existence of a print-job in the print queue will activate the Print SCU AE. An Association is established
with the printer and the printer’s status determined. If the printer is operating normally, the film sheets
described within the print-job will be printed. If the printer is not operating normally, an error message will be
displayed and this print-job can be canceled or restarted by the user operations.

5
 No. MIICT0057EA

4.1.3 Sequencing of Real-World Activities

Storage
Print Storage Q/R Q/R Storage Commitment MPPS MWM Department Image Viewer Printer
SCU SCP SCU SCP SCU SCU SCU SCU Scheduler Server

1. Query Worklist

2. Receive Worklist

3. Select Workitem (MSPS)

4. Start Acquisition (Create MPPS)

5. Acquire Images

6. Receive MPPSR Information

7. Complete Acquisition (Finalize MPPS)

8. Store Acquired Images

9. Commit Acquired Images

10. Q/R Requests by a Remote AE

11. Send Images

12. Query/Retrieve Images

13. Receive Images

14. Print Images

15. Start Creating GSPS (Create MPPS)

16. Create GSPS

17. Receive MPPSR Information

18. Complete Creating GSPS (Finalize MPPS)

19. Store Created GSPS

20. Commit Created GSPS

Figure 4.1-2
SEQUENCING CONSTRAINTS

6
 No. MIICT0057EA

Under typical scheduled workflow conditions the sequencing constraints illustrated in Figure 4.1-2 apply:
1. Query Worklist

2. Receive Worklist of Modality Scheduled Procedure Steps (MSPS)

3. Select Workitem (MSPS) from Worklist

4. Start Acquisition and Create MPPS

5. Acquire Images

6. Receive MPPSR Information

7. Complete Acquisition and Finalize MPPS

8. Store Acquired Images

9. Commit Acquired Images

10. Q/R Requests by a Remote AE

11. Send Images

12. Query/Retrieve Images

13. Receive Images

14. Print Images

15. Start Creating GSPS and Create MPPS

16. Create GSPS

17. Receive MPPSR Information

18. Complete Creating GSPS and Finalize MPPS

19. Store Created GSPS

20. Commit Created GSPS

Other workflow situations (e.g. unscheduled procedure steps) will have other sequencing constraints. Some
activities may be omitted according to situations.

7
 No. MIICT0057EA

4.2 AE SPECIFICATIONS

4.2.1 Storage SCU AE Specification

4.2.1.1 SOP Classes

The Storage SCU AE provides Standard Conformance to the following SOP Classes:
Table 4.2-1
SOP CLASSES FOR THE STORAGE SCU AE

SOP Class Name SOP Class UID SCU SCP

Verification 1.2.840.10008.1.1 Yes No
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Yes No
Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 Yes No
Standalone Curve Storage 1.2.840.10008.5.1.4.1.1.9 Yes No
Enhanced CT Image Storage 1.2.840.10008.5.1.4.1.1.2.1 Yes No
Grayscale Softcopy Presentation State 1.2.840.10008.5.1.4.1.1.11.1 Yes No
Storage
Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 Yes No
X-Ray Radiation Dose SR Storage 1.2.840.10008.5.1.4.1.1.88.67 Yes No
Segmentation Storage 1.2.840.10008.5.1.4.1.1.66.4 Yes No

4.2.1.2 Association Policies

4.2.1.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-2
DICOM APPLICATION CONTEXT FOR THE STORAGE SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.1.2.2 Number of Associations

The Storage SCU AE can initiate up to two Associations at a time for each destination to which a transfer
request is being processed in the active job queue list. Up to two jobs, that images will be sent to the different
remote hosts, will be active at a time, the other remains pending until the active job is completed or failed.
Table 4.2-3
NUMBER OF ASSOCIATIONS INITIATED FOR THE STORAGE SCU AE

Maximum number of simultaneous Associations 2

8
 No. MIICT0057EA

4.2.1.2.3 Asynchronous Nature

The Storage SCU AE does not support asynchronous communication (multiple outstanding transactions over
a single Association).
Table 4.2-4
ASYNCHRONOUS NATURE FOR THE STORAGE SCU AE

Maximum number of outstanding asynchronous transactions 1

4.2.1.2.4 Implementation Identifying Information

The implementation information for the Storage SCU AE is:

Table 4.2-5
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE STORAGE SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

9
 No. MIICT0057EA

4.2.1.3 Association Initiation Policy

4.2.1.3.1 Activity – Send Images

4.2.1.3.1.1 Description and Sequencing of Activities

The Storage SCU AE attempts to initiate a new Association in order to issue a Verification request (C-ECHO)
if needed.
The Storage SCU AE attempts to initiate a new Association in order to issue a Storage request (C-STORE). If
the job contains multiple images then multiple C-STORE requests will be issued over the same Association.
If the image transfer fails, the Storage SCU AE will retry this send-job automatically.
Storage SCU Image
AE Server

1. Open Association

2. C-ECHO Request (Verification)

3. Close Association

4. Open Association

5. C-STORE Request (Storage)

6. Close Association

Figure 4.2-1
SEQUENCING OF ACTIVITY – SEND IMAGES

A possible sequence of interactions between the Storage SCU AE and an Image Server (e.g. a storage or
archive device supporting the Verification and Storage SOP Classes as an SCP) is illustrated in the Figure
above:

1. The Storage SCU AE opens an Association with the Image Server.

2. The Storage SCU AE issues a Verification request (C-ECHO) and the Image Server replies with a
C-ECHO response (status success).

3. The Storage SCU AE closes the Association with the Image Server.

4. The Storage SCU AE opens an Association with the Image Server

5. Acquired images are transmitted to the Image Server using a Storage request (C-STORE) and the
Image Server replies with a C-STORE response (status success).

6. The Storage SCU AE closes the Association with the Image Server.

10
 No. MIICT0057EA

4.2.1.3.1.2 Proposed Presentation Contexts

The Storage SCU AE is capable of proposing the Presentation Contexts shown in the following table:
Table 4.2-6
PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY SEND IMAGES

Presentation Context Table

Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List
Verification 1.2.840.10008.1.1 Implicit VR Little Endian 1.2.840.10008.1.2 SCU None
Implicit VR Little Endian 1.2.840.10008.1.2
Explicit VR Little Endian 1.2.840.10008.1.2.1
1.2.840.10008.5.1. Explicit VR Big Endian 1.2.840.10008.1.2.2
CT Image Storage SCU None
4.1.1.2 JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.
der Prediction (Process 70
14 [Selection Value 1])
Implicit VR Little Endian 1.2.840.10008.1.2
Explicit VR Little Endian 1.2.840.10008.1.2.1
Secondary Capture 1.2.840.10008.5.1. Explicit VR Big Endian 1.2.840.10008.1.2.2
SCU None
Image Storage 4.1.1.7 JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.
der Prediction (Process 70
14 [Selection Value 1])
Implicit VR Little Endian 1.2.840.10008.1.2
Standalone Curve 1.2.840.10008.5.1.
Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
Storage 4.1.1.9
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Explicit VR Little Endian 1.2.840.10008.1.2.1
Enhanced CT Image 1.2.840.10008.5.1. Explicit VR Big Endian 1.2.840.10008.1.2.2
SCU None
Storage 4.1.1.2.1 JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.
der Prediction (Process 70
14 [Selection Value 1])

Grayscale Softcopy Implicit VR Little Endian 1.2.840.10008.1.2

1.2.840.10008.5.1.
Presentation State Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
4.1.1.11.1
Storage Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Enhanced SR 1.2.840.10008.5.1.
Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
Storage 4.1.1.88.22
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
X-Ray Radiation 1.2.840.10008.5.1.
Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
Dose SR Storage 4.1.1.88.67
Explicit VR Big Endian 1.2.840.10008.1.2.2
Segmentation 1.2.840.10008.5.1. Implicit VR Little Endian 1.2.840.10008.1.2
SCU None
Storage 4.1.1.66.4 Explicit VR Little Endian 1.2.840.10008.1.2.1
Explicit VR Big Endian 1.2.840.10008.1.2.2

11
 No. MIICT0057EA

4.2.1.3.1.3 SOP Specific Conformance for Verification SOP Class

The Storage SCU AE provides standard conformance to the Verification Service Class as an SCU. It is
initiated automatically at the “Send Images” activity.
The behavior of Storage SCU AE when encountering status codes in a C-ECHO response is summarized in
the Table below:
Table 4.2-7
VERIFICATION C-ECHO RESPONSE STATUS HANDLING BEHAVIOR

Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The Storage SCU AE judges the remote AE is present and
active on the network.

The behavior of Storage SCU AE during communication failure is summarized in the Table below:
Table 4.2-8
VERIFICATION COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the
send job is marked as failed. The reason is logged
and the job failure is reported to the user via the job
control application.
Association aborted by the SCP or network layers The send job is marked as failed. The reason is
logged and the job failure is reported to the user via
the job control application.

12
 No. MIICT0057EA

4.2.1.3.1.4 SOP Specific Conformance for Storage SOP Classes

The Storage SCU AE provides standard conformance to the Storage Service Class as an SCU.
The behavior of Storage SCU AE when encountering status codes in a C-STORE response is summarized in
the Table below:
Table 4.2-9
STORAGE C-STORE RESPONSE STATUS HANDLING BEHAVIOR

Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has successfully stored the SOP Instance. If all
SOP Instances in a send job have status success then the
job is marked as complete.
Refused Out of Resources A7xx The Association is aborted using A-ABORT and the send job
is marked as failed. The status meaning is logged and the
job failure is reported to the user via the job control
application. This is a transient failure.
Error Data Set does not A9xx The Association is aborted using A-ABORT and the send job
match SOP Class is marked as failed. The status meaning is logged and the
job failure is reported to the user via the job control
application.
Error Cannot Understand Cxxx The Association is aborted using A-ABORT and the send job
is marked as failed. The status meaning is logged and the
job failure is reported to the user via the job control
application.
Warning Coercion of Data B000 Image transmission is considered successful if it is
Elements configured that the status would be considered successful.
Warning Data Set does not B007 Image transmission is considered successful if it is
match SOP Class configured that the status would be considered successful.
Warning Elements Discarded B006 Image transmission is considered successful if it is
configured that the status would be considered successful.
* * Any The Association is aborted using A-ABORT and the send job
other is marked as failed. The status code is logged and the job
status failure is reported to the user via the job control application.
code.

The behavior of Storage SCU AE during communication failure is summarized in the Table below:
Table 4.2-10
STORAGE COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the
send job is marked as failed. The reason is logged
and the job failure is reported to the user via the job
control application.
Association aborted by the SCP or network layers The send job is marked as failed. The reason is
logged and the job failure is reported to the user via
the job control application.

If the image transfer fails, the Storage SCU AE will retry this send-job automatically. The delay between
resending failed jobs and the number of retries is also configurable.
The contents of Image Storage SOP Instances created by the Storage SCU AE conform to the DICOM
Image IOD definitions and are described in section 8.1.

13
 No. MIICT0057EA

4.2.2 Storage Commitment SCU AE Specification

4.2.2.1 SOP Classes

The Storage Commitment SCU AE provides Standard Conformance to the following SOP Classes:
Table 4.2-11
SOP CLASSES FOR THE STORAGE COMMITMENT SCU AE

SOP Class Name SOP Class UID SCU SCP

Storage Commitment Push Model 1.2.840.10008.1.20.1 Yes No

4.2.2.2 Association Policies

4.2.2.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-12
DICOM APPLICATION CONTEXT FOR THE STORAGE COMMITMENT SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.2.2.2 Number of Associations

The Storage Commitment SCU AE initiates one Association at a time.
Table 4.2-13
NUMBER OF ASSOCIATIONS INITIATED FOR THE STORAGE COMMITMENT SCU AE

Maximum number of simultaneous Associations 1

The Storage Commitment SCU AE accepts Associations to receive N-EVENT-REPORT notifications for the
Storage Commitment Push Model SOP Class.
Table 4.2-14
NUMBER OF ASSOCIATIONS ACCEPTED FOR THE STORAGE COMMITMENT SCU AE

Maximum number of simultaneous Associations 3

4.2.2.2.3 Asynchronous Nature

The Storage Commitment SCU AE does not support asynchronous communication (multiple outstanding
transactions over a single Association).
Table 4.2-15
ASYNCHRONOUS NATURE FOR THE STORAGE COMMITMENT SCU AE

Maximum number of outstanding asynchronous transactions 1

4.2.2.2.4 Implementation Identifying Information

The implementation information for the Storage Commitment SCU AE is:
Table 4.2-16
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE STORAGE COMMITMENT SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

14
 No. MIICT0057EA

4.2.2.3 Association Initiation Policy

4.2.2.3.1 Activity – Commit Sent Images

4.2.2.3.1.1 Description and Sequencing of Activities

If the remote AE is configured as an archive device the Storage Commitment SCU AE will, after all images
have been sent, transmit a single Storage Commitment request (N-ACTION). Upon receiving the N-ACTION
response the Storage Commitment SCU AE will release the Association. The notification of Storage
commitment (N-EVENT-REPORT) will be received over a separate Association.
Storage Image
Commitment Server
SCU AE

1. Open Association

2. N-ACTION Request (Storage Commitment)

3. Close Association

Figure 4.2-2
SEQUENCING OF ACTIVITY – COMMIT SENT IMAGES

A possible sequence of interactions between the Storage Commitment SCU AE and an Image Server (e.g. a
storage or archive device supporting the Storage Commitment SOP Classes as an SCP) is illustrated in the
Figure above:

1. The Storage Commitment SCU AE opens an Association with the Image Server.

2. A Storage Commitment request (N-ACTION) is transmitted to the Image Server to obtain Storage
Commitment of previously transmitted images. The Image Server replies with an N-ACTION
response indicating the request has been received and is being processed.

3. The Storage Commitment AE closes the Association with the Image Server.

NOTE: The N-EVENT-REPORT will be sent over a separate Association initiated by the Image Server (see Section
4.2.2.4.1).

4.2.2.3.1.2 Proposed Presentation Contexts

The Storage Commitment SCU AE is capable of proposing the Presentation Contexts shown in the following
table:
Table 4.2-17
PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY COMMIT SENT IMAGES

Presentation Context Table

Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List

Storage Commitment 1.2.840.10008.1.

Implicit VR Little Endian 1.2.840.10008.1.2 SCU None
Push Model 20.1

Only one remote AE is configured as the Storage Commitment Push Mode SCP.

15
 No. MIICT0057EA

4.2.2.3.1.3 SOP Specific Conformance for Storage Commitment SOP Class

4.2.2.3.1.3.1 Storage Commitment Operations (N-ACTION)

The Storage Commitment SCU AE provides standard conformance to the Storage Commitment Service
Class as an SCU.
The Storage Commitment SCU AE will request storage commitment for instances of the Storage SOP
Classes if the remote AE is configured as an archive device and a presentation context for the Storage
Commitment Push Model has been accepted.
The behavior of Storage SCU Commitment AE when encountering status codes in a N-ACTION response is
summarized in the Table below:
Table 4.2-18
STORAGE COMMITMENT N-ACTION RESPONSE STATUS HANDLING BEHAVIOR

Service Further Status

Behavior
Status Meaning Code
Success Success 0000 The request for storage commitment is considered successfully sent. A
timer is started which will expire if no N-EVENT-REPORT for the
Transaction UID is received within a configurable timeout period.
* * Any other The Association is aborted using A-ABORT and the request for storage
status commitment is marked as failed.
code.

The behavior of Storage Commitment AE during communication failure is summarized in the Table below:
Table 4.2-19
STORAGE COMMITMENT COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the
send job is marked as failed. The reason is logged
and the job failure is reported to the user via the job
control application.
Association aborted by the SCP or network layers The send job is marked as failed. The reason is
logged and the job failure is reported to the user via
the job control application.

16
 No. MIICT0057EA

4.2.2.4 Association Acceptance Policy

4.2.2.4.1 Activity – Receive Storage Commitment Response

4.2.2.4.1.1 Description and Sequencing of Activities

The Storage Commitment SCU AE will accept Associations in order to receive responses to a Storage
Commitment Request.

Storage Image
Commitment Server
SCU AE
1. Open Association

2. N-EVENT-REPORT (Storage Commitment Response)

3. Close Association

Figure 4.2-3
SEQUENCING OF ACTIVITY - RECEIVE STORAGE COMMITMENT RESPONSE

A possible sequence of interactions between the Storage Commitment SCU AE and an Image Server (e.g. a
storage or archive device supporting Storage Commitment SOP Classes as an SCP) is illustrated in the
Figure above:

1. The Image Server opens a new Association with the Storage Commitment SCU AE.

2. The Image Server sends an N-EVENT-REPORT request notifying the Storage SCU AE of the status
of a previous Storage Commitment Request. The Storage SCU AE replies with a
N-EVENT-REPORT response confirming receipt.

3. The Image Server closes the Association with the Storage Commitment SCU AE.

The Storage Commitment SCU AE may reject Association attempts as shown in the Table below. The
Result, Source and Reason/Diag columns represent the values returned in the appropriate fields of an
ASSOCIATE-RJ PDU (see PS 3.8, Section 9.3.4). The contents of the Source column is abbreviated to save
space and the meaning of the abbreviations are:

a) 1 – DICOM UL service-user

b) 2 – DICOM UL service-provider (ASCE related function)

c) 3 – DICOM UL service-provider (Presentation related function)

17
 No. MIICT0057EA

Table 4.2-20
ASSOCIATION REJECTION REASONS

Result Source Reason/Diag Explanation

2– c 2– The (configurable) maximum number of
rejected-transient local-limit-exceeded simultaneous Associations has been reached.
An Association request with the same
parameters may succeed at a later time.
2– c 1– No Associations can be accepted at this time
rejected-transient temporary-congestion due to the real-time requirements of higher
priority activities (e.g. during image acquisition no
Associations will be accepted) or because
insufficient resources are available (e.g. memory,
processes, threads). An Association request
with the same parameters may succeed at a
later time.
1– a 2– The Association request contained an
rejected-permanent application-context-na unsupported Application Context Name. An
me-not-supported Association request with the same parameters
will not succeed at a later time.
1– a 7– The Association request contained an
rejected-permanent called-AE-title-not-reco unrecognized Called AE Title. An Association
gnized request with the same parameters will not
succeed at a later time unless configuration
changes are made. This rejection reason
normally occurs when the Association initiator is
incorrectly configured and attempts to address
the Association acceptor using the wrong AE
Title.
1– a 3– The Association request contained an
rejected-permanent calling-AE-title-not-rec unrecognized Calling AE Title. An Association
ognized request with the same parameters will not
succeed at a later time unless configuration
changes are made. This rejection reason
normally occurs when the Association acceptor
has not been configured to recognize the AE
Title of the Association initiator.
1– b 1 – no-reason-given The Association request could not be parsed.
rejected-permanent An Association request with the same format will
not succeed at a later time.

18
 No. MIICT0057EA

4.2.2.4.1.2 Accepted Presentation Contexts

The Storage Commitment SCU AE will accept Presentation Contexts as shown in the Table below.
Table 4.2-21
ACCEPTABLE PRESENTATION CONTEXTS FOR
ACTIVITY RECEIVE STORAGE COMMITMENT RESPONSE

Presentation Context Table

Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List

Storage Commitment 1.2.840.10008.1.

Implicit VR Little Endian 1.2.840.10008.1.2 SCU None
Push Model 20.1

4.2.2.4.1.3 SOP Specific Conformance for Storage Commitment SOP Class

4.2.2.4.1.3.1 Storage Commitment Notifications (N-EVENT-REPORT)

The Storage Commitment SCU AE provides standard conformance to the Storage Commitment Service
Class as an SCU.
The behavior of Storage Commitment SCU AE when receiving Event Types within the N-EVENT-REPORT is
summarized in the Table below.
Table 4.2-22
STORAGE COMMITMENT N-EVENT-REPORT BEHAVIOUR

Event Type Name Event Behavior

Type ID
Storage Commitment 1
Request Successful The Storage Commitment SCU AE permits the operator(s) to delete
the Referenced SOP Instances under Referenced SOP Sequence
(0018,1199), or deletes the Instances from the local database
automatically.
Storage Commitment 2
Request Complete – The Storage Commitment SCU AE requests the Storage SCU AE to
Failures Exist send the Referenced SOP Instances under Failed SOP Sequence
(0018,1198).

The reasons for returning specific status codes in a N-EVENT-REPORT response are summarized in the
Table below.
Table 4.2-23
STORAGE COMMITMENT N-EVENT-REPORT RESPONSE STATUS REASONS

Service Further Status

Reasons
Status Meaning Code
Success Success 0000 The storage commitment result has been successfully received.
Failure Unrecognized 0211H The Transaction UID in the N-EVENT-REPORT request is not
Operation recognized (was never issued within an N-ACTION request).
Failure Invalid 0115H One or more SOP Instance UIDs with the Referenced SOP Sequence
Argument (0008,1199) or Failed SOP Sequence (0008,1198) was not included in
Value the Storage Commitment Request associated with this Transaction UID.
The unrecognized SOP Instance UIDs will be returned within the Event
Information of the N-EVENT-REPORT response.

19
 No. MIICT0057EA

4.2.3 Q/R SCP AE Specification

4.2.3.1 SOP Classes

The Q/R SCP AE provides Standard Conformance to the following SOP Classes:
Table 4.2-24
SOP CLASSES FOR THE Q/R SCP AE

SOP Class Name SOP Class UID SCU SCP

Patient Root Q/R Information Model – Find 1.2.840.10008.5.1.4.1.2.1.1 No Yes
Patient Root Q/R Information Model – Move 1.2.840.10008.5.1.4.1.2.1.2 No Yes
Study Root Q/R Information Model – Find 1.2.840.10008.5.1.4.1.2.2.1 No Yes
Study Root Q/R Information Model – Move 1.2.840.10008.5.1.4.1.2.2.2 No Yes
Patient/Study Only Q/R Information Model – Find 1.2.840.10008.5.1.4.1.2.3.1 No Yes
Patient/Study Only Q/R Information Model – Move 1.2.840.10008.5.1.4.1.2.3.2 No Yes

4.2.3.2 Association Policies

4.2.3.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-25
DICOM APPLICATION CONTEXT FOR THE Q/R SCP AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.3.2.2 Number of Associations

The Q/R SCP AE can support up to three Associations at a time.
Table 4.2-26
NUMBER OF ASSOCIATIONS ACCEPTED FOR THE Q/R SCP AE

Maximum number of simultaneous Associations 3

4.2.3.2.3 Asynchronous Nature

The Q/R SCP AE does not support asynchronous communication (multiple outstanding transactions over a
single Association).
Table 4.2-27
ASYNCHRONOUS NATURE FOR THE Q/R SCP AE

Maximum number of outstanding asynchronous transactions 1

4.2.3.2.4 Implementation Identifying Information

The implementation information for the Q/R SCP AE is:
Table 4.2-28
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE Q/R SCP AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

20
 No. MIICT0057EA

4.2.3.3 Association Initiation Policy

The Q/R SCP AE does not initiate Associations.

4.2.3.4 Association Acceptance Policy

4.2.3.4.1 Activity – Handle Q/R Requests

4.2.3.4.1.1 Description and Sequencing of Activities

The Q/R SCP AE accepts Associations only if they have valid Presentation Contexts. If none of the requested
Presentation Contexts are accepted then the Association Request itself is rejected. It can be configured to
only accept Associations with certain hosts (using TCP/IP address) and/or Application Entity Titles.
If the Q/R SCP AE receives a query (C-FIND) request then the response(s) will be sent over the same
Association used to send the C-FIND-Request.
If the Q/R SCP AE receives a retrieval (C-MOVE) request then the responses will be sent over the same
Association used to send the C-MOVE-Request. The Q/R SCP AE will notify the Storage SCU AE to send the
requested SOP Instances to the C-MOVE Destination AE. The Storage SCU AE notifies the Q/R SCP AE of
the success or failure of each attempt to send a Composite SOP Instance to the peer C-MOVE Destination
AE. The Q/R SCP AE then sends a C-MOVE Response indicating this status after each attempt. Once the
Storage SCU AE has finished attempting to transfer all the requested SOP Instances, the Q/R SCP AE sends
a final C-MOVE Response indicating the overall status of the attempted retrieval.
Storage SCU Q/R SCP Q/R SCU C-MOVE
AE AE AE Destination AE

1. Open Association

2. Peer AE Queries for Patient, Study, Series, or Image Information

3. Return Patient, Study, Series, or Image Information

4. Close Association

Notification of 5. Open Association

Images to be
sent to C-MOVE
6. Peer AE Requests Retrieval of Studies, Series, or Images
Destination AE
in Response

7.Open Association

Repeat …

8. Image or GSPS Sent to C-MOVE Destination

Notification of
success or failure
for each attempt
9. C-MOVE-RSP sent for each Image or GSPS Sent

10. Close Association

11. Final C-MOVE-RSP sent

12. Close Association

Figure 4.2-4
SEQUENCING OF ACTIVITY – HANDLE Q/R REQUESTS

21
 No. MIICT0057EA

The following sequencing constraints illustrated in the Figure above:

1. The Q/R SCU AE opens an Association with the Q/R SCP AE.

2. The Q/R SCU AE sends a C-FIND-RQ Message

3. The Q/R SCP AE returns a C-FIND-RSP Message to the Q/R SCU AE with matching information. A
C-FIND-RSP is sent for each entity matching the identifier specified in the C-FIND-RQ. A final
C-FIND-RSP is sent indicating that the matching is complete.

4. The Q/R SCU AE closes the Association.

5. The Q/R SCU AE opens an Association with the Q/R SCP AE.

6. The Q/R SCU AE sends a C-MOVE-RQ Message. The Q/R SCP AE notifies the Storage SCU AE to
send the Composite SOP Instances to the peer C-MOVE Destination AE as indicated in the
C-MOVE-RQ.

7. The Storage SCU AE opens an Association with the C-MOVE Destination AE.

8. The Storage SCU AE sends images to the C-MOVE Destination AE. The Storage SCU AE indicates
to the Q/R SCP AE whether the transfer succeeded or failed.
9. The Q/R SCP AE then returns a C-MOVE-RSP indicating this success or failure.

10. The Storage SCU AE closes the Association.

11. The Q/R SCP AE sends a final C-MOVE-RSP indicating the overall success or failure of the retrieval.

12. The Q/R SCU AE closes the Association.

The Q/R SCP AE may reject Association attempts as shown in the table below. The Result, Source and
Reason/Diag columns represent the values returned in the corresponding fields of an ASSOCIATE-RJ PDU
(see PS 3.8, Section 9.3.4). The following abbreviations are used in the Source column:

a. 1 – DICOM UL service-user

b. 2 – DICOM UL service-provider (ASCE related function)

c. 3 – DICOM UL service-provider (Presentation related function)

22
 No. MIICT0057EA

Table 4.2-29
ASSOCIATION REJECTION REASONS

Result Source Reason/Diag Explanation

2– c 2 – local-limit-exceeded The (configurable) maximum number of
rejected-transient simultaneous Associations has been
reached. An Association request with the
same parameters may succeed at a later
time.
2– c 1 – temporary-congestion No Associations can be accepted at this
rejected-transient time due to the real-time requirements of
higher priority activities (e.g. during image
acquisition no Associations will be
accepted) or because insufficient resources
are available (e.g. memory, processes,
threads). An Association request with the
same parameters may succeed at a later
time.
1– a 2– The Association request contained an
rejected-permanent application-context-name-no unsupported Application Context Name.
t-supported An association request with the same
parameters will not succeed at a later time.
1– a 7– The Association request contained an
rejected-permanent called-AE-title-not-recognize unrecognized Called AE Title. An
d Association request with the same
parameters will not succeed at a later time
unless configuration changes are made.
This rejection reason normally occurs when
the Association initiator is incorrectly
configured and attempts to address the
Association acceptor using the wrong AE
Title.
1– a 3– The Association request contained an
rejected-permanent calling-AE-title-not-recognize unrecognized Calling AE Title. An
d Association request with the same
parameters will not succeed at a later time
unless configuration changes are made.
This rejection reason normally occurs when
the Association acceptor has not been
configured to recognize the AE Title of the
Association initiator.
1– b 1 – no-reason-given The Association request could not be
rejected-permanent parsed. An Association request with the
same format will not succeed at a later time.

