ASME B36.10M-2004 eC EC CLT) Welded and Seamless Wrought Steel Pipe AN AMERICAN NATIONAL STANDARD Xs) The American Society of PEM aCH pes AN AMERICAN NATIONAL STANDARD WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME BS6.10M-2004 (Revision of ASME B36.10M-2000)Date of tsuance: October 25, 2004, ‘This Standard will be revised when the Society approves the issuance of a new edition. There will be no addenda or writen interpretations of the requirements ofthis Standard issued to this edition, ASME isthe registered trademark ofthe American Sacety of Mechanical Engineers ‘his code or standard wes developed under procedures accredited a meeting the citeia for American National Standards he Consensus Committee that approved the code or standard was balanced to assure that indhvduals from Competent and concerned interests have had an opportunity to parteipate. The proposed code or standard was made aalable for public review and comment that provides an opportunity for addtional public input rom indus, academia, regulatory agencies, and the publiat large, ISIE does not “approve,” "ate." of “endorse” any Kem, construction, proprietary device, or activity. ASME does ot take ary position with respect tothe validity of any patent rights asserted in conmection with any items mentioned inthis document, and does not undertake to insure anyone tiling a standard against ability for iningement of any applicable leters patent nor assume any sch Habilty Users of a code or standard are expressly advised thatthe determination of the validly of any such patent rights, andthe sk oF infingement of such rights 1s tntizly their own responsbiy Participation by federal agency representatives) or persons) afllated wth indus is not to be interpreted as overment or industy endorsement of this code or standard "ASME accepts responsibilty for ony those Interpretations ofthis document issued in accordance with he established ASME procedures and polices, which precludes the issuance of interpretations by Indlduals. No part of this document may be reproduced in any form, in an electtonic rival system or otherwise, ‘thou the plo wlten emission of the publisher The American Society of Mechanica Engineers Tee Park Avenue, New York, HY 10016-5990 Copyright © 2008 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS ‘AM ights reserved Printed in USA oni ©2004 bythe Amarin Soy oF Mechanics GS ‘No reproduction miy be made of this material without writen consent of ASME.CONTENTS Foreword Committee Roster 1 Scope Size Materials Wall Thickness Weights Permissible Variations Pipe Threads Wall Thickness Designations Wall Thickness Selection Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe “Copyright © 2008 by the American Society of Mechanical Engineers [No eproduction may be made ofthis matenal without written consent of ASME ECFOREWORD In March 1927, the American Standards Association authorized the organization of a Sectional Committee on Standardization of Dimensions and Material of Wrought Steel and Wrought Iron Pipe and Tubing for the purpose of unifying the standards of these commodities in force in this country. The American Society for Testing and Materials and The American Society of Mechanical Engineers were designated as sponsors, and the first meeting of the Sectional Committee was held in Pittsburgh, Pennsylvania, on May 18, 1928. The dimensions of commercial pipe in general use in the United States at the time conformed. rather generally to those recommended by the ASME Committee on Standard Pipe and Pipe ‘Threads published in 1886 (ASME Transactions, Vol. VIN, p.29). On these standards an enormous industry has been built and the satisfactory use of this product proves the soundness of the original design and specification. Increasingly severe service demands at the time of the Committee's organization had been met by using the nearest available pipe or tubing for heavier sections such as casing, mechanical tubing, ete, with resulting uneconomical multiplicity of wall thicknesses. ‘Subsequently, the Committee, with the cooperation of the industry, made a survey of existing practice as the logical starting point for the development of an American Standard. From this Survey, a table was designed to provide a selection of wall thicknesses of pipe to cover the power piping requirements of industry where strength to resist internal pressure governs selection and ‘was later expanded to include pipe diameters and thicknesses used in other industries. The original intent of the Committee was to establish a system of Schedule Numbers for pipe size/ wall thickness combinations which would have an approximately uniform relationship equal to 1000 times the P/S expression contained in the modified Barlow formula for pipe wall thickness {as defined in the Appendix to this standard. The resulting Numbers departed so far from existing, wall thicknesses in common use that the original intent could not be accomplished. The Schedule Numbers were then adopted strictly as a convenient designation system for use in ordering, Tall cases, the designer must base his selection on the rules and allowable stresses set by the code which governs his particular construction. The table is dimensionally complete forall sizes and wall thicknesses within its scope, but some of the larger, heavier wall sections are beyond the capability of seamless mill production and must be obtained from forged and bored billets or other sources. “The fist issue of this standard was given with the designation American Standard “tentative” by the American Standards Association in November 1935. Subsequent slight revisions to Table ‘and the footnotes of the dimensional tables were approved and the ASA changed the designation to American Standard; the date of ASA approval was April 28, 1939. Further revisions were made by the Sectional Committee. The list of specifications in Table 1 was revised where necessary and slight revisions in wall thicknesses of some of the large sizes of the heavy schedules were made where P/S values were out of line. It was the hope in 1939 that the designation of pipe used commercially by all industry as Standard