Scribd
Upload
179 views1 page

MTR - HT# 52154

1) Hamilton Metals purchased 33 pieces of hot finished seamless alloy mechanical tubing from a manufacturer in Romania. 2) The tubing meets specifications for ASTM A 519 steel and has dimensions of 3.500” x 2.000” x 0.750” with a grade designation of 4140/4142/80 Y Q & T. 3) Chemical and mechanical test results for the tubing are provided, confirming the tubing meets the ordered specifications.

Uploaded by

Colin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views1 page

MTR - HT# 52154

1) Hamilton Metals purchased 33 pieces of hot finished seamless alloy mechanical tubing from a manufacturer in Romania. 2) The tubing meets specifications for ASTM A 519 steel and has dimensions of 3.500” x 2.000” x 0.750” with a grade designation of 4140/4142/80 Y Q & T. 3) Chemical and mechanical test results for the tubing are provided, confirming the tubing meets the ordered specifications.

Uploaded by

Colin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Hamilton Metals, //&

COD QC-3.1-Ed.2 REV 6/2017


QC: JG
6SHF: 4140-80
RR: 16934-1
Date: Aug 06, 2019

INSPECTION CERTIFICATE g EN 10204: 2004 / 3.1


No.: E10742 Manufacturer’s mark : Purchase Order No.: MO16934
Date: 07.06.2019
Buyer : Hamilton Metals

Specifications: ASTM A 519–2017 Dimensions: 3.500” x 2.000” x 0.750”


Spec. ES-MA-18-9, Rev. 0 Grade Designation : 4140/4142/80 Y Q & T
Description of Goods: MO16934
HOT FINISHED SEAMLESS ALLOY MECHANICAL TUBING
Heat No.: 52154 Lot No.: 368216 Country of manufacture: Romania Country of Melt: Romania
Quantity Pcs Length ft Weight lbs
33 757.87 16900.62
Ladle Chemical Analysis (%)
C Mn S P Si Ni Cr Mo Cu Al Nb Ti N V B
0.41 0.86 0.002 0.010 0.23 0.06 1.06 0.20 0.17 0.019 0.001 0.020 0.007 0.001 0.0004
Product Chemical Analysis (%)
C Mn S P Si Ni Cr Mo Cu Al Nb Ti V B
0.41 0.86 0.003 0.010 0.24 0.07 1.07 0.21 0.18 0.019 0.003 0.018 0.004 0.0006
0.40 0.84 0.003 0.010 0.23 0.07 1.08 0.21 0.18 0.018 0.003 0.018 0.004 0.0006
Mechanical Properties
TENSILE TEST (ASTM A370) Yield strength UTS Elongation in Reduction of
–at room temperature- 0.2%OFFSET/ PSI 2 in. area
Test Specimen: 0.5%EUL % %
Round longitudinal-mid wall / 0.5 inch PSI
Dimension – Specimen (inch): 1. 0.4969 / 2. 0.4992 1. 93200/93500 112000 22 67
Section – Specimen (inch2): 1. 0.1939 / 2. 0.1957
Length - Specimen (Lo) (inch): 1. 2 / 2. 2 2. 90000/90100 109000 23.5 67

Type of furnace used: Continuous heat treatment line, gas furnace Process of melting–electric arc furnace, fully killed vacuum degassed
The method for monitoring temperature: atmosphere thermocouples As-tempered surface Hardness BHN: 1. 231; 229
Heat treatment: As-tempered Hardness HRC max 22 (acc to NACE MR01.75/ISO 15156) (A.2.1.2.)
- austenitized at 1598ºF, 30 min 1. (21.30; 21.21; 19.98)-(21.59; 21.64; 21.22)-(21.22; 21.23; 20.93)-(21.19; 21.27; 20.73)
- quenched in water: the start temperature of quench media: 70°F 2. (19.95; 19.82; 20.17)-(20.21; 20.65; 19.92)-(20.30; 20.13; 20.06)-(20.16; 20.07; 19.53)
the end temperature of quench media: 73°F As-quenched Hardness HRC:
- tempered at 1337ºF, 76 min. (58.53; 56.84; 54.25)-(58.35; 56.56; 54.52)-(58.71; 56.82; 54.84) -(58.13; 56.34; 54.49)
- hot straightening; stress free at min 950°F: OK Grain size ASTM E 112 : 8.5
Charpy V – Notch: specimen: Reduction ratio: 5.89:1
Transversal (¾- size): Temperature [ 32º F ]: U.T.acc. to API 5CT 9 th Ed. Sec 10.15 Annex H & ASTM E213-2014 & ISO 10893-10
1. 72 (65; 66; 60) foot-pounds; 2. 72 (69; 72; 75) foot-pounds; (5% - notch) –full length, OD & ID, Longitudinal & Transversal: OK
Longitudinal (full size) : Temperature [ 14º F ]: U.T. of WT for min 25% of the surface, acc. to acc API 5CT 9th Annex H: OK
1. 100 (99; 99; 101) foot-pounds; 2. 101(98; 101; 103) foot-pounds Test MPI acc. ASTM E709-2015/ISO 10893-5-2011, full length, outside, longitudinal M2:OK
Test samples are from a prolongation of the tubes DI=5.53
Visual and dimensional inspection of the tubes were performed and the results were satisfactory
The manufacturer of pipes is certified in acc. with ISO 9001: 2015, ISO 14001:2015 and ISO 45001:2018
“ THIS PRODUCT IS FREE OF MERCURY CONTAMINATION “
“ NO REPAIR BY WELDING HAS BEEN CARRIED OUT “
QC & LABORATORIES CHIEF
Dipl. Eng. Silviu Barbulescu

MILL INSPECTOR
Eng. Iulian Andrei

This inspection certificate is digital signed.


The recording of false, fictitious or fraudulent statement or entries on this document, may be punishable as a
felony under Federal Statute title 18, chapter 47
THIS IS FOR CERTIFY THAT THE MATERIAL HEREIN DESCRIBED HAS BEEN MANUFACTURED WITH THE ORDERED SPECIFICATION AND THAT
INFORMATION IS CORRECT, THEY MEET THE SPECIFICATION’S REQUIREMENTS AND ARE RECORDS IN OUR COMPANY DOCUMENTS.

You might also like