Airbus Specification Nadcap Commodity CrossTable
Uploaded by
ahmed vlogsAirbus Specification Nadcap Commodity CrossTable
Uploaded by
ahmed vlogsAirbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
80-T-10-1000 FERTIGUNGSANWEISUNG ZIELSETZUNG out out
80-T-20-1000 FERTIGUNGSANWEISUNG FORM UND AUFBAU out out
80-T-20-3000 FERTIGUNGSANWEISUNG ERSTELLUNG FREIGABE ÄNDERUNG UND VERWALTUNG out out
80-T-21-0003 VERGLEICHSLISTE LYNX-HUBSCHRAUBER 80 ZU WHL out out
80-T-21-0005 VERGLEICHSLISTE GENERAL DYNAMICS SPECIFICATIONS & DA-ANWEISUNGEN out out
80-T-21-0008 VERGLEICHSLISTE FERTIGUNGSANWEISUNGEN EADS DEUTSCHLAND PROGRAMM EF2000/ AIRBUS DEUTSCHLAND out out
80-T-21-0009 GMBH
VERGLEICHSLISTE FH/DA ZU FA 80 out out
80-T-21-0010 WERKSTOFF-AUSTAUSCH-LISTE ( SUBSTITUTION ) out out
80-T-21-0011 RICHTLINIE FUER DIE EINTRAGUNG VON FAS IN FERTIGUNGSUNTERLAGEN out out
80-T-21-0013 VERGLEICHSLISTE, ANWEISUNGEN FAL A320-FAMILIE A-F/ A-UK/ A-D out out
80-T-21-0014 VERGLEICHSLISTE 80-T-FERTIGUNGSANWEISUNG & AIPS out out
80-T-22-1000 ERSTELLUNG VON ARBEITSPLAENEN out out
80-T-22-1001 FERTIGUNGSANWEISUNG PA8 - ARBEITSPLAN out out
80-T-22-1002 FERTIGUNGSANWEISUNG STAMMKARTE out out
80-T-22-1100 BAUTEILGEBUNDENE FERTIGUNGSANWEISUNG out out
80-T-22-1105 FERTIGUNGSVERFAHRENSVERGLEICH out out
80-T-22-2000 ERSTELLUNG VERWENDUNG UND DOKUMENTATION VON FERTIGUNGSAUFTRAEGEN out out
80-T-22-3000 ZEITWIRTSCHAFT out out
80-T-30-0032 USINAGE MÉCANIQUE DES COMPOSANTS EN MATÉRIAUX COMPOSITES RENFORCÉS PAR DES FIBRES COMP AC7118 PAR
80-T-30-0050 MACHINING OF GLARE ( SAWING, MILLING, DRILLING ) COMP AC7118 PAR
80-T-30-3001 BEARBEITUNG VON SINTERWERKSTOFFEN FÜR LAGER UND BUCHSEN out out
80-T-30-4010 MACHINING OF METALLIC COMPONENTS out out
80-T-30-6900 GRINDING OF TITANIUM out out
80-T-30-6912 GRINDING OF STEEL out out
80-T-30-6913 PRECISION GRINDING OF HARD CHROMIUM LAYERS ON STEEL out out
80-T-30-6918 FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING) out out
80-T-30-6919 VIBRATORY GRINDING out out
80-T-30-6922 ENTGRATEN VON INNENKONTUREN AN METALLISCHEN BAUTEILEN DURCH DRUCKFLIESSLAEPPEN ASA AC7135
80-T-30-9910 DRILLING, REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES ASA AC7135
80-T-31-2900 HANDLING OF REACTION RESIN COMPOUNDS COMP AC7118 PAR + CP
80-T-31-2905 HANDLING OF TEXTILE GLASS PRODUCTS COMP AC7118 PAR + CP
80-T-31-2909 FABRICATION DES COMPOSANTS SANDWICH COMP AC7118 PAR + CP
80-T-31-2910 MANUFACTURE OF STRUCTURAL FIBER-REINFORCED PLASTIC (FRP) COMPONENTS, GENERAL COMP AC7118 PAR + CP
80-T-31-2911 MANUFACTURE OF NON STRUCTURAL FRP COMPONENTS out out
80-T-31-2913 REMOVABLE OF EPOXY RESIN FROM MODULE CORES out out
80-T-31-2914 APPLICATION OF RELEASE AGENT TO MODULE CORES BY THE IMMERSION PROCESS COMP AC7118 PAR
80-T-31-2915 MANUFACTURE OF MONOLITHIC COMPONENTS BY IMPREGNATION OF DRY FIBERS ( RTM PROCESS ) COMP AC7118 LRP + CP
80-T-31-2916 REWORKING OF MONOLITHIC AND SANDWICHCOMPONENTS COMP AC7118
80-T-31-2918 MANUFACTURE OF MONOLITHIC FIBER-REINFORCED PLASTIC (FRP) COMPONENTS BY MEANS OF THE RESIN COMP AC7118 LRP + CP
80-T-31-2919 INFUSION (RI) PROCESS
MANUFACTURE OF MONOLITHIC COMPONENTS BYMEANS OF MODIFIED VACUUM INFUSION PROCESS (MVI COMP AC7118 LRP + CP
80-T-31-2920 PROCESS)
PRODUCTION OF GFPR PARTS IN WET LAMINATING PROCESS COMP AC7118 PAR + CP
80-T-31-2925 COMPOUNDING SEMI-FINISHED DRY FIBERS BY AUTOMATIC SEWING COMP AC7118 LRP
80-T-31-2950 FABRICATION DES COMPOSANTS MONOLITHIQUES À PARTIR DE PRÉIMPRÉGNÉS COMP AC7118 PAR
80-T-32-1000 FORMING OF ALUMINIUM SHEETS AND SECTIONS out out
80-T-32-1005 FORMING OF TI AND TI¿ALLOY SHEETS out out
80-T-32-1011 THERMOFORMING OF POLYCARBONATE PLATES out out
80-T-32-1012 THERMOFORMING OF HONEYCOMB CORES FROM PHENOL RESIN BONDED POLYAMIDE PAPER COMP AC7118 PAR + CP
80-T-32-1015 MANUFACTURE OF STRUCTURAL FRP COMPONENTS MADE OF FIBER REINFORCED THERMOPLASTICS out out
80-T-32-2210 MULTI-ROLL BENDING OF ALUMINUM ANDALUMINUM ALLOY STRINGER SECTIONS out out
80-T-32-2310 PRODUCTION OF JOGGLES AT AL-SECTIONS out out
80-T-32-2321 DIMPLING OF SHEETS FOR ATTACHING PARTS ASA AC7135
80-T-32-2610 COLD WORKING OF DRILLED HOLES WITH MANDREL ASA AC7135 & AC7135/1
80-T-32-2611 COLD WORKING OF HOLES ASA AC7135 & AC7135/1
80-T-32-2612 AUSHALSEN VON ROHRLEITUNGEN out out
80-T-32-2615 FLARING OF PIPE ENDS out out
80-T-32-2616 BEADING OF PIPE ENDS out out
80-T-32-3320 WERKZEUGE AUS KUNSTSTOFF ZUM FORMEN UND RICHTEN VON INTEGRALBAUTEILEN out out
80-T-32-5000 SUPERPLASTIC FORMING OF TI AND AL ALLOYS out out
80-T-33-3010 SCHERSCHNEIDEN VON BLECHEN UND PROFILEN out out
80-T-33-3020 TRENNEN VON KERNVERBUNDEN out out
80-T-33-3110 THERMAL CUTTING OF SEMI-FINISHED METALLIC MATERIALS out out
80-T-33-3111 LASER BEAM CUTTING OF METALLIC MATERIALS NM AC7116 & AC7116/4
80-T-33-3362 ABRASIVE CUTTING OF METALLIC AND NON-METALLIC MATERIALS WITH A HIGH-PRESSURE WATER TORCH NM - Not mandated AC7116 & AC7116/7
80-T-33-3500 CHEMICAL MILLING GENERAL CP AC7108 & AC7108/5
80-T-33-3510 CHEMICAL MILLING OF ALUMINUM AND ALUMINUM ALLOYS CP AC7108 & AC7108/5
80-T-33-3515 CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYS CP AC7108 & AC7108/5
80-T-34-0101 INSTALLATION OF ELECTRICAL CABLING out out
80-T-34-0107 INSTALLATION OF DUCTS FOR THE AIR CONDITIONING SYSTEM out out
80-T-34-0108 ROLLER SWAGING OF TITANIUM TUBES INTO TUBE FITTINGS ( 3-GROOVES ) out out
80-T-34-0109 MONTAGE DES TUYAUTERIES RIGIDES ET DES TUYAUTERIES SOUPLES out out
80-T-34-0114 INSTALLATION OF O-RINGS IN FUEL PIPES out out
80-T-34-0119 INSTALLATION OF PRESSURE GAS OXYGEN SYSTEM out out
80-T-34-0120 ABDICHTEN MIT KLEBBAND out out
80-T-34-0122 EINBAU VON LUFTVERTEILERSCHLAEUCHEN UND FALTBAELGEN out out
80-T-34-0155 HERSTELLEN VON GFK-BESCHICHTETEN KERNVERBUNDPLATTEN out out
80-T-34-0156 HERSTELLEN VON KERNVERBUNDPLATTEN MIT BLECHBESCHICHTUNG out out
80-T-34-0180 INSTALLATION OF CALFAX LIVE - LOCK FASTENERS ASA AC7135 & AC7135/1
80-T-34-0185 EINBAU VON ACRES - UEBERMASSHUELSEN ASA AC7135 & AC7135/1
80-T-34-3000 INSTALLATION OF ANCHOR NUTS ASA AC7135 & AC7135/1
80-T-34-3001 POSE DES VIS ET DES ÉCROUS ASA AC7135
80-T-34-3002 INSTALLATION OF ROSAN THREADED INSERTS ASA AC7135 & AC7135/1
80-T-34-3003 INSTALLATION OF HELICAL THREADED INSERTS ASA AC7135 & AC7135/1
80-T-34-3004 RING-LOCKED FITTINGS ABS0920 AND ABS0921 ASA AC7135 & AC7135/1
80-T-34-3006 IDENTIFICATION OF TORQUE-TIGHTENED SCREWED CONNECTIONS ASA AC7135 & AC7135/1
80-T-34-3010 SCREW LOCKING ASA AC7135 & AC7135/1
80-T-34-3011 WIRE LOCKING ASA AC7135 & AC7135/1
80-T-34-3012 SECURING SCREWED CONNECTIONS WITH ADHESIVE ASA AC7135 & AC7135/1
80-T-34-3013 SECURING WITH LOCKWASHERS ASA AC7135 & AC7135/1
80-T-34-3014 SAFETYING WITH SPLIT PINS ASA AC7135 & AC7135/1
80-T-34-3015 SECURING WITH WASHERS ASA AC7135 & AC7135/1
80-T-34-3016 ECROUS AUTOFREINÉS ASA AC7135 & AC7135/1
80-T-34-3017 PRODUCTION AND ASSEMBLY OF GROOVE NUT LOCKING SYSTEMS ASA AC7135 & AC7135/1
80-T-34-3019 INSTALLATION OF SELF-CUTTING SCREWS ASA AC7135 & AC7135/1
80-T-34-3020 INSTALLATION OF LOCKING SYSTEMS PER ABS0738 ASA AC7135 & AC7135/1
80-T-34-3030 INSTALLATION OF INSERT NUTS IN SANDWICH COMPONENTS ASA or COMP (AC7135 & AC7135/4) or AC7118 PAR
80-T-34-3032 NON-STRUCTURAL ADHESIVE BONDING. out out
80-T-34-3050 SERRAGE DES VIS ET DES ÉCROUS ASA AC7135 & AC7135/1
80-T-34-3200 PRESSING AND INSERTION OF BUSHES AND BEARINGS ASA AC7135 & AC7135/3
80-T-34-3202 INSTALLATION OF SPHERICAL PLAIN AND ROLLING BEARINGS WITH RETAINER BUSHES ASA AC7135 & AC7135/3
80-T-34-3205 INSTALLATION OF SELF - CLINCHING STUDS ASA AC7135 & AC7135/1
80-T-34-3215 INSTALLATION OF RIVETLESS NUT PLATES ASA AC7135 & AC7135/1
80-T-34-3314 PRODUCTION OF CABLE CONTROLS out out
80-T-34-3700 INSTALLATION OF BEARINGS AND BUSHES BY HEATING AND/OR COOLING ASA AC7135 & AC7135/3
80-T-34-5620 INSERTION OF INSERT NUTS ASA AC7135 & AC7135/1
80-T-34-5621 INSTALLATION OF MOVABLE INSERT NUTS ASA AC7135 & AC7135/1
80-T-34-5661 INSTALLATION OF SPHERICAL PLAIN BEARINGS ASA AC7135 & AC7135/3
80-T-34-5662 ROHRVERBINDUNG SYSTEM BAC out out
80-T-34-5663 PRODUCTION AND INSTALLATION OF GAMAH SYSTEM PIPE COUPLINGS out out
80-T-34-5664 AUFPRESSEN UND MONTAGE VON HTE - RAFLEX - KUPPLUNG out out
80-T-34-5665 PRODUCTION OF HOSES ( AEROQUIP ) out out
80-T-34-5666 ROHRVERBINDUNGEN MIT SCHNEIDRING EO ( ERMETO-ORIGINAL) out out
80-T-34-5667 ROHRVERBINDUNGEN MS MIT SCHNEIDRING out out
80-T-34-5668 PIPE CONNECTIONS FLARED COUPLINGS out out
80-T-34-5669 PIPE CONNECTIONS HARRISON SYSTEM out out
80-T-34-5670 PIPING DEUTSCH SYSTEM out out
80-T-34-5671 ROHRVERBINDUNGEN SYSTEM ARSAERO out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 1
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
80-T-34-5672 ROHRVERBINDUNGEN SYSTEM WIGOFLEX out out
80-T-34-5673 ROHRVERBINDUNGEN SYSTEM INTERFLEX out out
80-T-34-5674 PRODUCTION AND INSTALLATION OF GAMAH - JUNKERS PIPE COUPLINGS out out
80-T-34-5675 PRODUCTION OF FLEXIBLE HOSES ( TITEFLEX ) out out
80-T-34-5678 INSTALLATION OF PIPE COUPLINGS WITH V-CLAMPS out out
80-T-34-5679 PRODUCTION AND INSTALLATION OF FLEXIBLE COUPLING SYSTEMS FOR PIPES ACCORDING TO ABS0395 out out
80-T-34-5680 MONTAGE VON RYNGLOK-ROHRVERBINDERN AUF TITANROHRE out out
80-T-34-5801 CLOSE RIVETING ( EDGE SEALING ) ASA AC7135 & AC7135/4
80-T-34-5802 CLOSE RIVETING ( AREA SEALING ) ASA AC7135 & AC7135/4
80-T-34-5803 WET INSTALLATION OF FASTENERS ASA AC7135 & AC7135/4
80-T-34-5804 TREATMENT OF SOLID ALUMINUM RIVETS PRIOR TO INSTALLATION HT AC7102 & AC7102/2
80-T-34-5805 INSTALLATION OF RIVETS WITH AN AUTOMATIC RIVETER ASA AC7135 & AC7135/1
80-T-34-5807 INSTALLATION OF TITANIUM - NIOBIUM SOLID RIVETS ASA AC7135 & AC7135/1
80-T-34-5809 INSTALLATION OF SOLID RIVETS OF TITANIUM ASA AC7135 & AC7135/1
80-T-34-5810 INSTALLATION OF SOLID MONEL RIVETS ASA AC7135 & AC7135/1
80-T-34-5811 INSTALLATION OF BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5812 INSTALLATION OF LOCKBOLTS ASA AC7135 & AC7135/1
80-T-34-5814 POSE DES RIVETS PLEINS EN ALUMINIUM ASA AC7135 & AC7135/1
80-T-34-5815 INSTALLATION OF HI-LOKS ASA AC7135 & AC7135/1
80-T-34-5816 INSTALLATION OF BIMETALLIC ( CHERRY BUCK ) RIVETS ASA AC7135 & AC7135/1
80-T-34-5817 INSTALLATION OF CLOSE-TOLERANCE BOLTS (HI-LITE, VERI-LITE) ASA AC7135 & AC7135/1
80-T-34-5818 INSTALLATION OF AVDEL MBC BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5819 INSTALLATION OF COMPOSI - LOK BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5820 INSTALLATION OF AVDEL BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5821 INSTALLATION OF CHERRYLOCK BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5822 INSTALLATION OF NAS BLIND RIVETS ANDMS-/NASM- AND EN BLIND BOLTS ASA AC7135 & AC7135/1
80-T-34-5824 INSTALLATION OF BLIND NUTS ( DAVIS NUT ) ASA AC7135 & AC7135/1
80-T-34-5825 INSTALLATION OF BLIND RIVET NUTS ASA AC7135 & AC7135/1
80-T-34-5827 INSTALLATION OF CHERRYMAX BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5829 INSTALLATION OF TAPER-LOKS ASA AC7135 & AC7135/1
80-T-34-5831 INSTALLATION OF POP BLIND RIVETS ASA AC7135 & AC7135/1
80-T-34-5840 INSTALLATION OF CAMLOC QUICK - RELEASE FASTENERS ASA AC7135 & AC7135/1
80-T-34-5850 AUTOMATED INSTALLATION OF STUMP-TYPE LOCK BOLTS ASA AC7135 & AC7135/1
80-T-34-6100 RESISTANCE WELDING ( SPOT AND SEAM WELD ) WELD AC7110 & AC7110/4
80-T-34-6601 REPAIR WELDING INSTRUCTION out out
80-T-34-6620 INERT GAS FUSION WELDING (TIG) WELD AC7110 & AC7110/5
80-T-34-6830 DIFFUSION BONDING (DB) WELD AC7110 & AC7110/8
80-T-34-6900 ELECTRON - BEAM WELDING WELD AC7110 & AC7110/3
80-T-34-6910 LASER - BEAM WELDING WELD AC7110 & AC7110/6
80-T-34-8000 BRAZING WELD AC7110 & AC7110/1
80-T-34-8010 OPEN FLAME BRAZING WELD AC7110 & AC7110/1
80-T-34-8030 FURNACE BRAZING WELD AC7110 & AC7110/1
80-T-34-8200 HIGH - TEMPERATURE BRAZING WELD AC7110 & AC7110/1
80-T-34-8800 INDUCTION BRAZING WELD AC7110 & AC7110/1
80-T-34-9000 BONDING OF STRUCTURES COMP AC7118
80-T-34-9001 STRUCTURAL BONDING OF FIBER METAL LAMINATES - GLARE - out out
80-T-34-9006 BONDING RESTRICTION AT INTERFACES COMP AC7118 PAR
80-T-34-9008 STRUCTURAL BONDING UNDER REDUCED PRESSURE COMP AC7118
80-T-34-9013 RIVETED PANEL JOINTS BONDED WITH COLD - SETTING ADHESIVE out out
80-T-34-9014 COLLAGE DES SUPPORTS out out
80-T-34-9018 JOINING OF TEXTILE FLOOR COVERINGS out out
80-T-34-9020 INSTALLATION OF BEARINGS & BUSHES BY BONDING ASA AC7135 & AC7135/3
80-T-34-9032 KLEBEN NICHTSTRUKTURELLER VERBINDUNGEN COMP AC7118 PAR
80-T-34-9033 BONDING WITH ADHESIVES ON SILICONE BASIS COMP AC7118 PAR
80-T-34-9034 MASKING OF BONDED JOINTS WITH ADHESIVE TAPE out out
80-T-34-9036 STRUCTURAL BONDING WITH PASTE ADHESIVES COMP AC7118 PAR
80-T-34-9600 APPLICATION OF SEALING COMPOUNDS ASA AC7135 & AC7135/4
80-T-34-9601 SEALING WITH TWO - COMPONENT SEALANT ON POLYSULPHIDE BASIS ASA AC7135 & AC7135/4
80-T-34-9602 SEALING OF COMPOSITE COMPONENTS ASA AC7135 & AC7135/4
80-T-34-9603 SEALING OF INTEGRAL TANKS ASA AC7135 & AC7135/4
80-T-34-9604 APPLICATION OF SILICONE - BASED SEALANTS ASA AC7135 & AC7135/4
80-T-35-0001 VAPOR DEGREASING out out
80-T-35-0002 REINIGEN VON ROHREN out out
80-T-35-0003 FINAL CLEANING OF TUBES OF THE OXYGEN SYSTEM out out
80-T-35-0014 NETTOYAGE À L AIDE DE SOLVANTS ORGANIQUES (NETTOYANTS À FROID) ASA or CP AC7135 or AC7108
80-T-35-0015 CLEANING WITH COLD CLEANING AGENTS ASA or CP AC7135 or AC7108
80-T-35-0019 CLEANING WITH EMULSION CLEANING AGENTS CP AC7108
80-T-35-0020 ALKALINE CLEANING CP AC7108
80-T-35-0021 ALKALINE CLEANING OF STEEL STAINLESS STEEL MG AND NICKEL ALLOYS CP AC7108
80-T-35-0023 ULTRASONIC CLEANING CP AC7108
80-T-35-0024 SPRAY CLEANING CP AC7108
80-T-35-0030 ELECTROLYTIC DEGREASING CP AC7108
80-T-35-0031 ELECTROLYTIC DEGREASING AND CLEANING ( ANODIC ) CP AC7108
80-T-35-0033 ELECTROLYTIC DEGREASING AND CLEANING ( WITH REVERSAL ) CP AC7108
80-T-35-0040 DISINFECTION OF POTABLE WATER SYSTEM out out
80-T-35-0050 VAPOUR JET CLEANING ( HIGH PRESSURE ) CP AC7108
80-T-35-0060 FINAL CLEANING OF TUBES AND COMPONENTS OF THE OXYGEN SYSTEM WITH SOLVENTS out out
80-T-35-0061 FINAL CLEANING OF COMPONENTS OF THE OXYGEN SYSTEM WITH AQUEOUS CLEANING AGENTS out out
80-T-35-0090 RINSING CP AC7108
80-T-35-0095 WATER QUALITY CP AC7108
80-T-35-0100 ACIDIC PICKLING OF ALUMINUM AND ALUMINUM ALLOYS CP AC7108 & AC7108/12
80-T-35-0103 PICKLING OF CRABON AND LOW - ALLOY STEELS CP AC7108 & AC7108/12
80-T-35-0104 PICKLING OF STAINLESS, AUSTENITIC STEEL CP AC7108 & AC7108/12
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
80-T-35-0106 PICKLING OF TITANIUM AND TITANIUM ALLOYS - ACID - CP If performed prior NDT: AC7108 & AC7108/2
80-T-35-0108 PICKLING OF AL FOR BONDING CP AC7108 & AC7108/12
80-T-35-0109 PREVENTION OF SCALING DURING HEAT TREATMENT ( CHEMICAL COATINGS ) HT AC7102
80-T-35-0110 ALKALINE PICKLING OF ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108
80-T-35-0113 DESCALING OF TITANIUM AND TITANIUM ALLOYS IN SALT BATHS out out
80-T-35-0114 PICKLING ( BRIGHTENING ) OF ALUMINIUM AND ALUMINIUM ALLOYS IN NITRIC ACID CP AC7108 & AC7108/12
80-T-35-0116 PICKLING OF MAGNESIUM CASTING ALLOYS IN CHROMIC ACID CP AC7108 & AC7108/12
80-T-35-0118 PICKLING OF STAINLESS STEEL PRIOR TO BONDING CP AC7108 & AC7108/12
80-T-35-0125 ACTIVATING OF FRP SURFACES BY MEANS OF A PULSED TEA-CO2 LASER out out
80-T-35-0130 PRETREATMENT OF NON-STRUCTURAL JOINTS FOR BONDING CP AC7108 & AC7108/3
80-T-35-0131 PRETREATMENT OF POLYAMIDE FOR BONDING CP AC7108 & AC7108/12
80-T-35-0132 PRETREATMENT OF FLUOROPLASTICS FOR BONDING out out
80-T-35-0134 VORBEHANDLUNG VON KUNSTSTOFFTEILEN ( PEEK ) FUER DAS KLEBEN CP AC7108 & AC7108/12
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
80-T-35-0140 PICKLING OF ALUMINIUM ALLOYS WITH HIGH SILICON CONTENT CP If performed prior NDT: AC7108 & AC7108/2
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
80-T-35-0194 PICKLING OF MARTENSITIC STEELS CP If performed prior NDT: AC7108 & AC7108/2
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
80-T-35-0196 ALKALINE PICKLING OF TITANIUM AND TITANIUM ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
80-T-35-0200 ABRASIVE BLASTING - CLEANING - CP or SE AC7108 or AC7117
80-T-35-0204 ABRASIVE BLASTING - VAPOUR LAPPING - CP or SE AC7108 or AC7117
80-T-35-0205 SHOT PEENING SE AC7117 & AC7117/3 & AC7117/5
80-T-35-0206 FLAP PEENING SE AC7117 & AC7117/4
80-T-35-0320 DECORATIVE BRUSHING out out
80-T-35-0507 PICKLING OF MAGNESIUM CASTING ALLOYS IN PHOSPHORIC ACID CP AC7108 & AC7108/12
80-T-35-1000 PHOSPHATING CP AC7108 & AC7108/11
80-T-35-1101 CHROMATING OF ALUMINUM AND ALUMINUM ALLOY CP AC7108 & AC7108/11
80-T-35-1103 CHROMATING OF MG CASTING ALLOYS CP AC7108 & AC7108/11
80-T-35-1107 CHROMIUM PASSIVATION OF CADMIUM - PLATED SURFACES CP AC7108 & AC7108/9
80-T-35-1200 PASSIVATION OF CORROSION - RESISTANT AUSTENITIC STEEL CP AC7108 & AC7108/12
80-T-35-1201 PASSIVATION OF MARTENSITIC FERRITIC CORROSION - RESISTANT STEEL CP AC7108 & AC7108/12
80-T-35-2000 DC SULPHURIC ACID ANODIZING WITHOUT SEALING CP AC7108 & AC7108/8
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 2
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
80-T-35-2001 SEALING OF ANODIZED LAYERS CP AC7108 & AC7108/8
80-T-35-2002 DC SULPHURIC ACID COLOR ANODIZING WITH SEALING CP AC7108 & AC7108/8
80-T-35-2003 DICHROMAT - NACHVERDICHTUNG VON (GS) - ANODISIERSCHICHTEN CP AC7108 & AC7108/8
80-T-35-2010 TARTARIC/SULFURIC ACID ANODIZING OF ALUMINUM ALLOYS CP AC7108 & AC7108/8
80-T-35-2100 CHROMIC ACID ANODIZING CP AC7108 & AC7108/8
80-T-35-2101 HOT WATER SEALING OF CHROMIC - ACID ANODIC COATINGS CP AC7108 & AC7108/8
80-T-35-2102 DIRECT - CURRENT CHROMIC ACID PROCESS AS PRETREATMENT FOR BONDED JOINTS out out
80-T-35-2103 DICHROMATE SEALING OF CHROMIC ACID ANODIZED LAYERS CP AC7108 & AC7108/8
80-T-35-2200 HARTANODISIEREN CP AC7108 & AC7108/8
80-T-35-2500 ANODIZING OF TITANIUM AND TITANIUM ALLOYS CP AC7108 & AC7108/8
80-T-35-2501 ANODIZING OF TI AND TI ALLOYS AS PRETREATMENT FOR STRUCTURAL PARTS TO BE BONDED CP AC7108 & AC7108/3
80-T-35-2600 ELECTROLYTIC POLISHING OF MARTENSITIC STEEL CP AC7108 & AC7108/12
80-T-35-3000 CADMIUM¿PLATING OF STEEL CP AC7108 & AC7108/9
80-T-35-3003 CADMIUM - PLATING OF COPPER ALLOYS CP AC7108 & AC7108/9
80-T-35-3200 HARD CHROMIUM PLATING CP AC7108 & AC7108/9
80-T-35-3301 ELECTROLYTIC COPPER - PLATING OF STEELS AND NON - FERROUS HEAVY METALS CP AC7108 & AC7108/9
80-T-35-3302 ELECTROLYTIC NICKEL - PLATING CP AC7108 & AC7108/9
80-T-35-3303 VERNICKELN VON HOCHLEGIERTEN STAEHLEN CP AC7108
80-T-35-3304 SILVER - PLATING OF CU AND CU - ALLOYS - ELECTROPLATING - CP AC7108 & AC7108/9
80-T-35-3306 VERZINNEN SAUER CP AC7108
80-T-35-3320 GALVANISCHES AUFTRAGEN VON METALLSCHICHTEN IM DALIC - VERFAHREN CP AC7108 & AC7108/13
80-T-35-4100 FLAME SPRAYING out out
80-T-35-4200 VACUUM DEPOSITION OF CADMIUM CP AC7108 & AC7108/7
80-T-35-4300 CHEMICAL NICKEL - PLATING OF STEEL CP AC7108 & AC7108/10
80-T-35-4302 CHEMICAL NICKEL - PLATING OF TITANIUM ALLOY CP AC7108 & AC7108/10
80-T-35-5000 COATING WITH WASH PRIMER CP AC7108 & AC7108/1
80-T-35-5001 COATING WITH SYNTHETIC RESIN PRIMER CONTAINING ZINC CHROMATE CP AC7108 & AC7108/1
80-T-35-5002 APPLICATION DES PEINTURES PRIMAIRES À DEUX COMPOSANTS (À BASE D'ÉPOXY) CP AC7108 & AC7108/1
80-T-35-5008 COATING WITH TWO - COMPONENT POLYURETHANE PRIMER CP AC7108 & AC7108/1
80-T-35-5010 SURFACE SEALING OF MG CASTING ALLOYS CP AC7108
80-T-35-5012 PROTECTIONS OF PARTS IN STORAGE AND INTERMEDIATE STORAGE DURING PRODUCTION out out
80-T-35-5020 TWO - COMPONENT ZINC - CHROMATE PRIMER CP AC7108 & AC7108/1
80-T-35-5021 TWO - COMPONENT ZINC - CHROMATE PRIMER ( EP - BASED ) CP AC7108 & AC7108/1
80-T-35-5022 APPLICATION DES PEINTURES PRIMAIRES À DEUX COMPOSANTS (À BASE D'ÉPOXY) out out
80-T-35-5023 COATING WITH TWO¿COMPONENT EP¿BASED PRIMER,CHROMATE¿FREE CP AC7108 & AC7108/1
80-T-35-5024 COATING WITH TWO - COMPONENT POLYURETHANE PRIMER CHROMATE - FREE CP AC7108 & AC7108/1
80-T-35-5025 COATING WITH TWO - COMPONENT PRIMER CHROMATE - FREE CP AC7108 & AC7108/1
80-T-35-5030 COATING WITH TWO/THREE-COMPONENT WATER-BASED PRIMER CP AC7108 & AC7108/1
80-T-35-5035 BESCHICHTEN MIT ZWEIKOMPONENTEN WASSER- BASIERENDEM GRUNDANSTRICH FÜR FASERVERBUND- CP AC7108 & AC7108/1
80-T-35-5100 WERKSTOFFE, MIT
BESCHICHTEN CHROMATFREI
EINSCHICHTLACK CP AC7108
80-T-35-5101 COATING WITH TWO-COMPONENT EP-BASED TOP VARNISH CP AC7108 & AC7108/1
80-T-35-5103 BESCHICHTEN MIT NITRO - KOMBINATIONSLACK out out
80-T-35-5106 APPLICATION DE PEINTURE DE FINITION À BASE DE POLYURÉTHANE CP AC7108 & AC7108/1
80-T-35-5107 COATING OF TANK COMPARTMENTS FUNGICIDE out out
80-T-35-5130 COATING WITH TWO/THREE-COMPONENT WATER-BASED TOP COAT CP AC7108 & AC7108/1
80-T-35-5190 COATING WITH COPOLYMERIZED SILICON ALKYD TOP COAT out out
80-T-35-5202 COATING WITH HIGHLY ELASTIC PAINTS CP AC7108 & AC7108/1
80-T-35-5203 COATING WITH ANTISTATIC VARNISH CP AC7108 & AC7108/1
80-T-35-5212 COATING WITH ANTI - SLIP PAINT CP AC7108 & AC7108/1
80-T-35-5218 APPLICATION OF ELASTIC PROTECTIVE COATINGS CP AC7108 & AC7108/1
80-T-35-5250 APPLICATION OF PEELABLE PROTECTIVE COATINGS CP AC7108 & AC7108/1
80-T-35-5254 COATING WITH PUR-BASED VARNISH ABRASION-RESISTANT CP AC7108 & AC7108/1
80-T-35-5256 COATING WITH CONDUCTIVE PAINT CP AC7108 & AC7108/1
80-T-35-5260 TWO - COMPONENT PUR CONDUCTIVE VARNISH MEAN RESISTIVITY CP AC7108 & AC7108/1
80-T-35-5269 BESCHICHTEN MIT BRANDSCHUTZFARBE ( BSF ) out out
80-T-35-5279 BESCHICHTEN MIT DECKLACK FUER BRANDSCHUTZFARBE ( BSF ) out out
80-T-35-5400 APPLICATION OF FINE POWDER LAYERS CP AC7108 & AC7108/1
80-T-35-5401 ELECTROSTATIC POWDER COATING OF AL-COMPONENTS CP AC7108 & AC7108/1
80-T-35-5402 APPLICATION OF FINE LAYERS ( GELCOAT ADHESIVE FILM ) out out
80-T-35-5403 APPLICATION OF PVF FOIL out out
80-T-35-5404 APPLICATION OF FILLER ASA AC7135 & AC7135/1
80-T-35-5601 WHIRL SINTERING out out
80-T-35-5701 KORROSIONSSCHUTZ DER STEUERSEILE out out
80-T-35-5702 PRESERVATION FOR INTERMEDIATE STORAGE out out
80-T-35-5704 BEHANDELN MIT KORROSIONSSCHUTZMITTEL out out
80-T-35-5706 BEHANDELN MIT LEINOEL out out
80-T-35-5720 POST - PRESERVATION OF ANODIZED AND SEALED COMPONENTS CP AC7108
80-T-35-5801 TREATMENT WITH SYNTHETIC LUBRICANTS out out
80-T-35-5900 TREATMENT WITH OVEN - DRYING MOLYBDENUM DISULPHIDE ( MOS2 ) LUBRICANT out out
80-T-35-5901 TREATMENT WITH AIR-DRYING MOLYBDENUM DISULPHIDE ( MOS2 ) LUBRICANTS CP AC7108 & AC7108/1
80-T-35-5902 BEHANDELN MIT MOLYBDAENDISULFID - SCHMIERMITTELN UND -PASTEN ASA AC7135 & AC7135/4
80-T-35-5903 ASSEMBLY WITH DUROPLASTIC ANTI-CORROSIVE COMPOUND, ZINK CHROMATE BASED ASA AC7135 & AC7135/4
80-T-35-5904 ASSEMBLY WITH DUROPLASTIC ANTI-CORROSION COMPOUND, CHROMATE-FREE out out
80-T-35-5905 WET ASSEMBLY OF COMPONENTS WITH CORROSION PREVENTIVES ON A CHROMATE BASIS ASA AC7135 & AC7135/4
80-T-35-9021 PRESERVATION OF CUT EDGES ASA AC7135
80-T-35-9022 REMOVAL OF HARDENED ADHESIVE FROM BONDED JOINTS out out
80-T-35-9023 PRESERVATION OF RIVET ROWS ASA AC7135 & AC7135/4
80-T-35-9030 APPLICATION OF FILLERS ASA AC7135 & AC7135/4
80-T-35-9040 COATING WITH EROSION-RESISTANT AND ANTI-STATICVARNISH CP AC7108 & AC7108/1
80-T-35-9050 SMOOTHING OF FRP COMPONENTS out out
80-T-35-9110 SPRAYING CUP GUN out out
80-T-35-9115 AIRLESS SPRAYING out out
80-T-35-9120 COATING WITH PAINTS AND VARNISHES, GENERAL ASA or CP (AC7135 & AC7135/4) or (AC7108 & AC7108/1)
80-T-35-9121 PROCESSING OF WASH PRIMER, PRIMER AND TOP COAT CP AC7108 & AC7108/1
80-T-35-9122 VERARBEITEN VON ANSTRICHSTOFFEN FUER BESONDERE ZWECKE out out
80-T-35-9123 PAINT COATING IN INTERIOR FURNISHING CP AC7108 & AC7108/1
80-T-35-9124 REPAIR OF PAINT COATINGS ON METALLIC AND NON-METALLIC SURFACES CP AC7108
80-T-35-9125 REMOVAL OF ORGANIC COATINGS CP AC7108 & AC7108/14
80-T-35-9126 MECHANISCHES ENTSCHICHTEN out out
80-T-35-9127 FLUGZEUGAUSSENANSTRICH CP AC7108 & AC7108/1
80-T-35-9135 IN-FORM-BESCHICHTUNG FÜR INNENAUSSTATTUNGS-BAUTEILE out out
80-T-35-9136 DECORATIVE WATER TRANSFER PRINTING IN INTERIOR FURNISHING out out
80-T-35-9799 APPLICATION DES PRODUITS DE PROTECTION HYDROFUGES, DÉPLAÇANT L'EAU, INHIBITEURS DE CORROSION CP AC7108
80-T-36-1010 WAERMEBEHANDLUNG VON ALUMINIUM HT AC7102 & AC7102/2
80-T-36-1015 HEAT TREATMENT OF TITANIUM HT AC7102
80-T-36-1020 HEAT TREATMENT OF STEEL HT AC7102
80-T-36-3001 CASE HARDENING ( CARBURIZATION ) HT AC7102 & AC7102/3
80-T-36-3050 GASNITRIEREN HT AC7102 & AC7102/4
80-T-36-3201 BATH NITRIDING ( TENIFER TREATMENT ) HT AC7102 & AC710/4
80-T-36-3300 DEHYDROGENATION OF STEELS HT or CP AC7102 or [AC7108 & (AC7108/9 or AC7108/10 or AC7108/12 or AC7108/14)]
80-T-36-3400 DEHYDROGENATION OF TITANIUM AND TITANIUM ALLOYS HT AC7102
80-T-39-0109 ISOLATION ET CHAUFFAGE DES CONDUITES D'EAU out out
80-T-39-0110 PRODUCTION OF PIPING out out
80-T-39-0116 INSTALLATION OF SHIMS IN METALLIC STRUCTURES ASA AC7135
80-T-39-0117 OBTURATEURS POUR TUYAUX RIGIDES, TUYAUX SOUPLES ET ÉQUIPEMENTS out out
80-T-39-0118 APPLICATION OF GAP FILLERS ASA AC7135 & AC7135/4
80-T-39-0121 INTRODUCTION OF CORE AND EDGE FILLER COMPOUNDS INTO SANDWICH COMPONENTS COMP AC7118 CP
80-T-39-0125 SURFACE PROTECTION AND INSTALLATION OF SCUFF PLATES/ANTI-CHAFING PLATES out out
80-T-39-0131 HERSTELLEN UND BESCHRIFTEN VON KENNZEICHNUNGSSCHILDERN out out
80-T-39-0132 MARKING WITH INDELIBLE INK out out
80-T-39-0133 IDENTIFICATION BY EMBOSSING out out
80-T-39-0134 MAKING BY VIBRO - ENGRAVING out out
80-T-39-0136 IDENTIFICATION BY ELECTROCHEMICAL ETCHING out out
80-T-39-0138 IDENTIFICATION WITH FELT-TIP PEN out out
80-T-39-0140 IDENTIFICATION BY DEFINED EMBOSSING ( BORRIES EMBOSSING ) out out
80-T-39-0141 MISE EN PLACE ET PROTECTION DES ÉTIQUETTES D'IDENTIFICATION ET DES PLAQUETTES INDICATRICES ASA AC7135
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 3
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
80-T-39-0221 MANUFACTURE OF FLOOR PANELS FROM PREPREG COMP AC7118 PAR + CP
80-T-39-0230 TREATMENT OF DAMAGE ON SHEET-METAL PARTS MADE OF ALUMINIUM-ALLOY ASA AC7135
80-T-39-0231 REMOVAL OF SURFACE DAMAGE ON ACRYLIC GLASS ( STRETCHED ) out out
80-T-39-0235 CLEANING AND PROTECTION OF CABIN WINDOW PANES out out
80-T-39-0331 FABRICATION, POSE ET RÉPARATION DES MATELAS D'ISOLATION out out
80-T-39-0401 ANWENDUNG VON TROCKENMITTELN out out
80-T-39-0501 PREVENTION OF CORROSION DURING PRODUCTION out out
80-T-39-0600 APPLICATION DES MATÉRIAUX D'ÉTANCHÉITÉ FUSIBLES out out
80-T-39-0950 APPLICATION OF ADHESIVE FILMS TO THE OUTER SKIN (DECORATION SHEETS) out out
80-T-39-1020 ANBRINGEN VON KENNZEICHNUNGEN AN ROHRLEITUNGEN out out
80-T-39-1021 APPLICATION OF DRY TRANSFER DECALS out out
80-T-39-1022 SOUDAGE DE REVÊTEMENTS DE SOL NON TEXTILES EN POLYCHLORURE DE VINYLE (PVC) out out
80-T-39-1023 APPLICATION OF TEXTILE FLOOR COVERINGS out out
80-T-39-1024 APPLICATION DE REVÊTEMENTS DE SOL NON TEXTILES out out
80-T-39-1025 APPLICATION OF ACTIVATED DECALS out out
80-T-39-1027 APPLICATION OF DECORATION SHEETS out out
80-T-39-1028 SILK SCREEN PRINTING OF TEXTS AND PICTURES out out
80-T-39-1035 INSTALLATION AND REMOVAL OF CEILING PANELS out out
80-T-39-1038 EVENING UP OF HEIGHT DISPLACEMENT OF FLOOR PANELS out out
80-T-39-4030 APPLICATION OF CHAFING STRIPS out out
80-T-40-0101 INSTALLATION OF CABLE HARNESSES IN AIRCRAFT out out
80-T-40-0102 INSTALLATION OF FIBER-OPTICAL CABLES IN AIRCRAFT out out