weight, Extra Strong, and Double Extra-Strong would gradually be replaced by Schedule Number designation. However, owing to customs of over 50 years’ standing, demand and produc tion of pipe to these traditional dimensions is undiminished. Consequently, in response to a demand from users, accepted practice for dimensions and weights of commercial wrought ste! ‘and welded wrought iron pipe were added. These changes were designated an American Standard ‘on February 23, 1950, ‘Subcommittee No. 1 was reorganized in 1957. In addition to necessary editorial changes, a simplified format was selected for the tables of weights and dimensions so as to include and identify the sizes and weights of API Standards 5L and SLX. These changes to the standard were approved and it was designated an American Standard on December 21, 1959. ‘The standard was revised in 1969. A uniform method to calculate the plain end weight of stee! pipe was included, and minor adjustments were made in the tabulated weights of steel pipe in onyright © 2004 bythe American Society of Mechanical Engincers [No reproduction may be made ofthis material without write consent of ASME,Table 2 to conform to this new method. Additional sizes and thicknesses of steel pipe that had come into common use were also added to Table 2. Inasmuch as API Standard 51 no longer included wrought iron pipe, reference to this API Standard was deleted from Table 3. These changes to the standard were approved and it was designated an American National Standard oon February 3, 1970. Further revisions were made to the standard in 1975. Additional sizes and thicknesses of steel pipe that had been added to API specifications were added to Table 2. Table 3, Dimensions and Weights of Welded Wrought Iron Pipe, was deleted in its entirety, since wrought iron pipe is no longer produced, These changes in the standard were approved and it was designated an American National Standard on June 5, 1975. The standard was revised in 1978 to include $1 metric dimensions. The outside diameter and wall thicknesses were converted to millimeters by multiplying the inch dimensions by 254. (Outside diameters larger than 16 in. were rounded to the nearest millimeter, and outside diameters 16 in. and smaller were rounded to the nearest 0.1 mm. Wall thicknesses were rounded to the nearest 0.01 mm, These converted and rounded SI metric dimensions were added to Table 2. A. formula tocalculate the SI metric plain end mass, in kilograms per meter, using $I metric diameters and thicknesses was added to section 5. The SI metric plain end mass was calculated and was added to Table 2, These changes in the standard were approved and it was designated an American National Standard on July 18, 1979. Further revisions were made in 1984. The ANSI designations, which are no longer in use, were deleted from Table 1, and the list of specifications was revised to agree with current ASTM and 'API specifications. Additional sizes and thicknesses which had been added to API specifications ‘were added to Table 2. That edition was approved as an American National Standard on August 19, 1985, ‘The next edition included additional wall thicknesses and was approved by the American National Standards Institute on August 24, 1995. The 1996 edition contained revisions to Table 2, adding pipe sizes, changing some plain end. weights and masses, identifying metric pipe by the dimensionless designator DN, and eliminating the API Specification column, The 1996 edition was approved as an American National Standard ‘on September 23, 1996. The 2000 edition contained revisions to Table 2 to include the revised density for steel incorpo rated into Section 5 previously. Table 1 was deleted and other editorial changes to Sections 1, 2, 3,5, 8, and 9 were made. The 2000 edition was approved as an American National Standard on December 1, 2000. The current edition contains revisions to Section 5 and Table 1. It corrects the equation for nominal plain end weight. It adds the missing DN schedule numbers in Table 1. This edition was approved as an American National Standard on June 23, 2004 ‘Copyright © 2004 by the American Society of Mechanical Engineers. [No reproduction may be made ofthis material without written consent of ASME.ASME B32 COMMITTEE Metal and Metal Alloy Wrought Mill Product Nominal Sizes {he folowing is the roster ofthe Committe atthe time of approval ofthis Standard) OFFICERS J. A, Gruber, Chir J. alan, Secretary ‘COMMITTEE PERSONNEL FM. Christensen, FM. Chistensen Metalic Consulting ne Cohen, thar Cohen & Associates ‘Graber, Wheatland Tube Co. N. Holiday, LV Stet Co. Inge, American Gas Association, In Karan, The American Socey of Mechanical Engineers ‘vemeland, Kok Met Co. Machel, uk Arian soda, me x I 1 x ® R Bree Fe ‘Copyright © 2004 by the American Society of Mechanical Engineers. & [No reproduction may be made ofthis material without written consent of ASME.ASME 836.106.2008 WELDED AND SEAMLESS WROUGHT STEEL PIPE 1 SCOPE This Standard covers the standardization of dimen- sions of welded and seamless wrought steel pipe for high or low temperatures and pressures. ‘The word pipe is used, as distinguished from tube, to apply to tubular products of dimensions commonly used for pipeline and piping systems. Pipe NPS 12 (DN 300) and smaller have outside diameters numerically larger than their corresponding sizes. In contrast, the outside diameters of tubes are numerically identical to the size ‘number for all sizes 2 SIZE The size ofall pipe is identified by the nominal pipe size The manufacture of pipe NPS % (DN 6) to NPS 12 (DN 200, inclusive is Based on a standardized outside diameter (OD), This OD was originally selected so that pipe with a standard OD and having a wall thickness that was typical of the period would have an inside diameter (1D) approximately equal to the nominal size. Although there is no such relation between the existing Standard thickness OD and nominal size — these nominal sizes and standard ODs continue in use a8 Standard” The manufacture of pipe NPS 14 (DN 350) and larger proceeds on the basis'of an. OD corresponding #0 the Romina size 3. MATERIALS The dimensional standards for pipe described here are for products covered in ASTM specifications. 