TOOLBOX PLUS™

DIAGNOSTIC SOFTWARE - USER GUIDE

MM19047
Edition 1 This publication is not subject to any update service. Information contained in this publication was in effect
Version 2 (08.2020) at the time the publication was approved for printing and is subject to change without notice or liability.
WABCO reserves the right to revise the information presented or to discontinue the production of parts
MM19047 (en)
described at any time.
GENERAL INFORMATION

General Information

Symbols Used in this Document

DANGER
Description of an immediate situation which will result in irreversible injury or death if the warning is
ignored.

WARNING
Description of a possible situation which may result in irreversible injury or death if the warning is ignored.

CAUTION
Description of a possible situation which may result in irreversible injury if the warning is ignored.

NOTICE
Description of a possible situation which may result in material damage if the warning is ignored.

Important information, notices and/or tips

Reference to information on the Internet

3
 GENERAL INFORMATION

How to Obtain Additional Maintenance, Service and Product Information

If you have any questions about the material covered in this publication, or for more information about the WABCO product line,
please contact the WABCO Customer Care Center at 855-228-3203, by email at [email protected], or visit
our website: www.wabco-na.com.
Refer to the Society of Automative Engineers (SAE) website to find all current SAE documents and standards applicable to
WABCO products (such as SAE J447 and SAE J908 at www.sae.org).
Refer to the National Highway Traffic Safety Administration (NHTSA) website to find all current documents referenced in the
manual at www.nhtsa.gov.

WABCO TOOLBOX PLUS™ Software

TOOLBOX PLUS™ Software provides PC diagnostics for WABCO products and can be purchased and downloaded from
https://wabco.snapon.com/.
This Software User’s Guide, MM19047 can be obtained by visiting www.wabco-na.com/literature.

WABCO ACADEMY

www.wabco-academy.com

WABCO Online Product Catalog

www.wabco-customercenter.com/

Your Direct Contact to WABCO

WABCO North America LLC

WABCO USA LLC
1220 Pacific Drive
Auburn Hills, MI 48326
Customer Care Center: (855) 228-3203
www.wabco-na.com

4
SAFETY INFORMATION
Safety Information
Provisions for a safe work environment

„ Only trained and qualified automotive technicians may carry out work on the vehicle.
„ Read this publication carefully.
„ Follow all warnings, notices and instructions to avoid personal injury and property damage.
„ Always abide by the vehicle manufacturer’s specifications and instructions.
„ Observe all accident regulations of the respective company as well as regional and national regulations.
„ The workplace should be dry, sufficiently lit and ventilated.
„ Use personal protective equipment if required (safety shoes, protective goggles, respiratory protection and
ear protectors).
Read and observe all Danger, Warning and Caution hazard alert messages in this publication. They provide information that can
help prevent serious personal injury, damage to components, or both.

WARNING
To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service.

WARNING
Park the vehicle on a level surface. Block the wheels to prevent the vehicle from moving. Support the vehicle with safety
stands. Do not work under a vehicle supported only by jacks. Jacks can slip or fall over. Serious personal injury and damage
to components can result.

