Scribd
Upload
190 views2 pages

1.-SEMIKRON DataSheet RT380M

This document summarizes a thyristor trigger module model RT380MU B2C that can control the power delivered to loads connected to 230/400VAC supplies. It can trigger up to 4 thyristors in a B2C configuration or 2 thyristors with a variable delay over the mains voltage zero crossing to regulate the power to the load. The triggering signal can be a 0-5V or 0-10V control voltage and it is suitable for applications like illumination control, oven temperature control, motor speed control, and more.

Uploaded by

valeria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
190 views2 pages

1.-SEMIKRON DataSheet RT380M

This document summarizes a thyristor trigger module model RT380MU B2C that can control the power delivered to loads connected to 230/400VAC supplies. It can trigger up to 4 thyristors in a B2C configuration or 2 thyristors with a variable delay over the mains voltage zero crossing to regulate the power to the load. The triggering signal can be a 0-5V or 0-10V control voltage and it is suitable for applications like illumination control, oven temperature control, motor speed control, and more.

Uploaded by

valeria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

THYRISTOR TRIGGER MODULES

RT380M B2C
PHASE ANGLE THYRISTOR REGULATOR

- 230ac or 400Vac supply


- Perfect operation with inductive loads
- Control voltage selectable 0-5/0-10 V.
- Auxiliary 5V supply for the control voltage
- 4.000 V galvanic insulation
- Triggers the whole range of SEMIKRON thyristors
- No external components required.
- Works with 50 Hz and 60 Hz

The model RT380MU B2C is designed to trigger 4 thyristors in B2C configuration, and can also be used
with only 2 thyristors, with a variable delay over the zero crossing of the mains alternating voltage.
In this way, the power allowed through to the load by the thyristors is regulated.

The load may be supplied with a variable alternating voltage if both thyristors are connected in anti-
parallel, or with a variable DC-Voltage if both are connected in a controlled- or semi-controlled rectifier
assembly.

The triggering signal could be a 0-5 V or 0-10 V from a external DC power supply. The user can also use
a 10 kOhm potentiometer connected between 5Vout, 0 V and 5 V in pins.

This regulator is suitable for a wide range of possible applications, among which are:
Illumination control, electric ovens temperature control, d.c. motor speed control, starting and control of
induction motor speeds, galvanising bath control, electrolytic process control.

ELECTRICAL SPECIFICATIONS:

Supply voltage 230/400 VAC, +10% / -15%


Maximum power drain 3W
Triggering current 300 mA @ Vgk=5V
Control voltages 0-5V Rin=5k?
0-10V Rin=10k?
Auxiliary output voltage 5V Imax=100 mA
Insulation 4.000 Vca inlet/outlet
Supply frequency 47-63Hz
Operating temperature range 0-50ºC
Connection type Fast connection, no screws needed
Mounting holes for M4 screws
Weight 0.24kg
Conforms to VDE standards.

7/03/07
2
! !" #$ % ! &
' ( '' ) " ' * ! + ! ,' $ % * % &
! ' ! %' - ! * % ' &

Escala Material Denominación Código Rev.

. 01 2 345 6 70 8
Tolerancia Acabado Artículo Dibujado Revisado Fecha
Entre Centros: 0.25
Métrica: 0.5 / 4 6 6

You might also like