4 WALL THICKNESS The nominal wall thicknesses are given in Table 1 5 WEIGHTS ‘The nominal weights of steel pipe are calculated val ues and are tabulated in Table 1 The nominal plain end weight, in pounds per foot, is calculated using the following formula: We = 10G0(D ~ where Copyright © 2008 by te American Socey of Meshal Engines. BS [No reproduction may be made ofthis material without written consent of ASME. D = outside diameter to the nearest 0.001 in. (the symbol D isto be used for OD only in mathe- matical equations or formulas) Wye = nominal plain end mass, rounded to the near. est 0.01 Ib/ft 1 = specified wall thickness, rounded to the near- est 0.001 in, The nominal plain end mass, in kilograms per meter, is calculated using the following formula: Wye = .0246615(0 ~ 1 where D = outside diameter to the nearest 0.1 mm for outside diameters that are 16 in. (4064 mm) and smaller and to the nearest 1.0 mm for outside diameters larger than 16 in, (406.4 ‘mm) (the symbol D is to be used for OD only in mathematical equations or formulas) ‘nominal plain end mass, rounded to the near est 0.01 kg/m specified wall thickness, rounded to the near- est 0.01 mm| 6 PERMISSIBLE VARIATIONS. Variations in dimensions differ depending upon the method of manufacture employed in making the pipe to the various specifications available. Permissible varia- tions for dimensions are indicated in each specification. 7 PIPE THREADS Unless otherwise specified, the threads of threaded pipe shall conform to ANSI/ ASME B1.20.1, Pipe Threads, General Purpose (Inch). Schedules 5 and 10 wall thicknesses do not permit, threading in accordance with ANSI/ASME B1.20.1 8 WALL THICKNESS DESIGNATIONS ‘The wall thickness designations Standard, Extra- Strong, and Double Extra-Strong, have been commer ally used designations for many years. As explained in the Foreword, the Schedule Numbers were subsequently added as a convenient designation for use in ordering pipe. Standard and Schedule 40 are identical for up to NPS 10 (DN 250), inclusive. All larger sizes of Standard[ASME 836.100.2004 have % in. (9.53 mm) wall thicknesses. Extra‘Strong and Schedule 80 are identical for up to NPS 8 (DN 200), inclusive. All larger sizes of Extra-Strong have ¥ in, (12.70 mm) wall thicknesses. Pipe of sizes and wall thicknesses other than those of Standard, Extra-Strong, and Double Extra-Strong, and. ‘Schedule Number were adopted from API Specification SL. It was not considered practical to establish Schedule Numbers or new designations for them. 9 WALL THICKNESS SELECTION When the selection of wall thickness depends primar- ily upon capacity to resist internal pressure under given WELDED AND SEAMLESS WROUGHT STEEL PIPE conditions, the designer shall compute the exact value of wall thickness suitable for conditions for which the Pipe is required, as prescribed in detail in the ASME Boiler and Pressure Vessel Code, ASME B31 Code for Pressure Piping, or other similar codes, whichever gov: cerns the construction. A thickness shall be selected from Table 1 to suit the value computed to fulfill the condi tions for which the pipe is desired. ‘Copyright © 2004 by the American Society of Mechanical Engineers. @ [No reproduction may be made ofthis material witout writen consent of ASME.WELDED AND SEAMLESS WROUGHT STEEL PIPE [ASME 836.106.2008 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe dentifcation - {Standard (STD), Sita. ‘Outside Wall Plain End) Extra Strong OS), ‘Outside Wall Plan End Nes Diameter, Thickness, Weight, or Double Extra’ Schedule ON Diamete, Thickness, Mass, ote) In in thy” Strong 1S) No. Mote (mn mm balm % 0405 0049 019 10 6) 103 ae 028 * 040s 0057 on 30 6@) 1031s 032 4 040s 0068 024 S10 rn 6) 10373 037 % 040s 0.098, 031 xs 80 61032 oar % 0540 0065, on 10 675 049 % 0540 0073, 036 30 80) 17s 054 % 0540 0088 04s so ra 80) 137228 os % 0540 019 ose xs 0 56) 37302 080 % 067s 0.085 oz 10 10 va 165 083 | 4 067s 0073 oar 30 10 a 45 070 | % 0675 00m os7 S10 rn 10 vat 034 % 06750126 7a xs 50 10 71320 140 % oto 0.085, 054 5 8 a ene 080 4 ono 0.095, 076 30 15 3 ha ae 4 08Ko 0.109 08s sm “0 6 3 ola aar % mo 0147 109 xs 80 6 nas 1.62 % 0400188 131 160 6 m3 47a 195 % mo 0294 in was 6 730 Tar 255 % 1.050 0.065 088 5 20 7185 103 x 1050 0.083 086 10 20 26702 128 % 1050 0.095 oor 30 20 26702 1a A roso 0.13 113 sid 20 20 267287 1683 1050 ase 148 xs 80 20 2739 2.20 1oso 029 195 160 20 2675586 290 roso 0308 244 was 20 267 7a 3 1 13s 0.06 os7 5 2s Be 165 129 1 rs eao9 1a 10 25 ved 209 1 uns oa 146 30 2s pe 290 218 1 uns a3 168 so 40 2s me a8 2350 1 1s are aar xs 80 2s BA ASS 3a 1 13150250 2385 160 2s Da 63s rer) 1 11s 0358 366 was 2s Ba 909 sas % 1660 0.065 1a 5 2 2165 1.65 w% 1660 0.109 181 10 32 22a 269 % te6o ot? 193 30 3 22297 287 m% 1660 0140 227 S70 rs 3 2386 339 % 1660 191 3.00 xs 80 2 2 Aas aar % 16600250, 37 160 2 22635 Set % 1660 0.382 522 ws t 2 22 «970 a % 1900 0.065 128 5 40 83165 190 . w% 1900 0.109 209. 10 40 3007 an w% 1900 0425 237 30 40 3038 33 vw 1900 0.145 272 0 ry “0 3368 405, its 1900 0.200 3.63 xs 80 “0 425.08 sat % 1900 0.281 a6 160 “0 3744 725 v4 1900 0.400 eat ws Pr 831045 955 3 Copyright © 2004 by the American Society of Mechanical Engineers. [No epreduction may be made ofthis material without written consent of ASME.Tee BIERISTECA ASME 36.10.2004 WELDED AND SEAMLESS WROUGHT STEEL PIPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Tdentifcation Customary Uni jean Luni ‘Outside Wall Plan End Extra Strong (XS), Outside Wall Pain End NPS Diameter, Thickness, Weight, or Double Extra’ Schedule ON__—_Dametet, Thickness, Mass, (Mote (9) in in wy” Strong OOS) No. (Note (2) mm ‘am g/m 2 2375 0.065 161 5 50 3165 239 2 2375 oR 203 50 302 3.03 2 2375109 264 io 50 ws 277 3.93 2 2375 42s 301 0 50 3 318 448 2 2375 ona 337 0 os 388 5.01 2 2375 Oase 3.6 50 “0 0 os 39 5.44 2 2375 oar? ‘05 50 os 47 60a 2 23750188 40 0 3 478 654 2 2375 ons 503 xs 2 50 3s 5.58 748 2 2375 0.250 56 50 3 635, 24s 2 23750281 629 50 3 714 936 2 23750384 rar 16050 3 B74 nat 2 2375036 9.04 as 50 3 07 wae 7% 28750083 248 5 6s pou 369 7% 28750308 32 6 0 ou77 4.90 7% 2875020 353 : 1 65 Bo 3.05 526 YA 2875 ons, 367 6 Bo ae sas 2% 2875 oat an 6 70 388 633 2% 2875 ase “3 6 30 396 674 2% 2k7s ar 497 6 70 4a 740 24 2875 aa 5.40 306s, po 478 08 24 2875 0203 5.80 sto wo 6s Bo 536 365 24 2875 ote 64 6 73059 916 24 23750250 702 65 730635 roe 2% 2878076 787 Xs os 70 701 ra X% 2875 oars 10.02 1606s 09583 1492 2 2s7s 0552 na 335, 65 70 1402 20.39 3 3500 0.083 3.03 . 