PT694BT

Hi-Fi Wireless BT Home Theater Receiver

Surround Sound Stereo Amplifier System
with 4K Ultra HD Support, AM/FM Radio (1000 Watt MAX)
 Safety Precautions 1. Power Switch 9. CH. MODE
A. Avoid opening the cover or back panel. Do not open the 2. USB Input jack Press CH.MODE key to select different
cover, fix or touch the inner parts. No user-serviceable 3. DIGITAL INPUT KEY channel mode.
parts inside, refer servicing to qualified service personnel. 10. MENU
Press DIGITAL INPUT key to
B. Protect voltage line. Avoid high pressure and to be Press MENU key and rotate VOLUME/
stomped on, do not pull, push excessively. select COAXIAL/OPTICAL/
MULTI knob to adjust main channel
C. Please put on this unit in the windy place, avoid direct DIGITAL 1/DIGITAL 2/ DIGITAL 3/
BALANCE/main channel TREBLE/
sunshine and nearing heater. Place the unit in a location and USB digital input. main channel BASS/surround
with adequate air circulation. 4. ANALOG INPUT KEY channel VOLUME/center channel
D. Do not interfere with its proper ventilation; this will cause
Press ANALOG INPUT key to select VOLUME and subwoofer channel
the internal temperature to rise and may result in a failure.
E. Avoid metals dropping in, like needle, hairpin, coin, BT/DVD/CD/AUX and FM analog input. VOLUME.
otherwise the unit will get short and out of work. 5/6/7. /CH- / /AUTO/ /CH+ 11. OK MENU
F. Be sure to set the line voltage AC230V/50Hz if you are not Use these three keys to operate USB/BT When inserting the microphone,
sure of the type of power supply, consult your appliance press OK MENU key and rotate
and Tuner functions.
dealer or local power company. VOLUME/MULTI knob to adjust
a. In USB or Bluetooth channel, press
MIC VOLUME/MIC TREBLE/MIC
For MAINS powered apparatus and for apparatus producing these three keys to finish previous/
BASS/ECHO and DELAY.
internal voltages greater than 35V (peak) a.c. or d.c., having play/pause and next functions. 12. MIC1/MIC2
no protection against splashing water according to annex A, b. In FM channel, press AUTO key for Microphone input jacks.
the instructions for use shall state that the apparatus shall not be exposed to
broadcast stations auto-memory. 13. VOLUME/MULTI
dripping or splashing and that no obiects filled with liquids, such as vases, shall be
placed on the apparatus 8. ARC 14. VFD display

Front Panel Rear Panel

1 14 13 1 12 13 14 15 16 17

110V~ 60Hz

2 3 4 5 6 7 8 9 10 11
2 3 4 5 6 7 8 9 10 11 12

2 www.PyleUSA.com www.PyleUSA.com 3
 1. FM ANTENNA 10. FRONT LEFT CHANNEL OUTPUT System Connection
2. CD/DVD AUDIO INPUT 11. POWER SOCKET
3. AUX AUDIO INPUT 12. COAXIAL INPUT
4. ACTIVE SUBWOOFER OUTPUT 13. OPTICALINPUT
5. PASSIVE SUBWOOFER OUTPUT 14. HDMI 1 INPUT
6. CENTER CHANNEL OUTPUT 15. HDMI 2 INPUT
7. SURROUND RIGHT CHANNEL OUTPUT 16. HDMI 3 INPUT
8. SURROUND LEFT CHANNEL OUTPUT 17. HDMI OUTPUT (WITH ARC)
9. FRONT RIGHT CHANNEL OUTPUT

Remote Control Function Introduction

1. Standby 24. MIC echo -
2. Analog input 25. Mute
3. Digital input 26. Loudness on
4. Channel select 27. Loudness off
5. Dsp mode 28. HiFi mode
6. Bass + 29. Treble -
7. Treble + 30. Reset
8. Bass - 31. Right surround
9. Center volume + volume +
10. Left surround 32. Right surround
Volume + volume -
11. Right surround 33. Center volume-
volume - 34. Subwoofervolume +
12. Subwoofer volume - 35. Balance right
13. Main volume + 36. Main volume -
14. Balance left 37. AM/FM
15. Bluetooth channel 38. USB/BT stop
16. ARC 39 USB/BT play/pause
17. USB/BT next 40. FM channel -
18. USB/BT previous 41. FM channel +
19. FM tuning + 42. FM auto
20. FM tuning - 43. FM memory
21. MIC volume + 44. MIC delay +
22. MIC volume - 45. MIC echo -
23. MIC echo +

