ALIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY,ALIGARH

(Approved By AICTE New Delhi, Affiliated to AKTU Lucknow)

PRACTICAL FILE
Submitted in partial fulfillment for the award of
BACHELOR OF TECHNOLOGY
(CSE), 2nd year
Submitted by

RUPESH VARSHNEY
Roll No:- 2001090100045

Submitted To
Mr. Kapil Arora
(Operating Systems Lab: KCS-451)
[Session: 2021-2022]
 INDEX

Sr.No. Name Of Experiments Signature

1. Write a Program in C for CPU SCHEDULING
Algorithm.
2. Write a Program in C for producer-consumer
problems using semaphores.
3. Write a Program in C for Dining-Philosophers
problem.
4. Write a Program in C for Fixed Memory
Partitioning Techniques.
5. Write a Program in C for Contiguous Memory
Allocation Techniques.
6. Write a Program in C for Page Replacement
Algorithms.
7. Write a Program in C for Deadlock Avoidance.
8. Write a Program in C for Disk Scheduling
Algorithms.

Student Name:- Rupesh Varshney

Practical Name:- Operating Systems Lab

Practical Code:- KCS-451

Branch/Year: CSE 2nd Year

Semester:- IV

AKTU Roll No:- 2001090100045

CPU SCHEDULINGALGORITHMS

A). FIRST COME FIRST SERVE:

AIM: To write a c program to simulate the CPU scheduling algorithm First Come First
Serve (FCFS)

DESCRIPTION:

To calculate the average waiting time using the FCFS algorithm first the waiting
time of the first process is kept zero and the waiting time of the second process is the
burst time of the first process and the waiting time of the third process is the sum of the
burst times of the first and the second process and so on. After calculating all the waiting
times the average waiting time is calculated as the average of all the waiting times. FCFS
mainly says first come first serve the algorithm which came first will be served first.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process name and the burst time Step
4: Set the waiting of the first process as ‗0‘and its burst time as its turnaround time Step
5: for each process in the Ready Q calculate
a). Waiting time (n) = waiting time (n-1) + Burst time (n-1) b).
Turnaround time (n)= waiting time(n)+Burst time(n)
Step 6: Calculate
a) Average waiting time = Total waiting Time / Number of process

b) Average Turnaround time = Total Turnaround Time / Number of process

Step 7: Stop the process

SOURCE CODE:

#include<stdio.h>
#include<conio.h>
main()
{
int bt[20], wt[20], tat[20], i, n;
float wtavg, tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", i, bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n);
getch();
}
INPUT
Enter the number of processes -- 3
Enter Burst Time for Process 0 -- 24
Enter Burst Time for Process 1 -- 3
Enter Burst Time for Process 2 -- 3

OUTPUT
PROCESS BURST TIME WAITING TIME TURNAROUND
TIME
P0 24 0 24
P1 3 24 27
P2 3 27 30
Average Waiting Time-- 17.000000
Average Turnaround Time -- 27.000000
 B). SHORTEST JOB FIRST:

AIM: To write a program to stimulate the CPU scheduling algorithm Shortest job first
(Non- Preemption)

DESCRIPTION:

To calculate the average waiting time in the shortest job first algorithm the sorting of
the process based on their burst time in ascending order then calculate the waiting time of
each process as the sum of the bursting times of all the process previous or before to that
process.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU
burst time
Step 4: Start the Ready Q according the shortest Burst time by sorting according to
lowest to highest burst time.
Step 5: Set the waiting time of the first process as ‗0‘ and its turnaround time as its burst
time.
Step 6: Sort the processes names based on their Burt time
Step 7: For each process in the ready queue,
calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 8: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process
Step 9: Stop the process
SOURCE CODE :

#include<stdio.h>
#include<conio.h>
main()
{
int p[20], bt[20], wt[20], tat[20], i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
p[i]=i;
printf("Enter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);

}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(bt[i]>bt[k])
{
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;

temp=p[i];
p[i]=p[k];
p[k]=temp;
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0]; for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\n\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", p[i], bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n); getch();}
INPUT
Enter the number of processes -- 4
Enter Burst Time for Process 0 -- 6
Enter Burst Time for Process 1 -- 8
Enter Burst Time for Process 2 -- 7
Enter Burst Time for Process 3 -- 3
OUTPUT
PROCESS BURST WAITING TURNARO
TIME TIME UND TIME
P3 3 0 3
P0 6 3 9
P2 7 9 16
P1 8 16 24
Average Waiting Time -- 7.000000
Average Turnaround Time -- 13.000000
 C). ROUND ROBIN:

AIM: To simulate the CPU scheduling algorithm round-robin.