5
 TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

TOOLBOX PLUS™ TOOLBOX PLUS™ SOFTWARE INSTALLATION

To ensure users have access to the most up to date
diagnostic information on WABCO products and maintain full
functionality of TOOLBOX PLUS™ software, the computer
where the TOOLBOX PLUS™ software is installed must be
connected to the Internet every 90 days. If the computer
is not connected to the internet every 90 days, TOOLBOX
PLUS™ will stop working. Please contact Snap-On at (800)
639- 6774 to reactivate your software.
When your TOOLBOX PLUS™ subscription is nearing
renewal, the software provides automatic notifications of
the approaching renewal deadline beginning 60 days before
expiration. If a user allows the subscription to expire, the
TOOLBOX PLUS™ provides computer-based diagnostics TOOLBOX PLUS™ application will stop working. Please
for WABCO electronic vehicle control system products. contact Snap-On at (800) 639- 6774 to reactivate your
The program displays information for the vehicle systems, software.
displays active and stored diagnostic trouble codes, repair When installing TOOLBOX PLUS™ it is highly recommended
instructions and activates system components to verify you close or disable any other currently running programs
system integrity. including anti-virus. Some operating systems or corporate
For complete WABCO maintenance information, policies restrict the installation of software to users without
refer to the appropriate maintenance manual by full administrative rights. Check with your IT department to
visiting our Literature Center at verify that you have the appropriate administrative rights
www.wabco-na.com/literature to continue with the Installation. For Windows 7, 8, or 10,
ensure the following:
1. The person installing the adapter drivers and TOOLBOX
TOOLBOX PLUS™ SYSTEM REQUIREMENTS PLUS™ Software must be logged in as “Administrator”.
Prior to downloading TOOLBOX PLUS™, please verify 2. The adapter drivers and TOOLBOX PLUS™ must be
that your computer and hardware meet the minimum installed on the machine for “ALL USERS”, and not just
requirements outlined in the System Requirements Guide the current user.
below. 3. Answer the prompts that appear during setup. TOOLBOX
Component Requirement PLUS™ will acknowledge a successful installation and
Computer and PC: 1 gigahertz (GHz) or faster x32-bit or x64- automatically open the software registration process.
Processor bit processor When prompted to select between Save and Run, select
the Save option. Save the file to an easy-to-access area
Memory PC: 1 GB RAM (32-bit); 2 GB RAM (64-bit)
on the computer, such as the desktop.
Hard Disk PC: 300 MB of available disk space 4. Do not attempt to install the software until the
Standard VGA graphics adapter 800 x 600 download is completed.
Display
screen resolution or higher
Operating TOOLBOX PLUS™ should be installed under
PC: Windows 7, Windows 8, Windows 10 “Administrator” with full rights for “All Users”. Please
System check with your IT department. Some PCs may
Framework PC: Microsoft.NET 4.8 or later require the temporary disabling of Windows UAC (User
Access Control) for the downloading and installation
Hardware Interface Requirements: Vehicle Diagnostic Adapter of TOOLBOX PLUS™ software. Temporarily disabling
Macintosh and Linux operating systems are not supported. UAC settings may be required to resolve certain
download and installation issues related to individual
Windows® is a registered trademark of the Microsoft PC configurations prior to TOOLBOX PLUS™ software
Corporation. installation.
6
TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

2. When prompted to select between “Save” and Run,”

DISABLING WINDOWS UAC (User Access Control) select the “Save” option and save the file to your
desktop.
Disabling UAC on Windows 7, 8, 10
Type “UAC” into the Start Menu Control Panel search box. In Firefox, you will see this message:
Select “Change User Account Control Settings” or simply
press the Enter key.

In the dialogue box that appears, drag the slider down to the
“Never Notify” position and then select OK.

In Internet Explorer, you will see this message:

Save the file to the computers such as the desktop

3. After the files are saved, open the folder. Select “Run”
which begins the setup/installation process

TOOLBOX PLUS™ INSTALLATION

Install TOOLBOX PLUS™ Software
1. After completing your purchase from the
wabco.snapon.com website, click on the blue product
key number to start the software download.

7
 TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

4. As each process is completed, click “Next” to continue You may restore the UAC setting to the desired selection
after the installation of the TOOLBOX PLUS™ software is
complete. Rebooting the PC/Laptop will reset the UAC back
to the original setting.

Subscription Registration
User will need to register the TOOLBOX PLUS™ subscription
before the TOOLBOX PLUS™ application will work. After
the TOOLBOX PLUS™ software completes installation a
registration window will open to register your subscription.
WABCO recommends that an IT support systems person or a
manager registers the software. This is due to the fact that a
5. Read the End User License Agreement (“EULA”). If you
agree with its terms, please select “I agree” with the Login and Password will need to be created to register your
terms of the software agreement”, and then click on subscription. PC/Laptop must be connected to the internet
“Next” to continue the installation process. for the registration process. User will click “I don’t have an
account” on the registration screen.
If the user does not agree with the EULA then click “I
do not agree with the terms of the license agreement”.
Then click cancel to stop the installation of the TOOLBOX
PLUS™ software. User can contact the WABCO
Customer Care Center at (855) 228-3203 to review the
EULA Agreement and their concerns.

A “create account” screen will open for the user.