23
 No. MIICT0057EA

4.2.3.4.1.2 Accepted Presentation Contexts

The default Behavior of the Q/R SCP AE supports the Implicit VR Little Endian and Explicit VR Big Endian
Transfer Syntaxes for all Associations.
If the both Transfer Syntaxes are proposed per Presentation Context then the Q/R SCP AE will select Explicit
VR Big Endian Transfer Syntax.
Any of the Presentation Contexts shown in the following table are acceptable to the Q/R SCP AE.
Table 4.2-30
ACCEPTED PRESENTATION CONTEXTS BY THE Q/R SCP AE

Presentation Context Table

Abstract Syntax Transfer Syntax Role Ext.
Name UID Name UID Neg.

Patient Root Implicit VR Little Endian 1.2.840.10008.1.2

1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.1.1
Model - FIND Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Patient Root
1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.1.2
Model - MOVE
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Study Root
1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.2.1
Model - FIND
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Study Root
1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.2.2
Model - MOVE
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Patient/Study Only
1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.3.1
Model - FIND
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Patient/Study Only
1.2.840.10008.5.1.4.
Q/R Information Explicit VR Little Endian 1.2.840.10008.1.2.1 SCP None
1.2.3.2
Model - MOVE
Explicit VR Big Endian 1.2.840.10008.1.2.2

24
 No. MIICT0057EA

4.2.3.4.1.3 SOP Specific Conformance for Q/R Find SOP Classes

The Q/R SCP AE provides standard conformance to the Query/Retrieve Find SOP Class as an SCP.
It supports hierarchical queries and not relational queries.
Table 4.2-31
PATIENT ROOT C-FIND SCP SUPPORTED ELEMENTS

Level Name Types of

Tag VR
Attribute Name Matching
Patient Level
Patient's Name (0010,0010) PN S,*,U
Patient ID (0010,0020) LO S,*,U
Patient's Sex (0010,0040) CS S,*,U
Study Level
Study Date (0008,0020) DA S,R,U
Study Time (0008,0030) TM R,U
Accession Number (0008,0050) SH S,*,U
Patient’s Age (0010,1010) AS S,*,U
Study Instance UID (0020,000D) UI S,*,U
Study ID (0020,0010) SH S,*,U
Number of Study Related Series (0020,1206) IS S,*,U
Number of Study Related Instances (0020,1208) IS S,*,U
Series Level
Modality (0008,0060) CS S,*,U
Series Number (0020,0011) IS S,*,U
Series Instance UID (0020,000E) UI S,*,U
Instance Level
SOP Instance UID (0008,0018) UI S,*,U
Acquisition Date (0008,0022) DA S,*,U
Contrast/Bolus Agent (0018,0010) LO S,*,U
Scanning Sequence (0018,0020) CS S,*,U
Slice Thickness (0018,0050) DS S,*,U
KVP (0018,0060) DS S,*,U
X-ray Tube Current (0018,1151) IS S,*,U
Convolution Kernel (0018,1210) SH S,*,U
Instance Number (0020,0013) IS S,*,U

25
 No. MIICT0057EA

Table 4.2-32
STUDY ROOT C-FIND SCP SUPPORTED ELEMENTS

Level Name Types of

Tag VR
Attribute Name Matching
Study Level
Study Date (0008,0020) DA S,R,U
Study Time (0008,0030) TM R,U
Accession Number (0008,0050) SH S,*,U
Patient's Name (0010,0010) PN S,*,U
Patient ID (0010,0020) LO S,*,U
Patient's Sex (0010,0040) CS S,*,U
Patient’s Age (0010,1010) AS S,*,U
Study Instance UID (0020,000D) UI S,*,U
Study ID (0020,0010) SH S,*,U
Number of Study Related Series (0020,1206) IS S,*,U
Number of Study Related Instances (0020,1208) IS S,*,U
Series Level
Modality (0008,0060) CS S,*,U
Series Number (0020,0011) IS S,*,U
Series Instance UID (0020,000E) UI S,*,U
Instance Level
SOP Instance UID (0008,0018) UI S,*,U
Instance Number (0020,0013) IS S,*,U
Acquisition Date (0008,0022) DA S,R,U
Contrast/Bolus Agent (0018,0010) LO S,*,U
Scanning Sequence (0018,0020) CS S,*,U
Slice Thickness (0018,0050) DS S,*,U
KVP (0018,0060) DS S,*,U
X-ray Tube Current (0018,1151) IS S,*,U
Convolution Kernel (0018,1210) SH S,*,U
Instance Number (0020,0013) IS S,*,U

26
 No. MIICT0057EA

Table 4.2-33
PATIENT/STUDY ONLY C-FIND SCP SUPPORTED ELEMENTS

Level Name Types of

Tag VR
Attribute Name Matching
Patient Level
Patient's Name (0010,0010) PN S,*,U
Patient ID (0010,0020) LO S,*,U
Patient's Sex (0010,0040) CS S,*,U
Study Level
Study Date (0008,0020) DA S,R,U
Study Time (0008,0030) TM R,U
Accession Number (0008,0050) SH S,*,U
Patient’s Age (0010,1010) AS S,*,U
Study Instance UID (0020,000D) UI S,*,U
Study ID (0020,0010) SH S,*,U
Number of Study Related Series (0020,1206) IS S,*,U
Number of Study Related Instances (0020,1208) IS S,*,U

The tables should be read as follows:

Attribute Name: Attributes supported for returned C-FIND Responses.
Tag: Appropriate DICOM tag for this attribute.
VR: Appropriate DICOM VR for this attribute.
Types of Matching: The types of Matching supported by the C-FIND SCP.
A "S" indicates the identifier attribute can specify Single Value Matching, a “R”
will indicate Range Matching, an “*” will denote wildcard matching, and a “U”
will indicate universal matching.
Note:
The Q/R SCP AE supports Default Character Repertoire only.

27
 No. MIICT0057EA

The Q/R SCP AE returns C-FIND response status as specified below.

Table 4.2-34
THE Q/R SCP AE C-FIND RESPONSE STATUS RETURN BEHAVIOR

Service Status
Further Meaning Behavior
Status Code
Success Success 0000 Matching is complete. No final identifier is supplied.
Refused Out of Resources A700 System reached the limit in disk space or memory
usage.
Error message is output to as an alert to the User
Interface, and to the Service Log.
Failed Identifier does not A900 The C-FIND query identifier contains invalid
match SOP Class Elements or values, or is missing mandatory
Elements or values for the specified SOP Class.
Error message is output to the Service Log.
Unable to process C000 The C-FIND query identifier is valid for the specified
SOP Class but cannot be used to query the
database. For example, this can occur if received
data contains unsupported character sets. (See
section 6 ‘SUPPORT OF CHARACTER SET’.)
Cancel Matching terminated FE00 The C-FIND SCU sent a Cancel Request. This has
due to Cancel Request been acknowledged and the search for matches has
been halted.
Pending Matches are continuing FF00 Indicates that the search for further matches is
and current match is continuing. This is returned when each successful
supplied. match is returned and when further matches are
forthcoming. This status code is returned if all
Optional keys in the query identifier are actually
supported.
Matches are continuing FF01 Indicates that the search for further matches is
but one or more continuing. This is returned when each successful
Optional Keys were not match is returned and when further matches are
supported. forthcoming. This status code is returned if there
are Optional keys in the query identifier that are not
supported.

28
 No. MIICT0057EA

4.2.3.4.1.4 SOP Specific Conformance for Q/R Move SOP Classes

The Q/R SCP AE provides standard conformance to the Query/Retrieve Move SOP Classes as an SCP.
The Q/R SCP AE will convey to the Storage SCU AE that an Association with a DICOM Application Entity
named by the external C-MOVE SCU (through a MOVE Destination AE Title) should be established. It will
also convey to the Storage SCU AE to perform C-STORE operations on specific images requested by the
external C-MOVE SCU.
The Q/R SCP AE returns C-MOVE response status as specified below.
Table 4.2-35
THE Q/R SCP AE C-MOVE RESPONSE STATUS RETURN BEHAVIOR

Service Status
Further Meaning Behavior
Status Code
Success Sub-operations 0000 All the Composite SOP Instances have been
complete – No Failures successfully sent to the C-MOVE Destination AE.
Refused Out of Resources – A701 Number of matches cannot be determined due to
Unable to calculate system failure. Returned if the server’s database is
number of matches not functioning so the search for matches to the
C-MOVE Request cannot be found.
Error message is output as an alert on the User
Interface, and to the Service Log.
Out of Resources – A702 C-STORE sub-operations cannot be performed due
Unable to perform to failure to access Composite SOP Instances in
sub-operations archive, or failure of a C-STORE Request.
Error message is output as an alert on the User
Interface, and to the Service Log.
Move destination A801 The Destination Application Entity named in the
unknown C-MOVE Request is unknown to Q/R SCP AE.
Error message is output to the Service Log.
Failed Identifier does not A900 The C-MOVE identifier contains invalid Elements or
match SOP Class values, or is missing mandatory Elements or values
for the specified SOP Class or retrieval level.
Error message is output to the Service Log.
Cancel Matching terminated FE00 The C-MOVE SCU sent a Cancel Request. This has
due to Cancel Request been acknowledged and the export of Composite
SOP Instances to the C-MOVE Destination AE has
been halted.

29
 No. MIICT0057EA

4.2.4 MWM SCU AE Specification

4.2.4.1 SOP Classes

The MWM SCU AE provides Standard Conformance to the following SOP Classes:
Table 4.2-36
SOP CLASSES FOR THE MWM SCU AE

SOP Class Name SOP Class UID SCU SCP

Modality Worklist Information Model – FIND 1.2.840.10008.5.1.4.31 Yes No

4.2.4.2 Association Policies

4.2.4.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-37
DICOM APPLICATION CONTEXT FOR THE MWM SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.4.2.2 Number of Associations

The MWM SCU AE initiates one Association at a time for a Worklist request.
Table 4.2-38
NUMBER OF ASSOCIATIONS INITIATED FOR THE MWM SCU AE

Maximum number of simultaneous Associations 1

4.2.4.2.3 Asynchronous Nature

The MWM SCU AE does not support asynchronous communication (multiple outstanding transactions over a
single Association).
Table 4.2-39
ASYNCHRONOUS NATURE FOR THE MWM SCU AE

Maximum number of outstanding asynchronous transactions 1

4.2.4.2.4 Implementation Identifying Information

The implementation information for this Application Entity is:
Table 4.2-40
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE MWM SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

30
 No. MIICT0057EA

4.2.4.3 Association Initiation Policy

4.2.4.3.1 Activity – Update Worklist

4.2.4.3.1.1 Description and Sequencing of Activities

The request for a “Update Worklist” is initiated by user interaction, i.e. pressing the buttons “Worklist Reload”
or automatically at the time of key-word change.
Upon initiation of the request, the MWM SCU AE will build an Identifier for the C-FIND request, will initiate an
Association to send the request and will wait for Worklist responses. After retrieval of all responses, the
MWM SCU AE will access the local database to add or update patient demographic data. The results will be
displayed in a separate list.
The MWM SCU AE will initiate an Association in order to issue a C-FIND request according to the Modality
Worklist Information Model.
MWM Department
SCU Scheduler

1. Open Association

2. C-FIND Request (Worklist Query)

3. C-FIND Response (Worklist Item) – Status = Pending

4. C-FIND Response (Worklist Item) – Status = Pending

5. C-FIND Response – Status = Success

6. Close Association

7. Select Worklist Item

Figure 4.2-5
SEQUENCING OF ACTIVITY – UPDATE WORKLIST

31
 No. MIICT0057EA

A possible sequence of interactions between the MWM SCU AE and a Department Scheduler (e.g. a device
such as a RIS or HIS which supports the Modality Worklist SOP Class as an SCP) is illustrated in the Figure
above:

1. The MWM SCU AE opens an association with the Department Scheduler

2. The MWM SCU AE sends a C-FIND request to the Department Scheduler containing the Worklist
Query attributes.

3. The Department Scheduler returns a C-FIND response containing the requested attributes of the first
matching Worklist Item.

4. The Department Scheduler returns another C-FIND response containing the requested attributes of
the second matching Worklist Item.

5. The Department Scheduler returns another C-FIND response with status Success indicating that no
further matching Worklist Items exist. This example assumes that only 2 Worklist items match the
Worklist Query.

6. The MWM SCU AE closes the association with the Department Scheduler.

7. The user selects a Worklist Item from the Worklist and prepares to acquire new images.

4.2.4.3.1.2 Proposed Presentation Contexts

The MWM SCU AE will propose Presentation Contexts as shown in the following table:
Table 4.2-41
Proposed Presentation Contexts for Activity Update Worklist

Presentation Context Table

Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List
Modality Worklist
1.2.840.10008.5.1.
Information Model – Implicit VR Little Endian 1.2.840.10008.1.2 SCU None
4.31
FIND

32
 No. MIICT0057EA

4.2.4.3.1.3 SOP Specific Conformance for Modality Worklist SOP Class

The MWM SCU AE provides standard conformance to the Modality Worklist SOP Class as an SCU.
The behavior of the MWM SCU when encountering status codes in a Modality Worklist C-FIND response is
summarized in the Table below.
Table 4.2-42
Modality Worklist C-FIND Response Status Handling Behavior

Service Status
Further Meaning Behavior
Status Code
Success Matching is complete 0000 The SCP has completed the matches. Worklist items are
available for display or further processing.
Refused Out of Resources A700 The Association is aborted using A-ABORT and the
worklist query is marked as failed. The status meaning
is logged and reported to the user if an interactive query.
Any additional error information in the Response will be
logged.
Failed Identifier does not match A900 The Association is aborted using A-ABORT and the
SOP Class worklist query is marked as failed. The status meaning is
logged and reported to the user if an interactive query.
Any additional error information in the Response will be
logged.
Failed Unable to Process Cxxx The Association is aborted using A-ABORT and the
worklist query is marked as failed. The status meaning is
logged and reported to the user if an interactive query.
Any additional error information in the Response will be
logged.
Cancel Matching terminated due to FE00 If the query was cancelled due to too may worklist items
Cancel request then the SCP has completed the matches. Worklist items
are available for display or further processing. Otherwise,
the Association is aborted using A-ABORT and the
worklist query is marked as failed. The status meaning
is logged and reported to the user if an interactive query.
Pending Matches are continuing FF00 The worklist item contained in the Identifier is collected for
later display or further processing.

Pending Matches are continuing – FF01 The worklist item contained in the Identifier is collected for
Warning that one or more later display or further processing. The status meaning is
Optional Keys were not logged only once for each C-FIND operation.
supported
* * Any The Association is aborted using A-ABORT and the
other worklist is marked as failed. The status meaning is
status logged and reported to the user if an interactive query.
code. Any additional error information in the Response will be
logged.

33
 No. MIICT0057EA

The behavior of the MWM SCU AE during communication failure is summarized in the Table below.
Table 4.2-43
MODALITY WORKLIST COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the worklist query is marked
as failed. The reason is logged and reported to the user if an interactive
query.
Association aborted by the The worklist query is marked as failed. The reason is logged and reported to
SCP or network layers the user if an interactive query.

Acquired images will always use the Study Instance UID specified for the Scheduled Procedure Step (if
available). If an acquisition is unscheduled, a Study Instance UID will be generated locally.
The Table below provides a description of the MWM SCU AE Worklist Request Identifier and specifies the
attributes that are copied into the images. Unexpected attributes returned in a C-FIND response are ignored.

Table 4.2-44
WORKLIST REQUEST IDENTIFIER
Module Name Tag VR M R D IOD
Attribute Name
SOP Common
Specific Character Set (0008,0005) CS x x
Scheduled Procedure Step
Scheduled Procedure Step Sequence (0040,0100) SQ x
> Scheduled Station AE Title (0040,0001) AE x
> Scheduled Station Name (0040,0010) LO x
> Scheduled Procedure Step Location (0040,0011) SH x
> Scheduled Procedure Step Start Date (0040,0002) DA x x
> Scheduled Procedure Step Start Time (0040,0003) TM x x
> Scheduled Procedure Step End Date (0040,0004) DA x
> Scheduled Procedure Step End Time (0040,0005) TM x
> Scheduled Performing Physician’s Name (0040,0006) PN x
> Scheduled Procedure Step Description (0040,0007) SH x x
> Scheduled Protocol Code Sequence (0040,0008) SQ x x
> Scheduled Procedure Step ID (0040,0009) SH x x
> Scheduled Procedure Step Status (0040,0020) CS
> Comments on Scheduled Procedure Step (0040,0400) LT x
> Modality (0008,0060) CS S(CT) x x x
> Requested Contrast Agent (0032,1070) LO x x
> Pre-Medication (0040,0012) LO x
Requested Procedure
Requested Procedure ID (0040,1001) SH x
Reason for the Requested Procedure (0040,1002) LO x
Requested Procedure Comments (0040,1400) LT x
Requested Procedure Code Sequence (0032,1064) SQ x
Referenced Study Sequence (0008,1110) SQ x
Requested Procedure Description (0032,1060) LO x
Study Instance UID (0020,000D) UI x x x
Requested Procedure Priority (0040,1003) SH x
Patient Transport Arrangements (0040,1004) LO x
Requested Procedure Location (0040,1005) LO x
Confidentiality Code (0040,1008) LO x
Reporting Priority (0040,1009) SH x
Names of Intended Recipients of Results (0040,1010) PN x
Imaging Service Request

34
 No. MIICT0057EA

Reason for the Imaging Service Request (0040,2001) LO x

Imaging Service Request Comments (0040,2400) LT x
Requesting Physician (0032,1032) PN x
Referring Physician's Name (0008,0090) PN x x
Requesting Service (0032,1033) LO x x
Accession Number (0008,0050) SH x x x
Issue Date of Imaging Service Request (0040,2004) DA x
Issue Time of Imaging Service Request (0040,2005) TM x
Order Entered By (0040,2008) PN x
Order Enters Location (0040,2009) SH x
Order Callback Phone Number (0040,2010) SH x
Visit Relationship
Referenced Patient Sequence (0008,1120) SQ x
Visit Identification
Institution Name (0008,0080) LO x
Institution Address (0008,0081) ST x
Institution Code Sequence (0008,0082) SQ x
Admission ID (0038,0010) LO x
Issuer of Admission ID (0038,0011) LO x
Visit Status
Visit Status ID (0038,0008) CS
Current Patient Location (0038,0300) LO
Patient’s Institution Residence (0038,0400) LO
Visit Comments (0038,4000) LT
Visit Admission
Referring Physician’s Address (0008,0092) ST x
Referring Physician’s Telephone Number (0008,0094) SH x
Admitting Diagnosis Description (0008,1080) LO x
Admitting Diagnosis Code Sequence (0008,1084) SQ x
Route of Admissions (0038,0016) LO x
Admitting Date (0038,0020) DA x
Admitting Time (0038,0021) TM x
Patient Relationship
Referenced Visit Sequence (0008,1125) SQ x
Referenced Patient Alias Sequence (0038,0004) SQ x
Patient Identification
Patient’s Name (0010,0010) PN x x x
Patient ID (0010,0020) LO x x x
Issuer of Patient ID (0010,0021) LO x
Other Patient IDs (0010,1000) LO x x
Other Patient Names (0010,1001) PN x x
Patient’s Birth Name (0010,1005) PN x x
Patient’s Mother’s Birth Name (0010,1060) PN x x
Medical Record Locator (0010,1090) LO x
Patient Demographic

35
 No. MIICT0057EA

Patient’s Age (0010,1010) AS x x

Occupation (0010,2180) SH x
Patient Data Confidentiality Constraint Description (0040,3001) LO x
Patient’s Birth Date (0010,0030) DA x x
Patient’s Birth Time (0010,0032) TM x
Patient’s Sex (0010,0040) CS x x
Patient’s Insurance Plan Code Sequence (0010,0050) SQ x
Patient’s Size (0010,1020) DS x x
Patient’s Weight (0010,1030) DS x x
Patient’s Address (0010,1040) LO x x
Military Rank (0010,1080) LO x
Branch of Service (0010,1081) LO x
Country Residence (0010,2150) LO x
Region of Residence (0010,2152) LO x
Patient’s Telephone Number (0010,2154) SH x
Ethnic Group (0010,2160) SH x
Patient’s Religious Reference (0010,21F0) LO x
Patient Comment (0010,4000) LT x x
Patient Medical
Medical Alerts (0010,2000) LO x
Contrast Allergies (0010,2110) LO x x
Smoking Status (0010,21A0) CS x x
Additional Patient History (0010,21B0) LT x
Pregnancy Status (0010,21C0) US x x
Last Menstrual Date (0010,21D0) DA x
Special Needs (0038,0050) LO x
Patient State (0038,0500) LO x

The above table should be read as follows:

Module Name: The name of the associated module for supported worklist attributes.
Attribute Name: Attributes supported to build the MWM SCU AE Worklist Request Identifier.
Tag: DICOM tag for this attribute.
VR: DICOM VR for this attribute.
M: Matching keys for (automatic) Worklist Update. An "S" will indicate that the MWM
SCU AE will supply an attribute value for Single Value Matching. This setting can be
configured using the user tool. The system’s default setting is described in the above table.
R: Return keys. An "x" will indicate that the MWM SCU AE will supply this attribute as
Return Key with zero length for Universal Matching. This setting can be configured using
the service tool. The system’s default setting is described in the above table.
D: Displayed keys. An “x” indicates that this worklist attribute is displayed to the user
during a patient registration dialog. For example, Patient Name will be displayed
when registering the patient prior to an examination. This setting can be configured
using the service tool. The system’s default setting is described in the above table.
IOD: An "x" indicates that this Worklist attribute is included into all Object Instances
created during performance of the related Procedure Step. This setting can be
configured using the service tool. The system’s default setting is described in the above
table.

4.2.4.4 Association Acceptance Policy

The MWM SCU AE does not accept Associations.

36
 No. MIICT0057EA

4.2.5 MPPS SCU AE Specification

4.2.5.1 SOP Classes

The MPPS SCU AE provides Standard Conformance to the following SOP Classes:
Table 4.2-45
SOP CLASSES FOR THE MPPS SCU AE

SOP Class Name SOP Class UID SCU SCP

Modality Performed Procedure Step 1.2.840.10008.3.1.2.3.3 Yes No
Modality Performed Procedure Step Retrieve 1.2.840.10008.3.1.2.3.4 Yes No

4.2.5.2 Association Policies

4.2.5.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-46
DICOM APPLICATION CONTEXT FOR THE MPPS SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.5.2.2 Number of Associations

The MPPS SCU AE initiates one Association at a time.
Table 4.2-47
NUMBER OF ASSOCIATIONS INITIATED FOR THE MPPS SCU AE

Maximum number of simultaneous Associations 1

4.2.5.2.3 Asynchronous Nature

The MPPS SCU AE does not support asynchronous communication (multiple outstanding transactions over a
single Association).
Table 4.2-48
ASYNCHRONOUS NATURE FOR THE MPPS SCU AE

Maximum number of outstanding asynchronous transactions 1

4.2.5.2.4 Implementation Identifying Information

The implementation information for this Application Entity is:
Table 4.2-49
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE MPPS SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

37
 No. MIICT0057EA

4.2.5.3 Association Initiation Policy

4.2.5.3.1 Activity – Acquire Images

4.2.5.3.1.1 Description and Sequencing of Activities

The MPPS SCU AE performs the creation of a MPPS Instance automatically whenever images are acquired.
Further updates on the MPPS data can be performed automatically or interactively.
The MPPS SCU AE will initiate an Association to issue an:

— N-CREATE request according to the CREATE Modality Performed Procedure Step SOP Instance
operation, or an:
— N-GET request to get MPPSR information, or an:
— N-SET request to update the contents and state of the MPPS according to the SET Modality Performed
Procedure Step Information operation.

MPPS SCU Department

AE Scheduler

1. Open Association

2. N-CREATE Request (MPPS) – IN PROGRESS

3. Close Association

4. Acquire Images

5. Open Association

6. N-GET Request (MPPSR)

7. Close Association

8. Open Association

9. N-SET Request (MPPS) – COMPLETED

10. Close Association

Figure 4.2-6
SEQUENCING OF ACTIVITY – ACQUIRE IMAGES

A possible sequence of interactions between the MPPS SCU AE and a Department Scheduler (e.g. a device
such as a RIS or HIS which supports the MPPS SOP Class and MPPSR SCP Class as an SCP) is illustrated
in the Figure above:

1. The MPPS SCU AE opens an association with the Department Scheduler

2. The MPPS SCU AE sends an N-CREATE request to the Department Scheduler to create an MPPS
instance with status of “IN PROGRESS” and create all necessary attributes. The Department
Scheduler acknowledges the MPPS creation with an N-CREATE response (status success).

3. The MPPS SCU AE closes the association with the Department Scheduler.

38
 No. MIICT0057EA

4. All images are acquired and stored in the local database. (Figure 4.2-6)

5. The MPPS SCU AE opens an association with the Department Scheduler.

6. The MPPS SCU AE sends an N-GET request to the Department Scheduler to get MPPSR
information.

7. The MPPS SCU AE closes the association with the Department Scheduler.

8. The MPPS SCU AE opens an association with the Department Scheduler.

9. The MPPS SCU AE sends an N-SET request to the Department Scheduler to update the MPPS
instance with status of “COMPLETED” and set all necessary attributes. The Department Scheduler
acknowledges the MPPS update with an N-SET response (status success).

10. The MPPS SCU AE closes the association with the Department Scheduler.

4.2.5.3.1.2 Proposed Presentation Contexts

The MPPS SCU AE will propose Presentation Contexts as shown in the following Table:

Table 4.2-50
PROPOSED PRESENTATION CONTEXTS FOR REAL-WORLD ACTIVITY ACQUIRE IMAGES
Presentation Context Table
Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List

Modality Performed 1.2.840.10008.3.1. Implicit VR Little Endian 1.2.840.10008.1.2

SCU None
Procedure Step 2.3.3 Explicit VR Big Endian 1.2.840.10008.1.2.2
Modality Performed Implicit VR Little Endian 1.2.840.10008.1.2
1.2.840.10008.3.1.
Procedure Step SCU None
2.3.4 Explicit VR Big Endian 1.2.840.10008.1.2.2
Retrieve

39
 No. MIICT0057EA

4.2.5.3.1.3 SOP Specific Conformance for MPPS SOP Class

The MPPS SCU AE provides standard conformance to the Modality Performed Procedure Step SOP Class
as an SCU.
The behavior of the MPPS SCU AE when encountering status codes in an MPPS N-CREATE or N–SET
response is summarized in the Table below.
Table 4.2-51
MPPS N-CREATE / N-SET RESPONSE STATUS HANDLING BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has completed the operation successfully.
Failure Processing Failure – 0110H The Association is aborted using A-ABORT and the
Performed Procedure MPPS is marked as failed. The status meaning is
Step Object may no logged and reported to the user. Additional information
longer be updated in the Response will be logged (i.e. Error Comment and
Error ID).
Warning Attribute Value Out of 0116H The MPPS operation is considered successful if it is
Range configured that the status would be considered
successful.
* * Any other The Association is aborted using A-ABORT and the
status MPPS is marked as failed. The status meaning is
code. logged and reported to the user.

The behavior of the MPPS SCU AE during communication failure is summarized in the Table below:
Table 4.2-52
MPPS COMMUNICATION FAILURE BEHAVIOR
Exception Behavior
Timeout The Association is aborted using A-ABORT and MPPS is marked as
failed. The reason is logged and reported to the user.
Association aborted by the SCP The MPPS is marked as failed. The reason is logged and reported to
or network layers the user.