80-T-40-0103 ASSEMBLY OF OPTICAL CONNECTORS ABS0929-003 AND ABS0929-004 out out
80-T-40-0105 MONTAGE VON LWL-KONTAKTEN ABS1379-003 out out
80-T-40-0107 INSTALLATION OF QUADRAX COMPONENTS out out
80-T-40-0108 MONTAGE VON TWINAX-KOMPONENTEN out out
80-T-40-3050 COUPLES DE SERRAGE POUR LE MONTAGE DES COMPOSANTS ÉLECTRIQUES (MONTAGE FINAL) out out
80-T-40-3100 ASSEMBLY OF ABS1069 BACKSHELLS out out
80-T-40-3200 CONNECTEURS ÉLECTRIQUES out out
80-T-40-3201 LOCKING OF CONNECTORS WITH ADHESIVE out out
80-T-40-3202 FREINAGE DES PRISES ET DES INTERRUPTEURS ÉLECTRIQUES AU FIL À FREINER out out
80-T-40-3203 PRODUCTION OF COAXIAL CONNECTORS out out
80-T-40-3204 SPECIAL CONTACTS (COAXIAL) out out
80-T-40-3209 BACKSHELLS FOR CONNECTORS out out
80-T-40-3210 INSTALLATION OF PRESSURE-TIGHT GROMMETS out out
80-T-40-3213 MONTAGE DES BARRETTES out out
80-T-40-3214 TORSADAGE DES CÂBLES ÉLECTRIQUES out out
80-T-40-3215 PROTECTION OF ELECTRICAL CONNECTORS out out
80-T-40-3217 CRIMPEN VON KABELSCHUHEN out out
80-T-40-3218 STRIPPING OF ELECTRICAL CABLES out out
80-T-40-3219 SERTISSAGE DES CONTACTS SPÉCIAUX out out
80-T-40-3220 INSTALLATION OF CRIMPED CONNECTORS FOR SCREENED CABLES out out
80-T-40-3310 SPLICES AND END CAPS out out
80-T-40-3312 ELECTRICAL BONDING ASA AC7135 & AC7135/2
80-T-40-3500 CLEANING AND PREVERSATION OF ELECTRONIC ASSEMBLIES ETG AC7120 & AC7120/7
80-T-40-3701 FRETTAGE DES FAISCEAUX ÉLECTRIQUES out out
80-T-40-3702 INSTALLATION OF CABLE GUIDES AND SUPPORTS out out
80-T-40-3703 ELEKTRISCHE INSTALLATION IN STARREN LEITUNGEN out out
80-T-40-3710 HEAT SHRINKABLE HOSES AND MOULDINGS out out
80-T-40-3711 MARKING OF ELECTRICAL EQUIPMENT COMPONENTS out out
80-T-40-3712 GAINES DE PROTECTION POUR CÂBLES ÉLECTRIQUES out out
80-T-40-3713 LIGHTNING PROTECTION FOR CABLES out out
80-T-40-3714 MARKING OF ELECTRICAL CABLES WITH UV LASER out out
80-T-40-3735 HANDLING OF ELECTROSTATICALLY SENSITIVE ELECTRONIC COMPONENTS ETG AC7120
80-T-40-3736 PROVISION OF ELECTRONIC COMPONENTS out out
80-T-40-3737 CLEANING OF COMPONENTS OF THE ELECTRICAL SYSTEM AFTER INSTALLATION out out
80-T-40-4001 SERTISSAGE DES CONTACTS RONDS SUR LES CÂBLES ÉLECTRIQUES EN CUIVRE out out
80-T-40-5001 CRIMPING OF CIRCULAR CONTACTS TO ALUMINUM CABLES out out
80-T-40-8100 SOLDERING OF ELECTRICAL CONNECTIONS BY HAND ETG AC7120 & AC7120/2 - AC7121
80-T-40-8103 SHRINKING-ON OF SOLDERING SLEEVES out out
80-T-40-8105 SOLDERING WITH SOLDERING MACHINES ETG AC7120 & AC7120/2 & AC7120/3
80-T-40-8110 SOLDERING OF ELECTRICAL CONNECTIONS BY SOLDERING SYSTEMS, - CONVECTION SOLDERING - ETG AC7120 & AC7120/1 & AC7120/2 & AC7120/4 & AC7120/6
80-T-50-0005 KONSTRUKTIONS-, FERTIGUNGS- UND ABNAHMEANWEISUNG FUER HARTCHROMTEILE out out
80-T-50-1010 FERTIGUNG VON PASSAGIERRAUM- UND FRACHTRAUM - FUßBODENPLATTEN COMP AC7118 PAR + CP
80-T-50-3005 SCHERSCHNEIDEN DER TITAN-RIßSTOPPER out out
80-T-50-3100 INSTALLATION OF FLOOR STRUCTURE, SECT. 17 ¿ 18, PROGRAM: A320 ASA AC7135
80-T-50-4005 OBERFLAECHENSCHUTZ UND MONTAGE DER SCUFF-PLATES ASA AC7135
80-T-50-4011 AUFTRAGEN VON DICHTMASSE AN DER LANDEKLAPPE ASA AC7135 & AC7135/4
80-T-50-4015 EINBRINGEN VON PR 2752 ZUR RANDWINKELVERSTAERKUNG AN DER DRUCKKALOTTE ASA AC7135
80-T-50-4020 OBERFLAECHENSCHUTZ DES INNENSTRUKTUR VON CARGO-DOORS BIS ZUR EINFUEHRUNG DER MOD.5568 D 4613 out out
80-T-50-4030 KLEBEN DES SCHEUERSCHUTZES AN DEN LANDEKLAPPEN DES A310 UND A320 ASA AC7135
80-T-50-4050 PERFORIEREN VON KLEBFOLIE UND AUFSCHRUMPFEN AUF DIE WABENSTEGE COMP AC7118 MB
80-T-50-4060 AUFTRAGEN VON SPALTFUELLER ZWISCHEN HLW UND HLW-SCHILD ASA AC7135
80-T-50-5010 AUFTRAGEN VON TRENNMITTEL AUF MODULKERNE IM TAUCHVERFAHREN COMP AC7118 MB
80-T-50-6001 LEICHTSTOFF-FUELLMASSE ( MIKRO-HOHLKUGELN ) out out
80-T-50-6002 AUFTRAGEN DES PROVISORISCHES TRENNMITTELS NATRIUMALGINAT out out
80-T-50-6003 WASSERLOESLICHES BOLZENSCHMIERMITTEL ASA AC7135 & AC7135/1
80-T-50-6004 NACHARBEITEN VON KORROSIONSSCHUTZBEHANDLUNG FLUGZEUGZELLE INNEN ASA AC7135
80-T-D533-76660 LIQUID SHIM APPLICATION ON OVER WING DOOR METALLIC MATERIALS out out
ABP0-0001 INTRODUCTION TO AND CONTROL OF ABPSPECIFICATIONS out out
ABP0-0003 INDEX OF GENERAL MANUFACTURING SPECIFICATION out out
ABP0-1004 CONTROL AND APPROVAL OF DEVIATIONS FROM ABPSPECIFICATION BY PSD out out
ABP0-1005 CONTROL OF APPROVED ALTERNATIVE ABPSPECIFICATIONS out out
ABP0-1006 CONTROL FOR THE CONVERSION OF MATERIALS TO OTHER SPECIFICATIONS out out
ABP0-1007 CONTROL OF THE EFFECT OF METRIFICATION ON NON-METALLIC MATERIALS out out
ABP0-1008 CONTROL OF THE EFFECT OF METRIFICATION ON METALLIC MATERIALS out out
ABP0-1009 CONTROL OF CORROSION BY FIRE EXTINGUISHANTS out out
ABP0-1010 CONTROL OF DESIGN AUTHORITY APPROVED TECHNIQUE SHEETS out out
ABP0-1012 CONTROL OF APPROVAL AND ACCEPTANCE OF NON-BAEMETALLIC SPECIFICATIONS out out
ABP0-1013 CONTROL OF PROTECTIVE TREATMENT AND FINISHING FOR AIRBUS WING out out
ABP0-1014 CONTROL AND DEFINITION OF PROTECTIVE TREATMENT CODES out out
ABP0-1015 CONTROL OF STORAGE AND SHELF-LIFEFOR PREPREG AND ADHESIVE MATERIALS COMP AC7118 PAR + CP + LRP
ABP0-1016 CONTROL OF MASTER PYROMETER CALIBRATION HT AC7102 & AC7102/8
ABP0-1341 CONTROL OF APPROVED ALTERNATIVE STANDARD PARTS FOR FASTENING out out
ABP0-2017 SUPPLY OF ALUMINIUM PLATE WITH ULTRASONIC FLAW DETECTION out out
ABP0-2018 SUPPLY OF CASTINGS out out
ABP0-2019 SUPPLY OF FORGINGS out out
ABP0-2020 SUPPLY OF PLASTIC COMPONENTS out out
ABP0-2021 SUPPLY OF HIGHLY STRESSED EXTRUSIONS out out
ABP1-1022 HARD ANODISING OF ALUMINIUM CP AC7108 & AC7108/8
ABP1-1023 CHROMIC ACID ANODISING OF ALUMINIUM CP AC7108 & AC7108/8
ABP1-1024 SULPHURIC ACID ANODISING OF ALUMINIUM CP AC7108 & AC7108/8
ABP1-1025 SULPHURIC ACID ANODISING OF TITANIUM CP AC7108 & AC7108/8
ABP1-2026 SHOT PEEN FORMING AND DISTORTION CORRECTION OF METAL PARTS SE - Not mandated AC7117 & AC7117/3
ABP1-2028 SHOT PEENING FOR IMPROVED FATIGUE AND STRESS CORROSION RESISTANCE SE AC7117 & AC7117/1 & AC7117/2 & AC7117/5
ABP1-2029 SURFACE IMPROVEMENT USING GLASS BEADS SE AC7117 & AC7117/2 & AC7117/5
ABP1-2030 SURFACE IMPROVEMENT USING ROTARY FLAP PEENING SE AC7117 & AC7117/4
ABP1-2035 COLD WORKING OF HOLES ASA AC7135
ABP1-2343 SPLIT MANDREL COLD WORKING OF HOLES ASA AC7135
ABP1-2344 CLEANING AND SURFACE IMPROVEMENT BY BLASTING CP or SE AC7108 or AC7117
ABP1-2353 SHOT PEENING GENERAL REQUIREMENTS SE AC7117
ABP1-3037 DEPOSITION COATING USING THE DETONATION GUN OR HIGH VELOCITY OXY-FUEL PROCESSES out out
ABP1-3038 DEPOSITION OF ZINC BY SPRAYING out out
ABP1-3039 DEPOSITION OF ALUMINIUM SPRAYING out out
ABP1-3334 DEPOSITION OF TITANIUM NITRIDE BY PHYSICAL VAPOUR DEPOSITION (PVD) out out
ABP1-4040 CADMIUM PLATING WITH A PORTABLE NON-IMMERSION ELECTROPLATING SYSTEM CP AC7108 & AC7108/13
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 4
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
ABP1-4041 CADMIUM PLATING OF STEELS NICKEL ALLOYS & COPPER ALLOYS CP AC7108 & AC7108/9
ABP1-4042 HARD CHROMIUM PLATING CP AC7108 & AC7108/9
ABP1-4043 ZINC PLATING OF STEELS & COPPER ALLOYS CP AC7108 & AC7108/9
ABP1-4044 TEMPORARY PROTECTION AGAINST SURFACE DAMAGE CP AC7108
ABP1-4045 COATING OF ALUMINIUM BY ELECTROSTATICALLY SPRAYING WITH NYLON OR EPOXY out out
ABP1-4046 TEMPORARY PROTECTION OF METALLIC MATERIALS AGAINST CORROSION CP AC7108
ABP1-4047 COATING OF METALLIC MATERIALS WITH NYLON CP AC7108 & AC7108/1
ABP1-4049 PREPARATION OF METALLIC MATERIALS FOR PLATING CP AC7108
ABP1-4053 SODIUM ALGINATE TEMPORARY RELEASE AGENTS out out
ABP1-4054 RELEASE AGENTS FOR SPECIFIED PURPOSES COMP AC7118
ABP1-4055 COATING WITH HEAT CURED LUBRICANT CP AC7108
ABP1-4327 COATING OF BOLTS AND FASTENERS WITH LUBRICANT PRIOR TO FASTENING ASA AC7135 & AC7135/1
ABP1-5056 PHOSPHATING OF STEEL CP AC7108 & AC7108/11
ABP1-5057 CONVERSION COATING OF ALUMINIUM CP AC7108 & AC7108/11
ABP1-5058 CHROMATE PASSIVATION OF CADMIUM AND ZINC CP AC7108
ABP1-5062 PASSIVATION OF STEELS AND NICKEL ALLOYS CP AC7108 & AC7108/12
ABP2-1063 AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH PRE-FORMED SOLID RIVETS ASA AC7135 & AC7135/1
ABP2-1064 AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS ( DRIVMATIC ) ASA AC7135 & AC7135/1
ABP2-1065 RIVETING WITH BLIND NUT PLATE RIVETS ASA AC7135 & AC7135/1
ABP2-1066 RIVETING WITH BLIND STEM LOCK RIVETS ( AVDEL ) ASA AC7135 & AC7135/1
ABP2-1067 RIVETING WITH BLIND RIVETS ASA AC7135 & AC7135/1
ABP2-1068 RIVETING WITH BLIND RIVETS ( CHOBERT ) ASA AC7135 & AC7135/1
ABP2-1069 RIVETING WITH BLIND FLUSH BREAK RIVETS ( AVDEL MBC ) ASA AC7135 & AC7135/1
ABP2-1070 AUTOMATED RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS ( LVER ) ASA AC7135 & AC7135/1
ABP2-1071 MILLING THE HEADS OF RIVETS AFTER RIVETING ASA AC7135
ABP2-1072 MANUAL RIVETING WITH PRE-FORMED SOLID RIVETS ASA AC7135 & AC7135/1
ABP2-1347 MANUAL RIVETING OF ALUMINIUM STRUCTURE WITH SLUG RIVETS (LVER HAND GUNS) INTO DOUBLE ASA AC7135 & AC7135/1
ABP2-2073 COUNTERSINK HOLES
MANUAL FASTENING WITH SELF LOCKING BLIND BOLTS ASA AC7135 & AC7135/1
ABP2-2074 MANUAL FASTENING WITH POINT DRIVE BOLTS ASA AC7135 & AC7135/1
ABP2-2075 MANUAL FASTENING WITH SHORT THREAD POINT DRIVE BOLTS ASA AC7135 & AC7135/1
ABP2-2076 MANUAL FASTENING WITH QUICK RELEASE FASTENERS ( CAMLOC ) ASA AC7135 & AC7135/1
ABP2-2077 MANUAL FASTENING WITH BLIND BOLTS ( COMPOSI-LOK ) ASA AC7135 & AC7135/1
ABP2-2078 MANUAL FASTENING WITH QUICK RELEASE FASTENERS ( DZUS ) ASA AC7135 & AC7135/1
ABP2-2079 MANUAL FASTENING WITH PULL TYPE LOCK BOLTS ASA AC7135 & AC7135/1
ABP2-2080 MANUAL FASTENING WITH BLIND BOLTS ( JO-BOLTS ) ASA AC7135 & AC7135/1
ABP2-2081 MANUAL FASTENING WITH 4-START QUICK RELEASE FASTENERS ASA AC7135 & AC7135/1
ABP2-2082 SHRINK FITTING OF BOLTS BUSHES PINS AND OTHER FASTENING PARTS ASA AC7135 & AC7135/1
ABP2-2083 MANUAL FASTENING WITH TAPERED SHANK BOLTS ( TAPER LOK ) ASA AC7135 & AC7135/1
ABP2-2084 MANUAL FASTENING INTO PARALLEL INTERFERENCE FIT HOLES ASA AC7135 & AC7135/1
ABP2-2085 II AUTOMATED FASTENING WITH STUMP TYPE LOCKBOLTS ASA AC7135 & AC7135/1
ABP2-2086 MANUFACTURE OF SERRATED FASTENING PARTS FOR LOCKING ( STA-LOK NUT ) ASA AC7135 & AC7135/1
ABP2-2087 FASTENING OF JOINTS CONTAININGSEALANT BY TORQUE TIGHTENING ASA AC7135 & AC7135/1
ABP2-2333 MANUFACTURE AND INSPECTION OF ROLLED THREADS ON FASTENINGPARTS AND COMPONENTS ASA AC7135 & AC7135/1
ABP2-2336 COMMON REQUIREMENTS FOR INSTALLING BOLTS, STUDS, NUTS AND OTHER FASTENING PARTS. ASA AC7135 & AC7135/1
ABP2-2337 MANUAL FASTENING WITH SINGLE ACTION LOCKING BLIND BOLTS ASA AC7135 & AC7135/1
ABP2-3088 INSTALLATION OF COLD EXPANDED RETAINERS ASA AC7135
ABP2-3089 INSTALLING METALLIC INSERTS ( SHUR-LOK - HOT MELT ) ASA or COMP AC7135 or AC7118 PAR
ABP2-3090 INSTALLING ALUMINIUM TWO-PART INSERTS ( SHUR-LOK ) ASA or COMP AC7135 or AC7118 PAR
ABP2-3091 LOCKING AND REMOVAL OF SERRATED FASTENING PARTS ( STA-LOK NUT ) ASA AC7135 & AC7135/1
ABP2-3092 LOCKING OF FASTENING PARTS USING TAB WASHERS ASA AC7135 & AC7135/1
ABP2-3093 LOCKING OF FASTENING PARTS USING ANAEROBIC MATERIALS ASA AC7135 & AC7135/1
ABP2-3094 INSTALLING METALLIC INSERTS ( SHUR-TAB ) ASA or COMP AC7135 or AC7118 PAR
ABP2-3095 INSTALLING METALLIC INSERTS ( ACRES SLEEVES ) ASA or COMP AC7135 or AC7118 PAR
ABP2-3096 LOCKING OF FASTENING PARTS USING WIRELOCKING ASA AC7135 & AC7135/1
ABP2-3097 PREPARATION OF COUNTERSUNK HOLES IN METALLIC MATERIALS FOR FASTENING AND RIVETING ASA AC7135 & AC7135/1
ABP2-4098 QUALIFICATION OF RESISTANCE WELDING MACHINES AND WELD SCHEDULES WELD AC7110 & AC7110/4
ABP2-4099 APPROVAL OF WELDING AND BRAZING OPERATORS WELD AC7110 & AC7110/12
ABP2-4100 ELECTRIC RESISTANCE WELDING WELD AC7110 & AC7110/4
ABP2-4102 TUNGSTEN INERT GAS ( TIG ) WELDING WELD AC7110 & AC7110/5
ABP2-4103 PLASMA ARC WELDING WELD AC7110 & AC7110/5
ABP2-4104 ELECTRON BEAM WELDING WELD AC7110 & AC7110/3
ABP2-4105 MANUAL BRAZING OF STEELS COPPER AND NICKEL ALLOYS WELD AC7110 & AC7110/1
ABP2-4106 MANUAL BRAZING OF ALUMINIUM USING SILICON ROD WELD AC7110 & AC7110/1
ABP2-4107 SOLDERING out out
ABP2-4355 ACCEPTANCE STANDARDS FOR TUNGSTEN INERT GAS ( T.I.G.) & PLASMA ARC WELDING ( P.A.W.) PROCESSES WELD AC7110 & AC7110/5
ABP2-4358 RESISTANCE WELDING OF THERMOPLASTIC MATERIALS out out
ABP3-1108 SURFACE PROTECTION DURING HEAT TREATMENT HT AC7102
ABP3-1109 HEAT TREATMENT CONTROL TEST PIECES HT AC7102
ABP3-1110 THE USE OF POLYALKYLENE GLYCOL QUENCHANT DURING HEAT TREATMENT HT AC7102
ABP3-1112 THE STOPPING-OFF OF STEELS DURING HEAT TREATMENT HT AC7102
ABP3-1114 NITRIDING OF STEELS HT AC7102 & AC7102/4
ABP3-1115 STRESS RELIEVING HEAT TREATMENT OF STEELS AND NICKEL ALLOYS HT AC7102
ABP3-1116 HEAT TREATMENT OF STEELS HT AC7102
ABP3-1117 HEAT TREATMENT OF TITANIUM HT AC7102
ABP3-1118 HEAT TREATMENT OF RIVETS PRIOR TO RIVETING HT AC7102 & AC7102/2
ABP3-1119 HEAT TREATMENT OF ALUMINIUM HT AC7102 & AC7102/2
ABP3-1120 REFRIGERATED STORAGE OF ALUMINIUM AFTER HEAT TREATMENT HT AC7102 & AC7102/2
ABP3-1366 CARBURISING AND CARBO-NITRIDING AND HEAT TREATMENT OF CARBURISING STEELS. HT AC7102 & AC7102/3
ABP4-1121 APPLICATION OF BONDING PRIMER AS EROSION RESISTANT COATING CP AC7108 & AC7108/1
ABP4-1123 APPLICATION OF CORROSION INHIBITING PRIMER TO AN INTERNAL OR EXTERNAL SURFACE CP AC7108 & AC7108/1
ABP4-1352 APPLICATION OF CHROMATE-FREE PRIMER AS A SEALING COAT FOR A380 WING TRANSPORTATION out out
ABP4-2124 APPLICATION OF ABRASION RESISTANT PAINT CP AC7108 & AC7108/1
ABP4-2125 APPLICATION OF ANTI-STATIC PAINT TO COMPOSITES EXCLUDING CARBON FIBRE CP AC7108 & AC7108/1
ABP4-2126 APPLICATION OF POLYURETHANE FINISH PAINTS TO AN INTERNAL OR EXTERNAL SURFACE CP AC7108 & AC7108/1
ABP4-2127 APPLICATION OF FLEXIBLE FINISH PAINT SCHEME INCORPORATING A CHROMATED PRIMER TO AN EXTERNAL CP AC7108 & AC7108/1
ABP4-2128 SURFACE
APPLICATION OF POLYURETHANE PAINTS AND VARNISHES FOR OVERCOATING OF SEALANTS AND PART CP AC7108 & AC7108/1
ABP4-2130 MARKINGS AND
APPLICATION OFFOR IDENTIFICATION
FLEXIBLE PURPOSES
FINISH PAINT TO AN INTERNAL SURFACE CP AC7108 & AC7108/1
ABP4-2131 APPLICATION OF HIGH TEMPERATURE STOVE ENAMEL PAINT TO STEELS CP AC7108 & AC7108/1
ABP4-2133 APPLICATION OF EROSION RESISTANT PAINT CP AC7108 & AC7108/1
ABP4-2361 APPLICATION OF ANTI-SLIP EMERGENCY & WALKWAY PAINTS CP AC7108 & AC7108/1
ABP4-2364 APPLICATION OF FLEXIBLE FINISH PAINT SCHEME INCORPORATING A CHROMATE-FREE PRIMER TO AN EXTERNAL CP AC7108 & AC7108/1
ABP4-3135 SURFACE
APPLICATION OF FILLER TO SMALL HOLES CP AC7108 & AC7108/1
ABP4-3136 APPLICATION OF PASTE FILLER FOR GAP FILLING AND SHIMMING ASA AC7135 & AC7135/4
ABP4-3137 APPLICATION OF FILLER FOR GAP FILLING ( HERMETITE DOUBLE BOND ) ASA AC7135 & AC7135/4
ABP4-3138 APPLICATION OF EPOXY FILLER TO HOLES ASA AC7135 & AC7135/4
ABP4-3329 APPPLICATION OF AERODYNAMIC FILLER SEALANT ASA AC7135 & AC7135/4
ABP4-3350 APPLICATION OF PINHOLE FILLER CP AC7108 & AC7108/1
ABP4-4139 STRIPPING OF PAINTS BY BLASTING ( PAINTBLAST ) CP AC7108 & AC7108/14
ABP4-4140 STRIPPING OF PAINTS BY CHEMICAL METHODS CP AC7108 & AC7108/14
ABP4-5141 APPLICATION OF SEALANT FOR INTEGRAL FUEL TANKS ASA AC7135 & AC7135/4
ABP4-5142 APPLICATION OF SEALANT FOR GENERAL AIRCRAFT STRUCTURE ASA AC7135 & AC7135/4
ABP4-5143 APPLICATION OF HIGH TEMPERATURE SILICONE SEALANT ASA AC7135 & AC7135/4
ABP4-5144 APPLICATION OF NON-HARDENING JOINTING COMPOUNDS AS SEALANT ASA AC7135 & AC7135/4
ABP4-5145 APPLICATION OF NON HARDENING JOINTING COMPOUNDS ASA AC7135 & AC7135/4
ABP4-5365 APPLICATION METHODS FOR THE USE OF SEALANT FOAM out out
ABP5-1146 PREPARATION OF METALLIC MATERIALS FOR ADHESIVE BONDING COMP AC7118 MB
ABP5-1147 PREPARATION OF RUBBER FOR ADHESIVE BONDING COMP AC7118 PAR
ABP5-1148 PREPARATION OF PTFE FOR ADHESIVE BONDING COMP AC7118 PAR
ABP5-1149 ADHESIVE BONDING WITH TWO PART EPOXY.( HYSOL AND 3M ) out out
ABP5-1152 ADHESIVE BONDING USING SEALANT COMP AC7118 PAR
ABP5-1153 ADHESIVE BONDING OF SILICONE RUBBER WITH SILICONE ADHESIVE out out
ABP5-1155 ADHESIVE BONDING WITH TWO PART NEOPRENE ( BOSTIK 2402 ) out out
ABP5-1158 ADHESIVE BONDING WITH TWO PART EPOXY (ARALDITE) out out
ABP5-1159 ADHESIVE BONDING WITH ONE PART HEAT CURING EPOXY ( EC2214 ) out out
ABP5-1160 ADHESIVE BONDING WITH TWO PART EPOXY ( REDUX 410NA ) out out
ABP5-1161 ADHESIVE BONDING WITH ONE PART NEOPRENE (EVOSTIK 528) COMP AC7118 PAR
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 5
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
ABP5-1162 ADHESIVE BONDING WITH TWO PART ACRYLIC out out
ABP5-1164 ADHESIVE BONDING OF CURED FIBRE REINFORCED COMPOSITES out out
ABP5-1165 ADHESIVE BONDING OF ACRYLIC ( TENSOL CEMENTS ETC. ) out out
ABP5-1351 SURFACE PREPARATION PRIOR TO APPLICATION OF PAINTS CP AC7108 & AC7108/1
ABP6-1166 INSTALLATION COUPLINGS (GAMAH) out out
ABP6-1167 COMMON REQUIREMENTS FOR THE MANUFACTURE TESTING AND INSTALLING OF PIPES out out
ABP6-1168 INSTALLING COUPLINGS ( PERI-SEAL ) out out
ABP6-1170 INSTALLING COUPLINGS ( HITEMP-RAFLEX ) out out
ABP6-1173 MAINTENANCE AND INSTALLING COUPLINGS ( JANITROL ) out out
ABP6-1174 INSTALLING COUPLINGS ON PIPES (PERMASWAGE) out out
ABP6-1177 SWAGING OF NON OXYGEN PIPES AND COUPLINGS out out
ABP6-1178 SWAGING OF METRIC PIPES AND COUPLINGS ( SBAC ) out out
ABP6-1179 SWAGING OF LOW PRESSURE PIPES AND COUPLINGS out out
ABP6-1180 INSTALLING COUPLINGS ( AEROQUIP J13 ) out out
ABP6-1182 INSTALLING AND REMOVING O CLIPS USED WITH HOSES out out
ABP6-2183 MACHINING COMPOSITES COMP AC7118 PAR
ABP6-2184 MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( GENERAL ) out out
ABP6-2185 MANUFACTURE OF CARBON-FIBRE EPOXY PREPREG COMPOSITES BY AUTOCLAVE COMP AC7118 PAR + CP
ABP6-2186 MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES (BSL 312) COMP AC7118 MB
ABP6-2187 MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES (R382) COMP AC7118 MB
ABP6-2188 MANUFACTURE OF GLASS-FIBRE EPOXY PREPREG COMPOSITES BY VACUUM BAG COMP AC7118 PAR
ABP6-2189 MANUFACTURE OF GLASS-FIBRE AND ARAMID-FIBRE EPOXY PREPREG COMPOSITES BY AUTOCLAVE COMP AC7118 PAR + CP
ABP6-2190 MANUFACTURE OF GLASS-FIBRE PHENOLIC PREPREG COMPOSITES BY AUTOCLAVE COMP AC7118 PAR
ABP6-2191 MANUFACTURE OF GLASS-FIBRE PHENOLIC PREPREG COMPOSITES BY VACUUM BAG COMP AC7118 PAR
ABP6-2192 MANUFACTURE OF GLASS-FIBRE POLYESTER PREPREG COMPOSITES COMP AC7118 PAR
ABP6-2193 MANUFACTURE OF CARBON-FIBRE COMPOSITES BY FILAMENT WINDING out out
ABP6-2194 MANUFACTURE OF CARBON-FIBRE COMPOSITES BY LOWPRESSURE MOULDING out out
ABP6-2195 MANUFACTURE OF GLASS-FIBRE PHENOLIC RESIN COMPOSITES BY WET LAY-UP out out
ABP6-2196 MANUFACTURE OF GLASS-FIBRE EPOXY PREPREG COMPOSITES BY PRESS CURING out out
ABP6-2197 MANUFACTURE OF NON-METALLIC POLYESTER TUBING BY HEAT FORMING out out
ABP6-2198 MANUFACTURE OF NON-METALLIC POLYCARBONATE SHEET BY HEAT FORMING out out
ABP6-2199 INSTALLING OF FITTINGS TO NON-METALLICPOLYESTER TUBING out out
ABP6-2200 MANUFACTURE OF NON-METALLIC POLYETHERSULPHONE SHEETBY HEAT FORMING out out
ABP6-2326 MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( REDUX 308 ) COMP AC7118 MB
ABP6-2328 MANUFACTURE OF ALUMINIUM SKINNED HONEYCOMB COMPOSITES ( ARALDITE 15+1 ) COMP AC7118 MB
ABP6-2348 MANUFACTURE OF CARBON, GLASS, OR ARAMID-FIBRE EPOXY COMPOSITES BY RESIN FILM INFUSION COMP AC7118 LRP + CP
ABP6-2356 THE MANUFACTURE OF THERMOPLASTIC COMPOSITES BY THE LAY UP TECHNIQUE out out
ABP6-2357 THE MANUFACTURE OF THERMOPLASTIC COMPOSITES BY THE RUBBER PRESS MOULDING OF FIBRE out out
ABP6-2360 REINFORCED
MANUFACTURE THERMOPLASTIC SHEET
OF CARBON, GLASS, OR ARAMID-FIBRE EPOXY COMPOSITES BY LIQUID RESIN INFUSION COMP AC7118 LRP + CP
ABP6-3201 GENERAL INSTRUCTIONS FOR THE FABRICATION OF WROUGHT ALUMINIUM out out
ABP6-3202 GENERAL INSTRUCTIONS FOR THE FABRICATION OF WROUGHT TITANIUM out out
ABP6-3203 AUTOMATED DEBURRING DURING FABRICATION out out
ABP6-3204 RECTIFICATION OF SCRATCHES ON AN ALUMINIUM CLAD SURFACE DURING FABRICATION out out
ABP6-3205 FABRICATION AND DEBURRING OF HOLES IN METALLIC MATERIALS ASA AC7135
ABP6-3206 RECTIFICATION OF DISTORTED ALUMINIUM DURING FABRICATION SE - Not mandated AC7117
ABP6-3207 RETENTION OF BEARINGS BY EPOXY ADHESIVE ASA AC7135 & AC7135/3
ABP6-3208 RETENTION OF BEARINGS AND BUSHES BY ANAEROBIC MATERIALS ASA AC7135 & AC7135/3
ABP6-3209 RETENTION OF BEARINGS BY STAKING ASA AC7135 & AC7135/3
ABP6-3210 GENERAL INSTRUCTIONS FOR THE FABRICATION OF HIGH TENSILE STEELS out out
ABP6-3211 RETENTION OF BEARINGS BY SWAGING ASA AC7135 & AC7135/3
ABP6-3212 GENERAL INSTRUCTIONS FOR THE FABRICATION OF COPPER BERYLLIUM out out
ABP6-3213 SWAGING OF CABLES out out
ABP6-3214 SWAGING OF TUBES AND CONTROL CABLES out out
ABP6-3215 FABRICATION OF COUNTERSUNK HOLES IN METALLIC MATERIALS BY HOT DIMPLING ASA AC7135
ABP6-3216 IMPREGNATION OF ALUMINIUM AND MAGNESIUM ALLOY CASTINGS DURING FABRICATION out out
ABP6-3217 SCRAGGING OF HELICAL COMPRESSION SPRINGS DURING FABRICATION out out
ABP6-3218 SWAGING OF CABLES ( TALURIT ) out out
ABP6-3219 FABRICATION BY SUPERPLASTIC FORMING AND DIFFUSION BONDING out out
ABP6-3345 LIMITS FOR MACHINING FEATURES out out
ABP6-3349 LASER CUTTING NM AC7116 & AC7116/4
ABP6-4220 INSTALLING OF CONDUCTIVE RFI GASKETS AND SEALS out out
ABP6-4221 MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT out out
ABP6-5222 PRESSURE TESTING OF ASSEMBLED PIPES out out
ABP6-5223 TESTING OF CLAD THICKNESS ON ALUMINIUM SHEET AND PLATE out out
ABP6-5224 TESTING OF ALUMINIUM ALLOYS BY ELECTRICAL CONDUCTIVITY HT AC7102 & AC7102/5
ABP6-5225 TESTING OF STEELS AFTER MACHINING BY ETCH INSPECTION CP AC7108 & AC7108/2
ABP6-5226 HARDNESS TESTING OF METALLIC MATERIALS MTL AC7101 & AC7101/5
ABP6-5227 INSPECTION OF ALUMINIUM FORGINGS out out
ABP6-5228 INSPECTION OF TITANIUM FORGINGS out out
ABP6-5229 TESTING BY MAGNETIC PARTICLE FLAW DETECTION NDT AC7114 & AC7114S & AC7114/2 & AC7114/2S
ABP6-5230 TESTING BY PENETRANT FLAW DETECTION NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
ABP6-5231 TESTING OF ALUMINIUM SKINNED HONEYCOMB BONDING FORDIS-BONDING out out
ABP6-5232 TESTING BY ULTRASONIC FLAW DETECTION NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
ABP6-5233 TESTING COMPOSITES BY ULTRASONIC FLAW DETECTION NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
ABP6-5346 TESTING BY RADIOGRAPHY NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
ABP7-1234 ASSEMBLY OF COAXIAL CONTACTS ( ARINC 404A AND 600 ) out out
ABP7-1235 ASSEMBLY AND WIRING OF FIRE RESISTANT BULKHEAD SEALS ( NSA 934502 - 13 ) out out
ABP7-1236 ASSEMBLY OF CABLE TO PRESSURE SEALS out out
ABP7-1237 ASSEMBLY OF FIRE SEALS out out
ABP7-1238 ASSEMBLY OF PRESSURE SEALS WITH SEALANT FILLING out out
ABP7-1239 ASSEMBLY OF RACEWAYS AND CABLE LOOMS INTO RACEWAYS out out
ABP7-1240 ASSEMBLY OF HEAT SHRINKABLE MOULDED PARTS out out
ABP7-1241 ASSEMBLY OF COMPONENTS TO PRINTED CIRCUIT BOARDS ETG AC7120 & AC7120/2 & AC7120/7 & AC7120/10
ABP7-1242 ASSEMBLY OF CABLE TO PRESSURE SEALS ( HELLERMAN DEUTSCH ) out out
ABP7-1243 ASSEMBLY AND HANDLING OF STATIC SENSITIVE DEVICES out out
ABP7-1244 ASSEMBLY AND LINING OF METALLIC CONDUITS FOR ELECTRICAL CABLE out out
ABP7-1245 ELECTRICAL BONDING AND EARTHING FOR AIRBUS REQUIREMENTS DURING ASSEMBLY ASA AC7135 & AC7135/2
ABP7-1246 ELECTRICAL BONDING AND EARTHING FOR AIRBUS REQUIREMENTS DURING ASSEMBLY ASA AC7135 & AC7135/2
ABP7-1247 REPAIR OF PRINTED CIRCUIT BOARDS BY REMOVAL AND REPLACEMENT OF COMPONENTS ETG AC7120
ABP7-1248 ASSEMBLY AND MANUFACTURE OF PRINTED CIRCUIT BOARDS ETG AC7119
ABP7-1249 REPAIR OF KAPTON INSULATED PTFE WRAPPED CABLE out out
ABP7-1250 ASSEMBLY AND POTTING OF ELECTRICAL COMPONENTS WITH SEALANT ASA AC7135 & AC7135/4
ABP7-1251 ASSEMBLY AND FITTING OF NYLON AND P.T.F.E GROMMETS (FLEXIFORM) out out
ABP7-1252 ELECTRICAL ASSEMBLY BY SOLDERING out out
ABP7-1253 ASSEMBLY AND MANUFACTURE USING WIRE-WRAP METHODS out out
ABP7-1254 TORQUE TIGHTENING OF ELECTRICAL CONNECTIONS AND COMPONENTS DURING ASSEMBLY out out
ABP7-1330 ASSEMBLY OF CABLE BUNDLES THROUGH A PRESSURE BUNG (ABS0834 ) out out
ABP7-1342 LOCAL REFERENCE DOCUMENT (CONTACT & CRIMP TOOL & LOCATOR & PROCESS) out out
ABP7-1362 A330/340 WING-TIP HARNESS ASSEMBLY INSTRUCTIONS out out
ABP7-2255 STRIPPING OF ELECTRICAL WIRING AND CABLE out out
ABP7-2256 STRIPPING OF ELECTRICAL WIRING (FE0300 & W-200A STRIPPING TOOLS) out out
ABP7-2359 AUTO-CUTTING MACHINE out out
ABP7-3258 CRIMPING OF CONTACTS ( AMP MATE-N-LOK ) out out
ABP7-3259 CRIMPING OF CONTACTS ( TRI-STAR PORTA TAC ) out out
ABP7-3260 CRIMPING OF POST INSULATED TERMINALS AND IN-LINE SPLICES out out
ABP7-3261 CONTROL OF HAND CRIMPING TOOLS out out
ABP7-4262 CRIMPING OF CONTACTS ( RAYCHEM TERMINATION MTC ) out out
ABP7-4263 SOLDERING OF CONTACTS (RAYCHEM TERMINATION MTC) out out
ABP7-4266 CRIMPING OF CABLE TERMINATION ( AMP ) out out
ABP7-5267 ASSEMBLY OF CABLE TO MINIATURE CONNECTORS ( AMPHENOL ) out out
ABP7-5268 ASSEMBLY OF CABLE TO CONNECTORS ( NAS 1599 ) out out
ABP7-5269 ASSEMBLY OF CABLE TO HIGH TEMPERATURE CONNECTORS out out
ABP7-5270 ASSEMBLY OF CIRCULAR CONNECTORS out out
ABP7-5271 ASSEMBLY OF CO-AXIAL CONNECTORS ( BNC - TNC - C - N AND HN ) out out
ABP7-5272 ASSEMBLY OF CONNECTORS ( FENWAL ) out out
ABP7-5273 ASSEMBLY OF RECTANGULAR CONNECTORS out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 6
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
ABP7-5274 ASSEMBLY OF CABLE TO CONNECTORS (CANNON CA-KE) out out
ABP7-5275 ASSEMBLY AND MOUNTING OF CONNECTORS ON FUEL TANKS out out
ABP7-6276 IDENTIFICATION OF WIRING WITH PRINTED CODES ( TAB AND KINGSLEY ) out out
ABP7-6277 IDENTIFICATION OF WIRING WITH PRINTED CODES (KINGSLEY A23T) out out
ABP7-6278 IDENTIFICATION OF WIRING WITH UV PRINTED CODES ( BAE EXIMARK ) out out
ABP7-6279 IDENTIFICATION OF WIRING WITH RUBBER SLEEVES, AND INSTALLATION out out
ABP7-7280 FITTING OF HEAT SHRINK SLEEVES SOLDER SLEEVES AND EDGING STRIP SOLDERING out out
ABP7-7281 PRINTING OF SLEEVES AND NON-METALLIC LABELS ( THERMO-FIT TMS ) out out
ABP7-8282 INSTALLATION OF SPIRAL BINDING FOR LOOMS out out
ABP7-8283 ASEMBLY AND CONNECTION OF RAIL MOUNTED MODULE & TERMINAL BLOCKS AND RELAY BASES out out
ABP7-8284 INSTALLATION OF CABLE TIES ( INSULOK ) out out
ABP7-8285 INSTALLATION OF CABLE TIES ( TY-RAP ) out out
ABP7-8286 INSTALLATION OF CABLE TIES ( PANDUIT ) out out
ABP7-9287 TESTING AND CHECKING OF LOOMS out out
ABP7-9288 TESTING AND CHECKING OF CRIMPING TOOLS out out
ABP7-9289 CABLE HANDLING STOWAGE AND STORAGE out out
ABP8-1290 CLEANING AND DEGREASING OF METALLIC MATERIALS (ALKALINE) CP AC7108
ABP8-1291 CLEANING OF ALUMINIUM ALLOYS AFTER BRAZING WELD AC7110 & AC7110/1
ABP8-1293 CLEANING OF PIPES out out
ABP8-1294 SOLVENT CLEANING AND DEGREASING OF MATERIALS CP AC7108
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
ABP8-1296 DEOXIDATION OF ALUMINIUM ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
ABP8-1354 LOCAL CLEANING AND DEGREASING USING AQUEOUS CLEANERS CP AC7108
ABP8-2297 PICKLING OF ALUMINIUM ALLOYS AS A PRE-TREATMENT CP AC7108 & AC7108/12
ABP8-2298 PICKLING OF STAINLESS STEELS AND NICKEL ALLOYS CP AC7108 & AC7108/12
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
ABP8-2299 PICKLING OF TITANIUM ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
ABP8-2300 PICKLING OF COPPER ALLOYS CP AC7108 & AC7108/12
ABP8-2301 PICKLING OF ALUMINIUM ALLOYS FOR METAL REMOVAL CP AC7108