DESCRIPTION:

To aim is to calculate the average waiting time. There will be a time slice, each
process should be executed within that time-slice and if not it will go to the waiting
state so first check whether the burst time is less than the time-slice. If it is less than it
assign the waiting time to the sum of the total times. If it is greater than the burst-time
then subtract the time slot from the actual burst time and increment it by time-slot and
the loop continues until all the processes are completed.

ALGORITHM:
Step 1: Start the process
Step 2: Accept the number of processes in the ready Queue and time quantum (or) time
slice
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Calculate the no. of time slices for each process where No. of time
slice for process (n) = burst time process (n)/time slice
Step 5: If the burst time is less than the time slice then the no. of time slices =1.
Step 6: Consider the ready queue is a circular Q, calculate
a) Waiting time for process (n) = waiting time of process(n-1)+ burst time of
process(n-1 ) + the time difference in getting the CPU from process(n-1)
b) Turnaround time for process(n) = waiting time of process(n) + burst time of
process(n)+ the time difference in getting CPU from process(n).
Step 7: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process Step
8: Stop the process
SOURCE CODE
#include<stdio.h>
main()
{
int i,j,n,bu[10],wa[10],tat[10],t,ct[10],max;
float awt=0,att=0,temp=0;
clrscr();
printf("Enter the no of processes -- ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for process %d -- ", i+1);
scanf("%d",&bu[i]);
ct[i]=bu[i];
}
printf("\nEnter the size of time slice -- ");
scanf("%d",&t);
max=bu[0];
for(i=1;i<n;i++)
if(max<bu[i])
max=bu[i];
for(j=0;j<(max/t)+1;j++)
for(i=0;i<n;i++)
if(bu[i]!=0)
if(bu[i]<=t) {
tat[i]=temp+bu[i];
temp=temp+bu[i];
bu[i]=0;
}
else {
bu[i]=bu[i]-t;
temp=temp+t;
}
for(i=0;i<n;i++){
wa[i]=tat[i]-
ct[i]; att+=tat[i];
awt+=wa[i];}
printf("\nThe Average Turnaround time is -- %f",att/n);
printf("\nThe Average Waiting time is -- %f ",awt/n);
printf("\n\tPROCESS\t BURST TIME \t WAITING TIME\tTURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\t%d \t %d \t\t %d \t\t %d \n",i+1,ct[i],wa[i],tat[i]);
getch();}
INPUT:

Enter the no of processes – 3

Enter Burst Time for process 1 – 24
Enter Burst Time for process 2 -- 3
Enter Burst Time for process 3 – 3
Enter the size of time slice – 3

OUTPUT:
PROCESS BURST TIME WAITING TIME TURNAROUNDTIME
1 24 6 30
2 3 4 7
3 3 7 10
The Average Turnaround time is – 15.666667 The
Average Waiting time is ------------ 5.666667
 D). PRIORITY:

AIM: To write a c program to simulate the CPU scheduling priorityalgorithm.

DESCRIPTION:

To calculate the average waiting time in the priority algorithm, sort the burst
times according to their priorities and then calculate the average waiting time of the
processes. The waiting time of each process is obtained by summing up the burst times
of all the previous processes.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Sort the ready queue according to the priority number.
Step 5: Set the waiting of the first process as ‗0‘ and its burst time as its turnaround time
Step 6: Arrange the processes based on process priority
Step 7: For each process in the Ready Q calculate Step 8:
for each process in the Ready Q calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 9: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process Print the results
in an order.
Step10: Stop
SOURCE CODE:
#include<stdio.h>
main()
{
int p[20],bt[20],pri[20], wt[20],tat[20],i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("Enter the number of processes --- ");
scanf("%d",&n);
for(i=0;i<n;i++){
p[i] = i;
printf("Enter the Burst Time & Priority of Process %d --- ",i); scanf("%d
%d",&bt[i], &pri[i]);
}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(pri[i] > pri[k]){
temp=p[i];
p[i]=p[k];
p[k]=temp;
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;
temp=pri[i];
pri[i]=pri[k];
pri[k]=temp;
}
wtavg = wt[0] = 0;
tatavg = tat[0] = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] + bt[i-1];
tat[i] = tat[i-1] + bt[i];

wtavg = wtavg + wt[i];