5 80 9 oa 42 3 3500 0.09, 3.95 7 80 ass 27 5.8 3 3500 0.120 a3 . 10 80 aB9 3.05 646 2 3500 2s ast 80 seo 38 on 3 3800 ota 5.06 2 9358 753 3 3500 0.156 558 2 m9 396 830 3 35000472 612 80 es 437 ou 3 3500 OR 666 : 30 ao ws 478 992 sae 3500216 758 sD © 0 m9 549 1129 3 3500 0.250, 369 80 mo 63s 1293 3 3500 0.281 267 80 mo 714 14.40 3 3500 0.300, 1026 xs 80 80 wes 782 1527 3 3500 0438 134 160 80 93 2135 3 3seo 0.600 18.60 co 0 91524 2768 3% 4000 0.083 ae 5 90 tore aan sae 3% 4000 0.08 433 30 song 277 675 3% 4000 0.120 498 1 (90 1016 3.05 rat W% 400005, sae : 90 re 38 mm 3% 4000 oat 582 90 116 358 2.65 3% hoo 0s6 at 90 1016 396 354 3% 4000 a7? 7.04 : 90 101s 437 1048 34 4000 ae 76 : 5080 101s 78 nat 4 ‘Copyright © 2004 by the American Society of Mechanical Enginers ®@ [No reproduction may be made of this material without writen consent of ASME.ee \WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME 836.10M-2008 Table 1_ Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) ‘dentifcation Customary Units penal a St Units Wall Plain End Extra rong OS), ‘Outside Wall Plain End NPS Diameter, Thickness, Weight, or Double Extra Schedule ON Diameter, Thickness, Mass, (Mote (3) c Whi “Strong 00S)) No. INote (2) mm mm kg/m 34 40000226 932 sD 0 9 11s 5.74 1387 34, 4000 0.250 10.02 30 116 6.35, 192 34 000 oat na7 é 90 ws 74 16.63 3% 4000 ot 1282 s ‘80 90 10Le 8.08 18.66 4 4500 08s 392 1 5 10 maaan 58 4 4500 0.09, 5.2 a 100 m3 277 762 4 4500 0.120, 5.62 : i010 maa 3.05 337 “ 4500025 5385 5 100 m3 38 an 4 4500 oat 657 100 mas 3.58 978 4 450056 726 100 m3 3.96 1078 4 4500 0472 796 100 m3 437 1185 “ 4500.18 867 30100 m3 478 1291 ‘ 4500 0.203, 92 100 mas 5.6 189 “ 4500 0.719 2002 100 mas 556 m9 “ 45000257 20.80 sto 100 mas 02 16.08 ‘ 5000250, 1136 100 maa 635 1691 ‘ 4500 0281 1267 . 100 mas 78 1e87 ‘ 4500 0.12 1397 100 mas 792 2078 4 500 07 15.00 s 6 100 463856 nn 4 500 038 19.02 120° 100 mes ns man 4 4500 oat 2253 160 100 431349 3356 4 45000674 2757 3S 100 m3 aaa 41.03 5 563 0.083 486 ws mis 2a 728 5 5563 0.09 636 Sus. mis 277 946 5 5563 0125 727 25 m3 348 10.83 5 5563 0136 778 10325 wis 3.40 156 5 se ase 902 125 wis 3.96 a 5 S563 88 1080 125 wis 478 16.09 5 563 o2i9 st 125 mis 556 ise 5 5563 258 18 so wos mis 655 aur 5 5563 0281 asa7 125 wis 74 236 5 5563 0312 asi 125 wis 792 2605 5 5563 0348 1919 125 wis B74 2as7 5 5563 0375 20.80 s os wis 953 3097 5 550 0.500 27.06 0125 m3 2704028 5 5563 065 3298 160125 vara 1.88 aga2 5 550 0.750 3859 23 15 una 19.05 S73 ‘ 6525 008s 5.90 150 1683 2a 8.65 6 6625 109 759 $150 1227 31 6 625 aaas, 369 150 1683318 1295 6 6625034 930 3 10150 1682340 Be ‘ 6625 nat oar 150 1683358 1454 6 6625 sé 10.79 5 450 1683396 1605 6 665 472 nar 2 aso 1683437 167 ‘ 6625 088 1294 150 183478 19.28 ‘ 6625 0.203 13.96 150 1835.6 20.76 ‘ 6625 aia 15.00 i 150 1683556 er 6 6625 0.250 17.04 150 1683635, 25:36 6 6625 0.280 18.99 siD wo 150 16637 28.26 5 "omit © 208 he American Sse of Mechanical Egice. gS No reproduction may be made of hi material without writen consent of ASME.[ASME 836.100.2008 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) [WELDED AND SEAMLESS WROUGHT STEEL PIPE ns UWote Customary Units si.units Outside Wall Plan End Extra Sting XS}, Oulside Wall ‘Plain End Diameter, Thickness, Weight, or Double Extra Schedule ‘ON Diameter, Thickness, Mass, in in w/t” Strong 00S) No. Mote 2))__mm ‘mm kgm 6650312 21.06 150 ies 792 ey 665044 23.10 150 1a 74 3439 a5 0375, 2505 150 yha 9.53 a3 es 0432 28.60 x ‘150 168321097 4256 6825 0500 p78 150 16831270473 66s ase 3603, 6150 183427 sat Ses 0.625, 480.09 150 16831588 59.69 665 one 5.38 160150 ree > 1826 ors7 65 0750 © 47.20 150 1683 * 1905 yor2 6625 0.864 5321 70s 150 16832195 79a 65 0875 5378 150 1683 275 80.08 8625 0109 992 5 20 aia arr 1478 as 01s 1136 : 200 aa 8 1693 Ras ous Bat : 10 200 2a 476 997 Bas 0:56 1wa2 . 200 2913.96 201 8625 oes 1696 200 ra are 25.26 8625 0.203 18.28, 200 roa 56 wn 86250219 19.68 200 nar 586 2928 8625 0.250 238 30200 nei 635, 3332 aes 027? 27 30200 nga roe 3682 8625 0312 2773 , 200 nga 792 a125 es 0322 2858 sid ‘a 200 7918 4255 Bes 0sK4 5045 os 200 nga aya 4534 6s 037s 2307 200 rsa 983 49.25 8625 0.406 as.67 6 200 niga 1031 53.09 aes 0438 3833 200 nea a3 57.908 86250500 43.43 xs ‘8200 1911270 ease 86s ose 4800 200 zea taa7 7208 8625 0.594 51.00 joo 200 2911508 792 8625 0.65, 53.45 200 29a 1588 7959 805 ons corr 20200 2911826 90.48 28s 0750 ou 200 nga 19.05 93.98 8625 © osi2 6782 140200 791 2082 10093 8625 0875 749 ws 200 naa 210793 8625 0906 7476 160200 nga maar 8625 1.000, aust 200 nga 34013 10.750 034 15.21 i 5 250 mo 3.40 2261 10.750 056 W767 250 23.0 396 2627 10.750 0.65 1867 i 10250 7300419 2778 10750 0.88 2133 E 250 m0 478 sie 10750 0.203 2289 - 250 2730536 34.08 10750 © a.m9 24.65 1 350 230556 3667 10750 0250 28.06 30 250 230635 ane 107500279, a 250 20 708 4649 10750 0307 paar 30280. 07.80 S101 10750 0.44 3627 350 30 87h 56.96 10750 0.365, 4052 sro 50 23009276029 107500438, 4828 250 2300 a3 russ 6 ‘Copyright © 2004 by the American Society of Mechanical Enginecr, ASME, No reproduction may be made ofthis material without writen eonsWELDED AND SEAMLESS WROUGHT STEEL PIPE [ASME 836,10.2004 Table 1_ Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) ‘dentifcation Customary Units ee tunis Outside Wall —‘Pain End Extra. Strong OS), Ouiside Wall Plain nd NPS Diameter, Thickness, Weight, or Double Extra’ Schedule. —_-DN__—Dlameter, Thickness, Mass, (Mote (im i toi’ Strong 005), No. (Note (2). mm kgm 1010750 S00 5479 xs 6 250 201270 e153 10 10750 0.562 e121 250 2301427 91.05 10107500584 6649 so 250 27301508 95.98 10 10750 2s 6765 250 20158810069 1010750 ots 710 100 250 230186 as 101075012 26.26 250 273082128 1010750 84a 89.38 170250 230 as 0 10 10750 o87s 92.37 250 2300 ase 10 10750 ose 9839 250 2730238314643 10 10750 1.000 10423 wx 10250 2730254015520 3010750 aas ars, 10250 273005817227 30107501250 12694 250 23057518890 2 12750 ose 21.00 . 