ABP8-2302 ANODIC PICKLING OF STEELS CP AC7108 & AC7108/12
ABP8-2303 PICKLING OF ALUMINIUM ALLOYS ( ALMECO 100 ) CP AC7108 & AC7108/12
ABP8-3304 CHEMICAL CONTOURING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/5
ABP8-3306 CHEMICAL CONTOURING OF TITANIUM ANS ITS ALLOYS CP AC7108 & AC7108/5
ABP8-4309 MASKANTS FOR CHEMICAL CONTOURING AND CHEMICAL TREATMENTS CP AC7108 & AC7108/5
ABP9-1311 MARKING BY IMPRESS STAMPING out out
ABP9-1312 MARKING BY MACHINE ENGRAVING out out
ABP9-1313 MARKING BY CONTROLLED TIP VIBRO ENGRAVING out out
ABP9-1314 MARKING BY SHARP TIP VIBRO ENGRAVING out out
ABP9-1315 MARKING BY RAISED AND INSET METHODS out out
ABP9-1316 MARKING BY IMPRESS STAMPING ( BORRIES ) out out
ABP9-1363 MARKING OF METALLIC LABELS/INFORMATION PLACARDS BY MARKTRONIC INDENTATION DOT MARKING out out
ABP9-2317 MARKING BY SELF ADHESIVE LABELS out out
ABP9-2318 MARKING BY BAG AND LABELS out out
ABP9-2319 MARKING BY METAL TAG LABELS out out
ABP9-2320 MANUFACTURING AND APPLICATION OF PHOTOSENSITIVE MARKING LABELS out out
ABP9-3321 ELECTRO - CHEMICAL MARKING out out
ABP9-3322 INK MARKING ( BLEED THROUGH ) out out
ABP9-3323 INK MARKING GENERAL out out
ABP9-4324 CONTROL OF MARKING SPECIFICATIONS out out
ABP9-4325 PROTECTION OF MARKING BY THE APPLICATION OF POLYURETHANE PAINTS AS OVERCOATING out out
ADET0000 ETABLISSEMENT, GESTION ET APPLICATION DES DOSSIERS D EXIGENCES TECHNIQUES out out
ADET0001 REPERTOIRE GENERAL DES DOSSIERS D EXIGENCES TECHNIQUES out out
ADET0002 ALUMINIUM ALLOY 2024 THICK PLATES CONDITION T 351 out out
ADET0003 ALUMINIUM ALLOY 7075 THICK PLATES CONDITION T651 out out
ADET0004 CLASSIFICATION ET SUIVI DES ENSEMBLES ET ELEMENTS COMPOSITES CARBONE & RESINE ET ARAMIDE & RESIN out out
ADET0007 ASSEMBLAGES TENON & MORTAISE DE STRUCTURES COMPOSITES ASA AC7135
ADET0008 BILLES DE GRENAILLAGE EN CERAMIQUE out out
ADET0009 METALLISATION DE TROUS DE FIXATIONS POUR LA VOILURE CARBONE ATR72 out out
ADET0010 APPLICATION DE PEINTURE ANTIDERAPANTE INTERIEUR AVION CP AC7108 & AC7108/1
ADET0012 SPECIFICATION DE PROCEDE - PROTECTION A BASE D ALUMINIUM POUR FIXATIONS CP AC7108
ADET0013 SPECIFICATION LUBRIFICATION DE LA BOULONNERIE A L ALCOOL CETYLIQUE ASA AC7135
ADET0015 CORPS DE BIELLES RETREINTES EN ALLIAGE D ALUMINIUM POUR UTILISATION EN SYSTEMES out out
ADET0016 CABLES SOUPLES EQUIPES D EMBOUTS SERTIS out out
ADET0018 GRENAILLAGE DE PRECONTRAINTE DES ALLIAGES D ALUMINIUM (REPLACED BY AIPS02-02-004) SE AC7117 & AC7117/3 & AC7117/5
ADET0019 FOR LIGHT ALLOY CYLINDRICAL BODY RODS ASA AC7135
ADET0020 EXPANSION A FROID DES ALESAGES DANS LES ALLIAGES D ALUMINIUM CORROYES ASA AC7135
ADET0021 SPECIFICATION TECHNIQUE D APPROVISIONNEMENT DES TUBES ROULES ET SOUDES EN TA6V POUR BATIS out out
ADET0022 ATR42-ATR72 TECHNIQUE D APPROVISIONNEMENT ET DE QUALIFICATION DES BIELLES METALLIQUES DE
SPECIFICATION out out
ADET0024 STRUCTURE EN ALLIAGE
ECROUS ORDINAIRES D ALUMINIUM
POUR VIS A FILETAGE COURT A EMPREINTE EN CREUX COTE FILETAGE ASA AC7135
ADET0025 POSE DES FIXATIONS SUR MASTIC INTERCALAIRE NON POLYMERISE ASA AC7135
ADET0026 DECORATION DES PANNEAUX STRATIFIES PAR FILM DECORATIF PVF out out
ADET0027 CHROMAGE DUR PAR DEPOT ELECTROLYTIQUE RECTIFIE SUR PIECES EN ACIER ET ALLIAGES DE NICKEL CP AC7108 & AC7108/9
ADET0028 SPECIFICATION POUR ESSAIS DE QUALIFICATION TIMBRES ET RUBANS DE FIXATION ( TYPE AUTO-AGRIPANT ) out out
ADET0029 POUR ISOLATION
MONTAGE THERMIQUE
DES BOULONS CYLINDRIQUES DE CISAILLEMENT ASA AC7135 & AC7135/1
ADET0030 COUPLES DE SERRAGE DE LA BOULONNERIE STRUCTURALE ASA AC7135
ADET0031 FINITION DES PIECES EN ALLIAGES D ALUMINIUM ( EBAVURAGE, CASSAGE D ANGLE OU RAYONNAGE ) out out
ADET0032 POSE ER PROTECTION DES ETIQUETTES D IDENTIFICATION EN ZONE SKYDROL out out
ADET0033 SCELLEMENTS DES BAGUES ROULEMENTS ROTULES ASA AC7135 & AC7135/3
ADET0034 REALISATION DE VIS ET D AXES FILETES DANS NOS ATELIERS ASA AC7135 & AC7135/1
ADET0035 MATERIAUX EQUIVALENTS POUR BOULONNERIE out out
ADET0036 CARACTERISATION DE LA TEINTE DE FINITION BLANCHE CP AC7108
ADET0037 ROTULES STANDARDS AUTO LUBRIFIEES out out
ADET0038 LUSTRAGES DES PEINTURES EXTERIEURES AVION CP AC7108 & AC7108/1
ADET0039 SECHAGE ACCELERE DES PEINTURES CP AC7108 & AC7108/1
ADET0040 RETOUCHES DE PROTECTION ANTI-CORROSION INTERIEUR AVION CP AC7108
ADET0044 MARQUAGE DES SURFACES EXTERIEURES AVION out out
ADET0045 A-S7G06-T6 HAUTE QUALITE EBAUCHES COULEES EN SABLE ET BASSE PRESSION out out
ADET0047 SPECIFICATION DE PROCEDE - PROTECTION POUR ELEMENTS DE FIXATION EN ACIER ALLIE EN REMPLACEMENT out out
ADET0049 DE CADMIUM
USINAGE CHIMIQUE DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/5
ADET0051 IVD ALUMINIUM DES ACIERS INOXYDABLES ET ALLIAGES DE TITANE out out
ADET0052 GRENAILLAGE DE PRECONTRAINTE DES METAUX DURS (REPLACED BY AIPS02-02-004) SE AC7117 & AC7117/3 & AC7117/5
ADET0053 HARMONISATION DES ETATS DE SURFACES DES ELEMENTS EN COMPOSITES PEINTS HORS AMENAGEMENT CP AC7108 & AC7108/1
ADET0054 COMMERCIAL
SPECIFICATION TECHNIQUE D APPROVISIONNEMENT BIELLES A CORPS CYLINDRIQUE EN FIBRES DE CARBONE out out
ADET0055 FORMAGE ET CONFORMAGE PAR GRENAILLAGE DES MATERIAUX METALLIQUES SE - Not mandated AC7117 & AC7117/3
ADET0056 LASER CUTTING OF HARD METALLIC MATERIALS NM AC7116 & AC7116/4
ADET0057 CINTRAGE A CHAUD DES TUBES EN TITANE out out
ADET0058 RESSORTS EN ACIER AU CARBONE ACIER INOXYDABLE ET BRONZE AU BERYLIUM out out
ADET0059 CONTROLE APRES POSE DES BOULONS DES FIXATIONS PERMANENTS ET DEMONTABLES ASA AC7135 & AC7135/1
ADET0060 METALLISATION D ELEMENTS COMPOSITES PAR DEPOTS METALLIQUES COMP AC7118 MB
ADET0061 THERMOFORMAGE DES THERMOPLASTIQUES out out
ADET0062 VIS A FILETAGE COURT A EMPREINTE EN CREUX COTE FILETAGE out out
ADET0063 ECROUS A GORGE DE RUPTURE CALIBREE POUR VIS A FILETAGE COURT A EMPREINTE EN CREUX COTE out out
ADET0064 FILETAGE
FORMAGE SUPERPLASTIQUE DES ALLIAGES D ALUMINIUM out out
ADET0065 FIXATIONS UTILISABLES EN ALTERNATIVE DANS LE CAS DE POSE AUTOMATIQUE OU ROBOTISEE out out
ADET0066 PREPARATION DE SURFACE EXTERIEURE AVANT PEINTURE FINALE CP AC7108
ADET0067 CHARACTERISATION DE LA TEINTE DE FINITION GRIS BAC 707 CP AC7108
ADET0070 TRAITEMENT DE SURFACE ET COLLAGE METAL-METAL STRUCTURAL DES PIECES EN 2204 ET 2024 PLAQUE COMP AC7118 MB
ADET0071 PEINTURE DES PIECES ELEMENTAIRES METALLIQUES CP AC7108 & AC7108/1
ADET0072 OXYDATION ANODIQUE CHROMIQUE DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/8
ADET0073 CADMIAGE ELECTROLYTIQUE DES ACIERS NON INOXYDABLES CP AC7108 & AC7108/9
ADET0074 SOUDAGE GENERALITES ( TOUS MATERIAUX) WELD AC7110 & AC7110/5
ADET0075 REVETEMENT ANTI-USURE ( TYPE CARBURE DE TUNGSTENE ) POUR ACIERS, ALLIAGES D ALUMINIUM ET ALLIAGES out out
ADET0076 DE TITANE
SUREPAISSEURS D APPROVISIONNEMENT POUR TOLES EN ALLIAGES D ALUMINIUM out out
ADET0077 MONTAGE DES BOULONS CYLINDRIQUES PERMANENTS AVEC INTERFERENCE ASA AC7135 & AC7135/1
ADET0078 RIVETAGES STRUCTURAUX ASA AC7135 & AC7135/1
ADET0079 TRAITMENT PAR CHROMATATION DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/11
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 7
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
ADET0080 FLAP PEENING SE AC7117 & AC7117/4
ADET0081 PHOSPHATATION DES ACIERS NON INOXYDABLES ( R<1450 MPA ) CP AC7108 & AC7108/11
ADET0082 APPLICATION DES MASTICS ASA AC7135 & AC7135/4
ADET0083 ARASAGE DES FIXATIONS ASA AC7135
ADET0084 OXYDATION ANODIQUE SULFURIQUE DU TITANE ET DE SES ALLIAGES ( SAUF FIXATIONS ) CP AC7108 & AC7108/8
ADET0085 MONTAGE DES BOULONS DE TRACTION ASA AC7135
ADET0086 MARQUAGE A L ENCRE DES PIECES ELEMENTAIRES out out
ADET0087 EPROUVETTES ET METHODOLOGIE D ESSAIS UTILISEES POUR LA QUALIFICATION DES MATERIAUX METALLIQUES out out
ADET0088 QUALIFICATION DU 2024 T 351 SOUS FORME DE TOLES EPAISSES out out
ADET0089 QUALIFICATION DU 2024 T3 SOUS FORME DE TOLES MINCES, PLAQUEES OU NON PLAQUEES, A STRUCTURE out out
ADET0090 FIBREE
QUALIFICATION DE 2024 T3 SOUS FORME DE TOLES MINCES, PLAQUEES OU NON PLAQUEES A STRUCTURE out out
ADET0091 ENTIEREMENT
OXYDATION RECRISTALLISEE
ANODIQUE SULFURIQUE DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/8
ADET0092 PEINTURE DES PIECES ELEMENTAIRES EN COMPOSITE ( HORS AMENAGEMENT COMMERCIAL ) CP AC7108 & AC7108/1
ADET0093 TUYAUTERIE POUR CONDITIONNEMENT D AIR COMP AC7118
ADET0094 APPLICATION LOCALE AU TAMPON D OXYDATION ANODIQUE DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/13
ADET0095 ASSEMBLAGE AVEC INTERPOSITION DE RESINE ASA AC7135 & AC7135/1
ADET0096 STRUCTURE TYPE PLANCHER COMPOSITE CARBONE COMP AC7118 PAR
ADET0097 OXYDATION ANODIQUE DURE DES ALLIAGES D ALUMINIUM CORROYES CP AC7108 & AC7108/8
ADET0098 RILSANISATION DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/1
ADET0099 TRAITEMENT DE SURFACE ET COLLAGE DU TITANE ET DE SES ALLIAGES ( SUR EUX-MEMES OU SUR COMPOSITES COMP AC7118 MB
ADET0100 CARBONE
MISE ) A 180°C
EN CEUVRE DEAVEC FILM DE COLLE
VIS AUTOTARAUDEUSES out out
ADET0101 QUALIFICATION DU 7475 T7351 SOUS FORME DE TOLES EPAISSES out out
ADET0102 QUALIFICATION DU 7050 T7451 SOUS FORME DE TOLES EPAISSES out out
ADET0103 QUALIFICATION DU 2024 T3510 ET T3511 SOUS FORME DE PROFILES FILES out out
ADET0104 QUALIFICATION DU 7075 T6511 SOUS FORME DE PROFILES FILES out out
ADET0105 CONTROLE PAR ULTRASONS RENFORCE POUR EBAUCHES EN MATERIAUX METALLIQUES CORROYES NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
ADET0106 REPARATIONS DES DEFAUTS DE SURFACE SUR LES REVETEMENTS EXTERIEURS AVION EN ALLIAGES D out out
ADET0107 ALUMINIUM
QUALIFICATION DU 2124 T351 SOUS FORME DE TOLES EPAISSES out out
ADET0108 QUALIFICATION DU 7175 T7351 SOUS FORME DE TOLES EPAISSES out out
ADET0109 QUALIFICATION DU 7010 T651 SOUS FORME DE TOLES EPAISSES out out
ADET0110 QUALIFICATION DU 7010 ET 7150 T 6511 SOUS FORME DE PROFILES FILES out out
ADET0111 QUALIFICATION DU 7075 PL T 6 SOUS FORME DE TOLES MINCES out out
ADET0112 QUALIFICATION DU 7475 PL T 761 SOUS FORME DE TOLES MINCES out out
ADET0113 ETAGERES COMPOSITES POUR MEUBLES ELECTRIQUES COMP AC7118 PAR
ADET0114 PROCEDES DE METALLISATION ASA AC7135 & AC7135/2
ADET0115 PEINTURE EXTERIEURE AU STADE FINAL D ASSEMBLAGE AVION CP AC7108 & AC7108/1
ADET0116 DECAPAGE DE PEINTURE DES PIECES ELEMENTAIRES PAR PROJECTION DE PARTICULES PLASTIQUES ET REMISE CP AC7108 & AC7108/14
ADET0117 EN PEINTUREDES ELEMENTS D EXTREMITE
SERTISSAGE out out
ADET0118 COUPLES DE SERRAGE SUR MATERIALS ELECTRIQUES out out
ADET0119 RIVETS EN 2017 POSABLES SUR ETAT DE LIVRAISON out out
ADET0120 REALISATION D ELEMENTS COMPOSITES MONOLITHIQUES EN PREIMPREGNES CARBONE RESINE EPOXY 180°C COMP AC7118 PAR
ADET0121 PEINTURE EXTERIEURE ANTI-EROSION DES PIECES EN COMPOSITE CP AC7108 & AC7108/1
ADET0122 DENUDAGE DES CABLES ELECTRIQUES out out
ADET0123 MARQUAGE DES CABLES ELECTRIQUES out out
ADET0124 EXIGENCES TECHNIQUES SUR CABLES FIBRE OPTIQUE out out
ADET0125 INSERTION ET EXTRACTION DES CONTACTS AMOVIBLES DANS LES ELEMENTS DE CONNEXION ELECTRIQUE out out
ADET0126 TECHNOLOGIE
RETOUCHE PARDEVERROUILLABLES
OXYDATION ANODIQUEPARAU
L ARRIERE
TAMPON TYPE 2 ( 12 MICRONS ) DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/13
ADET0127 CORROYES
NITRURATIONPROTEGES PARACIERS
IONIQUE DES O.A.S. FAIBLEMENT ALLIES HT AC7102 & AC7102/4
ADET0128 COLLAGE DE BAGUE TITANE AU NIVEAU DES EMBOUTS DE BIELLES COMPOSITE CARBONE out out
ADET0130 COLLAGE STRUCTURAL D ELEMENTS COMPOSITES MONOLITHIQUES ET/OU SANDWICH EN PREIMPREGNES COMP AC7118 PAR
ADET0132 CARBONE RESINE
SPECIFICATION EPOXY 180°C AVEC ADHESIF
D APPROVISIONNEMENT POUR LES ROTULES D ARTICULATION DU TRAIN AVANT DE L A330/340 out out
ADET0133 SPECIFICATION D APPROVISIONNEMENT POUR LES ROTULES D ARTICULATION DE L ATTERRISSEUR CENTRAL DE out out
ADET0134 L A330/340 DES FIXATIONS AVEUGLES
MONTAGE ASA AC7135 & AC7135/1
ADET0135 FOURNITURE DE RIVETS PLEINS out out
ADET0142 CONTAMINATION HUILE IDG out out
ADET0143 INSERTION ET EXTRACTION DES CONTACTS AMOVIBLES DANS LES ELEMENTS DE CONNEXION ELECTRIQUE out out
ADET0144 TECHNOLOGIE DEVERROUILLABLES
QUALIFICATION DU 7075 T 73510 ET TPAR L AVANT
73511 SOUS FORME DE PROFILES FILES out out
ADET0145 QUALIFICATION DU 7075 T 76510 ET T 76511 SOUS FORME DE PROFILES FILES out out
ADET0146 REGLAGE DES PORTES PASSAGERS SUR TOUS AIRBUS out out
ADET0147 NICKELAGE + CADMIAGE AU TAMPON DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/13
ADET0148 MISE EN CEUVRE DE PREIMPEGNES A BASE DE RESINE PHENOLIQUE RENFORCEE DE FIBRES LONGUES COMP AC7118
ADET0149 PEINTURES SUR COMPOSITES REALISES A BASE DE RESINE PHENOLIQUE RENFORCEE DE FIBRES LONGUES CP AC7108 & AC7108/1
ADET0150 REALISATION D ELEMENTS COMPOSITES EN PREIMPREGNES TISSU HYBRIDE VERRE CARBONE OU TISSU COMP AC7118 PAR
ADET0151 ARAMIDE RESINE
DENSIFICATION DEEPOXY 120°C
NID D ABEILLES NON METALLIQUE POUR APPLICATION STRUCTURALE COMP AC7118 PAR + CP
ADET0152 EDGING BY WIRE ELECTRO-EROSION OF HARD METALLIC MATERIALS NM AC7116 & AC7116/3
ADET0153 IDENTIFICATION DES CABLES ET HARNAIS ELECTRIQUES out out
ADET0154 MARQUAGE ELECTROLYTIQUE out out
ADET0155 MARQUAGE AU VIBROGRAVEUR out out
ADET0156 IMMOBILISATION EN TRANSLATION DES AXES DES CHARNIERES MS 20001 out out
ADET0157 REPRISE DE BLINDAGE SUR LES CABLES ELECTRIQUES out out
ADET0158 SPECIFICATION D APPROVISIONNEMENT POUR LES ROULEMENTS ETANCHES A ROULEAUX DOUBLE RANGEE DES out out
ADET0159 AILERONS INTERNES
INSTALLATION ET EXTERNES
DES PLAQUES DE L A340 SEUIL DE PORTE
DE PROTECTION out out
ADET0160 USINAGE CHIMIQUE DES ALLIAGES DE TITANE CP AC7108 & AC7108/5
ADET0161 FORMAGE SUPERPLASTIQUE DES ALLIAGES DE TITANE out out
ADET0162 MARQUAGE A LA FRAPPE CONTROLEE out out
ADET0163 ARGENTURE ELECTROLYTIQUE DES ACIERS INOXYDABLES ET ALLIAGES DE CUIVRE CP AC7108 & AC7108/9
ADET0164 FINITION DES PIECES EN METAUX DURS ( EBAVURAGE, CASSAGE D ANGLE OU RYONNAGE ) out out
ADET0165 REGLES DE FABRICATION DES HARNAIS out out
ADET0166 CONTROLE DE FORME DE TOLES MINCES USINEES out out
ADET0167 CADMIAGE AU TAMPON DES ACIERS CP AC7108 & AC7108/13
ADET0168 FORMAGE A CHAUD D ELEMENTS COMPOSITES EN PREIMPREGNES CARBONE RESINE EPOXY 180°C COMP AC7118 PAR
ADET0169 REGLES D INSTALLATION DES HARNAIS ELECTRIQUES SUR AVION out out
ADET0170 PROCEDE D ESSAIS DE CONDUCTIBILITE ELECTRIQUE ET DE FOUDRE SUR ASSEMBLAGES PAR FIAXTIONS out out
ADET0171 MARKING WITH C02 LASER OF HARD METALLIC MATERIALS NM - Not mandated AC7116 & AC7116/5
ADET0172 MARGES DE TOLERANCE SUR INSTALLATION ELECTRIQUE out out
ADET0173 EMMANCHEMENT DES BAGUES MONTEES SERREES ASA AC7135 & AC7135/3
ADET0174 MISE EN CEUVRE DE COMPOSITES A MATRICE EPOXYDE PAR PROCEDE RTM ( RESIN TRANSFER MOULDING ) COMP AC7118 LRP + CP
ADET0175 RETOUCHE DE PROTECTION PAR CHROMATATION SUR ALLIAGES D ALUMINIUM CP AC7108 & AC7108/11
ADET0177 PERCAGE, ALESAGE, FRAISURAGE, DES COMPOSITES CARBONE OU DES EMPILAGES COMPOSITES CARBONE & COMP AC7118 PAR
ADET0178 METALLIQUES
PERCAGE, ALESAGE, FRAISURAGE DES COMPOSITES OU DES EMPILAGES AVEC COMPOSITES ARAMID, VERRE, COMP AC7118 PAR
ADET0180 HYBRIDES VERRE-CARBONE
PROTECTION DES ACIERS PAR PROJECTION A CHAUD D ALUMINIUM out out
ADET0181 MARQUAGE LASER SUR TUYAUTERIE RIGIDE HYDRAULIQUE out out
ADET0183 REPARATIONS SUR TUBE DE BATI ATR SUR AVION EN COMPAGNIE out out
ADET0184 MILLING AND EDGING FOR CARBON COMPOSITES NM - Not mandated AC7116 & AC7116/7
ADET0185 FRAISAGE ET DETOURAGE DES COMPOSITES ARAMIDE, VERRE ET HYBRIDES VERRE-CARBONE COMP AC7118 PAR
ADET0187 MONTAGE HUMIDE DE FIXATIONS ASA AC7135 & AC7135/4
ADET0188 MONTAGE DES BOULONS CONIQUES TAPERLOK ASA AC7135 & AC7135/1
ADET0190 CRITERES DE SUIVI DU FLUIDE HYDRAULIQUE NSA307110 SUR AVION AVANT LIVRAISON out out
ADET0191 MONTAGE DES ROULEMENTS, ROTULES ET BAGUES PAR SERTISSAGE ASA AC7135 & AC7135/3
ADET0193 TESTS ELECTRIQUES ET OPTIQUES DES CABLAGES AVIONS ( HORS ESSAIS FONCTIONNELS ) out out
ADET0194 PROTECTION PAR NITRURE DE TITANE (TIN) DES ALLIAGES DE NICKEL, ACIERS INOXYDABLES ET ALLIAGES DE out out
ADET0196 TITANE
FORMAGE ET CONFORMAGE PAR GALETAGE DES ALLIAGES D ALUMINIUM out out
ADET0201 INSTALLATION DE BAGUES DANS DES ALESAGE DE CHAPES METALLIQUES PAR PROCEDE D EXPANSION BUSHLOC ASA AC7135 & AC7135/3
ADET0202 SOUDAGE PAR RESISTANCE PAR POINTS OU A LA MOLETTE WELD AC7110 & AC7110/4
ADET0203 SODAGE TIG ( TUNGSTEN INERT GAS ) WELD AC7110 & AC7110/5
ADET0204 SOUDAGE PAR FAISCEAUX LASER SUR METAUX DURS WELD AC7110 & AC7110/6
ADET0205 SOUDAGE PAR FAISCEAU D ELECTRONS DU TITANE ET DE SES ALLIAGES WELD AC7110 & AC7110/3
ADET0207 PROCEDES MANUELS DE SOUDAGE ARC AVEC ELECTRODE ENROBEE ET OXYACETYLENIQUE, DE BRASAGE ET DE WELD AC7110 & AC7110/1
ADET0208 SOUDOBRASAGE
SOUDAGE PAR FUSION CONE ARRIERE T 19 A330/340 WELD AC7110 & AC7110/5
ADET0209 SOUDAGE PAR RESISTANCE CONE ARRIERE T 19 A330/340 WELD AC7110 & AC7110/4
ADET0211 MISE EN OEUVRE DE COMPOSITES A MATRICE PHENOLIQUE PAR LE PROCEDE RTM ( RESIN TRANSFER MOULDING COMP AC7118 LRP
ADET0212 )REPERTOIRE DES DEFAUTS TYPES D USINAGE DE COMPOSITES POLYMERISES COMP AC7118 PAR
ADET0213 PLIAGE DE COMPOSITES MONOLITHIQUES A BASE DE RESINE THERMOPLASTIQUE POUR AMENAGEMENT out out
ADET0214 COMMERCIAL
MISE EN OEVRE DE PLAQUES THERMOPLASTIQUES A FIBRES CONTINUES POUR STRUCTURE MONOLITHIQUE out out
ADET0215 POSE DES RUBANS D IDENTIFICATION SUR TUYAUTERIES out out
ADET0216 PILAGE DE COMPOSITES SANDWICH A BASE DE RESINE THERMODURCISSABLE POUR AMENAGEMENT out out
COMMERCIAL
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 8
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
ADET0218 DECAPAGE CHIMIQUE DES PEINTURES EXTERIEURES AVION ET REMISE EN PEINTURE CP AC7108 & AC7108/14
ADET0220 MISE EN OEUVRE DE THERMOPLASTIQUES INJECTS out out
ADET0221 FABRICATION DE PANNEAUX SANDWICH THERMOPLASTIQUE POUR AMENAGEMENT COMMERCIAL out out
ADET0223 FINAL ROUTING OF ALUMINIUM ALLOYS SHEETS. NM - Not mandated AC7116 & AC7116/7
ADET0224 CRITERIES D ACCEPTATION DES DEFAUTS PIECES DE FONDERIE DETECTES PAR RESSUAGE out out
ADET0227 PROCEDE D ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES PRODUITS MATRICE OU FORGES out out
ADET0228 PROCEDE D ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES PIECES ISSUES DE DEMI- out out
ADET0229 PRODUITS
CNITRAGE LAMINES,
DE TUBESFILES OU ETIRES
HYDRAULIQUES out out
ADET0231 FORMAGE DES COLLETS PAR PROCEDE ECKOLD out out
ADET0233 APPLICATION DU REVETEMENT BARRIERE D ETANCHEITE AUX VAPEURS DE CARBURANT out out
ADET0234 DECAPAGE CHIMIQUE DES PEINTURES SUR PIECES ELEMENTAIRES EN ALLIAGES D ALUMINIUM CP AC7108 & AC7108/14
ADET0235 PROCEDURES DE NETTOYAGE DES ELEMENTS ELECTRIQUES NORMALISES out out
ADET0236 DENSIFICATION DE NID D ABEILLE POUR APPLICATIONS AMENAGEMENT COMMERCIAL COMP AC7118 CP
ADET0237 FORMAGE ET CONFORMAGE PAR FLEXION 3 POINTS DES MATERIAUX METALLIQUES out out
ADET0239 FORMAGE A CHAUD DU TITANE ET DE SES ALLIAGES out out
ADET0240 PEINTURE ANTISTATIQUE DES PIECES ELEMENTAIRES EN COMPOSITE CP AC7108 & AC7108/1
ADET0241 FORMAGE PAR ETIRAGE DU TISSU METALLIQUE out out
ADET0242 BOBINAGE DE FIL CARBONE IMPREGNE SUR WIRE-MESH POUR STRUCTURE ACOUSTIQUE out out
ADET0243 COLLAGE D UN REVETEMENT RESISTIF SUR NID D ABEILLE AVEC ADHESIF RETICULE COMP AC7118 PAR
ADET0244 MISE EN OEUVRE DE L ANCRAGE DU NID D ABEILLE NON METALLIQUE COMP AC7118 PAR + CP
ADET0245 MARQUAGE PAR MICRO USINAGE out out
ADET0247 MISE EN OEUVRE DES FILMS INTUMESCENTS SUR STRUCTURE SANDWICH ( CARBONE RESINE EPOXY 180°C & NID COMP AC7118 PAR + CP
ADET0251 D ABEILLES
USINAGE 9 FRAISAGE DES PIECES EN ALLIAGE D ALUMINIUM
PAR out out
ADET0252 ASSEMBLAGE STRUCTURAL DE PREFORMES FIBREUSES COMP AC7118 LRP
ADET0253 REALISATION D ELEMENTS COMPOSITES SANDWICH NID D ABEILLES NON METALLIQUE & PREIMPREGNES COMP AC7118 PAR + CP
ADET0255 CARBONE RESINEDE
CONSOLIDATION EPOXY 180°C
PLAQUES AVEC ADHESIF EPOXY
THERMOPLASTIQUES out out
ADET0256 SOUDAGE PAR FAISCEAUX LASER SUR ALLIAGE D ALUMINIUM WELD AC7110 & AC7110/6
ADET0261 REALISATION D ELEMENTS COMPOSITES SANDWICH AME EN MOUSSE & PEAUX EN PREIMPREGNES CARBONE COMP AC7118 PAR + CP
ADET0262 RESIN EPOXYPAR
REPARATION 180°C
SOUDAGE TIG MANUEL SUR PIECES DE TOLERIE WELD AC7110 & AC7110/5
ADET0263 RECTIFICATION DES MATERIAUX METALLIQUES DURS out out
ADET0264 CONSTITUTION DE BANDES SANDWICH ACOUSTIQUES POUR ENTREE D'AIR COMP AC7118 PAR
ADET0265 ASSEMBLAGE DE BANDES SANDWICH ACOUSTIQUES POUR ENTREE D'AIR out out
ADET0268 PASSIVATION DES ACIERS INOXYDABLES MARTENSITIQUES ET AUSTENITIQUES CP AC7108 & AC7108/12
ADET0269 MARQUAGE A LA FRAPPE CONTROLLE out out
AIPI01-01-004 INSTALLATION OF SOLID RIVETS ASA AC7135
AIPI01-02-003 PREPARATION OF HOLES IN METALLIC MATERIALS FOR FASTENING ASA AC7135 & AC7135/1
AIPI01-02-005 PREPARARTION OF HOLES IN FIBRE REINFORCED PLASTIC (FRP) AND MIXED (FRP/METAL) ASSEMBLIES FOR ASA or COMP AC7135 or AC7118 PAR
AIPI01-02-006 FASTENING
POSE DE FIXATIONS LOCKBOLT DE TYPE PULL ASA AC7135 & AC7135/1
AIPI01-02-008 TIGHTENING TORQUES FOR STRUCTURAL FASTENERS ASA AC7135 & AC7135/1
AIPI01-02-013 INSTALLATION OF BLIND BOLTS PULL-TYPE ASA AC7135 & AC7135/1
AIPI01-02-014 INSTALLATION OF COLD EXPANDED RETAINERS ASA AC7135 & AC7135/1
AIPI01-02-015 INSTALLATION OF BLIND BOLTS THREADED TYPE ASA AC7135 & AC7135/1
AIPI01-02-016 INSTALLATION OF RIVETLESS NUT PLATES ASA AC7135 & AC7135/1
AIPI01-02-017 GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS ASA AC7135
AIPI01-02-019 INSTALLATION OF BUSHES SHRINK AND PRESS FIT ASA AC7135 & AC7135/3
AIPI01-02-022 INSTALLING THREADED CYLINDRICAL FASTENERS ASA AC7135 & AC7135/1
AIPI01-02-026 INSTALLATION OF COLD EXPANDED MODULAR RETAINERS ASA AC7135
AIPI01-02-027 INSTALLATION OF BLIND RIVET NUTS - KOMMT NOCH MAL NACH FREIGABE ASA AC7135 & AC7135/1
AIPI01-02-028 INSTALLATION PRE-LOAD CONTROLLED OF TENSION BOLTS ASA AC7135 & AC7135/1
AIPI01-03-001 INSTALLATION OF COLD EXPANDED BUSHES INTO NON METALLIC MATERIALS ASA AC7135 & AC7135/1
AIPI01-03-002 MANUAL FASTENING OF 2- OR 4- START QUICK RELEASE FASTERNERS WITH ODER WITHOUT ACRES SLEEVES ASA AC7135 & AC7135/1
AIPI01-03-003 INSTALLATION OF INSERTS IN NON-METALLIC ASA or COMP (AC7135 & AC7135/1) or AC7118 PAR
AIPI01-03-004 INSTALLATION OF HELICAL THREADED INSERTS ASA AC7135 & AC7135/1
AIPI01-03-005 INSTALLATION OF METALLIC INSERTS (ACRES SLEEVES) ASA or COMP (AC7135 & AC7135/1) or AC7118 PAR
AIPI01-03-007 AIRBUS PROCESS INSTRUCTION INSTALLATION OF SEALED NUT CAPS ASA AC7135 & AC7135/4
AIPI01-03-008 INSTALLATION OF PARALLEL SLEEVED FASTENERS ASA AC7135 & AC7135/1
AIPI01-04-004 RESISTANCE WELDING (SPOT AND SEAM WELDING) WELD AC7110 & AC7110/4
AIPI01-04-008 TUNGSTEN INERT GAS WELDING WELD AC7110 & AC7110/5
AIPI01-04-011 ELECTRON BEAM WELDING OF HARD METALS WELD AC7110 & AC7110/3
AIPI01-04-013 LASER BEAM WELDING OF HARD METAL WELD AC7110 & AC7110/6
AIPI01-04-016 LASER BEAM WELDING OF ALUMINIUM ALLOYS WELD AC7110 & AC7110/6
AIPI02-01-002 SULPHURIC ACID ANODISING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/8
AIPI02-01-003 TARTARIC SULPHURIC ANODIZING OF ALUMINIUM ALLOYS (TSA) CP AC7108 & AC7108/8
AIPI02-01-004 ANODIZING OF TITANIUM AND ITS ALLOYS CP AC7108 & AC7108/8
AIPI02-01-005 HARD ANODIZING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/8
AIPI02-01-006 PHOSPHORIC SULPHURIC ANODISING (PSA) OF ALUMINIUM ALLOYS PRIOR TO STRUCTURAL BONDING CP AC7108 & AC7108/3
AIPI02-02-002 DRY BLASTING CP or SE AC7108 or AC7117
AIPI02-02-003 WET BLASTING CP AC7108
AIPI02-02-004 SHOT PEENING FOR FATIGUE ENHANCEMENT OF METAL PARTS SE AC7117 & AC7117/1 & AC7117/2 & AC7117/5
AIPI02-02-005 COLD EXPANSION IN METALLIC MATERIALS SPLIT SLEEVE PROCESS ASA AC7135
AIPI02-02-006 COLD EXPANSION IN METALLICS - SPLIT MANDREL PROCESS ASA AC7135
AIPI02-02-008 DECORATIVE BRUSHING out out
AIPI02-02-010 INSTALLATION OF BUSHES BY COLD EXPANSION PROCESS IN METALLIC MATERIALS ASA AC7135 & AC7135/3
AIPI02-03-001 APPLICATION OF THERMAL SPRAY COATINGS WC-CO AND WC-CO-CR out out
AIPI02-03-003 PHYSICAL VAPOR DEPOSITION OF TITANIUM NITRIDE FOR COATING OF NICKEL ALLOYS, STAINLESS STEELS AND out out
AIPI02-03-004 TITANIUM ALLOYS
DEPOSITION OF ALUMINIUM BY THE THERMAL SPRAY PROCESS out out
AIPI02-03-005 DEPOSITION OF ZINC MATERIALS BY TEH THERMAL SPRAY PROCESS out out
AIPI02-03-006 ALUMINIUM COATING BY ION VAPOUR DEPOSITION (IVD) out out
AIPI02-03-007 APPLICATION OF THERMAL SPRAY COBALT CHROMIUM MOLYBDENUM COATINGS out out
AIPI02-03-008 COPPER ALUMINIUM IRON COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY FLAME OR WIRE THERMAL out out
AIPI02-03-009 SPRAYING
COPPER NICKEL INDIUM ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY PLASMA THERMAL out out
AIPI02-04-001 SPRAYING
APPLICATION OF CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUNDS CP AC7108
AIPI02-04-006 ELECTROLYTIC ZINC-NICKEL PLATING CP AC7108 & AC7108/9
AIPI02-04-007 PHYSICAL VAPOUR DEPOSITION FOR WC-C: H COATING out out
AIPI02-04-008 ELECTROLESS (CHEMICAL) NICKEL - PHOSPHORUS PLATING CP AC7108 & AC7108/10
AIPI02-04-009 APPLICATION OF CORROSION INHIBITING SOLID FILM LUBRICANT CP AC7108 & AC7108/1
AIPI02-04-011 ELECTROLESS (CHEMICAL) NICKEL PHOSPHORUS - PTFE DUPLEX COATING out out
AIPI02-04-013 NON CHROMIUM (VI) PASSIVATION FOR CADMIUM PLATING CP AC7108 & AC7108/12
AIPI02-05-001 CHEMICAL CONVERSION COATING CP AC7108 & AC7108/11
AIPI02-05-003 PASSIVATION OF CORROSION RESISTANT STEEL CP AC7108 & AC7108/12
AIPI02-05-004 PHOSPHATING OF STEEL CP AC7108 & AC7108/11
AIPI02-05-005 PASSIVATION OF CORROSION RESISTANT STEEL CP AC7108 & AC7108/12
AIPI03-01-001 ROLLER SWAGING FOR NON HYDRAULICS FITTING & COUPLING out out
AIPI03-01-003 ASSEMBLY AND INSTALLATION OF JANITROL COUPLING out out
AIPI03-01-010 MANUFACTURING OF PIPES out out
AIPI03-01-011 INTERNAL ROLLER SWAGED PIPE COUPLINGS out out
AIPI03-01-012 EXTERNAL SWAGING OF FITTINGS ON 5080 PSI TITANIUM TUBES out out
AIPI03-01-013 EXTERNAL SWAGING OF SLEEVES ON 5 080 PSI TITANIUM TUBES out out
AIPI03-01-015 BLANKING OF PIPES, HOSES AND COMPONENTS out out
AIPI03-02-007 REMOVAL OF DECORATIVE SHEET MATERIALS FOR FURNISHINGS AND COMPONENTS USED IN AIRCRAFT out out
AIPI03-02-008 INTERIORS
THERMOFORMING OF THERMOPLASTIC SHEETS out out
AIPI03-02-010 THE MANUFACTURE OF THERMOPLASTIC MATERIAL PARTS BY THE INJECTION MOLDING PROCESS out out
AIPI03-02-018 MANUFACTURE OF STRUCTURAL SANDWICH PARTS WITH THERMOSETTING FIBER REINFORCED SKINS COMP AC7118 PAR + CP
AIPI03-02-019 MANUFACTURE OF MONOLITHIC PARTS WITH THERMOSET PREPREG MATERIALS COMP AC7118 PAR
AIPI03-02-020 MANUFACTURING OF MONOLITHIC PARTS WITH THERMOPLASTIC MATERIAL out out
AIPI03-02-022 MANUFACTURE OF MONOLITHIC AND SANDWICH STRUCTURAL COMPONENTS BY IMPREGNATION OF DRY COMP AC7118 LRP + CP
AIPI03-02-023 REINFORCEMENT MATERIALS
MANUFACTURING WITH
OF ACOUSTIC THERMOSET
SANDWICH RESIN
STRIPS out out
AIPI03-02-025 ASSEMBLY OF ACOUSTIC SANDWICH STRIPS out out
AIPI03-02-028 WINDING OF IMPREGNATED CARBON FIBRE FOR ACOUSTIC STRUCTURES COMP AC7118
AIPI03-03-001 REWORK OF SCRATCHES IN ALUMINIUM AND ALUMINIUM ALLOYS ON EXTERNAL SURFACES ASA AC7135
AIPI03-03-002 DIMPLING FOR COUNTERSUNK HEAD FASTENERS ASA AC7135
AIPI03-03-005 MANUFACTURING OF FLARES AND BEADS ON RIGID PIPES out out
AIPI03-03-006 WATER JET CUTTING NM - Not mandated AC7116 & AC7116/7
AIPI03-03-009 INSTALLATION OF AXIAL-SWAGED FITTINGS FOR OXYGEN SYSTEM out out
AIPI03-03-010 APPLICATION OF TEXTILE FLOOR CORVERINGS out out
AIPI03-03-012 INSTALLATION OF BEARINGS, SPHERICAL BEARINGS AND BUSHES BY SWAGING ASA AC7135 & AC7135/3