40
 No. MIICT0057EA

The Table below provides a description of the MPPS N-CREATE and N-SET request identifiers sent by the
MPPS SCU AE. Empty cells in the N-CREATE and N-SET columns indicate that the attribute is not sent. An
“x” indicates that an appropriate value will be sent. A “Zero length” attribute will be sent with zero length.
Table 4.2-53
MPPS N-CREATE / N-SET REQUEST IDENTIFIER
Attribute Name Tag VR N-CREATE N-SET
Created, if an extended
or replacement character
Specific Character Set (0008,0005) CS set is used. Refer to
6.SUPPORT OF
CHARACTER SETS
Performed Procedure Step Relationship
Scheduled Step Attributes
(0040,0270) SQ Always Set
Sequence
> Study Instance UID (0020,000D) UI From Modality Worklist
> Referenced Study Sequence (0008,1110) SQ From Modality Worklist
>> Referenced SOP Class UID (0008,1150) UI From Modality Worklist
>> Referenced SOP Instance UID (0008,1155) UI From Modality Worklist
> Accession Number (0008,0050) SH From Modality Worklist
> Placer Order Number/Imaging
(0040,2016) LO From Modality Worklist
Service Request
> Filler Order Number/Imaging
(0040,2017) LO From Modality Worklist
Service Request
> Requested Procedure ID (0040,1001) SH From Modality Worklist
> Requested Procedure
(0032,1060) LO From Modality Worklist
Description
> Scheduled Procedure Step ID (0040,0009) SH From Modality Worklist
> Scheduled Procedure Step
(0040,0007) LO From Modality Worklist
Description
> Scheduled Protocol Code
(0040,0008) SQ From Modality Worklist
Sequence
From Modality Worklist
Patient’s Name (0010,0010) PN
or user input
From Modality Worklist
Patient ID (0010,0020) LO
or user input.
From Modality Worklist
Patient’s Birth Date (0010,0030) DA
or user input.
From Modality Worklist
Patient’s Sex (0010,0040) CS
or user input.
Referenced Patient Sequence (0008,1120) SQ From Modality Worklist.
Performed Procedure Step Information
Performed Procedure Step ID (0040,0253) SH Automatically created.
Performed Station AE Title (0040,0241) AE MPPS AE Title
Performed Station Name (0040,0242) SH From configuration
Performed Location (0040,0243) SH From configuration
Performed Procedure Step Start
(0040,0244) DA Actual start date
Date
Performed Procedure Step Start
(0040,0245) TM Actual start time
Time

41
 No. MIICT0057EA

COMPLETED or
Performed Procedure Step Status (0040,0252) CS IN PROGRESS
DISCONTINUED
Performed Procedure Step From Modality Worklist.
(0040,0254) LO
Description
Performed Procedure Type From Modality Worklist.
(0040,0255) LO
Description
Procedure Code Sequence (0008,1032) SQ Zero or more items Zero or more items
Performed Procedure Step End
(0040,0250) DA Zero length Actual end date
Date
Performed Procedure Step End
(0040,0251) TM Zero length Actual end time
Time
Image Acquisition Results
Modality (0008,0060) CS CT
From Modality Worklist
Study ID (0020,0010) SH
or automatically created.
Performed Protocol Code
(0040,0260) SQ Zero or more items Zero or more items
Sequence
Performed Series Sequence (0040,0340) SQ Zero length One or more items
> Performing Physician’s Name (0008,1050) PN x
> Protocol Name (0018,1030) LO x
> Operator’s Name (0008,1070) PN x
> Series Instance UID (0020,000E) UI x
> Series Description (0008,103E) LO x
> Retrieve AE Title (0008,0054) AE x
> Referenced Image Sequence (0008,1140) SQ One or more items
>> Referenced SOP Class UID (0008,1150) UI x
>> Referenced SOP Instance UID (0008,1155) UI x
> Referenced Non-Image
Composite SOP Instance (0040,0220) SQ x
Sequence
>> Referenced SOP Class UID (0008,1150) UI x
>> Referenced SOP Instance UID (0008,1155) UI x
Billing and Material Code
Film Consumption Sequence (0040,0321) SQ Zero or more items
>Number of Films (2100,0170) IS x
>Medium Type (2000,0030) CS x
>Film Size ID (2010,0050) CS x
Billing Supplies and Devices (0040,0324)
SQ Zero or more items
Sequence
>Quantity Sequence (0040,0293) SQ x
>>Quantity (0040,0294) DS x
>>Measuring Units Sequence (0040,0295) SQ x

42
 No. MIICT0057EA

4.2.5.3.1.4 SOP Specific Conformance for MPPSR SOP Class

The MPPS SCU AE provides standard conformance to the Modality Performed Procedure Step Retrieve
SOP Class as an SCU.
The behavior of the MPPS SCU AE when encountering status codes in an MPPSR N-GET response is
summarized in the Table below.
Table 4.2-54
MPPSR N-GET RESPONSE STATUS HANDLING BEHAVIOR
Service Further
Status Code Behavior
Status Meaning
Success Success 0000 The SCP has completed the operation successfully.
* * Any other The Association is aborted using A-ABORT and the MPPSR is
status code. marked as failed. The status meaning is logged.

The behavior of the MPPS SCU AE during communication failure is summarized in the Table below:
Table 4.2-55
MPPSR COMMUNICATION FAILURE BEHAVIOR
Exception Behavior
Timeout The Association is aborted using A-ABORT and MPPSR is marked as
failed. The reason is logged and reported to the user.
Association aborted by the SCP The MPPSR is marked as failed. The reason is logged.
or network layers

The Table below provides a description of the MPPSR N-GET request identifiers sent by the MPPS SCU AE.
Table 4.2-56
MPPSR SOP CLASS N-GET REQUEST ATTRIBUTES
Attribute Name Tag VR Value
Performed Procedure Step Information
Performed Procedure The Value sent by the MPPS SCU AE
(0040,0254) LO
Step Description in the MPPS N-CREATE.
Performed Procedure The Value sent by the MPPS SCU
(0040,0255) LO
Type Description AE in the MPPS N-CREATE.

4.2.5.4 Association Acceptance Policy

The MPPS SCU AE does not accept Associations.

43
 No. MIICT0057EA

4.2.6 Q/R SCU AE Specification

4.2.6.1 SOP Classes

The Q/R SCU AE provides Standard Conformance to the following SOP Classes:
Table 4.2-57
SOP CLASSES FOR THE Q/R SCU AE

SOP Class Name SOP Class UID SCU SCP

Study Root Q/R Information Model – Find 1.2.840.10008.5.1.4.1.2.2.1 Yes No
Study Root Q/R Information Model – Move 1.2.840.10008.5.1.4.1.2.2.2 Yes No

4.2.6.2 Association Policies

4.2.6.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-58
DICOM APPLICATION CONTEXT FOR THE Q/R SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.6.2.2 Number of Associations

The Q/R SCU AE can initiate up to three Associations at a time.
Table 4.2-59
NUMBER OF ASSOCIATIONS INITIATED FOR THE Q/R SCU AE

Maximum number of simultaneous Associations 3

4.2.6.2.3 Asynchronous Nature

The Q/R SCU AE does not support asynchronous communication (multiple outstanding transactions over a
single Association).
Table 4.2-60
ASYNCHRONOUS NATURE FOR THE Q/R SCU AE

Maximum number of outstanding asynchronous transactions 1

4.2.6.2.4 Implementation Identifying Information

The implementation information for this Application Entity is:
Table 4.2-61
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE Q/R SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

44
 No. MIICT0057EA

4.2.6.3 Association Initiation Policy

4.2.6.3.1 Activity – Query and Retrieve Images

4.2.6.3.1.1 Description and Sequencing of Activities

The Q/R SCU AE is activated when the user selects a remote node to query and enters some key
information, Patient’s Name, Patient ID and/or Study Date. The user can select studies, series and images to
be retrieved. The images will be received at the Storage SCP AE.
Storage SCP Q/R SCU Q/R SCP Storage SCU
AE AE AE AE

1. Open Association

2 Query for Patient, Study, Series, or Image Information

3. Return Patient, Study, Series, or Image Information

4. Close Association

5. Open Association

Repeat …

6. Request Retrieval of an Image, Series or Study. Notification of

the Image to be
sent to C-MOVE
Destination AE
in Response

7.Open Association

Repeat …

8. Image Sent to C-MOVE Destination

Notification of
success or failure
for the Image
9. C-MOVE-RSP sent for the Image Sent

10. Close Association

11. Close Association

Figure 4.2-7
SEQUENCING OF ACTIVITY – QUERY AND RETRIEVE IMAGES

45
 No. MIICT0057EA

The following sequencing constraints illustrated in the Figure above:

1. The Q/R SCU AE opens an Association with the Q/R SCP AE.

2. The Q/R SCU AE sends a C-FIND-RQ Message

3. The Q/R SCP AE returns a C-FIND-RSP Message to the Q/R SCU AE with matching information. A
C-FIND-RSP is sent for each entity matching the identifier specified in the C-FIND-RQ. A final
C-FIND-RSP is sent indicating that the matching is complete.

4. The Q/R SCU AE closes the Association.

5. The Q/R SCU AE opens an Association with the Q/R SCP AE.

6. The Q/R SCU AE sends a C-MOVE-RQ Message. The Q/R SCP AE notifies the Storage SCU AE to
send the Composite SOP Instances to the peer C-MOVE Destination AE as indicated in the
C-MOVE-RQ.

7. The Storage SCU AE opens an Association with the C-MOVE Destination AE.

8. The Storage SCU AE sends images to the C-MOVE Destination AE. The Storage SCU AE indicates
to the Q/R SCP AE whether the transfer succeeded or failed.

9. The Q/R SCP AE then returns a C-MOVE-RSP indicating this success or failure.

10. The Storage SCU AE closes the Association.

11. The Q/R SCU AE closes the Association.

4.2.6.3.1.2 Proposed Presentation Contexts

The Q/R SCU AE will propose Presentation Contexts as shown in the following Table:
Table 4.2-62
PROPOSED PRESENTATION CONTEXTS FOR REAL-WORLD ACTIVITY
QUERY AND RETRIEVE IMAGES
Presentation Context Table
Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List
Study Root Q/R 1.2.840.10008.5.1. Implicit VR Little Endian 1.2.840.10008.1.2
Information Model – 4.1.2.2.1
Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
Find
Explicit VR Big Endian 1.2.840.10008.1.2.2
Study Root Q/R 1.2.840.10008.5.1. Implicit VR Little Endian 1.2.840.10008.1.2
Information Model – 4.1.2.2.2 Explicit VR Little Endian 1.2.840.10008.1.2.1 SCU None
Move
Explicit VR Big Endian 1.2.840.10008.1.2.2

46
 No. MIICT0057EA

4.2.6.3.1.3 SOP Specific Conformance for Q/R Find SOP Classes

The Q/R SCU AE provides standard conformance to the Query/Retrieve Find SOP Classes as an SCU.
The behavior of the Q/R SCU AE when encountering status codes in a Q/R C-FIND response is summarized
in the Table below:
Table 4.2-63
THE Q/R SCU AE C-FIND RESPONSE STATUS BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Matching is complete 0000 The SCP has completed the matches. Study, Series or
Image information items are available for display or
further processing.
Refused Out of Resources A700 The Association is aborted using A-ABORT and the
Study, Series, or Image information query is marked as
failed. The status meaning is logged and reported to the
user if an interactive query. Any additional error
information in the Response will be logged.
Failed Identifier does not match A900 The Association is aborted using A-ABORT and the
SOP Class Study, Series, or Image information query is marked as
failed. The status meaning is logged and reported to the
user if an interactive query. Any additional error
information in the Response will be logged.
Failed Unable to Process Cxxx The Association is aborted using A-ABORT and the
Study, Series, or Image information query is marked as
failed. The status meaning is logged and reported to the
user if an interactive query. Any additional error
information in the Response will be logged.
Cancel Matching terminated due to FE00 The Association is aborted using A-ABORT and the
Cancel request Study, Series, or Image information query is marked as
failed. The status meaning is logged and reported to the
user if an interactive query.
Pending Matches are continuing FF00 The Study, Series, or Image information items contained
in the Identifier is collected for later display or further
processing.
Pending Matches are continuing – FF01 The Study, Series, or Image information items contained
Warning that one or more in the Identifier is collected for later display or further
Optional Keys were not processing.
supported
* * Any The Association is aborted using A-ABORT and the
other Study, Series, or Image information is marked as failed.
status The status meaning is logged and reported to the user if
code. an interactive query. Any additional error information in
the Response will be logged.

47
 No. MIICT0057EA

The behavior of the Q/R SCU AE during communication failure is summarized in the Table below.
Table 4.2-64
Q/R FIND COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the study, series or image
query is marked as failed. The reason is logged and reported to the user if an
interactive query.
Association aborted by the The study, series or image query is marked as failed. The reason is logged
SCP or network layers and reported to the user if an interactive query.

All queries are initiated at the highest level of the information model (the STUDY level), and then for each
response received, recursively repeated at the next lower levels (the SERIES and then IMAGE levels), in
order to completely elucidate the “tree” of instances available on the remote AE.

48
 No. MIICT0057EA

The Table below provides a description of the Q/R SCU AE C-FIND Request Identifier.
Table 4.2-65
STUDY ROOT REQUEST IDENTIFIER FOR C-FIND
Types of
Name Tag
Matching
Study Level
Study Date (0008,0020) S,*,U,R
Study Time (0008,0030) S,*,U,R
Accession Number (0008,0050) S,*,U
Study Description (0008,1030) S,*,U
Patient’s Name (0010,0010) S,*,U
Patient’s ID (0010,0020) S,*,U
Patient's Sex (0010,0040) S,*,U
Patient's Age (0010,1010) S,*,U
Study Instance UID (0020,000D) UNIQUE
Study ID (0020,0010) S,*,U
Number of Study Related Series (0020,1206) U
Number of Study Related Instances (0020,1208) U
Series Level
Modality (0008,0060) S,*,U
Series Instance UID (0020,000E) UNIQUE
Series Number (0020,0011) S,*,U
Instance Level
SOP Instance UID (0008,0018) UNIQUE
Acquisition Date (0008,0022) S,*,U,R
Contrast/Bolus Agent (0018,0010) U
Scanning Sequence (0018,0020) U
Slice Thickness (0018,0050) U
KVP (0018,0060) U
Repetition Time (0018,0080) U
Echo Time (0018,0081) U
Inversion Time (0018,0082) U
Echo Number(s) (0018,0086) U
Gantry/Detector Tilt (0018,1120) U
X-ray Tube Current (0018,1151) U
Convolution Kernel (0018,1210) U
Acquisition Number (0020,0012) U
Instance Number (0020,0013) U
Rows (0028,0010) U
Columns (0028,0011) U

Types of Matching:
The types of Matching supported by the Q/R SCU AE. An "S" indicates the identifier attribute uses Single
Value Matching, an “R” indicates Range Matching, an “*” indicates wildcard matching, and a ‘U’ indicates
Universal Matching. “UNIQUE” indicates that this is the Unique Key for that query level, in which case
Universal Matching or Single Value Matching is used depending on the query level.

49
 No. MIICT0057EA

4.2.6.3.1.4 SOP Specific Conformance for Q/R Move SOP Classes

The Q/R SCU AE provides standard conformance to the Query/Retrieve Move SOP Classes as an SCU.
The behavior of the Q/R SCU AE when encountering status codes in a Q/R C-MOVE response is
summarized in the Table below:
Table 4.2-66
THE Q/R SCU AE C-MOVE RESPONSE STATUS BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Sub-operations 0000 The Storage SCP AE has successfully received the
complete – No Failures SOP Instance. If all SOP Instances in a move job
have status success then the job is marked as
complete.
Refused Out of Resources – A701 The Association is aborted using A-ABORT and the
Unable to calculate move job is marked as failed. The status meaning is
number of matches logged and the job failure is reported to the user via
the job control application. This is a transient failure.
Out of Resources – A702 The Association is aborted using A-ABORT and the
Unable to perform move job is marked as failed. The status meaning is
sub-operations logged and the job failure is reported to the user via
the job control application.
Move destination A801 The Association is aborted using A-ABORT and the
unknown move job is marked as failed. The status meaning is
logged and the job failure is reported to the user via
the job control application.
Failed Identifier does not A900 The Association is aborted using A-ABORT and the
match SOP Class move job is marked as failed. The status meaning is
logged and the job failure is reported to the user via
the job control application.
Warning Sub-operations B000 The Association is aborted using A-ABORT and the
complete but one or move job is marked as failed. The status meaning is
more failures. logged and the job failure is reported to the user via
the job control application.

The behavior of the Q/R SCU AE during communication failure is summarized in the Table below.
Table 4.2-67
Q/R MOVE COMMUNICATION FAILURE BEHAVIOR

Exception Behavior
Timeout The Association is aborted using A-ABORT and the retrieve is marked as
failed. The reason is logged and reported to the user if an interactive query.
Association aborted by the The retrieve is marked as failed. The reason is logged and reported to the
SCP or network layers user if an interactive query.

The system requests Image Level Move only.

4.2.6.4 Association Acceptance Policy

The Q/R SCU AE does not accept Associations.

50
 No. MIICT0057EA

4.2.7 Storage SCP AE Specification

4.2.7.1 SOP Classes

The Storage SCP AE provides Standard Conformance to the following SOP Classes:
Table 4.2-68
SOP CLASSES FOR THE STORAGE SCU AE
SOP Class Name SOP Class UID SCU SCP
Verification 1.2.840.10008.1.1 No Yes
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 No Yes
Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 No Yes
Standalone Curve Storage 1.2.840.10008.5.1.4.1.1.9 No Yes
Enhanced CT Image Storage 1.2.840.10008.5.1.4.1.1.2.1 No Yes
Grayscale Softcopy Presentation State 1.2.840.10008.5.1.4.1.1.11.1 No Yes
Storage
Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 No Yes
X-Ray Radiation Dose SR Storage 1.2.840.10008.5.1.4.1.1.88.67 No Yes
Segmentation Storage 1.2.840.10008.5.1.4.1.1.66.4 No Yes

4.2.7.2 Association Policies

4.2.7.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-69
DICOM APPLICATION CONTEXT FOR THE STORAGE SCP AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.7.2.2 Number of Associations

The Storage SCP AE can support up to three Associations at a time.
Table 4.2-70
NUMBER OF ASSOCIATIONS ACCEPTED FOR THE STORAGE SCP AE

Maximum number of simultaneous Associations 3

4.2.7.2.3 Asynchronous Nature

The Storage SCP AE does not support asynchronous communication (multiple outstanding transactions over
a single Association).
Table 4.2-71
ASYNCHRONOUS NATURE FOR THE STORAGE SCP AE

Maximum number of outstanding asynchronous transactions 1

51
 No. MIICT0057EA

4.2.7.2.4 Implementation Identifying Information

The implementation information for the Storage SCP AE is:
Table 4.2-72
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE STORAGE SCP AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

4.2.7.3 Association Initiation Policy

The Storage SCP AE does not initiate Associations.

4.2.7.4 Association Acceptance Policy

The Storage SCP AE accepts Associations only if they have valid Presentation Contexts. If none of the
requested Presentation Contexts are accepted then the Association Request itself is rejected. It can be
configured to only accept Associations with certain hosts (using TCP/IP address) and/or Application Entity
Titles.
Storage SCP Storage SCU
AE AE

1. Open Association

2. C-STORE Request (Storage)

3. Close Association

Figure 4.2-8
SEQUENCING OF ACTIVITY – STORE IMAGES TO THE LOCAL FILE SYSTEM

A possible sequence of interactions between the Storage SCP AE and a Storage SCU AE is illustrated in the
Figure above:

1. The Storage SCU AE opens an Association with the Storage SCP AE.

2. The Storage SCU AE sends images to the Storage SCP AE using a Storage request (C-STORE) and
the Storage SCP AE replies with a C-STORE response (status success).

3. The Storage SCU AE closes the Association with the Storage SCP AE.

The Storage SCP AE may reject Association attempts as shown in the Table below. The Result, Source and
Reason/Diag columns represent the values returned in the corresponding fields of an ASSOCIATE-RJ PDU
(see PS 3.8, Section 9.3.4). The following abbreviations are used in the Source column:

1 – DICOM UL service-user

2 – DICOM UL service-provider (ASCE related function)

3 – DICOM UL service-provider (Presentation related function)

52
 No. MIICT0057EA

Table 4.2-73
ASSOCIATION REJECTION REASONS

Result Source Reason/Diag Explanation

2– c 2 – local-limit-exceeded The (configurable) maximum
rejected-transient number of simultaneous
Associations has been reached.
An Association request with the
same parameters may succeed
at a later time.
2– c 1 – temporary-congestion No Associations can be accepted
rejected-transient at this time due to the real-time
requirements of higher priority
activities (e.g. during image
acquisition no Associations will be
accepted) or because insufficient
resources are available (e.g.
memory, processes, threads).
An Association request with the
same parameters may succeed
at a later time.
1– a 2– The Association request
rejected-permanent application-context-name-not-supported contained an unsupported
Application Context Name. An
association request with the same
parameters will not succeed at a
later time.
1– a 7 – called-AE-title-not-recognized The Association request
rejected-permanent contained an unrecognized Called
AE Title. An Association request
with the same parameters will not
succeed at a later time unless
configuration changes are made.
This rejection reason normally
occurs when the Association
initiator is incorrectly configured
and attempts to address the
Association acceptor using the
wrong AE Title.
1– a 3 – calling-AE-title-not-recognized The Association request
rejected-permanent contained an unrecognized
Calling AE Title. An Association
request with the same
parameters will not succeed at a
later time unless configuration
changes are made. This rejection
reason normally occurs when the
Association acceptor has not
been configured to recognize the
AE Title of the Association
initiator.
1– b 1 – no-reason-given The Association request could not
rejected-permanent be parsed. An Association
request with the same format will
not succeed at a later time.

53
 No. MIICT0057EA

4.2.7.4.1.1 Accepted Presentation Contexts

The default Behavior of the Storage SCP AE supports the Implicit VR Little Endian and Explicit VR Big Endian
Transfer Syntaxes.
If the both Transfer Syntaxes are proposed per Presentation Context then the Storage SCP AE will select
Explicit VR Big Endian Transfer Syntax.
Any of the Presentation Contexts shown in the following table are acceptable to the Storage SCP AE.
Table 4.2-74
ACCEPTED PRESENTATION CONTEXTS BY THE STORAGE SCP AE
Presentation Context Table
Abstract Syntax Transfer Syntax Role Ext.
Name UID Name UID Neg.

Verification 1.2.840.10008.1.1 Implicit VR Little Endian 1.2.840.10008.1.2 SCP None

Implicit VR Little Endian 1.2.840.10008.1.2
Segmentation Storage 1.2.840.10008.5.1.4.1
.1.66.4
1.2.840.10008.5.1. Explicit VR Big Endian 1.2.840.10008.1.2.2
CT Image Storage SCP None
4.1.1.2
JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.7
der Prediction (Process 0
14 [Selection Value 1])
Implicit VR Little Endian 1.2.840.10008.1.2
Segmentation Storage 1.2.840.10008.5.1.4.1
.1.66.4
Secondary Capture 1.2.840.10008.5.1. Explicit VR Big Endian 1.2.840.10008.1.2.2 SCP None
Image Storage 4.1.1.7
JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.7
der Prediction (Process 0
14 [Selection Value 1])
Implicit VR Little Endian 1.2.840.10008.1.2
Standalone Curve 1.2.840.10008.5.1. Segmentation Storage 1.2.840.10008.5.1.4.1
SCP None
Storage 4.1.1.9 .1.66.4
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Segmentation Storage 1.2.840.10008.5.1.4.1
.1.66.4
Enhanced CT 1.2.840.10008.5.1.
Explicit VR Big Endian 1.2.840.10008.1.2.2 SCP None
Image Storage 4.1.1.2.1
JPEG Lossless,
Non-Hierarchical,First-Or 1.2.840.10008.1.2.4.7
der Prediction (Process 0
14 [Selection Value 1])
Implicit VR Little Endian 1.2.840.10008.1.2
Grayscale Softcopy
1.2.840.10008.5.1. Segmentation Storage 1.2.840.10008.5.1.4.1
Presentation State SCP None
4.1.1.11.1 .1.66.4
Storage
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Enhanced SR 1.2.840.10008.5.1. Segmentation Storage 1.2.840.10008.5.1.4.1
SCP None
Storage 4.1.1.88.22 .1.66.4
Explicit VR Big Endian 1.2.840.10008.1.2.2

54
 No. MIICT0057EA

Implicit VR Little Endian 1.2.840.10008.1.2

X-Ray Radiation 1.2.840.10008.5.1. Segmentation Storage 1.2.840.10008.5.1.4.1
SCP None
Dose SR Storage 4.1.1.88.67 .1.66.4
Explicit VR Big Endian 1.2.840.10008.1.2.2
Implicit VR Little Endian 1.2.840.10008.1.2
Segmentation 1.2.840.10008.5.1. Segmentation Storage 1.2.840.10008.5.1.4.1
SCP None
Storage 4.1.1.66.4 .1.66.4
Explicit VR Big Endian 1.2.840.10008.1.2.2

4.2.7.4.1.2 SOP Specific Conformance for Verification SOP Class

The Storage SCP AE provides standard conformance to the Verification SOP Class as an SCP.

55
 No. MIICT0057EA

4.2.7.4.1.3 SOP Specific Conformance for Storage SOP Classes

The associated Activity with the Storage service is the storage of medical image data received over the
network on a designated hard disk. The Storage SCP AE will return a failure status if it is unable to store the
images on to the hard disk.
The Storage SCP AE is Level 0 conformant as a Storage SCP.

Table 4.2-75
THE STORAGE SCP AE C-STORE RESPONSE STATUS RETURN REASONS
Service Further Status
Reason
Status Meaning Code
Success Success 0000 The Composite SOP Instance was successfully received,
verified, and stored in the system database.
Refused Out of A700 Indicates that there was not enough local resources.
Resources

Error Data Set does A900 Indicates that the Data Set does not encode a valid instance
not match of the SOP Class specified.
SOP Class
Cannot C000 Indicates that the Storage SCP AE cannot parse the Data
understand Set into Elements.

56
 No. MIICT0057EA

4.2.8 Print SCU AE Specification

4.2.8.1 SOP Classes

The Print SCU AE provides Standard Conformance to the following Meta SOP Classes:
Table 4.2-76
META SOP CLASSES FOR THE PRINT SCU AE

SOP Class Name SOP Class UID SCU SCP

Basic Grayscale Print Management Meta 1.2.840.10008.5.1.1.9 Yes No
Basic Color Print Management Meta 1.2.840.10008.5.1.1.18 Yes No

The above Meta SOP Classes are defined by the following set of supported SOP Classes:
Table 4.2-77
SOP CLASSES FOR THE PRINT SCU AE

SOP Class Name SOP Class UID SCU SCP

Basic Film Session SOP Class 1.2.840.10008.5.1.1.1 Yes No

Basic film Box SOP Class 1.2.840.10008.5.1.1.2 Yes No
Basic Grayscale Image Box SOP Class 1.2.840.10008.5.1.1.4 Yes No
Basic Color Image Box SOP Class 1.2.840.10008.5.1.1.4.1 Yes No
Printer SOP Class 1.2.840.10008.5.1.1.16 Yes No

4.2.8.2 Association Policies

4.2.8.2.1 General
The DICOM standard application context name for DICOM 3.0 is always proposed:
Table 4.2-78
DICOM APPLICATION CONTEXT FOR THE PRINT SCU AE

Application Context Name 1.2.840.10008.3.1.1.1

4.2.8.2.2 Number of Associations

The Print SCU AE can initiate up to two Associations at a time.
Table 4.2-79
NUMBER OF ASSOCIATIONS ACCEPTED FOR THE PRINT SCU AE

Maximum number of simultaneous Associations 2

4.2.8.2.3 Asynchronous Nature

The Print SCU AE does not support asynchronous communication (multiple outstanding transactions over a
single Association).
Table 4.2-80
ASYNCHRONOUS NATURE FOR THE PRINT SCU AE

Maximum number of outstanding asynchronous transactions 1

57
 No. MIICT0057EA

4.2.8.2.4 Implementation Identifying Information

The implementation information for the Print SCU AE is:
Table 4.2-81
DICOM IMPLEMENTATION CLASS AND VERSION FOR THE PRINT SCU AE

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

4.2.8.3 Association Initiation Policy

4.2.8.3.1 Activity – Send Images & Print Management Information

4.2.8.3.1.1 Description and Sequencing of Activities

A user composes images onto film sheets and requests them to be sent to a specific hardcopy device. The
user can select the desired film format and number of copies.

Print SCU Printer

AE

1. Open Association

2. N-GET Request (Printer)

3. N-CREATE Request (Film Session)

4. N-CREATE Request (Film Box)

5. N-SET Request (Image Box)

6. N-ACTION Request (Film Box)

7. Print Film Sheets

8. N-EVENT-REPORT Request (Printer)

9. N-DELETE Request (Film Session)

10. Close Association

Figure 4.2-9
SEQUENCING OF ACTIVITY – SEND IMAGES & PRINT MANAGEMENT INFORMATION

58
 No. MIICT0057EA

A typical sequence of DIMSE messages sent over an association between the Print SCU AE and a Printer is
illustrated in the Figure above:

1. The Print SCU AE opens an Association with the Printer.

2. N-GET on the Printer SOP Class is used to obtain current printer status information.

3. N-CREATE on the Film Session SOP Class creates a Film Session.

4. N-CREATE on the Film Box SOP Class creates a Film Box linked to the Film Session.

5. N-SET on the Image Box SOP Class transfers the contents of the film sheet to the printer.

6. N-ACTION on the Film Box SOP Class instructs the Printer to print the Film Box.

7. The Printer prints the requested number of film sheets.

8. The Printer asynchronously reports its status via N-EVENT-REPORT notification (Printer SOP
Class). The printer can send this message at any time. The Print SCU AE does not require the
N-EVENT-REPORT to be sent. The Print SCU AE is capable of receiving an N-EVENT-REPORT
notification at any time during an association.