6. After clicking on “Next”, the files begin downloading.

A confirmation window will pop up on the screen.
Click “Finish” to complete the process and launch the
TOOLBOX PLUS™.

8
TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

After completing the online instructions to create an account, registration was successful
the user will receive an email to activate the registration
account.

User will click “close” and the TOOLBOX PLUS™ application

will open.
Then select the TOOLBOX PLUS™ icon on your desktop to
open the application.
User will need to select the Adapter Button to assign the
RP1210 adapter being used.
Registration Login screen will open; enter your login ID and
password on this screen.

ADAPTER HARDWARE SETUP

Next a Product Key screen will open. The user will need to
type the product key and serial number provided with the A diagnostic RP1210 adapter is required for communications
software subscription. between the vehicle’s hardware and TOOLBOX PLUS™
software.

• Establish a connection between the computer’s USB and

the RP1210 diagnostic adapter.
• Establish connection between the diagnostic adapter and
the vehicle’s SAE diagnostic interface connector.

Please refer to your hardware manufacturer’s installation and

connection procedures. Please ensure you have the latest
software, drivers and firmware for your diagnostic tool. The
diagnostic adapter is available for selection by clicking on the
“Adapter Selection” Icon at the top of page.

User will click register and a message will pop up indicating

9
 TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

Subscription Registration Timeline

TOOLBOX PLUS™ is a subscription based software. The
subscription starts when the user registers the TOOLBOX
PLUS™ software. TOOLBOX PLUS™ has provisions to
remind the user prior to expiration of the subscription. The
user will receive a message one time at 60 days and 30
days.

TOOLBOX PLUS™ diagnostic software is only

operational with WABCO electronic vehicle
control products. A list of common RP1210
Compliant Adapters known to operate with WABCO When there is only 7 days left the user will receive a
diagnostics application software is below. Please message every time the TOOLBOX PLUS™ application
contact the manufacturer directly or visit their opens as well as an email reminder that the subscription is
website to determine your specific diagnostic about to expire. On day 0 the user will receive a message
needs. when opening the TOOLBOX PLUS™ application that the
subscription has expired. The user will have a 30 day grace
period before the TOOLBOX PLUS™ application stops
RP1210 Compliant Device List: working.
Noregon Device:
• www.noregon.com

Nexiq Device List:

• www.nexiq.com

Dearborn Group Device List:

• www.dgtech.com

WABCO neither promotes nor recommends any After the 30 day grace period expires, the user will get a
specific manufacturer’s diagnostic adapters. message that the subscription has expired and will need to
purchase another subscription to be able to continue to use
the TOOLBOX PLUS™ application. The user will need to go to
https://wabco.snapon.com to purchase a new subscription.

10
TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

TOOLBOX PLUS™ MAIN SCREEN Warranty Submission Form

Starting TOOLBOX PLUS™ Software The Warranty Submission form can be accessed using
the button on the Main Menu. When the user selects the
To open the TOOLBOX PLUS™ main menu, click the icon on
Warranty Submission Form button TOOLBOX software will
your computer’s desktop.
link the user to an online website which allows the user to
complete the form, attach DTC Reports, Parameter Files,
OnGuard Decoder File, etc. This then can be emailed to
[email protected].

Truck/Tractor/Bus (J1939) Main Menu

Truck/Tractor/Bus (J1939) menu
provides access to the TOOLBOX
PLUS™ SAE J1939 Tractor
diagnostics for WABCO
J1939 ABS-equipped vehicles.

This application displays

information for testing, displays active and stored diagnostic
trouble codes, provides appropriate repair instructions and
also provides a means to activate system components,
The main menu provides multiple selections for testing verifying system integrity.
and diagnosing WABCO systems. Each selection opens
an independent diagnostic software package. Clicking the ECAS (OptiRide)
System tab at the top of the main screen will provide a drop
down menu with an Adapter Selection and Exit option which Selecting the ECAS (OptiRide) from the
will allow the user to select the RP1210 adapter that is menu opens the TOOLBOX PLUS™
being used or to close the TOOLBOX PLUS™ application. diagnostics for WABCO ECAS-equipped
This will return the user back to their desktop. vehicles. This application displays information from the
vehicle ECAS system, displays diagnostic trouble codes and
Expanded Menu provides a means to activate system components, ride height
The Expanded Menu allows the user to select WABCO CAN programming and verify system integrity.
(J1939), WABCO J1708 applications and WABCO Trailer
applications. Hydraulic ABS (SmartTrac)