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 9
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPI03-03-013 EXTERNAL SWAGED PIPE SOCKETS out out
AIPI03-03-014 COLD BONDING OF BUSHES-BALL-BEARINGS-SPHERICAL BEARINGS ASA AC7135 & AC7135/3
AIPI03-06-001 SCUFF PLATE AND ANTI-CHAFING PLATE INSTALLATION out out
AIPI03-06-002 LOCKING USING TAB WASHERS ASA AC7135 & AC7135/1
AIPI03-06-003 LOCKING BY WIRE ASA AC7135 & AC7135/1
AIPI03-06-004 LOCKING USING ANAEROBIC MATERIALS ASA AC7135 & AC7135/1
AIPI03-06-006 INTERNAL EXPANDER SWAGED PIPE COUPLINGS out out
AIPI03-06-007 EXTERNAL SWAGED TUBE FITTINGS out out
AIPI03-06-008 INSTALLATION OF RIGID HYDRAULIC PIPES AND FLEXIBLE HOSES out out
AIPI03-06-009 CALE D¿INTERPOSITION POUR L¿ASSEMBLAGE out out
AIPI03-06-010 INSTALLATION OF OXYGEN PIPES out out
AIPI03-06-011 INSTALLATION OF FUEL PIPE out out
AIPI03-06-014 FREINAGE PAR GOUPILLE FENDUE out out
AIPI03-06-015 TORQUE TIGHTENING OF A380 AND A350 HYDRAULIC CONNECTIONS out out
AIPI03-06-016 INTERNAL ROLLER SWAGED PIPE COUPLINGS out out
AIPI03-06-018 HOT GAS WELDING OF NON-TEXTILE FLOOR COVERINGS MADE OF POLYVINYL CHLORIDE out out
AIPI03-06-019 APPLICATION OF NON-TEXTILE FLOOR COVERINGS out out
AIPI03-07-002 MACHINING OF FIBRE REINFORCED PLASTIC (FRP) COMPONENTS COMP AC7118 PAR
AIPI03-07-004 PRODUCTION, INSTALLATION AND REWORK OF INSULATION BLANKETS out out
AIPI03-07-019 FORMING OF THERMOSET PREPREG MATERIALS COMP AC7118 PAR
AIPI03-07-021 PREPARATION OF DRY FIBER PREFORM FOR INFUSION AND INJECTION TECHNIQUES COMP AC7118 LRP
AIPI03-07-023 MANUFACTURE OF SANDWICH PARTS WITH THERMOSETTING FIBRE REINFORCED SKINS FOR INTERIOR COMP AC7118 PAR
AIPI03-07-024 APPLICATION OF FIBRE REINFORCED MONOLITHIC INTERIOR PARTS WITH THERMOSETTING PREPREG
MANUFACTURE COMP AC7118 PAR
AIPI03-07-025 MATERIAL
FOLDING OF COMPOSITES LOCATED INSIDE THE PRESSURIZED FUSELAGE (INTERIOR APPLICATION) out out
AIPI03-07-026 FILLING AND SPLICING OF SANDWICH PANEL HONEYCOMB CORES FOR INTERIOR PARTS COMP AC7118 CP
AIPI03-07-031 JOINING OF BINDERED DRY FIBRE PLIES AND PREFORMS BY ULTRASONIC WELDING out out
AIPI03-07-032 ULTRASONIC CUTTING OF FIBRE REINFORCED THERMOPLASTIC PARTS COMP AC7118
AIPI03-08-003 REWORK OF STRUCTURES MANUFACTURED FROM COMPOSITE MATERIALS (LAMINATES AND SANDWICH) COMP AC7118
AIPI03-09-001 LASER CUTTING OF STEEL, TITANIUM AND NICKEL ALLOYS NM AC7116 & AC7116/4
AIPI03-09-002 LASER CUTTING OF ALUMINIUM AND ALUMINIUM ALLOYS NM AC7116 & AC7116/4
AIPI03-09-003 SHEAR-CUTTING OF METALLIC SHEETS AND SECTIONS out out
AIPI03-09-005 ELECTRICAL DISCHARGE MACHINING OF HARD METALS NM AC7116 & AC7116/3
AIPI03-10-001 RETIFICATION OF METALLIC MATERIALS BY SHOT PEENING SE - Not mandated AC7117 & AC7117/3
AIPI03-10-002 RECTIFICATION OF METALLIC MATERIALS BY ROLL FORMING out out
AIPI03-10-003 RECTIFICATION OF METALLIC MATERIALS BY 3 POINT BENDING out out
AIPI03-10-004 AGE FORMING OF ALUMINIUM ALLOYS out out
AIPI03-10-005 FORMING OF ALUMINIUM ALLOYS out out
AIPI03-10-006 FORMING OF JOGGLES IN ALUMINIUM ALLOYS out out
AIPI03-10-007 SUPERPLASTIC FORMING OF ALUMINIUM ALLOY out out
AIPI03-10-008 SUPERPLASTIC FORMING OF TITANIUM ALLOYS out out
AIPI03-10-011 HARD METAL FORMING out out
AIPI03-11-001 MACHINING METALS BY MECHANICAL ACTION out out
AIPI03-11-002 PRECISION GRINDING out out
AIPI03-11-003 DEBURRING AND MANUAL REWORK OF METALLIC COMPONENTS out out
AIPI04-01-001 HEAT TREATMENT OF ALUMINIUM ALLOYS PARTS HT AC7102 & AC7102/2
AIPI04-02-001 HEAT TREATMENT OF PARTS MANUFACTURED FROM TITANIUM AND TITANIUM ALLOYS HT AC7102
AIPI04-03-001 HEAT TREATMENT OF STEELS HT or CP AC7102 or AC7108
AIPI04-04-001 HEAT TREATMENT OF NICKEL ALLOYS PARTS HT AC7102
AIPI05-02-002 APPLICATION OF ANTI-STATIC PAINTS ON COMPOSITE PARTS CP AC7108 & AC7108/1
AIPI05-02-003 APPLICATION OF EXTERNAL PAINT SYSTEMS CP AC7108 & AC7108/1
AIPI05-02-006 APPLICATION OF DECORATIVE INTERIOR PAINT CP AC7108 & AC7108/1
AIPI05-02-007 REMOVAL OF PAINT FROM FURNISHING AND COMPONENTS USED IN AIRCARAFT INTERIORS out out
AIPI05-02-008 APPLICATION OF IN-MOULD COATING FOR DECORATIVE INTERIOR PARTS out out
AIPI05-02-009 APPLICATION OF STRUCTURAL PAINTS CP AC7108 & AC7108/1
AIPI05-02-010 APPLICATION OF DECORATIVE FILM COATING out out
AIPI05-02-011 REWORK OF PAINTS ON METALLIC AND NON-METALLIC STRUCTURAL PARTS CP AC7108 & AC7108/1
AIPI05-02-012 POWDER COATING OF METALLIC PARTS CP AC7108 & AC7108/1
AIPI05-02-013 APPLICATION OF ANTI-EROSION PAINTS CP AC7108 & AC7108/1
AIPI05-02-014 APPLICATION OF FUEL VAPOUR BARRIER COATING CP AC7108 & AC7108/1
AIPI05-02-015 APPLICATION OF ANTISLIP EMERGENCY & WALKWAY PAINT CP AC7108 & AC7108/1
AIPI05-02-016 APPLICATION OF DECORATIVE SHEET MATERIAL out out
AIPI05-02-017 APPLICATION OF CORROSION INHIBITING COATING ON EXTERNAL EROSION PRONE UNPAINTED ALUMINIUM CP AC7108 & AC7108/1
AIPI05-03-005 SURFACES
CHEMICAL STRIPPING OF AIRCRAFT EXTERNAL PAINT SYSTEM AND REPAINTING CP AC7108 & AC7108/14
AIPI05-03-006 COATING REMOVAL BY MEANS OF A LASER TECHNIQUE FOR PREPARATION OF ELECTRICAL BONDING out out
AIPI05-04-005 CONNECTIONS
APPLICATION OF GAP FILLER-EASY TO REMOVE out out
AIPI05-04-006 APPLICATION OF FILLER out out
AIPI05-04-007 APPLICATION OF FINE LAYERS out out
AIPI05-05-001 SEALING OF AIRCRAFT STRUCTURE ASA AC7135 & AC7135/4
AIPI05-05-003 SURFACE PROTECTION OF FASTENERS AND SEALANTS BY APPLICATION OF VARNISH ASA AC7135 & AC7135/4
AIPI05-05-004 WET INSTALLATION OF FASTENERS ASA AC7135 & AC7135/4
AIPI05-05-005 PROCESS FOR THE MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT ASA AC7135 & AC7135/4
AIPI05-05-006 APPLICATION DE PÂTE A JOINT NON DURCISSANTE ASA AC7135 & AC7135/4
AIPI05-05-007 APPLICATION METHODS FOR THE USE OF SEALANT IMPREGNATED FOAM ASA AC7135 & AC7135/4
AIPI05-05-008 APPLICATION OF LOW ADHESION SEALANT ASA AC7135 & AC7135/4
AIPI05-05-009 PRESERVATION OF CUT EDGES OF CARBON FIBRE COMPOSITE PARTS TO PREVENT GALVANIC CORROSION ON ASA AC7135
AIPI05-05-010 ATTACHED
USE METAL PARTS SEALANTS FOR INTERIOR APPLICATION
OF SILICONE-BASED ASA AC7135 & AC7135/4
AIPI05-06-001 APPLICATION OF DECORATIVE FILMS FOR AIRCRAFT EXTERIOR out out
AIPI05-07-001 APPLICATION OF FIRE PROTECTIVE COATINGS out out
AIPI06-01-003 SURFACE PREPARATION FOR THERMOSETTING PARTS BEFORE STRUCTURAL BONDING COMP AC7118
AIPI06-01-004 MECHANICAL SURFACE PREPARATION OF NON-STRUCTURAL ADHEREND PRIOR TO ADHESIVE BONDING out out
AIPI06-01-005 ETCHING OF POLYAMIDE ADHERENDS PRIOR TO ADHESIVE BONDING out out
AIPI06-01-006 PRIMING OF POLYAMIDE ADHEREND PRIOR TO ADHESIVE BONDING out out
AIPI06-01-007 ETCHING OF FLUOROPOLYMER ADHEREND PRIOR TO ADHESIVE BONDING out out
AIPI06-01-008 SURFACE PREPARATION OF ADHERENDS FOR SILICONE BASED ADHESIVES/SEALANTS ASA AC7135
AIPI06-02-002 NON STRUCTURAL ADHESIVE BONDING out out
AIPI06-02-005 MANUFACTURING OF METALLIC SANDWICH PARTS - BONDING PROCESS COMP AC7118 MB
AIPI06-02-006 STRUCTURAL BONDING OF THERMOSET AND THERMOPLASTIC MATRICES COMPOSITE PARTS COMP AC7118 PAR
AIPI06-02-007 BONDING METALL/METALL PARTS - STRUCTURAL BONDING PROCESS COMP AC7118 MB
AIPI06-02-008 BONDING OF ACOUSTIC SKIN ON HONEYCOMB WITH RETICULATED ADHESIVE out out
AIPI06-02-009 ADHESIVE TAPE BONDING out out
AIPI07-01-001 FABRICATION ET INSTALLATION DES HARNAIS out out
AIPI07-01-002 INSERTION ET EXTRACTION DES CONTACTS AMOVIBLES DANS LES SYSTEMES DE CONNEXION ELECTRIQUE out out
AIPI07-01-003 FRETTAGE DES CÂBLES AVEC COLLIERS NSA935401 OU FRETTES FICELLE NSA8420 out out
AIPI07-01-004 TIGHTENING PROCEDURE FOR ELECTRICAL EQUIPMENT out out
AIPI07-01-005 TERMINATION OF UNWIRED SHIELDED CABLES out out
AIPI07-01-006 ELECTRICAL BONDING ASA AC7135 & AC7135/2
AIPI07-01-007 INSTALLATION DES MANCHONS AUTO-SOUDEURS out out
AIPI07-01-009 INSTALLATION DE RACCORDS ARRIÈRE out out
AIPI07-01-013 FABRICATION DE HARNAIS SURTESSES out out
AIPI07-01-014 MANUFACTURING AND PRODUCTION ASSEMBLY INSTRUCTIONS FOR SHIELDED LIGHTWEIGHT CONDUITS out out
AIPI07-01-015 MODIFICATION ET RÉPARATION D'UN HARNAIS SURTRESSÉ out out
AIPI07-01-017 PROCÉDÉ D¿ASSEMBLAGE DES SUPPORTS COLLÉS out out
AIPI07-01-018 ASSEMBLY OF A COAXIAL CABLE XF ONTO DR24 CABLES, USING SOLDER SLEEVE ASNE0160 OR ABS0237 AND out out
AIPI07-01-021 SPLICE ASNE0541
SOLUTION DE DÉRIVATION BUS SAPHIR EDS À L¿AIDE DU CÂBLE KD24 ET DE RACCORDS ASNE0541 POUR LE out out
AIPI07-01-023 PROGRAMMESHIELDED
GROUNDING A400M CABLES out out
AIPI07-01-024 INSTALLATION OF RACEWAYS IN WINGS ASA AC7135 & AC7135/1
AIPI07-02-001 GENERAL REQUIREMENTS FOR THE STRIPPING OF THE ELECTRICAL CABLES out out
AIPI07-02-002 PRÉPARATION DES EXTRÉMITÉS DE CÂBLES SPÉCIAUX out out
AIPI07-02-005 INSTALLATION OF COAXIAL CONNECTOR ASNE 0294 out out
AIPI07-02-006 INSTALLATION OF CONNECTOR NSA938925 out out
AIPI07-02-009 GENERAL REQUIREMENTS FOR THE STRIPPING OF ELECTRICAL SINGLE CONDUCTOR CABLED DR AND AD SERIES out out
AIPI07-03-001 CRIMPING OF CONTACTS TO COPPER CABLES out out
AIPI07-04-001 GENERAL REQUIREMENTS FOR CRIMPING OF ELECTRIC TERMINAL LUGS out out
AIPI07-04-003 MISE EN ¿UVRE DES COSSES NSA936501TA out out
AIPI07-04-004 INSTALLATION OF SPLICES NSA936809 out out
AIPI07-04-005 INSTALLATION DE COSSES NON ISOLÉES out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 10
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPI07-04-006 INSTALLATION OF BUTT SPLICES ASNE0360 out out
AIPI07-04-007 INSTALLATION OF CAPS NSA936601 AND NSA936604 out out
AIPI07-04-009 INSTALLATION OF TERMINALS ASNE0422 TR ON ALUMINIUM CABLES out out
AIPI07-04-010 INSTALLATION DE COSSES EN ALUMINIUM SUR DES CÂBLES EN ALUMINIUM out out
AIPI07-04-011 INSTALLATION OF SPLICE, BUTT TYPE, NSA936813 RH ON ALUMINIUM/ALUMINIUM OR COPPER/ALUMINIUM CABLES out out
AIPI07-04-017 INSTALLATION DES COSSES PLATES out out
AIPI07-04-019 INSTALLATION OF TERMINALS ABS 0909 out out
AIPI07-04-022 SERTISSAGE DES COSSES NSA936504 out out
AIPI07-04-023 CRIMPING OF 24 TO 12 ALUMINIUM ELECTRICAL CABLES ABS0949 (AD SERIES) ONTO CONTACTS ABS1380 AND out out
AIPI07-04-024 1381
GENERAL REQUIREMENTS FOR THE CIMPING OF 10 TO 04 SIZE ALUMINIUM ELECTRICAL CABLES ABS0949 AD out out
AIPI07-04-027 SERIES
GENERALONTO CONTACTS FOR
REQUIREMENT ABS1380 AND ABS1381
CRIMPING SIZES 04 TO 12 CU CABLE ONTO CONTACTS ABS1344 AND ABS1403 out out
AIPI07-04-028 INSTALLATION OF TWINAX CONTACTS ABS1111 & ABS1112 out out
AIPI07-04-030 INSTALLATION OF BUTT SPLICES ASNE0541 out out
AIPI07-04-031 EXIGENCES GÉNÉRALES RELATIVES AU SERTISSAGE DES CÂBLES ÉLECTRIQUES ALUMINIUM DE JAUGES 24 À 12 out out
AIPI07-04-032 ABS0949 (SÉRIE
MONTAGE AD) SUR DES CONTACTS
DES COMPOSANTS STANDARDSABS1380 ETMIL
- NORME ABS1381 À L¿AIDE D¿OUTILS DE SERTISSAGE MUTI-JAUGES
BUS 1553 out out
AIPI07-04-036 GENERAL REQUIREMENTS FOR CRIMPING OF ELECTRIC TERMINAL LUGS out out
AIPI07-04-037 MANUFACTURING OF TRIAXIAL CONTACTS out out
AIPI07-05-002 MONTAGE DE CONNECTEURS DE RACK RECTANGULAIRES ASNE0086 & ASNE0145 & ASNE0146 & ASNE0147 & out out
AIPI07-05-003 ASNE0726 & ASNE0729
CONNECTEURS DE RACK ASNE0161/163/165 ET ABS0831 out out
AIPI07-05-005 ASSEMBLY AND CONNECTION OF RAIL MOUNTED TERMINAL MODULES out out
AIPI07-05-006 INSTALLATION OF RECTANGULAR CONNECTORS out out
AIPI07-05-007 INSTALLATION OF COMPOUND FILLED PRESSURE SEALS out out
AIPI07-05-008 INSTALLATION OF INDICATOR LIGHTS ASNE 0415 IN SLEEVES ASNE 0416 out out
AIPI07-05-009 INSTALLATION OF BASE FITTED INDCATOR LIGHTS NSA 933661 THROUGH 663, NSA 933672 THROUGH 679, NSA out out
AIPI07-05-010 933681 THROUGH
INSTALLATION 683, NSA 933686EN3646
OF CONNECTORS THROUGH
TYPE689 out out
AIPI07-05-011 INSTALLATION OF CONNECTORS EN6047-003/-004 (ASNE0098 AND ASNE0378) AND CONTACT EN3155-052M4A2A out out
AIPI07-05-016 INSTALLATION DE CONNECTEURS COAXIAUX, TYPES TNC, BNC, N ET C out out
AIPI07-05-022 POSE DE CONNECTEURS ASNE0684 (ANCIENNEMENT NSA9380274), ASNE0734 (ANCIENNEMENT NSA938028) out out
AIPI07-05-023 NSA938026, ABS1495
INSTALLATION ET ABS1555
OF ELECTRICAL CONNECTORS ASNE 0093 AND ASNE 0094 out out
AIPI07-05-024 INSTALLATION OF CONNECTORS ASNE 0076 AND ASNE 0150 out out
AIPI07-05-025 INSTALLATION OF PLUG CONNECTOR ASNE 0511 out out
AIPI07-05-027 INSTALLATION DES CONNECTEURS ASNE0186, ASNE0187 ET ASNE0579 out out
AIPI07-05-028 INSTALLATION OF DIODES AND RESISTORS ON CONNECTOR NSA 938361 out out
AIPI07-05-030 INSTALLATION OF CONNECTORS ASNE 0087 AND ASNE 0097 out out
AIPI07-05-032 INSTALLATION DES CONNECTEURS EN2997 ET EN3645 out out
AIPI07-05-034 INSTALLATION OF RECTANGULAR CONNECTORS ASNE 0237 AND ASNE 0302 out out
AIPI07-05-035 INSTALLATION OF COAXIAL CONNECTORS NSA938603, NSA938604, NSA938608 out out
AIPI07-05-038 INSTALLATION DE CONTACTS COAXIAUX out out
AIPI07-05-039 INSTALLATION DE TRAVERSÉES DE CLOISON ÉTANCHES À COLLERETTE RONDE ET JOINT TORIQUE out out
AIPI07-05-041 INSTALLATION OF CONNECTORS D-SUB MINIATURE out out
AIPI07-05-042 INSTALLATION OF CABLE BRACKETS AND SUPPORTS out out
AIPI07-05-043 INSTALLATION DES CONTACTS QUADRAX out out
AIPI07-05-045 INSTALLATION OF CONDUCTIVE BACKSHELL FOR D-SUB MINIATURE CONNECTOR, ABS1069 out out
AIPI07-05-047 MISE EN OEUVRE DU COLLIER MÉTALLIQUE ASNE0805 out out
AIPI07-05-048 INSTALLATION OF GROUND POWER RECEPTABLE out out
AIPI07-05-050 ASSEMBLY AND CONNECTION OF TERMINAL BLOCKS out out
AIPI07-05-051 INSTALLATION DE COMPOSANTS POUR LE BUS CAN out out
AIPI07-05-052 INSTALLATION OF BATTERY CONNECTORS out out
AIPI07-05-053 INSTALLATION OF QUICK-RELEASE-CONNECTOR ABS1152, ABS0364 AND ABS1019 out out
AIPI07-05-060 INSTALLATION OF GROUNDING MODULE FOR ARINC 600 SIZE 2 AND SIZE 3 (ABS1575) out out
AIPI07-05-062 PROCÉDÉ D¿ASSEMBLAGE DES TRAVERSÉES ÉTANCHES ABS1571 out out
AIPI07-05-064 INSTALLATION OF SERVICING CONNERCTORS out out
AIPI07-05-065 INSTALLATION OF LED LIGHTED PUSHBUTTON SWITCH ABS 1550 out out
AIPI07-05-067 MISE EN OEUVRE DU CONNECTEUR COAXIAL SMA DE TYPE ABS1611 out out
AIPI07-05-070 INSTALLATION OF SEALED LED LIGHT INDICATOR ABS 1436 out out
AIPI07-05-072 INSTALLATION OF LED ILLUMINATED PUSHBUTTON SWITCHES out out
AIPI07-05-074 ASSEMBLAGE DES PRISES JACK DE TÉLÉPHONE ET DES PRISES AUDIO out out
AIPI07-05-078 INSTALLATION DE PRISES COAXIALES À L¿AIDE DE COLLIERS (CONNEXION NON SERTIE) out out
AIPI07-05-079 ASSEMBLY OF MODULAR CONNECTORS FAMILY out out
AIPI07-06-001 LSER WIRE AND CABLE MARKING BY ULTRA VIOLET (UV) PROCESS out out
AIPI07-06-002 IDENTIFICATION ET MARQUAGE DES INSTALLATIONS ÉLECTRIQUES out out
AIPI07-06-004 PROCÉDÉ DE MARQUAGE DE L¿IDENTIFICATION DES HARNAIS ÉLECTRIQUES (MANCHON NSA937201 ET out out
AIPI07-06-006 ÉTIQUETTE ASNE0248)
INSTALLATION OF PRE-PRINTED SELF-ADHESIVE INDEX STRIPS TO CIRCUIT BREAKER PANELS out out
AIPI07-06-007 PROCÉDÉ DE POSE ET DE MARQUAGE DES ÉTIQUETTES ABS0724, ABS0970, ASNE0470 ET NSA9117 out out
AIPI07-07-001 INSTALLATION OF HEAT SHRINK TUBING AND SLEEVES out out
AIPI07-07-002 GAINES TEXTILES POUR PROTECTION CÂBLE ÉLECTRIQUE out out
AIPI07-07-004 DRAINAGE OF CONVOLUTED CONDUITS out out
AIPI07-07-005 MISE EN OEUVRE DES GAINES TEXTILES BLINDÉE EN4674-003 ET EN4674-004 POUR PROTECTION EMI DES CABLES out out
AIPI07-08-003 ÉLECTRIQUES
ALLOWED TOLERANCES ON ELECTRICAL INSTALLATION out out
AIPI07-08-004 RÉPARATION DES CÂBLES ÉLECTRIQUES out out
AIPI07-08-005 CLEANING PROCEDURE FOR STANDARD ELECTRICAL COMPONENTS out out
AIPI07-09-002 ELECTRICAL AND OPTICAL TESTS OF AIRCRAFT WIRING (FUNCTIONAL TESTS EXCLUDED) out out
AIPI07-11-001 FABRICATION ET INSTALLATION DES CABLES OPTIQUES out out
AIPI07-11-002 TERMINATION OF ABS0929-003 AND ABS0929-004 SINGLEWAY OPTICAL CONNECTOR ONTO ABS0963-003LF out out
AIPI07-11-003 OPTICAL CABLE
INSTALLATION DU CONTACT OPTIQUE ABS1379-003 AVEC UN CÂBLE OPTIQUE ABS0963-003 LF out out
AIPI07-11-004 ASSEMBLY OF ABS1906 OPTICAL CONTACT ON ABS0963 TYPE LF OPTICAL CABLE out out
AIPI07-11-005 INSERTION LOSS MEASUREMENT ON OPTICAL LINKS out out
AIPI07-11-006 FIBRE OPTIC TECHNOLOGY ¿ CLEANING METHODS out out
AIPI07-11-007 INSTALLATIONS DES FIBRES OPTIQUES ¿ DIAGNOSTIC DE PANNE out out
AIPI07-11-008 FIBRE OPTIC - MANUFACTURING TERMINATION IN AIRCRAFT out out
AIPI08-01-002 MARKING BY VIBRO-ENGRAVING out out
AIPI08-02-002 INSTALLATION OF IDENTIFICATION LABELS IN HYDRAULIC FLUID AREAS ASA AC7135
AIPI08-02-003 IDENTIFICATION BY BAG AND TAG out out
AIPI08-02-004 PRINTING AND INSTALLATION OF THERMAL ACTIVATED IDENTIFICATION TAPES ABS 0652 AND ABS 0653 out out
AIPI08-02-005 APPLICATION DE MARQUAGES SUR LES SURFACES EXTERNES DE L¿AVION out out
AIPI08-02-007 INSTALLATION OF SELF-ADHESIVE LABELS ON NON-HYDRAULIC PIPE CIRCUITS out out
AIPI08-03-001 ELECTROCHEMICAL MARKING out out
AIPI08-03-002 MARQUAGE PERMANENT À L¿ENCRE out out
AIPI09-01-002 CLEANING WITH LIQUID NON AQUEOS AGENTS CP AC7108
AIPI09-01-003 MISE EN OEUVRE DES PRODUITS DE NETTOYAGE LIQUIDES CP AC7108
AIPI09-01-007 CLEANING OF AIRCRAFT WINDOWS out out
AIPI09-01-013 FINAL CLEANING OF OXYGEN PIPES, FITTINGS AND OTHER COMPONENTS out out
AIPI09-01-014 FINAL CLEANING OF HYDRAULIC PIPES out out
AIPI09-01-015 DISINFECTION OF POTABLE WATER SYSTEM out out
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
AIPI09-02-005 PICKLING OF TITANIUM AND ITS ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
AIPI09-03-001 CHEMICAL MILLING OF ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108 & AC7108/5
AIPI09-03-002 CHEMICAL MILLING OF TITANIUM ALLOYS CP AC7108 & (AC7108/5 or AC7108/2)
AIPI09-04-001 SURFACE PREPARATION PRIOR TO EXTERNAL PAINT APPLICATION CP AC7108
AIPI25-02-001 INSTALLATION EXTENSOMETRIQUE JUSQU - À 130°C PONT TYPE A : MESURES DE DÉFORMATION out out
AIPI25-02-002 UNIDIRECTIONNELLE
INSTALLATION EXTENSOMÉTRIQUE JUSQU¿À 130°C PONT TYPE B : MESURE DE DÉFORMATION SUR UNE PIÈCE out out
AIPI25-02-003 SOLLICITÉE
INSTALLATIONENEXTENSOMETRIQUE
TRACTION/COMPRESSION
JUSQU¿À 130°C PONT TYPE C : MESURE DE DÉFORMATION SUR UNE PIÈCE out out
AIPI25-02-004 SOLLICITÉE ENEXTENSOMETRIQUE
INSTALLATION FLEXION-TORSION-CISAILLEMENT
JUSQU¿À 130°C TYPE D : MESURE DYNAMIQUE DE DÉFORMATION out out
AIPI25-03-001 UNIDIRECTIONNELLE
EXTENSOMETRY INSTALLATION FOR TEMPERATURES UP TO 130°C INSIDE FUEL TANK MAINLY MADE OF out out
AIPI25-03-002 COMPOSITE MATERIALS TYPE A BRIDGE:
INSTALLATION EXTENSOMÉTRIQUE INTÉRIEURUNIDIRECTIONAL
RÉSERVOIRSTRAIN MEASUREMENTS COMPOSITE JUSQU¿À 130°
AVION MAJORITAIREMENT out out
AIPI25-03-003 C PONT TYPE BEXTENSOMÉTRIQUE
INSTALLATION : MESURE DE DÉFORMATION SUR
INTÉRIEUR UNE PIÈCE
RÉSERVOIR SOLLICITÉE
AVION EN TRACTION
MAJORITAIREMENT & COMPRESSION
COMPOSITE JUSQU¿À 130° out out
AIPI25-03-004 C PONT TYPE CEXTENSOMÉTRIQUE
INSTALLATION : MESURE DE DÉFORMATION
INTÉRIEURSUR UNE PIÈCE
RÉSERVOIR SOLLICITÉE
AVION EN FLEXION COMPOSITE
MAJORITAIREMENT ¿ TORSION ¿JUSQU¿À
CISAILLEMENT
130° out out
AIPI25-04-001 C TYPE D : MESURE
INSTALLATION DYNAMIQUE DEJUSQU¿À
EXTENSOMETRIQUE DÉFORMATION
280°C UNIDIRECTIONNELLE
PONT TYPE A : MESURE DE DÉFORMATION out out
AIPI25-04-002 UNIDIRECTIONNELLE
INSTALLATION EXTENSOMÉTRIQUE JUSQU¿À 280°C PONT TYPE B : MESURE DE DÉFORMATION SUR UNE PIÈCE out out
AIPI25-04-003 SOLLICITÉE ENEXTENSOMÉTRIQUE
INSTALLATION TRACTION/COMPRESSION
JUSQU' À 280°C PONT TYPE C : MESURE DE DÉFORMATION SUR UNE PIÈCE out out
AIPI25-04-004 SOLLICITÉE ENEXTENSOMÉTRIQUE
INSTALLATION FLEXION-TORSION-CISAILLEMENT
JUSQU¿À 280°C TYPE D : MESURE DYNAMIQUE DE DÉFORMATION out out
AIPI25-05-001 UNIDIRECTIONNELLE
INSTALLATION DE THERMOSONDE POUR MESURE DE TEMPÉRATURE DE SURFACE EN MILIEU NON PERTURBÉ out out
AIPI25-05-002 INSTALLATION DE THERMOSONDE POUR MESURE DE TEMPÉRATURE DE SURFACE EN MILIEU PERTURBÉ (SAUF out out
AIPI25-05-003 PAROI DE VERRE,
INSTALLATION PLEXIGLAS, MATÉRIAU
DE THERMOSONDE COMPOSITE)
POUR MESURE DE TEMPÉRATURE DE SURFACE EN MILIEU PERTURBE (SUR out out
AIPI25-05-004 MATÉRIAU COMPOSITE)
INSTALLATION OF TEMPERATURE SENSORS FOR SURFACE TEMPERATURE MEASUREMENTS INSIDE FUEL TANKS out out
AIPI25-05-005 (EXCEPT FOR AIRCRAFT
INSTALLATION MAINLY MADE
OF TEMPERATURE OF COMPOSITE
SENSORS MEASURINGMATERIALS)
SURFACE TEMPERATURES OF FLEXIBLE OR RIGID out out
CYLINDRICAL ITEMS
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 11
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPI25-05-006 INSTALLATION OF TEMPERATURE SENSORS FOR FLUID TEMPERATURE MEASUREMENTS IN PIPES out out
AIPI25-05-007 INSTALLATION OF TEMPERATURE SENSORS ON COMMERCIAL FURNISHINGS out out
AIPI25-05-008 INSTALLATION DE THERMOSONDE INTÉRIEUR RÉSERVOIR AVION MAJORITAIREMENT COMPOSITE POUR MESURE out out
AIPI25-06-001 DE TEMPÉRATURE
INSTALLATION DE SURFACE
DE THERMOCOUPLE RIVETÉ POUR MESURE DE TEMPÉRATURE DE SURFACE EN MILIEU out out
AIPI25-06-002 AÉRODYNAMIQUEMENT PERTURBÉ COLLÉ POUR MESURE DE TEMPÉRATURE DE SURFACE
INSTALLATION DE THERMOCOUPLE out out
AIPI25-06-003 INSTALLATION DE THERMOCOUPLES SOUDÉS POUR MESURE DE HAUTE TEMPÉRATURE DE SURFACE out out
AIPI25-07-001 INSTALLATION DE SUPPORTS ALUMINIUM (GLOVES) POUR CAPTEURS MINIATURES AFFLEURANTS out out
AIPI25-07-003 INSTALLATION SUPPORT SOUPLE (PENNYWASHER) POUR CAPTEURS MINIATURES AFFLEURANTS out out
AIPI25-07-004 COLLAGE CAPTEUR DE PRESSION AVEC ÉLÉMENT SENSIBLE DÉPORTÉ out out
AIPI25-08-001 BONDING OF ACCELEROMETERS AND PROXIMITY SENSORS out out
AIPI25-08-002 COLLAGE ACCÉLÉROMÈTRE HAUTE TEMPÉRATURE out out
AIPI25-09-001 MONTAGE JOINTS RACCORDS POUR CAPTEURS GG39X, GG49X, GG58X, GG59X, GG56X out out
AIPI25-09-003 INSTALLATION OF PNEUMATIC BUNDLE FOR 64-CHANNEL MPS 64 SYSTEM out out
AIPI25-09-004 INSTALLATION OF PNEUMATIC BUNDLE FOR 32-CHANNEL MPS SYSTEM out out
AIPI25-09-005 MONTAGE DES RACCORDS DOUBLE BAGUE out out
AIPI25-10-001 MONTAGE DES PRISES FRB SÉRIES HKU505/513 out out
AIPI25-10-002 CABLAGE CONNECT. SUB DHD 15/NSA935399-413 out out
AIPI25-10-003 MISE EN OEUVRE CONNECTEURS ELECTRIQUES NSA938355 ET NSA938998-11 out out
AIPI25-11-001 USE OF CABLE ABS0972 ON NSA938361 AND NSA938998-11K52 out out
AIPI25-12-001 INSTALLATION ROTOR SUR ARBRE TOURNANT POUR MESURE DE COUPLE PAR TÉLÉMESURE out out
AIPI98-01-001 INSTALLATION DU MANCHON D¿ACCOUPLEMENT ABS1617 POUR RÉPARATION DE CÂBLE QUADRAX out out
AIPI98-03-001 REPAIR PROCESS FOR ABS0963-003LF OPTICAL FIBRE CABLE BY FUSION SPLICING out out
AIPS00-00-001 INTRODUCTION out out
AIPS00-00-002 STRUCTURE OF AIRBUS INDUSTRIE PROCESS SPECIFICATIONS out out
AIPS00-00-003 NUMBERING SYSTEM out out
AIPS00-00-005 INDEX OF APPROVED REPLACEMENT SPECIFICATIONS out out
AIPS00-00-006 REFERENCE-LIST AIRBUS PROCESS SPECIFICATIONS AND INSTRUCTIONS out out
AIPS01-00-001 APPROVED ALTERNATIVE STANDARD PARTS FOR FASTENING out out
AIPS01-01-004 INSTALLATION OF SOLID RIVETS ASA AC7135 & AC7135/1
INSTALLATION OF SOLID RIVETS (FOR APPLICATIONS IN THE PROGRAMS WB, SA, LR, A380 AND A400M THAT ARE
AIPS01-01-005 UNDER DESIGN RESPONSIBILITY OF A-UK) ASA AC7135 & AC7135/1
INSTALLATION OF SOLID RIVETS (FOR APPLICATIONS IN THE PROGRAMS WB, SA, LR, A380 AND A400M THAT ARE
AIPS01-01-006 UNDER DESIGN RESPONSIBILITY OF A-D) ASA AC7135 & AC7135/1
INSTALLATION OF SOLID RIVETS AND SLUG (FOR APPLICATIONS IN THE PROGRAMS WB, SA, LR, A380 AND A400M
AIPS01-01-007 THAT ARE UNDER DESIGN RESPONSIBILITY OF A-F) ASA AC7135 & AC7135/1
INSTALLATION OF SOLID RIVETS (FOR APPLICATIONS IN THE PROGRAMS WB, SA, LR, A380 AND A400M THAT ARE
AIPS01-01-008 UNDER DESIGN RESPONSIBILITY OF A-E) ASA AC7135 & AC7135/1
AIPS01-02-002 INSTALLATION OF TAPER SHANK BOLTS ASA AC7135 & AC7135/1
AIPS01-02-003 PREPARATION OF HOLES IN METALLIC MATERIALS FOR FASTENING ASA AC7135 & AC7135/1
AIPS01-02-003-01 ORBITAL DRILLING FOR METALLIC MATERIALS ASA AC7135
AIPS01-02-005 PREPARATION OF HOLES IN FIBRE REINFORCED PLASTIC (FRP) AND HYBRID MATERIALS ASA or COMP AC7135 or AC7118 PAR
AIPS01-02-005-01 ORBITAL DRILLING FOR NON-METALLIC MATERIALS ASA AC7135
AIPS01-02-006 AIRBUS INDUSTRIE PROCESS SPECIFICATION INSTALLATION OF LOCKBOLTS PULL AND STUMP TYPES ASA AC7135 & AC7135/1
AIPS01-02-008 AIRBUS PROCESS SPECIFICATION TORQUE TIGHTENING OF SCREWS, BOLTS AND NUTS ASA AC7135
AIPS01-02-012 MACHINING AND ASSEMBLY OF GLARE PARTS/ COMPONENTS out out
AIPS01-02-013 INSTALLATION OF BLIND BOLTS PULL-TYPE ASA AC7135 & AC7135/1
AIPS01-02-014 INSTALLATION OF COLD EXPANDED RETAINERS ASA AC7135
AIPS01-02-015 INSTALLATION OF BLIND BOLTS THREADED TYPE ASA AC7135 & AC7135/1
AIPS01-02-016 INSTALLATION OF RIVETLESS NUTPLATES ASA AC7135 & AC7135/1
AIPS01-02-017 GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS ASA AC7135 & AC7135/1
AIPS01-02-019 INSTALLATION OF BUSHES, SHRINK AND PRESS FIT ASA AC7135 & AC7135/3
AIPS01-02-022 INSTALLATION OF PARALLEL SHANK THREADED FASTENERS ASA AC7135 & AC7135/1
AIPS01-02-025 INSTALLATION OF ASNA2705 RIVET ASA AC7135 & AC7135/1
AIPS01-02-026 INSTALLATION OF COLD EXPANDED MODULAR RETAINERS ASA AC7135
AIPS01-02-027 INSTALLATION OF BLIND RIVET NUTS ASA AC7135 & AC7135/1
AIPS01-02-028 INSTALLATION OF PRELOAD-CONTROLLED TENSION BOLTS ASA AC7135 & AC7135/1
AIPS01-02-032 LASER DRILLING OF HARD METALS FOR FASTENING NM AC7116 & AC7116/4
AIPS01-02-033 HOLE PREPARATION WITH ORBITAL AND HYPOCYCLOIDAL DRILLING PROCESSES FOR FASTENING ASA AC7135
AIPS01-02-035 INSTALLATION OF FASTENERS USING A TENSIONING SYSTEM ASA AC7135 & AC7135/1
AIPS01-03-001 INSTALLATION OF COLD EXPANSION BUSHES INTO NON METALLIC MATERIALS ASA AC7135 & AC7135/3
AIPS01-03-002 MANUAL FASTENING OF 2- OR 4- START QUICK RELEASE FASTENERS WITH OR WITHOUT ACRES SLEEVES ASA AC7135 & AC7135/1
AIPS01-03-003 INSTALLATION OF INSERTS IN NON METALLICS ASA or COMP AC7135 or AC7118 PAR
AIPS01-03-004 INSTALLATION OF HELICOIL THREADED INSERTS ASA AC7135
AIPS01-03-005 INSTALLATION OF METALLIC INSERTS (ACRES SLEEVES) ASA or COMP AC7135 or AC7118 PAR
AIPS01-03-006 INSTALLATION OF TAPERED SLEEVED FASTENERS ASA AC7135 & AC7135/1
AIPS01-03-007 INSTALLATION OF SEALED NUT CAPS ASA AC7135 & AC7135/4
AIPS01-03-008 INSTALLATION OF PARALLEL SHANK SLEEVED FASTENERS ASA AC7135 & AC7135/1
AIPS01-03-009 INSTALLATION OF COLD EXPANDED SLEEVES ASA AC7135 & AC7135/1
AIPS01-03-010 INSTALLATION OF THREADED INSERTS out out
AIPS01-03-011 INSTALLATION OF INJECTION NUT CAPS AND HEAD CAPS out out
AIPS01-04-001 GENERAL REQUIREMENTS FOR WELDING AND ALLIED PROCESSES WELD AC7110
AIPS01-04-004 RESISTANCE WELDING WELD AC7110 & AC7110/4
AIPS01-04-008 TUNGSTEN INERT GAS (TIG) WELDING OF METALLIC MATERIALS WELD AC7110 & AC7110/5
AIPS01-04-011 ELECTRON BEAM WELDING OF HARD METAL WELD AC7110 & AC7110/3
AIPS01-04-012 RESISTANCE WELDING OF THERMOPLASTIC MATERIALS out out
AIPS01-04-013 LASER BEAM WELDING OF HARD METALS WELD AC7110 & AC7110/6
AIPS01-04-014 FRICTION STIR WELDING OF ALUMINIUM ALLOYS out out
AIPS01-04-015 WELDING OF THERMOPLASTIC PARTS out out
AIPS01-04-016 LASER BEAM WELDING OF OF ALUMINIUM ALLOYS IN T-JOINT CONFIGURATIONS WELD AC7110 & AC7110/6
AIPS01-04-017 BRAZING OF METALLIC MATERIALS WELD AC7110 & AC7110/1
AIPS01-04-018 PLASMA ARC WELDING (PAW) OF METALLIC MATERIALS WELD AC7110 & AC7110/5
AIPS01-04-019 LINEAR FRICTION WELDING FOR TITANIUM ALLOYS out out
AIPS01-04-020 ADDITIVE MANUFACTURING - POWDER BED FUSION WELD AC7110 & AC7110/14
AIPS02-01-001 CHROMIC ACID ANODIZING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/8
AIPS02-01-002 SULPHURIC ACID ANODIZING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/8
AIPS02-01-003 TARTARIC SULPHURIC ANODISING OF ALUMINIUM ALLOYS FOR CORROSION PROTECTION AND PAINT CP AC7108 & AC7108/8
AIPS02-01-004 PRETREATMENT.