5 300 ane 396 a2 12750 ara a3 300 33847 saa 212750 ona 29 10 300 mae 457 35.98 3212750 ae 2525 300 mae 478 sr 12 127500203 2123 200 338 56 wos 2 12750 21s 2936 300 38556 3.60 1212750 0.250 ry 30 300 338 635 wont 12127500281 3746 300 mas 744 55.76 2 12750 oan a148 300 me 792 70 1212750 0330 «a1 30300 238838659 1212750 0344 45.62 300 a8 ars orn 1212750 oars “3.61 S10, 300 a8 883 73.86 2 12750 0.406 sas7 «0 300 3238 1001 ron 2212750 O38 srs 300 381 asa 212750 0.500 6548 s 300 32381270 (97.48 12750 0.862 nn 300 38142710893 212750 062s e101 300 m8 158812059 2 12750688 sari 6 300 M38 1748 132.05, 12127500750 3621 300 33.8 1905 44.7 2 12750 os2 103.63 300 38 206215417 1212750 oss. 100300 323.8 ae S987 12 12750875 n1.08 300 3238 2231653 1212750 0938 8.4 300 338383 176.29 1212750 1.000 15.61 ws 120300 3382540 186.92 1212750 1.982 32.69 300 338 6979749 212750 as 39.81 140300 323.8 2858 (208.08, 1212750 1.250 153.67 300 338 317s 8.68 212750 26042 160300 338 3332 38.69 14 14000056 23.09 5 350 3556 3.96 3ase 4 1400088 27.76 350 3556 A736 14 140000203 29°94 350 3556 5.16 4059 4 14000 0.210 30.96 350 3556533604 14 14000 oats 32.26 350 3556 556 48.00 4 14000 0.250 3675 10350 3556635, 54.69 1% 140000281 an 350 35678 6136 14 140000312 4565 2350 356792 eran 7 ‘Copyright © 2008 by the American Society of Mechanical Engineers, 'No reproduction may be made ofthis material without writen coneent of ASME.ee Ase 8361002004 WELDED Ao StaMLSS wROUGIT STEEL PE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steet Pipe (Cont'd) "coaenan standard (S1D), ae Pan tad EtreSten OS. Oats Wal Pan ed wes clametr, Thksest, "Wc ‘orDosletarn’ Scndle OM Ohman, Tos, | wacon “i” “Sioag 0350 hoe" ote me” nm tl eo asst 3 ”~«sse Cara Motes Ge OR Se ee ee ee Mo M83 tle Bs yo ke wh ane | Mo Mow tos Sse 3 BS ORE ORR 1 14000 op arte 30856 gt ass Mow O50 ke 3 OSS ada dS 1 item Oger nas Os iar inn Pe > Sister hom 0s 36 3038561588304 ikem east OSs ks lave % 2 oS Pe ee i Mle ta naa 3s mer at | i i fae 3 OSs RB ite Moe tebe ee ee et i ow te dea yo Sue bao ese ito dae 2 BS BR. Res 4 140m a4 sag to 350 assez aaa tom skh 33 OSS Bele nM Ae ie 3S BS nm Mee wo 30 Ge Sanh dee ow 2 nese 303386 sono toi ie ie ose ge dost A Moe Ee at ose Ras tne ho Moe He re oss Gs. iste 16 t6om ones ar sm eas te ieom ons Saae eS f iO 8B a fe Seas i teow aya fo eee, S58 ae 16 16000 0a © mo ks ie tet tan ae too, RS te teow ote saat melee 1 tebe tae Sar ie. tea, a, | taka Pe ee ee | ‘teow ane ks te a | i teow base whee te I % Moo Gea fo tesa ghar | 16 6000s os © eka \ 1s tee Ose a8 fe tee aay Hae \ 16 ideo aes aout eet ' 16 16.000 0.656 107.60 o 400 806.4 16.66 160.13 te aoa tnee er ee ise i tege ase 8 aaa wo teee ake ite ask as so tees se 1% 16000 oars aman Wo tment 1 ido ame tas tee Bes oo Se we ttee a aaa ye io toteeais ay 8 ‘Copyright © 2004 by the American Society of Mee ‘No reprdiction may be made ofthis materi without writen conse— eS ee WELDED AND SEAMLESS WROUGHT STEEL PPE ASME 836.10W-2008 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) dentiaton —_Costomary Units_ {standard (S10), — ‘Ouside Wall ‘Plain End Extra Strong. OS), ‘Outside NPS Diameter, Thickness, Weigh, or Double Extra Schedule ON _—_Dlametes IWote (0) in in thin “Strong OHS) No. Mote ())__mm 1616000 3062169:59 400 1064 16 160001257889 : 400 1084 36 16000388 88.11 i 400 064 36 16000 3.219 192.61 : 136400 4064 16 16000 3.250970 400 4064 wns 293.38 16 1600033823385 ho 400 Ws 36533 16 1600039458 160400 W064 404936538 18 180000636 5450 w37 419479 18 18000 ee 3580 450 a7 478 SB 18 1800s 450 a7 5566190 18 180000250 ara io 430 a7 6387087 18 18000 oz 53.3 450 a7 rae. 18 180000125899 30480 437752 ar 18 18000 aaa 450 437 87h 9682 18 1800003757085 st 450 45795310817 18 18000 00s 76.36 E 450 usr 10311358 18 18000 0ase 82.23 36480 457 asa 18 1800006? a7 89 : 450 437 1073 18 18.000 «05009354 s 450 437127013816 18 18.000 06210476 40480 a7 a7 ass. 18 180000625 16.09 450 457158817275 18 180000688 127.32 450 ayaa 18947 18 Yeo 075013830 so 480 457190520875 18 1800012 149.20 450 47062 18 18000078 Neo.18 450 4370 238s 38 180000387108 as. 437238325437 38 18000 1.000873 450 43754037036 18 18.000 1062 a92.29 450 4372697 20602 18 1800012520294 450 457285830136 38 1800081562085 ied 450 45729363098 38 18.000 388 13.51 450 437301851768 18 18000 1.250 223.82 480 437787 18 i800 1375 2aa.s7 130480 457349336358 1818000156274 140 43739674088 18 18.000 1.7e1 308.79 160 a0 457052445939 20 70000 o.se 39.82 5 500 sos 4785932 20 00000194632 500 50s $5669 30 20000250 Sa78 10500 5086357886 20 7000 = 02815923, 500 50s 714 ah 20 2000 os? 65.66 500 sos 792 788 20 2000 034728, 500 508874 ars 20 200000373 aar si 2 500 508953 Laz 20 29.00 0.406 85.08 500 508 108112658 20 2000 owe. 00 sos 13638 20 2000 = ome 792 500 50s tng) tas 20 20000 050010423 xs 30500 508127015513 20 200000562678 500 sos 8427 arr 9 Copyright ©2004 by the American Society of Med [No epreducton may be made of his material without wrASME 636.10M-2008 WELDED AND SEAMLESS WROUGHT STEEL PPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Tdentication Customary Units imoaes term Stuns Outside Wall ‘Plain End Exra-Stong (XS), Outside Wall ——‘Pain End NPS Diameter, Thickness, Welght, or Double Exa Schedule. OM _—Dameter, Thickness, Mass, [Mote (in in h/t Strong OS__No. Mote 2) mm mm kal 20 2000005 123.23 40500 soe 350918343 20 20000 0.625 129.45 500 soe sae 19273, 20 20000 oer 142.03 " 500 sos 1748 211.45 20 200000750 154.34 500 5081905 29.1 20 20.0002 16658 S00 sos 7062 247.84 20 200000875 178.89 500 sos 72236631 20 700000938 ana 500 sos 7383 (784.54 20 70.000 © 1.000 203.11 : 500 Sos 2540 02.30 20 20.000, * 1.081 20906 8500 sop 2639 aaa 20 20008" * 1962 215.00 . 500 Sos 2697 19.94 20 0000128 227.00 500 sos 2858 337.91 2 © 200001188 238.91 00 sop jose 355.63 20 200001250 25055 500 soe 7s aragn 20 200001281 256.34 100500 50s 325438155, 20 © 700001312220 00 50s 333239005, 2 © 7000137876, 00 50s 3493 407.51 20 200001500 296.65 120500 soo a0 cans? 2 200001750 ant 140500 sos 4aas—soRs 2 20000 196937953, 160500 50s S001 Sen.ts 2 00 088 3.88 5 580 ‘89 a8 6533 a nT) 50.99 550 5395.56 75.89 2 ~~ 200 0.250 sa.13 10550. 