Within the main menu the user can Selecting the Hydraulic ABS (SmartTrac)
select the specific WABCO system to be from the menu opens the TOOLBOX
diagnosed. An additional feature in PLUS™ diagnostics for WABCO SmartTrac-
the menu is when TOOLBOX software is equipped vehicles. This application displays
first opened the software will detect all information from the vehicle’s SmartTrac system, displays
WABCO hardware installed on the vehicle. diagnostic trouble codes and provides a means to activate
The text in the menu will highlight in system components and verify system integrity.
GREEN or RED or GRAY. If the hardware is
not present the text will remain GRAY. If the text in the menu OnGuard®
is GREEN then there are no active faults in that hardware. If Selecting the OnGuard from the drop menu
the text in the menu is RED then there are active faults in opens the TOOLBOX PLUS™ diagnostics for
that hardware. WABCO OnGuard equipped vehicles. This
11
 TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

application displays information from the radar, displays from the vehicle ECAS system, displays active and stored
active and stored diagnostic fault codes, provides access to diagnostic fault codes, provides a means to activate system
decoder and parameter files, and verifies system integrity. components, and verifies system integrity.

OnLane® Hydraulic ABS

Selecting the OnLane from the menu opens Selecting Hydraulic ABS from the menu opens the TOOLBOX
TOOLBOX PLUS™ diagnostics for WABCO PLUS™ SAE J1708 Hydraulic ABS diagnostics for WABCO
OnLane-equipped vehicles. This application hydraulic ABS-equipped vehicles. This application displays
displays WABCO hardware information and information from the vehicle’s ABS system, displays active
allows the user to read diagnostic trouble codes, and stored diagnostic fault codes, provides appropriate
test start-up tones, set the system volume and perform repair instructions and provides a means to activate system
various system tests. components, verifying system integrity.

OnSide® Pneumatic ABS

Selecting the OnSide from the menu opens the TOOLBOX Selecting Pneumatic ABS from the menu opens the
PLUS™ diagnostics for WABCO OnSide TOOLBOX PLUS™ SAE J1708 Tractor diagnostics for
equipped vehicles. This application displays WABCO ABS-equipped vehicles. This application displays
information from the radar, diagnostic information from the vehicle’s ABS system, displays active
trouble codes and verifies system integrity. and stored diagnostic fault codes, provides appropriate
repair instructions and provides a means to activate system
Pneumatic ABS/EBS components, verifying system integrity.
Selecting the Pneumatic ABS/EBS from the
menu opens the TOOLBOX PLUS™ diagnostics Trailer [PLC I J1939 I J1708]
for WABCO Pneumatic ABS or EBS-equipped Trailer (PLC/J1939/J1708) provides access to diagnostic
vehicles. This application displays information from support for trailers equipped
the Pneumatic ABS or EBS, provides diagnostic with WABCO iABS and
trouble codes, verifies system integrity, provides appropriate Enhanced Easy-Stop ABS,
repair instructions and activates system components. The Roll Stability Support (RSS)
information varies based on which ABS system the vehicle is and TailGUARD.
equipped with.
If connecting directly to the ABS ECU on the trailer
through a diagnostic cable, verify the protocol is set
J1708 DIAGNOSTICS to J1708/J1939. Not setting the communication
TOOLBOX PLUS™ J1708 Main Menu protocol will result in no communication with the
The Truck/Tractor/Bus (J1708) Trailer ABS. If you are connecting at the 7-way
in TOOLBOX PLUS™ menu (J2497) nose connector make sure your protocol
provides multiple selections is set to PLC or the user will not be able to connect
for testing and diagnosing to the Trailer ABS ECU. This application displays
WABCO SAE J1708 systems. Each selection opens an information from the Trailer ABS System, provides
independent diagnostic software package. active and stored diagnostic fault codes, provides
appropriate repair instructions and provides the
means to activate system components to verify
ECAS-Truck & Bus
system integrity.
Selecting ECAS-Truck & Bus from the menu opens the
TOOLBOX PLUS™ SAE J1708 ECAS diagnostics for WABCO
ECAS equipped vehicles. This application displays information
12
TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

