Scribd
Upload
526 views2 pages

MS MBA 3.2 H4 L4 - Datasheet - V01222023

This document summarizes a multi-beam base station antenna that utilizes a patented spherical lens design. It has 3 high-frequency beams from 1695-2690MHz with 4 ports each, and 2 low-frequency beams from 698-960MHz with 4 ports each. Each high-frequency beam provides 120 degree horizontal coverage with a 40 degree 3dB beamwidth, while each low-frequency beam has the same coverage but a 60 degree 3dB beamwidth. The antenna has mechanical and environmental specifications listed and uses 12 female 4.3-10 connectors for the high-frequency beams and 8 for the low-frequency beams.

Uploaded by

Ahmed Timraz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
526 views2 pages

MS MBA 3.2 H4 L4 - Datasheet - V01222023

This document summarizes a multi-beam base station antenna that utilizes a patented spherical lens design. It has 3 high-frequency beams from 1695-2690MHz with 4 ports each, and 2 low-frequency beams from 698-960MHz with 4 ports each. Each high-frequency beam provides 120 degree horizontal coverage with a 40 degree 3dB beamwidth, while each low-frequency beam has the same coverage but a 60 degree 3dB beamwidth. The antenna has mechanical and environmental specifications listed and uses 12 female 4.3-10 connectors for the high-frequency beams and 8 for the low-frequency beams.

Uploaded by

Ahmed Timraz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MS-MBA-3.

2-H4-L4
Multi-beam Base-Station Antenna (MBA)
Lens Technology EnabledTM Multi-Beam Base-Station Antenna perfect
for 6 to 9 high-band sector LTE cell site deployment and 3 to 6 low-
band sector LTE cell site deployment for best CINR results. Utilizes a
patented spherical lens design with 3 isolated high-frequency (1695-
2690MHz) cross-polarized beams and 2 isolated low-frequency (698-
960MHz) cross-polarized beams. Each beam is made of two
independent antennas and has 4 ports. There are two independent tilt
settings per beam (0-30° for HB and 0-40° for LB) tilt for each pair of
cross-polarized elements.

PATTERN RESULTS:

High-Band Horizontal Pattern (1.80GHz) High-Band Vertical pattern 0° tilt and 30° tilt (1.80GHz)

Low-Band Horizontal Pattern (750MHz) Low-Band Vertical Pattern 0° tilt and 40° tilt (750MHz)

EMAIL: [email protected] WEBSITE: www.matsing.com PHONE: (949)585-5144


MS-MBA-3.2-H4-L4

TECHNICAL SPECIFICATIONS PER BEAM MECHANICAL DATA

Frequency 1695-2690 MHz 698-960MHz 182.6 X 61.2 X 71.8 cm


Dimensions (H x W x D) 71.9 X 24.1 X 28.3 inch

Gain 17.8dBi 13.5dBi


59.62 kg
Antenna Weight
131.4 lbs
VSWR <1.5:1 <1.5:1

Radome Material Fiber Glass


Polarization Dual Slant ±45° Dual Slant ±45°

2 position pipe mount


Horizontal Coverage 120° 120°
Mounting Compatible pipe diameter:
Horizontal Beamwidth (10dB level) 40° 60° 6.1 – 11.4 cm
2.4 – 4.5 inch
Horizontal Beamwidth (3dB level) 23° 34°

Vertical Beamwidth (10dB level) 40° 60° ENVIRONMENTAL RATINGS


Vertical Beamwidth (3dB level) 23° 34°

Beam Cross-over 10dB typical 10dB typical Humidity 95% RH @ +30°C

Total Number of Beams 3 2 Temperature -40°C to +70°C

Frontal: 786 N/ 176.7 lbf


Number of Ports per Beam 4 4 Wind load @ 150km/h Lateral: 1223 N / 275 lbf
Rear: 1129 N/ 253.8 lbf

Number of Ports Total 12 8


CONNECTOR LAYOUT:

Tilt Per Cross-Pol 0° to 30° 0° to 40°

First Sidelobe Level <-16dB <-15dB

Front to Back Ratio >28dB >28dB

Isolation Port to Port - Polarization >28dB >28dB

Isolation Port to Port - Beam >28dB >26dB

Power Rating 200W per port 250W per port

Intermodulation <-153dBc <-153dBc

Impedance 50 ohm 50 ohm

Connector Quantity and Type 12 x 4.3-10 female 8 x 4.3-10 female

EMAIL: [email protected] WEBSITE: www.matsing.com PHONE: (949)585-5144

You might also like