539635 8655 2 790028 65.28 550 597 ora 2 200 © on 7234 550 59792 107.64 2 2.000 0344 79.68 550 59874 118.60, m 000 037s 86.69 S10 wo 580 5995312914 m 20000406 93.72 sso 59 103191 2 2.000 0.438 1096 550 559 naa 15038 m 000 © 0.469307. 350 559 160.69 m ~~ 2.000 © 0500-11492 xs 30550 5591270740 m = 00 see 12879 50 5591427 191.70 2 2.000 0st 350 5891588270 2 220000688 156.74 550 5897s 233.44 2 © 000 ©0730-7037 350 559 190525367 22 2000 oml2 8392 350 589 20627378 2 © m00 © oRs 197.60 6 550 589223987 22 00093819 550 58938331451 22 200 © 1.000 22449 550 592500 538.25, 2 © 200 = 1062 237.70 550 559 2697 353.86 22 00 12525105, 8 550 539858 73.85 22 7200482642 550 559 s018 393.59 22 000 © 135027737 550 sso ws ana 22 200 © «131229035 550 5893332 31.96 2 © 200 ©1375 3036 joo 550 5593493 ass 2 2001438 316.08 550 sso 3653 470.69 2 22000 1.500 32872 . 550 559 38:10 aa9.44 2 ~~ 2000162535304 ito 550 559 A128 527.05, 2 ~~ 72000 «187540338 wo 550 55947636007 2 = 200232545149 160 550 5595398 672.30 10 ‘Copyright © 2004 bythe American Society of Mechanical Engines [No eproduction may be ade ofthis material without written consent of ASME.ee \WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME 636.10™-2008 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Tdentication —_Swstomary unts_—_ standard (S10), —— ‘Oulside —_Wall—‘Plain End’ ExtraStrong XS) Outside Wall Plain End NPS Diameter, Thickness, Weight, or Double Extra. Schedule -ON_—Dameter, ‘Thickness, Mass, (Mote (in Whjte” Strong OOS). Mote (2) mm mm kg/m 24 24000 2k ss.az 5 600. oo 5.54 8258 2% 240000250 aa.az 10600 so 635 953 24 24000281 ns 600 6071430635 24 24000012 7901 600 so 79211760 24 240000344 8599 00 60 878129460 24 240000375 mn sid 20600 60953 aaaz 24 24.000 000s. 10240 F 00 610103135248 a4 uo ose 11032, : 00 6011316438 24 24000 ous 17.98 00 so 91 ars67 24 = 2400005002561 xs 600 610 1270—a87.07 24 240000862140. 50600 610 142720965 24 249000828 S67 600 so 158823267 24 249000688 Tas 0 600 6101748 (255.43 24 2490075018641 z 600 s10 190527763 2 24000 a? 201.28 a 0 610 206229971 2 = 40000875 600 10 722332223 24 240000938 Las 2 600 6102383 aus 2% 24000-0969 23887 600 610246135528 2% 24000 3.000 245.87 : 600 610254036619 24 24000 4.062 260.41 600 S10 269738779 24 2490042850 600 1028580980 24 = 240004 88.73 600 6103018 A385 2 74000 4.219 29486 ‘80 600 103096 az 28 24900 1.250 -——304.00 600 103175 as277 2 240004312, 8821 600 60 3352 473.87 2 001375 352.56 600 6103493 095.38 26 2400013846 83 600 610365351663 ) 24 = 4000 1.500 360.79, 600 6103810 537.36 ) 2 2400015 s07.78 100600 610 3869 sar.74 2 2400015623 7k 66 600 6103967 557.97 24 24000112 a29.79 320600 610 46.02 Ga0.07 24 24000 2062 483.57 140600 6105237 72018 24 24000234 Sut 160 600 6105954 808.27 26 26.000 0.280 a2 650 60 6381026 26 26.000 0261 7736 650 71k 11496 26 26.000 on? 85.68 i 650 | 79212736 26 26.000 0344 9435 650 6 87h 14037 2 26.000 oa7s oar si 650 oo 95315288 26 26.000 0406.13.08, 650 6010 165:19, 26 26000048 119.69, ? 650 660113317810 26 26.000 ous 128.00 650 660 61119036, 26 260000500 136.30 xs 2 650 660 1270278 26 2600005625283, 650 660 14a7 227.25 26 26000 0g 169.54 650 660158825225 26 26.000» 0688 866 650 660174827698 26 260000750 202.44 . 650 660 1905 301: 26 26000 ost2 8 64 650 660 © 208232514 26 26000 © aa7S 235,01 650 660 2223 34.68 26 26.000 0938 251.30 ar) 660 7383 373.87 26 26.000 1.000 267.25, 650 660254039751[ASME 636.100.2008 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) WELDED AND SEAMLESS WROUGHT STEEL PIPE customary Units poate St Units Outside Wall ‘Plain End Extra Strong OS) Ouisile Wall Plain End NPS Diameter, Thickness, Weight, or Double Extra” Schedule ‘DN Diameter, Thickness, Mass, (Mote Gy) In in Thy” “Strong 005) No. IMote (29) mm mm ksi 28 28000 0.250 7036 700 m 63511038 2 28.000 281 83.26 700 mo 718 23.96 28 28000-0312 9235 io 700 mo 792 a3 2% 28.000 0344 101.70 nc) mo 87h 5137 ve 2800003751074 sm 700 7953 164.86 28 98.000 0406. 119.76 700 710317816 28 28.000 0438129.05, 700 m3 9210 2% 28000-0469 13803, 700 m1 119120534 2% 28.000 0500 146.99 xs 20 700 mi 1270 ar 2% 28.000 0562 «164.84 = 700 mi 1437 2asas 2% 28.000 062518290 36700 mi 1588 aa 2% 28.000 ©0488 «20087 700 mi ras 29896 ve 28000-07508 700 71 1905 325.08 28 98.000 0812-73600 709 7 208235107 2 28000 087s 253.72 700 m3 57760 2 28.000 0938 271.36 700 m8 403 2% 28.000 3.000 «(28863 700 mt 3540 (429.46 30 30000 0.250 7951 5 70 762635 38.34 2 = 30000-0281 8927 750 72 74h 13292 3 30000312 99.02 10750 7279234729 30 300000344 109.06, 730 762 87h 16236 3030000 037511876 so 730 762 98317685 30 30.000 0406. 178.44 750 72 om 19142 3030000 oases 138.42 750 762131320610 30 30.000 046? 148.06 750 720191 mo? 2 300000500 357.68 xs 20 750 70 Dee 30 30,000 0562 «176.86 750 762 26314 3030.00 0625 (196.26 30750 702 29220 3030000688 25.58 750 78 32095 30300000750 23451 . 750 702 349.08 30 30,000 081225336 750 702 377.01 30 30.000 0875.72.43, : 750 72 © 23 405.56 30 300000938 291.41 : 750 72 B38 30 30000 .000-s10.01 750 762 75.40 a6. 30 30000 1.062 328.53, 750 7622697 488.88 30300025347 26, 750 72 7858 s1693 30300001188) 365.90, : 750 762 3018 548.68 30 3000012503847 750 72 ss S779 2 ~— 200 0.250 aaas 800 sis 63512632 2 320000281 95.28 800 813714 141.90 mR ~— 2000-02 105.69, 10 800 ss 79215725 mR 20000344 116.41 800 m3 8747335, nm 320000375678 S10 00 895318 3232000 0406137212 800 12103120809 2 320000438147. 