Trailer ABS adapter, select the Utilities icon to open the Utilities Menu.
Selecting Trailer ABS from the menu displays information
from the Trailer ABS System, displays active and stored Your specific adapter is only available if it is a
diagnostic fault codes, provides appropriate repair compatible device and the software drivers have
instructions and provides the means to activate system been installed correctly. If your device is not listed,
components to verify system integrity. please re-install the appropriate adapter drivers
or contact the manufacturer. Vendor name and
TailGUARD™ specifics should appear on the parts label of the
adapter or its documentation.
Selecting TailGUARD™ from the menu displays information
for the TailGUARD™ System, displays active and stored
diagnostic fault codes, provides appropriate repair Vendor
instructions and provides the means to activate system Click the down arrow for a list of diagnostic tools whose
components, program components and verify system drivers have been correctly installed.
integrity.

Trailer RSS (Roll Stability Support)

Selecting Trailer RSS from the menu displays information
for the RSS System, displays active and stored diagnostic
fault codes, provides appropriate repair instructions and
provides the means to activate system components, program
components and verify system integrity.

Utilities & Task Bar

These icons are found at the top of the main menu screen of
TOOLBOX PLUS™. Each icon is labeled for its function.

Protocol
Click the down arrow for the protocol choices.

Adapter Selection
There are two ways a user can open the Adapter Selection
application. The first is using the Adapter Selection button
from the TOOLBOX PLUS™ Main Screen; the other is to
open the drop down menu under the System Tab.

These options provide the means to select and configure

the diagnostic adapter to be used. Please verify you have
Changing protocols during the use of TOOLBOX
the latest software driver and firmware for your specific
PLUS™ software requires an ignition or power
diagnostic tool. Driver and firmware updates are available
cycle. This is required to reset the hardware and
from your hardware manufacturer’s website or can be
establish communications.
purchased by calling them directly. To configure a diagnostic
13
 TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

Language Setting J1939 Bus Monitor

This option only functions for J1708 Truck, ECAS and Trailer.
To change the language, select the following:

This function allows the user to monitor J1939 Bus traffic at

Tab labeled Tractor ECU the Vehicle diagnostic connector.

ECAS ECU

Then select the “Language” option in the drop down menu.

Roll Call
Selecting the roll call function allows the user to check for
WABCO J1939 systems such as ABS and OnGuard.

14
TOOLBOX PLUS™ DIAGNOSTIC SOFTWARE

Aftermarket Programming Exit

Selecting the Aftermarket Programming option will open To close the application the User just selects the “EXIT” in the
the ABS ECU programming functionality for replacement System drop down menu at the top of the Main Menu.
electronic control unit (ECU) for an anti-lock brake system
(ABS). Service centers can now stock an inventory of
partially programmed ABS control units. Using the TOOLBOX
PLUS™ Aftermarket Programming application they can
quickly configure these parts for a wide variety of vehicles.

DTC & Maintenance Manual Lookup

Selecting this option provides a short cut to locate fault code
descriptions and access maintenance manuals. Note that all
maintenance manuals can also be found on
www.wabco-na.com/literature.

15
 For further product details contact your distributor or the
WABCO Customer Care Center at 855-228-3203.

About ZF Friedrichshafen AG
ZF is a global technology company and supplies systems for passenger cars, commercial vehicles and industrial technology,
enabling the next generation of mobility. ZF allows vehicles to see, think and act. In the four technology domains Vehicle
Motion Control, Integrated Safety, Automated Driving, and Electric Mobility, ZF offers comprehensive solutions for established
vehicle manufacturers and newly emerging transport and mobility service providers. ZF electrifies different kinds of vehicles.
With its products, the company contributes to reducing emissions and protecting the climate.

ZF, which acquired WABCO Holdings Inc. on May 29, 2020, now has 162,000 employees worldwide with approximately 260
locations in 41 countries. In 2019, the two then-independent companies achieved sales of €36.5 billion (ZF) and $3.4 billion
(WABCO). For more information, visit: www.wabco-na.com

© 2020 WABCO North America LLC– All rights reserved – MM19047 / 08.2020