tatavg = tatavg + tat[i];
}
printf("\nPROCESS\t\tPRIORITY\tBURST TIME\tWAITING TIME\tTURNAROUND
TIME");
for(i=0;i<n;i++)
printf("\n%d \t\t %d \t\t %d \t\t %d \t\t %d ",p[i],pri[i],bt[i],wt[i],tat[i]);
printf("\nAverage Waiting Time is --- %f",wtavg/n); printf("\nAverage
Turnaround Time is --- %f",tatavg/n);
getch();}
 INPUT
Enter the number of processes -- 5
Enter the Burst Time & Priority of Process 0 --- 10 3
Enter the Burst Time & Priority of Process 1 --- 1 1
Enter the Burst Time & Priority of Process 2 --- 2 4
Enter the Burst Time & Priority of Process 3 --- 1 5
Enter the Burst Time & Priority of Process 4 --- 5 2
OUTPUT
PROCESS PRIORITY BURST TIME WAITIN TURNARO
G TIME UND TIME
1 1 1 0 1
4 2 5 1 6
0 3 10 6 16
2 4 2 16 18
3 5 1 18 19
Average Waiting Time is --- 8.200000
Average Turnaround Time is --- 12.000000

VIVA QUESTIONS
1) Define the following
a) Turnaround time b) Waiting time c) Burst time d) Arrival time
2) What is meant by process scheduling?
3) What are the various states of process?
4) What is the difference between preemptive and non-preemptive scheduling
5) What is meant by time slice?
6) What is round robin scheduling?
EXPERIMENT.NO 2

AIM: To Write a C program to simulate producer-consumer problem using semaphores.

DESCRIPTION
Producer consumer problem is a synchronization problem. There is a fixed size buffer where th
producer produces items and that is consumed by a consumer process. One solution to the produce
consumer problem uses shared memory. To allow producer and consumer processes to ru
concurrently, there must be available a buffer of items that can be filled by the producer and emptie
by the consumer. This buffer will reside in a region of memory that is shared by the producer an
consumer processes. The producer and consumer must be synchronized, so that the consumer doe
not try to consume an item that has not yet been produced.

PROGRAM
#include<stdio.>
void main()
{
int buffer[10], bufsize, in, out, produce, consume,
choice=0; in = 0;
out = 0;
bufsize = 10;
while(choice !=3)
{
printf(“\n1. Produce \t 2. Consume \t3. Exit”);
printf(“\nEnter your choice: ”);
scanf(“%d”,&choice);
switch(choice) {
case 1: if((in+1)%bufsize==out)
printf(“\nBuffer is Full”);
else
{
printf(“\nEnter the value: “);
scanf(“%d”, &produce);
buffer[in] = produce;
in = (in+1)%bufsize;
}
break;;;
case 2: if(in == out)
printf(“\nBuffer is Empty”);
else
{
consume = buffer[out];
printf(“\nThe consumed value is %d”, consume);
out = (out+1)%bufsize;
}
break;
} } }
OUTPUT
1. Produce 2. Consume 3. Exit
Enter your choice: 2
Buffer is Empty
1. Produce 2. Consume 3. Exit
Enter your choice: 1
Enter the value: 100
1. Produce 2. Consume 3. Exit
Enter your choice: 2
The consumed value is 100
1. Produce 2. Consume 3. Exit
Enter your choice: 3
 EXPERIMENT.NO 3
AIM: To Write a C program to simulate the concept of Dining-Philosophers problem.

DESCRIPTION
The dining-philosophers problem is considered a classic synchronization problem because it is an examp
of a large class of concurrency-control problems. It is a simple representation of the need to allocate sever
resources among several processes in a deadlock-free and starvation-free manner. Consider five philosophe
who spend their lives thinking and eating. The philosophers share a circular table surrounded by five chair
each belonging to one philosopher. In the center of the table is a bowl of rice, and the table is laid with fiv
single chopsticks. When a philosopher thinks, she does not interact with her colleagues. From time to time,
philosopher gets hungry and tries to pick up the two chopsticks that are closest to her (the chopsticks that a
between her and her left and right neighbors). A philosopher may pick up only one chopstick at a tim
Obviously, she cam1ot pick up a chopstick that is already in the hand of a neighbor. When a hung
philosopher has both her chopsticks at the same time, she eats without releasing her chopsticks. When she
finished eating, she puts down both of her chopsticks and starts thinking again. The dining-philosophe
problem may lead to a deadlock situation and hence some rules have to be framed to avoid the occurrence
deadlock.