9. N-DELETE on the Film Session SOP Class deletes the complete Film Session SOP Instance
hierarchy.

10. The Print SCU AE closes the Association with the Printer.

4.2.8.3.1.2 Proposed Presentation Contexts

The Print SCU AE is capable of proposing the Presentation Contexts shown in the Table below:
Table 4.2-82
PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY
SEND IMAGES & PRINT MANAGEMENT INFORMATION
Presentation Context Table
Abstract Syntax Transfer Syntax Ext.
Role Neg.
Name UID Name List UID List
Basic Grayscale Implicit VR Little Endian 1.2.840.10008.1.2
1.2.840.10008.5.1.
Print Management SCU None
1.9 Explicit VR Big Endian 1.2.840.10008.1.2.2
Meta
Implicit VR Little Endian 1.2.840.10008.1.2
Basic Color Print 1.2.840.10008.5.1.
SCU None
Management Meta 1.18 Explicit VR Big Endian 1.2.840.10008.1.2.2

59
 No. MIICT0057EA

4.2.8.3.1.3 Common SOP Specific Conformance for all Print SOP Classes
The general behavior of the Print SCU AE during communication failure is summarized in the Table below.
This behavior is common for all SOP Classes supported by the Print SCU AE.
Table 4.2-83
PRINT COMMUNICATION FAILURE BEHAVIOR
Exception Behavior
Timeout The Association is aborted using A-ABORT and the
print-job is marked as failed. The reason is logged
and the job failure is reported to the user via the job
control application.
Association aborted by the SCP or network layers The print-job is marked as failed. The reason is
logged and the job failure is reported to the user via
the job control application.

4.2.8.3.1.4 SOP Specific Conformance for Printer SOP Class

The Print SCU AE supports the following DIMSE operations and notifications for the Printer SOP Class:

— N-GET
— N-EVENT-REPORT

Details of the supported attributes and status handling behavior are described in the following subsections.

4.2.8.3.1.4.1 Printer SOP Class Operations (N-GET)

The Print SCU AE uses the Printer SOP Class N-GET operation to obtain information about the current
printer status. The attributes obtained via N-GET are listed in the Table below:
Table 4.2-84
PRINTER SOP CLASS N-GET REQUEST ATTRIBUTES
Presence
Attribute Name Tag VR Value Source
of Value
Printer Status (2110,0010) CS Provided by Printer ALWAYS Printer
Printer Status Info (2110,0020) CS Provided by Printer ALWAYS Printer

The Printer Status information is evaluated as follows:

1. If Printer status (2110,0010) is NORMAL, the print-job continues to be printed.

2. If Printer status (2110,0010) is FAILURE, the print-job is marked as failed. The contents of Printer
Status Info (2110,0020) is logged and reported to the user via the job control application.

3. If Printer status (2110,0010) is WARNING, the print-job continues to be printed. The contents of
Printer Status Info (2110,0020) is logged and reported to the user via the job control application.

60
 No. MIICT0057EA

The behavior of The Print SCU AE when encountering status codes in a N-GET response is summarized in
the Table below:
Table 4.2-85
PRINTER SOP CLASS N-GET RESPONSE STATUS HANDLING BEHAVIOR
Service Further
Status Code Behavior
Status Meaning
Success Success 0000 The request to get printer status information was success.
* * Any other The Association is aborted using A-ABORT and the print-job is
status code. marked as failed. The status meaning is logged and reported to
the user.

4.2.8.3.1.4.2 Printer SOP Class Notifications (N-EVENT-REPORT)

The Print SCU AE is capable of receiving an N-EVENT-REPORT request at any time during an association.
The behavior of The Print SCU AE when receiving Event Types within the N-EVENT-REPORT is summarized
in the Table below:
Table 4.2-86
PRINTER SOP CLASS N-EVENT-REPORT BEHAVIOUR
Event Type Name Event Type ID Behavior
Normal 1 The print-job continues to be printed.
Warning 2 The print-job continues to be printed.
Failure 3 The print-job continues to be printed.
* * The print-job continues to be printed.

The reasons for returning specific status codes in a N-EVENT-REPORT response are summarized in the
Table below:
Table 4.2-87
PRINTER SOP CLASS N-EVENT-REPORT RESPONSE STATUS REASONS
Service Status Further Meaning Status Code Reasons
Success Success 0000 The notification event has been successfully received.

4.2.8.3.1.5 SOP Specific Conformance for the Film Session SOP Class
The Print SCU AE supports the following DIMSE operations for the Film Session SOP Class:

— N-CREATE
— N-DELETE

Details of the supported attributes and status handling behavior are described in the following subsections.

61
 No. MIICT0057EA

4.2.8.3.1.5.1 Film Session SOP Class Operations (N-CREATE)

The attributes supplied in an N-CREATE Request are listed in the Table below:

Table 4.2-88
FILM SESSION SOP CLASS N-CREATE REQUEST ATTRIBUTES
Presence
Attribute Name Tag VR Value Source
of Value
Number of Copies (2000,0010) IS 1 .. 99 ALWAYS User
Print Priority (2000,0020) CS MED ALWAYS Auto
Medium Type (2000,0030) CS BLUE FILM, CLEAR FILM or PAPER ALWAYS User
Film Destination (2000,0040) CS MAGAZINE or PROCESSOR ALWAYS User

The behavior of The Print SCU AE when encountering status codes in a N-CREATE response is summarized
in the Table below:
Table 4.2-89
FILM SESSION SOP CLASS N-CREATE RESPONSE STATUS HANDLING BEHAVIOR
Service Further
Status Code Behavior
Status Meaning
Success Success 0000 The SCP has completed the operation successfully.
Warning Attribute Value 0116H The N-CREATE operation is considered successful if it is
Out of Range configured that the status would be considered successful.
Warning Attribute List 0107H The N-CREATE operation is considered successful if it is
Error configured that the status would be considered successful.
* * Any other The Association is aborted using A-ABORT and the print-job is
status code. marked as failed. The status meaning is logged and reported
to the user.

4.2.8.3.1.5.2 Film Session SOP Class Operations (N-DELETE)

The behavior of The Print SCU AE when encountering status codes in a N-DELETE response is summarized
in the Table below:
Table 4.2-90
PRINTER SOP CLASS N-DELETE RESPONSE STATUS HANDLING BEHAVIOR
Service Further
Status Code Behavior
Status Meaning
Success Success 0000 The SCP has completed the operation successfully.
* * Any other The Association is aborted using A-ABORT and the print-job is
status code. marked as failed. The status meaning is logged and reported to
the user.

62
 No. MIICT0057EA

4.2.8.3.1.6 SOP Specific Conformance for the Film Box SOP Class
The Print SCU AE supports the following DIMSE operations for the Film Box SOP Class:

— N-CREATE
— N-ACTION

Details of the supported attributes and status handling behavior are described in the following subsections.

4.2.8.3.1.6.1 Film Box SOP Class Operations (N-CREATE)

The attributes supplied in an N-CREATE Request are listed in the Table below:

Table 4.2-91
FILM BOX SOP CLASS N-CREATE REQUEST ATTRIBUTES
Presence
Attribute Name Tag VR Value Source
of Value
Image Display Format (2010,0010) ST STANDARD\C,R ALWAYS User
Referenced Film Session
(2010,0500) SQ ALWAYS Auto
Sequence
>Referenced SOP Class
(0008,1150) UI 1.2.840.10008.5.1.1.1 ALWAYS Auto
UID
>Referenced SOP Instance From created Film Session SOP
(0008,1155) UI ALWAYS Auto
UID Instance
Film Orientation (2010,0040) CS PORTRAIT or LANDSCAPE ALWAYS User
14INX17IN, 14INX14IN,
Film Size ID (2010,0050) CS 11INX14IN, 11INX11IN, ALWAYS User
85INX11IN, 8INX10IN, etc.
REPLICATE, BILINEAR, CUBIC
Magnification Type (2010,0060) CS ALWAYS User
or NONE
Smoothing Type (2010,0080) CS ANAP User
Border Density (2010,0100) CS BLACK or WHITE ALWAYS User
Empty Image Density (2010,0110) CS BLACK or WHITE ALWAYS User
Min Density (2010,0120) US 0 .. 9999 ALWAYS User
Max Density (2010,0130) US 0 .. 9999 ALWAYS User
Trim (2010,0140) CS YES or NO ALWAYS User
Configuration Information (2010,0150) ST ALWAYS Auto

63
 No. MIICT0057EA

The behavior of the Print SCU AE when encountering status codes in a N-CREATE response is summarized
in the Table below:
Table 4.2-92
FILM BOX SOP CLASS N-CREATE RESPONSE STATUS HANDLING BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has completed the operation
successfully.
Warning Requested Min Density or B605 The N-CREATE operation is considered successful
Max Density outside of if it is configured that the status would be
printer’s operating range considered successful.
* * Any other The Association is aborted using A-ABORT and
status the print-job is marked as failed. The status
code. meaning is logged and reported to the user.

64
 No. MIICT0057EA

4.2.8.3.1.6.2 Film Box SOP Class Operations (N-ACTION)

An N-ACTION Request is issued to instruct the Print SCP to print the contents of the Film Box. The Action
Reply argument in an N-ACTION response is not evaluated.
The behavior of The Print SCU AE when encountering status codes in a N-ACTION response is summarized
in the Table below:
Table 4.2-93
FILM BOX SOP CLASS N-ACTION RESPONSE STATUS HANDLING BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has completed the operation
successfully. The film has been
accepted for printing.
Warning Film Box SOP Instance hierarchy does B603 The N-ACTION operation is considered
not contain Image Box SOP Instances successful if it is configured that the
(empty page) status would be considered successful.
Warning Image size is larger than Image Box size. B604 The N-ACTION operation is considered
The image has been demagnified. successful if it is configured that the
status would be considered successful.
Warning Image size is larger than Image Box size. B609 The N-ACTION operation is considered
The image has been cropped to fit. successful if it is configured that the
status would be considered successful.
Warning Image size or Combined Print Image Size B60A The N-ACTION operation is considered
is larger than Image Box size. The image successful if it is configured that the
or combined Print Image has been status would be considered successful.
decimated to fit.
Failure Unable to create Print Job SOP Instance; C602 The Association is aborted using
print queue is full. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Image size is larger than Image Box size. C603 The Association is aborted using
A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Combined Print Image Size is larger than C613 The Association is aborted using
Image Box size. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
* * Any other The Association is aborted using
status A-ABORT and the print-job is marked as
code. failed. The status meaning is logged
and reported to the user.

65
 No. MIICT0057EA

4.2.8.3.1.7 SOP Specific Conformance for the Grayscale Image Box SOP Class
The Print SCU AE supports the following DIMSE operations for the Grayscale Image Box SOP Class:

— N-SET

Details of the supported attributes and status handling behavior are described in the following subsections.

4.2.8.3.1.7.1 Grayscale Image Box SOP Class Operations (N-SET)

The attributes supplied in an N-SET Request are listed in the Table below:
Table 4.2-94
GRAYSCALE IMAGE BOX SOP CLASS N-SET REQUEST ATTRIBUTES
Presence
Attribute Name Tag VR Value Source
of Value
Image Position (2020,0010) US 1 .. 36 ALWAYS Auto
Polarity (2020,0020) CS NORMAL or REVERSE ALWAYS User
REPLICATE, BILINEAR, CUBIC
Magnification Type (2010,0060) CS ALWAYS User
or NONE
Smoothing Type (2010,0080) CS ANAP User
Basic Grayscale Image
(2020,0110) SQ ALWAYS Auto
Sequence
>Samples Per Pixel (0028,0002) US 1 ALWAYS Auto
>Photometric Interpretation (0028,0004) CS MONOCHROME2 ALWAYS Auto
>Rows (0028,0010) US ALWAYS Auto
>Columns (0028,0011) US ALWAYS Auto
>Pixel Aspect Ratio (0028,0034) IS 1\1 ALWAYS Auto
>Bits Allocated (0028,0100) US 8 ALWAYS Auto
>Bits Stored (0028,0101) US 8 ALWAYS Auto
>High Bit (0028,0102) US 7 ALWAYS Auto
>Pixel Representation (0028,0103) US 0 ALWAYS Auto
>Pixel Data (7FE0,0010) OB ALWAYS Auto

66
 No. MIICT0057EA

The behavior of the Print SCU AE when encountering status codes in a N-SET response is summarized in
the Table below:
Table 4.2-95
GRAYSCALE IMAGE BOX SOP CLASS N-SET RESPONSE STATUS HANDLING BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has completed the operation
successfully. Image successfully stored in
Image Box.
Warning Image size is larger than Image Box size. B604 The N-SET operation is considered
The image has been demagnified. successful if it is configured that the
status would be considered successful.
Warning Requested Min Density or Max Density B605 The N-SET operation is considered
outside of printer’s operating range. successful if it is configured that the
status would be considered successful.
Warning Image size is larger than Image Box size. B609 The N-SET operation is considered
The image has been cropped to fit. successful if it is configured that the
status would be considered successful.
Warning Image size or Combined Print Image Size B60A The N-SET operation is considered
is larger than Image Box size. The successful if it is configured that the
image or combined Print Image has been status would be considered successful.
decimated to fit.
Failure Image size is larger than Image Box size. C603 The Association is aborted using
A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Insufficient memory in printer to store the C605 The Association is aborted using
image. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Combined Print Image Size is larger than C613 The Association is aborted using
Image Box size. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
* * Any other The Association is aborted using
status A-ABORT and the print-job is marked as
code. failed. The status meaning is logged
and reported to the user.

67
 No. MIICT0057EA

4.2.8.3.1.8 SOP Specific Conformance for the Color Image Box SOP Class
The Print SCU AE supports the following DIMSE operations for the Color Image Box SOP Class:

— N-SET

Details of the supported attributes and status handling behavior are described in the following subsections.

4.2.8.3.1.8.1 Color Image Box SOP Class Operations (N-SET)

The attributes supplied in an N-SET Request are listed in the Table below:
Table 4.2-96
COLOR IMAGE BOX SOP CLASS N-SET REQUEST ATTRIBUTES
Presence
Attribute Name Tag VR Value Source
of Value
Image Position (2020,0010) US 1 .. 36 ALWAYS Auto
REPLICATE, BILINEAR, CUBIC
Magnification Type (2010,0060) CS ALWAYS User
or NONE
Smoothing Type (2010,0080) CS ANAP User
Basic Grayscale Image
(2020,0110) SQ ALWAYS Auto
Sequence
>Samples Per Pixel (0028,0002) US 3 ALWAYS Auto
>Photometric Interpretation (0028,0004) CS RGB ALWAYS Auto
>Planar Condition (0028,0006) US 0x0001 ALWAYS Auto
>Rows (0028,0010) US ALWAYS Auto
>Columns (0028,0011) US ALWAYS Auto
>Pixel Aspect Ratio (0028,0034) IS 1\1 ALWAYS Auto
>Bits Allocated (0028,0100) US 8 ALWAYS Auto
>Bits Stored (0028,0101) US 8 ALWAYS Auto
>High Bit (0028,0102) US 7 ALWAYS Auto
>Pixel Representation (0028,0103) US 0 ALWAYS Auto
>Pixel Data (7FE0,0010) OB ALWAYS Auto

68
 No. MIICT0057EA

The behavior of the Print SCU AE when encountering status codes in a N-SET response is summarized in
the Table below:
Table 4.2-97
COLOR IMAGE BOX SOP CLASS N-SET RESPONSE STATUS HANDLING BEHAVIOR
Service Status
Further Meaning Behavior
Status Code
Success Success 0000 The SCP has completed the operation
successfully. Image successfully stored in
Image Box.
Warning Image size is larger than Image Box size. B604 The N-SET operation is considered
The image has been demagnified. successful if it is configured that the
status would be considered successful.
Warning Requested Min Density or Max Density B605 The N-SET operation is considered
outside of printer’s operating range. successful if it is configured that the
status would be considered successful.
Warning Image size is larger than Image Box size. B609 The N-SET operation is considered
The image has been cropped to fit. successful if it is configured that the
status would be considered successful.
Warning Image size or Combined Print Image Size B60A The N-SET operation is considered
is larger than Image Box size. The successful if it is configured that the
image or combined Print Image has been status would be considered successful.
decimated to fit.
Failure Image size is larger than Image Box size. C603 The Association is aborted using
A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Insufficient memory in printer to store the C605 The Association is aborted using
image. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
Failure Combined Print Image Size is larger than C613 The Association is aborted using
Image Box size. A-ABORT and the print-job is marked as
failed. The status meaning is logged
and reported to the user.
* * Any other The Association is aborted using
status A-ABORT and the print-job is marked as
code. failed. The status meaning is logged
and reported to the user.

4.2.8.4 Association Acceptance Policy

The Print SCU AE does not accept Associations.

69
 No. MIICT0057EA

4.3 NETWORK INTERFACES

4.3.1 Physical Network Interface

This Product supports a single network interface. One of the following physical network interfaces will be
available depending on installed hardware options:
Table 4.3-1
SUPPORTED PHYSICAL NETWORK INTERFACES

Ethernet 1000baseT
Ethernet 100baseT
Ethernet 10baseT

4.3.2 Additional Protocols

None.

4.4 CONFIGURATION

4.4.1 AE Title/Presentation Address Mapping

4.4.1.1 Local AE Titles

All local applications use the AE Titles and TCP/IP Ports configured via the Service/Installation Tool. The
Field Service Engineer can configure the TCP Port via the Service/Installation Tool.
Table 4.4-1
AE TITLE CONFIGURATION TABLE
Application Entity Default AE Title Default TCP/IP Port
MWM SCU
MPPS SCU
Q/R SCU Not Applicable
Print SCU TM_CT_CMW_V3.00
Storage SCU
Storage SCP
Q/R SCP 2700
Storage Commitment SCU

4.4.1.2 Remote AE Title/Presentation Address Mapping

The AE Titles, host names and port numbers of remote applications are configured using the
Service/Installation Tool.

70
 No. MIICT0057EA

4.4.2 Parameters
A large number of parameters related to acquisition and general operation can be configured using the
Service/Installation Tool. The Table below only shows those configuration parameters relevant to DICOM
communication. See the Product’s Service Manual for details on general configuration capabilities.
Table 4.4-2
CONFIGURATION PARAMETERS TABLE
Parameter Configurable Default Value
(Yes/No)
[Range]
General Parameters
Max PDU Receive Size Yes 16 Kbytes
Max PDU Send Size [1-999999]
Time-out waiting for a acceptance or rejection response to an Yes 30 Sec
Association Request (Application Level Timeout) [1-999999]
Time-out waiting for a response to an Association release request Yes 15 sec
(Application Level Timeout) [1-999999]
Time-out waiting for completion of a TCP/IP connect request Yes 15 sec
(Low-level timeout) [1-999999]
Time-out awaiting a Response to a DIMSE Request (Low-Level Yes 15 sec
Timeout) [1-999999]
Time-out for waiting for data between TCP/IP-packets (Low Level Yes 15 sec
Timeout) [1-999999]
Storage SCU Parameters
Storage SCU time-out waiting for a response to a C-STORE-RQ Yes 180sec
[1-999999]
Number of times a failed send job may be retried No Forever, until the
job succeeds or
user deletes the
job.
Delay between retrying failed send jobs No 60sec
Maximum number of simultaneously initiated Associations by the No 2
Storage SCU AE
Supported Transfer Syntaxes (separately configurable for each Yes Implicit VR Little
remote AE) Endian
Behavior when receiving the Warning “Coercion of Data Elements” as Yes Considered as
service status. [Considered Failure
as Success or
Failure]
Behavior when receiving the Warning “Data Set does not match SOP Yes Considered as
Class” as service status. [Considered Failure
as Success or
Failure]
Behavior when receiving the Warning “Elements Discarded” as Yes Considered as
service status. [Considered Failure
as Success or
Failure]
Storage Commitment SCU Parameters

71
 No. MIICT0057EA

Parameter Configurable Default Value

(Yes/No)
[Range]
Storage Commitment SCU time-out waiting for a response to a Yes 180 Sec
N-ACTIION-RQ [1-999999]
Maximum number of simultaneously initiated Associations by the No 1
Storage Commitment SCU AE
Timeout waiting for a Storage Commitment Notification (maximum Yes 72Hours
duration of applicability for a Storage Commitment Transaction UID). [1-1728]
Maximum number of simultaneously accepted Associations by the No 3
Storage Commitment SCU AE
Delay association release after sending a Storage Commitment No 0
Request (wait for a Storage Commitment Notification over the same
association).
Behavior when receiving N-EVENT Report - the Storage Commitment No The committed
Request Successful. mark is set to the
corresponding data
in the local
database.
The database
browser shows the
mark.
Q/R SCP parameters
Maximum number of simultaneously accepted Associations by the No 3
Q/R SCP AE
Modality Worklist SCU Parameters
Modality Worklist SCU time-out waiting for the final response to a Yes 180sec
C-FIND-RQ [1-999999]
Maximum number of simultaneously initiated Associations by the No 1
MWM SCU AE
MPPS SCU Parameters
MPPS SCU time-out waiting for a response to a N-CREATE-RQ Yes 180sec
[1-999999]
MPPS SCU time-out waiting for a response to a N-SET-RQ Yes 180sec
[1-999999]
MPPS SCU time-out waiting for a response to a N-GET-RQ Yes 180sec
[1-999999]
Maximum number of simultaneously initiated Associations by the No 1
MPPS SCU AE
Supported Transfer Syntaxes for MPPS Yes Implicit VR Little
Endian
Behavior when receiving the Warning “Attribute Value Out of Range” Yes Considered as
as service status. [Considered Failure
as Success or
Failure]
Storage SCP parameters
Maximum number of simultaneously accepted Associations by the No 3
Storage SCP AE
Print SCU Parameters

72
 No. MIICT0057EA

Parameter Configurable Default Value

(Yes/No)
[Range]
Print SCU time-out waiting for a response to a N-GET-RQ Yes 180sec
[1-999999]
Print SCU time-out waiting for a response to a N-CREATE-RQ Yes 180sec
[1-999999]
Print SCU time-out waiting for a response to a N-SET-RQ Yes 180sec
[1-999999]
Print SCU time-out waiting for a response to a N-ACTION-RQ Yes 180sec
[1-999999]
Maximum number of simultaneously initiated Associations by the No 1
Print SCU AE
Supported Transfer Syntaxes (separately configurable for each Yes Implicit VR Little
remote printer) Endian
Behavior when receiving the Warning “Attribute Value Out of Range” Yes Considered as
as service status of the Film Session N-CREATE. [Considered Failure
as Success or
Failure]
Behavior when receiving the Warning “Attribute List Error” as service Yes Considered as
status of the Film Session N-CREATE. [Considered Failure
as Success or
Failure]
Behavior when receiving the Warning “Requested Min Density or Max Yes Considered as
Density outside of printer’s operating range” as service status of the [Considered Failure
Film Box N-CREATE. as Success or
Failure]
Behavior when receiving the Warning “Film Box SOP Instance Yes Considered as
hierarchy does not contain Image Box SOP Instances (empty page)” [Considered Failure
as service status of the Film Box N-ACTION. as Success or
Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been demagnified.” as service status [Considered Failure
of the Film Box N-ACTION. as Success or
Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been cropped to fit.” as service [Considered Failure
status of the Film Box N-ACTION. as Success or
Failure]
Behavior when receiving the Warning “Image size or Combined Print Yes Considered as
Image Size is larger than Image Box size. The image or combined [Considered Failure
Print Image has been decimated to fit.” as service status of the Film as Success or
Box N-ACTION. Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been demagnified. ” as service [Considered Failure
status of the Grayscale Image Box N-SET. as Success or
Failure]

73
 No. MIICT0057EA

Parameter Configurable Default Value

(Yes/No)
[Range]
Behavior when receiving the Warning “Requested Min Density or Max Yes Considered as
Density outside of printer’s operating range.” as service status of the [Considered Failure
Grayscale Image Box N-SET. as Success or
Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been cropped to fit.” as service [Considered Failure
status of the Grayscale Image Box N-SET. as Success or
Failure]
Behavior when receiving the Warning “Image size or Combined Print Yes Considered as
Image Size is larger than Image Box size. The image or combined [Considered Failure
Print Image has been decimated to fit.” as service status of the as Success or
Grayscale Image Box N-SET. Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been demagnified. ” as service [Considered Failure
status of the Color Image Box N-SET. as Success or
Failure]
Behavior when receiving the Warning “Requested Min Density or Max Yes Considered as
Density outside of printer’s operating range.” as service status of the [Considered Failure
Color Image Box N-SET. as Success or
Failure]
Behavior when receiving the Warning “Image size is larger than Yes Considered as
Image Box size. The image has been cropped to fit.” as service [Considered Failure
status of the Color Image Box N-SET. as Success or
Failure]
Behavior when receiving the Warning “Image size or Combined Print Yes Considered as
Image Size is larger than Image Box size. The image or combined [Considered Failure
Print Image has been decimated to fit.” as service status of the Color as Success or
Image Box N-SET. Failure]

74
 No. MIICT0057EA

5. MEDIA INTERCHANGE

5.1 IMPLEMENTATION MODEL

5.1.1 Application Data Flow

DVD-RAM
Storage
Export Medium
Image Files

Import
Image Files CD-R
Offline-Media
Storage
AE
Medium

Add
Image Files

DVD-R
Storage
Medium

Figure 5.1-1
APPLICATION DATA FLOW DIAGRAM FOR MEDIA STORAGE

— The Offline-Media AE exports image files to a CD-R, a DVD-R or a DVD-RAM Storage medium. It is
associated with the local real-world activity “Export Image Files” performed upon user request.
— The Offline-Media AE imports image files from a CD-R, a DVD-R or a DVD-RAM Storage medium. It is
associated with the local real-world activity “Import Image Files” performed upon user request.
— The Offline-Media AE updates image files on a CD-R, a DVD-R or a DVD-RAM Storage medium. It is
associated with the local real-world activity “Add Image Files” performed upon user request.

5.1.2 Functional Definition of AEs

5.1.2.1 Functional Definition of Offline-Media AE

The Offline-Media AE is performed upon user request for selected studies /series/images to/from an offline
DICOM CD-R, DVD-R or DVD-RAM medium. It therefore performs the following tasks:
Export:
— Builds DICOM Information Objects.
— Creates a DICOMDIR file that represents the contents of the DICOM Information Objects to be
recorded.
— Records DICOM Information Objects and the DICOMDIR file to the CD-R, the DVD-R or the
DVD-RAM medium.
Import:
— Reads the DICOMDIR file that represents the contents of the data as recorded.
— Displays the ordered list of studies/series/images, identifying information.

75
 No. MIICT0057EA

— Loads the selected studies/series/images from the CD-R, the DVD-R or the DVD-RAM medium and
displays them on the screen.
Addition:
— Reads a File-set of the CD-R, the DVD-R or the DVD-RAM medium and writes it to the local storage
device.
— Adds the studies/series/images to the File-Set, then writes it to the medium.
— Modifies the DICOMDIR file.

Note: The Offline-Media AE can update files created by the product itself.

76
 No. MIICT0057EA

5.1.3 Sequencing of Real-World Activities

5.1.3.1 Activity - Export Image Files

5.1.3.1.1 Activity-Export Image Files to CD-R

Operator requests to create new File-set(s) onto a new CD-R. The requests are placed in a queue and are
executed in the background.
The operations for “Export Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be created to the CD-R
medium.
Step-2: Select the image archiving.
Step-3: Select the Virtual Cash Disk as a destination.
Step-4: Request to copy to the CD-R.

5.1.3.1.2 Activity-Export Image Files to DVD-R

Operator requests to create new File-set(s) onto a new DVD-R. The requests are placed in a queue and are
executed in the background.
The operations for “Export Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be created to the DVD-R
medium.
Step-2: Select the image archiving.
Step-3: Select the Virtual Cash Disk as a destination.
Step-4: Request to copy to the DVD-R.