4 www.PyleUSA.com www.PyleUSA.com 5
 Operating Instructions MAIN CHANNEL TONE AND BALANCE
Preparation before operation Press the 'MENU' on the control panel of the receiver system. Adjust the display
• This product must be placed on a flat, solid object to ensure that it has sufficient 'TRExx' 'BASSxx' and 'L-- //--R'. 'VOLUME/MULTI' is volume/Multi-function knob.
capacity to support the product without falling. This knob can adjust main channel bass/Treble volume level and Left/Right channel
• Please use this product according to the safety requirements in front of this volume balance.
manual and connect with other products (TV, speaker, DVD player or player) as
USB OPERATION
required.
Press the 'Input' button on the remote control or on the control panel of the receiver
• Open the audio source device connected to this product
system. Select 'USB'mode. Then insert USB flash disk. This unit can automatically
• Press the power switch button on the panel to turn ON the power.
play the USB flash disk file. Then press , , button to operate the corresponding
function. Supports WMA/MP3/APE/PLAC files
Operation
Channel Selection Note:
The product has 11 pairs channels input, digital channel input and analog channel 1. Because video files continuously updates, this product can't play all format files.
input: Select HDMI 1-3, OPTICAL, COAXIAL and USB digital input by pressing digital 2. If USB flash disk doesn’t work on USB mode. The operation is invalid
input button on the panel or remote control. MIC
• Insert MIC. The display will show 'OK ON'
Select AUX, BT, DVD/CD and FM by pressing the 'analog input' button on the panel • Press the 'OK MENU' on the control panel of the receiver system. Rotate 'VOLUME
or remote control. /MULTI' knob. Adjust MIC volume. Press the 'MIC VOL+/-"MIC ECHO+/-"MIC DELAY
+/-" on the remote control. Adjust the microphone Master/echo/delay volume level.
Channel Mode
Press "channel mode", select2.1 or 5.1 channels on the panel or remote control HIFI
• In ANALOG INPUT mode, press the 'HIFI' button on the remote control.
Volume Adjustment Output is 2.0ch stereo audio mode.
Total volume adjustment: HDMI
Rotate the "VOLUME/MULTI" VOLUME/multi-function adjusting knob on the panel, 1. Connect audio equipment (Blu-ray DVD player, Set Top Box ) with HDMI output
or press the 'total VOlUME +/-' button on the remote control to adjust the VOLUME. by using HDMI cable.
2. Press the 'Digital input' on the remote control or on the control panel of the
Center, surround, heavy bass channel volume adjustment: receiver system. Select the appropriate channel.
Press "main menu" on the panel, adjust the screen to show "CV xx", ''the SRV xx'', 3. Press the 'CH. MODE' on the remote control to change the channel of the
''xx'' and ''SWVxx SLV'', then rotate the "MULTI' VOLUME/multifunctional adjustment broadcast program.
button on the panel, adjust the Volume of center channel, right surround channel, 4. HDMI with ARC function. Set the TV audio in 'External speaker' or 'Audio
left surround channel and the heavy bass channel. system', press 'ARC ON' on remote control,. The display will show 'ARC on', This
amplifier can play the TV audio. Press 'ARC off', The amplifier goes back to default
Press the ''Center volume +/-'' surround volume +/-'' and ''heavy bass +/-'' button channel.
on the remote control , adjust the volume of Center, surround and heavy bass.
Note: HDMI Version 1.4B. Support 3D 4K
Channel.
Make sure the TV has ARC function and set the TV in ARC ON state.