PROGRAM
int tph, philname[20], status[20], howhung, hu[20], cho; main()
{
int i; clrscr();
printf("\n\nDINING PHILOSOPHER PROBLEM");
printf("\nEnter the total no. of philosophers: ");
scanf("%d",&tph);
for(i=0;i<tph;i++)
{
philname[i]=(i+1); status[i]=1;
}
printf("How many are hungry : ");
scanf("%d", &howhung);
if(howhung==tph)
{
printf(“\n All are hungry..\nDead lock stage will occur”);
printf(\n”Exiting\n”);
else{
for(i=0;i<howhung;i++){
printf(“Enterphilosopher%dposition:”,(i+1));
scanf(“%d”,&hu[i]);
status[hu[i]]=2;
}
 do
{
printf("1.One can eat at a time\t2.Two can eat at a time
\t3.Exit\nEnter your choice:");
scanf("%d", &cho);
switch(cho)
{
case 1: one();
break;
case 2: two();
break;
case 3: exit(0);
default: printf("\nInvalid option..");
}
}while(1);
}
}
one()
{
int pos=0, x, i;
printf("\nAllow one philosopher to eat at any time\n");
for(i=0;i<howhung; i++, pos++)
{
printf("\nP %d is granted to eat", philname[hu[pos]]);
for(x=pos;x<howhung;x++)
printf("\nP %d is waiting", philname[hu[x]]);

}
}
two()
{
int i, j, s=0, t, r, x;
printf("\n Allow two philosophers to eat at same
time\n"); for(i=0;i<howhung;i++)
{
for(j=i+1;j<howhung;j++)
{
if(abs(hu[i]-hu[j])>=1&& abs(hu[i]-hu[j])!=4)
{
printf("\n\ncombination %d \n", (s+1));
t=hu[i];
r=hu[j]; s++;
printf("\nP %d and P %d are granted to eat", philname[hu[i]],
philname[hu[j]]);
 for(x=0;x<howhung;x++)
{
if((hu[x]!=t)&&(hu[x]!=r))
printf("\nP %d is waiting", philname[hu[x]]);
}
}
}
}
}

NPUT
DINING PHILOSOPHER PROBLEM
Enter the total no. of philosophers: 5
How many are hungry : 3
Enter philosopher 1 position: 2
Enter philosopher 2 position: 4
Enter philosopher 3 position: 5

OUTPUT
1. One can eat at a time 2.Two can
eat at a time 3.Exit Enter your choice: 1

Allow one philosopher to eat at any time

P 3 is granted to eat
P 3 is waiting
P 5 is waiting
P 0 is waiting
P 5 is granted to eat
P 5 is waiting
P 0 is waiting
P 0 is granted to eat
P 0 is waiting
1.One can eat at a time 2.Two can eat at a time 3.Exit
Enter your choice: 2

Allow two philosophers to eat at same time

combination 1
P 3 and P 5 are granted to eat
P 0 is waiting

combination 2
P 3 and P 0 are granted to eat
P 5 is waiting

combination 3
P 5 and P 0 are granted to eat
P 3 is waiting

1.One can eat at a time 2.Two can

eat at a time 3.Exit Enter your choice: 3
 EXPERIMENT.NO 4
MEMORY MANAGEMENT

A). MEMORY MANAGEMENT WITH FIXED PARTITIONING TECHNIQUE (MFT)

AIM: To implement and simulate the MFT algorithm.

DESCRIPTION:

In this the memory is divided in two parts and process is fit into it. The process which is best
suited will be placed in the particular memory where it suits. In MFT, the memory is partitioned
into fixed size partitions and each job is assigned to a partition. The memory assigned to a
partition does not change. In MVT, each job gets just the amount of memory it needs. That is, the
partitioning of memory is dynamic and changes as jobs enter and leave the system. MVT is a
more ``efficient'' user of resources. MFT suffers with the problem of internal fragmentation and
MVT suffers with external fragmentation.

ALGORITHM:

Step1: Start the process.