5.1.3.1.3 Activity-Export Image Files to DVD-RAM

Operator requests to create File-set(s) onto a new DVD-RAM. The requests are placed in a queue and are
executed in the background.
The operations for “Export Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be created to the
DVD-RAM medium.
Step-2: Select the image archiving.
Step-3: Select the DVD-RAM device as a destination.
Step-4: Request to copy to the DVD-RAM.

5.1.3.2 Activity - Import Image Files

Operator requests to retrieve File-set(s) on the CD-R, the DVD-R or the DVD-RAM. The requests are placed
in a queue and are executed in the background.
The operations for “Import Image Files” are described below:
Step-1: Select the CT image(s), SC image(s) and/or Standalone Curve information(s), series or studies
on the medium to be retrieved to the local storage device.
Step-2: Select the data retrieval.
Step-3: Select the local storage device as a destination.

77
 No. MIICT0057EA

5.1.3.3 Activity – Add Image Files

5.1.3.3.1 Activity-Add Image Files to CD-R

Operator requests to add new objects to an already existing File-set on the CD-R. The requests are placed in
a queue and are executed in the background.
The operations for “Add Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be added to the CD-R
medium.
Step-2: Select the image archiving.
Step-3: Select the Virtual Cash Disk as a destination.
Step-4: Request to copy to the CD-R.

5.1.3.3.2 Activity-Add Image Files to DVD-R

Operator requests to add new objects to an already existing File-set on the DVD-R. The requests are placed
in a queue and are executed in the background.
The operations for “Add Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be added to the DVD-R
medium.
Step-2: Select the image archiving.
Step-3: Select the Virtual Cash Disk as a destination.
Step-4: Request to copy to the DVD-R.

5.1.3.3.3 Activity-Add Image Files to DVD-RAM

Operator requests to add new objects to an already existing File-set on the DVD-RAM. The requests are
placed in a queue and are executed in the background.
The operations for “Add Image Files” are described below:
Step-1: Select the instance(s), series or studies on the local storage device to be added to the
DVD-RAM medium.
Step-2: Select the image archiving.
Step-3: Select the DVD-RAM device as a destination.
Step-4: Request to copy to the DVD-RAM.

5.1.4 File Meta Information for Implementation Class and Version

The implementation information written to the File Meta Header in each file is:

Table 5.1-1
DICOM IMPLEMENTATION CLASS AND VERSION FOR MEDIA STORAGE

File Meta Information Version 1

Implementation Class UID 1.2.392.200036.9116.2.6.1.100

Implementation Version Name TM_CT_CMW_V3.00

78
 No. MIICT0057EA

5.2 AE SPECIFICATIONS

5.2.1 Offline-Media AE Specification

The Offline-Media AE provides standard conformance to the DICOM Interchange Option of the Media
Storage Service Class. The Application Profiles and roles are listed below:
Table 5.2-1
APPLICATION PROFILES, ACTIVITIES AND ROLES FOR OFFLINE-MEDIA

Application Profiles Supported Real World Activity Role SC Option

STD-CTMR-CD, STD-CTMR-DVD-RAM, Export Image Files FSC Interchange
STD-GEN-CD, STD-GEN-DVD-JPEG,
STD-GEN-DVD-RAM,
PRI-TSB-CT-CD, PRI-TSB-CT-DVD,
PRI-TSB-CT-DVD-RAM
STD-GEN-CD, STD-GEN-DVD-RAM, Add Image Files FSU Interchange
PRI-TSB-CT-CD, PRI-TSB-CT-DVD,
PRI-TSB-CT-DVD-RAM
STD-GEN-CD, STD-GEN-DVD-JPEG, Import Image Files FSR Interchange
STD-GEN-DVD-RAM,
PRI-TSB-CT-CD, PRI-TSB-CT-DVD,
PRI-TSB-CT-DVD-RAM

5.2.1.1 File Meta Information for the Application Entity

The Offline-Media AE does not set the Source Application Entity Title.

5.2.1.2 Real-World Activities

5.2.1.2.1 Activity – Export Image Files

The Offline-Media AE acts as an FSC using the interchange option when requested to export SOP Instances
from the local database to a CD-R, a DVD-R or a DVD-RAM medium.

5.2.1.2.1.1 Media Storage Application Profiles

The Offline-Media AE supports the STD-CTMR-CD, the STD-CTMR-DVD-RAM, the STD-GEN-CD, the
STD-GEN-DVD-JPEG, the STD-GEN-DVD-RAM, the PRI-TSB-CT-CD, the PRI-TSB-CT-DVD and the
PRI-TSB-CT-DVD-RAM Application Profile.

79
 No. MIICT0057EA

5.2.1.2.1.1.1 Options
The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
STD-CTMR-CD, the STD-CTMR-DVD-RAM Application Profile as an FSC.
Table 5.2-2
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE STD-CTMR-CD AND THE
STD-CTMR-DVD-RAM PROFILE (FSC)
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Directory Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])*
*: The JPEG Transfer Syntax is not supported for the STD-CTMR-DVD-RAM.

80
 No. MIICT0057EA

The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
STD-GEN-CD, STD-GEM-DVD-JPEG and the STD-GEN-DVD-RAM Application Profile as an FSC.
Table 5.2-3
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE STD-GEN-CD, THE STD-GEN-DVD-JPEG
AND THE STD-GEN-DVD-RAM PROFILE (FSC)
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Directory Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Color, RGB) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Color, RGB) Prediction (Process 14
[Selection Value 1])*
Standalone Curve 1.2.840.10008.5.1.4.1.1.9 Explicit VR Little Endian
1.2.840.10008.1.2.1
Storage
Uncompressed
Enhanced CT Image Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.2.1 1.2.840.10008.1.2.1
Storage
Uncompressed
Grayscale Softcopy 1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little Endian
Presentation State 1.2.840.10008.1.2.1
Storage Uncompressed

Explicit VR Little Endian

Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 1.2.840.10008.1.2.1
Uncompressed
X-Ray Radiation Dose Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.88.67 1.2.840.10008.1.2.1
SR Storage
Uncompressed
*: The JPEG Transfer Syntax is not supported for the STD-GEN-DVD-RAM.

81
 No. MIICT0057EA

The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
PRI-TSB-CT-CD, PRI-TSB-CT-DVD and the PRI-TSB-CT-DVD-RAM Application Profile as an FSC.
Table 5.2-4
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE PRI-TSB-CT-CD, THE PRI-TSB-CT-DVD
AND THE PRI-TSB-CT-DVD-RAM PROFILE (FSC)
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Directory Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Color, RGB) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Color, RGB) Prediction (Process 14
[Selection Value 1])*
Standalone Curve 1.2.840.10008.5.1.4.1.1.9 Explicit VR Little Endian
1.2.840.10008.1.2.1
Storage
Uncompressed
Enhanced CT Image Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.2.1 1.2.840.10008.1.2.1
Storage
Uncompressed
Grayscale Softcopy 1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little Endian
Presentation State 1.2.840.10008.1.2.1
Storage Uncompressed

Explicit VR Little Endian

Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 1.2.840.10008.1.2.1
Uncompressed
X-Ray Radiation Dose Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.88.67 1.2.840.10008.1.2.1
SR Storage
Uncompressed
TOSHIBA CT 1.2.392.200036.9116.2.6.1.1 Explicit VR Little Endian
1.2.840.10008.1.2.1
Non-Image Storage
Uncompressed
*: The JPEG Transfer Syntax is not supported for the PRI-TSB-CT-DVD-RAM.

82
 No. MIICT0057EA

5.2.1.2.2 Activity – Import Image Files

The Offline-Media AE acts as an FSR using the interchange option when requested to import SOP Instances
from a CD-R, a DVD-R or a DVD-RAM medium to the local database.

5.2.1.2.2.1 Media Storage Application Profiles

The Offline-Media AE supports the STD-GEN-CD, the STD-GEN-DVD-JPEG, the STD-GEN-DVD-RAM the
PRI-TSB-CT-CD, the PRI-TSB-CT-DVD and the PRI-TSB-CT-DVD-RAM Application Profile.

5.2.1.2.2.1.1 Options
The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
STD-GEN-CD, and STD-GEN-DVD-JPEG and the STD-GEN-DVD-RAM Application Profile as an FSR.
Table 5.2-5
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE STD-GEN-CD, THE STD-GEN-DVD-JPEG
AND THE STD-GEN-DVD-RAM PROFILE (FSR)
Transfer Syntax
Information Object Definition SOP Class UID Transfer Syntax
UID

Explicit VR Little
Media Storage Directory Storage 1.2.840.10008.1.3.10 Endian 1.2.840.10008.1.2.1
Uncompressed

Implicit VR Little
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Endian 1.2.840.10008.1.2
Uncompressed

Explicit VR Little
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Endian 1.2.840.10008.1.2.1
Uncompressed

JPEG Lossless,
Non-Hierarchical,
First-Order 1.2.840.10008.1.2.4
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Prediction .70
(Process 14
[Selection Value
1])

Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 Explicit VR Little

Endian 1.2.840.10008.1.2.1
(Grayscale)
Uncompressed

Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 Implicit VR Little

Endian 1.2.840.10008.1.2
(Grayscale)
Uncompressed

1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Non-Hierarchical,
Secondary Capture Image Storage First-Order 1.2.840.10008.1.2.4
(Grayscale) Prediction .70
(Process 14
[Selection Value
1])

Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 Explicit VR Little

Endian 1.2.840.10008.1.2.1
(Color, RGB)
Uncompressed

83
 No. MIICT0057EA

Secondary Capture Image Storage 1.2.840.10008.5.1.4.1.1.7 Implicit VR Little

Endian 1.2.840.10008.1.2
(Color, RGB)
Uncompressed

1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Non-Hierarchical,
Secondary Capture Image Storage First-Order 1.2.840.10008.1.2.4
(Color, RGB) Prediction .70
(Process 14
[Selection Value
1])
1.2.840.10008.5.1.4.1.1.9 Explicit VR Little
Standalone Curve Storage Endian 1.2.840.10008.1.2.1
Uncompressed
1.2.840.10008.5.1.4.1.1.9 Implicit VR Little
Standalone Curve Storage Endian 1.2.840.10008.1.2
Uncompressed
Explicit VR Little
Enhanced CT Image Storage 1.2.840.10008.5.1.4.1.1.2.1 Endian 1.2.840.10008.1.2.1
Uncompressed
1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little
Grayscale Softcopy Presentation
Endian 1.2.840.10008.1.2.1
State Storage
Uncompressed
Explicit VR Little
Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.2 Endian 1.2.840.10008.1.2.1
2
Uncompressed
Explicit VR Little
X-Ray Radiation Dose SR Storage 1.2.840.10008.5.1.4.1.1.88.6 Endian 1.2.840.10008.1.2.1
7
Uncompressed
Note:
The Offline-Media AE can import Enhanced CT Image Object exported by the Offline-Media AE.

84
 No. MIICT0057EA

The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
PRI-TSB-CT-CD, PRI-TSB-CT-DVD and the PRI-TSB-CT-DVD-RAM Application Profile as an FSR.
Table 5.2-6
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE PRI-TSB-CT-CD, THE PRI-TSB-CT-DVD
AND THE PRI-TSB-CT-DVD-RAM PROFILE (FSR)

Information Object Definition SOP Class UID Transfer Syntax Transfer Syntax UID

Media Storage Directory Explicit VR Little

1.2.840.10008.1.3.10 Endian 1.2.840.10008.1.2.1
Storage
Uncompressed

Implicit VR Little
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Endian 1.2.840.10008.1.2
Uncompressed

Explicit VR Little
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Endian 1.2.840.10008.1.2.1
Uncompressed

JPEG Lossless,
Non-Hierarchical,
First-Order
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Prediction 1.2.840.10008.1.2.4.70
(Process 14
[Selection Value
1])
Secondary Capture Image 1.2.840.10008.5.1.4.1.1.7 Explicit VR Little
Storage Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed
Secondary Capture Image 1.2.840.10008.5.1.4.1.1.7 Implicit VR Little
Storage Endian 1.2.840.10008.1.2
(Grayscale) Uncompressed

1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Non-Hierarchical,
Secondary Capture Image First-Order
Storage Prediction 1.2.840.10008.1.2.4.70
(Grayscale) (Process 14
[Selection Value
1])
Secondary Capture Image 1.2.840.10008.5.1.4.1.1.7 Explicit VR Little
Storage Endian 1.2.840.10008.1.2.1
(Color, RGB) Uncompressed
Secondary Capture Image 1.2.840.10008.5.1.4.1.1.7 Implicit VR Little
Storage Endian 1.2.840.10008.1.2
(Color, RGB) Uncompressed

1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Non-Hierarchical,
Secondary Capture Image First-Order
Storage Prediction 1.2.840.10008.1.2.4.70
(Color, RGB) (Process 14
[Selection Value
1])

85
 No. MIICT0057EA

1.2.840.10008.5.1.4.1.1.9 Explicit VR Little

Standalone Curve Storage Endian 1.2.840.10008.1.2.1
Uncompressed
1.2.840.10008.5.1.4.1.1.9 Implicit VR Little
Standalone Curve Storage Endian 1.2.840.10008.1.2
Uncompressed
Explicit VR Little
Enhanced CT Image Storage 1.2.840.10008.5.1.4.1.1.2.1 Endian 1.2.840.10008.1.2.1
Uncompressed
1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little
Grayscale Softcopy
Endian 1.2.840.10008.1.2.1
Presentation State Storage
Uncompressed
Explicit VR Little
Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 Endian 1.2.840.10008.1.2.1
Uncompressed
Explicit VR Little
X-Ray Radiation Dose SR
Storage 1.2.840.10008.5.1.4.1.1.88.67 Endian 1.2.840.10008.1.2.1
Uncompressed
1.2.392.200036.9116.2.6.1.1 Explicit VR Little
TOSHIBA CT Non-Image
Endian 1.2.840.10008.1.2.1
Storage
Uncompressed
Note:
The Offline-Media AE can import Enhanced CT Image Object exported by the Offline-Media AE.

86
 No. MIICT0057EA

5.2.1.2.3 Activity – Add Image Files

The Offline-Media AE acts as an FSU using the interchange option when requested to add SOP Instances to
a CD-R, a DVD-R or a DVD-RAM medium.

5.2.1.2.3.1 Media Storage Application Profiles

The Offline-Media AE supports the STD-GEN-CD, the STD-GEN-DVD-RAM, the PRI-TSB-CT-CD, the
PRI-TSB-CT-DVD and the PRI-TSB-CT-DVD-RAM Application Profile.

87
 No. MIICT0057EA

5.2.1.2.3.1.1 Options
The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
STD-GEN-CD and STD-GEN-DVD-RAM Application Profile as an FSU.
Table 5.2-7
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE STD-GEN-CD AND THE
STD-GEN-DVD-RAM PROFILE (FSU)
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Directory Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Color, RGB) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Color, RGB) Prediction (Process 14
[Selection Value 1])*
Standalone Curve 1.2.840.10008.5.1.4.1.1.9 Explicit VR Little Endian
1.2.840.10008.1.2.1
Storage
Uncompressed
Enhanced CT Image Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.2.1 1.2.840.10008.1.2.1
Storage
Uncompressed
Grayscale Softcopy 1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little Endian
Presentation State 1.2.840.10008.1.2.1
Storage Uncompressed

Explicit VR Little Endian

Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 1.2.840.10008.1.2.1
Uncompressed
X-Ray Radiation Dose Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.88.67 1.2.840.10008.1.2.1
SR Storage
Uncompressed
*: The JPEG Transfer Syntax is not supported for the STD-GEN-DVD-RAM.

88
 No. MIICT0057EA

The Offline-Media AE supports the SOP Classes and Transfer Syntaxes listed in the Table below for the
PRI-TSB-CT-CD, the PRI-TSB-CT-DVD and PRI-TSB-CT-DVD-RAM Application Profile as an FSU.
Table 5.2-8
IODS, SOP CLASSES AND TRANSFER SYNTAXES FOR THE PRI-TSB-CT-CD, THE PRI-TSB-CT-DVD
AND THE PRI-TSB-CT-DVD-RAM PROFILE (FSU)
Information Object
SOP Class UID Transfer Syntax Transfer Syntax UID
Definition

Media Storage Explicit VR Little Endian

1.2.840.10008.1.3.10 1.2.840.10008.1.2.1
Directory Storage Uncompressed

CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Explicit VR Little Endian 1.2.840.10008.1.2.1

Uncompressed

JPEG Lossless,
CT Image Storage 1.2.840.10008.5.1.4.1.1.2 Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Grayscale) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Grayscale) Prediction (Process 14
[Selection Value 1])*
Secondary Capture 1.2.840.10008.5.1.4.1.1.7
Image Storage Explicit VR Little Endian 1.2.840.10008.1.2.1
(Color, RGB) Uncompressed

Secondary Capture 1.2.840.10008.5.1.4.1.1.7 JPEG Lossless,

Image Storage Non-Hierarchical,First-Order 1.2.840.10008.1.2.4.70
(Color, RGB) Prediction (Process 14
[Selection Value 1])*
Standalone Curve 1.2.840.10008.5.1.4.1.1.9 Explicit VR Little Endian
1.2.840.10008.1.2.1
Storage
Uncompressed
Enhanced CT Image Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.2.1 1.2.840.10008.1.2.1
Storage
Uncompressed
Grayscale Softcopy 1.2.840.10008.5.1.4.1.1.11.1 Explicit VR Little Endian
Presentation State 1.2.840.10008.1.2.1
Storage Uncompressed

Explicit VR Little Endian

Enhanced SR Storage 1.2.840.10008.5.1.4.1.1.88.22 1.2.840.10008.1.2.1
Uncompressed
X-Ray Radiation Dose Explicit VR Little Endian
1.2.840.10008.5.1.4.1.1.88.67 1.2.840.10008.1.2.1
SR Storage
Uncompressed
TOSHIBA CT 1.2.392.200036.9116.2.6.1.1 Explicit VR Little Endian
1.2.840.10008.1.2.1
Non-Image Storage
Uncompressed
*: The JPEG Transfer Syntax is not supported for the PRI-TSB-CT-DVD-RAM.

89
 No. MIICT0057EA

5.3 AUGMENTED AND PRIVATE APPLICATION PROFILES

5.3.1 Augmented Application Profiles

Not applicable to this product

5.3.2 Private Application Profiles

5.3.2.1 Private Application Profiles – PRI-TSB-CT-CD-R and PRI-TSB-CT-DVD

5.3.2.1.1 SOP Class Privatizations

The Private Application Profile supports following SOP Class UID and Transfer Syntax.
Table 5.3-1
SOP Class Privatizations

Transfer Syntax
Information Object Definition SOP Class UID Transfer Syntax
UID

Explicit VR Little
Toshiba CT Non-Image Storage 1.2.392.200036.9116.2.6.1.1 Endian 1.2.840.10008.1.2.1
Uncompressed

5.3.2.1.2 Directory Privatizations

Additional key attributes for this profile are listed in the table below.
Table 5.3-2
Additional key attributes for PRI-TSB-CT-CD-R and PRI-TSB-CT-DVD Application Profile

Directory
Key Attribute Tag Notes
Record Type
Organ (7005,xx0d) STUDY Typical organ in the Study
Main Modality in Study (7005,xx30) STUDY Main Modality in the Study
Filter (7005,xx0b) SERIES Typical Image Filter in the Series.
Patient Direction (7005,xx0f) SERIES Patient Direction, “HF”, “FF”, etc.
Series Comment (7005,xx11) SERIES Series Comment
Patient Position (7005,xx12) SERIES Patient Position, “SU”, “PR”, etc.
Expert Plan No. (7005,xx13) SERIES Expert Plan (Examination Plan) No.
Reconstruction ROI No. (7005,xx14) SERIES Reconstruction ROI No.
Special Helical ACQ No. (7005,xx15) SERIES Special Helical Acquisition No.
Convolution Kernel (7005,xx1b) SERIES Typical Convolution Kernel in the Series
Typical Contrast/Bolus Agent in the
Contrast/Bolus Agent (7005,xx1c) SERIES
Series.
Filter (7005,xx0b) IMAGE Image Filter
IMAGE, CURVE,
File Type Remarks (7005,xx0e) File Type Remarks
PRIVATE

90
 No. MIICT0057EA

5.3.2.1.3 Other Privatizations

Not applicable to this product

91
 No. MIICT0057EA

5.3.2.2 Private Application Profiles – PRI-TSB-CT-DVD-RAM

5.3.2.2.1 SOP Class Privatizations

The Private Application Profile supports following SOP Class UID and Transfer Syntax.
Table 5.3-3
SOP Class Privatizations

Transfer Syntax
Information Object Definition SOP Class UID Transfer Syntax
UID

Explicit VR Little
Toshiba CT Non-Image Storage 1.2.392.200036.9116.2.6.1.1 Endian 1.2.840.10008.1.2.1
Uncompressed

5.3.2.2.2 Directory Privatizations

Additional key attributes for this profile are listed in the table below.
Table 5.3-4
Additional key attributes for PRI-TSB-CT-DVD-RAM Application Profile

Directory
Key Attribute Tag Notes
Record Type
Organ (7005,xx0d) STUDY Typical organ in the Study
Main Modality in Study (7005,xx30) STUDY Main Modality in the Study
Protect Mark for Study
(7005,xxf3) STUDY Study Protection Mark, “P” or “ “.
Record
Filter (7005,xx0b) SERIES Typical Image Filter in the Series.
Patient Direction (7005,xx0f) SERIES Patient Direction, “HF”, “FF”, etc.
Series Comment (7005,xx11) SERIES Series Comment
Patient Position (7005,xx12) SERIES Patient Position, “SU”, “PR”, etc.
Expert Plan No. (7005,xx13) SERIES Expert Plan (Examination Plan) No.
Reconstruction ROI No. (7005,xx14) SERIES Reconstruction ROI No.
Special Helical ACQ No. (7005,xx15) SERIES Special Helical Acquisition No.
Convolution Kernel (7005,xx1b) SERIES Typical Convolution Kernel in the Series
Typical Contrast/Bolus Agent in the
Contrast/Bolus Agent (7005,xx1c) SERIES
Series.
Protect Mark for Series
(7005,xxf2) SERIES Series Protection Mark, “P” or “ “.
Record
Filter (7005,xx0b) IMAGE Image Filter
IMAGE, CURVE,
File Type Remarks (7005,xx0e) File Type Remarks
PRIVATE
Protect Mark for Image, IMAGE, CURVE,
(7005,xxf1) Instance Protection Mark, “P” or “ “.
Curve or Private Record PRIVATE

5.3.2.2.3 Other Privatizations

Not applicable to this product

92
 No. MIICT0057EA

5.4 MEDIA CONFIGURATION

Not applicable to the Offline-Media AE.

93
 No. MIICT0057EA

6. SUPPORT OF CHARACTER SETS

This product supports the following character sets:
・ ISO-IR 6 (default) ISO 646
・ ISO-IR 100 (Latin alphabet No.1) Supplementary set of ISO 8859
・ ISO-IR 144 (Cyrillic) Supplementary set of ISO 8859
・ ISO -IR 13 (Japanese)(Option) JIS X 0201 (Katakana)
・ ISO -IR 14 (Japanese)(Option) JIS X 0201 (Romaji)
・ ISO -IR 87 (Japanese) JIS X 0208 (Kanji)
Character sets ISO-IR 100, ISO-IR 144, ISO -IR 13, ISO -IR 14 and ISO -IR 87 can be set to the tags listed in
the Table below;
Note:
The Escape Sequence for ISO-IR 13 is requested before the use of the character set in all cases.
Table 6-1
Tag lists for ISO-IR 100/13/14/87

Attribute Name Tag VR

Referring Physician’s Name (0008,0090) PN
Performing Physician’s Name (0008,1050) PN
Name of Physician(s) Reading Study (0008,1060) PN
Operators’ Name (0008,1070) PN
Patient’s Name (0010,0010) PN
Patient Comments (0010,4000) LT
Contrast/Bolus Agent (0018,0010) LO
Protocol Name (0018,1030) LO
Contrast/Bolus Route (0018,1040) LO
Image Comments (0020,4000) LT
Requesting Service (0032,1033) LO

Note:
If the Storage SCP AE receives images that contain characters from unsupported character sets, it will
respond with “Cannot understand” to the C-STORE request.
If the Q/R SCP AE receives query requests that contain characters from unsupported character sets, it will
respond with “Unable to process” to the C-FIND request.
If the Storage SCP AE receives images that contain characters from “ISO-IR 100”, G1 characters can be
replaced to any G0 characters. The mapping of the replacement is configured using the Service Tool. The
Settings is performed by Toshiba Service Personnel at the time of installation of the product.

94
 No. MIICT0057EA

7. SECURITY
This product does not support any specific security measures.
It is assumed that the product is used within a secured environment. It is assumed that a secured
environment includes at a minimum:

a. Firewall or router protections to ensure that only approved external hosts have network access to
the product.

b. Firewall or router protections to ensure that the product only has network access to approved
external hosts and services.

c. Any communication with external hosts and services outside the locally secured environment use
appropriate secure network channels (e.g. such as a Virtual Private Network (VPN))

Other network security procedures such as automated intrusion detection may be appropriate in some
environments. Additional security features may be established by the local security policy and are beyond the
scope of this conformance statement.