ANODIZING OF TITANIUM AND ITS ALLOYS CP AC7108 & AC7108/8
AIPS02-01-005 HARD ANODIZING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/8
AIPS02-01-006 PHOSPHORIC SULPHURIC ANODISING (PSA) OF ALUMINIUM ALLOYS PRIOR TO STRUCTURAL BONDING CP AC7108 & AC7108/3
AIPS02-02-001 SHOT PEENING FORMING OF METAL PARTS SE AC7117 & AC7117/3
AIPS02-02-002 SABLAGE SEC CP or SE AC7108 or AC7117
AIPS02-02-003 WET BLASTING CP AC7108
AIPS02-02-004 SHOT PEENING FOR FATIGUE ENHANCEMENT OF METAL PARTS SE AC7117 & AC7117/1 & AC7117/2 & AC7117/5
AIPS02-02-005 COLD EXPANSION IN METALLIC MATERIALS - SPLIT SLEEVE PROCESS ASA AC7135
AIPS02-02-006 COLD EXPANSION IN METALLICS - SPLIT MANDREL PROCESS ASA AC7135
AIPS02-02-008 DECORATIVE BRUSHING out out
AIPS02-02-010 INSTALLATION OF BUSHES BY COLD EXPANSION PROCESS IN METALLIC MATERIALS ASA AC7135 & AC7135/3
AIPS02-02-011 LASER SHOCK PEENING OF METAL PARTS SE AC7117
AIPS02-02-013 THERMOCHEMICAL TREATMENT OF STEELS BY NITRIDING HT AC7102 & AC7102/4
AIPS02-02-014 CARBURISING OF STEELS HT AC7102 & AC7102/3
AIPS02-02-015 COLD EXPANSION IN METALLIC MATERIALS - VARIABLE EXPANSION PROCESS ASA AC7135 & AC7135/1
AIPS02-03-001 APPLICATION OF THERMAL SPRAY COATINGS WC-CO AND WC-CO-CR out out
AIPS02-03-002 COPPER ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY THERMAL SPRAYING out out
AIPS02-03-003 PHYSICAL VAPOR DEPOSITION OF TITANIUM NITRIDE FOR COATING OF NICKEL ALLOYS, STAINLESS STEELS AND out out
AIPS02-03-004 TITANIUM ALLOYS
DEPOSITION OF ALUMINIUM BY THE THERMAL SPRAY PROCESS out out
AIPS02-03-005 DEPOSITION OF ZINC BY THE THERMAL SPRAY PROCESS out out
AIPS02-03-006 ION VAPOUR DEPOSITION (IVD) OF ALUMINIUM out out
AIPS02-03-007 APPLICATION OF THERMALLY SPRAYED COBALT CHROMIUM MOLYBDENUM COATINGS out out
AIPS02-03-008 COPPER ALUMINIUM IRON ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY FLAME THERMAL out out
AIPS02-03-009 SPRAYING
COPPER NICKEL INDIUM ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY PLASMA THERMAL out out
AIPS02-03-011 SPRAYING
MOLYBDENUM COATING OF TI6AL4V, INCONEL AND VERY HIGH STRENGTH STAINLESS STEEL (RM > 1200 MPA) BY out out
AIPS02-03-012 THERMAL SPRAYING
CHEMICAL VAPOUR DEPOSITION CVD OF TUNGSTENTUNGSTEN CARBIDE out out
AIPS02-04-001 APPLICATION OF CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUNDS CP AC7108
AIPS02-04-002 ELECTROLYTIC CADMIUM PLATING CP AC7108 & AC7108/9
AIPS02-04-004 HARD CHROMIUM PLATING OF STEELS CP AC7108 & AC7108/9
AIPS02-04-005 HARD CHROMIUM PLATING OF STEELS FOR HIGH CORROSION RESISTANCE CP AC7108 & AC7108/9
AIPS02-04-006 ELECTROLYTIC ZINC-NICKEL PLATING CP AC7108 & AC7108/9
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 12
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPS02-04-007 WC-C:H COATING BY PHYSICAL VAPOUR DEPOSITION out out
AIPS02-04-008 ELECTROLESS (CHEMICAL) NICKEL - PHOSPHORUS PLATING CP AC7108 & AC7108/10
AIPS02-04-009 APPLICATION OF CORROSION INHIBITING SOLID FILM LUBRICANT CP AC7108 & AC7108/1
AIPS02-04-010 PAD CADMIUM PLATING OF STEELS CP AC7108 & AC7108/13
AIPS02-04-011 ELECTROLESS (CHEMICAL) NICKEL PHOSPHORUS ¿ PTFE DUPLEX COATING out out
AIPS02-04-013 NON CHROMIUM (VI) PASSIVATION FOR CADMIUM PLATING CP AC7108 & AC7108/12
AIPS02-05-001 CHEMICAL CONVERSION COATING CP AC7108 & AC7108/11
AIPS02-05-003 PASSIVATION OF MARTENSITIC AND AUSTENITIC STAINLESS STEEL CP AC7108 & AC7108/12
AIPS02-05-004 PHOSPHATING OF STEEL CP AC7108 & AC7108/11
AIPS02-05-005 PASSIVATION OF CORROSION RESISTANT STEEL CP AC7108 & AC7108/12
AIPS03-01-001 PIPING GAMAH-SYSTEM out out
AIPS03-01-003 ASSEMBLY AND INSTALLATION OF JANITROL COUPLINGS out out
AIPS03-01-010 MANUFACTURING OF PIPES out out
AIPS03-01-011 INTERNAL ROLLER SWAGED PIPE COUPLINGS out out
AIPS03-01-012 EXTERNAL SWAGING OF FITTINGS ON 5 080 PSI TITANIUM TUBES out out
AIPS03-01-013 EXTERNAL SWAGING OF SLEEVES ON 5 080 PSI TITANIUM TUBES out out
AIPS03-01-015 BLANKING OF PIPES, HOSES AND COMPONENTS out out
AIPS03-01-017 MANUFACTURING OF THERMOPLASTIC PIPES out out
AIPS03-02-001 MANUFACTURING OF STRUCTURAL FIBRE REINFORCED PLASTIC (FRP) COMPONENTS, GENERAL SPECIFICATIONS COMP AC7118 PAR
AIPS03-02-007 REMOVAL OF DECORATIVE SHEET MATERIALS FOR FURNISHINGS AND COMPONENTS USED IN AIRCRAFT out out
AIPS03-02-008 INTERIORS
THERMOFORMING OF THERMOPLASTIC SHEET MATERIALS out out
AIPS03-02-009 THE MANUFACTURE OF COMPOSITE COMPONENTS BY THE RESIN TRANSFER MOULDING PROCESS COMP AC7118 LRP
AIPS03-02-010 THE MANUFACTURE OF THERMOPLASTIC MATERIAL PARTS BY THE INJECTION MOLDING PROCESS out out
AIPS03-02-011 THE MANUFACTURE OF THERMOPLASTIC COMPOSITE COMPONENTS BY THE LAY UP TECHNIQUE out out
AIPS03-02-012 RUBBER PRESS MOULDING OF FIBRE REINFORCED THERMOPLASTIC SHEET out out
AIPS03-02-017 PREFORMING BY USING BINDER COATED TEXTILES out out
AIPS03-02-018 MANUFACTURE OF STRUCTURAL SANDWICH PARTS WITH THERMOSETTING FIBER REINFORCED SKINS COMP AC7118 PAR + CP
AIPS03-02-019 MANUFACTURE OF MONOLITHIC PARTS WITH THERMOSET PREPREG MATERIALS COMP AC7118 PAR
AIPS03-02-020 MANUFACTURING OF MONOLITHIC PARTS WITH THERMOPLASTIC MATERIAL out out
AIPS03-02-021 THE MANUFACTURE OF THERMOPLASTIC MATERIAL PARTS BY THE INJECTION MOLDING PROCESS out out
AIPS03-02-022 MANUFACTURE OF MONOLITHIC AND SANDWICH STRUCTURAL COMPONENTS BY IMPREGNATION OF DRY COMP AC7118 LRP + CP
AIPS03-02-023 REINFORCEMENT MATERIALS
MANUFACTURING OF ACOUSTICWITH THERMOSET RESIN
THERMOPLASTIC SANDWICH STRIPS out out
AIPS03-02-025 ASSEMBLY OF ACOUSTIC THERMOPLASTIC SANDWICH STRIPS out out
AIPS03-02-028 WINDING OF IMPREGNATED CARBON FIBRE FOR ACOUSTIC STRUCTURE COMP AC7118
AIPS03-02-029 FUSED DEPOSITION MODELING PROCESS out out
AIPS03-02-035 DRILLING MULTI HOLES IN CFRP FOR ACOUSTIC ATTENUATION COMP AC7118
AIPS03-03-001 REWORK OF SCRATCHES IN ALUMINIUM AND ALUMINIUM ALLOYS ON EXTERNAL SURFACES ASA AC7135
AIPS03-03-002 EMBREVEMENT out out
AIPS03-03-005 REALISATION D EPANOUIS ET DE BOURRELETS SUR TUYAUTERIES RIGIDES out out
AIPS03-03-006 WATER JET CUTTING NM - Not mandated AC7116 & AC7116/7
AIPS03-03-009 INSTALLATION OF AXIAL-SWAGED FITTINGS FOR OXYGEN SYSTEM out out
AIPS03-03-010 APPLICATION OF TEXTILE FLOOR COVERING out out
AIPS03-03-012 INSTALLATION OF BEARING, SPHERICAL BEARING AND BUSHES BY SWAGING ASA AC7135 & AC7135/3
AIPS03-03-013 EXTERNAL SWAGED PIPE SOCKETS out out
AIPS03-03-014 BONDING OF BEARINGS AND BUSHES BY ANAEROBIC COMPOUND ASA AC7135 & AC7135/3
AIPS03-03-015 MANUFACTURE OF ROLLED THREADS ON FASTENING PARTS AND COMPONENTS out out
AIPS03-03-016 SECURING HINGE PIN, PREVENTION OF TRANSLATIONAL MOVEMENT ASA AC7135
AIPS03-06-001 INSTALLATION DES PLAQUES DE PROTECTION POUR SEUILS DE PORTES ET POUR PHR out out
AIPS03-06-002 FREINAGE PAR RONDELLES FREINS out out
AIPS03-06-003 FREINAGE PAR FIT FREIN out out
AIPS03-06-004 LOCKING USING ANAEROBIC MATERIALS ASA AC7135 & AC7135/1
AIPS03-06-006 INTERNAL EXPANDER SWAGED PIPE COUPLINGS out out
AIPS03-06-007 EXTERNAL SWAGED PIPE COUPLINGS out out
AIPS03-06-008 INSTALLATION OF RIGID HYDRAULIC PIPES AND FLEXIBLE HOSES out out
AIPS03-06-009 SHIMMING FOR ASSEMBLY ASA AC7135
AIPS03-06-010 INSTALLATION OF OXYGEN PIPES out out
AIPS03-06-011 INSTALLATION OF O-RINGS IN FUEL PIPES out out
AIPS03-06-014 LOCKING BY SPLIT PIN ASA AC7135 & AC7135/1
AIPS03-06-015 TORQUE TIGHTENING OF A380 HYDRAULIC CONNECTIONS out out
AIPS03-06-016 INSTALLATION OF RING LOCKED PLUG IN UNION out out
AIPS03-06-017 INSTALLATION OF STRUCTURAL METALLIC RODS ASA AC7135
AIPS03-06-018 HOT GAS WELDING OF NON-TEXTILE FLOOR COVERINGS MADE OF PVC out out
AIPS03-06-019 APPLICATION OF NON-TEXTILE FLOOR COVERINGS out out
AIPS03-06-020 INSTALLATION OF AIR CONDITIONNING DUCTS out out
AIPS03-06-021 INSTALLATION OF COOLING & WATER & ANEMOMETRIC & RAIN REPELLENT & EXTINGUISHING & DRAINAGE out out
AIPS03-06-022 CIRCUIT PIPESOF BLEED AIR SYSTEM (DUCTS, DUCT CONNECTIONS, SOFT INSULATION SLEEVES, SENSE LINES,
INSTALLATION out out
AIPS03-06-024 OHDS).
INSTALLATION OF CARGO COMPARTMENT LINING out out
AIPS03-07-002 MACHINING OF FIBRE REINFORCED PLASTIC (FRP) COMPONENTS COMP AC7118 PAR
AIPS03-07-004 MANUFACTURE, INSTALLATION AND REWORK OF INSULATION BLANKETS out out
AIPS03-07-007 MANUFACTURING OF STRUCTURAL COMPONENTS FROM THERMOSETTING PREPREG MATERIALS COMP AC7118 PAR + CP
AIPS03-07-018 IN-SITU FOAMING OF COMPONENTS FOR NON-STRUCTURAL PARTS out out
AIPS03-07-019 HOT-FORMING OF THERMOSET PREPREG MATERIALS COMP AC7118 PAR
AIPS03-07-021 PREPARATION OF DRY FIBER PREFORMS FOR INFUSION & INJECTION TECHNIQUES COMP AC7118 LRP
AIPS03-07-022 THE MANUFACTURE OF THERMOPLASTIC MATERIAL PARTS BY THE LASER SINTERING PROCESS out out
AIPS03-07-023 MANUFACTURE OF SANDWICH PARTS WITH THERMOSETTING FIBRE REINFORCED SKINS FOR INTERIOR COMP AC7118 PAR
AIPS03-07-024 APPLICATION
MANUFACTURE OF FIBRE REINFORCED MONOLITHIC PARTS WITH THERMOSETTING PREPREG MATERIAL FOR COMP AC7118 PAR
AIPS03-07-025 INTERIOROF
FOLDING APPLICATION
COMPOSITES LOCATED INSIDE THE PRESSURIZED FUSELAGE (INTERIOR APPLICATION) out out
AIPS03-07-026 FILLING AND SPLICING OF SANDWICH PANEL HONEYCOMB CORES FOR INTERIOR PARTS COMP AC7118 CP
AIPS03-07-027 CUTTING OF COMPOSITES LOCATED INSIDE THE PRESSURIZED FUSELAGE (E.G. INTERIOR) out out
AIPS03-07-028 ATTACHMENT APPLICATION TO INTERIOR COMPOSITE PARTS out out
AIPS03-07-029 FINISHING OF FRP out out
AIPS03-07-030 COMPRESSION MOULDING OF SHEET MOULDING COMPOUNDS SMC AND BULK MOULDING COMPOUNDS BMC FOR COMP AC7118
AIPS03-07-031 INTERIOROF
JOINING APPLICATIONS
BINDERED DRY FIBRE PLIES AND PREFORMS BY ULTRASONIC WELDING out out
AIPS03-07-032 ULTRASONIC CUTTING OF FIBRE REINFORCED THERMOPLASTIC PARTS COMP AC7118
AIPS03-08-003 REWORK OF COMPOSITE MONOLITHIC AND SANDWICH PARTS COMP AC7118
AIPS03-09-001 LASER CUTTING OF STEEL, TITANIUM AND NICKEL ALLOYS NM AC7116 & AC7116/4
AIPS03-09-002 LASER CUTTING OF ALUMINIUM AND ALUMINIUM ALLOYS NM AC7116 & AC7116/4
AIPS03-09-003 SHEAR-CUTTING OF METALLIC SHEETS AND SECTIONS out out
AIPS03-09-004 ELECTRICAL DISCHARGE MACHINING OF HARD METALS NM AC7116 & AC7116/3
AIPS03-10-001 RECTIFICATION OF METALLIC MATERIALS BY SHOT PEENING SE - Not mandated AC7117 & AC7117/3
AIPS03-10-002 RECTIFICATION OF METALLIC MATERIALS BY ROLL FORMING out out
AIPS03-10-003 RECTIFICATION OF METALLIC MATERIALS BY 3 POINT BENDING out out
AIPS03-10-004 AGE FORMING OF ALUMINIUM ALLOYS out out
AIPS03-10-005 FORMING OF ALUMINIUM ALLOYS - GENERAL REQUIREMENTS out out
AIPS03-10-006 FORMING OF JOGGLES IN ALUMINIUM ALLOYS out out
AIPS03-10-007 SUPERPLASTIC FORMING OF ALUMINIUM ALLOYS out out
AIPS03-10-008 SUPERPLASTIC FORMING OF TITANIUM ALLOYS out out
AIPS03-10-011 HARD METAL FORMING - GENERAL REQUIREMENTS out out
AIPS03-11-001 MACHINING OF METALLICS out out
AIPS03-11-002 PRECISION GRINDING out out
AIPS03-11-003 DEBURRING AND MANUAL REWORK OF METALLIC COMPONENTS ASA AC7135
AIPS04-00-000 HEAT TREATMENT OF METALLIC MATERIALS - GENERAL HT AC7102
AIPS04-00-004 HEAT TREATMENT OF STEELS HT AC7102
AIPS04-00-005 HOT ISOSTATIC PRESSING OF METALLIC MATERIALS (HIP) HT AC7102 & AC7102/6
AIPS04-01-001 HEAT TREATMENT OF ALUMINIUM ALLOYS PARTS HT AC7102 & AC7102/2
AIPS04-01-002 HEAT TREATMENT OF SOLID RIVETS HT AC7102
AIPS04-02-001 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS HT AC7102
AIPS04-03-001 HEAT TREATMENT OF STEELS HT or CP AC7102 or AC7108
AIPS04-03-002 STRESS RELIEVE OF STEELS HT AC7102
AIPS04-04-001 HEAT TREATMENT OF NICKEL ALLOY PARTS HT AC7102
AIPS05-01-001 APPLICATION OF BASIC PRIMER CP AC7108 & AC7108/1
AIPS05-02-002 APPLICATION OF ANTI-STATIC PAINTS ON COMPOSITE PARTS CP AC7108 & AC7108/1
AIPS05-02-003 APPLICATION OF EXTERNAL PAINT SYSTEMS CP AC7108 & AC7108/1
AIPS05-02-006 APPLICATION OF DECORATIVE INTERIOR PAINT CP AC7108 & AC7108/1
AIPS05-02-007 REMOVAL OF PAINT FROM FURNISHING AND COMPONENTS USED IN AIRCRAFT INTERIORS out out
AIPS05-02-008 APPLICATION OF IN MOULD COATING FOR DECORATIVE INTERIOR PARTS out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 13
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPS05-02-009 APPLICATION OF STRUCTURAL PAINTS CP AC7108 & AC7108/1
AIPS05-02-010 APPLICATION OF DECORATIVE FILM COATING CP AC7108 & AC7108/1
AIPS05-02-011 REWORK OF PAINTS ON METALLIC AND NONMETALLIC STRUCTURAL PARTS CP AC7108 & AC7108/1
AIPS05-02-012 POWDER COATING OF METALLIC PARTS CP AC7108 & AC7108/1
AIPS05-02-013 APPLICATION OF ANTI-EROSION PAINT CP AC7108 & AC7108/1
AIPS05-02-014 APPLICATION OF FUEL VAPOUR BARRIER COATING CP AC7108 & AC7108/1
AIPS05-02-015 APPLICATION OF ANTISLIP EMERGENCY/WALKWAY PAINT CP AC7108 & AC7108/1
AIPS05-02-016 APPLICATION OF DECORATIVE SHEET MATERIAL out out
AIPS05-02-017 APPLICATION OF CORROSION INHIBITING COATING ON EXTERNAL UNPAINTED EROSION PRONE ALUMINIUM CP AC7108 & AC7108/1
AIPS05-02-018 SURFACES
ADHESION PROMOTER APPLICATION PRIOR TO EXTERNAL PAINT APPLICATION CP AC7108 & AC7108/2
AIPS05-03-001 PAINT STRIPPING BY PLASTIC MEDIA BLASTING CP AC7108 & AC7108/14
AIPS05-03-005 CHEMICAL STRIPPING OF AIRCRAFT EXTERNAL PAINT SYSTEM AND REPAINTING CP AC7108 & AC7108/14
AIPS05-03-006 COATING REMOVAL BY MEANS OF A LASER-TECHNIQUE FOR PREPARATION OF ELECTRICAL BONDING out out
AIPS05-04-002 CONNECTIONS
REPAIR SCHEMES TO ACHIEVE SURFACE STATUS REQUIREMENTS ON COMPOSITE COMPONENTS out out
AIPS05-04-003 COSMETIC REWORK BY COLD CURE ADHESIVE out out
AIPS05-04-004 APPLICATION OF MELTABLE CORROSION PREVENTIVE COMPOUND out out
AIPS05-04-005 APPLICATION OF GAP FILLER - EASY TO REMOVE ASA AC7135 & AC7135/1
AIPS05-04-006 APPLICATION OF FILLER ASA AC7135 & AC7135/1
AIPS05-04-007 APPLICATION OF FINE LAYERS out out
AIPS05-05-001 SEALING OF AIRCRAFT STRUCTURE ASA AC7135 & AC7135/4
AIPS05-05-003 SURFACE PROTECTION OF FASTENERS AND SEALANTS BY APPLICATION OF VARNISH ASA AC7135 & AC7135/4
AIPS05-05-004 WET INSTALLATION OF FASTENERS ASA AC7135 & AC7135/4
AIPS05-05-005 PROCESS FOR THE MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT out out
AIPS05-05-006 APPLICATION OF NON HARDENING JOINTING COMPOUNDS ASA AC7135 & AC7135/4
AIPS05-05-007 APPLICATION OF SEALANT IMPREGNATED FOAM ASA AC7135 & AC7135/4
AIPS05-05-008 APPLICATION OF LOW ADHESION SEALANTS ASA AC7135 & AC7135/4
AIPS05-05-009 PRESERVATION OF CUT EDGES OF CARBON FIBRE COMPOSITE PARTS TO PREVENT GALVANIC CORROSION ON out out
AIPS05-05-010 ATTACHED METAL PARTS SEALANTS FOR INTERIOR APPLICATION
USE OF SILICONE-BASED out out
AIPS05-06-001 APPLICATION OF DECORATIVE FILMS FOR AIRCRAFT EXTERIOR out out
AIPS05-07-001 APPLICATION OF FIRE PROTECTION COATINGS out out
AIPS06-01-002 SURFACE PREPARATION FOR THERMOPLASTIC COMPOSITES BEFORE STRUCTURAL BONDING out out
AIPS06-01-003 SURFACE PREPARATION FOR THERMOSETTING PARTS BEFORE STRUCTURAL BONDING COMP AC7118
AIPS06-01-004 MECHANICAL SURFACE PREPARATION OF NON-STRUCTURAL ADHERENDS PRIOR TO ADHESIVE BONDING out out
AIPS06-01-005 ETCHING OF POLYAMIDE ADHERENDS PRIOR TO ADHESIVE BONDING out out
AIPS06-01-006 PRIMING OF POLYAMIDE ADHERENDS PRIOR TO ADHESIVE BONDING out out
AIPS06-01-007 ETCHING OF FLUOROPOLYMER ADHERENDS PRIOR TO ADHESIVE BONDING out out
AIPS06-01-008 SURFACE PREPARATION OFL ADHERENDS FOR SILICONE BASED AHESIVES & SEALANTS out out
AIPS06-01-009 SURFACE PREPARATION OF POLYETHERETHERKETONE (PEEK) PRIOR TO ADHESIVE BONDING VIA LOW out out
AIPS06-02-002 PRESSURE PLASMAADHESIVE
NON-STRUCTURAL TECHNIQUE
BONDING out out
AIPS06-02-003 BONDING OF GLARE® PARTS STRUCTURAL BONDING OF FIBER METAL LAMINATES (FML) out out
AIPS06-02-005 MANUFACTURING OF METALLIC SANDWICH PARTS - BONDING PROCESS COMP AC7118 MB
AIPS06-02-006 STRUCTURAL BONDING OF THERMOSET AND THERMOPLASTIC MATRICES COMPOSITE PARTS COMP AC7118 PAR
AIPS06-02-007 BONDING METAL & METAL PARTS STRUCTURAL BONDING PROCESS COMP AC7118 MB
AIPS06-02-008 BONDING OF ACOUSTIC SKIN ON HONEYCOMB WITH RETICULATED ADHESIVE out out
AIPS06-02-009 ADHESIVE TAPE BONDING out out
AIPS07-00-001 APPROVED INTERCHANGABLE STANDARD PARTS FOR ELECTRICAL COMPONENTS out out
AIPS07-00-002 CATALOGUE OF ELECTRICAL AIPS out out
AIPS07-01-001 MANUFACTURING AND INSTALLATION OF CABLE HARNESSES out out
AIPS07-01-002 GENERAL REQUIREMENTS FOR THE INSERTION AND EXTRACTION OF REMOVABLE CONTACTS IN ELECTRICAL out out
AIPS07-01-003 CONNECTING SYSTEMS
CABLE TYING WITH NSA935401 OR NSA8420 out out
AIPS07-01-004 TIGHTENING PROCEDURES FOR ELECTRICAL EQUIPMENT out out
AIPS07-01-005 TERMINATION OF UNWIRED SHIELDED CABLES out out
AIPS07-01-006 ELECTRICAL BONDING ASA AC7135 & AC7135/2
AIPS07-01-007 SHIELDING PICK-UP WITH SOLDER SLEEVES ASNE0160 AND ABS0237 out out
AIPS07-01-009 ATTACHMENT OF CABLES IN BACKSHELLS OF CONNECTORS out out
AIPS07-01-011 LIGHTNING PROTECTION FOR ELECTRICAL CABLES out out
AIPS07-01-012 SHIELDED OVERBRAIDING OF ELECTRICAL HARNESSES FOR A340-500/600 PROGRAM out out
AIPS07-01-013 SHIELDED OVER BRAIDING OF ELECTRICAL HARNESSES DEVELOPED FOR A380 PROGRAM out out
AIPS07-01-014 SHIELDED LIGHTWEIGHT CONDUITS, MANUFACTURING AND PRODUCTION ASSEMBLY INSTRUCTIONS, FOR out out
AIPS07-01-015 ELECTRICAL CABLE
MODIFICATION HARNESSES.
AND REPAIR OF HARNESS PROTECTION COMPONENTS out out
AIPS07-01-017 ASSEMBLY PROCESS OF ADHESIVE BONDED BRACKETS ASA AC7135 & AC7135/1
AIPS07-01-018 ASSEMBLY OF A COAXIAL CABLE XF ON TWO DR24 CABLES, USING SOLDER SLEEVE E0160 AND SPLICE E0541 out out
AIPS07-01-021 EDS SAPHIR BUS DERIVATION SOLUTION USING KD24 CABLE AND SPLICES ASNE0541 FOR A400M PROGRAM out out
AIPS07-01-022 INSTALLATION OF ESN FLEXIBLE JUNCTIONS AND RACEWAYS ASA AC7135 & AC7135/2
AIPS07-01-023 BONDING OF INDIVIDUAL CABLE SHIELDS out out
AIPS07-01-024 INSTALLATION, REPAIR AND MAINTENANCE OF RACEWAYS IN WINGS ASA AC7135 & AC7135/1
AIPS07-02-001 EXIGENCES GÉNÉRALES RELATIVES AU DÉNUDAGE DES CÂBLES ÉLECTRIQUES out out
AIPS07-02-002 PREPARATION OF SPECIAL CABLE ENDS out out
AIPS07-02-005 INSTALLATION OF COAXIAL CONNECTOR ASNE 0294 out out
AIPS07-02-006 INSTALLATION OF CONNECTOR NSA 938925 out out
AIPS07-02-008 INSTALLATION OF CONNECTORS ASNE 0111 AND ASNE 0233 out out
AIPS07-02-009 GENERAL REQUIREMENTS FOR THE STRIPPING OF ELECTRICAL SINGLE CONDUCTOR CABLES DR AND AD SERIES out out
AIPS07-03-001 GENERAL REQUIREMENTS FOR CRIMPING OF ELECTRIC CONNECTIONS out out
AIPS07-03-002 CRIMPING PROCEDURE WITH MANUAL AND HYDRAULIC TOOLS AND WITH PRESSURE GENERATOR out out
AIPS07-03-003 PRINCIPLE OF USE OF MANUAL CRIMPING TOOLS M22520/1-01 REPLACING MS 3191 M22520/2-01 REPLACING MS out out
AIPS07-04-001 3198 M22520/7-01
GENERAL M22520/5-01
REQUIREMENTS FORM22520/10-01
CRIMPING OF CABLE TERMINATION out out
AIPS07-04-002 INSTALLATION OF SOCKET CONTACTS FOR RELAY BASES out out
AIPS07-04-003 INSTALLATION OF TERMINALS NSA 936501TA out out
AIPS07-04-004 INSTALLATION OF SPLICES NSA 936809 out out
AIPS07-04-005 INSTALLATION OF TERMINALS NSA936507TG out out
AIPS07-04-006 INSTALLATION OF BUTT SPLICES ASNE 0360 out out
AIPS07-04-007 INSTALLATION OF CAPS NSA 936601 AND NSA 936604 out out
AIPS07-04-009 INSTALLATION OF TERMINAL ASNE 0422 TR ONTO ALUMINIUM CABLE out out
AIPS07-04-010 INSTALLATION OF TERMINAL ASNE 0466 TS ONTO ALUMINIUM CABLE out out
AIPS07-04-011 INSTALLATION OF SPLICE, BUTT TYPE, NSA 936813RH ON ALUMINIUM/ALUMINIUM OR COPPER & ALUMINIUM out out
AIPS07-04-012 CABLES
INSTALLATION OF TERMINALS ASNE 0223 TL FOR ALUMINIUM CABLE out out
AIPS07-04-013 INSTALLATION OF CONTACTS out out
AIPS07-04-014 INSTALLATION OF PIN CONTACTS out out
AIPS07-04-015 INSTALLATION OF FLAT TERMINALS ASNE0256 out out
AIPS07-04-016 INSTALLATION OF EYE TERMINALS NSA 936505 out out
AIPS07-04-017 INSTALLATION OF FLAT TERMINALS ABS 0374 out out
AIPS07-04-019 INSTALLATION OF FLAT TERMINALS ABS 0909 out out
AIPS07-04-021 INSTALLATION OF EYE TERMINALS NSA 936503 TD out out
AIPS07-04-022 INSTALLATION OF TERMINALS NSA936504TC out out
AIPS07-04-023 GENERAL REQUIREMENTS FOR THE CRIMPING OF 24 TO 12 SIZE ALUMINIUM ELECTRICAL CABLES ABS0949 ( AD out out
AIPS07-04-024 SERIES ) ONTO
GENERAL CONTACTS ABS1380
REQUIREMENTS FOR THE AND ABS1381
CRIMPING OF 10 TO 04 SIZE ALUMINIUM ELECTRICAL CABLES ABS0949 AD out out
AIPS07-04-026 SERIES ONTO CONTACTS
MANUFACTURING ABS1380
OF BONDING AND
LEAD ABS1381 ASNE0088/0089/0090/0091/0092 AND ABS0394, ABS1509,
ASSEMBLIES out out
AIPS07-04-027 ABS1510
EXIGENCES GÉNÉRALES RELATIVES AU SERTISSAGE DES CÂBLES CUIVRE DE JAUGES 04 À 12 SUR DES out out
AIPS07-04-028 CONTACTS ABS1344
INSTALLATION ET ABS1403
OF TWINAX CONTACTS ABS1111 AND ABS1112 out out
AIPS07-04-030 INSTALLATION DES RACCORDS BOUT À BOUT ASNE0541 out out
AIPS07-04-031 GENERAL REQUIREMENTS FOR THE CRIMPING OF 24 TO 12 SIZE ALUMINIUM ELECTRICAL CABLES ABS0949 (AD out out
AIPS07-04-032 SERIES) ONTO OF
INSTALLATION CONTACTS
MIL BUS ABS1380 AND ABS1381
1553 STANDARD WITH MULTI-GAUGES CRIMPING TOOLS
COMPONENTS out out
AIPS07-04-036 EXIGENCES GÉNÉRALES RELATIVES AU SERTISSAGE D'UNE TERMINAISON DE CÂBLE out out
AIPS07-04-037 MANUFACTURING OF TRIAXIAL CONTACTS out out
AIPS07-05-002 INSTALLATION OF RECTANGULAR RACK CONNECTORS ASNE 0086 & ASNE 0145 & ASNE 0146 & ASNE 0147 out out
AIPS07-05-003 INSTALLATION OF RACK CONNECTORS out out
AIPS07-05-004 INSTALLATION OF GROUNDING MODULES ASNE 0425 out out
AIPS07-05-005 ASSEMBLY AND CONNECTION OF RAIL MOUNTED TERMINAL MODULES NSA937901 out out
AIPS07-05-006 INSTALLATION OF RECTANGULAR CONNECTORS ASNE 0390 OR EN 3545 out out
AIPS07-05-007 INSTALLATION OF SEAL BUNDLE NSA 934710 out out
AIPS07-05-008 INSTALLATION OF INDICATOR LIGHTS ASNE 0415 IN SLEEVES ASNE 0416 out out
AIPS07-05-009 INSTALLATION OF BASE FITTED INDICATOR LIGHTS out out
AIPS07-05-010 INSTALLATION OF CONNECTORS out out
AIPS07-05-011 INSTALLATION OF CONNECTORS EN 6047-003/004 (ASNE0098 AND ASNE 0378) AND CONTACTS EN 3155-052M4A2A out out
AIPS07-05-012 INSTALLATION OF COAXIAL CONNECTOR "BNC" TYPE NSA 938601 out out
AIPS07-05-013 INSTALLATION OF COAXIAL CONNECTOR "TNC" TYPE NSA 938621 out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 14
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPS07-05-014 INSTALLATION OF COAXIAL CONNECTOR N TYPE NSA 938641 out out
AIPS07-05-015 INSTALLATION OF COAXIAL CONNECTOR C TYPE NSA 938661 out out
AIPS07-05-016 INSTALLATION OF "BNC" TYPE COAXIAL CONNECTORS ASNE 0460 out out
AIPS07-05-017 INSTALLATION OF "TNC" TYPE COAXIAL CONNECTORS ASNE 0461 out out
AIPS07-05-018 INSTALLATION OF "N" TYPE COAXIAL CONNECTORS ASNE 0462 out out
AIPS07-05-019 INSTALLATION OF "C" TYPE COAXIAL CONNECTORS ASNE 0463 out out
AIPS07-05-020 INSTALLATION OF COAXIAL CONNECTOR ASNE 0295 AND GROUNDING WITH TERMINAL ASNE 0296 out out
AIPS07-05-021 INSTALLATION OF CONNECTORS ASNE 0077 ASNE 0079 ASNE 0110 out out
AIPS07-05-022 INSTALLATION OF CONNECTORS: ASNE 0684 (REPLACINGNSA 938027), ASNE 0734 (REPLACING NSA 938028) AND out out
AIPS07-05-023 NSA 938026
INSTALLATION OF ELECTRICAL CONNECTORS ASNE 0093 AND ASNE 0094 out out
AIPS07-05-024 INSTALLATION OF CONNECTORS ASNE 0076 ASNE 0150 out out
AIPS07-05-025 INSTALLATION OF PLUG CONNECTOR ASNE 0511 out out
AIPS07-05-026 INSTALLATION OF CONNECTORS ABS 0364 out out
AIPS07-05-027 INSTALLATION OF CONNECTORS out out
AIPS07-05-028 INSTALLATION OF DIODES AND RESISTORS ON CONNECTOR NSA 938361 out out
AIPS07-05-029 INSTALLATION OF CONNECTORS NSA 938361 AND ASNE 0362 out out
AIPS07-05-030 INSTALLATION OF CONNECTORS ASNE 0087 AND ASNE 0097 out out
AIPS07-05-032 INSTALLATION OF CONNECTORS EN 2997 out out
AIPS07-05-033 INSTALLATION OF FEMALE CONTACTSW ASNE 0078 out out
AIPS07-05-034 INSTALLATION OF RECTANGULAR CONNECTOR ASNE 0237 AND ASNE 0302 out out
AIPS07-05-035 INSTALLATION OF COAXIAL CONNECTORS NSA 938603, NSA 938604, NSA 938608 out out
AIPS07-05-038 INSTALLATION OF COAXIAL SPECIAL CONTACT ABS 0714 NSA 938171 AND NSA 938400 ASNE 0172 AND ASNE 0173 out out
AIPS07-05-039 ASNE 0172 ANDOF
INSTALLATION ASNE 0173 ASNE
PRESSURE 0178ASNE0073
SEALS ASNE 0201 ASNE 0305 ASNE 0375 M 39029/54-342 M39029/55-344 out out
AIPS07-05-040 INSTALLATION OF PRESSURE SEALS ABS 0122 out out
AIPS07-05-041 INSTALLATION OF CONNECTORS D-SUBMINIATURE ABS 0713 AND ABS 1145 out out
AIPS07-05-042 INSTALLATION OF CABLE BRACKETS AND SUPPORTS out out
AIPS07-05-043 INSTALLATION OF QUADRAX CONTACTS ABS0973 AND ABS0974 out out
AIPS07-05-045 INSTALLATION OF CONDUCTIVE BACKSHELL FOR D-SUB MINIATURE CONNECTOR, ABS1069 out out
AIPS07-05-046 ASSEMBLY PROCESS OF PRESSURE SEAL ABS1378 out out
AIPS07-05-047 FITTING OF METALLIC CLAMP STRIPS ASNE0805 out out
AIPS07-05-048 INSTALLATION OF GROUND POWER RECEPTACLE ABS1336 AND ASNE0232 out out
AIPS07-05-050 ASSEMBLY AND CONNECTION OF TERMINAL BLOCKS out out
AIPS07-05-051 GENERAL REQUIREMENTS FOR INSTALLATION OF COMPONENTS FOR BUS CAN out out
AIPS07-05-052 INSTALLATION OF BATTERY CONNECTORS out out
AIPS07-05-053 INSTALLATION OF QUICK-RELEASE-CONNECTOR ABS1152 out out
AIPS07-05-054 INSTALLATION OF ABS 1138 EMI-BACKSHELLS out out
AIPS07-05-056 INSTALLATION OF EXIT-SIGN-CONNECTOR ABS1239 out out
AIPS07-05-060 INSTALLATION D'UN MODULE DE MISE À LA MASSE POUR CONNECTEUR ARINC 600 TAILLE 2 ET TAILLE 3 (ABS1575) out out
AIPS07-05-062 ASSEMBLY PROCESS FOR PRESSURE SEALS ABS1571 out out
AIPS07-05-064 INSTALLATION OF SERVICING CONNECTORS out out
AIPS07-05-065 INSTALLATION DU BOUTON-POUSSOIR LUMINEUX DEL (DIODE ÉLECTROLUMINESCENTE) out out
AIPS07-05-067 ASSEMBLY PROCESS FOR COAXIAL CONNECTOR SMA TYPE ABS1611 out out
AIPS07-05-070 INSTALLATION OF SEALED LED LIGHT INDICATOR ABS1436 out out
AIPS07-05-072 INSTALLATION OF LED ILLUMINATED PUSHBUTTON SWITCHES out out
AIPS07-05-074 INSTALLATION PROCESS ASSEMBLY OF TELEPHONE JACKS AND AUDIO CONNECTORS out out
AIPS07-05-076 INSTALLATION OF COUPLER MIL BUS 1553 FOR FLIGHT CONTROL SYSTEM out out
AIPS07-05-078 COAXIAL CONNECTORS WITH CLAMP TECHNOLOGY (CONNECTION WITHOUT CRIMPING) out out
AIPS07-05-079 INSTALLATION OF MODULAR CONNECTORS out out
AIPS07-06-001 LASER CABLE MARKING WITH UV OR CO 2 PROCESS out out
AIPS07-06-002 IDENTIFICATION AND MARKING OF ELECTRICAL INSTALLATIONS out out
AIPS07-06-003 PRINTING ON ELECTRICAL CABLES BY HOT STAMPING out out
AIPS07-06-004 SLEEVES NSA937201, LABELS ASNE0248 AND ASNE0470 out out
AIPS07-06-006 INSTALLATION OF PRE-PRINTED SELF-ADHESIVE INDEX STRIPS TO CIRCUIT BREAKER PANELS out out
AIPS07-06-007 INSTALLATION AND PROTECTION OF ABS0724, NSA9117 AND ABS0970 LABELS. out out
AIPS07-07-001 INSTALLATION OF HEAT SHRINK TUBING AND SLEEVES out out
AIPS07-07-002 FLEXIBLE TEXTILE SHEATHS EN6049-003 TO EN6049-009, ASNE0559 AND ABS0596 FOR PROTECTION OF out out
AIPS07-07-004 ELECTRICAL
DRAINAGE OFCABLES
CONDUITS NSA935805, NSA935806, ASNE0432 AND ABS0887 out out
AIPS07-07-005 INSTALLATION OF WRAP AROUND ELECTRICAL SLEEVING EMI PROTECTION EN4674-003 AND EN4674-004 out out
AIPS07-07-006 MODIFICATION AND REPAIR PROCEDURE FOR HARNESS OPEN CONDUIT PROTECTION out out
AIPS07-08-003 TOLERANCES APPLICABLES AUX INSTALATION ELECTRIQUES out out
AIPS07-08-004 REPAIR OF ELECTRICAL CABLES out out
AIPS07-08-005 CLEANING OF ELECTRICAL COMPONENTS out out
AIPS07-08-006 ALLOWED TOLERANCES ON ELECTRICAL INSTALLATIONS FOR A350 PROGRAM out out
AIPS07-09-002 ELECTRICAL AND OPTICAL TESTS OF AIRCRAFT WIRING ( FUNCTIONAL TESTS EXCLUDED ) out out
AIPS07-10-001 BRAZING OF ELECTRICAL CONNECTIONS out out
AIPS07-11-001 MANUFACTURING AND INSTALLATION OF OPTICAL FIBRE CABLES out out
AIPS07-11-002 TERMINATION OF ABS0929-003 AND ABS0929-004 SINGLEWAY OPTICAL CONNECTOR ONTO ABSO963-003LF out out
AIPS07-11-003 OPTICAL CABLE
INSTALLATION OF ABS1379-003 OPTICAL CONTACT out out
AIPS07-11-004 ASSEMBLY OF ABS1906 OPTICAL CONTACT ON ABS0963 TYPE LF OPTICAL CABLE out out
AIPS07-11-005 TESTING OF OPTICAL LINKS AFTER CONTACT TERMINATION out out
AIPS07-11-006 FIBRE OPTIC TECHNOLOGY ¿ CLEANING METHODS out out
AIPS07-11-007 FIBRE OPTIC INSTALLATIONS ¿ FAULT DIAGNOSIS out out
AIPS07-11-008 FIBRE OPTIC INSTALLATION - ON-AIRCRAFT REPAIR AND TERMINATIONTECHNIQUES out out
AIPS08-01-001 MARQUAGE PAR FRAPPE CONTROLEE out out
AIPS08-01-002 MARKING BY VIBRO-ENGRAVING out out
AIPS08-01-003 MARQUAGE A LA FRAPPE CONTROLEE out out
AIPS08-01-006 MARKING OF METALLIC MATERIALS BY MICRO MILLING out out
AIPS08-02-002 INSTALLATION OF IDENTIFICATION LABELS IN HYDRAULIC FLUID AREAS ASA AC7135
AIPS08-02-003 IDENTIFICATION BY BAG AND TAG out out
AIPS08-02-004 PRINTING AND INSTALLATION OF THERMAL ACTIVATED IDENTIFICATION TAPES ABS0652 AND ABS0653 out out
AIPS08-02-005 MARKING FOR EXTERNAL AIRCRAFT SURFACES out out
AIPS08-02-006 MANUFACTURING AND MARKING OF LABELS out out
AIPS08-02-007 INSTALLATION OF IDENTIFICATION LABELS ON NON-HYDRAULIC PIPE CIRCUITS out out
AIPS08-03-001 ELECTROCHEMICAL MARKING out out
AIPS08-03-002 PERMANENT MARKING WITH INK out out
AIPS08-04-001 CO2 LASER MARKING OF HARD METALLIC PARTS (TITANIUM AND TITANIUM ALLOYS, STEELS AN INCONEL 625) out out
AIPS08-04-005 LASER BEAM MARKING OF HARD METALS NM - Not mandated AC7116 & AC7116/5
AIPS09-01-001 CLEANING WITH LIQUID NON AQUEOUS AGENTS IN VAPOUR PHASE CP AC7108
AIPS09-01-002 CLEANING WITH LIQUID NON AQUEOUS AGENTS CP AC7108
AIPS09-01-003 CLEANING WITH AQUEOUS CLEANING AGENTS CP AC7108
AIPS09-01-006 CLEANING OF AIRCRAFT COCKPITS AND CABIN INTERIORS out out
AIPS09-01-007 CLEANING OF AIRCRAFT STRUCTURAL PLASTIC TRANSPARENCIES out out
AIPS09-01-008 ULTRASONI DEGREASING CP AC7108
AIPS09-01-009 EMULSION CLEANING CP AC7108
AIPS09-01-010 CLEANING OF PIPES WITH LIQUID NON AQUEOUS AGENTS out out
AIPS09-01-011 ALKALINE DEGREASING CP AC7108
AIPS09-01-012 ELECTROLYTIC DEGREASING CP AC7108
AIPS09-01-013 FINAL CLEANING AND DRYING OF METALLIC OXYGEN PIPES, FITTINGS AND OTHER COMPONENTS OF OXYGEN out out
AIPS09-01-014 SYSTEMS
FINAL CLEANING OF HYDRAULIC PIPES out out
AIPS09-01-015 DISINFECTION OF POTABLE WATER SYSTEM out out
AIPS09-02-003 ACID PICKLING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/12
AIPS09-02-004 ALKALINE ETCHING (AL-ALLOYS) CP AC7108
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
AIPS09-02-005 PICKLING OF TITANIUM AND ITS ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
AIPS09-02-006 PICKLING OF STAINLESS STEEL AND NICKEL-CHROMIUM ALLOYS CP AC7108 & AC7108/12
AIPS09-03-001 CHEMICAL MILLING OF ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108 & AC7108/5
AIPS09-03-002 CHEMICAL MILLING OF TITANIUM ALLOYS CP AC7108 & (AC7108/5 or AC7108/2)
AIPS09-04-001 SURFACE PREPARATION PRIOR TO EXTERNAL PAINT APPLICATION CP AC7108
AIPS09-05-001 ACTIVATING OF FRP-SURFACES BY MEANS OF A LASER-TECHNIQUE FOR SUBSEQUENT PAINT APPLICATION out out
AIPS25-02-001 EXTENSOMETRY INSTALLATION FOR TEMPERATURES UP TO 130°C TYPE A BRIDGE: UNIDIRECTIONAL STRAIN out out
AIPS25-02-002 MEASUREMENTS INSTALLATION FOR TEMPERATURES UP TO 130°C TYPE B BRIGE: STRAIN MEASUREMENTS ON
EXTENSOMETRY out out
AIPS25-02-003 TENSION & COMPRESSION
EXTENSOMETRY LOADED
INSTALLATION FORCOMPONENT
TEMPERATURES UP TO 130°C TYPE C BRIDGE: STRAIN MEASUREMENTS ON out out
AIPS25-02-004 BENDING - TORSION
INSTALLATION - SHEAR
OF STRAIN LOADED
GAUGES FORCOMPONENT
TEMPERATURES UP TO 130°C TYPE D BRIDGE: UNIDIRECTIONAL DYNAMIC out out
AIPS25-03-001 STAIN MEASUREMENTS
EXTENSOMETRY INSTALLATION TO 130°C INSIDE COMPOSITE TANK - TYPE A BRIDGE: UNIDIRECTIONAL STRAIN out out
AIPS25-03-002 MEASUREMENT INSTALLATION TO 130°C INSIDE COMPSITE TANK - TYPE B BRIDGE: STRAIN MEASUREMENT ON
EXTENSOMETRY out out
AIPS25-03-003 TENSILE & COMPRESSION LOADED COMPONENT
EXTENSOMETRY INSTALLATION FOR TEMPERATURES UP TO 130°C INSIDE FUEL TANK MAINLY MADE OF out out
COMPOSITE MATERIALS TYPE C BRIDGE: STRAIN MEASUREMENT ON BEND - TORSION - SHEAR LOADED
COMPONENT
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 15
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AIPS25-03-004 EXTENSOMETRY INSTALLATION FOR TEMPERATURES UP TO 130°C INSIDE FUEL TANK MAINLY MADE OF out out
AIPS25-04-001 COMPOSITE MATERIALS
EXTENSOMETRY TYPE DFOR
INSTALLATION INSTALLATIONS: UNIDIRECTIONAL
TEMPERATURES STRAIN
UP TO 280°C TYPE DYNAMICUNIDIRECTIONAL
A BRIDGE: MEASUREMENT STRAIN out out
AIPS25-04-002 MEASUREMENTS
EXTENSOMETRY INSTALLATION FOR TEMPERATURES UP TO 280°C TYPE B BRIGDE: STRAIN MEASUREMENTS ON out out
AIPS25-04-003 TENSILE-COMPRESSION
EXTENSOMETRY LOADED
INSTALLATION COMPONENT
FOR TEMPERATURES UP TO 280°C TYPE C BRIDGE: STRAIN MEASUREMENTS ON out out
AIPS25-04-004 BEND - TORSION -INSTALLATION
EXTENSOMETRY SHEAR LOADED FORCOMPONENT
TEMPERATURES UP TO 280°C TYPE D INSTALLATION: UNIDIRECTIONAL out out
AIPS25-05-001 STRAIN DYNAMIC
INSTALLATION OF MEASUREMENT
TEMPERATURE SENSORS TO MEASURE SURFACE TEMPERATURES IN AERODYNAMICALLY NON out out
AIPS25-05-002 DISTURBED ENVIRONMENTS
INSTALLATION OF TEMPERATURE SENSORS TO MEASURE SURFACE TEMPERATURES IN AERODYNAMICALLY out out
AIPS25-05-003 DISTURBED ENVIRONMENTS
INSTALLATION OF TEMPERATURE(EXCEPT WINDOWS,
SENSORS PLEXIGLAS,
FOR SURFACE COMPOSITE MATERIAL)
TEMPERATURE MEASUREMENTS IN DISTURBED out out
AIPS25-05-004 ENVIRONMENTS
INSTALLATION OF(ON COMPOSITE SENSORS
TEMPERATURE MATERIALS)
FOR SURFACE TEMPERATURE MEASUREMENTS INSIDE FUEL TANKS out out
AIPS25-05-005 (EXCEPT FOR AIRCRAFT
INSTALLATION MAINLY MADE
OF TEMPERATURE OF COMPOSITE
SENSORS MEASURING MATERIALS)
SURFACE TEMPERATURES OF FLEXIBLE OR RIGID out out
AIPS25-05-006 CYLINDRICAL ITEMS
INSTALLATION OF TEMPERAUTE SENSORS FOR FLUID TEMPERATURE MEASUREMENTS IN PIPES out out
AIPS25-05-007 INSTALLATION OF TEMPERATURE SENSORS ON COMMERCIAL FURNISHINGS out out
AIPS25-05-008 INSTALLATION OF SENSORS INSIDE COMPOSITE TANKS TO MEASURE SURFACE TEMPERATURE out out
AIPS25-06-001 INSTALLATION OF RIVETED THERMOCOUPLES FOR SURFACE TEMPERATURE MEASUREMENTS IN out out
AIPS25-06-002 AERODYNAMICALLY
INSTALLATION DISTURBED
OF BONDED ENVIRONMENTS
THERMOCOUPLES FOR SURFACE TERMPERATURE MEASUREMENTS out out
AIPS25-06-003 INSTALLATION OF BONDED THERMOCOUPLES FOR SURCFACE HIGH-TEMPERATURE MEASUREMENTS out out
AIPS25-07-001 INSTALLATION OF ALUMINIUM SUPPORTS (GLOVES) FOR FLUSH MINIATURE SENSORS out out
AIPS25-07-003 INSTALLATION OF FLEXIBLE SUPPORT (PENNYWASHER) FOR FLUSH MINIATURE SENSORS out out
AIPS25-07-004 BONDING OF PRESSURE SENSORS WITH REMOTE SENSITIVE ELEMENT out out
AIPS25-08-001 BONDING OF ACCELEROMETERS AND PROXIMITY SENSORS out out
AIPS25-08-002 BONDING OF HIGH TEMPERATURE ACCELEROMETERS out out
AIPS25-09-001 INSTALLATION OF PACKINGS ON ADAPTERS FOR SENSORS GG39X, GG49X, GG58X, GG59X, GG56X out out
AIPS25-09-002 INSTALLATION OF PNEUMATIC BUNDLE FOR 28-CHANNEL MPS SYSTEM out out
AIPS25-09-003 INSTALLATION OF PNEUMATIC BUNDLE FOR 64-CHANNEL MPS 64 SYSTEM out out
AIPS25-09-004 INSTALLATION OF PNEUMATIC BUNDLE FOR 32-CHANNEL MPS SYSTEM out out
AIPS25-09-005 INSTALLATION OF DOUBLE-BUSH COUPLINGS out out
AIPS25-10-001 INSTALLATION OF FRB CONNECTORS SERIES HKU505/513 out out
AIPS25-10-002 WIRING OF SUB-D CONNECTOR HD 15/NSA935399-413 out out
AIPS25-10-003 ELECTRICAL CONNECTORS NSA938355 AND NSA938998-11 out out
AIPS25-11-001 USE OF CABLE ABS0972 ON NSA938361 AND NSA938998-11K52 out out
AIPS25-12-001 INSTALLATION OF ROTOR TO MEASURE TORQUE ON ROTATING SHAFTS VY TELEMETRY out out
AIPS98-01-001 INSTALLATION OF COUPLING SLEEVE ABS1617 USED FOR REPAIR OF QUADRAX CABLE out out
AIPS98-01-003 ALLOWED TOLERANCES ON ELECTRICAL INSTALLATION out out
AIPS98-02-001 APPLICATION OF PHOSPHORIC ACID ANODIZING (PAA) FOR REPAIRS CP AC7108 & AC7108/8
AIPS98-02-002 REPAIR OF STATIC PORTS out out
AIPS98-02-003 HEAT TREATMENT OF 2024 ALUMINIUM ALLOY RIVETS FOR MAINTENANCE, OVERHAULS AND REPAIR HT AC7102 & AC7102/2
AIPS98-03-001 REPAIR PROCESS FOR ABS0963-003LF OPTICAL FIBRE CABLE BY FUSION SPLICING out out
AITM0-0001 DEFINITION AND PRODECURES FOR MATERIAL HANDBOCK AND AIRBUS INDUSTRIE TEST METHODS out out
AITM0-0002 STRUCTURE AND CONTENT OF TEST METHODS (TM) out out
AITM0-0003 HEAD HEIGHT MEASUREMENT out out
AITM1-0001 FIBER REINFORCED PLASTICS DETERMINATION OF MECHANICAL DEGRADATION DUE TO CHEMICAL PAINT NMMT AC7122 & AC7122/1
AITM1-0002 STRIPPERS
FIBRE REINFORCED PLASTICSDETERMINATION OF IN-PLANE-SHEAR PROPERTIES NMMT AC7122 & AC7122/1
AITM1-0003 DETERMINATION OF THE GLASS TRANSITION TEMPERATURES NMMT AC7122 & AC7122/4
AITM1-0005 FIBRE REINFORCED PLASTICS DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY MODE I NMMT AC7122 & AC7122/1
AITM1-0006 CARBON FIBER REINFORCED PLASTICS DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY NMMT AC7122 & AC7122/1
AITM1-0007 MODE REINFORCED
FIBRE II PLASTICS DETERMINATION OF OPEN HOLE TENSILE STRENGTH NMMT AC7122 & AC7122/1
AITM1-0008 FIBRE REINFORCED PLASTICS DETERMINATION OF PLAIN, OPEN HOLE AND FILLED HOLE COMPRESSION NMMT AC7122 & AC7122/1
AITM1-0009 STRENGTH.
