Scribd
Upload
134 views

Neo2 Zone-Slot Configuration Screen Overview

This document provides an overview of the Zone/Slot Configuration screen in the Altanium Neo2 operator interface. The screen is used to activate or remove zones, configure thermocouple input types, and set current limits for cards. It is password protected and for Husky personnel only. Navigation instructions are provided to access the screen through the home and system setup screens. Key descriptions define the zone keys, parameter keys to edit zones, thermocouple types, and amperage values. Contact information is given for Husky technical support.

Uploaded by

JUAN PABLO NIÑO
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
134 views

Neo2 Zone-Slot Configuration Screen Overview

This document provides an overview of the Zone/Slot Configuration screen in the Altanium Neo2 operator interface. The screen is used to activate or remove zones, configure thermocouple input types, and set current limits for cards. It is password protected and for Husky personnel only. Navigation instructions are provided to access the screen through the home and system setup screens. Key descriptions define the zone keys, parameter keys to edit zones, thermocouple types, and amperage values. Contact information is given for Husky technical support.

Uploaded by

JUAN PABLO NIÑO
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Altanium Neo2

Zone/Slot Configuration Screen Overview

This overview pertains to the Zone/Slot Configuration Screen in the Altanium Neo2 operator interface.

Screen Overview:
The Zone/Slot Configuration screen is used to activate or remove zones from the software, configure the
thermocouple input type and set the current limit of the cards. It is password protected and is to be
accessed by Husky personnel only.

Navigation:

To access the Zone/Slot Configuration screen, follow these steps:


1. Touch the HOME key in the system header
2. In the Home screen, touch the SYSTEM SETUP key
3. In the System Setup screen, touch the SYSTEM key to display a 10-key pop-up window
4. In the 10-key pop-up, enter the Code 1122 and touch the ENTER key

2
1

3 4

5 6

Key Descriptions:

Item Description
These keys represent each zone in the system and display certain values
1 Zone Keys
based on parameter that is displayed on the Zone/Slot Parameter key.

Touch this key to add or remove zones from the software. If a zone is active
Zone/Slot the Zone key will display the number of the zone and track the number of
2 Parameter Key – received (RX) messages from the card that the zone is assigned to. RX
ON/OFF messages from 0-5 will show up as red and those from 6-8 will be displayed
as green. To make a change, select the desired zone or zones and touch the

Confidential Page 1 2/11/2010


Altanium Neo2
Zone/Slot Configuration Screen Overview

ON/OFF key to toggle the zones between on or off.


IMPORTANT: The system must be rebooted after any changes have been
made to the zone/slots configuration.
Touch this key to scroll up in the list of parameters that can be displayed on
3 Scroll Up key
the Zone/Slot Parameter key.

Touch this key to scroll down in the list of parameters that can be displayed
4 Scroll Down key
on the Zone/Slot Parameter key.

5 Select All Key Touch this key to select all the available Zone keys on the screen.

6 Clear All Key Touch this key to deselect all the available Zone keys on the screen.

Touch this key to select a group of zones in consecutive order. To do so,


touch the Block key, then touch the first zone in the group, and then touch
7 Block Key
the last zone in the group. This will automatically select all of the zones in
between.
Touch this key to exit the Zone/Slot Configuration screen and return to the
8 OK Key
System Setup screen

Key Descriptions:

Item Description
Zone/Slot Touch this key to change the thermocouple input type displayed on the Zone
1
Parameter Key – key. To make a change, select the desired zone or zones and touch the T/C

Confidential Page 2 2/11/2010


Altanium Neo2
Zone/Slot Configuration Screen Overview

T/C key to toggle between J (J-Type thermocouple, (+) Iron/ (-) Constantan)
and K (K-Type thermocouple, (+) Chromel/ (-) Alumel).

Key Descriptions:

Item Description
Touch this key to change the amperage value displayed on the Zone keys.
This value represents the maximum amperage rating of the card in the
Zone/Slot system that a zone is assigned to. To make a change, select the desired
1 Parameter Key - zone or zones and touch the AMPS key to display a 10-key pop-up window.
AMPS In the 10-key pop-up, enter in the desired amperage value and touch the
Enter key. The range of values is from 0-30 amps. In systems that utilize XL-
Series cards (black heat sink); this value should always be zero.

Husky Technical Support:


Telephone Support Numbers:

Toll free 1-800-465-HUSKY (4875) Choose option 2, then option 4


North America
Direct 1-905-951-4875
For on-site service, contact your nearest Husky Regional Service and Sales office.

Husky Regional Service and Sales Offices:

For the location closest to you, please visit www.husky.ca.

Confidential Page 3 2/11/2010

You might also like