L510
Advanced Micro Drive
1/4-1 HP (115V) n
1/4-3 HP (230V) n
1-3 HP (460V)
Features & Highlights
• Cost effective drive solution with wide
range of programming capabilities CONTROL FEATURES
• 1-16kHz carrier frequency (adjustable)
• Control Methods Available: • Acceleration/ deceleration ramps with S curves
- V/F mode or Sensorless Vector Operation • Sensorless Vector mode
• DC injection braking
• Parameters grouped by function
100-120VAC +10%, -15%
• Power Range: Input Voltage Range 200-240VAC +10%, -15%
115V, 1Ø (0.25 to 1 HP) 380-480VAC +10%, -15%
230V, 1Ø (0.25 to 3 HP)
230V, 3Ø (0.5 to 3 HP) PROTECTION FEATURES
460V, 3Ø (1 to 3 HP) Overload Up to 150%, 1 minute
• PID Process Control Loop Stall Prevention On acceleration, deceleration and constant speed
- Sleep Mode Overcurrent Instantaneous above 200%
- 0-10VDC or 4-20mA Feedback DC BUS 115/ 230V input: >410VDC
Overvoltage 460V input: >810VDC
- Loss of feedback or tracking detection DC BUS 115/ 230V input: <190 VDC
• Built-in Modbus or BACnet Protocols Undervoltage 460V input: <380 VDC
(RJ45 Interface) Ground Fault, Phase Loss, Overtemperature, Loss
Other protection
• 5 Digit operator’s keypad of PID Feedback External fault setting
- Scalable Display
ENVIRONMENTAL FEATURES
- Programming parameters
Operating Temperature 14–122°F (-10–50°C)
- Diagnostics monitoring
Storage Temperature -4–122°F (-20–50°C)
• Built-in Speed Pot
Humidity 95% RH or less (non-condensing)
• Digital and Analog Inputs - Outputs have
20 HP or less; 1g (32.2 ft/sec2)
extremely fast (~4 msec) update time Shock
20-25 HP; 0.6g (19.3 ft/sec2)
Complies with IEC 60018-2-78,
Certification
UL, cUL, CE, & RoHS
Keypad
5-Digit LED
Display View Parameters, Run
Speed, and Diagnostics
Status
Direction Indicator
Indicator
Speed
6 Button
Potentiometer
Keypad
Wiring Diagram
P, BR for 460V series
Main
Switch
Fuse
L1(L)
Power Inverter T1
AC Power L2 input output T2 M
source
T3
L3(N)
Ground
Ground
1:Data+
2:Data-
CON2
3:Data+
S1 RS485 4:Reserved
5:Reserved
S2 Pin 1 to Pin 8 6:Data-
Multi-function input S3 7:5V
8:GND
S4
RA Relay output
S5
250VAC/1A
COM (30VDC/1A)
RB
+ 10V
Frequency AVI (0~10V) AO +
reference or PID ACI (0~20mA) AO
AGND -
- AGND Multi-function output
0~10V
RA RB COM S1 S2 S3 S4 S5 10V AVI ACI AO AGND
TERMINAL SYMBOLS TM1 FUNCTION DESCRIPTION
L1(L)
Main power input, L1(L)/L2/L3(N)
L2
Single Phase L1(L)/L3(N)
L3(N)
P*
Externally connected braking resistor
BR*
T1
T2 Inverter output, connect to U, V, W terminals of motor
T3
Ground Terminal
RA/ RB Relay output terminal, Specification: 250VAC/1A(30VDC/1A)
COM S1-S5 (Common-NPN Type)
S1, S2, S3, S4, S5 Multi-function input terminals
10V Built-in power for external speed potentiometer
AVI Analog voltage input, Specification: 0-10VDC/ 2-10V
ACI Analog current input, Specification: 0/4-20mA
AO Multi-function analog output terminal. Maximum output 10VDC/1mA
AGND Analog ground terminal
*P, BR for 460V series
I/O FEATURES SPECIFICATIONS
• Qty 5 configurable Control Mode V/Hz , Sensorless Vector (SLV)
• Over 18 available selections
Frequency Range 0-599Hz
• Assign as normally open or
Digital Inputs normally closed Frequency Digital Input .01Hz
• 24V Power supply power Accuracy Analog input: 0.1%
(internal) Starting Torque 150%/1Hz (SLV)
• Qty 1 relay output with over Overload
15 available selections Tolerance Rated 150%/1minute
Digital Output • Assign as normally open or Output Current
normally closed ^
• Frequency setting with ^, keys
• Qty 2 analog input channels • Potentiometer on keypad
Frequency
- 1 at 0-10VDC • External input terminals
Settings
- 1 at 4-20mA - AV1 (0-10V) - AC1 (0/4-20ma)
Analog Inputs
• Adjustable gain and bias on • Multifunction Input (Up/Down)
each channel
• Two sets of acceleration and
• 0-10VDC deceleration times
Acceleration
• 5 available configurations - Jog acceleration
Settings
- Output Frequency - deceleration settings
- Set Frequency • (0-3600 sec)
Analog Output - Output Current
- Output Voltage Voltage/ • Qty 6 preset V/Hz patterns plus
- DC Bus Voltage Frequency user settable V/F pattern
• Adjustable gain and bias Characteristics • Adjustable voltage (torque) boost
A compact and dynamic drive that is well-suited for these applications:
MACHINES/EQUIPMENT INDUSTRIES
• Fans
• Food and Beverages
• Pumps
• HVAC
• Mixers
• Machine Tools
• Treadmills
• Packaging
• AC contactor replacement
TECO-Westinghouse Motor
Company offers an extensive line
of Variable Speed Drives and Soft
Starters for your motor control
applications.