95
 No. MIICT0057EA

8. ANNEXES

8.1 IOD CONTENTS

8.1.1 Created SOP Instances

Table 8.1-1 specifies the attributes of a CT Image transmitted by the Storage SCU AE.
Table 8.1-2 specifies the attributes of a Secondary Capture Image transmitted by the Storage SCU AE.
Table 8.1-3 specifies the attributes of a Standalone Curve transmitted by the Storage SCU AE.
Table 8.1-4 specifies the attributes of an Enhanced CT Image transmitted by the Storage SCU AE.
The following tables use a number of abbreviations. The abbreviations used in the “Presence of …” column
are:
VNAP Value Not Always Present (attribute sent zero length if no value is present)
ANAP Attribute Not Always Present
ALWAYS Always Present
EMPTY Attribute is sent without a value

The abbreviations used in the “Source” column:

MWL the attribute value source is from Modality Worklist
USER the attribute value source is from User input
AUTO the attribute value is generated automatically
MPPS the attribute value is the same as that use for Modality Performed Procedure Step
CONFIG the attribute value source is a configurable parameter

96
 No. MIICT0057EA

8.1.1.1 CT Image IOD

Table 8.1-1
IOD OF CREATED CT IMAGE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Frame of Frame of Reference
Table 8.1-15 ALWAYS
Reference
Equipment General Equipment Table 8.1-16 ALWAYS
Image General Image Table 8.1-17 ALWAYS
Image Plane Table 8.1-18 ALWAYS
Image Pixel Table 8.1-19 ALWAYS
Contrast/Bolus Table 8.1-20 Only if contrast media was used in this image
VOI LUT Table 8.1-21 ALWAYS
SOP Common Table 8.1-22 ALWAYS
CT Image Table 8.1-23 ALWAYS
Private Application Table 8.1-24 Only if private data are present

8.1.1.2 SC Image IOD

Table 8.1-2
IOD OF CREATED SC IMAGE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
SC Equipment Table 8.1-25 ALWAYS
Image General Image Table 8.1-17 ALWAYS
Image Pixel Table 8.1-26 ALWAYS
SC Image Table 8.1-27 ALWAYS
VOI LUT Table 8.1-28 ALWAYS
SOP Common Table 8.1-29 ALWAYS
Private Application Table 8.1-30 Only if private data are present

97
 No. MIICT0057EA

8.1.1.3 Standalone Curve IOD

Table 8.1-3
IOD OF CREATED STANDALONE CURVE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
Curve Curve Identification Table 8.1-31 ALWAYS
Curve Table 8.1-32 ALWAYS
SOP Common Table 8.1-33 ALWAYS
Private Application Table 8.1-34 Only if private data are present

98
 No. MIICT0057EA

8.1.1.4 Enhanced CT Image IOD

Table 8.1-4
IOD OF CREATED ENHANCED CT IMAGE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
CT Series Table 8.1-35 ALWAYS
Frame of Frame of Reference
Table 8.1-15 ALWAYS
Reference
Equipment General Equipment Table 8.1-16 ALWAYS
Image Image Pixel Table 8.1-36 ALWAYS
Enhanced
Table 8.1-37 Only if contrast media was applied
Contrast/Bolus
Multi-frame
Table 8.1-38 ALWAYS
Functional Groups
Multi-frame
Table 8.1-39 ALWAYS
Dimension
Cardiac
Table 8.1-40 Only if cardiac synchronization was applied
Synchronization
Respiratory
Table 8.1-41 Only if respiratory synchronization was applied
Synchronization
Acquisition Context Table 8.1-42 ALWAYS
Enhanced CT Image Table 8.1-43 ALWAYS
Softcopy
Table 8.1-44 ALWAYS
Presentation LUT
SOP Common Table 8.1-45 ALWAYS
Private Application Table 8.1-46 Only if private data are present

99
 No. MIICT0057EA

Table 8.1-5
FUNCTIONAL GROUP MACROS OF CREATED ENHANCED CT IMAGE SOP INSTANCES

Functional Group Macro Reference Presence of Macro

Pixel Measures Table 8.1-47 ALWAYS
Frame Content Table 8.1-48 ALWAYS
Plane Position Table 8.1-49 ALWAYS
Plane Orientation Table 8.1-50 ALWAYS
Referenced Image Only if the image or frame has been planned on
Table 8.1-51
another image or frame
Derivation Image Only if the image or frame has been derived from
Table 8.1-52
another SOP Instance
Cardiac Trigger Table 8.1-53 Only if cardiac synchronization was applied
Respiratory Trigger Table 8.1-54 Only if respiratory synchronization was applied
Frame Anatomy Table 8.1-55 ALWAYS
Frame VOI LUT Table 8.1-56 ALWAYS
Contrast/Bolus Usage Table 8.1-57 Only if contrast media was applied
CT Image Frame Type Table 8.1-58 ALWAYS
CT Acquisition Type Only if Image Type (0008,0008) Value 1 is
Table 8.1-59
ORIGINAL
CT Acquisition Details Only if Image Type (0008,0008) Value 1 is
Table 8.1-60
ORIGINAL
CT Table Dynamics Only if Image Type (0008,0008) Value 1 is
Table 8.1-61
ORIGINAL
CT Position Only if Image Type (0008,0008) Value 1 is
Table 8.1-62
ORIGINAL
CT Geometry Only if Image Type (0008,0008) Value 1 is
Table 8.1-63
ORIGINAL
CT Reconstruction Only if Image Type (0008,0008) Value 1 is
Table 8.1-64 ORIGINAL and Acquisition Type (0018,9302) is
other than COSTANT_ANGLE
CT Exposure Only if Image Type (0008,0008) Value 1 is
Table 8.1-65
ORIGINAL
CT X-ray Details Only if Image Type (0008,0008) Value 1 is
Table 8.1-66
ORIGINAL
CT Pixel Value Transformation Table 8.1-67 ALWAYS
Enhanced CT Private Table 8.1-72 ANAP

100
 No. MIICT0057EA

8.1.1.5 Grayscale Softcopy Presentation State IOD

Table 8.1-6
IOD OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Presentation Series Table 8.1-73 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
Presentation Presentation State Table 8.1-74 ALWAYS
State Displayed Area Table 8.1-75 ALWAYS
Spatial Only if Graphic Annotations are to be applied to
Table 8.1-76
Transformation referenced image(s)
Modality LUT Table 8.1-77 ALWAYS
Softcopy VOI LUT Only if a VOI LUT is to be applied to referenced
Table 8.1-78
image(s)
Softcopy
Table 8.1-79 ALWAYS
Presentation LUT
SOP Common Table 8.1-80 ALWAYS
Private Application Table 8.1-81 Only if private data are present

8.1.1.6 Enhanced SR IOD

Table 8.1-7
IOD OF CREATED ENHANCED SR SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series SR Series Table 8.1-82 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
Document SR Document
Table 8.1-83 ALWAYS
General
SR Document
Table 8.1-105 ALWAYS
Content
SOP Common Table 8.1-84 ALWAYS

101
 No. MIICT0057EA

8.1.1.7 X-Ray Radiation Dose SR IOD

Table 8.1-8
IOD OF CREATED X-RAY RADIATION DOSE SR SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series SR Series Table 8.1-82 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
Document SR Document
Table 8.1-83 ALWAYS
General
SR Document
Table 8.1-113 ALWAYS
Content
SOP Common Table 8.1-84 ALWAYS

8.1.1.8 Segmentation IOD

Table 8.1-9
IOD OF CREATED SEGMENTATION SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Segmentation Series Table 8.1-88 ALWAYS
Frame of Frame of Reference
Table 8.1-15 ALWAYS
Reference
Equipment General Equipment Table 8.1-16 ALWAYS
Enhanced General
Table 8.1-89 ALWAYS
Equipment
Segmentation General Image Table 8.1-17 ALWAYS
Image Pixel Table 8.1-90 ALWAYS
Segmentation Image Table 8.1-91 ALWAYS
Multi-frame
Table 8.1-92 ALWAYS
Functional Groups
Multi-frame
Table 8.1-93 ALWAYS
Dimension
SOP Common Table 8.1-94 ALWAYS
Private Application Table 8.1-95 Only if private data are present

102
 No. MIICT0057EA

Table 8.1-10
FUNCTIONAL GROUP MACROS OF CREATED SEGMENTATION SOP INSTANCES

Functional Group Macro Reference Presence of Macro

Pixel Measures Table 8.1-99 ALWAYS
Frame Content Table 8.1-100 ALWAYS
Plane Position Table 8.1-101 ALWAYS
Plane Orientation Table 8.1-102 ALWAYS
Segmentation Table 8.1-103 ALWAYS

8.1.1.9 Common Modules

Table 8.1-11
PATIENT MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
From Modality Worklist or user input.
Values supplied via Modality Worklist MWL/
Patient’s Name (0010,0010) PN VNAP
will be entered as received. USER
Maximum 64 characters.
From Modality Worklist or user input. MWL/
Patient ID (0010,0020) LO VNAP
Maximum 64 characters. USER
MWL/
Patient’s Birth Date (0010,0030) DA From Modality Worklist or user input VNAP
USER
MWL/
Patient’s Sex (0010,0040) CS From Modality Worklist or user input VNAP
USER
From User Input. Maximum 1024
Patient Comments (0010,4000) LT VNAP USER
characters.

103
 No. MIICT0057EA

Table 8.1-12
GENERAL STUDY MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
From Modality Worklist or generated MWL/
Study Instance UID (0020,000D) UI ALWAYS
by device AUTO
Study Date (0008,0020) DA <yyyymmdd> ALWAYS AUTO
Study Time (0008,0030) TM <hhmmss.frac> ALWAYS AUTO
Referring Physician’s
(0008,0090) PN From Modality Worklist VNAP MWL
Name
Requested Procedure ID from MWL/
Study ID (0020,0010) SH VNAP
Worklist or User Input USER
MWL/
Accession Number (0008,0050) SH From Modality Worklist or user input VNAP
USER
Referenced Study
(0008,1110) SQ From Modality Worklist ANAP MWL
Sequence
>Referenced SOP Class
(0008,1150) UI From Modality Worklist ANAP MWL
UID
>Referenced SOP
(0008,1155) UI From Modality Worklist ANAP MWL
Instance UID
Procedure Code
(0008,1032) SQ From Modality Worklist ANAP MWL
Sequence

Table 8.1-13
PATIENT STUDY MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Calculated from DoB input on base
Patient’s Age (0010,1010) AS ALWAYS AUTO
of actual Date

104
 No. MIICT0057EA

Table 8.1-14
GENERAL SERIES MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS “CT” ALWAYS AUTO
Series Instance UID (0020,000E) UI Generated by device ALWAYS AUTO
Series Number (0020,0011) IS Generated by device ALWAYS AUTO
Series Date (0008,0021) DA ANAP AUTO
Series Time (0008,0031) TM ANAP AUTO
Operator field in Study list. Maximum
Operator’s Name (0008,1070) PN VNAP USER
64 characters.
Protocol Name (0018,1030) LO ANAP AUTO
Body Part Examined (0018,0015) CS ANAP USER
Patient Position (0018,5100) CS ALWAYS AUTO
Laterality (0020,0060) CS VNAP AUTO
Request Attributes
(0040,0275) SQ From Modality Worklist ANAP MWL
Sequence
>Requested Procedure ID (0040,1001) SH From Modality Worklist ANAP MWL
>Scheduled Procedure
(0040,0009) SH From Modality Worklist ANAP MWL
Step ID
>Scheduled Procedure
(0040,0007) LO From Modality Worklist ANAP MWL
Step Description
Performed Procedure
(0040,0253) SH Generated by device ANAP AUTO
Step ID
Performed Procedure From Modality Worklist Study
(0040,0254) LO ANAP MWL
Step Description Description(0008,1030)

Table 8.1-15
FRAME OF REFERENCE MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Frame of Reference UID (0020,0052) UI ALWAYS AUTO
Position Reference
(0020,1040) LO VNAP AUTO
Indicator

105
 No. MIICT0057EA

Table 8.1-16
GENERAL EQUIPMENT MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Manufacturer (0008,0070) LO “TOSHIBA” ALWAYS AUTO
Institution Name (0008,0080) LO From Configuration ALWAYS CONFIG
Station Name (0008,1010) SH From Configuration ALWAYS CONFIG
Institution Department
(0008,1040) LO From Configuration VNAP CONFIG
Name
Manufacturer’s Model Aquilion or Asteion or Alexion
(0008,1090) LO ALWAYS AUTO
Name Activion
Device Serial Number (0018,1000) LO From Configuration VNAP CONFIG
Software Version (0018,1020) LO From Configuration VNAP CONFIG

Table 8.1-17
GENERAL IMAGE MODULE OF CREATED SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Instance Number (0020,0013) IS Generated by device ALWAYS AUTO
Patient Orientation (0020,0020) CS VNAP AUTO
Content Date (0008,0023) DA <yyyymmdd> ALWAYS AUTO
Content Time (0008,0033) TM <hhmmss.frac> ALWAYS AUTO
Image Type (0008,0008) CS ALWAYS AUTO
Acquisition Number (0020,0012) IS Generated by device ALWAYS AUTO
Acquisition Date (0008,0022) DA <yyyymmdd> ALWAYS AUTO
Acquisition Time (0008,0032) TM <hhmmss.frac> ALWAYS AUTO
Image in Acquisition (0020,1002) IS VNAP AUTO
From user input. Maximum 44
Image Comments (0020,4000) LT VNAP USER
characters.

106
 No. MIICT0057EA

8.1.1.10 CT Image Modules

Table 8.1-18
IMAGE PLANE MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Spacing (0028,0030) DS ALWAYS AUTO
Image Position (Patient) (0020,0032) DS ALWAYS AUTO
Image Orientation
(0020,0037) DS ALWAYS AUTO
(Patient)
Slice Thickness (0018,0050) DS ALWAYS AUTO
Slice Location (0020,1041) DS ANAP AUTO

Table 8.1-19
IMAGE PIXEL MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Representation (0028,0103) US 1 ALWAYS AUTO
OB
Pixel Data (7FE0,0010) or ALWAYS AUTO
OW

Table 8.1-20
CONTRAST/BOLUS MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Contrast/Bolus Agent (0018,0010) LO VNAP USER
Contrast/Bolus Route (0018,1040) LO ANAP USER
Contrast/Bolus Volume (0018,1041) DS ANAP AUTO
Contrast/Bolus Start
(0018,1042) TM ANAP AUTO
Time
Contrast/Bolus Stop
(0018,1043) TM ANAP AUTO
Time
Contrast/Bolus Total
(0018,1044) DS ANAP AUTO
Dose

Table 8.1-21
VOI/LUT MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
USER or
Window Center (0028,1050) DS ALWAYS
AUTO
USER or
Window Width (0028,1051) DS ALWAYS
AUTO

107
 No. MIICT0057EA

Table 8.1-22
SOP COMMON MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.2” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

108
 No. MIICT0057EA

Table 8.1-23
CT IMAGE MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
“ORIGINAL¥PRIMARY¥LOCALIZ
ER”
“ORIGINAL¥PRIMARY¥AXIAL”
“DERIVED¥SECONDARY”
“DERIVED¥ PRIMARY¥AXIAL”
Image Type (0008,0008) CS ALWAYS AUTO
“DERIVED¥SECONDERY¥AXIAL”
“DERIVED¥SECONDERY¥AXIAL
¥REGISTRATION”
“DERIVED¥SECONDERY¥AXIAL
¥SUBTRACTION”
Samples per Pixel (0028,0002) US 1 ALWAYS AUTO
Photometric
(0028,0004) CS “MONOCHROME2” ALWAYS AUTO
Interpretation
Bits Allocated (0028,0100) US 16 ALWAYS AUTO
Bits Stored (0028,0101) US 16 ALWAYS AUTO
High Bit (0028,0102) US 15 ALWAYS AUTO
Rescale Intercept (0028,1052) DS “0” ALWAYS AUTO
Rescale Slope (0028,1053) DS “1” ALWAYS AUTO
KVP (0018,0060) DS VNAP AUTO
Acquisition Number (0020,0012) IS VNAP AUTO
Scan Options (0018,0022) CS ANAP AUTO
Data Collection
(0018,0090) DS ANAP AUTO
Diameter
Reconstruction Diameter (0018,1100) DS ANAP AUTO
Distance Source to
(0018,1110) DS ANAP AUTO
Detector
Distance Source to
(0018,1111) DS ANAP AUTO
Patient
Gantry/Detector Tilt (0018,1120) DS ANAP AUTO
Table Height (0018,1130) DS ANAP AUTO
Rotation Direction (0018,1140) CS ANAP AUTO
Exposure Time (0018,1150) IS ANAP AUTO
Exposure (0018,1152) IS ANAP AUTO
Filter Type (0018,1160) SH ANAP AUTO
Generator Power (0018,1170) IS ANAP AUTO
Focal Spot(s) (0018,1190) DS ANAP AUTO
Convolution Kernel (0018,1210) SH ANAP AUTO
Respiratory Interval
(0020,9254) FD ANAP AUTO
Time

109
 No. MIICT0057EA

Table 8.1-24
PRIVATE APPLICATION MODULE OF CREATED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac R-R Mean Time (7005,xx03) SH Ex.) “9999.9ms” ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “IMG” ANAP AUTO
Direction (7005,xx0F) SH “HF”, “FF”, etc. ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Position (7005,xx12) SH “SU”, “PR”, etc. ANAP AUTO
Expert Plan No. (7005,xx13) US ANAP AUTO
Reconstruction ROI No. (7005,xx14) US ANAP AUTO
Special Helical ACQ No. (7005,xx15) US ANAP AUTO
Volume UID (7005,xx16) UI ANAP AUTO
Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame No. (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Convolution Kernel for
(7005,xx1B) SH Ex.)“FL99” or “FC99” ANAP AUTO
Series Record
Contrast/Bolus Agent for
(7005,xx1C) LO ANAP AUTO
Series Record
Reconstruction Number (7005,xx1D) UL ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO

110
 No. MIICT0057EA

Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Main Modality in Study (7005,xx30) CS Ex.) “CT” ANAP AUTO
DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO
Volume Vector (7005,xx43) DS ANAP AUTO
Volume Type (7005,xx44) US ANAP AUTO
Relative Table Position
(7005,xx45) DS ANAP AUTO
of 4D Volume
Absolute Table Position
(7005,xx46) DS ANAP AUTO
of 4D Volume
Slice Pitch of 4D Volume (7005,xx47) DS ANAP AUTO
Respiratory Gating Inf. (7005,xx48) LO Ex.) “RG Ph 50%/5000 ms” ANAP AUTO
Respiratory Phase (7005,xx49) SH Ex.) “75%” ANAP AUTO
CTDIw (7005,xx63) FD ANAP AUTO
Volume UID of
(7005,xx67) UI ANAP AUTO
4D-Volume
Total Frame Count in
(7005,xx68) US ANAP AUTO
4D-Volume
Frame Number in
(7005,xx69) US ANAP AUTO
4D-Volume
Image Position of
(7005,xx6a) DS ANAP AUTO
4D-Volume Top
Image Position of
4D-Volume Top (7005,xx6b) DS ANAP AUTO
(Equipment)
SOP Instance UID of
(7005,xx6c) UI ANAP AUTO
4D-Volume
Series Instance UID of
(7005,xx6d) UI ANAP AUTO
4D-Volume
Stitching (7005,xx6e) SH ANAP AUTO
Injector Elapsed Time (7005,xx79) SH ANAP AUTO
Series Instance UID of
(7005,xx7a) UI ANAP AUTO
Shuttle Helical Volume

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

111
 No. MIICT0057EA

8.1.1.11 SC Image Modules

Table 8.1-25
SC EQUIPMENT MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Conversion Type (0028,0064) CS “WSD” ALWAYS AUTO
Modality (0008,0060) CS “CT” ALWAYS AUTO
Secondary Capture
(0018,1010) LO ANAP AUTO
Device ID
Secondary Capture
(0018,1016) LO ANAP AUTO
Device Manufacture
Secondary Capture
Manufacturer’s Model (0018,1018) LO ANAP AUTO
Name
Secondary Capture
(0018,1019) LO ANAP AUTO
Device Software Version

Table 8.1-26
IMAGE PIXEL MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Samples per Pixel (0028,0002) US 1 or 3 ALWAYS AUTO
Photometric
(0028,0004) CS “MONOCHROME2” or “RGB” ALWAYS AUTO
Interpretation
Rows (0028,0010) US ALWAYS AUTO
Columns (0028,0011) US ALWAYS AUTO
Bits Allocated (0028,0100) US 16 or 8 ALWAYS AUTO
Bits Stored (0028,0101) US 16 or 8 ALWAYS AUTO
High Bit (0028,0102) US 15 or 7 ALWAYS AUTO
Pixel Representation (0028,0103) US 0 ALWAYS AUTO
OB
Pixel Data (7FE0,0010) or ALWAYS AUTO
OW
Planar Configuration (0028,0006) US 0 ANAP AUTO

Table 8.1-27
SC IMAGE MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Date of Secondary
(0018,1012) DA ANAP AUTO
Capture
Date of Secondary
(0018,1014) TM ANAP AUTO
Capture

112
 No. MIICT0057EA

Table 8.1-28
VOI/LUT MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
USER or
Window Center (0028,1050) DS ANAP
AUTO
USER or
Window Width (0028,1051) DS ANAP
AUTO

Table 8.1-29
SOP COMMON MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.7” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

Table 8.1-30
PRIVATE APPLICATION MODULE OF CREATED SC IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac R-R Mean Time (7005,xx03) SH Ex.) “9999.9ms” ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
“IMG”, “IMGRGB”, “SCRN”,
File Type Remarks (7005,xx0E) SH ANAP AUTO
“SCRNRBG”
Direction (7005,xx0F) SH “HF”, “FF”, etc. ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Position (7005,xx12) SH “SU”, “PR”, etc. ANAP AUTO
Expert Plan No. (7005,xx13) US ANAP AUTO

113
 No. MIICT0057EA

Volume UID (7005,xx16) UI ANAP AUTO

Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame No. (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Convolution Kernel for
(7005,xx1B) SH Ex.)“FL99” or “FC99” ANAP AUTO
Series Record
Contrast/Bolus Agent for
(7005,xx1C) LO ANAP AUTO
Series Record
Group Key Information. (7005,xx1D) UL ANAP AUTO
Raw-data number (Sort
(7005,xx1E) UL ANAP AUTO
Data)
Volume file Number
(7005,xx1F) LO ANAP AUTO
(Sort Data)
Local Series Number
(7005,xx20) UL ANAP AUTO
(Sort Data)
Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Main Modality in Study (7005,xx30) CS Ex.) “CT” ANAP AUTO
DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

114
 No. MIICT0057EA

8.1.1.12 Standalone Curve Modules

Table 8.1-31
CURVE IDENTIFICATION MODULE OF CREATED STANDALONE CURVE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Curve Number (0020,0024) IS VNAP AUTO
Curve Date (0008,0025) DA ANAP AUTO
Curve Time (0028,0035) TM ANAP AUTO
Referenced Image
(0008,1140) SQ ANAP AUTO
Sequence
>Referenced SOP Class
(0008,1150) UI ANAP AUTO
UID
> Referenced SOP
(0008,1155) UI ANAP AUTO
Instance UID
Referenced Overlay
(0008,1130) SQ ANAP AUTO
Sequence
>Referenced SOP Class
(0008,1150) UI ANAP AUTO
UID
> Referenced SOP
(0008,1155) UI ANAP AUTO
Instance UID
Referenced Curve
(0008,1145) SQ ANAP AUTO
Sequence
>Referenced SOP Class
(0008,1150) UI ANAP AUTO
UID
> Referenced SOP
(0008,1155) UI ANAP AUTO
Instance UID

115
 No. MIICT0057EA

Table 8.1-32
CURVE MODULE OF CREATED STANDALONE CURVE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Curve Dimensions (50xx, 0005) US ALWAYS AUTO
Number of Points (50xx, 0010) US ALWAYS AUTO
Type of Data (50xx, 0020) CS ALWAYS AUTO
Data Value
(50xx, 0103) US ALWAYS AUTO
Representation
OW
Curve Data (50xx, 3000) or ALWAYS AUTO
OB
Curve Description (50xx, 0022) LO ANAP AUTO
Axis Units (50xx, 0030) SH ANAP AUTO
Axis Labels (50xx, 0040) SH ANAP AUTO
Minimum Coordinate
(50xx, 0104) US ANAP AUTO
Value
Maximum Coordinate
(50xx, 0105) US ANAP AUTO
Value
Curve Range (50xx, 0106) SH ANAP AUTO
Curve Data Descriptor (50xx, 0110) US ANAP AUTO
Coordinate Start Value (50xx, 0112) US ANAP AUTO
Coordinate Step Value (50xx, 0114) US ANAP AUTO
Curve Label (50xx, 2500) LO ANAP AUTO
Referenced Overlay
(50xx,2600) SQ ANAP AUTO
Sequence
>Referenced SOP Class
(0008,1150) UI ANAP AUTO
UID
>Referenced SOP
(0008,1155) UI ANAP AUTO
Instance UID
>Referenced Overlay
(50xx, 2610) US ANAP AUTO
Group

Table 8.1-33
SOP COMMON MODULE OF CREATED STANDALONE CURVE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.9” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

116
 No. MIICT0057EA

Table 8.1-34
PRIVATE APPLICATION MODULE OF CREATED STANDALONE CURVE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac R-R Mean Time (7005,xx03) SH Ex.) “9999.9ms” ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “ROI”, “CURVE” ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Volume UID (7005,xx16) UI ANAP AUTO
Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame No. (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Contrast/Bolus Agent for
(7005,xx1C) LO ANAP AUTO
Series Record
Group Key Information. (7005,xx1D) UL ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO
Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Main Modality in Study (7005,xx30) CS Ex.) “CT” ANAP AUTO

117
 No. MIICT0057EA

DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

8.1.1.13 Enhanced CT Image Modules

Table 8.1-35
CT SERIES MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS “CT” ALWAYS AUTO
Referenced Performed
Procedure Step (0008,1111) SQ ANAP
Sequence
>Referenced SOP Class
(0008,1150) UI ANAP
UID
>Referenced SOP
(0008,1155) UI ANAP
Instance UID

Table 8.1-36
IMAGE PIXEL MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Include ‘Image Pixel Macro’ Table 8.1-70

118
 No. MIICT0057EA

Table 8.1-37
ENHANCED CONTRAST/BOLUS MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Contrast/Bolus Agent
(0018,0012) SQ VNAP USER
Sequence
>Include ‘Code Sequence Macro’ Table 8.1-68 Baseline Context ID is 12.
>Contrast/Bolus Agent
(0018,9337) US ANAP AUTO
Number
>Contrast/Bolus
Administration Route (0018,0014) SQ VNAP USER
Sequence
>>Include ‘Code Sequence Macro’ Table 8.1-68 Baseline Context ID is 11.
>Contrast/Bolus
Ingredient Code (0018,9338) SQ EMPTY
Sequence
>>Include ‘Code Sequence Macro’ Table 8.1-68 Baseline Context ID is 13
>Contrast/Bolus Volume (0018,1041) DS VNAP USER
>Contrast/Bolus
(0018,1049) DS VNAP USER
Ingredient Concentration

119
 No. MIICT0057EA

Table 8.1-38
MULTI-FRAME FUNCTIONAL GROUPS MODULE OF CREATED ENHANCED CT IMAGE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Shared Functional
(5200,9229) SQ ALWAYS AUTO
Groups Sequence
>Include ‘Pixel Measures Macro’ Table 8.1-47
>Include ‘Referenced Image Macro’ Table
8.1-51
>Include ‘Derivation Image Macro’ Table 8.1-52
>Include ‘Frame Anatomy Macro’ Table 8.1-55
>Include ‘Frame VOI LUT Macro’ Table 8.1-56
>Include ‘Contrast/Bolus Usage Macro’ Table
8.1-57
>Include ‘CT Image Frame Type Macro’ Table
8.1-58
>Include ‘CT Acquisition Type Macro’ Table
8.1-59
>Include ‘CT Acquisition Details Macro’ Table
8.1-60
>Include ‘CT Table Dynamics Macro’ Table
8.1-61
>Include ‘CT Geometry Macro’ Table 8.1-63
>Include ‘CT Reconstruction Macro’ Table
8.1-64
>Include ‘CT X-ray Details Macro’ Table 8.1-66
>Include ‘CT Pixel Value Transformation Macro’
Table 8.1-67
Per-frame Functional
(5200,9230) SQ ALWAYS AUTO
Groups Sequence
>Include ‘Frame Content Macro’ Table 8.1-48
>Include ‘Plane Position Macro’ Table 8.1-49
>Include ‘Plane Orientation Macro’ Table 8.1-50
>Include ‘Cardiac Trigger Macro’ Table 8.1-53
>Include ‘Respiratory Trigger Macro’ Table
8.1-54
>Include ‘CT Position Macro’ Table 8.1-62
>Include ‘CT Exposure Functional Macro’ Table
8.1-65
>Include ‘Enhanced CT Private Macro’ Table
8.1-72
Instance Number (0020,0013) IS ALWAYS AUTO
Content Date (0008,0023) DA ALWAYS AUTO
Content Time (0008,0033) TM ALWAYS AUTO
Number of Frames (0028,0008) IS ALWAYS AUTO

120
 No. MIICT0057EA

Table 8.1-39
MULTI-FRAME DIMENSION MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Dimension Organization
(0020,9221) SQ ANAP AUTO
Sequence
>Dimension
(0020,9164) UI ANAP AUTO
Organization UID
Dimension Index
(0020,9222) SQ ANAP AUTO
Sequence
>Dimension Index
(0020,9165) AT ANAP AUTO
Pointer
>Functional Group
(0020,9167) AT ANAP AUTO
Pointer
>Dimension
(0020,9164) UI ANAP AUTO
Organization UID

Table 8.1-40
CARDIAC SYNCHRONIZATION MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Cardiac Synchronization
(0018,9037) CS “RETROSPECTIVE” ALWAYS AUTO
Technique
Cardiac Signal Source (0018,9085) CS “ECG” ALWAYS AUTO
Cardiac RR Interval
(0018,9070) FD ALWAYS AUTO
Specified
Cardiac Beat Rejection
(0018,9169) CS “RR_INTERVAL” ALWAYS AUTO
Technique
Low R-R Value (0018,1081) IS EMPTY
High R-R Value (0018,1082) IS EMPTY
Intervals Acquired (0018,1083) IS EMPTY
Intervals Rejected (0018,1084) IS EMPTY

Table 8.1-41
RESPIRATORY SYNCHRONIZATION MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Respiratory Motion
Ex.) “RETRO SPECTIVE”,
Compensation (0018,9170) CS ANAP AUTO
“GATING”
Technique
Respiratory Signal
(0018,9171) CS Ex.) “RESP_MONITOR” ANAP AUTO
Source
Respiratory Trigger
(0020,9256) FD ANAP AUTO
Delay Threshold

121
 No. MIICT0057EA

Table 8.1-42
ACQUISITION CONTEXT MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Acquisition Context
(0040,0555) SQ EMPTY
Sequence