Step2: Declarevariables.
Step3: Enter total memory size ms.
Step4: Allocate memory for os.
Ms=ms-os
Step5: Read the no partition to be divided n Partition size=ms/n.
Step6: Read the process no and process size.
Step 7: If process size is less than partition size allot alse blocke the process. While allocating
update memory wastage-external fragmentation.
if(pn[i]==pn[j])f=1;
if(f==0){ if(ps[i]<=siz)
{
extft=extft+size-
ps[i];avail[i]=1; count++;
}
}
Step 8: Print the results
EXPERIMENT.NO 5
MEMORY ALLOCATION TECHNIQUES

AIM: To Write a C program to simulate the following contiguous memory allocation techniques
a) Worst-fit b) Best-fit c) First-fit

DESCRIPTION
One of the simplest methods for memory allocation is to divide memory into several fixed-sized
partitions. Each partition may contain exactly one process. In this multiple-partition method, when a
partition is free, a process is selected from the input queue and is loaded into the free partition. When the
process terminates, the partition becomes available for another process. The operating system keeps a
table indicating which parts of memory are available and which are occupied. Finally, when a process
arrives and needs memory, a memory section large enough for this process is provided. When it is time to
load or swap a process into main memory, and if there is more than one free block of memory of
sufficient size, then the operating system must decide which free block to allocate. Best-fit strategy
chooses the block that is closest in size to the request. First-fit chooses the first available block that is
large enough. Worst-fit chooses the largest available block.

PROGRAM

WORST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,t
emp; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - First Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
20

Page 25
 for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
{
ff[i]=j;
break;
}
}
}
frag[i]=temp;
bf[ff[i]]=1;
}
printf("\nFile_no:\tFile_size :\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}
INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 1 5 4
2 4 3 7 3

21

Page 26
BEST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int frag[max],b[max],f[max],i,j,nb,nf,temp,lowest=10000;
static int bf[max],ff[max];
clrscr();
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
printf("Block %d:",i);
scanf("%d",&b[i]);
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}
for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
if(lowest>temp)
{
ff[i]=j;
lowest=temp;
}
}}
frag[i]=lowest; bf[ff[i]]=1; lowest=10000;
}
printf("\nFile No\tFile Size \tBlock No\tBlock
Size\tFragment"); for(i=1;i<=nf && ff[i]!=0;i++)

printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

22

Page 27
 Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 2 2 1
2 4 1 5 1

FIRST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,temp,highes
t=0; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - Worst Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}
23

Page 28
 {
for(j=1;j<=nb;j++)
{
if(bf[j]!=1) //if bf[j] is not allocated
{
temp=b[j]-f[i];
if(temp>=0)
if(highest<temp)
{
}
}
frag[i]=highest; bf[ff[i]]=1; highest=0;
}
ff[i]=j; highest=temp;
}
printf("\nFile_no:\tFile_size:\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 3 7 6
2 4 1 5 1

24

Page 29
 EXPERIMENT NO.6

PAGE REPLACEMENT ALGORITHMS

AIM: To implement FIFO page replacement technique.

a) FIFO b) LRU c) OPTIMAL

DESCRIPTION:
Page replacement algorithms are an important part of virtual memory management and it helps the OS to
decide which memory page can be moved out making space for the currently needed page. However, the
ultimate objective of all page replacement algorithms is to reduce the number of page faults.
FIFO-This is the simplest page replacement algorithm. In this algorithm, the operating system keeps track
of all pages in the memory in a queue, the oldest page is in the front of the queue. When a page needs to be
replaced page in the front of the queue is selected for removal.

LRU-In this algorithm page will be replaced which is least recently used

OPTIMAL- In this algorithm, pages are replaced which would not be used for the longest duration of time
in the future. This algorithm will give us less page fault when compared to other page replacement
algorithms.

ALGORITHM:
1. Start the process
2. Read number of pages n
3. Read number of pages no
4. Read page numbers into an array a[i]
5. Initialize avail[i]=0 .to check page hit
6. Replace the page with circular queue, while re-placing check page availability in the frame
Place avail[i]=1 if page is placed in the frame Count page faults
7. Print the results.
8. Stop the process.

25

Page 30
A) FIRST IN FIRST OUT
SOURCE CODE :

#include<stdio.h>
#include<conio.h> int fr[3];
void main()
{
void display();
int i,j,page[12]={2,3,2,1,5,2,4,5,3,2,5,2};
int
flag1=0,flag2=0,pf=0,frsize=3,top=0;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0; flag2=0; for(i=0;i<12;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1; break;
}
}
if(flag1==0)
{
for(i=0;i<frsize;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1; break;
}
}
}
if(flag2==0)
{
fr[top]=page[j];
top++;
pf++;
if(top>=frsize)
top=0;
}
display();
}
26

Page 31
printf("Number of page faults : %d ",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("%d\t",fr[i]);
}

OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
5 3 1
5 2 1
5 2 4
5 2 4
3 2 4
3 2 4
3 5 4
3 5 2

Number of page faults: 9

27

Page 32
 B) LEAST RECENTLY USED

AIM: To implement LRU page replacement technique.