FIBRE REINFORCED PLASTICS DETERMINATION OF BEARING STRENGTH BY EITHER PIN OR BOLT BEARING NMMT AC7122 & AC7122/1
AITM1-0010 CONFIGURATION
FIBRE REINFORCED PLASTICS DETERMINATION OF COMPRESSION STRENGTH AFTER IMPACT NMMT AC7122 & AC7122/1
AITM1-0011 CONSTANT AMPLITUDE FATIGUE TESTING OF METALLIC MATERIALS MTL AC7101 & AC7101/3
AITM1-0012 SHEAR TESTING OF METALLIC MATERIALS WROUGHT PRODUCTS MTL AC7101 & AC7101/3
AITM1-0015 LIQUID CLEANING AGENTS: THE DETERMINATION OF THE LIQUID CLEANING AGENTS UPON THE PEEL STRENGHT out out
AITM1-0016 OF
THEPOLYSULPHIDE
DETERMINATIONSEALANTS
OF THE EFFECT OF LIQUID CLEANING AGENTS UPON THE PEEL STRENGTH OF HEAT CURED out out
AITM1-0017 FILMDETERMINATION
THE ADHESIVE /BONDING PRIMER
OF THE SYSTEMS
EFFECT OF LIQUID CLEANING AGENTS UPON THE ADHESION OF PAINT PRIMERS TO out out
AITM1-0018 ADHESIVE
FIBRE BONDING PLASTIC
REINFORCED PRIMERSSANDWICH FLEXURAL TEST 4-POINT BENDING NMMT AC7122 & AC7122/1
AITM1-0019 DETERMINATION OF TENSILE LAP SHEAR STRENGTH OF COMPOSITE JOINTS NMMT AC7122 & AC7122/1
AITM1-0020 BENDING AT LOW TEMPERATURE out out
AITM1-0021 THE DETERMINATION OF THE EFFECT OF LIQUID CLEANING AGENTS UPON THE PROPERTIES OF ELASTOMERIC out out
AITM1-0022 MATERIALS
WETTABILITY TEST CP AC7108 & AC7108/4
AITM1-0023 ASSESSMENT OF THE INFLUENCE OF EVAPORATED RESIDUES OF AQUEOUS CLEANING AGENTS ON METALLIC out out
AITM1-0024 PARTS
DETERMINATION OF THE COMPLETENESS OF CURE OF ORGANIC COATINGS CP AC7108 & AC7108/4
AITM1-0025 FIBER REINFORCED PLASTICS FLATWISE TENSILE TEST OF COMPOSITE SANDWICH PANEL NMMT AC7122 & AC7122/1
AITM1-0027 RAIN TESTING OF ORGANIC COATINGS FOR THE DETERMINATION OF THE RESISTANCE TO EROSION out out
AITM1-0028 SURFACE TEMPERATURE MEASUREMENT OF SANDWICH PANEL out out
AITM1-0029 DETERMINATION OF TENSILE STRENGTH OF A TAPERED OR STEPPED JOINT NMMT AC7122 & AC7122/1
AITM1-0030 SEALANTS: DETERMINATION OF LAP SHEAR STRENGTH ASA AC7135 & AC7135/4
AITM1-0032 DETERMINATION OF NON HARDENING CHARACTERISTIC OF SEALANT out out
AITM1-0033 SEALANTS: DETERMINATION OF THE CURING RATE OF SEALING MATERIALS ASA AC7135 & AC7135/4
AITM1-0036 SEALANTS DETERMINATION OF ASSEMBLY TIME ASA AC7135 & AC7135/4
AITM1-0038 PRESSURE STRENGTH TEST out out
AITM1-0039 BENCH PRESSURE TESTING OF HYDRAULIC PARTS out out
AITM1-0040 RESIDUAL STRESS MEASUREMENT FOR METALLIC PLATES out out
AITM1-0042 FATIGUE CRACK PROPAGATION ON SHEET MATERIAL MTL AC7101 & AC7101/3
AITM1-0043 R-CURVE ON SHEET MATERIAL MTL AC7101 & AC7101/3
AITM1-0044 DETERMINATION OF THE SLIDING FRICTION BEHAVIOUR out out
AITM1-0045 TEMPORARY PROTECTIVES - PENETRATION TEST out out
AITM1-0047 TEST METHOD FOR THE DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH OF FIBRE METAL NMMT AC7122 & AC7122/1
AITM1-0048 LAMINATES
COMPRESSION TEST METHOD FOR FIBRE METAL LAMINATES NMMT AC7122 & AC7122/1
AITM1-0049 TENSILE TEST METHOD FOR FIBRE METAL LAMINATES NMMT AC7122 & AC7122/1
AITM1-0050 TEST METHOD FOR THE DETERMINATION OF BLUNT NOTCH OPEN AND FILLED HOLE TENSILE STRENGTH OF FIBRE NMMT AC7122 & AC7122/1
AITM1-0051 METAL LAMINATES
FIBRE METAL LAMINATES - DETERMINATION OF BEARING STRENGTH NMMT AC7122 & AC7122/1
AITM1-0052 DETERMINATION OF FLIGHTDECK PENETRATION RESISTANCE out out
AITM1-0053 CARBON FIBRE REINFORCED PLASTICS DETERMINATION OF FRACTURE TOUGHNESS ENERGY OF BONDED JOINTS NMMT AC7122 & AC7122/1
AITM1-0054 MODE I G1C
DETERMINATION OF ORANGE PEEL CP AC7108 & AC7108/4
AITM1-0055 INTERLAMINARE PEEL RESISTANCE out out
AITM1-0056 VERTICAL INSERT SHEAR out out
AITM1-0057 IMPACT RESISTANCE OF LAMINATE AND SANDWICH out out
AITM1-0058 MOBILE HARDNESS TESTING MTL AC7101 & AC7101/5
AITM1-0059 IN-PLANE-SHEAR TEST ON FIBRE METAL LAMINATES NMMT AC7122 & AC7122/1
AITM1-0060 T-TYPE TENSILE TEST ON WELDED JOINTS MTL AC7101 & AC7101/3
AITM1-0061 DETERMINATION OF THE NODAL ADHESIVE FORCE ON HEXAGONAL HONEYCOMB CORES BASED ON POLYAMIDE out out
AITM1-0062 PAPER, PHENOL RESIN
DETERMINATION IMPREGNATED
OF TRANSVERSAL CONTRACTION ON HEXAGONAL HONEYCOMB CORES BASED ON POLYAMID out out
AITM1-0063 PAPER, PHENOL RESIN
DETERMINATION IMPREGNATED
OF WEAR BEHAVIOR AND COEFFICIENT OF FRICTION ON PLAIN BODIES out out
AITM1-0064 BUTT WELDING OF ALUMINIUM ALLOYS - BEND TEST MTL AC7101 & AC7101/3
AITM1-0065 FIBER REINFORCED PLASTICS DETERMINATION OF JOINT STRENGTH OF MECHANICALLY FASTENED JOINTS NMMT AC7122 & AC7122/1
AITM1-0066 FIBRE REINFORCED PLASTICS - DETERMINATION OF PULL-OUT/ PULL-THROUGH STRENGTH ON RIVETED JOINTS NMMT AC7122 & AC7122/1
AITM1-0067 DETERMINATION OF TENSION THROUGH THE HOLE STRENGTH ON FASTENED JOINTS NMMT AC7122 & AC7122/1
AITM1-0068 DETERMINATION OF FRACTURE TOUGHNESS ENERGY OF BONDED JOINTS & MODE II & G2C-TEST out out
AITM1-0069 FIBRE REINFORCED PLASTICS DETERMINATION OF CURVED-BEAM FAILURE LOAD NMMT AC7122 & AC7122/1
AITM1-0070 SURFACE ROUGHNESS MEASUREMENTS USING SURFACE STYLUS METHODS out out
AITM1-0071 SLIDING WEAR TEST out out
AITM1-0072 CARBON FIBER REINFORCED PLASTICS, DETERMINATION OF FRACTURE TOUGHNESS ENERGY OF BONDED out out
AITM1-0073 JOINTS
FATIGUEAT
OFVARIOUSMODE I TO MODE
PLATES IN METALLIC II LOADING
BOLTED JOINTSRATIOS (MIXED MODE BENDING TEST) out out
AITM1-0074 FIBER REINFORCED PLATICS- FATIGUE OF FASTENERS UNDER CONSTANT AMPLITUDE LOADING IN CARBON out out
AITM2-0001 REINFORCED PLASTICS
DETERMINATION OF THEAND HYBRID JOINTS
EXOTHERMIC REACTION DURING CURING OF PREPREGMATERIALS NMMT AC7122 & AC7122/4
AITM2-0002 RESISTANCE OF MATERIALS WHEN TESTED ACCORDING TO THE 12 S OR 60 S VERTICAL BUNSEN BURNER TEST NMMT AC7122 & AC7122/5
AITM2-0003 RESISTANCE OF MATERIALS WHEN TESTED ACCORDING TO THE 15S HORIZONTAL BUNSEN BURNER TEST NMMT AC7122 & AC7122/5
AITM2-0004 FLAMMABILITY OF NOMMETALLIC MATERIALS - SMALL BURNER TEST, 45° - NMMT AC7122 & AC7122/5
AITM2-0005 FLAMMABILITY OF NONMETALLIC MATERIALS - SMALL BURNER TEST, 60° - NMMT AC7122 & AC7122/5
AITM2-0006 DETERMINATION OF HEAT RELEASE AND HEAT RELEASE RATE OF AIRCRAFT MATERIALS out out
AITM2-0007 DETERMINATION OF THE SPECIFIC OPTICAL SMOKE DENSITY OF COMPONENT PARTS OR SUB-ASSEMBLIES OF out out
AITM2-0008 AIRCRAFT INTERIOR
DETERMINATION OF THE OPTICAL SMOKE DENSITY OF ELECTRICAL AND NON-ELECTRICAL CABLE out out
AITM2-0009 FIRE RESISTANCE OF AIRCRAFT SEAT CUSHION UTILIZING A HIGH INTENSITY OPEN FLAME out out
AITM2-0010 FIRE RESISTANCE OF AIRCRAFT CARGO COMPARTMENT LINING MATERIALS UTILIZING A HIGH INTENSITY OPEN out out
AITM2-0011 FLAME
AIRBUS INDUSTRIE TEST METHOD DRYING TIME out out
AITM2-0012 DETERMINATION OF PERMEABILITY CP AC7108 & AC7108/4
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 16
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AITM2-0013 DETERMINATION OF SEALANT ADHESION BY LINEAR DEBONDING TEST out out
AITM2-0014 DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE out out
AITM2-0016 DETERMINATION OF THE EFFECT OF THERMAL CYCLING out out
AITM2-0018 SOLAR ABSORPTION OF PAINTS out out
AITM2-0020 DETERMINATION OF SEDIMENTATION RATING out out
AITM2-0024 DETERMINATION OF ADHESION BY WET TAPE TESTING CP AC7108 & AC7108/4
AITM2-0026 DETERMINATION OF THE EVAPORATION INDEX OF NON AQUEOUS LIQUIDS out out
AITM2-0027 DETERMINATION OF COLOUR DIFFERENCES CP AC7108 & AC7108/4
AITM2-0031 DETERMINATION OF ELECTRICAL RESISTIVITY BY OHMIC METHOD out out
AITM2-0033 SEALANTS: DETERMINATION OF SLUMP ASA AC7135 & AC7135/4
AITM2-0034 SEALANTS: DETERMINATION OF TACK-FREE TIME OF SEALING MATERIALS ASA AC7135 & AC7135/4
AITM2-0035 SEALANTS, DETERMINATION OF SHRINKAGE ASA AC7135 & AC7135/4
AITM2-0037 FLUID TIGHTNESS TEST FOR SANDWICH SPECIMENS AND STRUCTURES out out
AITM2-0038 FLAMMABILTY OF NONMETALLIC HEAT SHRINKABLE TUBINGS - SMALL BURNER TEST, 60° - out out
AITM2-0039 DETERMINATION OF ELECTRICAL RESISTANCE OF PAINTS USING THE CORAS INSTRUMENT out out
AITM2-0040 PAINT ADHESION ON FASTENDER HEADS out out
AITM2-0041 DEFORMATION UNDER PRESSURE OF TUBES: STANDARD TO BE USED: DIN 9370 TUBES, CLASSIFICATION out out
AITM2-0043 ACCORDING TO APPLICATION,
DETERMINATION PRESSURE
OF FORMALDEHYDE TERMS,
STEADY CALCULATION
STATE AND DESIGN
CONCENTRATION CRITERIA
IN PHENOLIC FORMALDEHYDE PREPREG out out
AITM2-0044 IN A 1 M³ CHAMBER
FLAMMABILITY OF INSULATION BLANKETS COTTON SWAB TEST DETERMINATION OF THE FLAME PROPAGATION out out
AITM2-0045 DRY BLASTING OF SEALS FOR THE DETERMINATION OF THE EROSION RESISTANT out out
AITM2-0046 TEMPORARY PROTECTIVES -DETERMINATION OF TACK out out
AITM2-0047 TEMPORARY PROTECTIVES - FLAMMABILITY out out
AITM2-0048 TEMPORARY PROTECTIVES - RE-WASHING EFFECT out out
AITM2-0049 TEMPORARY PROTECTIVES - FREEDOM FROM SAGGING out out
AITM2-0050 TEMPORARY PROTECTIVES - FREEDOM FROM FLOW out out
AITM2-0051 SEALS-AERODYNAMIC PRESSURE TEST out out
AITM2-0053 DETERMINATION OF FLAMMABILITY AND FLAME PROPAGATION OF THERMAL/ACOUSTIC INSULATION MATERIALS - out out
AITM2-0055 RADIANT PANEL
NSA307110 TEST FLUID MONITORING PRIOR TO AIRCRAFT DELIVERY
HYDRAULIC out out
AITM2-0056 DETERMINATION OF BURN THROUGH RESISTANCE CHARACTERISTICS OF THERMAL/ACOUSTIC INSULATION out out
AITM2-0057 MATERIALS
CHARACTERISATION OF THE RADIOELECTRIC PROPERTIES OF PAINTS out out
AITM2-0058 CONTACT ANGLES MEASUREMENTS FOR SURFACE WETTABILITY EVALUATION out out
AITM2-0059 THICKNESS MEASUREMENT BY ROTATIVE ABRASION out out
AITM2-0060 DETERMINATION OF THE ELECTRICAL CONDUCTIVITY OF FASTENERS AND FASTENED ASSEMBLIES out out
AITM2-0061 WATER PICK UP TEST - METHOD TO DETERMINE THE IMPREGNATION LEVEL OF PREPREG MATERIALS out out
AITM2-0062 DETERMINATION OF DEBULKING AND PREFORMING CHARACTERISTICS OF DRY CARBON FIBRE SEMI-FINISHED out out
AITM2-0063 PRODUCTS
TEST METHOD FOR DETERMINING THE REMOVEABILITY OF A GAP FILLER out out
AITM2-0064 ELECTRICAL RESISTANCE FOR A COMPOSITE LAMINATE WITH CARBON FIBRE: MEASUREMENT ALONG X OR Y out out
AITM2-0065 DIRECTION RESISTANCE FOR A COMPOSITE LAMINATE WITH CARBON FIBRE: MEASUREMENT ALONG Z
ELECTRICAL out out
AITM2-0066 DIRECTION
ADHESION TEST FOR THIN AND HARD FILMS out out
AITM2-0067 METALLIC SCREEN FOR LIGHTNING STRIKE PROTECTION: MEASUREMENT OF ITS ELECTRICAL RESISTANCE out out
AITM2-0068 CORROSION PREVENTION COMPOUNDS - RESISTANCE AND PERFORMANCE TEST USING THE QCT METHOD out out
AITM3-0001 ANALYSIS OF THERMOSET SYSTEMS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHIE NMMT AC7122 & AC7122/3
AITM3-0002 ANALYSIS OF NON METALLIC MATERIALS (UNCURED) BY DIFFERENTIAL SCANNING CALORIMETRY NMMT AC7122 & AC7122/4
AITM3-0003 ANALYSIS OF ORGANIC COMPOUNDS BY INFRARED SPECTROSCOPY NMMT AC7122 & AC7122/3
AITM3-0004 DETERMINATION OF GEL TIME AND VISCOSITY NMMT AC7122 & AC7122/2
AITM3-0005 DETERMINATION OF SPECIFIC GAS COMPONENTS OF SMOKE GENERATED BY COMPONENT PARTS OR SUB- out out
AITM3-0006 ASSEMBLIES OF AIRCRAFT
FIBER REINFORCED INTERIOR
PLASTICS DETERMINATION OF MATERIAL DEGRADATION DUE TO CHEMICAL PRODUCTS out out
AITM3-0007 DROP (REACTION) TEST ON ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108 & AC7108/4
AITM3-0008 DETERMINATION OF THE EXTENT OF CURE BY DIFFERENTIAL SCANNING CALORIMETRY NMMT AC7122 & AC7122/4
AITM3-0009 DETERMINATION OF CHROMATE LEACHING CHARACTERISTICS out out
AITM3-0010 DETERMINATION OF STRIPPABILITY out out
AITM3-0012 SHEAR TESTING OF METALLIC MATERIALS WROUGHT PRODUCTS MTL AC7101/ AC7101/3
AITM3-0013 TESTING OF SUSCEPTIBILITY TO EXFOLATION CORROSION IN 2XXX AND 7XXX SERIES WROUGHT ALUMINIUM MTL AC7101/ AC7101/6
AITM3-0015 ALLOY PRODUCTS
DETERMINATION OF PHOSPHORIC ACID CONTENT out out
AITM3-0016 STORAGE STABILITY OF LIQUID NON AQUEOUS CLEANING AGENTS out out
AITM3-0017 GAS CHROMATOGRAPHY (GC) out out
AITM3-0018 VOLATILE LIQUID CLEANING AGENTS AND SOLVENTS ODOR TEST METHOD out out
AITM3-0020 DIRT REMOVING CAPABILITY out out
AITM3-0021 REMOVAL OF ADHESIVE RESIDUES FROM THE USE OF PRESSURE SENSITIVE MASKING TAPES out out
AITM3-0022 DETERMINATION OF AMINE VALUE out out
AITM3-0023 DETER MINATION OF VISCOSSITIES AND FLOW CURVES USING STANDARD DESIGN ROTARY VISCOMETERS out out
AITM3-0024 DETERMINATION OF PIGMENT CONTENT out out
AITM3-0025 DETERMINATION OF NON VOLATILE CONTENT NMMT AC7122 & AC7122/2
AITM3-0026 SEALANTS - DETERMINATION OF MICROBIOLOGICAL PERFORMANCE out out
AITM3-0027 DETERMINATION OF THE MELTING BEHAVIOUR AND THE EXTENT OF CRYSTALLINITY OF SEMI-CRYSTALLINE out out
AITM3-0029 MATERIALS BY DIFFERENTIAL
DETERMINATION SCANNING
OF IRON (III) AS CALORIMETRY
REACTIVE (DSC)
COMPOUND IN ACIDIC SURFACE TREATMENT BATHS CP AC7108 & AC7108/4
AITM3-0030 TITRATION OF SULPHURIC AND TARTARIC ACID IN ANODIZING ELECTROLYTES CP AC7108 & AC7108/4
AITM3-0032 ANALYSIS OF METALS IN GALVANIC BATHES BY ICP-SPECTROSCOPY MTL AC7101 & AC7101/2
AITM3-0034 COMBINED DETERMINATION OF FREE HYDROXIDE AND ALUMINIUM IN ALKALINE SURFACE TREATMENT BATHS CP or MTL (AC7101 & AC7101/2) or (AC7108 & AC7108/4)
AITM3-0035 DETERMINATION OF CHLORIDE CONTAMINATIONS IN SURFACE TREATMENT BATHS CP AC7108 & AC7108/4
AITM3-0036 DETERMINATION OF HYDROGEN IONS IN SURFACE TREATMENT BATHS CP AC7108 & AC7108/4
AITM3-0037 DETERMINATION OF PHOSPHORIC AND SULPHURIC ACID IN ANODIZING ELECTROLYTES out out
AITM3-0038 DETERMINATION OF NON-VOLATILE-RESIDUE CP AC7108 & AC7108/4
AITM3-0039 DETERMINATION OF PARTICLE SIZES out out
AITM4-0002 MICROSTRUCTURAL CHARACTERIZATION OF WELDED ALUMINIUM STRUCTURES out out
AITM4-0003 TEST METHOD FOR DETERMINING THE PORE CONTENT OF FIBER REINFORCED PLASTICS USING AUTOMATIC out out
AITM4-0004 IMAGE ANALYSIS
CHARACTERIZATION OF OXIDE-LAYERS VIA SCANNING ELECTRON MICROSCOPY out out
AITM4-0005 MACROSCOPIC AND MICROSCOPIC EXAMINATION OF FIBER REINFORCED PLASTIC out out
AITM5-0002 GALVANIC CORROSION PREVENTION CAPABILITY OF SEALANTS out out
AITM5-0003 DETERMINATION OF THE ABSENCE OF ATTACK BY STRESS CORROSION OF A LIQUID CLEANING AGENT out out
AITM5-0009 DETERMINATION OF RESISTANCE TO BOND LINE CORROSION out out
AITM5-0010 TEMPORARY PROTECTIVES - FREEDOM FROM CORROSIVE EFFECTS out out
AITM5-0011 NEUTRAL SALT SPRAY TEST CORROSION BEHAVIOUR OF SURFACE TREATMENTS ON ALUMINIUM, TITANIUM AND out out
AITM5-0012 STEEL ALLOYS
CORROSION PREVENTION CAPABILITY OF NON HARDENING JOINTING COMPOUNDS UNDER SALT SPRAY CP AC7108 & AC7108/4
AITM6-0005 EXPOSURE
3D MEASUREMENT OF METALLIC SEAMLESS DRAWN INTERNAL PRESSURE TUBES out out
AITM6-0011 NON DESTRUCTIVE INSPECTION OF COMPOSITE PARTS out out
AITM6-0012 REFERENCE STANDARDS FOR NON DESTRUCTIVE INSPECTION METHODS ON FIBER COMPOSITES out out
AITM6-0013 EVALUATION OF CONVENTIONAL ULTRASONIC INSPECTION FACILITIES, EQUIPMENTS AND PROBES out out
AITM6-0014 PROBABILITY OF DETECTION (POD) out out
AITM6-0015 THERMOGRAPHIC INSPECTION - GENERAL out out
AITM6-0016 EVALUATION OF PHASED-ARRAY ULTRASONIC INSPECTION FACILITIES, EQUIPMENT AND PROBES out out
AITM6-0017 SHEAROGRAPHY INSPECTION PROCESS ¿ GENERAL out out
AITM6-0018 SCRATCH DEPTH MEASUREMENT USING SCRATCHVIEW MEASUREMENT OF THE SCRATCHES DEPTH BY LASER out out
AITM6-0020 TRIANGULATION
INSPECTION OF PARTS MADE OF FIBER REINFORCED PLASTICS DURING THE ASSEMBLY FOR POSSIBLE DAMAGE out out
AITM6-1001 PENETRANT TESTING NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
AITM6-1002 SMEARING DETERMINATION out out
AITM6-2001 MAGNETIC PARTICLES INSPECTION NDT AC7114 & AC7114S & AC7114/2 & AC7114/2S
AITM6-3001 OPTICAL PROFILE MEASUREMENT OF LASER BEAM WELDED STRINGER - SKIN JOINTS out out
AITM6-3002 MEASUREMENT OF CLEANLINESS OF HYDRAULIC DISTRIBUTION COMPONENTS out out
AITM6-3003 MEASUREMENT OF SURFACE IRREGULARITIES USING SHADOW MOIRÉ (MOIRÉVIEW) out out
AITM6-3004 VISUAL INSPECTION OF COMPOSITE PARTS ASA or COMP AC7135 or AC7118 PAR
AITM6-3005 VISUAL INSPECTION OF GLASS FIBRE COMPOSITES BY TRANSMITTED LIGHT ASA or COMP AC7135 or AC7118 PAR
AITM6-3006 TESTING OF STEELS AFTER MACHINING BY ETCH INSPECTION CP AC7108 & AC7108/2
AITM6-3007 RESIN THICKNESS MEASUREMENT ON COMPOSITE PARTS USING OPTICAL COHERENCE TOMOGRAPHY out out
AITM6-4001 ULTRASONIC THROUGH TRANSMISSION OF GLARE LAMINATE IN SQUIRTER TECHNIQUE out out
AITM6-4002 THROUGH TRANSMISSION ULTRASONIC INSPECTION OF CFRP AND SANDWICH NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4003 ULTRASONIC PULSE-ECHO TESTING OF METALLIC MATERIALS (PLATES, BARS, EXTRUSIONS AND BLANKS) NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4004 ULTRASONIC TESTING OF LASER BEAM WELDED STRINGER-SKIN JOINTS out out
AITM6-4005 ULTRASONIC PULSE ECHO INSPECTION OF CFRP NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4006 NON-DESTRUCTIVE TESTING OF ASSEMBLIES WITH GLARE BY ULTRASONIC THROUGH TRANSMISSION FLAW NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4007 DETECTION
MANUAL ULTRASONIC INSPECTION OF GLARE LAMINATES AND ADHESIVELY BONDED DOUBLERS FOR THE out out
AITM6-4008 DETECTION
ULTRASONICOF DAMAGE AS
INSPECTION A FRICTION
OF RESULT OF VISIBLE
STIR INDICATIONS
WELDED SKIN TO SKIN JOINTS out out
AITM6-4009 PHASED ARRAY ULTRASONIC INSPECTION OF SPLICE JOINTS AND INTERLAMINAR DOUBLER RUN-OUTS IN GLARE out out
AITM6-4010 LAMINATES FOR
INSPECTION THE DETECTION
OF FIBRE OF BY
COMPOSITES DAMAGE AS A RESULT
ULTRASONIC OF ARRAY
PHASED VISIBLETECHNIQUE
INDICATIONS NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4011 US GENERAL out out
AITM6-4012 US PULSE-ECHO INSPECTION OF GLASS FIBER REINFORCED PLASTIC NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 17
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
AITM6-4013 ULTRASONIC THROUGH TRANSMISSION INSPECTION IN SQUIRTER TECHNIQUE OF METAL BONDED PARTS NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4014 THICKNESS MEASUREMENT OF FIBRE COMPOSITES BY UT PULSE-ECHO TECHNIQUE out out
AITM6-4015 MANUAL ULTRASONIC THROUGH-TRANSMISSION INSPECTION OF BONDED ASSEMBLIES (METAL TO GLARE/METAL out out
AITM6-4016 TO METAL) MEASUREMENT OF METALS BY ULTRASONIC PULSE-ECHO TECHNIQUE
THICKNESS out out
AITM6-4017 ULTRASONIC THROUGH TRANSMISSION INSPECTION IN SQUIRTER AND IMMERSION TECHNIQUE OF METAL & NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4018 METALLIC
AIR CORE
COUPLED BONDED SANDWICH
ULTRASONIC TESTING PARTS out out
AITM6-4019 RESONANCE FREQUENCY INSPECTION USING BONDMASTER out out
AITM6-4020 ACOUSTIC IMPEDANCE MEASUREMENT OF ACOUSTIC MATERIAL WITH CHUNG AND BLASER METHOD out out
AITM6-4021 REFLECTOR PLATE ULTRASONIC INSPECTION NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4022 ULTRASONIC PULSE-ECHO INSPECTION OF AREAS AROUND FASTENER AND RIVET HOLES IN COMPOSITES NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4023 LASER - ULTRASONIC INSPECTION out out
AITM6-4024 CHARACTERISATION OF OUT-OF-PLANE WAVINESS IN CFRP TAPE LAMINATES BY ULTRASONIC B-SCAN NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4025 TECHNIQUE
ULTRASONIC INSPECTION OF TUBES NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
AITM6-4026 ULTRASONIC PULSE-ECHO INSPECTION USING TOTAL FOCUSING METHOD OF METALLIC DIRECT ENERGY DEPOSIT out out
AITM6-5001 COMPONENTS
INSPECTION OF ADHESIVE BONDED GLARE WITH THE FOKKER BOND TESTER out out
AITM6-5002 ULTRASONIC RESONANCE IMPEDANCE INSPECTION USING FOKKER BOND TESTER out out
AITM6-5003 TAP-TEST out out
AITM6-6002 CLADDING THICKNESS MEASUREMENT out out
AITM6-6003 BY HIGH
EDDY FREQUENCY
CURRENT EDDY CURRENT
FOR SURFACE CRACK DETECTION NDT AC7114 & AC7114S & AC7114/5 & AC7114/5S
AITM6-6004 DETERMINATION OF ELECTRICAL CONDUCTIVITY OF NON-FERROMAGNETIC MATERIALS HT AC7102 & AC7102/5
AITM6-6005 ROTATING PROBE EDDY CURRENT INSPECTION out out
AITM6-6006 COATING THICKNESS MEASUREMENT CP AC7108 & (AC7108/1 or AC7108/4 part B16)
AITM6-6007 LOW FREQUENCY EDDY CURRENT INSPECTION TO DETECT SUBSURFACE CRACKS IN ELECTRICALLY out out
AITM6-7002 CONDUCTIVE MATERIALS
RADIOGRAPHIC INSPECTION-GENERAL NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
AITM6-7003 RADIOGRAPHIC INSPECTION OF WELDED PARTS AND COMPONENTS out out
AITM6-7005 RADIOSCOPIC INSPECTION OF METALLIC MATERIALS BY X- AND GAMMA RAYS (DIGITAL RADIOGRAPHY) NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
AITM6-7006 COMPUTED TOMOGRAPHY (CT) WITH X-RAYS (INCLUDING PLANAR X-RAY TOMOGRAPHY) out out
AITM6-7007 X-RAY INSPECTION USING DIGITAL DETECTOR ARRAYS NDT AC7114 & AC7114S & AC7114/10 & AC7114/10S
AITM6-9001 MEASUREMENT OF KINKS IN ALUMINIUM SHEETS DESIGNATED FOR GLARE PRODUCTION out out
AITM6-9002 SPECTRAL ONLINE SILICON CONCENTRATION DETERMINATION OF LASER BEAM WELDED STRINGER-SKIN JOINTS out out
AITM6-9003 LEAK TEST FOR SANDWICH STRUCTURE out out
AITM6-9004 INSPECTION FOR CONFIRMATION OF THE ANODISING PROCESS (BASED UPON MEASUREMENT OF SURFACE CP AC7108 & (AC7108/1 or AC7108/8)
AITM6-9005 RESISTANCE)
LEAK TEST BY SURFACE WETTING out out
AITM6-9006 DETECTION OF DEFECTS IN ISULATING COATINGS BY MEANS OF CAPACITIVE MEASUREMENT out out
AITM6-9007 ESN FLEXIBLE JUNCTIONS MEASUREMENT ASA AC7135 & AC7135/2
AITM6-9008 ELECTRICAL BONDING: MEASURE RESISTANCE OF ELECTRICAL BONDING POINTS ASA AC7135 & AC7135/2
AITM6-9009 BONDING out out
AITM6-9010 DETERMINATION OF THE TOTAL RESISTANCE OF INSULATING COATINGS out out
AITM7-0001 RESISTANCE TO MICROBIAL GROWTH out out
AITM7-0003 SEALANTS: DETERMINATION OF APPLICATION TOME OF SEALING MATERIALS ASA AC7135 & AC7135/4
AITM7-0005 SEALANTS, DETERMINATION OF CONSISTENCY ASA AC7135 & AC7135/4
AITM7-0006 ASSESSMENT OF SEALANT COMPATIBILITY ASA AC7135 & AC7135/4
AITM7-0008 MICROBIOLOGICAL MONITORING OF TSA ANODISATION BATHS BAIT SUBSTRATES out out
AITM7-0009 DETECTION OF FUNGAL CONTAMINATION IN TSA ANODISATION BATHS VITALITY TEST out out
AITM7-0010 DETERMINATION OF MICROBIOLOGICAL CONTAMINATION IN AVIATION FUEL out out
AITM7-0011 RESISTANCE TO FUNGAL GROWTH out out
AMS-STD-2154 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR NDT AC7114 & AC7114S & AC7114/3
ASTMB117 STANDARD PRACTICE FOR OPERATING SALT SPRAY (FOG) APPARATUS CP or MTL (AC7108 & AC7108/4) or (AC7101 & AC7101/6)
ASTMB244 MEASUREMENT OF THICKNESS OF ANODIC COATINGS ON ALUMINUM AND OF OTHER NONCONDUCTIVE COATINGS CP AC7108 & AC7108/4
ASTMB557 ON NONMAGNETIC
TENSION BASIS METALS
TESTING WROUGHT AND WITH
CASTEDDY-CURRENT
ALUMINUM- ANDINSTRUMENTS
MAGNESIUM-ALLOY PRODUCTS MTL AC7101 & AC7101/3
ASTMB594 STANDARD PRACTICE FOR ULTRASONIC INSPECTION OF ALUMINUM-ALLOY WROUGHT PRODUCTS NDT AC7114 & AC7114S & AC7114/3
ASTMB647 INDENTATION HARDNESS OF ALUMINIUM ALLOYS BY MEANS OF A WEBSTER HARDNESS GAGE out out
ASTMD1125 STANDARD TEST METHODS FOR ELECTRICAL CONDUCTIVITY AND RESISTIVITY OF WATER CP AC7108 & AC7108/4
ASTMD1293 STANDARD TEST METHODS FOR PH OF WATER CP AC7108 & AC7108/4
ASTMD3359 MEASURING ADHESION BY TAPE TEST CP AC7108 & AC7108/4
ASTME10 STANDARD TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ASTME1004 STANDARD TEST METHOD FOR DETERMINING ELECTRICAL CONDUCTIVITY USING THE ELECTROMAGNETIC (EDDY- HT AC7102 & AC7102/5
ASTME112 CURRENT) METHOD
DETERMINING AVERAGE GRAIN SIZE MTL AC7101 & AC7101/4
ASTME1444 STANDARD PRACTICE FOR MAGNETIC PARTICLE TESTING NDT AC7114 & AC7114S & AC7114/2
ASTME1447 DETERMINATION OF HYDROGEN IN TITANIUM AND TITANIUM ALLOYS BY INERT GAS FUSION THERMAL MTL AC7101 & AC7101/2
ASTME18 CONDUCTIVITY
STANDARD TEST/ INFRARED
METHODS DETECTION METHOD
FOR ROCKWELL HARDNESS OF METALLIC MATERIALS MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ASTME2033 STANDARD PRACTICE FOR COMPUTED RADIOLOGY (PHOTOSTIMULABLE LUMINESCENCE METHOD) NDT AC7114 & AC7114S & AC7114/10
ASTME21 STANDARD TEST METHODS FOR ELEVATED TEMPERATURE TENSION TESTS OF METALLIC MATERIALS MTL AC7101 & AC7101/3
ASTME215 STANDARD PRACTICE FOR STANDARDIZING EQUIPMENT FOR ELECTROMAGNETIC TESTING OF SEAMLESS NDT AC7114 & AC7114S & AC7114/5
ASTME2445 ALUMINUM-ALLOY TUBE
STANDARD PRACTICE FOR QUALIFICATION AND LONG-TERM STABILITY OF COMPUTED RADIOLOGY SYSTEMS NDT AC7114 & AC7114S & AC7114/10
ASTME3 STANDARD GUIDE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS MTL AC7101 & AC7101/4
ASTME340 MACROETCHING METALS AND ALLOYS MTL AC7101 & AC7101/4
ASTME384 MICROINDENTATION HARDNESS OF MATERIALS MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ASTME399 LINEAR-ELASTIC PLANE-STRAIN FRACTURE TOUGHNESS KIC OF METALLIC MATERIALS MTL AC7101 & AC7101/3
ASTME407 MICROETCHING METALS AND ALLOYS MTL AC7101 & AC7101/4
ASTME45 DETERMINING THE INCLUSION CONTENT OF STEEL MTL AC7101 & AC7101/4
ASTME8 TENSION TESTING OF METALLIC MATERIALS MTL AC7101 & AC7101/3
ASTME92 VICKERS HARDNESS AND KNOOP HARDNESS OF METALLIC MATERIALS MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ASTMG110 EVALUATING INTERGRANULAR CORROSION RESISTANCE OF HEAT TREATABLE ALUMINIUM ALLOYS BY IMMERSION MTL AC7101 & AC7101/6
ASTMG34 IN SODIUM CHLORIDE
EXFOLIATION + HYDROGEN
CORROSION PEROXIDE
SUSCEPTIBILITY SOLUTION
IN 2XXX AND 7XXX SERIES ALUMINUM ALLOYS (EXCO TEST) MTL AC7101 & AC7101/6
ASTMG85 MODIFIED SALT SPRAY (FOG) TESTING CP AC7108 & AC7108/4
EN2002-1 TENSILE TESTING AT AMBIENT TEMPERATURE MTL AC7101 & AC7101/3
EN2002-2 TENSILE TESTING AT ELEVATED TEMPERATURE MTL AC7101 & AC7101/3
EN2002-5 TEST METHODS FOR METALLIC MATERIALS - PART 5: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING MTL AC7101 & AC7101/3
EN2002-16 AEROSPACE SERIES - METALLIC MATERIALS; TEST METHODS - PART 16 : NON-DESTRUCTIVE TESTING, NDT AC7114 & AC7114S & AC7114/1
EN2003-9 PENETRANT
TITANIUM TESTING
AND TITANIUM ALLOYS - PART 9: DETERMINATION OF SURFACE CONTAMINATION (METHOD A: MTL AC7101 & AC7101/5
EN2004-1 MICROGRAPHIC
ELECTRICAL EXAMINATION / METHOD B: HARDNESS TESTING)
CONDUCTIVITY HT AC7102 & AC7102/5
EN2243-1 STRUCTURAL ADHESIVES - PART 1: SINGLE LAP SHEAR NMMT AC7122 & AC7122/1
EN2243-2 STRUCTURAL ADHESIVES - PART 2: PEEL METAL-METAL NMMT AC7122 & AC7122/1
EN2243-3 STRUCTURAL ADHESIVES - PART 3: PEELING TEST METAL-HONEYCOMB CORE NMMT AC7122 & AC7122/1
EN2243-4 STRUCTURAL ADHESIVES - PART 4: METAL-HONEYCOMB CORE FLATWISE TENSILE TEST NMMT AC7122 & AC7122/1
EN2243-5 AEROSPACE SERIES — NON-METALLIC MATERIALS — STRUCTURAL ADHESIVES — TEST METHOD — PART 5: NMMT AC7122 & AC7122/1
EN2243-6 AGEING TESTSADHESIVES - PART 6: DETERMINATION OF SHEAR STRESS AND SHEAR STRAIN
STRUCTURAL NMMT AC7122 & AC7122/1
EN2557 CARBON FIBRE PREIMPREGNATES - DETERMINATION OF MASS PER UNIT AREA NMMT AC7122 & AC7122/1
EN2558 CARBON FIBRE PREIMPREGNATES - DETERMINATION OF THE VOLATILE CONTENT NMMT AC7122 & AC7122/1
EN2559 CARBON FIBRE PREIMPREGNATES - TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT NMMT AC7122 & AC7122/1
EN2560 AND THE FIBRE
CARBON MASS OF FIBRE PER UNIT-AREA
PREIMPREGNATES DETERMINATION OF THE RESIN FLOW NMMT AC7122 & AC7122/1
EN2561 CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - TENSILE TEST PARALLEL TO THE FIBRE NMMT AC7122 & AC7122/1
EN2563 DIRECTION
CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - DETERMINATION OF APPARENT NMMT AC7122 & AC7122/1
EN2564 INTERLAMINAR
CARBON FIBRE SHEAR STRENGTH
LAMINATES - DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS NMMT AC7122 & AC7122/1
EN2667-1(PRen) FOAMING STRUCTURAL ADHESIVES - PART 1: TENSILE SINGLE-LAP SHEAR NMMT AC7122 & AC7122/1
EN2667-2(PRen) FOAMING STRUCTURAL ADHESIVES - PART 2: COMPRESSIVE TUBE SHEAR NMMT AC7122 & AC7122/1
EN2951 METALLIC MATERIALS - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS MTL AC7101 & AC7101/4
EN3718 ULTRASONIC INSPECTION OF TI 3AL 2,5V SEAMLESS TUBING FOR HYDRAULIC SYSTEMS, COLD WORKED AND NDT AC7114 & AC7114S & AC7114/3
EN4050 STRESS
TEST RELIEVED
METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND NDT AC7114 & AC7114S & AC7114/3
I+D-E-026 FORGINGS
ENSAYO DE TRACCIÓN SOBRE ESTRATIFICADOS DE FIBRA DE CARBONO NMMT AC7122 & AC7122/1
I+D-E-031 ENSAYO DE CORTADURA INTERLAMINAR SOBRE ESTRATIFICADOS DE FIBRA DE CARBONO NMMT AC7122 & AC7122/1