Table 8.1-43
ENHANCED CT IMAGE MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
“ORIGINAL¥PRIMARY¥CARDIAC
”
“ORIGINAL¥PRIMARY¥CARDIAC
_CTA”
“ORIGINAL¥PRIMARY¥CARDIAC
_DYNAMIC”
“ORIGINAL¥PRIMARY¥CARDIAC
_PHASE”
“ORIGINAL¥PRIMARY¥AXIAL”
“ORIGINAL¥PRIMARY¥DYNAMIC
Image Type (0008,0008) CS ” ALWAYS AUTO
“ORIGINAL¥PRIMARY¥PERFUSI
ON”
“ORIGINAL¥PRIMARY¥VOLUME”
“DERIVED¥PRIMARY¥AXIAL”
“DERIVED¥SECONDERY¥AXIAL
¥REGISTRATION”
“DERIVED¥SECONDERY¥SUBT
RACTION”
“DERIVED¥SECONDERY¥SUBT
RACTION_BASE”
Include Common CT/MR Image Description
Macro’ Table 8.1-69
Acquisition Number (0020,0012) IS ALWAYS AUTO
Acquisition Datetime (0008,002A) DT ANAP AUTO
Acquisition Duration (0018,9073) FD VNAP AUTO
Samples per Pixel (0028,0002) US 1 ALWAYS AUTO
Photometric
(0028,0004) CS “MONOCHROME2” ALWAYS AUTO
Interpretation
Bits Allocated (0028,0100) US 16 ALWAYS AUTO
Bits Stored (0028,0101) US 16 ALWAYS AUTO
High Bit (0028,0102) US 15 ALWAYS AUTO
Content Qualification (0018,9004) CS “PRODUCT” ALWAYS AUTO
Image Comments (0020,4000) LT ANAP USER

122
 No. MIICT0057EA

Table 8.1-44
SOFTCOPY PRESENTATION LUT MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Presentation LUT Shape (2050,0020) CS “IDENTIFY” ALWAYS AUTO

Table 8.1-45
SOP COMMON MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.2.1” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

Table 8.1-46
PRIVATE APPLICATION MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “IMG” ANAP AUTO
Direction (7005,xx0F) SH “HF”, “FF”, etc. ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Position (7005,xx12) SH “SU”, “PR”, etc. ANAP AUTO
Expert Plan No. (7005,xx13) US ANAP AUTO
Reconstruction ROI No. (7005,xx14) US ANAP AUTO
Special Helical ACQ No. (7005,xx15) US ANAP AUTO

123
 No. MIICT0057EA

Volume UID (7005,xx16) UI ANAP AUTO

Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Convolution Kernel for
(7005,xx1B) SH Ex.)“FL99” or “FC99” ANAP AUTO
Series Record
Contrast/Bolus Agent for
(7005,xx1C) LO ANAP AUTO
Series Record
Reconstruction Number (7005,xx1D) UL ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO
Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Main Modality in Study (7005,xx30) CS “CT” ANAP AUTO
Scan Range (7005,xx35) DS ANAP AUTO
CT Private Data 3 (7005,xx36) OB ANAP AUTO
Total Frames (7005,xx37) IS ANAP AUTO
Start Frame (7005,xx38) IS ANAP AUTO
End Frame (7005,xx39) IS ANAP AUTO
DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO
Volume Vector (7005,xx43) DS ANAP AUTO
Volume Type (7005,xx44) US ANAP AUTO
Relative Table Position
(7005,xx45) DS ANAP AUTO
of 4D Volume
Absolute Table Position
(7005,xx46) DS ANAP AUTO
of 4D Volume
Slice Pitch of 4D Volume (7005,xx47) DS ANAP AUTO

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

124
 No. MIICT0057EA

Table 8.1-47
PIXEL MEASURES MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Measures
(0028,9110) SQ ALWAYS AUTO
Sequence
>Pixel Spacing (0028,0030) DS ALWAYS AUTO
>Slice Thickness (0018,0050) DS ALWAYS AUTO

Table 8.1-48
FRAME CONTENT MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Frame Content
(0020,9111) SQ ALWAYS AUTO
Sequence
>Frame Reference
(0018,9151) DT ALWAYS AUTO
Datetime
>Frame Acquisition
(0018,9074) DT ALWAYS AUTO
Datetime
>Frame Acquisition
(0018,9220) FD ALWAYS AUTO
Duration
>Dimension Index
(0020,9157) UL ANAP AUTO
Values
>Temporal Position
(0020,9128) UL ANAP AUTO
Index
>Stack ID (0020,9056) SH ANAP AUTO
>In-Stack Position
(0020,9057) UL ANAP AUTO
Number

Table 8.1-49
PLANE POSITION MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Plane Position
(0020,9113) SQ ALWAYS AUTO
Sequence
>Image Position
(0020,0032) DS ALWAYS AUTO
(Patient)

125
 No. MIICT0057EA

Table 8.1-50
PLANE ORIENTATION MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Plane Orientation
(0020,9116) SQ ALWAYS AUTO
Sequence
>Image Orientation
(0020,0037) DS ALWAYS AUTO
(Patient)

Table 8.1-51
REFERENCED IMAGE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Referenced Image
(0008,1140) SQ EMPTY
Sequence

Table 8.1-52
DERIVATION IMAGE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Derivation Image
(0008,9124) SQ EMPTY
Sequence

Table 8.1-53
CARDIAC TRIGGER MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Cardiac Trigger
(0018,9118) SQ ANAP AUTO
Sequence
>Trigger Delay Time (0020,9153) FD ANAP AUTO

Table 8.1-54
RESPIRATORY TRIGGER MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Respiratory Trigger
(0020,9253) SQ ANAP AUTO
Sequence
>Respiratory Interval
(0020,9254) FD ANAP AUTO
Time
>Respiratory Trigger
(0020,9255) FD ANAP AUTO
Delay Time

126
 No. MIICT0057EA

Table 8.1-55
FRAME ANATOMY MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Frame Anatomy
(0020,9071) SQ ALWAYS AUTO
Sequence
>Frame Laterality (0020,9072) CS “U” ALWAYS AUTO
>Include ‘General Anatomy Required Macro’
Table 8.1-71

Table 8.1-56
FRAME VOI LUT MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Frame VOI LUT
(0028,9132) SQ ALWAYS AUTO
Sequence
USER or
>Window Center (0028,1050) DS ALWAYS
AUTO
USER or
>Window Width (0028,1051) DS ALWAYS
AUTO

Table 8.1-57
CONTRAST/BOLUS USAGE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Contrast/Bolus Usage
(0018,9341) SQ ALWAYS AUTO
Sequence
>Contrast/Bolus Agent
(0018,9337) US ALWAYS AUTO
Number
>Contrast/Bolus Agent
(0018,9342) CS “YES” ALWAYS AUTO
Administered
>Contrast/Bolus Agent
(0018,9343) CS VNAP AUTO
Detected
>Contrast/Bolus Agent
(0018,9344) CS VNAP AUTO
Phase

127
 No. MIICT0057EA

Table 8.1-58
CT IMAGE FRAME TYPE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Image Frame Type
(0018,9329) SQ ALWAYS AUTO
Sequence
“ORIGINAL¥PRIMARY¥CARDIAC
”
“ORIGINAL¥PRIMARY¥CARDIAC
_CTA”
“ORIGINAL¥PRIMARY¥CARDIAC
_DYNAMIC”
“ORIGINAL¥PRIMARY¥CARDIAC
_PHASE”
“ORIGINAL¥PRIMARY¥AXIAL”
“ORIGINAL¥PRIMARY¥DYNAMIC
>Frame Type (0008,9007) CS ” ALWAYS AUTO
“ORIGINAL¥PRIMARY¥PERFUSI
ON”
“ORIGINAL¥PRIMARY¥VOLUME”
“DERIVED¥PRIMARY¥AXIAL”
“DERIVED¥SECONDERY¥AXIAL
¥REGISTRATION”
“DERIVED¥SECONDERY¥SUBT
RACTION”
“DERIVED¥SECONDERY¥SUBT
RACTION_BASE”
>Include Common CT/MR Image Description
Macro’ Table 8.1-69

Table 8.1-59
CT ACQUISITION TYPE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Acquisition Type
(0018,9301) SQ ALWAYS AUTO
Sequence
>Acquisition Type (0018,9302) CS ALWAYS AUTO
>Tube Angle (0018,9303) FD ANAP AUTO
>Constant Volume Flag (0018,9333) CS “NO” ALWAYS AUTO
>Fluoroscopy Flag (0018,9334) CS ALWAYS AUTO

128
 No. MIICT0057EA

Table 8.1-60
CT ACQUISITION DETAILS MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Acquisition Details
(0018,9304) SQ ALWAYS AUTO
Sequence
>Rotation Direction (0018,1140) CS “CW”, “CC” ALWAYS AUTO
>Revolution Time (0018,9305) FD ALWAYS AUTO
>Single Collimation
(0018,9306) FD ALWAYS AUTO
Width
>Total Collimation Width (0018,9307) FD ALWAYS AUTO
>Table Height (0018,1130) DS ALWAYS AUTO
>Gantry/Detector Tilt (0018,1120) DS ALWAYS AUTO
>Data Collection
(0018,0090) DS ALWAYS AUTO
Diameter

Table 8.1-61
CT TABLE DYNAMICS MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Table Dynamics
(0018,9308) SQ ALWAYS AUTO
Sequence
>Table Speed (0018,9309) FD ALWAYS AUTO
>Table Feed per
(0018,9310) FD ALWAYS AUTO
Rotation
>Spiral Pitch Factor (0018,9311) FD EMPTY

Table 8.1-62
CT POSITION MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Position Sequence (0018,9326) SQ ALWAYS AUTO
>Table Position (0018,9327) FD ALWAYS AUTO
>Data Collection Center
(0018,9313) FD ALWAYS AUTO
(Patient)
>Reconstruction Target
(0018,9318) FD ALWAYS AUTO
Center (Patient)

Table 8.1-63
CT GEOMETRY MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Geometry Sequence (0018,9312) SQ ALWAYS AUTO
>Distance Source to
(0018,1110) DS Value may not be correct. ALWAYS AUTO
Detector
>Distance Source to
(0018,9335) FD Value may not be correct. ALWAYS AUTO
Data Collection Center

129
 No. MIICT0057EA

Table 8.1-64
CT RECONSTRUCTION MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Reconstruction
(0018,9314) SQ ALWAYS AUTO
Sequence
>Reconstruction
(0018,9315) CS Example “INTERP_99” ALWAYS AUTO
Algorithm
>Convolution Kernel (0018,1210) SH Example “FC99” “FL99” ALWAYS AUTO
>Convolution Kernel
(0018,9316) CS EMPTY
Group
>Reconstruction
(0018,1100) DS ALWAYS AUTO
Diameter
>Reconstruction Pixel
(0018,9322) FD ALWAYS AUTO
Spacing
>Reconstruction Angle (0018,9319) FD EMPTY
>Image Filter (0018,9320) SH ALWAYS AUTO

Table 8.1-65
CT EXPOSURE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT Exposure Sequence (0018,9321) SQ ALWAYS AUTO
>Exposure Time in ms (0018,9328) FD ALWAYS AUTO
>X-ray Tube Current in
(0018,9330) FD ALWAYS AUTO
mA
>Exposure in mAs (0018,9332) FD ALWAYS AUTO
>Exposure Modulation
(0018,9323) CS “NONE” ALWAYS AUTO
Type
>Estimated Dose Saving (0018,9324) FD VNAP AUTO
>CTDIvol (0018,9345) FD VNAP AUTO

130
 No. MIICT0057EA

Table 8.1-66
CT X-RAY DETAILS MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
CT X-ray Details
(0018,9325) SQ ALWAYS AUTO
Sequence
>KVP (0018,0060) DS ALWAYS AUTO
>Focal Spot(s) (0018,1190) DS ALWAYS AUTO
>Filter Type (0018,1160) SH “NONE” ALWAYS AUTO
>Filter Material (0018,7050) CS “COPPER” ALWAYS AUTO

Table 8.1-67
CT PIXEL VALUE TRANSFORMATION MACRO OF CREATED ENHANCED CT IMAGE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Value
Transformation (0028,9145) SQ ALWAYS AUTO
Sequence
>Rescale Intercept (0028,1052) DS ALWAYS AUTO
>Rescale Slope (0028,1053) DS ALWAYS AUTO
>Rescale Type (0028,1054) LO “HU” ALWAYS AUTO

Table 8.1-68
CODE SEQUENCE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Code Value (0008,0100) SH VNAP USER
Coding Scheme
(0008,0102) SH VNAP USER
Designator
Coding Scheme Version (0008,0103) SH VNAP USER

Table 8.1-69
COMMON CT/MR IMAGE DESCRIPTION MACRO OF CREATED ENHANCED CT IMAGE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Presentation (0008,9205) CS “MONOCHROME” ALWAYS AUTO
Volumetric Properties (0008,9206) CS “VOLUME” ALWAYS AUTO
Volume Based
(0008,9207) CS “NONE” ALWAYS AUTO
Calculation Technique

131
 No. MIICT0057EA

Table 8.1-70
IMAGE PIXEL MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Samples per Pixel (0028,0002) US 1 ALWAYS AUTO
Photometric
(0028,0004) CS “MONOCHROME2” ALWAYS AUTO
Interpretation
Rows (0028,0010) US ALWAYS AUTO
Columns (0028,0011) US ALWAYS AUTO
Bits Allocated (0028,0100) US 16 ALWAYS AUTO
Bits Stored (0028,0101) US 16 ALWAYS AUTO
High Bit (0028,0102) US 15 ALWAYS AUTO
Pixel Representation (0028,0103) US 1 ALWAYS AUTO
OB
Pixel Data (7FE0,0010) or ALWAYS AUTO
OW
US
Smallest Image Pixel
(0028,0106) or ANAP AUTO
Value
SS
US
Largest Image Pixel
(0028,0107) or ANAP AUTO
Value
SS

Table 8.1-71
GENERAL ANATOMY REQUIRED MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Anatomic Region
(0008,2218) SQ EMPTY
Sequence

Table 8.1-72
ENHANCED CT PRIVATE MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Enhanced CT Private
(7005,xx28) SQ ANAP AUTO
Sequence
>Frame UID (7005,xx29) UI ANAP AUTO
>Local Frame No. (7005,xx42) US ANAP AUTO
> Stitching (7005,xx6e) SH ANAP AUTO
>Injector Elapsed Time (7005,xx79) SH ANAP AUTO

132
 No. MIICT0057EA

8.1.1.14 Grayscale Softcopy Presentation State Modules

Table 8.1-73
PRESENTATION SERIES MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE
SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS PR ALWAYS AUTO

Table 8.1-74
PRESENTATION STATE MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE
SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Instance Number (0020,0013) IS Generated by device ALWAYS AUTO
Presentation Label (0070,0080) CS Generated by device ALWAYS AUTO
Presentation Description (0070,0081) LO VNAP USER
Presentation Creation
(0070,0082) DA <yyyymmdd> ALWAYS AUTO
Date
Presentation Creation
(0070,0083) TM <hhmmss.frac> ALWAYS AUTO
Time
Presentation Creator’s
(0070,0084) PN VNAP USER
Name
Presentation Series
(0008,1115) SQ ALWAYS AUTO
Sequence
>Series Instance UID (0020,000E) UI ALWAYS AUTO
>Referenced Image
(0008,1140) SQ ALWAYS AUTO
Sequence
>>Referenced SOP
(0008,1150) UI ALWAYS AUTO
Class UID
>>Referenced SOP
(0008,1155) UI ALWAYS AUTO
Instance UID

133
 No. MIICT0057EA

Table 8.1-75
DISPLAYED AREA MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Displayed Area
(0070,005A) SQ ALWAYS AUTO
Selection Sequence
>Referenced Image
(0008,1140) SQ ANAP AUTO
Sequence
>>Referenced SOP
(0008,1150) UI ANAP AUTO
Class UID
>>Referenced SOP
(0008,1155) UI ANAP AUTO
Instance UID
>Displayed Area Top
(0070,0052) SL ALWAYS AUTO
Left Hand Corner
>Displayed Area Bottom
(0070,0053) SL ALWAYS AUTO
Right Hand Corner
>Presentation Size
(0070,0100) CS ALWAYS AUTO
Model
>Presentation Pixel
(0070,0102) IS ALWAYS AUTO
Aspect Ratio
>Presentation Pixel
(0070,0103) FL ANAP AUTO
Magnification Ratio

Table 8.1-76
SPATIAL TRANSFORMATION MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION
STATE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Image Horizontal Flip (0070,0041) CS ALWAYS AUTO
Image Rotation (0070,0042) US ALWAYS AUTO

Table 8.1-77
MODALITY LUT MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Rescale Intercept (0028,1052) DS ANAP AUTO
Rescale Slope (0028,1053) DS ANAP AUTO
Rescale Type (0028,1054) LO ANAP AUTO

134
 No. MIICT0057EA

Table 8.1-78
SOFTCOPY VOI LUT MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Softcopy VOI LUT
(0028,3110) SQ ALWAYS AUTO
Sequence
>Referenced Image
(0008,1140) SQ ALWAYS AUTO
Sequence
>>Referenced SOP
(0008,1150) UI ALWAYS AUTO
Class UID
>>Referenced SOP
(0008,1155) UI ALWAYS AUTO
Instance UID
>Window Center (0028,1050) DS ALWAYS AUTO
>Window Width (0028,1051) DS ALWAYS AUTO
>Window Center &
(0028,1055) LO ANAP AUTO
Width Explanation

Table 8.1-79
SOFTCOPY PRESENTATION LUT MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION
STATE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Presentation LUT Shape (2050,0020) CS ALWAYS AUTO

Table 8.1-80
SOP COMMON MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE SOP
INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character Set (0008,0005) CS Refer to Section 6 ANAP AUTO
Instance Creation Date (0008,0012) DA <yyyymmdd> ANAP AUTO
Instance Creation Time (0008,0013) TM <hhmmss.frac> ANAP AUTO
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.11.1” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

135
 No. MIICT0057EA

Table 8.1-81
PRIVATE APPLICATION MODULE OF CREATED GRAYSCALE SOFTCOPY PRESENTATION STATE
SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac R-R Mean Time (7005,xx03) SH Ex.) “9999.9ms” ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “PGP” ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Position (7005,xx12) SH “SU”, “PR”, etc. ANAP AUTO
Expert Plan No. (7005,xx13) US ANAP AUTO
Reconstruction ROI No. (7005,xx14) US ANAP AUTO
Special Helical ACQ No. (7005,xx15) US ANAP AUTO
Volume UID (7005,xx16) UI ANAP AUTO
Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame No. (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Convolution Kernel for
(7005,xx1B) SH Ex.)“FL99” or “FC99” VNAP AUTO
Series Record
Contrast/Bolus Agent for
(7005,xx1C) LO VNAP AUTO
Series Record
Reconstruction Number (7005,xx1D) UL ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO

136
 No. MIICT0057EA

Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Main Modality in Study (7005,xx30) CS Ex.) “CT” ANAP AUTO
DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

137
 No. MIICT0057EA

8.1.1.15 Enhanced SR Modules

Table 8.1-82
SR SERIES MODULE OF CREATED ENHANCED SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS SR ALWAYS AUTO
Referenced Study Component
(0008,1111) SQ VNAP AUTO
Sequence
Series Instance UID (0020,000E) UI ALWAYS AUTO
Series Number (0020,0011) IS ALWAYS AUTO

Table 8.1-83
SR DOCUMENT GENERAL MODULE OF CREATED ENHANCED SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Content Date (0008,0023) DA ALWAYS AUTO
Content Time (0008,0033) TM ALWAYS AUTO
Instance Number (0020,0013) IS ALWAYS AUTO
Referenced Request Sequence (0040,A370) SQ VNAP AUTO
MWL/
>Accession Number (0008,0050) SH VNAP
USER
>Referenced Study Sequence (0008,1110) SQ VNAP MWL
MWL/
>Study Instance UID (0020,000D) UI VNAP
AUTO
MWL/
>Requested Procedure Description (0032,1060) LO VNAP
USER
>Requested Procedure Code
(0032,1064) SQ VNAP MWL
Sequence
MWL/
>Requested Procedure ID (0040,1001) SH VNAP
USER
>Placer Order Number/Imaging
(0040,2016) LO VNAP MWL
Service Request
>Filler Order Number/Imaging
(0040,2017) LO VNAP MWL
Service Request
Performed Procedure Code
(0040,A372) SQ ALWAYS AUTO
Sequence
Current Requested Procedure
(0040,A375) SQ VNAP AUTO
Evidence Sequence
>Referenced Series Sequence (0008,1115) SQ VNAP AUTO
>>Referenced SOP Sequence (0008,1199) SQ VNAP AUTO
>>>Referenced SOP Class UID (0008,1150) UI VNAP AUTO
>>>Referenced SOP Instance UID (0008,1155) UI VNAP AUTO
>>Series Instance UID (0020,000E) UI ALWAYS AUTO
MWL/
>Study Instance UID (0020,000D) UI VNAP
AUTO
Completion Flag (0040,A491) CS COMPLETE ALWAYS AUTO
Verification Flag (0040,A493) CS UNVERIFIED ALWAYS AUTO

138
 No. MIICT0057EA

Table 8.1-84
SOP COMMON MODULE OF CREATED ENHANCED SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character Set (0008,0005) CS Refer to Section 6 ANAP AUTO
Instance Creation Date (0008,0012) DA <yyyymmdd> ANAP AUTO
Instance Creation Time (0008,0013) TM <hhmmss.frac> ANAP AUTO
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.88.22” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

8.1.1.16 X-Ray Radiation Dose SR Modules

Table 8.1-85
SR SERIES MODULE OF CREATED X-RAY RADIATION DOSE SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS SR ALWAYS AUTO
Referenced Study Component
(0008,1111) SQ VNAP AUTO
Sequence
Series Instance UID (0020,000E) UI ALWAYS AUTO
Series Number (0020,0011) IS ALWAYS AUTO

Table 8.1-86
SR DOCUMENT GENERAL MODULE OF CREATED X-RAY RADIATION DOSE SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Content Date (0008,0023) DA ALWAYS AUTO
Content Time (0008,0033) TM ALWAYS AUTO
Instance Number (0020,0013) IS ALWAYS AUTO
Referenced Request Sequence (0040,A370) SQ VNAP AUTO
MWL/
>Accession Number (0008,0050) SH VNAP
USER
>Referenced Study Sequence (0008,1110) SQ VNAP MWL
MWL/
>Study Instance UID (0020,000D) UI VNAP
AUTO
MWL/
>Requested Procedure Description (0032,1060) LO VNAP
USER
>Requested Procedure Code
(0032,1064) SQ VNAP MWL
Sequence
MWL/
>Requested Procedure ID (0040,1001) SH VNAP
USER
>Placer Order Number/Imaging
(0040,2016) LO VNAP MWL
Service Request
>Filler Order Number/Imaging
(0040,2017) LO VNAP MWL
Service Request
Performed Procedure Code
(0040,A372) SQ ALWAYS AUTO
Sequence

139
 No. MIICT0057EA

Current Requested Procedure

(0040,A375) SQ VNAP AUTO
Evidence Sequence
>Referenced Series Sequence (0008,1115) SQ VNAP AUTO
>>Referenced SOP Sequence (0008,1199) SQ VNAP AUTO
>>>Referenced SOP Class UID (0008,1150) UI VNAP AUTO
>>>Referenced SOP Instance UID (0008,1155) UI VNAP AUTO
>>Series Instance UID (0020,000E) UI ALWAYS AUTO
MWL/
>Study Instance UID (0020,000D) UI VNAP
AUTO
Completion Flag (0040,A491) CS COMPLETE ALWAYS AUTO
Verification Flag (0040,A493) CS UNVERIFIED ALWAYS AUTO

Table 8.1-87
SOP COMMON MODULE OF CREATED X-RAY RADIATION DOSE SR SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character Set (0008,0005) CS Refer to Section 6 ANAP AUTO
Instance Creation Date (0008,0012) DA <yyyymmdd> ANAP AUTO
Instance Creation Time (0008,0013) TM <hhmmss.frac> ANAP AUTO
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.88.67” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

8.1.1.17 Segmentation Modules

Table 8.1-88
SEGMENTATION SERIES MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Modality (0008,0060) CS SEG ALWAYS AUTO
Series Number (0020,0011) IS Generated by device ALWAYS AUTO

Table 8.1-89
ENHANCED GENERAL EQUIPMENT MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Manufacturer (0008,0070) LO “TOSHIBA” ALWAYS AUTO
Manufacturer’s Model Aquilion or Asteion or Alexion
(0008,1090) LO ALWAYS AUTO
Name Activion
Device Serial Number (0018,1000) LO From Configuration VNAP CONFIG
Software Version (0018,1020) LO From Configuration VNAP CONFIG

140
 No. MIICT0057EA

Table 8.1-90
IMAGE PIXEL MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Rows (0028,0010) US ALWAYS AUTO
Columns (0028,0011) US ALWAYS AUTO
OB
Pixel Data (7FE0,0010) or ALWAYS AUTO
OW

Table 8.1-91
SEGMENTATION IMAGE MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Image Type (0008,0008) CS “DERIVED¥PRIMARY” ALWAYS AUTO
Include ‘Content Identification Macro’ Table
8.1-96
Samples per Pixel (0028,0002) US 1 ALWAYS AUTO
Photometric
(0028,0004) CS “MONOCHROME2” ALWAYS AUTO
Interpretation
Bits Allocated (0028,0100) US 1 ALWAYS AUTO
Bits Stored (0028,0101) US 1 ALWAYS AUTO
High Bit (0028,0102) US 0 ALWAYS AUTO
Pixel Representation (0028,0103) US 0 ALWAYS AUTO
Segmentation Type (0062,0001) CS “BINARY” ALWAYS AUTO
Segment Sequence (0062,0002) SQ ALWAYS AUTO
>Include ‘General Anatomy Mandatory Macro’
Table 8.1-97
>Segmented Property
Category Code (0062,0003) SQ ALWAYS AUTO
Sequence
>>Include ‘Code Sequence Macro’ Table 8.1-98 Baseline CID is 7150
>Segment Number (0062,0004) US ALWAYS AUTO
>Segment Label (0062,0005) LO ALWAYS AUTO
>Segment Algorithm
(0062,0008) CS “SEMIAUTOMATIC” ALWAYS AUTO
Type
>Segment Algorithm
(0062,0009) LO “TOSHIBA” ALWAYS AUTO
Name
>Segmented Property
(0062,000F) SQ ALWAYS AUTO
Type Code Sequence
>>Include ‘Code Sequence Macro’ Table 8.1-98 Baseline CID is 7151
Content Label (0070,0080) CS "MODEL" ALWAYS AUTO
Content Description (0070,0081) LO EMPTY AUTO
Content Creator’s Name (0070,0084) PM EMPTY AUTO

141
 No. MIICT0057EA

Table 8.1-92
MULTI-FRAME FUNCTIONAL GROUPS MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Shared Functional
(5200,9229) SQ ALWAYS AUTO
Groups Sequence
>Include ‘Pixel Measures Macro’ Table 8.1-99
>Include ‘Plane Orientation Macro’ Table
8.1-102
Per-frame Functional
(5200,9230) SQ ALWAYS AUTO
Groups Sequence
>Include ‘Frame Content Macro’ Table 8.1-100
>Include ‘Plane Position Macro’ Table 8.1-101
>Include ‘Segmentation Macro’ Table 8.1-103
Content Date (0008,0023) DA ALWAYS AUTO
Content Time (0008,0033) TM ALWAYS AUTO
Number of Frames (0028,0008) IS ALWAYS AUTO

Table 8.1-93
MULTI-FRAME DIMENSION MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Dimension Organization
(0020,9221) SQ ALWAYS AUTO
Sequence
>Dimension
(0020,9164) UI ALWAYS AUTO
Organization UID
Dimension Index
(0020,9222) SQ ALWAYS AUTO
Sequence
>Dimension Index
(0020,9165) AT ALWAYS AUTO
Pointer
>Functional Group
(0020,9167) AT ALWAYS AUTO
Pointer

Table 8.1-94
SOP COMMON MODULE OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.840.10008.5.1.4.1.1.2.1” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

142
 No. MIICT0057EA

Table 8.1-95
PRIVATE APPLICATION MODULE OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “MODEL” ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Volume UID (7005,xx16) UI ANAP AUTO
Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame Number (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO
3D Object File Header (7005,xx6f) OB ANAP AUTO
3D Object Opacity Data (7005,xx70) OB ANAP AUTO
Rows of Captured Image
(7005,xx71) US ANAP AUTO
for 3D Object
Columns of Captured
(7005,xx72) US ANAP AUTO
Image for 3D Object
Allocated Bits of
Captured Image for 3D (7005,xx73) US ANAP AUTO
Object
Stored Bits of Captured
(7005,xx74) US ANAP AUTO
Image for 3D Object
High Bit of Captured
(7005,xx75) US ANAP AUTO
Image for 3D Object
Pixel Representation of
Captured Image for 3D (7005,xx76) US ANAP AUTO
Object
Captured Image for 3D
(7005,xx77) OW ANAP AUTO
Object
Frame Tag List for 3D
(7005,xx78) AT ANAP AUTO
Object

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

143
 No. MIICT0057EA

Table 8.1-96
CONTENT IDENTIFICATION MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Instance Number (0020,0013) IS ALWAYS AUTO
Content Label (0070,0080) CS "MODEL" ALWAYS AUTO
Content Description (0070,0081) LO EMPTY AUTO
Content Creator’s Name (0070,0084) PM EMPTY AUTO

Table 8.1-97
GENERAL ANATOMY MADNATODY MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Anatomic Region
(0008,2218) SQ ALWAYS AUTO
Sequence
>Include ‘Code Sequence Macro’ Table 8.1-98 Baseline CID is 4031

Table 8.1-98
CODE SEQUENCE MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Code Value (0008,0100) SH VNAP USER
Coding Scheme
(0008,0102) SH VNAP USER
Designator
Coding Scheme Version (0008,0103) SH VNAP USER

Table 8.1-99
PIXEL MEASURES MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Pixel Measures
(0028,9110) SQ ALWAYS AUTO
Sequence
>Pixel Spacing (0028,0030) DS ALWAYS AUTO
>Slice Thickness (0018,0050) DS ALWAYS AUTO

Table 8.1-100
FRAME CONTENT MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Frame Content
(0020,9111) SQ ALWAYS AUTO
Sequence
>Dimension Index
(0020,9157) UL ALWAYS AUTO
Values

144
 No. MIICT0057EA

Table 8.1-101
PLANE POSITION MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Plane Position
(0020,9113) SQ ALWAYS AUTO
Sequence
>Image Position
(0020,0032) DS ALWAYS AUTO
(Patient)

Table 8.1-102
PLANE ORIENTATION MACRO OF CREATED ENHANCED CT IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Plane Orientation
(0020,9116) SQ ALWAYS AUTO
Sequence
>Image Orientation
(0020,0037) DS ALWAYS AUTO
(Patient)

Table 8.1-103
SEGMENTATION MACRO OF CREATED SEGMENTATION SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Segment Identification
(0062,000A) SQ ALWAYS AUTO
Sequence
>Referenced Segment
(0062,000B) US ALWAYS AUTO
Number

145
 No. MIICT0057EA

8.1.2 Usage of Attributes from received IOD’s

No SOP Class specific fields are required.