ALGORITHM:

1. Start the process

2. Declare the size
3. Get the number of pages to be inserted
4. Get the value
5. Declare counter and stack
6. Select the least recently used page by counter value
7. Stack them according the selection.
8. Display the values
9. Stop the process

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
int fr[3];
void main()
{
void display();
int p[12]={2,3,2,1,5,2,4,5,3,2,5,2},i,j,fs[3];
int index,k,l,flag1=0,flag2=0,pf=0,frsize=3;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0,flag2=0;
for(i=0;i<3;i++)
{
if(fr[i]==p[j])
{
flag1=1;
flag2=1; break;
}
}
if(flag1==0)
28

Page 33
{
for(i=0;i<3;i++)
{
if(fr[i]==-1)
{
fr[i]=p[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<3;i++)
fs[i]=0;
for(k=j-1,l=1;l<=frsize-1;l++,k--)
{
for(i=0;i<3;i++)
{
if(fr[i]==p[k]) fs[i]=1;
}}
for(i=0;i<3;i++)
{
if(fs[i]==0)
index=i;
}
fr[index]=p[j];
pf++;
}
display();
}
printf("\n no of page faults :%d",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("\t%d",fr[i]);
}

29

Page 34
OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
2 5 1
2 5 1
2 5 4
2 5 4
3 5 4
3 5 2
3 5 2
3 5 2

No of page faults: 7

30

Page 35
 C) OPTIMAL

AIM: To implement optimal page replacement technique.

ALGORTHIM:

1. Start Program
2. Read Number Of Pages And Frames
3.Read Each Page Value
4. Search For Page In The Frames
5.If Not Available Allocate Free Frame
6. If No Frames Is Free Repalce The Page With The Page That Is Leastly Used
7.Print Page Number Of Page Faults
8.Stop process.

SOURCE CODE:

/* Program to simulate optimal page replacement */

#include<stdio.h>
#include<conio.h>
int fr[3], n, m;
void
display();
void main()
{
int i,j,page[20],fs[10];
int
max,found=0,lg[3],index,k,l,flag1=0,flag2=0,pf=0;
float pr;
clrscr();
printf("Enter length of the reference string: ");
scanf("%d",&n);
printf("Enter the reference string: ");
for(i=0;i<n;i++)
scanf("%d",&page[i]);
printf("Enter no of frames: ");
scanf("%d",&m);
for(i=0;i<m;i++)
fr[i]=-1; pf=m;

31

Page 36
for(j=0;j<n;j++)
{
flag1=0; flag2=0;
for(i=0;i<m;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1;
break;
}
}
if(flag1==0)
{
for(i=0;i<m;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<m;i++)
lg[i]=0;
for(i=0;i<m;i++)
{
for(k=j+1;k<=n;k++)
{
if(fr[i]==page[k])
{
lg[i]=k-j;
break;
}
}
}
found=0;
for(i=0;i<m;i++)
{
if(lg[i]==0)
{
index=i;
found = 1;

32

Page 37
 break;
}
}
if(found==0)
{
max=lg[0]; index=0;
for(i=0;i<m;i++)
{
if(max<lg[i])
{
max=lg[i];
index=i;
}
}
}
fr[index]=page[j];
pf++;
}
display();
}
printf("Number of page faults : %d\n", pf);
pr=(float)pf/n*100;
printf("Page fault rate = %f \n", pr); getch();
}
void display()
{
int i; for(i=0;i<m;i++)
printf("%d\t",fr[i]);
printf("\n");
}

33

Page 38
 OUTPUT:
Enter length of the reference string: 12
Enter the reference string: 1 2 3 4 1 2 5 1 2 3 4 5
Enter no of frames: 3
1 -1 -1
1 2 -1
123
124
124
124
125
125
125
325
425
425
Number of page faults : 7 Page fault rate = 58.333332

VIVA QUESTIONS
1) What is meant by page fault?
2) What is meant by paging?
3) What is page hit and page fault rate?
4) List the various page replacement algorithm
5) Which one is the best replacement algorithm?