6 www.PyleUSA.com www.PyleUSA.com 7
 Wireless BT Function Troubleshooting
1. The receiver connects to your Bluetooth-enabled device, allowing the system to
receive your wireless bluetooth signal and stream audio to any connected
speaker system. Problem Probable Cause Solution
2. Press the 'ANALOG INPUT' on the remote control or on the control panel of the The power socket is in poor Check the power supply and plug
receiver system, then enter to 'BT' mode--as indicated on the display screen. No display contact or without electricity of the socket.
3. Ensure Bluetooth is activated on your device and search for bluetooth Network
1. The speaker wiring is wrong. 1. Connect the speaker line
Named: PYLEUSA
2. The playback source doesn’t according to the wiring diagram
4. No password is required for connecting. corresponds to the selected 2. Select the input state which is
There’s display but
ARC (Audio Return Channel) Function no sound output signal state playing
The ARC (Audio Return Channel) function makes it easy for the PT694BT to play 3. The volume level is in lowest 3. Turn the main volume & adjust
audio from any TV with a single HDMI cable. It can be adjusted either on the front output state. the knob clockwise.
4. MUTE is activated 4. Disactivate MUTE
control panel or via the included remote control.
1. The remote transmitter window 1. Aim at the host receiving
Enable your TV to send audio signal upstream to a connected speaker system or AV
is not aimed at the local window.
receiver while eliminating additional cable connections and clutter from an optical Remote control receiving window. 2. Remove obstacles
audio cable (S/PDIF). ARC audio transmission links your speaker output to your doesn’t work 2. There are obstacles between 3. Replace new battery
television controls, meaning you do not need an external / additional remote or the unit and the remote control
interface to configure audio levels. Enjoy an optimal multimedia home theater 3. Drained remote control batteries
experience by connecting your television and Hi-Fi equipment into one, seamless
Being disturbed or improperly
entertainment system. Out of control
operated
Turn it OFF and than turn it ON
FM RADIO sound distortion Main volume adjustment is too much Turn down the main volume
Press 'AUTO " TUNE+/-" CH+/-' button on the remote control. Operate automatic The channel sound Channel sound mode is not correct Press 'CH. MODE' on the panel or
search and save station, manually save and select the stored station function. is wrong remote control
DSP Sound Field Control Music files in USB
Press 'DSP' or 'CH MODE' on the remote control. 7 different sound field effects can can’t be played for The USB files is not supported Delete unsupported files
be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS) long period of time
NOTE: Pressing those button on the digital input channel is invalid The phone cannot 1. Tha bluetooth function of 1. Turn ON bluetooth
transmit audio to mobile phone is not opened. 2. Open the phone and play music
LOUD the amplifier via 2. No music is played on the 3. Rematch Bluetooth connection
Press 'LOUD ON' on the remote contnol. The low frequency of this unit can be bluetooth. phone. 4. Switch the amplifier input into
increased appropriately at low volume. Then press 'LOUND OFF' to cancel this 3. Amplifier Bluetooth is not 'BT' channel.
function. paired with mobile phone 5. Turn off other bluetooth devices
DISPLAY bluetooth.
4. Incorrect amplifier input channel
Press 'DISPLAY' button on the remote conlrol to adjust different display mode.
5. Bluetooth can't connect.
RESET
Press 'RESET' button on the remote control to restore to the factory setting state.
If you are still experiencing issues, please contact your authorised local dealer or
MUTE
Press 'MUTE' button on the remote control to turn ON or OFF MUTE function. contact us on www.PyleUSA.com.
STANDBY
Press 'STANDBY' button on the remote control to turn ON standby state.
Press again to cancel standby mode.

8 www.PyleUSA.com www.PyleUSA.com 9
 PT694BT Wireless Bluetooth Connectivity:
Hi-Fi Wireless BT Home Theater Receiver • Simple & Hassle-Free Pairing
Surround Sound Stereo Amplifier System with 4K Ultra HD Support, AM/FM Radio • Instantly Receives Wireless Music Streaming
(1000 Watt MAX) • Works with all of Today’s Latest Devices
Smartphones, Tablets, Laptops, Computers, etc.)
Features: • Bluetooth Version: 4.0
• 5.2 Channel Receiver System • Bluetooth Network Name: ‘PYLEUSA’
• AV (Audio/Video) Stereo Amplifier • Wireless Range: 30’+ ft.
• Hi-Fi Home Theater Surround Sound
• Built-in Bluetooth Wireless Audio Streaming Technical Specs:
• Next Gen Audio DSP Sound Processing Technology • Power Output: 1000 Watt MAX
• 4K Ultra HD TV Pass-Through Support • Amplifier Receiver Type: 5.2-Channel
• 3D Video & Blu-Ray Video Pass-Through Support • Speaker Impedance: 4-16 Ohm Questions? Issues?
• Front Panel Digital LCD Display We are here to help!
• S/N Ratio: >80dB
• AM & FM Stereo Radio Phone: (1) 718-535-1800
• T.H.D.: <0.05% Email: [email protected]
• Connect & Stream Audio from External Devices
• Frequency Response: 20Hz-20kHz
• MP3 Digital Audio Support
• Radio Station Memory: 30 Presets
• USB Flash Drive Reader
• DSP/EQ: Live, Hall, Disco, Church, Rock, Jazz, Classic
• Connection Interface: (3) x HDMI, RCA (L/R), Speaker Binding Posts, Optical /
Digital Audio • Digital Audio File Support: MP3 / WMA
• HDMI Output + Dedicated RCA Subwoofer Output • Maximum USB Flash Support: Up to 16GB
• (2) 1/4’’ -inch Microphone Inputs • Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Not Included
• Independent Input Source Selection • Power Cable Length: 3.9’ ft.
• Digital Graphic Audio Output Level Display • Power Supply: 120V
• Mic Echo, Bass, Treble, Volume Control Adjustment • Total Unit Dimensions (L x W x H): 16.9’’ x 12.8’’ x 4.9 ’’ -inches
• Over Current, Short Circuit, and Over Voltage Protection

What’s in the Box:

• AV Receiver
This product can expose you to a chemical or group of checmicals, which may include
• Remote Control “Lead (Pb)” which is known in the state of California to cause cancer, birth defects, or
• AM & FM Antennas other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

10 www.PyleUSA.com www.PyleUSA.com 11