I+D-E-051 ENSAYO DE COMPRESION SOBRE ESTRATIFICADOS DE FIBRA DE CARBONO NMMT AC7122 & AC7122/1
I+D-E-127 ADHESIVE SHEAR TEST NMMT AC7122 & AC7122/1
I+D-E-128 ADHESIVE METAL & METAL PEKLING TEST NMMT AC7122 & AC7122/1
I+D-E-136 MAGNETIC PARTICLE INSPECTION PROCESS NDT AC7114 & AC7114S & AC7114/2 & AC7114/2S
I+D-E-137 PENETRANT INSPECTION PROCESS NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
I+D-E-138 RADIOGRAPHIC INSPECTION NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
I+D-E-139 CRACK DETECTION THROUGH EDDY CURRENTS out out
I+D-E-140 ALUMINIUM ALLOY HEAT TREATMENT INSPECTION BY ELECTRIC CONDUCTIVITY AND HARDNESS HT AC7102 & AC7102/5
I+D-E-275 NON - DESTRUCTIVE INSPECTION OF CARBON FIBER COMPOSITE PARTS out out
I+D-E-280 ULTRASONIC PULSE-ECHO INSPECTION OF CARBON FIBRE COMPOSITE NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
I+D-E-282 THROUGH - TRANSMISSION ULTRASONIC INSPECTION OF CARBON FIBER COMPOSITE PARTS NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
I+D-E-290 INTERLAMINAR FRACTURE TOUGHNESS TEST ON CARBON FIBER LAMINATES NMMT AC7122 & AC7122/1
I+D-E-292 COMPRESSION AFTER IMPACT TEST NMMT AC7122 & AC7122/1
I+D-E-293 INPLANE SHEAR TEST ON CARBON FIBER LAMINATES NMMT AC7122 & AC7122/1
I+D-E-294 TAP TESTING ON BONDED ELEMENTS AND & OR COMPOSITE STRUCTURES out out
I+D-E-295 REFERENCE STANDARD FOR NON-DESTRUCTIVE INSPECTION OF CARBON FIBRE COMPOSITES out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 18
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
I+D-E-296 EVALUATION OF ULTRASONIC TRANSDUCERS out out
I+D-E-303 RADIOGRAPHIC INSPECTION OF COMPOSITE MATERIAL STRUCTURES out out
I+D-E-325 COMPOSITE LAMINATES BEARING TEST ON FASTENER JOINTS NMMT AC7122 & AC7122/1
I+D-E-326 TENSION BY-PASS TEST ON COMPOSITE LAMINATES WITH INSTALLED FASTENER NMMT AC7122 & AC7122/1
I+D-E-336 LEAK TESTING IN SANDWICH STRUCTURES out out
I+D-E-338 REFLECTOR - PLATE ULTRASONIC INSPECTION OF CARBON FIBER COMPOSITE ELEMENTS NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
I+D-E-352 LAP SHEAR STRENGTH TESTS OF ADHESIVELY BONDED CARBON FIBER JOINTS NMMT AC7122 & AC7122/1
I+D-E-379 MEASURING COATING THICKNESS ON METAL SUBSTRATE out out
I+D-E-383 EVALUATION OF ULTRASONIC INSPECTION EQUIPMENTS AND FACILITIES out out
I+D-F-015 INSTALLATION OF BLIND BOLTS PULL TYPE ASA AC7135 & AC7135/1
I+D-L-113 REMACHES DE CANA MACIZA EN ALEACION DE ALUMINIO Y ALEACION DE TITANIO NIOBIO out out
I+D-P-006 SHOT PEENING FOR FATIGUE ENHANCEMENT OF METAL PARTS SE AC7117 & AC7117/1 & AC7117/2 & AC7117/5
I+D-P-009 CLEANING WITH LIQUID NON AQUEOUS AGENTS IN VAPOUR PHASE CP AC7108
I+D-P-032 STEEL COPPER - PLATING FOR HEAT TREATMENTS CP AC7108 & AC7108/9
I+D-P-033 CLASSIFICATION OF WATERS FOR SURFACE TREATMENTS AND RINSINGS CP AC7108
I+D-P-034 DIMPLING FOR FASTENERS ASA AC7135
I+D-P-035 CLEANING OF ALUMINIUM ALLOYS AFTER THE DRY SHOT PEENING out out
I+D-P-036 CLEANING AND PROTECTION OF FLUID SYSTEM COMPONENTS CP AC7108
I+D-P-037 DRY BLASTING OF AERONAUTICAL COMPONENTS CP AC7108
I+D-P-038 CLEANING AND PASSIVATION OF STAINLESS STEELS AND REFREACTORY NICKEL AND COBALT ALLOYS CP AC7108 & AC7108/12
I+D-P-040 ACID PICKLING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/12
I+D-P-046 HARD ANODIZING OF ALUMINIUM AND ITS ALLOYS CP AC7108 & AC7108/8
I+D-P-047 CHEMICAL NICKEL PLATING CP AC7108 & AC7108/10
I+D-P-048 ANODIZING OF TITANIUM AND ITS ALLOYS CP AC7108 & AC7108/8
I+D-P-049 BLACK OXIDE COATINGS FOR STEELS CP AC7108
I+D-P-050 MANUFACTURING OF PLASTICS PARTS BY THE WET METHOD out out
I+D-P-052 MANUFACTURING OF RESIN IMPREGNATED GLASS FIBER REINFORCED PLASTIC COMP AC7118 PAR + CP
I+D-P-053 REPAIR OF WITH REINFORCED PLASTIC MANUFACTURED ELEMENTS out out
I+D-P-054 MANUFACTURING OF PARTS WITH TERMOPLASTIC MATERIALS out out
I+D-P-055 NON STRUCTURAL BONDINGS. SELECTION OF THE ADHESIVE out out
I+D-P-056 MANUFACTURING OF IN WATER SOLUBLE CORES FOR THE BUILDING OF REINFORCED PLASTIC PARTS out out
I+D-P-058 DRY LUBRICATION ( MOLYBDENUM DISULFIDE BASE ) CP AC7108 & AC7108/1
I+D-P-059 ANTIFRICTION PAINTS CP AC7108 & AC7108/1
I+D-P-060 PAINT (GENERAL SPECIFICATION) CP AC7108 & AC7108/1
I+D-P-061 LIQUID SHIMS ASA AC7135
I+D-P-062 INTEGRAL FUEL TANK SEALING AND PROTECTION ASA AC7135 & AC7135/4
I+D-P-064 PAINT SYSTEMS FOR METALLIC DETAIL PARTS AND ASSEMBLIES CP AC7108 & AC7108/1
I+D-P-065 FIXING OF MECHANICAL ELEMENTS WITH ANAEROBIAN RESINS (LOCTITE TYPE) out out
I+D-P-067 SURFACE PREPARATION FOR NON-STRUCTURAL BONDINGS out out
I+D-P-068 SOFT BOLDERING OF ELECTRIC CONNECTIONS IN AERONAUTICAL WORKS out out
I+D-P-070 STRUCTURAL BONDINGS (GENERAL SPECIFICACION) COMP AC7118 MB
I+D-P-071 NON STRUCTURAL BONDINGS (GENERAL SPECIFICATION) out out
I+D-P-072 CLEANING AND PICKLING OF ALUMINIUM AND ITS ALLOYS CP AC7108
I+D-P-074 ABRASIVE CLEANING CP AC7108
I+D-P-075 MANUFACTURING OF STRETCHING TOOLS, WITH RESINS out out
I+D-P-076 ELECTRONIC BRONZE PLATINGS CP AC7108
I+D-P-077 SELECTIVE CADMIUM PLATING (BY BRUSH) CP AC7108 & AC7108/13
I+D-P-078 LOW EMBRITTLEMENT CADMIUM - TITANIUM ELECTROLYTIC PLATINGS CP AC7108 & AC7108/9
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
I+D-P-090 CLEANING AND PICKLING OF TITANIUM AND TITANIUM ALLOYS CP If performed prior NDT: AC7108 & AC7108/2
I+D-P-091 PERFORMANCE OF SHIELD CLEARANCE ON SHIELDED CABLES out out
I+D-P-093 POLYAMIDE COATINGS ON METALS (RILSANIZATION) out out
I+D-P-094 SOFT SOLDERING OF ELECTRIC CONNECTION IN AVIONIC WORKS out out
I+D-P-095 STEEL PHOSPHATIZING CP AC7108 & AC7108/11
I+D-P-098 CLEANING AND PICKLING OF MAGNESIUM AND ITS ALLOYS CP AC7108 & AC7108/12
I+D-P-106 LOW EMBRITTLEMENT NICKEL PLATING (SULFAMATE BATH) CP AC7108
I+D-P-107 FATIGUE PREVENTION BY MEANS OF WET BLAST (TFCH) out out
I+D-P-109 LOW EMBRITTLEMENT NICKEL PLATING CP AC7108 & AC7108/9
I+D-P-110 HARD CHROMIUM PLATING CP AC7108 & AC7108/9
I+D-P-111 PHOSPHORIC ANODIZING FOR THE STRUCTURAL BONDING OF ALUMINIUM AND ITS ALLOYS CP AC7108 & AC7108/3
I+D-P-112 PREVIOUS TREATMENT TO THE P.T.F.E. BONDING out out
I+D-P-114 ANODIZING OF MAGNESIUM AND ITS ALLOYS CP AC7108 & AC7108/8
I+D-P-115 ELECTROLYTIC CADMIUM PLATING CP AC7108 & AC7108/9
I+D-P-117 STEEL AND TITANIUM HI-LOK FASTENERS ASA AC7135 & AC7135/1
I+D-P-119 CLEANING AND PICKLING NON-STAINLESS STEELS CP AC7108 & AC7108/12
I+D-P-131 PREPARATION OF ALUMINIUM AND ITS ALLOYS FOR LATER COATINGS CP AC7108
I+D-P-134 PREPARATION OF COPPER AND COPPER ALLOYS FOR SUBSEQUENT PLATING CP AC7108
I+D-P-143 LOCAL SHOTPEENING BY MEANS OF PORTABLE EQUIPMENTS SE AC7117 & AC7117/5
I+D-P-146 APPLICATION OF SEALANTS ASA AC7135 & AC7135/4
I+D-P-147 MANUAL CLEANING WITH SOLVENTS CP AC7108
I+D-P-148 EMULSION CLEANING CP AC7108
I+D-P-151 ELECTROLYTIC SILVER PLATING CP AC7108 & AC7108/9
I+D-P-152 CHEMICAL, MILLING OF ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108 & AC7108/5
I+D-P-157 APPLICATION OF CORROSION PREVENTION PRIMERS FOR BONDING CP AC7108
I+D-P-176 QUALIFICATION AND RECEPTION OF NON METALLIC HENYCOMB CORES COMP AC7118 CP
I+D-P-177 INSTALLATION OF SHUR-LOK INSERTS IN SANDWICH PARTS COMP AC7118 PAR
I+D-P-178 QUALIFICATION AND RECEPTION OF METALLIC HONEYCOMB CORES COMP AC7118 MB
I+D-P-181 FUSION WELDING OF METALS WELD AC7110 & AC7110/5
I+D-P-182 RESISTANCE WELDING OF METALS WELD AC7110 & AC7110/4
I+D-P-184 BARREL TUMBLING AND VIBRATORY FINISHING out out
I+D-P-186 SEALANT PROTECTION AGAINST PROJECTIONS OF HYDRAULIC FLUIDS ASA AC7135 & AC7135/4
I+D-P-187 QUALIFICATION AND RECEPTION OF FILM ADHESIVES (120 ºC CURE) COMP AC7118 PAR + CP
I+D-P-188 APPLICATION OF FLUORESCENT PAINTS CP AC7108 & AC7108/1
I+D-P-193 CRAMPING OF ELECTRIC CONNECTIONS IN AERONAUTICAL AND AVIONIC WORKS out out
I+D-P-196 ELECTROLYTIC ZINC PLATING CP AC7108 & AC7108/9
I+D-P-199 SWAGING OF FLARELESS TUBES INTENDED FOR FLUID SYSTEMS out out
I+D-P-202 CHEMICAL CONVERSION FILMS ON ALUMINIUM AND ITS ALLOYS CP AC7108 & AC7108/11
I+D-P-206 FORMING, STRAIGHTENING AND FITTING OF METALLIC PARTS out out
I+D-P-207 WELDED STEEL TUBES CORROSION PROTECTION SYSTEM out out
I+D-P-209 COLD WORKING OF HOLES ASA AC7135
I+D-P-212 FORMING AND STRAIGHTENING OF ALUMINIUM AND ITS ALLOYS out out
I+D-P-213 ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS CP AC7108 & AC7108/8
I+D-P-216 CONDUCTOR AND CABLE PEELING FOR CRAMPING OR SOLDERING out out
I+D-P-217 CARBURIZING HT AC7102 & AC7102/3
I+D-P-218 GASEOUS NITRIDING HT AC7102 & AC7102/4
I+D-P-220 HEAT TREATMENTS OF THE ALUMINIUM ALLOYS HT AC7102 & AC7102/2
I+D-P-222 HEAT TREATMENTS OF THE TITANIUM AND ITS ALLOYS HT AC7102
I+D-P-225 HEAT TREATMENT OF CARBON STEELS AND ALLOYED STEELS HT AC7102
I+D-P-226 HEAT TREATMENT OF STAINLESS AND REFRACTORY STEELS HT AC7102
I+D-P-229 SOLDERING AND INSTALLATION OF THERMOCOUPLE LEADS out out
I+D-P-230 QUALIFICATION AND RECEPTION OF EPOXY RESIN PREIMPREGNATED CARBON FIBER MATERIALS, 180°C CURE COMP AC7118 PAR + CP
I+D-P-231 FASTENING OF CARBON FIBRE COMPOSITE STRUCTURES ASA or COMP (AC7135 & AC7135/1) or AC7118 PAR
I+D-P-233 MANUFACTURING OF CARBON FIBRE COMPOSITE MATERIAL STRUCTURES ( LAMINATE AND SANDWICH ) COMP AC7118 PAR + CP
I+D-P-236 REMACHES DE TITANIO GPL Y LGPL LOCKBOLTS ASA AC7135 & AC7135/1
I+D-P-237 MANUFACTURING OF ARAMIDE FIBER COMPOSITE MATERIAL STRUCTURES ( LAMINATE AND SANDWICH ) COMP AC7118 PAR
I+D-P-238 EXPOSURE OF CARBON FIBER/EPOXY RESIN SPECIMENS TO DIFFERENT CHEMICAL AGENTS out out
I+D-P-249 CHLOROPRENE ADHESIVE Z-15.101 BONDING COMP AC7118
I+D-P-250 QUALIFICATION AND RECEPTION OF EPOXY RESIN PREIMPREGNATED GLASS FABRICS COMP AC7118 PAR
I+D-P-251 QUALIFICATION AND RECEPTION OF EPOXY RESIN PREIMPREGNATED ARAMIDE FABRICS COMP AC7118 PAR
I+D-P-263 SILK SCREEN PRINTING OF DIFFUSION BONDING INHIBITORS out out
I+D-P-264 SUPER PLASTIC FORMING OF TITANIUM ALLOYS out out
I+D-P-309 BENDING OF TUBES FOR FLUID SYSTEMS out out
I+D-P-310 ASSEMBLY AND CONNECTION OF PIPES FOR FLUID SYSTEMS out out
I+D-P-312 SWAGING OF PERMASWAGE SLEEVES ON TUBES INTENDED FOR FLUID SYSTEMS out out
I+D-P-313 EROSION RESISTANT PAINT SYSTEM CP AC7108 & AC7108/1
I+D-P-314 QUALIFICATION, RECEPTION AND MAINTENANCE OF WATER BASE CUTTING FLUIDS out out
I+D-P-315 CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYS CP AC7108 & AC7108/5
I+D-P-317 BRONZE COATING BY FLAME SPRAYING out out
I+D-P-319 SWAGING OF FLUID SYSTEMS ( GAMAH, AVICA AND WIGGINGS ) out out
I+D-P-320 RECOMMENDED HOLES AND FITTINGS FOR METRIC FASTENERS out out
I+D-P-321 COLD WORKING OF FUEL DRAINAGE HOLES ASA AC7135
I+D-P-324 BONDING AND CEMENTING OF SILICONE RUBBER TO COMPOSITE MATERIALS out out
I+D-P-329 HOT FORMING OF ALUMINIUM ALLOY SKINS out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 19
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
I+D-P-330 STRUCTURAL BONDING ON PHOSPHORIC ANODIZING COMP AC7118 MB
I+D-P-331 APPLICATION OF HEAT RESISTING ALUMINIZED SILICONE PAINT CP AC7108 & AC7108/1
I+D-P-333 ADHESIVE FILM QUALIFICATION AND RECEPTION (180 ºC CURE) COMP AC7118
I+D-P-337 APPLICATION OF ANTISTATIC PAINTS ON REINFORCED PLASTICS SURFACES CP AC7108 & AC7108/1
I+D-P-342 ORBITAL TUBE WELDING WELD AC7110 & AC7110/5
I+D-P-347 FUNTIONAL TEST OF THE A330 & 340 KARMAN FAIRING out out
I+D-P-348 APPLICATION OF LIQUID RELEASE AGENTS ASA AC7135
I+D-P-355 BONDING AND GROUNDING INSTALLATION ASA AC7135 & AC7135/2
I+D-P-356 BLIND RIVETS LOW AND MEDIUM STRENGTH ASA AC7135
I+D-P-358 PAINTING OF COMPOSITE DETAIL PARTS CP AC7108 & AC7108/1
I+D-P-364 INSTALLATION OF LIGHT, SHORT THREAD, NON-METRIC FASTENERS HI-LITE & VERI-LITE ASA AC7135 & AC7135/1
I+D-P-366 INSTALLATION OF BUSHES, SHRINK AND PRESS FIT ASA AC7135 & AC7135/3
I+D-P-367 QUALIFICATION AND RECEPTION OF ALUMINIUM FOILS WITH ADHESIVE out out
I+D-P-368 QUALIFICATION AND RECEPTION OF STRUCTURAL FOAM ADHESIVES out out
I+D-P-370 SWAGING OF FITTINGS "SWAGELOK" out out
I+D-P-371 INSTALLATION OF ALUMINIUM FOILS FOR LIGHTNING RAY PROTECTION out out
I+D-P-372 LIGHTNING AND ELECTROMAGNETIC FIELD ELECTRICAL CABLE PROTECTION out out
I+D-P-373 WIRE LOCKING OF PARTS ASA AC7135 & AC7135/1
I+D-P-375 THERMAL SPRAY COATINGS out out
I+D-P-376 LOCKING OF PARTS WITH COTTER PINS ASA AC7135 & AC7135/1
I+D-P-380 BLACK OXIDE, CHEMICAL COATINGS ON COPPER AND COPPER ALLOYS CP AC7108
I+D-P-386 THE MANUFACTURE OF COMPOSITE COMPONENTS BY THE RESIN TRANSFER MOULDING (RTM) PROCESS COMP AC7118 LRP + CP
I+D-P-387 MACHINING COMPOSITES COMP AC7118 PAR
I+D-P-393 FREEZING, REFRIGERATION STORAGE AND DEFREEZING OF POLYSULFIDE SEALANT ASA AC7135 & AC7135/4
I+D-P-396 SHIELDED OVERBRAIDING OF ELECTRICAL HARNESSES ( FOR AIRBUS PROGRAMMES ) out out
I+D-P-397 SWAGED RETENTION OF BUSHINGS, "V" GROOVE PROFILE out out
I+D-P-407 BONDING OF ACOUSTICAL BARRIERS BY USAGE OF PRE-RETICULATED ADHESIVE MATERIAL out out
I+D-P-412 REPARACION DE ESTRUCTURAS FABRICADAS CON MATERIALES COMPUESTOS (LAMINADOS Y SANDWICH) COMP AC7118 PAR
I+D-P-413 APPLICATION OF SELF-ADHESIVE AND WITH HEAT ACTIVATED ADHESIVE LABELS out out
I+D-P-415 APPLICATION OF TEMPORARY CORROSION PREVENTION PRODUCTS ASA AC7135 & AC7135/4
I+D-P-416 ALUMINIUM AND ALUMINIUM ALLOY TARTARIC-SULPHURIC ANODISING CP AC7108 & AC7108/8
IGC04-21-111 MATERIAUX METALLIQUES ESSAI DE TRACTION MTL AC7101 & AC7101/3
IGC04-21-112 MATERIAUX METALLIQUES - ESSAI DE RESILIENCE MTL AC7101 & AC7101/3
IGC04-24-116 FRAGILITE - FRAGILISATION SOUS TENSION MTL AC7101 & AC7101/3
IGC04-24-125 MATERIAUX METALLIQUES - CORROSION SOUS CONTRAINTE - ESSAI A CHARGE CONSTANTE SUR EPROUVETTE MTL AC7101/ AC7101/6
IGC04-25-100 LISSE
ELEMENTS METALLIQUES - CONTROLE PAR RESSUAGE out out
IGC04-25-101 RESSUAGE FLUORESCENT PRODUITS QUALIFIES out out
IGC04-25-102 EXAMENS VISUELS SOUS RAYONNEMENT ULTRAVIOLET out out
IGC04-25-105 ELEMENTS METALLIQUES - CONTROLE PAR MAGNETOSCOPIE NDT AC7114 & AC7114S & AC7114/2 & AC7114/2S
IGC04-25-106 ELEMENTS METALLIQUES - CONTROLE PAR MAGNETOSCOPIE- SELECTION DE PRODUITS out out
IGC04-25-110 REGLES A SUIVRE POUR LE CONTROLE RADIOGRAPHIQUE out out
IGC04-25-111 REGLES A SUIVRE POUR LE CONTROLE RADIOSCOPIQUE out out
IGC04-25-115 CONTROLE PAR ULTRASONS DES PRODUITS ET SEMI PRODUITS METALLIQUES (ÉPAISSEUR > 6MM) NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
IGC04-25-116 CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN ALUMINIUM ET ALLIAGES D'ALUMINIUM out out
IGC04-25-117 CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN ACIER out out
IGC04-25-118 CONTROLE PAR ULTRASONS DES EBAUCHES ET DEMI-PRODUITS EN TITANE ET ALLIAGES DE TITANE out out
IGC04-25-119 REGLES A SUIVRE POUR LE CONTROLE PAR ULTRASONS EN DOUBLE TRANSMISSION DES REVETEMENTS NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
IGC04-25-120 CARBONE-RESINE
REGLES EN NAPPES
A SUIVRE POUR (PROCEDE
LA MESURE DE LAC-SCAN)
CONDUCTIVITÉ ELECTRIQUE ( COURANTS DE FOUCAULT ) HT AC7102 & AC7102/5
IGC04-25-121 EDDY CURRENT TESTING OF STEEL TUBES NDT AC7114 & AC7114S & AC7114/5
IGC04-25-130 REGLES A SUIVRE POUR LE CONTROLE PAR ULTRASONS DES ASSEMBLAGES COLLES out out
IGC04-63-110 TRAITEMENT THERMIQUE DES ACIERS CONTROLE DES OPERATIONS ET DES PIECES HT AC7102
IGC04-63-111 TRAITEMENT THERMIQUE DES ALLIAGES D'ALUMINIUM CONTROLE DES OPERATIONS ET DES PIECES HT AC7102 AC7102/2
IGC04-63-140 CONTROLE DES SELS DE TRAITEMENT THERMIQUE HT AC7102
IPDA04-01 NETTOYAGE EQUIPEMENTS DE PLANCHE DE BORD out out
IPDA04-02 NETTOYAGE DES GLACES ET HUBLOTS TOUS AVIONS out out
IPDA04-03 NETTOYAGE DES AMENAGEMENTS COMMERCIAUX out out
IPDA04-04 DESINSECTISATION DES AVIONS out out
IPDA04-05 NETTOYAGE EXTERIEUR AVION AVEC DETERGENT BASE AQUEUSE out out
IPDA04-06 NETTOYAGE PAR PROCEDE CRYOGENIQUE out out
IPDA04-07 NETTOYAGE PAR PROCEDE ENZYMATIQUE out out
IPDA08-01 PROTECTION DES ELEMENTS EN COMPOSITE out out
IPDA25-01 MONTAGE ET ACCOUPLEMENT DES CONNECTEURS PNEUMATIQUES out out
IPDA25-02 INSTALL CAPT MINI SUR SURFACES EXTERNES out out
IPDA25-03 INST THERM SDE MES SURF-40°<T°<200°C out out
IPDA25-04 INSTAL° SONDES TEMP. SURFACE -40/+250°C out out
IPDA25-05 INSTALLATION DE THERMOSONDES POUR MESURE DE TEMPERATURE DE SURFACE A L INTERIEUR DES out out
IPDA25-07 RESERVOIRS
INSTAL° SONDE MESURE TEMPÉRATURE FLUIDES out out
IPDA25-08 INST THERM SDE SUR AMENAGEMENT COMMERCIA out out
IPDA25-09 INSTAL° THERMOCOUPLE SURFACES -70/+300°C out out
IPDA25-11 INSTALLATION EXTENSOMETRIQUE : MESURES DE CONTRAINTES LOCALES PAR PONT TYPE A JUSQU'A 130ºC out out
IPDA25-12 INS EXTEN:MES DE CONTR EN TRACT COMPRESSION out out
IPDA25-13 INS EXTEN:MES DE CONTR EN FLEX TORS-CISAILLEMENT out out
IPDA25-14 INSTALLATION EXTENSOMETRIQUE : MESURES DE CONTRAINTES DYNAMIQUES PAR MONTAGE TYPE D out out
IPDA25-15 MES. EXTEN D'EFFORT SUR ACIER,TITANE,ALU out out
IPDA25-17 INST.SUPPORT CIRCUL.CAPT.MINI AFFLEURANT out out
IPDA25-18 PROTECTION PYROGEL SUR ÉLÉMENT CYL. out out
IPDA25-19 MONTAGE JOINTS RACCORDS GG391 À 397 out out
IPDA25-20 REMISE AU STANDARD DES AVIONS INSTRUMENTES AVEC DES JAUGES DE CONTRAINTES out out
IPDA25-21 COLLAGE ACCELERO ET CAPT DE PROXIMITE out out
IPDA25-22 MONTAGE DES PRISES FRB SERIES HKU505/513 out out
IPDA25-23 RACCORDEMENT DE THERMOCOUPLES DE TYPE K out out
IPDA25-24 INS THERM COL MES DE TEMP -50 +150°C out out
IPDA25-25 INSTAL THERMOCOUPLE SOUDE JUSQU'A 700°C out out
IPDA25-26 MONT. FAISCEAU PNEUMAT SYST MPS 28 VOIES out out
IPDA25-27 CABLAGE CONNECT. SUB DHD15/NSA935399-413 out out
IPDA25-28 CONNECT. ELECT.NSA938355 NSA938999-96/97 out out
IPDA25-29 MEO CÂB ABS0972 SUR NSA938361/938999-97 out out
IPDA25-30 MONT FAISCEAU PNEUMAT SYST MPS 64 VOIES out out
IPDA25-31 INST.ROTOR/ARBR TOURN MESU COUPL TELEM out out
IPDA25-32 INST SONDE TEMP SURF INT RES COMPOSITE out out
IPDA25-33 INST PONT JAUG TYPE A INT RES COMPOSITE out out
IPDA25-34 INST PONT JAUG TYPE C INT RES COMPOSITE out out
IPDA25-35 INST PONT JAUG TYPE D INT RES COMPOSITE out out
IPDA26-01 MONTAGE DES TRAVERSEES D'INSTALLATION D'ESSAIS out out
IPDA26-02 MONTAGE DES TRAVERSEES ELECTRIQUES DEUTSCH DFR out out
IPDA26-03 COLLAGE PAR CLICK BOND ET DEPOSE DES SUPPORTS DE CABLAGES ELECTRIQUES IEV out out
IPDA26-04 MONTAGE DES RACCORDS DOUBLE BAGUE (TYPE SWAGELOK) ASA AC7135 & AC7135/1
IPDA27-01 CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR PIECES DE FONDERIE out out
IPDA27-02 VERIFICATION DIMENSIONNELLE ET SANTE DES ELEMENTS THERMODURCISSABLES EPOXY out out
IPDA27-03 CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES MATRICES, FORGES out out
IPDA27-04 CRITERES D'ACCEPTATION DES DEFAUTS DETECTES PAR RESSUAGE SUR LES LAMINES, FILES OU ETIRES out out
IPDA27-05 MEO DU PROCEDE DE RESSUAGE FLUORESCENT NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
IPDA27-06 PROCEDE DE CONTROLE PAR ULTRASONS - GENERALITES - out out
IPDA27-07 CONTROLE ULTRASONS MANUEL out out
IPDA27-08 CONTROLE ULTRASONS SEMI-AUTOMATIQUE out out
IPDA27-09 CONTROLE ULTRASONS AUTOMATIQUE out out
IPDA27-10 CONTROLE PAR COURANTS DE FOUCAULT out out
IPDA27-12 CONTROLE PAR RADIOGRAPHIE NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
IPDA28-01 POSE DES RUBANS D'IDENTIFICATION SUR TUYAUTERIES out out
IPDA28-02 MARQUAGE ELECTROLYTIQUE out out
IPDA28-04 MARQUAGE A L'ENCRE out out
IPDA28-05 MARQUAGE EXTERIEUR DES AVIONS out out
IPDA28-06 PROTECTION DES ETIQUETTES D IDENTIFICATION EN ZONE SKYDROL out out
IPDA28-07 MARQUAGE DES METAUX DURS AVEC UNE MACHINE LASER CO2 (LASER PART MARKING) NM - Not mandated AC7116 & AC7116/5
IPDA28-08 MARQUAGE A LA FRAPPE CONTROLEE out out
IPDA28-09 MARQUAGE PAR VIBRO GRAVURE OU GRAVURE A L'OUTIL out out
IPDA28-10 MARQUAGE COLLECTEURS PAR MICRO USINAGE out out
IPDA28-11 MARQUAGE PAR MICRO PERCUSSION out out
IPDA33-01 LASER ROUTING & DRILLING OF HARD METAL MATERIALS NM AC7116 & AC7116/4
IPDA33-02 DETOUR/PERCA. JET FLUIDE ABRASIF ALU NM - Not mandated AC7116 & AC7116/7
IPDA33-03 ROUTING OF CARBON COMP. WITH FLUID JET NM - Not mandated AC7116 & AC7116/7
IPDA35-01 FRAISAGE DETOURAGE DES COMPOSITES CARBONE COMP AC7118 PAR
IPDA35-02 FRAISAGE, DETOURAGE DES COMPOSITES A BASE D'ARAMIDE, VERRE ET HYBRIDES COMP AC7118 PAR
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 20
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
IPDA37-04 USINAGE DES COMPOSITES NON STRUCTURAUX COMP AC7118 PAR
IPDA37-05 PERCAGE, ALESAGE, FRAISURAGE DES COMPOSITES CARBONE ET DES EMPILAGES COMPOSITES COMP AC7118 PAR
IPDA37-06 CARBONE/METALLIQUES (HORS CHAPE)
PERCAGE, ALESAGE, FRAISURAGE DES COMPOSITES VERRE, ARAMIDE ET HYBRIDES COMP AC7118 PAR
IPDA37-08 PERC. ORBITAL COMPO OU EMPILAGE COMPOSI out out
IPDA42-00 GENERALITES SUR LE FORMAGE DES TOLES ET DES PROFILES EN ALLIAGE D'ALUMINIUM out out
IPDA42-01 CONFORMAGE PAR GRENAILLAGE ULTRASONS SE - Not mandated AC7117 & AC7117/3
IPDA42-02 FORM PAR PROC GUERIN TOLES ALLIAGE ALU out out
IPDA42-03 FORM A FROID PAR ETIR DES TOLES LAMINEES out out
IPDA42-04 FORM A FRD PAR ETIR PROFIL FILE OU PLIE out out
IPDA42-05 PLIAGE DES TOLES EN ALLIAGE D ALUMINIUM out out
IPDA42-06 EMBREVEMENT POUR FIXATION A TETE FRAISEE ( FRAISURES A 100° ) out out
IPDA42-07 FORMAGE DES PANNEAUX A STRUCTURE INTEGREE EN ALLIAGES D'ALUMINIUM PAR PLIAGES SUCCESSIFS OU out out
IPDA42-08 ENDALLAGE
FORMAGE ET CONFORMAGE PAR GRENAILLAGE SE - Not mandated AC7117 & AC7117/3
IPDA42-09 FORMAGE SUPERPLASTIQUE (SPF) DES ALLIAGES D'ALUMINIUM out out
IPDA42-10 SOYAGE DES PROFILES EN ALLIAGE D'ALUMINIUM out out
IPDA42-11 MISE A ANGLE DES PROFILES EN ALLIAGES D'ALUMINIUM out out
IPDA42-12 FORMAGE PAR ROULAGE DES ALLIAGES D' ALUMINIUM out out
IPDA42-14 FORMAGE A LA PINCE A RETREINDRE DES ALLIAGES D'ALUMINIUM out out
IPDA42-15 PLANAGE DES ALLIAGES D'ALUMINIUM APRES TRAITEMENT THERMIQUE out out
IPDA42-16 ETIRAGE DU TISSU METALLIQUE out out
IPDA42-18 FORMAGE DES COLLETS SUR CONDUIT (PROCEDE ECKOLD) out out
IPDA42-19 FORMAGE ET CONFORMAGE DES ALLIAGES D'ALUMINIUM PAR FLEXION 3 POINTS out out
IPDA42-20 REDRESSAGE DES PIECES MECANIQUES EN METAUX DURS PAR FLEXION 3 POINTS out out
IPDA43-01 FORMAGE A CHAUD DES PIECES EN TITANE ET DE SES ALLIAGES out out
IPDA43-06 FORMAGE SUPERPLASTIQUE (SPF) DES PIECES EN TA6V out out
IPDA44-01 CINTRAGE A CHAUD DES TITANES out out
IPDA44-02 CINTRAGE DES TUYAUTERIES RIGIDES TOUS CIRCUITS out out
IPDA45-01 EXPANSION A FROID DES ALESAGES ET FRAISURES DANS LES ALLIAGES D'ALUMINIUM CORROYES ASA AC7135
IPDA45-03 FORMAGE ET CONFORMAGE PAR GALETAGE DES PIECES ET SOUS- ENSEMBLES EN ALLIAGES D'ALUMINIUM out out
IPDA45-04 REALISATION DES EPANOUIS ET BOURRELETS SUR TUYAUTERIES RIGIDES out out
IPDA45-08 INSTALLATION DE BAGUES DANS DES ALESAGES DE CHAPES METALLIQUES PAR PROCEDE D EXPANSION ASA AC7135 & AC7135/3
IPDA48-00 BUSHLOC
DEFINITIONS ET ARCHITECTURE DOCUMENTAIRE DES COMPOSITES A MATRICE ORGANIQUE out out
IPDA48-01 REGLES GENERALES SUR LES PREIMPREGNES THERMODURCISSABLES EPOXY COMP AC7118 PAR
IPDA48-02 REPARATIONS SIMPLES D'ELEMENTS EN COMPOSITES MONOLITHIQUES out out
IPDA48-03 REPARATION DES COMPOSITES MISE EN EUVRE DES COUPELLES NAS 1169 ET ASN-A0046 out out
IPDA48-04 CONSOLIDAT° PLAQUES THERMOPLASTIQUES out out
IPDA48-05 MEO COMPOS A MATRICES EPOXY PAR PROC RTM COMP AC7118 LRP
IPDA48-12 ESTAMPAGE DES THERMOPLASTIQUES out out
IPDA48-13 FORMAGE A CHAUD DES PREIMP CARB EPOXY COMP AC7118 PAR
IPDA48-17 STOCKAGE, DESTOCKAGE ET MANUTENTION DES PREIMPREGNES POUR AMENAGEMENT COMMERCIAL COMP AC7118 PAR
IPDA48-25 DENSIFICATION DE NID D'ABEILLES NON METALLIQUE POUR APPLICATION STRUCTURALE COMP AC7118 CP
IPDA48-26 FORMAGE COMPOSITE T.P PAR POINCON VESSIE out out
IPDA48-27 CONSOLIDATION PLAQUES T.P. SOUS PRESSE out out
IPDA49-01 FABRICATION DU NID D ABEILLES AERONAUTIQUE EN ALLIAGE D ALUMINIUM COMP AC7118 CP
IPDA49-03 BOBINAGE FIL CARBONE SUR WIRE MESH COMP AC7118 PAR
IPDA50-01 EBAVURAGE MANUEL DES PIECES EN ALLIAGES D ALUMINIUM out out
IPDA50-05 UTILISATION DES HUILES DE COUPE out out
IPDA50-06 GENERALITES USINAGE PAR ACTION MECANIQUE SUR METAUX DURS out out
IPDA50-07 REMPLISSAGE A LA CIRE DES ALVEOLES POUR USINAGE DE LA DEUXIEME FACE DES PIECES METALLIQUES A out out
IPDA50-08 VOILE SUSPENDU
DECAPAGE DES OUTILS D USINAGE DES ALLIAGES D ALUMINIUM out out
IPDA50-09 AJUSTAGE AUTOMATISE PAR USINAGE out out
IPDA51-04 PERCAGE, ALESAGE ORBITAL MATERIAUX METALLIQUES ASA AC7135
IPDA54-01 USINAGE ALLIAGES ALUMINIUM PAR FRAISAGE out out
IPDA55-01 AFFUTAGE DES OUTILSSPECIFIQUES A L USINAGE DES METAUX DURS out out
IPDA55-02 RECTIFICATION DES METAUX DURS out out
IPDA58-01 USINAGE CHIMIQUE DES ALLIAGES ALUMINIUM CP AC7108 & AC7108/5
IPDA58-02 HARD METAL WIRE EDM NM AC7116 & AC7116/3
IPDA61-01 TRAITEMENT THERMIQUE DES ALLIAGES D ALUMINIUM HT AC7102 & AC7102/2
IPDA61-03 TRAITEMENT THERMIQUE DES METAUX DURS HT AC7102
IPDA62-02 OXYDATION ANODIQUE CHROMIQUE DES ALL ALU CP AC7108 & AC7108/8
IPDA62-03 DECAPAGE ALL. ALU. ARDROX & SOCOSURF out out
IPDA62-06 BAIN DE DEGRAISSAGE ALCALIN PH11 CP AC7108
IPDA62-07 BAIN DE DEGRAISSAGE ALCALIN PH9 CP AC7108
IPDA62-08 ACID PICKLING OF ALUMINIUM ALLOYS CP AC7108 & AC7108/12
IPDA62-09 BAIN DE DECAPAGE SODIQUE CP AC7108
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
IPDA62-11 GENERALITES SUR LE DECAPAGECHIMIQUE TITANE CP If performed prior NDT: AC7108 & AC7108/2
IPDA62-12 UTILISATION BAIN O.A.C DES ALL ALUMINIUM CP AC7108 & AC7108/8
IPDA62-13 UTILISATION DU BAIN DE DECAPAGE SULFOCHROMIQUE POUR LE COLLAGE DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/3
IPDA62-14 DEGRAISSAGE ALCALIN PH = 14 CP AC7108
IPDA62-15 NEUTRALISAT° DES ACIERS INOX ET INCONEL CP AC7108 & AC7108/12
IPDA62-16 OXYDATION ANODIQUE TARTRIQUE/SULFURIQUE CP AC7108 & AC7108/8
IPDA62-18 BAIN DE COLMATAGE APRES OXYDATION ANODIQ CP AC7108 & AC7108/8
IPDA62-19 UTILISATION DU BAIN D ALODINE 1200 CP AC7108 & AC7108/11
IPDA62-20 UTILISATION DU BAIN DE DEOXYDINE N° 1 CP AC7108
IPDA62-21 CHROMATATION PAR ALODINE 1200 DES ALLIAGES D ALUMINIUM CP AC7108 & AC7108/11
IPDA62-23 OXYDAT° ANODIQUE SULFURIQUE DES ALL ALU CP AC7108 & AC7108/8
If performed prior Anodizing or Painting or Welding processes: AC7108 & AC7108/12
IPDA62-25 BAIN DE DECAPAGE FLUONITRIQUE DU TITANE CP If performed prior NDT: AC7108 & AC7108/2
IPDA62-27 DECAPAGE ACIER INOX MARTENSITIQUE CP AC7108 & AC7108/12
IPDA62-28 CADMIAGE AU TAMPON DES ACIERS (R <1450 MPA) CP AC7108 & AC7108/13
IPDA62-29 UTIL BAIN PR OXYDAT° ANODIQUE SULFURIQUE CP AC7108 & AC7108/8
IPDA62-30 RETOUCHE PROTECTION PAR CHROMATATION CP AC7108 & AC7108/11
IPDA62-31 NETTOYAGE A L EAU CHAUDE HAUTE PRESSION CP AC7108
IPDA62-32 UTILISAT° SOLVANTS DE NETTOYAGE A FROID CP AC7108
IPDA62-33 DECAPAGE DES PEINTURES PAR AGENTS CHIMIQUES SUR PIECES ELEMENTAIRES EN ALLIAGES D ALUMINIUM CP AC7108 & AC7108/14
IPDA62-36 BAIN SULFO FLUOROFERRIQUE A FROID CP AC7108 & AC7108/12
IPDA62-39 DEGRAISSAGE LESSIVIEL CP AC7108
IPDA62-41 DECAPAGE CHIMIQUE PEINTURES EXTERIEURES CP AC7108 & AC7108/14
IPDA62-42 RAYONNAGE ELECTROCHIMIQUE DES INTERSECTIONS out out
IPDA62-44 BAIN DE DECAPAGE DES ACIERS INOX AUSTENITIQUES CP AC7108 & AC7108/12
IPDA62-45 PASSIVATION DES METAUX DURS CP AC7108 & AC7108/12
IPDA63-01 PROT.DES ACIERS PAR PROJ. A CHAUD D ALU. out out
IPDA63-03 COLLAGE DE BANDES PARAFOUDRE SUR THERMODURCISSABLES/EPOXY out out
IPDA64-01 PREPA DE SURFACE AVT PEINTURE EXT FINALE CP AC7108
IPDA64-02 PEINTURE MANUELLE DES PIECES ELEMENTAIRES METALLIQUES CP AC7108 & AC7108/1
IPDA64-03 PEINTURE EXTERIEURE FINALE DES AVIONS CP AC7108 & AC7108/1
IPDA64-04 PREPARATION DE SURFACE DES COMPOSITES AVANT PEINTURE CP AC7108 & AC7108/1
IPDA64-05 PEINTURE PIECES ELEMENTAIRES COMPOSITES CP AC7108 & AC7108/1
IPDA64-06 APPLICATION PAR PROCEDE ELECTROSTATIQUE DES PEINTURES CP AC7108 & AC7108/1
IPDA64-07 POLYMERISATION ACCELEREE DES PEINTURES CP AC7108 & AC7108/1