34

Page 39
 EXPERIMENT.NO 7
DEAD LOCK AVOIDANCE

AIM: To Simulate bankers algorithm for Dead Lock Avoidance (Banker‘s Algorithm)

DESCRIPTION:
Deadlock is a situation where in two or more competing actions are waiting f or the other
to finish, and thus neither ever does. When a new process enters a system, it must declare the
maximum number of instances of each resource type it needed. This number may exceed the
total number of resources in the system. When the user request a set of resources, the system
must determine whether the allocation of each resources will leave the system in safe state. If
it will the resources are allocation; otherwise the process must wait until some other process
release the resources.
Data structures
n-Number of process, m-number of resource types.
Available: Available[j]=k, k – instance of resource type Rj is available. Max: If
max[i, j]=k, Pi may request at most k instances resource Rj.
Allocation: If Allocation [i, j]=k, Pi allocated to k instances of resource Rj Need: If
Need[I, j]=k, Pi may need k more instances of resource type Rj, Need[I, j]=Max[I, j]-
Allocation[I, j];
Safety Algorithm
1. Work and Finish be the vector of length m and n respectively, Work=Available and
Finish[i] =False.
2. Find an i such that both
Finish[i] =False
Need<=Work If no such I
exists go to step 4.
3. work= work + Allocation, Finish[i] =True;
4. if Finish[1]=True for all I, then the system is in safe state.
Resource request algorithm
Let Request i be request vector for the process Pi, If request i=[j]=k, then process Pi
wants k instances of resource type Rj.
1. if Request<=Need I go to step 2. Otherwise raise an error condition.
2. if Request<=Available go to step 3. Otherwise Pi must since the resources are
available.
3. Have the system pretend to have allocated the requested resources to process Pi by
modifying the state as follows;
Available=Available-Request I;
Allocation I=Allocation +Request I;
Need i=Need i- Request I;
If the resulting resource allocation state is safe, the transaction is completed and process Pi is
allocated its resources. However if the state is unsafe, the Pi must wait for Request i and the
old resource-allocation state is restored.

35

Page 5
 ALGORITHM:
1. Start the program.
2. Get the values of resources and processes.
3. Get the avail value.
4. After allocation find the need value.
5. Check whether its possible to allocate.
6. If it is possible then the system is in safe state.
7. Else system is not in safety state.
8. If the new request comes then check that the system is in safety.
9. or not if we allow the request.
10. stop the program.
11. end

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
#include<string.h>
void main()
{
int alloc[10][10],max[10][10];
int avail[10],work[10],total[10];
int i,j,k,n,need[10][10];
int m;
int count=0,c=0;
char finish[10];
clrscr();
printf("Enter the no. of processes and resources:");
scanf("%d%d",&n,&m);
for(i=0;i<=n;i++)
finish[i]='n';
printf("Enter the claim matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&max[i][j]);
printf("Enter the allocation matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&alloc[i][j]);
printf("Resource vector:");
for(i=0;i<m;i++)
scanf("%d",&total[i]);
for(i=0;i<m;i++)
avail[i]=0; for(i=0;i<n;i++)
36

Page 5
for(j=0;j<m;j++)
avail[j]+=alloc[i][j];
for(i=0;i<m;i++)
work[i]=avail[i];
for(j=0;j<m;j++)
work[j]=total[j]-work[j];
for(i=0;i<n;i++)
for(j=0;j<m;j++)
need[i][j]=max[i][j]-alloc[i][j];
A:
for(i=0;i<n;i++)
{
c=0;
for(j=0;j<m;j++)
if((need[i][j]<=work[j])&&(finish[i]=='n'))
c++;
if(c==m)
{
printf("All the resources can be allocated to Process %d", i+1);
printf("\n\nAvailable resources are:");
for(k=0;k<m;k++)
{
work[k]+=alloc[i][k];
printf("%4d",work[k]);
}
printf("\n");
finish[i]='y';
printf("\nProcess %d executed?:%c \n",i+1,finish[i]);
count++;
}
}
if(count!=n)
goto A;
else
printf("\n System is in safe mode");
printf("\n The given state is safe state");
getch();
}

37

Page 5
 Enter the no. of processes and resources: 4 3
Enter the claim matrix:
322
613
314
422
Enter the allocation matrix:
100
612
211
002
Resource vector:9 3 6
All the resources can be allocated to Process 2
Available resources are: 6 2 3
Process 2 executed?:y
All the resources can be allocated to Process 3 Available resources
are: 8 3 4
Process 3 executed?:y
All the resources can be allocated to Process 4 Available resources
are: 8 3 6
Process 4 executed?:y
All the resources can be allocated to Process 1
Available resources are: 9 3 6
Process 1 executed?:y
System is in safe mode
The given state is safe state

VIVA QUESTIONS
1) What is meant by deadlock?
2) What is safe state in banker’s algorithms?
3) What is banker’s algorithm?
4) What are the necessary conditions where deadlock occurs?
5) What are the principles and goals of protection?