8.1.3 Attribute Mapping

The relationships between attributes received via Modality Worklist, stored in acquired images and
communicated via MPPS are summarized in Table 8.1-104.

Table 8.1-104
ATTRIBUTE MAPPING BETWEEN MODALITY WORKLIST, IMAGE AND MPPS
Modality Worklist Image IOD MPPS IOD

Scheduled Step Attributes

-- --
Sequence
Study Instance UID Study Instance UID >Study Instance UID
Referenced Study Sequence Referenced Study Sequence >Referenced Study Sequence
Accession Number Accession Number >Accession Number
-- Request Attributes Sequence --
Requested Procedure ID >Requested Procedure ID >Requested Procedure ID
Scheduled Procedure Step ID >Scheduled Procedure Step ID >Scheduled Procedure Step ID
Scheduled Procedure Step >Scheduled Procedure Step >Scheduled Procedure Step
Description Description Description
Requested Procedure ID Study ID Study ID
-- Performed Procedure Step ID Performed Procedure Step ID
Performed Procedure Step Performed Procedure Step
--
Description Description
Requested Procedure Code
Procedure Code Sequence Procedure Code Sequence
Sequence

This table shows only typical data sets.

Other data sets are also set as default settings.
All map settings, including the default setting data sets, can be customized.

8.1.4 Coerced/Modified Fields

Not applicable to this product

146
 No. MIICT0057EA

8.1.5 STRUCTURED REPORT DOCUMENT INFORMATIONS

8.1.5.1 Calcium Scoring Report

8.1.5.1.1 Template Structure

CT/MR Cardiovascular Observeation Context Observer Context

Analysis Report
TID 1001 TID 1002
TID 3900

LANGUAGE OF
CONTENT ITEM AND Person observer
DESCENDANTS identifying attributes
TID 1204 TID 1003

Vascular Analysis Calcium Scoring Results

TID 3902 TID 3905

Vascular Section
Measurements
TID 3906
Report Summary
TID 3927

8.1.5.1.2 TID 3900 CT/MR Cardiovascular Analysis Report

Table 8.1-105
CT/MR Cardiovascular Analysis Report
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (122600, DCM,“Cardiovascular 1 ALWAYS
Analysis Report”)
> HAS 1 ALWAYS
SRT,P5-0807F,“cardiova
CONCEPT EV(121058, DCM, "Procedure Reported")
scular CT”
MOD
> HAS 1 ALWAYS
TID 1204 LANGUAGE OF CONTENT
CONCEPT
ITEM AND DESCENDANTS
MOD
> HAS OBS 1 ALWAYS
TID 1001 OBSERVATION CONTEXT
CONTEXT
> CONTAINS TID 3902 Vascular Analysis 1 ALWAYS

147
 No. MIICT0057EA

8.1.5.1.3 TID 1204 LANGUAGE OF CONTENT ITEM AND DESCENDANTS

Table 8.1-106
Language of Content Item and Descendants
NL Rel with VM Presence
Concept Name Value
Parent of Value
1 ALWAYS RFC3066 ,”en”,“English”
HAS
(121049,DCM,”Language of Content Item or
CONCEPT
and Descendants”) RFC3066 ,”ja”,“Japanese
MOD
”
> HAS 1 ALWAYS ISO3166_1,US,”UNITED
CONCEPT (121046,DCM,”Country of Language”) STATES” or
MOD ISO3166_1,JP,”JAPAN”

8.1.5.1.4 TID 1001 OBSERVATION CONTEXT

Table 8.1-107
OBSERVATION CONTEXT
NL Rel with VM Presence
Concept Name Value
Parent of Value
HAS 1 ALWAYS
CONCEPT DTID (1002) “Observer Context”
MOD

8.1.5.1.5 TID 1002 OBSERVER CONTEXT

Table 8.1-108
OBSERVER CONTEXT
NL Rel with VM Presence
Concept Name Value
Parent of Value
HAS OBS DTID (1003) Person observer identifying 1 USER
CONTEXT attributes

8.1.5.1.6 TID 1003 PERSON OBSERVER IDENTIFYING ATTRIBUTES

Table 8.1-109
PERSON OBSERVER IDENTIFYING ATTRIBUTES
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (121008,DCM, “Person Observer 1 USER
Name”)

148
 No. MIICT0057EA

8.1.5.1.7 TID 3902 Vascular Analysis

Table 8.1-110
Vascular Analysis
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (121070, DCM,"Findings") 1 ALWAYS
> 1 ALWAYS EV(122605, DCM,
HAS
"Vascular
CONCEPT EV(111004, DCM,"Analysis Performed")
Morphological
MOD
Analysis")
> CONTAINS TID 3905 Calcium Scoring Results 1 ALWAYS
> CONTAINS TID 3906 Vascular Section Measurements 1-n

8.1.5.1.8 TID 3905 Calcium Scoring Results

Table 8.1-111
Calcium Scoring Results
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (121070, DCM,"Findings") 1 ALWAYS
> 1 ALWAYS EV(122603, DCM,
CONTAINS EV(111004, DCM,"Analysis Performed") "Calcium Scoring
Analysis")
> EV(122657, DCM,"Agatston Score 1 ALWAYS
CONTAINS AUTO
Threshold")
> CONTAINS EV(112058, DCM,"Calcium Score") 1 ALWAYS AUTO
>> HAS 1 ALWAYS
EV(112055, DCM, "Agatston Scoring
CONCEPT AUTO
Method")
MOD
>> HAS 1 ALWAYS
EV(R-00317,SRT, ”Mean Value of
PROPERTI AUTO
population”)
ES
>> HAS 1 ALWAYS
EV(121414,DCM, ” Standard deviation of
PROPERTI AUTO
population”)
ES
> CONTAINS EV(122660, DCM,"Calcium Volume") 1 ALWAYS AUTO
> CONTAINS EV(F-02A3B, SRT,"Number of Lesions") 1 ALWAYS AUTO
> EV(99TOST0001-0001, 1
CONTAINS AUTO
99TOSHIBA-TMSC,"Pixel Threshold ")

149
 No. MIICT0057EA

8.1.5.1.9 TID 3906 Vascular Section Measurements

Table 8.1-112
Vascular Section Measurements
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (T-43000, SRT," Coronary Artery 1-n ALWAYS
CONTAINS
Structure ")
> CONTAINS EV (121070, DCM,"Findings") 1 ALWAYS
>> 1 ALWAYS AUTO
HAS CID 3014 Coronary
CONCEPT EV(G-C0E3, SRT, "Finding Site") Artery Segments
MOD CID 3015 Coronary
Arteries
>> CONTAINS TID 3905 Calcium Scoring Results 1 ALWAYS

150
 No. MIICT0057EA

8.1.5.2 CT Radiation Dose Report

8.1.5.2.1 Template Structure

CT Radiation Dose Observer Context Device observer

identifying attributes
TID 10011 TID 1002
TID 1004

CT Accumulated Dose
Data
TID 10012

CT Irradiation Event Data

TID 10013

8.1.5.2.2 TID 10011 CT RADIATION DOSE

Table 8.1-113
CT RADIATION DOSE
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (113701, DCM, “Xray Radiation Dose 1 ALWAYS
AUTO
Report”)
> 1 ALWAYS EV
HAS
(P5-08000,SRT,“Comp
CONCEPT EV (121058, DCM,”Procedure reported”)
uted Tomography
MOD
Xray”)
>> HAS 1 ALWAYS EV
CONCEPT EV (G-C0E8, SRT,“Has Intent”) (R-408C3,SRT,“Diagno
MOD stic Intent”)
> TID 1002 OBSERVER CONTEXT 1 ALWAYS
> HAS OBS EV (113809, DCM,“Start of X-ray 1 ALWAYS
AUTO
CONTEXT Irradiation”)
> HAS OBS EV (113810, DCM,“End of X-ray 1 ALWAYS
AUTO
CONTEXT Irradiation”)
> HAS OBS EV (113705, DCM,“Scope of 1 ALWAYS EV
CONTEXT Accumulation”) (113014,DCM,“Study”)
>> HAS 1 ALWAYS
PROPERTI EV (110180, DCM,“Study Instance UID”) AUTO
ES
> TID 10012 CT ACCUMULATED DOSE 1 ALWAYS
CONTAINS
DATA
> TID 10013 CT IRRADIATION EVENT 1-n ALWAYS
CONTAINS
DATA

151
 No. MIICT0057EA

> 1 ALWAYS EV
EV (113854, DCM,“Source of Dose
CONTAINS (113856,DCM,“Automat
Information”)
ed Data Collection”)
> EV (99TOST000A-0001, 1 ALWAYS
CONTAINS 99TOSHIBA-TMSC,“Patient Body
Parameters”)
>> EV (99TOST000A-0002, 1 ANAP
CONTAINS 99TOSHIBA-TMSC,“Mean Body AUTO
Thickness”)
>> EV (99TOST000A-0003, 1 ANAP
CONTAINS 99TOSHIBA-TMSC,“Maximum Body AUTO
Thickness”)
>> EV (99TOST000A-0004, 1 ANAP
CONTAINS 99TOSHIBA-TMSC,“Minimum Body AUTO
Thickness”)
>> EV (99TOST000A-0005, 1 ALWAYS
CONTAINS 99TOSHIBA-TMSC,“Total Number of AUTO
Images”)
>> EV (99TOST000A-0006, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“Contrast Enhance”)

8.1.5.2.3 TID 1002 OBSERVER CONTEXT

Table 8.1-114
OBSERVER CONTEXT
NL Rel with VM Presence
Concept Name Value
Parent of Value
HAS OBS 1 ALWAYS
EV (121005,DCM, “Observer Type”) 121007,DCM, “Device”
CONTEXT
TID (1004) Device observer identifying 1 ALWAYS
attributes

8.1.5.2.4 TID 1004 DEVICE OBSERVER IDENTIFYING ATTRIBUTES

Table 8.1-115
DEVICE OBSERVER IDENTIFYING ATTRIBUTES
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (121012,DCM, “Device Observer UID”) 1 ALWAYS

8.1.5.2.5 TID 10012 CT ACCUMULATED DOSE DATA

Table 8.1-116
CT ACCUMULATED DOSE DATA
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (113811, DCM,”CT Accumulated Dose 1 ALWAYS
CONTAINS AUTO
Data”)
> EV (113812, DCM,“Total Number of 1 ALWAYS
CONTAINS AUTO
Irradiation Events”)
> EV (113813, DCM,“CT Dose Length 1 ALWAYS AUTO
CONTAINS
Product Total”)

152
 No. MIICT0057EA

8.1.5.2.6 TID 10013 CT IRRADIATION EVENT DATA

Table 8.1-117
CT IRRADIATION EVENT DATA
NL Rel with VM Presence
Concept Name Value
Parent of Value
EV (113819, DCM, ”CT Acquisition”) 1 ALWAYS AUTO
> 1 ALWAYS AUTO
CONTAINS EV (123014 , DCM,”Target Region”) CID 4030 CT and MR
Anatomy Imaged
> 1 ALWAYS AUTO
CONTAINS EV (113820, DCM, “CT Acquisition Type”) CID 10013 CT
Acquisition Types
> １ ALWAYS AUTO
CONTAINS EV(G-C23C, SRT,“Procedure Context”) CID 10014 Contrast
Imaging Technique
> CONTAINS EV (113769, DCM,“Irradiation Event UID”) 1 ALWAYS AUTO
> EV (113822, DCM, “CT Acquisition 1 ALWAYS
CONTAINS AUTO
Parameters”)
>> CONTAINS EV (113824, DCM,“Exposure Time”) 1 ALWAYS AUTO
>> CONTAINS EV (113825, DCM,“Scanning Length”) 1 ALWAYS AUTO
>> EV (113826, DCM,“Nominal Single 1 ALWAYS
CONTAINS AUTO
Collimation Width”)
>> EV (113827, DCM,“Nominal Total 1 ALWAYS
CONTAINS AUTO
Collimation Width”)
>> CONTAINS EV (113828, DCM,“Pitch Factor”) 1 ANAP AUTO
>> EV (113823, DCM,“Number of X-ray 1 ALWAYS AUTO
CONTAINS
Sources”) 1 or 2
>> EV (113831, DCM, “CT X-ray Source 1 or 2 ALWAYS
CONTAINS AUTO
Parameters”)
>> EV (113832, DCM,“Identification Number 1 ALWAYS
CONTAINS AUTO
> of the X-ray Source”)
>> 1 ALWAYS
CONTAINS EV (113733, DCM,“KVP”) AUTO
>
>> EV (113833, DCM,“Maximum X-ray Tube 1 ALWAYS
CONTAINS AUTO
> Current”)
>> 1 ALWAYS
CONTAINS EV (113734, DCM,“X-Ray TubeCurrent”) AUTO
>
>> EV (113834, DCM,“Exposure Time per 1 ANAP
CONTAINS AUTO
> Rotation”)
> CONTAINS EV (113829, DCM, “CT Dose”) 1 ANAP AUTO
>> CONTAINS EV (113830, DCM,“Mean CTDIvol ”) 1 ALWAYS AUTO

153
 No. MIICT0057EA

>> 1 ALWAYS AUTO

EV (113690,DCM,”IEC
Head Dosimetry
EV (113835, DCM,“CTDIw Phantom Phantom”)
CONTAINS
Type”) Or
EV (113691, DCM,“IEC
Body Dosimetry
Phantom”)
>> CONTAINS EV (113838, DCM,“DLP”) 1 ALWAYS AUTO
> EV (113842, DCM, “X-ray Modulation 1 ALWAYS
CONTAINS AUTO
Type”)
> EV (99TOST000B-0001, 1 ANAP
CONTAINS 99TOSHIBA-TMSC,“Dose Reduce AUTO
Parameters”)
>> EV (99TOST000B-0002, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“Modulation”)
>> EV (121414, DCM,“Standard deviation of 1 ANAP
CONTAINS AUTO
population”)
>> EV (99TOST000B-0003, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“Boost”)
>> EV (99TOST000B-0004, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“QDS”)
>> EV (99TOST000B-0005, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“Dose Reduce Mode”)
>> EV (99TOST000B-0006, 1 ANAP
CONTAINS AUTO
99TOSHIBA-TMSC,“Dose Reduce Ratio”)

154
 No. MIICT0057EA

8.2 DATA DICTIONARY OF PRIVATE ATTRIBUTES

This product reserves private attribute values in the group 7005 and 7007.
The private attributes added to created SOP instances or directory records are listed in the following table;
Table 8.2-1
DATA DICTIONARY OF PRIVATE ATTRIBUTES
Tag Attribute Name VR VM
(7005,00xx) Private Creator Code LO 1
(7005,xx00) CT Private Data 1 OB 1-n
(7005,xx03) Cardiac R-R Mean Time SH 1
(7005,xx04) Cardiac Reconstruction Gating Phase in Percent SH 1
(7005,xx05) Cardiac Reconstruction Gating Phase in ms SH 1
(7005,xx06) Cardiac Reconstruction Mode SH 1
(7005,xx07) Reconstruction Center DS 1-n
(7005,xx08) Detector Slice Thickness in mm DS 1
(7005,xx09) Number of Detector rows to Reconstruct LO 1
(7005,xx0A) Table Speed in mm/rot DS 1
(7005,xx0B) Filter SH 1
(7005,xx0C) Reconstruction Correction Type SH 1
(7005,xx0D) Organ CS 1
(7005,xx0E) File Type Remarks SH 1
(7005,xx0F) Direction SH 1
(7005,xx10) CT Private Data 2 OB 1-n
(7005,xx11) Series Comment LT 1
(7005,xx12) Position SH 1
(7005,xx13) Expert Plan No. US 1
(7005,xx14) Reconstruction ROI No. US 1
(7005,xx15) Special Helical ACQ No. US 1
(7005,xx16) Volume UID UI 1
(7005,xx17) Total Frame Count in the Volume US 1
(7005,xx18) Frame No. US 1
(7005,xx19) Frame Sort Key UL 1
(7005,xx1A) Frame Sort Order US 1
(7005,xx1B) Convolution Kernel SH 1
(7005,xx1C) Contrast/Bolus Agent LO 1
(7005,xx1D) Reconstruction Number UL 1
(7005,xx1E) Raw Data Number UL 1
(7005,xx1F) Volume Number LO 1
(7005,xx20) Local Series Number UL 1
(7005,xx21) Decrease in Artifact Filter LO 1
(7005,xx22) Reconstruction Interval DS 1
(7005,xx23) Pitch Factor DS 1
(7005,xx24) The Acquisition Date of NRA DA 1
(7005,xx25) Large Data File Attribute UL 1

155
 No. MIICT0057EA

(7005,xx26) Large Data File Name CS 1-8

(7005,xx28) Enhanced CT Private Sequence SQ 1
(7005,xx29) Frame UID UI 1
(7005,xx30) Main Modality in Study CS 1
(7005,xx35) Scan Range DS 2
(7005,xx36) CT Private Data 3 OB 1-n
(7005,xx37) Total Frames IS 1
(7005,xx38) Start Frame IS 1
(7005,xx39) End Frame IS 1
(7005,xx40) DLP（Dose Length Product） FD 1
(7005,xx41) Raw Slice Information SH 1
(7005,xx42) Local Frame No US 1
(7005,xx43) Volume Vector DS 3
(7005,xx44) Volume Type US 1
(7005,xx45) Relative Table Position of 4D Volume DS 1
(7005,xx46) Absolute Table Position of 4D Volume DS 1
(7005,xx47) Slice Pitch of 4D Volume DS 1
(7005,xx48) Respiratory Gating Inf. LO 1
(7005,xx49) Respiration Phase SH 1
(7005,xx61) Synchronized Signal Information LO 1
(7005,xx62) Total Raw Data Size DS 1
(7005,xx63) CTDIw FD 1
(7005,xx67) Volume UID of 4D-Volume UI 1
(7005,xx68) Total Frame Count in 4D-Volume US 1
(7005,xx69) Frame Number in 4D-Volume US 1
(7005,xx6a) Image Position of 4D-Volume Top DS 3
(7005,xx6b) Image Position of 4D-Volume Top (Equipment) DS 3
(7005,xx6c) SOP Instance UID of 4D-Volume UI 1
(7005,xx6d) Series Instance UID of 4D-Volume UI 1
(7005,xx6e) Stitching SH 1
(7005,xx6f) 3D Object File Header OB 1-n
(7005,xx70) 3D Object Opacity Data OB 1-n
(7005,xx71) Rows of Captured Image for 3D Object US 1
(7005,xx72) Columns of Captured Image for 3D Object US 1
(7005,xx73) Allocated Bits of Captured Image for 3D Object US 1
(7005,xx74) Stored Bits of Captured Image for 3D Object US 1
(7005,xx75) High Bit of Captured Image for 3D Object US 1
(7005,xx76) Pixel Representation of Captured Image for 3D Object US 1
(7005,xx77) Captured Image for 3D Object OW 1-n
(7005,xx78) Frame Tag List for 3D Object AT 1-n
(7005,xx79) Injector Elapsed Time SH 1
(7005,xx7a) Series Instance UID of Shuttle Helical Volume UI 1
(7005,xxF1) Protect Mark for Image, Curve or Private Record CS 1

156
 No. MIICT0057EA

(7005,xxF2) Protect Mark for Series Record CS 1

(7005,xxF3) Protect Mark for Study Record CS 1
(7007,00xx) Private Creator Code LO 1

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

8.3 CONTROLLED TERMINOLOGY AND TEMPLATES

Not applicable to this product

8.4 GRAYSCALE IMAGE CONSISTENCY

Not applicable to this product

157
 No. MIICT0057EA

8.5 STANDARD EXTENDED/SPECIALIZED/PRIVATE SOP CLASSES

8.5.1 Standard Extended SOP Class - CT Image Storage

The Storage SCU AE and the Offline-Media AE are making the following extensions to DICOM SOP Classes:
SOP Class : CT Image Storage
Attribute : Respiratory Interval Time (0020,9254)

158
 No. MIICT0057EA

8.5.2 Private SOP Class - Toshiba CT Non-Image Storage

Table 8.5-1 specifies the attributes of a Toshiba CT Non-Image exported or added by the PRI-TSB-CT-CD
AP or the PRI-TSB-DVD-RAM AP.
Table 8.5-1
IOD OF CREATED TOSHIBA CT NON-IMAGE SOP INSTANCES

IE Module Reference Presence of Module

Patient Patient Table 8.1-11 ALWAYS
Study General Study Table 8.1-12 ALWAYS
Patient Study Table 8.1-13 Only if “Patient’s Age” is present
Series General Series Table 8.1-14 ALWAYS
Equipment General Equipment Table 8.1-16 ALWAYS
Private Toshiba CT
Table 8.5-2 ALWAYS
Non-Image
SOP Common Table 8.5-3 ALWAYS
Private Application Table 8.5-4 Only if private data are present

Table 8.5-2
TOSHIBA CT NON-IMAGE MODULE OF CREATED TOSHIBA CT NON-IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Toshiba CT Non-Image
(7FE0,0010) OB ALWAYS AUTO
Data

Table 8.5-3
SOP COMMON MODULE OF CREATED TOSHIBA CT NON-IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Specific Character set (0008,0005) CS Refer to Section 6 ANAP CONFIG
SOP Class UID (0008,0016) UI “1.2.392.200036.9116.2.6.1.1” ALWAYS AUTO
SOP Instance UID (0008,0018) UI Generated by device ALWAYS AUTO

159
 No. MIICT0057EA

Table 8.5-4
PRIVATE APPLICATION MODULE OF CREATED TOSHIBA CT NON-IMAGE SOP INSTANCES
Presence
Attribute Name Tag VR Value Source
of Value
Private Creator Code (7005,00xx) LO “TOSHIBA_MEC_CT3” ANAP AUTO
CT Private Data 1 (7005,xx00) OB ANAP AUTO
Cardiac R-R Mean Time (7005,xx03) SH Ex.) “9999.9ms” ANAP AUTO
Cardiac Reconstruction
(7005,xx04) SH Ex.) “99%” ANAP AUTO
Getting Phase in Percent
Cardiac Reconstruction
(7005,xx05) SH Ex.) “999ms” ANAP AUTO
Getting Phase in ms
Cardiac Reconstruction
(7005,xx06) SH “HALF”, “SEGMENT” ANAP AUTO
Mode
Reconstruction Center (7005,xx07) DS ANAP AUTO
Detector Slice Thickness
(7005,xx08) DS Ex.)”+9999.99” ANAP AUTO
in mm
Ex.) “0000111111110000” or
Number of Detector “FFFF”
(7005,xx09) LO ANAP AUTO
rows to Reconstruct 8 detectors were used to
reconstruct image
Table Speed in mm/rot (7005,xx0A) DS Ex.)”+99.99” ANAP AUTO
Filter (7005,xx0B) SH Ex.)”ORG “ ANAP AUTO
Reconstruction
(7005,xx0C) SH ANAP AUTO
Correction Type
Organ (7005,xx0D) CS Typical organ in the Study. ANAP AUTO
File Type Remarks (7005,xx0E) SH “CBPINF”, etc. ANAP AUTO
Direction (7005,xx0F) SH “HF”, “FF”, etc. ANAP AUTO
CT Private Data 2 (7005,xx10) OB ANAP AUTO
Series Comment (7005,xx11) LT ANAP AUTO
Position (7005,xx12) SH “SU”, “PR”, etc. ANAP AUTO
Expert Plan No. (7005,xx13) US ANAP AUTO
Reconstruction ROI No. (7005,xx14) US ANAP AUTO
Special Helical ACQ No. (7005,xx15) US ANAP AUTO
Volume UID (7005,xx16) UI ANAP AUTO
Total Frame Count in the
(7005,xx17) US ANAP AUTO
Volume
Frame No. (7005,xx18) US ANAP AUTO
Frame Sort Key (7005,xx19) UL ANAP AUTO
Frame Sort Order (7005,xx1A) US ANAP AUTO
Convolution Kernel for (7005,xx1B)
SH Ex.)“FL99” or “FC99” ANAP AUTO
Series Record
Contrast/Bolus Agent for (7005,xx1C)
LO ANAP AUTO
Series Record
Reconstruction Number (7005,xx1D) UL ANAP AUTO
Raw Data Number (7005,xx1E) UL ANAP AUTO
Volume Number (7005,xx1F) LO ANAP AUTO
Local Series Number (7005,xx20) UL ANAP AUTO

160
 No. MIICT0057EA

Decrease in Artifact
(7005,xx21) LO Ex.) “RASP”, “BOOST” ANAP AUTO
Filter
Reconstruction Interval (7005,xx22) DS Ex.) “7.00” ANAP AUTO
Pitch Factor (7005,xx23) DS Ex.) “0.641” ANAP AUTO
The Acquisition Date of
(7005,xx24) DA Ex.) ”20051121” ANAP AUTO
NRA
Large Data File Attribute (7005,xx25) UL ANAP AUTO
Large Data File Name (7005,xx26) CS ANAP AUTO
Main Modality in Study (7005,xx30) CS Ex.) “CT” ANAP AUTO
Scan Range (7005,xx35) DS ANAP AUTO
CT Private Data 3 (7005,xx36) OB ANAP AUTO
Total Frames (7005,xx37) IS ANAP AUTO
Start Frame (7005,xx38) IS ANAP AUTO
End Frame (7005,xx39) IS ANAP AUTO
DLP（Dose Length
(7005,xx40) FD ANAP AUTO
Product）
Row Slice Information (7005,xx41) SH Ex.) “0.5x64”, “10.0x2”, “1.0x1” ANAP AUTO

NOTE: CT Private Data 1 (7005,xx00) or CT Private Data 2 (7005,xx10) may contain some patient
information.

161
 No. MIICT0057EA

8.6 PRIVATE TRANSFER SYNTAXES

Not applicable to this product

E
162