78 100 8301132030 R20 049 158.08, 00 ss 235.28 32 32.000 aso0 16837 xs 2 800 en 127025065 52 -32.000as62 188.87 100 e147 281.09 32 32.000 © 062520962 30800 easee 3127 32 32000088 230.29 0 800 o174k 34.98 2 ‘Comyright © 2008 by the American Society of Mechanical Engineers [No repredcton may’ be made of this material with ‘ASME.hn WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME 836.100.2004 Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Tdentfication ee Bi e. eee ‘Ouiside Wall ‘Plain End Extra Strong OS), ‘Outside Wall Plan End NPS Diameter, Thickness, Weight, or Double Extra Schedule ON Diameter, Thickness, Mass . (Mote) In In loft ‘Strong O05) Mo. Mote (2) mm rm kg/m 32 3200078025055, 00 131905 «373.00 32 3200 oB12 077 800 3208240294 32 32000 oss Aw 00 m3 722343352 32 20000938 ar 00 a3 1B 46378 32 32.000 4.000 31.39, “ 200 m3 25.40 493.35 32 32.000 062,351.23, : 800 32697 522.80 32 32000 a2s 73 200 #32858 552.88 32 32000 gs 392.30 200 #33018 Se.64 32 32.000 42250-41090 800 a3 ns ene 34 34.000 0.250 90.20 . aso er 34340000281 101.29, aso ae 7k 50.88 3h 34.000 a2 112.36 io aso. ace 7926728 Sa 34.000 asses 12877 aso ace 7h 18k 34 4000037533479 sto 80 26695320082 34 34.000 .406 145.80, 850 Bee 1031, 217.06 34340000438 157.14 850 ee 132340 34 34.000 .a68 68.11 850 see 19125027 34 3400000017906 xs 20850 ace 127026663 34 3400005622009, 850 661427 299.08 34 34.000 0625.22.99 30850 66188 a32.14 34 34000 0.688 245.00, 4850 866174826492 34 34.000 a7s0 266.58 850 ss 190539696 34 34.0000? 28808 850 fs 082288 3434000875 309.84 850 B64 2223 34 34.000 0938 332.82 850 B64 2383 a9” 34 34.000 1.000 35277 f 850 Bet 2540 525.30 34 34.000 1.062 573.94 : 850 Bet 269758673 34 34.000 1125 395.36 f 1850 Soe 7858 SRA 34 34000188 A670, 850 B66 3018 620.60 34340001250 37.62 1 850 Bee 575 65.65 36 36.000 0.250 95.54 300 638 tana 36 36.000 0281 107.30 900 su Tak 59.68 36 36000 nz 19.03 10 900. ou 79217697 36 36000-0344 a8? 900 ou 8741982 36 36.000 037s taza si 300 ou 953 nar 36 3600000615448 900 su 1031 229.77 36 3600004381665 900 su 113 2ar.82 3636000 0.469 178.14 900 914119126496 36 36.000 aso0 189.75 xs 2 900 sie 1270 282.29 36 «360000622120 300 ou 1aa7 66 36 36000 0.825 236.35 3% 900 141588 a51.73 36 36.000 0688 259.71, 900 1a 1748 «38647 36 36.000 0750 282.62 © 990 914190542045 36 3600001230544 900 914206245430 36 36.000 087532855 a 900 94 7223 488.89 36 360000338 351.57 : 900 m4 738 823.14 13 Copyright © 2004 by the American Society of Mechanical Engineer. [No epreducton may be made ofthis material without written consent ofll UMS oe ee ASME 836.108-2008 ‘WELDED AND SEAMLESS WROUGHT STEEL PIPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Identiiestion Customary Unis enna stunts Outside Wall ‘Plain End Extr-Srong XS), ‘Outside Wall Pain End NPS. Diameter, Thickness, Weight, or Double tra Schedule ON __——Dlameter, Thickness, Mass, iwote Qin r hj "Strong O4S—_—_No. ‘Mote )}__mm mm kel 36 36000 1.000745 900 9142540 556:62 36 36.000 1.062 396.68 900 sid 2697589398 36 3600011751942 900 942858 aur 36 36000188 442.30 300 sis 01s as7.81 36 36.000 125046435 900 Sih 317569080 8 38.000 0.312 125.70 950, 965 792 186.94 38380000348 950 965 876 206.18 3838000075508 sib 950 965 953 2456 38 38.000» 0406636 950 965 10314274 38 3800004387887 950 965 as 26182 38 38.000 046d 188.17 ‘ 950 965 0 79394 38 38000-0500 (200.44 vs 950 965 ©1270 398.26 38 38.000 0562224392 950 9650 aT nse 383800006257 950 9651588 71.70 38 380000688274. 950 965174808. 38 38.000 0750 (298.65 950 96 1905 Aaa 38 38000082 322.80 950 96 206248024 3a 38.000 oss, 7.26 950 965 22731685 38380000938 71.63 950 965 23835531 38 38.000 3.000 395.53 950 965 2540588357 38380001062 19.35 950 965 2697 62390 3B 38000175 ar 950 965 2858 660.01 3838000188 467.50 950 9653018 695.77 38 380001250 491.07 950 965175 730.74 so oo? ana 1000 1016 79219690 40 40.000 0.344 145.83 1.000 1016 8% 2741 | 4 4000003751885 sip 1000 1016 95323654 40 4.000006 17.88 1000 1016 103125572 40 400000438 185.28 1000 1016 a3 752 30 40.000 06719819 1000 101612949 40 400005003. 8 1000 1016 1270343 40 4.00 056223693 1000 m6 1427382583 40 40.000 062526307 1000 1016 1588 391.67 40 40.000 0.688 789.13 1000 101617483045 40 00000750 aes 1000 1016 1905468337 40 40000 om12 Moe 1000 1016 206250637 40 49.000 0875 365.97 1000 167223 stamt 40 «0.000938 391.68 11000 1016 2383 583.08 40 40.000 1.000 an6.91 11000 10162540 «e204 40 «9.000 1.062 442.05 2000 10162697 782 40 40.000 3.25 467.52 11000 1016 785865596 40 00018849250 1000 1016 301873373 70 40.00 1.250 537.80 11000 10183175 770.67 424200 03m 53.8 : 2080 106787422830 42 42.00 037516586 sto 1050 106795324853 422.000 0406 180.52 : 1050 1067 103126867 42 42.000 0438 198.60 1050 10671328987 ‘Copyright © 2004 bythe Amerian 8 [No reproduction may be made of this matWELDED AND SEAMLESS WROUGHT STEEL PPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) [ASME 836.10M-2008 dentifcation Customary Units ion, Stunts Outside Wall ‘Plain End ExraStrong OS), Ouiside Wall Plan End NPS Diameter, Thickness, Weight, or Double xtra. Schedule. DN Dlametet, Thickness, Mass, (Mote) in in jm Strong OS) No, ‘Mote (2) mm rm aim 42 42000 0469 (208.22 1050 1067119130990 42 42000 © 0500-21-82 is 1050 106712703021 42 200 056224895, 1050 1067142737048 42420000625 276.48 1050 10671588 an.64 42 42.000 0.688 303.84 1050 1067 174s 45243 42 42000 ©0750 330.72 1050 10s? 19.05 492.33 42 42000 a2 357.82 1050 1072082 S32 42 420000875 (388.67 1050 1os7 3357277 42 42.000 0.938 aa.74 . 11050 1067 238361305 42 42000 1.000 438.29, 5 1050 1067254065248 4242000 1.062 64.76, 1050 10672697 oars 42 420001257 1050 106785873191 42 420001851830, - 2050 1067 3018 771.69 42 420001250 44s? 3 1050 1067317581060 4@—44000 0.344 160.58 2100 1s 87h 239.09 ae a000 03757488 sib 1100 1B 95326057 ae e000 0.05 189.20, a 100 ug 303121. Me ta000=— 0.38 (203.97, 3100 ag 14330387 Me fao00 0698.25, 1100 anes) sas Me 4000050023251 is 1100 ins 127034638 Me 440000562 (260.97, 1100 ams 1427887 Me 440000625 289.80, 1100 181588 ae 44 44000 0.688 31855 1100 ane 1748474 44 449000750346 76, 1100 aie 190551629 44 44000-23748 1100 ime 2062 ss8o4 44 4400008754038 1100 ame 2223 oor 4444000038 a3. 79 1100 ine 7383 643.03, 44 44.000 2.000 459.67 1100 ine 2540 tua 44 44000 1.062 487.47 1100 ane 2697725467 4444000325 515.63 1100 1k 285876785 44 44000 3.188 543.70, 1100 ine 301880965 444000 1.250 572.25 1100 ie 7s 85056 46 46000 oaae 789 - 1150 1168 878 209.87 46 46000-0375 12.90, st 1150 116895327227 46 46000 0.069788, i 1150 1168103129435 46 46000 043k 3.33, 1150 16831754 46 46000 0.469 228.27, 2150 118 gl 23956 46 = 46000 0.500 243.20, xs 3150 116812703618 46 460000562 272.98, 7 aso 1168142740802 46 45000 0.625 03:16, . 