38

Page 5
EXPERIMENT.NO 8
AIM: To Write a C program to simulate disk scheduling algorithms
a) FCFS b) SCAN c) C-SCAN

DESCRIPTION
One of the responsibilities of the operating system is to use the hardware efficiently. For the
disk drives, meeting this responsibility entails having fast access time and large disk
bandwidth. Both the access time and the bandwidth can be improved by managing the order in
which disk I/O requests are serviced which is called as disk scheduling. The simplest form of
disk scheduling is, of course, the first-come, first-served (FCFS) algorithm. This algorithm is
intrinsically fair, but it generally does not provide the fastest service. In the SCAN algorithm,
the disk arm starts at one end, and moves towards the other end, servicing requests as it reaches
each cylinder, until it gets to the other end of the disk. At the other end, the direction of head
movement is reversed, and servicing continues. The head continuously scans back and forth
across the disk. C-SCAN is a variant of SCAN designed to provide a more uniform wait time.
Like SCAN, C-SCAN moves the head from one end of the disk to the other, servicing requests
along the way. When the head reaches the other end, however, it immediately returns to the
beginning of the disk without servicing any requests on the return trip

PROGRAM

A) FCFS DISK SCHEDULING ALGORITHM

#include<stdio.h>
main()
{
int t[20], n, I, j, tohm[20], tot=0; float avhm;
clrscr();
printf(“enter the no.of tracks”);
scanf(“%d”,&n);
printf(“enter the tracks to be traversed”);
for(i=2;i<n+2;i++)
scanf(“%d”,&t*i+);
for(i=1;i<n+1;i++)
{
tohm[i]=t[i+1]-t[i];
if(tohm[i]<0)
tohm[i]=tohm[i]*(-1);
}
for(i=1;i<n+1;i++)
tot+=tohm[i];
avhm=(float)tot/n;
printf(“Tracks traversed\tDifference between tracks\n”);
for(i=1;i<n+1;i++)
printf(“%d\t\t\t%d\n”,t*i+,tohm*i+);
printf("\nAverage header movements:%f",avhm);
getch();
} 3
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184

OUTPUT
Tracks traversed Difference between tracks
55 45
58 3
60 2
70 10
18 52
90 72
150 60
160 10
184 24

Average header movements:30.888889

4
B) SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter the tracks");
for(i=2;i<n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<n+2;i++)
{
for(j=0;j<(n+2)-i-1;j++)
{
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp;
}}}
for(i=0;i<n+2;i++)
if(t[i]==h)
j=i;k=i;
p=0;
while(t[j]!=0)
{
atr[p]=t[j]; j--;
p++;
}
atr[p]=t[j];
for(p=k+1;p<n+2;p++,k++)
atr[p]=t[k+1];
for(j=0;j<n+1;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("\nAverage header movements:%f",(float)sum/n);
getch();}
4
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184
OUTPUT
Tracks traversed Difference between tracks

150 50
160 10
184 24
90 94
70 20
60 10
58 2
55 3
18 37

Average header movements: 27.77

4
 C) C-SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter total tracks");
scanf("%d",&tot);
t[2]=tot-1;
printf("enter the tracks");
for(i=3;i<=n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<=n+2;i++)
for(j=0;j<=(n+2)-i-1;j++)
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp
}
for(i=0;i<=n+2;i++)
if(t[i]==h);
j=i;break;
p=0;
while(t[j]!=tot-1)
{
atr[p]=t[j];
j++;
p++;
}
atr[p]=t[j];
p++;
i=0;
while(p!=(n+3) && t[i]!=t[h])
{
atr[p]=t[i]; i++;
p++;
}

4
 for(j=0;j<n+2;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("total header movements%d",sum);
printf("avg is %f",(float)sum/n);
getch();
}

4
INPUT
Enter the track position : 55 58 60 70 18 90 150 160 184
Enter starting position : 100

OUTPUT

Tracks traversed Difference Between tracks

150 50
160 10
184 24
18 240
55 37
58 3
60 2
70 10
90 20
Average seek time : 35.7777779