We also offer a wide variety
of motors that are matched
with the Drives and Soft
Starters including Vertical
Hollow Shaft, Rolled Steel, and
NEMA Premium Efficient motors.
From “in stock” controls to engineered systems, we can provide you the right control
solution including an extensive line of TECO-Westinghouse AC Motors.
www.tecowestinghouse.com 800-279-4007
Drive Ratings
All Digital Inputs are Sinked to Control Power Common
115V 1-Phase Input/ 3-Phase 230V Output
HP DRIVE AMPS RATED APPLIED
MODEL NO. AC INPUT CURRENT
CONSTANT TORQUE CONSTANT TORQUE CAPACITY (KVA) MOTOR (kW)
L510-1P2-H1-U .25 1.8 9.5 0.68 0.2
L510-1P5-H1-U .50 2.6 13 1.00 0.4
L510-101-H1-U 1 4.3 19 1.65 0.75
230V 1-Phase Input/ 3-Phase Output
HP DRIVE AMPS RATED APPLIED
MODEL NO. AC INPUT CURRENT
CONSTANT TORQUE CONSTANT TORQUE CAPACITY (KVA) MOTOR (kW)
L510-2P2-H1-U .25 1.8 4.9 0.68 .2
L510-2P5-H1-U .50 2.6 7.2 1.00 .4
L510-201-H1-U 1 4.3 11.0 1.65 .75
L510-202-H1-U 2 7.5 15.5 2.90 1.5
L510-203-H1-U 3 10.5 21 4.00 2.2
230V 3-Phase Input/ 3-Phase Output
HP DRIVE AMPS RATED APPLIED
MODEL NO. AC INPUT CURRENT
CONSTANT TORQUE CONSTANT TORQUE CAPACITY (KVA) MOTOR (kW)
L510-2P5-H3-U .50 2.6 4.0 1.00 .4
L510-201-H3-U 1 4.3 6.4 1.65 .75
L510-202-H3-U 2 7.5 9.4 2.90 1.5
L510-203-H3-U 3 10.5 12.2 4.00 2.2
460V 3-Phase Input/ 3-Phase Output
HP DRIVE AMPS RATED APPLIED
MODEL NO. AC INPUT CURRENT
CONSTANT TORQUE CONSTANT TORQUE CAPACITY (KVA) MOTOR (kW)
L510-401-H3-U 1 2.3 4.2 1.7 .75
L510-402-H3-U 2 3.8 5.6 2.9 1.5
L510-403-H3-U 3 5.2 7.3 4.0V 2.2
Braking Resistors
460V 3-Phase *
AC DRIVE HP resistance RESISTOR BRAKING DUTY CYCLE
model no. qty
RATING ohms - watts dimensions (in.) TORQUE (%) (%)
1 JNBR-150W750 1 750 150 12"L x 5"W x 5"D 126 10
2 JNBR-150W400 1 400 150 12"L x 5"W x 5"D 119 10
3 JNBR-260W250 1 250 260 12"L x 5"W x 5"D 126 10
Notes:
Transistor built-in for all L510 460V ratings only (braking resistors externally mounted)
Options
Part NUMBER Description
JN5-CB-01M Extension wire (1M)
JN5-CB-02M Extension wire (2M)
JN5-CB-03M Extension wire (3M)
JN5-CB-05M Extension wire (5M)
JN5-CM-USB USB cable to connect to PC
JN5-CU Copy Module/ Remote Digital Display
JN5-DIN-L01 DIN RAIL, L510 Frame 1
DINE2-201 DIN RAIL, L510 Frame 2
Dimensional Diagrams
W1
D2
H2
H1
D1
D
W2
W
Units: inches (mm)
Model W W1 W2 H H1 H2 D D1 Weight
L510-1P2-H1-U
L510-1P5-H1-U
L510-2P2-H1-U
2.83 2.48 2.40 5.55 5.16 4.80 5.48 5.35 2.0lbs
L510-2P5-H1-U
(72) (63) (61) (141) (131) (122) (139.2) (136) (0.9kg)
L510-201-H1-U
L510-2P5-H3-U
L510-201-H3-U
W1
D2
H2
H
H1
D1
W2
W
Units: inches (mm)
Model W W1 W2 H H1 H2 D D1 Weight
L510-101-H1-U
L510-202-H1-U
L510-203-H1-U
L510-202-H3-U 4.65 4.25 4.25 5.67 5.16 4.76 5.80 5.68 3.52lbs
L510-203-H3-U (118) (108) (108) (144) (131) (121) (147.3) (144.2) (1.6kg)
L510-401-H3-U
L510-402-H3-U
L510-403-H3-U