1150 11681588 451.20 46 46000 0.688 333.26, 2150 1168174849597 46 46000 0750 382.79, 3150 11681905 539.78 46 46000 O12 392.28, 1150 116820625837 46 46000 0875 22.09, 4150 1168-2338 46 4600009385185, 1150 11682383 72M, 46 46000 1.000 81.05 1150 11825401573, 46 46000 3.062 51017, 1150 3168269775892 46 46000125 539.68, 1350 11687858 803.09 46 46000188 569:10 1150 11683028466 46 46000 1.250 9797 1150 11683175 9.69 is material without waten conse Copzieh ©2004 by the Amen Sociey of MecanslEagnces. GBs [No reproduction may be made of ASME.C—O Ase 36 100.2008 Weoeo AND SEAMLESS WROUGHT STEEL PPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) dentition Casey Uns ek stuns Onde ‘Wal Pain nd Eresong OO, wde wal Pan ed ws lamets, Thdnes,"Wighy‘orDoele in’ Shudule ON Dlamee,Thidess, Mass wote() in tnt “Song G5 ote mm mb a a8000 osm 7525 1m akan on tars oss li tis 353 mas Soo aoe esse tio tn toate om ass are tio thy tnas nse ss s000 one 23830 1m” az igtase ‘teow ogo ase imo tn ino te teooo sez aes00 imo in tar i theo bas Sess imo in isa aha | ss somes a7 1200 tn iran rs Seon 0950 Sones im in igos Sean om tate ost imo in teen ‘som oars ao im my asset | bom ass so imo in as on 48 48.000 1.000 502.43 1200 1219 25.40 747.67 i ftom aes saa tim 1p ere ftom seas lo ins sabe % tooo ties S550 tio 1p jones | & tov 1350 Sano timo Tho 3tys panes 22 320003750698 13001319538 | 32 S200 aoe basa, 1300 13a taan 38 | 3] Seam assaana 13m aa ttas sae 3 am tessa 1300 13a, eas | 52 s2000 0500 asa 13001327076 | Sam Ose 30903 130 bata tsp | 5 S200 eas 38 tie 3a isan sina 32 S200 Gass 738 timo aa pases 3 S200 Gan nana iim ts most eta? 2 Som Gans eat timo tga aas ine 5 Som apne Sanat io nas e233 5252000 1000 ssap . 130 mek 2540 atts $2 Sao00 teen aa 1300 «13a ear seoas 3 Somos ganas i300 aa mnse— ross 3 Som tase sso tao aa anaes Sears | 3 Som 1s eras tooo tank ass 19a | sé e000 07s, aap 1400 1aa2 ast Se Seon Gace aa 23 tio tame seat dane | So Seon case zens to iaa2 nis are se Seon aes at to fasts ear | 565000 asco aaeas 1400 1a 70 aan $é Seano ase 3336 to ia tarsal se Seon ans ear tio faa isee oer se Seon cess an Sako ie tras tesa s6 sem 0750 a7 v 1400 aaa a0 espa se Seom —aane ras tio 1a dae as se Seomaars sans timo ta has are Se Sem ose az? tio tan asks 6 Copyright ©2001 ye Anercn Sia of nial No pada my be made fiat wiht we ons of ASMEWELDED AND SEAMLESS WROUGHT STEEL IPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) es sees customary Units ‘outside Diameter, 56.000 56.000 56.000 56.000 56.000 60.000 60.000 60.000 60.000 60.000 60,000 60,000 60,000 60.000 60.000 60.000 60.000 0.000 0.000 0.000 0.000 64.000 64.000 4.000 64.000 64.000 4.000 64.000 64.000 64.000 64.000 6.000 4.000 64.000 64.000 ‘8.000 ‘8.000 68.000 ‘58.000 ‘8.000 Wal Thickness, [Note (2) 1.062 135 1388 0375 0.406 038 0.468 0500 0562 0.25 0.688 0750 0812 0875 0.938 1.000 11062 aaas, 1388 1250 037s 0.406 0.438 0.469 0.500 0.562 0.425 0.688 0750 0938 1.000 1082 15 1168 1250 0.688 0.750 oan oars 0938 Plain End Weight tof 587.95 659.94 696.10 71.60 23902 25865 778.88 29847 21803 357.09 33670 43622 51377 553.08 59223 e071 669.11 708.05 746.90 785.05 255.06 x60 297.61 aan 381.12 wa 465.64 5484s ona7 nas? 75615 797.69 53850 495.06 sa9.18 583.21 @rs7 ors, Taentifcation [standard (S10), ava: Strong 1S), ‘or Double Extra ‘Strong 025) Schedule Note cn 1400 1400 1400 1400 11400 1500 1500 1600 1600 1 600 1 600 1600 1 600 1 600 1700 1700 1700 1700 1700 ‘Outside aan aan aan aan wane 1524 1524 1526 1526 1524 1524 1520 12a 66 66 1626 1626 1626 1626 1626 am ar am amr an 177 Wall Thickness, 25.40 26.97 28.58 3018 1588 1748 1905 2082 2223 283 1031 ma3 an91 19.05 2082 223 2383 25.40 2697 aus 3270 1427 1588 2082 Plain End kg/m 7403 927.86 992.12 03891 355.96 sp0.62 70703 76450 823.391 881.63 93873 a7091 sos 443.25 474.09 75495 21637 879.23 901.87 002.62 06355 soars 53692 one 67032 867.73SOOO ee ASME B36 10N-2008 WELDED AO SEAMLESS WROUGHT STEEL PIPE Table 1 Dimensions and Weights of Welded and Seamless Wrought Steel Pipe (Cont'd) Tdentieation {customary Units json, ts Outside Wall Plain End ExtrStong OS), ‘Outside Wall Plan End NPS Diameter, Thickness, Weight, or Double Extra’ Schedule ON Diameter, Thickness, Mass, ote (3) in in thy "Strong (5) Mo. Note) mm mm balm 6 68000 1.000 736.23 3700 1727540 1065.89 68 68.000 1.067 75993 1700 in7 2697113073 68 68.000 1175 804.26 1700 177758 1197.09 6 6.000188 ang 1700 i727 3018126292 6 68.000 1.250 89195 3700 i778 132738 72 720000500 382.47 a 1800 1270 sear nm ~— Tew Ose? A918 : 1800 1427 638.68 72 720000625 47687 a 1800 158871006, 72 71000 0see 5248 1800 14s 78092 2 90 0750 srs 1800 1m9 19055032 2 700 om? 617 93 1800 1m29 206291960 72 7100008756528 1800 169 722399052 2 mo 0s38 7235 1800 1629 723831060387 72 71000 3.000 75899 1 800 2540 1129.78, 72 7200030670534 4800 2697119857 2 7200313585236 4800 mss 1260598 72 7200031888929 3 800 5018133883 72 719001250 945.40 1 800 3u75 4407.25, 76 760000500 403.85 1900 1930 600.50 . 76 76000 «0562 453.28 1900 1930 eras 76 76000 -0625——‘503.60 1900 1930 19.82 78 760000688 55390 1900 1930 20.45 76 76000 075060032 1900 1990 1905 e777 7 76000 0m12 65265 3900 193 062 97096 7% 760000875 70270 3900 3930 7223 1045.89 7 76.000 093875266 1900 1990783117027 7% 76000 1.000 son.75 1900 1930 2540119305 7% 7600010885075 1900 19302697 1265.74 7% 7e000 112590087 1900 1930 7858134017 7% 7600018895009 3900 1990 301811401 . 76 76000-1250 998.85 1900 1930317514863 8 0.000 ose2 72s 2000 202 a7 ria 8 90.000 0.625 33037 2000 2032158878856 8 90.000 0.688 583.32 2000 20321748 868.43 0 800000750 «g35.39 2000 2032 190595. 8 0.000 0828737 2000 202 062107289 8 80.000 0875 740.12 2000 202223110181 8 so.000 0938927 2000 20238318017 8 80.000 1.000 44k 2000 2032540125694 8 90.000 1.062 896.17 2000 2022697139359 8 80.000 1.125 94857 2000 2032858141206 8 80.000 1.188 1,000.89 2000 2032 39018 1.48992 808.000 1.250 1,052.30 2000 2032 3175156620 Notes: (2) NPS (Nominal Pipe Size isa dimensionless designator that has been substituted in the customary units Section forthe previous tem inch Nominal Sle {2) DN Qominal Diameter) isa dimensionless designator used in the SI metic) system to descibe pipe size (0) See ASME 616.11-2001, para. 3. 18 ‘Copyright © 200% by the American Society of Mechanical Engineers [No eprodition may be made of his material without writen consent of ASMASME B36.10M-2004 SBN 0-7518- tl ‘ost04