IPDA64-08 PEINTURE PIECES D'AMENAGEMENT COMMERCIAL CP AC7108 & AC7108/1
IPDA64-12 APPLICAT° PROD HYDROFUGE & CIRE PROTECT° out out
IPDA64-13 RESTITUTION DE L ETANCHEITE D UNE STRUCTURE SANDWICH PAR COLLAGE D UN FILM TEDLAR out out
IPDA64-14 REVETMT BARRIERE D'ETANCHE - ADAF 473-13 out out
IPDA64-15 PROTECT° ANTI CORROSION LIGNES DE FIXAT° out out
IPDA64-16 MISE EN PLACE DE FILMS ADHESIFS DE REDUCTION DE TRAINEE AERODYNAMIQUE (RIBLET) out out
IPDA64-18 APPLICATION ET ENLEVEMENT DE LA PROTECTION TEMPORAIRE EXTERIEURE AVION out out
IPDA64-20 PREPA DE SURF AV PEINT. COMPO. THER.PLAS CP AC7108 & AC7108/1
IPDA64-21 DECORATION EXTERIEURE AVION PAR FILM AUTO ADHESIF out out
IPDA65-01 PROTECTION TEMPORAIRE ANTI-CORROSION DES ALLIAGES D ALUMINIUM out out
IPDA66-01 GRENAILLAGE DE PRECONTRAINTE DES ALL ALU SE AC7117 & AC7117/3 & AC7117/5
IPDA66-02 REP DEFAUT SUR REVETEMT EXT AVION EN ALU out out
IPDA66-03 TRIBOFINITION DES METAUX DURS out out
IPDA66-04 DECAPAGE PAR PROJECT PARTICULES PLASTIQUES out out
IPDA66-05 TRIBOFINITION SUR ALLIAGES D ALUMINIUM out out
IPDA66-06 SABLAGE A SEC DES METAUX DURS out out
IPDA66-07 EBAVURAGE, CASSAGE D'ANGLE, RAGREAGE DES PIECES EN METAUX DURS out out
IPDA67-01 MISE EN OEUVRE DES LUBRIFIANTS SECS out out
IPDA69-01 UTILISATION DES EAUX out out
IPDA69-02 RETOUCHE PROTEC ANTI-CORROS° INTERIEURES CP AC7108
IPDA69-03 TRAITEMENT DE LA CORROSION DES ALLIAGES D ALUMINIUM SUR CELLULES AVION out out
IPDA71-00 ASSEMBLAGES PAR FIXATIONS MECANIQUES : DEFINITIONS ET ARCHITECTURE DOCUMENTAIRE out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 21
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
IPDA71-03 APPLICATION DES COUPLES DE SERRAGE DE LA BOULONNERIE STANDARD ASA AC7135
IPDA71-05 POSE DES BOULONS DE TRACTION ET DES RONDELLES P.L.I. DANS LES ASSEMBLAGES METALLIQUES ASA AC7135
IPDA71-06 RIVETAGE AUTO STRUCTURES ALU PAR SLUG ASA AC7135 & AC7135/1
IPDA71-07 POSE FIXATIONS LOCKBOLT DANS ASSEMBLAGES DE METAUX DURS ASA AC7135 & AC7135/1
IPDA71-09 POSE FIXAT° TAPERLOK DS ASSEMBLAGE METAL ASA AC7135 & AC7135/1
IPDA71-10 POSE FIXAT° HI LITE DS ASSEMB METALLIQUE ASA AC7135 & AC7135/1
IPDA71-11 POSE FIXAT° LOCKBOLTS MATERIAUX METALLIQ ASA AC7135 & AC7135/1
IPDA71-12 RIVETAGES DES ASSEMBLAGES METALLIQUES ASA AC7135 & AC7135/1
IPDA71-13 MONTAGE DES ECROUS STA-LOK A RESSORT NSA 5063 ASA AC7135 & AC7135/1
IPDA71-14 POSE FIXATIONS AVEUGLES NAS 1919-1921 ASA AC7135 & AC7135/1
IPDA71-15 MONTAGE DES ECROUS PRISONNIERS ASA AC7135
IPDA71-16 POSE DES FIXATIONS AVEUGLES VISU LOK ET JO LOK ASA AC7135 & AC7135/1
IPDA71-17 POSE DES FIXATIONS AVEUGLES AVDEL-MBC DANS DES ASSEMBLAGES METALLIQUES ASA AC7135 & AC7135/1
IPDA71-18 POSE DES FIXATIONS HI LITE PULL STEM ASA AC7135 & AC7135/1
IPDA71-19 MONTAGE DES ECROUS STA-LOK A CLIP NSA 5454 ASA AC7135 & AC7135/1
IPDA71-20 POSE DES FIXATIONS HI-LITE PULL IN ASA AC7135 & AC7135/1
IPDA71-21 POSE FIXATION AVEUGLE ASNA0077-0078 ASA AC7135 & AC7135/1
IPDA71-23 POSE DE VIS DANS ASSEMBLAGE MÉTALLIQUE INSTALLATION OF SCREWS IN METAL ASSEMBLY ASA AC7135 & AC7135/1
IPDA72-01 POSE FIXATION ABS0255 DS ASSEMBL COMPOSI ASA AC7135 & AC7135/1
IPDA72-02 PSE. FIX. AV. MS21140/21141 DS ASS. COMP ASA AC7135 & AC7135/1
IPDA72-04 POSE FIXAT° HUCK COMP DS ASSEMBLAGE COMP ASA AC7135 & AC7135/1
IPDA72-08 POSE DES VIS STANDARD DS ASSEMBL COMPO ASA AC7135 & AC7135/1
IPDA72-10 POSE FIXATION NAS 1919/1921 DS COMPOSITE ASA AC7135 & AC7135/1
IPDA72-11 POSE FIXATIONS AVEUGLES ASNA 0341/0342 ASA AC7135 & AC7135/1
IPDA72-12 POSE FIXATION HILITE DANS ASSEMB. COMPO. ASA AC7135 & AC7135/1
IPDA72-14 PERCAGE ET ASSEMBLAGE DU GLARE ASA or COMP (AC7135 & AC7135/1) or AC7118 PAR
IPDA72-15 ASSEMBL STRUCTURAL DE PREFORME FIBREUSE ASA AC7135
IPDA72-16 GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS ASA AC7135 & AC7135/1
IPDA72-17 INSTALLATION OF LOCKBOLTS PULL AND STUMP TYPES ASA AC7135 & AC7135/1
IPDA72-18 POSE RIVETS ABS 0056 DS ASSEMBLAGE MIXTE ASA AC7135 & AC7135/1
IPDA73-02 SOUDAGE TIG DES METAUX DURS WELD AC7110 & AC7110/5
IPDA73-03 SOUDAGE PAR RESISTANCE (POINT ET MOLETTE) WELD AC7110 & AC7110/4
IPDA73-05 SOUD. FAISC. ELECTRONS DES METAUX DURS WELD AC7110 & AC7110/3
IPDA73-06 SOUDAGE METAUX DURS AVEC MACHINE LASER WELD AC7110 & AC7110/6
IPDA73-07 SOUDOBRASAGE AU CHALUMEAU DES ALLIAGES D ALUMINIUM WELD AC7110 & AC7110/1
IPDA73-12 BRASAGE PAR INDUCT° RACCORD TUYAUT HYDRO WELD AC7110 & AC7110/1
IPDA74-01 SCELLEMENT A FRD BAGUE-ROULEMENT-ROTULE ASA AC7135 & AC7135/3
IPDA74-03 SCELLEMENT BAGUE TITANE DANS COMPOSITE out out
IPDA74-04 RETICULATION D'UN ADHESIF NON SUPPORTE out out
IPDA74-05 ASSEMBLAGE PAR COLLAGE DES COMPOSITES THERMODURCISSABLES EPOXY COMP AC7118 PAR
IPDA74-06 COLLAGE DES SUPPORTS HARNAIS ELECTRIQUES out out
IPDA74-08 COLLAGE DES JOINTS SILICONE SUR THERMOPLASTIQUE P.E.I. PEINT out out
IPDA74-09 COLLAGES NON STRUCTURAUX POUR AMENAGEMENT COMMERCIAL out out
IPDA74-10 MISE EN OEUVRE RESINE DE DENSIFICATION REMPLISSAGE DE ZONES INDRAINABLES out out
IPDA74-11 MISE EN OEUVRE DES ADHESIFS out out
IPDA74-12 CONSTITUT° COUCHE SANDWICH ENTREE D'AIR out out
IPDA75-05 EMMANCHEMENT DE BAGUES MONTEES SERREES ASA AC7135 & AC7135/3
IPDA75-06 MONTAGE ET SERTISSAGE DES ROULEMENTS ET DES ROTULES ASA AC7135 & AC7135/3
IPDA76-01 ASSEMB BANDE SANDWICH ACOUSTIQ ENTR.AIR out out
IPDA76-02 M.E.O. FILM INTUMESCENT SUR STR SANDWICH COMP AC7118 CP
IPDA76-03 REALISATI° ELEM COMP SAND NIDA NON METAL out out
IPDA77-01 DECONGELATION - APPLICATION DES MASTICS ASA AC7135 & AC7135/4
IPDA77-02 INST PLAQUE DE PROTEC DE SEUILS DE PORTE out out
IPDA77-03 MONTAGE DES MEMBRANES VAPOR SEAL SOUPLES out out
IPDA77-04 REMPLISSAGE ALVEOLES DE JONCTION. PIANO out out
IPDA77-06 PREPA-CONGEL-DISTR-CONSERV MASTIC out out
IPDA78-01 MISE EN OEUVRE DES TIMBRES ET RUBANS AUTO-AGRIPPANTS ADHESIFS out out
IPDA79-02 RESINE D'INTERPOSITION -CARTOUCHE DUAL out out
IPDA79-04 UTILISATION DES RHODORSIL CAF out out
IPDA79-05 INSTALLATION D ATTACHES RAPIDES 1/4 DE TOUR ASA AC7135 & AC7135/1
IPDA79-06 FREINAGE PAR FREIN EN TOLE out out
IPDA79-07 FREINAGE PAR FIL FREIN out out
IPDA82-01 SERTISSAGE PAR DUDGEONNAGE out out
IPDA82-02 MONTAGE RACCORDS TYPE out out
IPDA82-03 MONTAGE COMPOSANT POUR DISTRIBUT° HYDRAU out out
IPDA82-04 SERTISSAGE PAR ELASTOMERE out out
IPDA82-05 SERTISSAGE DES RACCORDS RYNGLOK out out
IPDA82-06 SERTISSAGE DES BAGUES PME out out
IPDA82-07 SERTIS RACCORD PERMASWAGE AVEC OUTIL DLT out out
IPDA82-10 ESSAIS EN PRESSION ET DEPOLLUTION DES TUYAUTERIES out out
IPDA83-01 FABRICATION ET INSTALLATION DES CABLAGES ELECTRIQUES out out
IPDA83-02 FRETTAGE DES CABLES PAR NSA 935401 OU NSA 8420 out out
IPDA83-03 CONDUITS METALLIQUES POUR CABLES ELECTRIQUES out out
IPDA83-04 SERTISSAGE OUTILS HYDRAULIQUES MANUELS ET PAR GENERATEUR DE PRESSION out out
IPDA83-05 PRINCIPE D UTILISATION DES PINCES A SERTIRMANUELLES : M 22520, MS 3198, MS 3191 out out
IPDA83-06 COUPLES DE SERRAGE SUR MATERIELS ELECTRIQUES out out
IPDA83-07 DENUDAGE DES CABLES ELECTRIQUES out out
IPDA83-08 GAINES ET MANCHONS THERMORETRACTABLES out out
IPDA83-09 REPRISES DE BLINDAGE PAR FERRULES MECANIQUES out out
IPDA83-10 MEO ARRET DE BLINDAGE SUR CABLES ELECTR out out
IPDA83-100 ASSEM. ET RACC. DES BARRETTES A BORNES out out
IPDA83-101 M.E.O DU CONNECTEUR ABS 0057 out out
IPDA83-102 COSSE ASNE0348 out out
IPDA83-103 INSERTION ET EXTRACTION DES CONTACTS out out
IPDA83-104 M.E.O. DES TRAVERSES ETANCHES ABS1378 out out
IPDA83-105 DENUDAGE DES CABLES ABS0949 & EN2267 DR out out
IPDA83-106 MEO CONT. ABS1055/1056 AVEC CABLE EN4604 out out
IPDA83-108 MEO CONNECT ASNE0354 out out
IPDA83-11 MISE A LA MASSE ET METHODE DE METALLISATION out out
IPDA83-12 MODULE DE MISE A MASSE ASNE0425/ABS1599 out out
IPDA83-13 GAINES TEXTILES POUR PROTECT° CABLE ELEC out out
IPDA83-14 ASSEMBLAGE ET RACCORDEMENT DES BARRETTES A MODULES out out
IPDA83-15 REPRISES DE BLINDAGES PAR MANCHONS AUTOSOUDEURS ASNE0720 ET NSA 937790 out out
IPDA83-16 REPRISE DE BLINDAGE PAR MANCHON ASNE0160 out out
IPDA83-17 DRAINAGE GAINES PLASTIQUES out out
IPDA83-18 CONNECT RECTANGULAIRE ASNE0390 OU EN3545 out out
IPDA83-19 IDENTIFICATION ET REPERAGE SUR INSTALLATIONS ELECTRIQUES out out
IPDA83-20 TRAVERSEES ELECTRIQUES COMPOUNDEES NSA 934710 out out
IPDA83-21 MARQUAGE DES CABLES ELECTRIQUES PAR FRAPPE A CHAUD out out
IPDA83-22 DOUILLES ASNE0252 ET EN 3155-017F out out
IPDA83-23 COSSES NSA 936501 out out
IPDA83-24 RACCORDS CABLES NSA936808 & NSA936809 out out
IPDA83-25 COSSES NSA 936507 out out
IPDA83-26 RACCORDS BOUT A BOUT ASNE0360 out out
IPDA83-27 EMBOUTS ISOLANTS NSA936601 & NSA936604 out out
IPDA83-28 RACCORDS BOUT A BOUT NSA 936803 out out
IPDA83-29 COSSES ASNE0422 POUR CABLE ALUMINIUM out out
IPDA83-30 COSSES ALUMINIUM ASNE0466 POUR CABLES ALUMINIUM out out
IPDA83-31 RACCORDS BOUT A BOUT NSA 936813 PR CABLES out out
IPDA83-32 COSSES ASNE0223 POUR CABLES ALUMINIUM out out
IPDA83-33 MANCHONS NSA 937201 ETIQUETTES ASNE0248 ET ASNE0470 out out
IPDA83-34 FABRICATION ET POSE ETIQUETTES D IDENT. out out
IPDA83-35 ETIQUETTES ADHESIVES DANS NSA 931026 out out
IPDA83-36 CONTACT EN3155-03F/08M/14M/15F/70M/71F out out
IPDA83-37 INDIC LUMINEUX CARRES & TETES DE VOYANTS out out
IPDA83-38 INDIC.LUM.DE CDE. ASN E0415 ET ABS0951 out out
IPDA83-39 MONTAGE INDICATEURS LUMINEUX DE COMMANDE out out
IPDA83-40 CONNEC ASNE0086/0145/0146/0147/0726/0729 out out
IPDA83-41 MEO CNCTR EN3646 ASNE0052/53 & ABS1425 out out
IPDA83-42 CONT. EN3155-016M (NSA937910) ET ABS1493 out out
IPDA83-43 CONNECT DE RACK ASNE0161/163/165 ABS0831 out out
IPDA83-44 CONNEC EN 6047-003/004 (ASNE0098/0378) out out
IPDA83-45 CONNECTEURS COAXIAUX TYPE BNC - NSA 938601 out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 22
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
IPDA83-46 CONNECTEURS COAXIAUX TYPE TNC NSA 938621 out out
IPDA83-47 CONNECTEURS COAXIAUX TYPE N NSA 938641 out out
IPDA83-48 CONNECTEURS COAXIAUX TYPE C - NSA 938661 out out
IPDA83-49 CONNECTEURS COAXIAUX TYPE BNC ASNE0460 out out
IPDA83-50 CONNECTEURS COAXIAUX TYPE TNC ASNE0461 out out
IPDA83-51 CONNECTEURS COAXIAUX TYPE N ASNE0462 out out
IPDA83-52 CONNECTEURS COAXIAUX TYPE C ASNE0463 out out
IPDA83-53 CONNECTEURS COAXIAUX ASNE0295 ET MISE A LA MASSE AVEC COSSE ASNE0296 out out
IPDA83-54 CONNECTEURS ASNE0077 - ASNE0079 ET ASNE0110 out out
IPDA83-55 CNCTR ASNE0684/734/756/NSA938026/ABS1495 out out
IPDA83-56 CONNECTEURS ELECTRIQUES ASNE0093 ET ASNE0094 out out
IPDA83-57 CONNECTEURS ASNE0076 ET ASNE0150 out out
IPDA83-58 CONNECTEUR ASNE0511 out out
IPDA83-59 CONNECTEURS ABS 0364 out out
IPDA83-60 CONNECTEURS ASNE0186 & 0187 & 0195 & 0197 ET 0579 out out
IPDA83-61 MISE EN OEUVRE DES DIODES ET DES RESISTANCES SUR CONNECTEUR NSA 938361 out out
IPDA83-62 CNCTR NSA938361 ASNE0362 ABS0713 ABS1145 out out
IPDA83-63 CONNECTEURS ASNE0087 ET ASNE0097 (ANCIENNEMENT NSA 938341 ET NSA 938346) out out
IPDA83-64 NETTOYAGE CABLE ET COMPOSANT ELECTRIQUE out out
IPDA83-65 M.E.O. CONNECTEURS EN 2997 out out
IPDA83-66 CONTACTS FEMELLES ASNE0078 out out
IPDA83-67 CONNECTEURS ASNE0237 ET ASNE0302 out out
IPDA83-68 CONNECTEURS COAXIAUX NSA 938603, NSA 938604, NSA 938608 out out
IPDA83-69 CONNECTEUR MINIATURE COAXIAL ASNE0180 out out
IPDA83-70 COSSES PLATES TYPE CLIPS ASN-E0256 out out
IPDA83-71 COSSES DRAPEAUX NSA 936505 out out
IPDA83-72 FIXATION CABLAGE DANS SERRE-CABLES CONNECTEUR out out
IPDA83-73 CONNECTEURS RECTANGULAIRES ASN-E0366 out out
IPDA83-74 COSSES PLATES out out
IPDA83-75 MISE EN OEUVRE EXTREMITE CABLES SPECIAUX out out
IPDA83-76 COSSES NSA 936503 out out
IPDA83-77 COSSES A FOURCHE RECTANGULAIRE NSA 936510 out out
IPDA83-78 CONNECTEUR COAXIAL ASN-E0294 out out
IPDA83-79 CONNECTEURS ELECTRIQUES NSA 938925 out out
IPDA83-80 CONNECTEURS ASN-E0007 out out
IPDA83-81 CONNECTEURS ELECTRIQUES ASN-E0111 ET ASN-E0233 out out
IPDA83-82 FERRULES MECANIQUES NSA 937504 out out
IPDA83-85 BRASAGE DES CONNEXIONS ELECTRIQUES out out
IPDA83-86 TRAVERSEES DE CLOISON ASNE0073 out out
IPDA83-87 TRAVERSEES ELECTRIQUES COMPOUNDEES ABS 0122 out out
IPDA83-88 MARQUAGE DES CABLES ELECTRIQUES AERONAUTIQUES PAR LASER CO2 (CABLE PART MARKING) out out
IPDA83-89 COSSES PLATES out out
IPDA83-90 INSTALLATION CABLE OPTIQUE out out
IPDA83-91 CONTACT ET HARNAIS FIBRE OPTIQUE out out
IPDA83-92 MISE EN OEUVRE DES CONTACTS QUADRAX out out
IPDA83-94 M.E.O CONTACTS OPTIQUES ABS1379-003 out out
IPDA83-95 M.E.O.CONT ABS1380/1381 CÂB ALU #24 À 12 out out
IPDA83-96 M.E.O.CONT ABS1380/1381 CAB ALU #10 À 04 out out
IPDA83-97 USE OF CONTACTS ABS1344/1403 WITH # 04 TO 12 CU CABLE out out
IPDA83-98 M.E.O. DU BUS CAN out out
IPDA83-99 RACCORDS BOUT A BOUT ASNE 0541 out out
IPDA85-02 SERTISSAGE DES RACCORDS POUR CIRCUITS out out
IPDA85-03 MONTAGE DES TUYAUTERIES CARBURANT - VACUUM - CIRCUITS SECONDAIRES out out
IPDA85-05 PRECAUTIONS A PRENDRE LORS DES TRAVAUX DANS LES RESERVOIRS CARBURANT out out
IPDA86-01 MONTAGE TUYAUTERIE CONDITIONNEMENT D'AIR out out
IPDA86-02 SERTISSAGE DES RACCORDS QUINSON ASNA2142 ET ASNA2373 out out
IPDA88-01 MONTAGE TUYAUTERIES POUR CIRCUIT OXYGENE out out
IPDA88-02 SERTISSAGE DES RACCORDS DEUTSCHLITE out out
IPDA89-01 NETTOYAGE ET CONDITIONNEMENTDES RACCORDS DEMONTABLES out out
IPDA89-02 IMMOBILISATION EN TRANSLATION DES AXES DES CHARNIERES out out
ISO10364 STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTICOMPONENT ADHESIVES CP AC7108 & AC7108/4
ISO11554 OPTICS AND PHOTONICS LASERS AND LASER-RELATED EQUIPMENT TEST METHODS FOR LASER BEAM POWER, out out
ISO1463 ENERGY
METALLICAND
ANDTEMPORAL CHARACTERISTICS
OXIDE COATINGS - MEASUREMENT OF COATING THICKNESS - MICROSCOPICAL METHOD CP AC7108 & AC7108/4
ISO1518 PAINTS AND VARNISHES - SCRATCH TEST CP AC7108 & AC7108/4
ISO1519 PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) CP AC7108 & AC7108/4
ISO16810 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES NDT AC7114 & AC7114S & AC7114/3
ISO2106 ANODIZING OF ALUMINIUM AND ITS ALLOYS - DETERMINATION OF MASS PER UNIT AREA (SURFACE DENSITY) OF MTL AC7101 & AC7101/2
ISO2143 ANODIC OXIDATION
ANODIZING COATINGS
OF ALUMINIUM AND- ITS
GRAVIMETRIC METHOD OF LOSS OF ABSORPTIVE POWER OF ANODIC
ALLOYS - ESTIMATION CP AC7108 & AC7108/4
ISO2178 OXIDATION COATINGS
NON-MAGNETIC AFTER
COATINGS ONSEALING
MAGNETIC - DYE-SPOT TEST-WITH
SUBSTRATES PRIOR ACIDOF
MEASUREMENT TREATMENT
COATING THICKNESS - MAGNETIC CP AC7108 & AC7108/4
ISO2360 METHOD
NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASIS MATERIALS - CP AC7108 & AC7108/4
ISO2409 MEASUREMENT
PAINTS OF COATING
AND VARNISHES THICKNESS
- CROSS-CUT TEST- AMPLITUDE-SENSITIVE EDDY CURRENT METHOD CP AC7108 & AC7108/4
ISO2808 PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS CP AC7108 & AC7108/4
ISO2812-1 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER CP AC7108 & AC7108/4
ISO2812-2 THAN
PAINTSWATER
AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD CP AC7108 & AC7108/4
ISO2813 PAINTS AND VARNISHES - DETERMINATION OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20°, 60° AND CP AC7108 & AC7108/1
ISO4287 85°
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS out out
ISO4288 AND SURFACE TEXTURE
GEOMETRICAL PRODUCTPARAMETERS
SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND out out
ISO4516 PROCEDURES
METALLIC AND FOR THEINORGANIC
OTHER ASSESSMENT OF SURFACE
COATINGS TEXTURE
- VICKERS AND KNOOP MICROHARDNESS TESTS MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ISO4624 PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION CP AC7108 & AC7108/4
ISO4628-2 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE CP AC7108 & AC7108/4
ISO643 OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES
STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT IN APPEARANCE
GRAIN SIZE - PART 2: ASSESSMENT OF DEGREE OF MTL AC7101 & AC7101/4
ISO6506 BLISTERING
METALLIC MATERIALS - BRINELL HARDNESS TEST MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ISO6507 VICKERS HARDNESS TEST MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ISO6508 ROCKWELL HARDNESS TEST MTL or HT (AC7101 & AC7101/5) or (AC7102 & AC7102/5)
ISO9227 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS CP AC7108 & AC7108/4
NASM1312-12 FASTENER TEST METHODS - METHOD 12: THICKNESS OF METALLIC COATINGS MTL AC7101 & AC7101/11
QVA-Z09-18-00 PENETRANT TESTING NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
QVA-Z09-18-01 PENETRANT TESTING NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
QVA-Z09-18-03 PENETRANT TESTING NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
QVA-Z10-03-00 ULTRASONIC RESONANCE IMPEDANCE INSPECTION USING FOKKER BOND TESTER out out
QVA-Z10-37-00 TENSILE TESTING AT AMBIENT TEMPERATURE MTL AC7101 & AC7101/3
QVA-Z10-37-01 STANDARD TEST METHOD OF COMPRESSION TESTING OF METALLIC MATERIALS AT ROOM TEMPERATURE MTL AC7101 & AC7101/3
QVA-Z10-37-04 STANDARD TEST METHOD FOR SHEAR TESTING OF ALUMINIUM ALLOYS MTL AC7101 & AC7101/3
QVA-Z10-37-05 STANDARD TEST METHOD FOR PIN-TYPE BEARING TEST OF METALLIC MATERIALS MTL AC7101 & AC7101/3
QVA-Z10-37-06 T-TYPE TENSILE TEST ON WELDED JOINTS MTL AC7101 & AC7101/3
QVA-Z10-39-02 R-CURVE ON SHEET MATERIAL MTL AC7101 & AC7101/3
QVA-Z10-39-03 STANDARD TEST METHOD FOR PLAIN STRAIN FRACTURE TOUGHNESS OF METALLIC MATERIALS MTL AC7101 & AC7101/3
QVA-Z10-39-04 FATIGUE CRACK PROPAGATION ON SHEET MATERIAL MTL AC7101 & AC7101/3
QVA-Z10-41-00 METALLIC MATERIALS - BRINELL HARDNESS TEST MTL AC7101 & AC7101/5
QVA-Z10-42-00 METALLIC MATERIALS - VICKERS HARDNESS TEST MTL AC7101 & AC7101/5
QVA-Z10-43-00 METALLIC MATERIALS - ROCKWELL HARDNESS TEST MTL AC7101 & AC7101/5
QVA-Z10-46-01 STRUCTURAL ADHESIVES, TENSILE SINGLE LAP SHEAR NMMT AC7122 & AC7122/1
QVA-Z10-46-03 STRUCTURAL ADHESIVES, SINGLE LAP SHEAR NMMT AC7122 & AC7122/1
QVA-Z10-46-04 STRUCTURAL ADHESIVES, METAL-HONEYCOMB- CORE FLATWISE TENSILE TEST NMMT AC7122 & AC7122/1
QVA-Z10-46-05 STRUCTURAL ADHESIVES, PEELING TEST, METAL HONEYCOMB-CORE, DRUM PEEL TEST NMMT AC7122 & AC7122/1
QVA-Z10-46-09 DETERMINATION OF TENSILE LAP SHEAR STRENGTH OF COMPOSITE JOINTS NMMT AC7122 & AC7122/1
QVA-Z10-46-10 GALSS-FIBRE REINFORCED PLASTICS, DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH NMMT AC7122 & AC7122/1
QVA-Z10-46-22 FIBRE REINFORCED PLASTICSDETERMINATION OF IN-PLANE-SHEAR PROPERTIES NMMT AC7122 & AC7122/1
QVA-Z10-46-24 CARBON FIBRE REINFORCED PLASTICS, COMPRESSION TEST PARALLEL TO FIBRE DIRECTION, LOAD NMMT AC7122 & AC7122/1
QVA-Z10-46-26 INTRODUCTION BY SHEAR
TAP-TEST out out
QVA-Z10-46-34 CARBON FIBRE REINFORCED PLASTICS, TENSILE TEST PARALLEL TO FIBRE DIRECTION NMMT AC7122 & AC7122/1
QVA-Z10-46-35 CARBON FIBRE REINFORCED PLASTICS, TENSILE TEST PARALLEL TO FIBRE DIRECTION NMMT AC7122 & AC7122/1
QVA-Z10-46-36 CARBON FIBRE REINFORCED PLASTICS, TENSILE TEST PARALLEL TO FIBRE DIRECTION NMMT AC7122 & AC7122/1
QVA-Z10-46-37 CARBON FIBRE REINFORCED PLASTICS, COMPRESSION TEST PARALLEL TO FIBRE DIRECTION, LOAD NMMT AC7122 & AC7122/1
QVA-Z10-46-38 INTRODUCTION
CARBON BY SHEAR
FIBRE REINFORCED PLASTICS, COMPRESSION TEST PARALLEL TO FIBRE DIRECTION, LOAD NMMT AC7122 & AC7122/1
QVA-Z10-46-43 INTRODUCTION
FIBRE BY SHEAR
REINFORCED PLASTICS DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY MODE I NMMT AC7122 & AC7122/1
QVA-Z10-49-00 MAGNETIC PARTICLES INSPECTION NDT AC7114 & AC7114S & AC7114/2 & AC7114/2S
QVA-Z10-50-01 DETERMINATION OF ELECTRICAL CONDUCTIVITY OF NON-FERROMAGNETIC MATERIALS HT AC7102 & AC7102/5
QVA-Z10-52-02 ULTRASONIC RESONANCE IMPEDANCE INSPECTION USING FOKKER BOND TESTER out out
QVA-Z10-52-03 ULTRASONIC INSPECTION OF TI 3AL 2,5V SEAMLESS TUBING FOR HYDRAULIC SYSTEMS, COLD WORKED AND NDT AC7114 & AC7114S & AC7114/3 & AC7114/3S
QVA-Z10-52-04 STRESS
NDT RELIEVED
IMPEDANCE INSPECTION OF CFRP FLOOR PANELS out out
QVA-Z10-52-05 REFERENCE STANDARDS FOR NON DESTRUCTIVE INSPECTION METHODS ON FIBER COMPOSITES out out
QVA-Z10-52-06 REFERENCE STANDARDS FOR NON DESTRUCTIVE INSPECTION METHODS ON FIBER COMPOSITES out out
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 23
Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table
issued June 18, 2021
Sorted by Airbus Specification Reference
Foreword:
This table is given for information only and shall not be considered as a reference.
It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus.
Nadcap Commodities mandated by Airbus are:
Since 2004:
COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating
Since 2005:
CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing
Since 2009:
NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding
Since 2012:
NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material)
Since 2016:
NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings)
Since 2017:
WLD = Welding (Additive Manufacturing)
Since 2019:
ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems
Changes from previous version dated May 14, 2021 are highlighted in Yellow
Airbus Specification
Specification Designation Nadcap Commodity Audit Criteria
Reference
QVA-Z10-52-07 REFERENCE STANDARDS FOR NON DESTRUCTIVE INSPECTION METHODS ON FIBER COMPOSITES out out
QVA-Z10-52-09 ULTRASONIC TESTING OF LASER BEAM WELDED STRINGER-SKIN JOINTS out out
QVA-Z10-52-10 REFERENCE STANDARDS FOR NON DESTRUCTIVE INSPECTION METHODS ON FIBER COMPOSITES out out
QVA-Z10-52-11 ULTRASONIC THROUGH TRANSMISSION OF GLARE LAMINATE IN SQUIRTER TECHNIQUE out out
QVA-Z10-52-12 INSPECTION OF ADHESIVE BONDED GLARE WITH THE FOKKER BOND TESTER out out
QVA-Z10-55-00 PENETRANT TESTING NDT AC7114 & AC7114S & AC7114/1 & AC7114/1S
QVA-Z10-56-00 RADIOGRAPHIC INSPECTION-GENERAL NDT AC7114 & AC7114S & AC7114/4 & AC7114/4S
QVA-Z10-59-01 SALT SPRAY TEST CP AC7108 & AC7108/4
QVA-Z10-89-01 TAP-TEST out out
QVA-Z11-01-06 DETERMINATION OF ELECTRICAL CONDUCTIVITY OF NON-FERROMAGNETIC MATERIALS HT AC7102 & AC7102/5
QVA-Z11-01-07 INSPECTION OF ADHESIVE BONDED GLARE WITH THE FOKKER BOND TESTER out out
QVA-Z11-01-08 CLADDING THICKNESS MEASUREMENT out out
SAE AMS2630 RBY HIGH FREQUENCY
INSPECTION, EDDY CURRENT
ULTRASONIC PRODUCT OVER 0.5 INCH (12.7 MM) THICK. NDT AC7114 & AC7114S & AC7114/3
SAE AMS2631 R ULTRASONIC INSPECTION TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE NDT AC7114 & AC7114S & AC7114/3
AMS2300 MAGNETIC PARTICLE INSPECTION PROCEDURE FOR FERROMAGNETIC STEELS NDT AC7114 & AC7114S & AC7114/2
AMS2301 MAGNETIC PARTICLE INSPECTION PROCEDURE FOR FERROMAGNETIC STEELS, OTHER THAN HARDENABLE CORROSION RESISTANT
NDT STEELS AC7114 & AC7114S & AC7114/2
AMS2303 MAGNETIC PARTICLE INSPECTION PROCEDURE FOR MARTENSITIC CORROSION RESISTANT STEEL NDT AC7114 & AC7114S & AC7114/2
Airbus Specification / Nadcap Commodity Cross Table First Issue dated on June 1st, 2010 24
You might also like
- Trakpactor 320SR Illustrated Parts Catalog - Revision 6 - 8No ratings yetTrakpactor 320SR Illustrated Parts Catalog - Revision 6 - 8999 pages
- Plastic piping handbook Willoughby Woodson Sutherland 2002No ratings yetPlastic piping handbook Willoughby Woodson Sutherland 2002359 pages
- 684 Illustrated Parts Catalog - Revision 4.4 From Serial No. TRX01684CDGI26281No ratings yet684 Illustrated Parts Catalog - Revision 4.4 From Serial No. TRX01684CDGI26281585 pages
- MP-6 Sonixs 1000 X 800 Manual 2014 Rev A PDF33% (3)MP-6 Sonixs 1000 X 800 Manual 2014 Rev A PDF190 pages
- 694+ Illustrated Parts Catalog Revision 3.1 FROM SERIAL TRX01694CDGL11965No ratings yet694+ Illustrated Parts Catalog Revision 3.1 FROM SERIAL TRX01694CDGL11965549 pages
- Industrial Valves & Fittings Wholesale Revenues World Summary: Market Values & Financials by CountryFrom EverandIndustrial Valves & Fittings Wholesale Revenues World Summary: Market Values & Financials by CountryNo ratings yet
- Parts List D(V)AH132-´+ê1.8~2.0MPa´+ë_EnNo ratings yetParts List D(V)AH132-´+ê1.8~2.0MPa´+ë_En17 pages
- Semiconductor & Electronic Components World Summary: Market Values & Financials by CountryFrom EverandSemiconductor & Electronic Components World Summary: Market Values & Financials by CountryNo ratings yet
- Communication & Energy Wire & Cables World Summary: Market Values & Financials by CountryFrom EverandCommunication & Energy Wire & Cables World Summary: Market Values & Financials by CountryNo ratings yet
- Commercial & Industrial Machinery & Equipment Repair Revenues World Summary: Market Values & Financials by CountryFrom EverandCommercial & Industrial Machinery & Equipment Repair Revenues World Summary: Market Values & Financials by CountryNo ratings yet
- Oil Well, Refinery Machinery & Equipment Wholesale Revenues World Summary: Market Values & Financials by CountryFrom EverandOil Well, Refinery Machinery & Equipment Wholesale Revenues World Summary: Market Values & Financials by CountryNo ratings yet
- Air Brakes (C.V. OE & Aftermarket) World Summary: Market Values & Financials by CountryFrom EverandAir Brakes (C.V. OE & Aftermarket) World Summary: Market Values & Financials by CountryNo ratings yet
- Commercial & Industrial Equipment Repair & Maintenance Revenues World Summary: Market Values & Financials by CountryFrom EverandCommercial & Industrial Equipment Repair & Maintenance Revenues World Summary: Market Values & Financials by CountryNo ratings yet
- DCP7010 MFC7420 y MFC7820N Manual PartesNo ratings yetDCP7010 MFC7420 y MFC7820N Manual Partes31 pages
- Pumps & Compressors World Summary: Market Values & Financials by CountryFrom EverandPumps & Compressors World Summary: Market Values & Financials by Country5/5 (1)
- Metal Valves World Summary: Market Values & Financials by CountryFrom EverandMetal Valves World Summary: Market Values & Financials by CountryNo ratings yet
- Vdocuments - MX - Customer Specification Specification Specification Specification Name Revision50% (2)Vdocuments - MX - Customer Specification Specification Specification Specification Name Revision67 pages
- Engineering Service Revenues World Summary: Market Values & Financials by CountryFrom EverandEngineering Service Revenues World Summary: Market Values & Financials by CountryNo ratings yet
- Arm256 M257 M258 M316 M317 M318 5625 X 5631 X - SM - GBNo ratings yetArm256 M257 M258 M316 M317 M318 5625 X 5631 X - SM - GB158 pages
- Manual de Peças - DCP7020 - MFC7420 - MFC7820NNo ratings yetManual de Peças - DCP7020 - MFC7420 - MFC7820N30 pages
- DCP-8070D-8080-8085 - MFC-8370D-8380-8480-8880-8890 PartsNo ratings yetDCP-8070D-8080-8085 - MFC-8370D-8380-8480-8880-8890 Parts39 pages
- Airbus Specification Nadcap Commodity CrossTable PDFNo ratings yetAirbus Specification Nadcap Commodity CrossTable PDF21 pages
- Airbus Specification - Nadcap Commodity - Cross Table - 05 March 20190% (1)Airbus Specification - Nadcap Commodity - Cross Table - 05 March 201922 pages
- Parts Reference List: Model: DCP-8070D MFC-8370DN / MFC-8380DNNo ratings yetParts Reference List: Model: DCP-8070D MFC-8370DN / MFC-8380DN36 pages
- Parts Reference List: Model: DCP-9045CDN / MFC-9840CDWNo ratings yetParts Reference List: Model: DCP-9045CDN / MFC-9840CDW40 pages
- 03-931027-XX. 4000 external source heaterpdfNo ratings yet03-931027-XX. 4000 external source heaterpdf5 pages
- Airbus Specification Nadcap Commodity CrossTableNo ratings yetAirbus Specification Nadcap Commodity CrossTable21 pages
- 12-00007WD - D - Garmin G950 System InterfaceNo ratings yet12-00007WD - D - Garmin G950 System Interface12 pages
- REVISION: AN: Airbus - Maintained Specification ReportNo ratings yetREVISION: AN: Airbus - Maintained Specification Report9 pages
- Parts Reference List: Model: DCP-9010CN / MFC-9010CN MFC-9120CN / MFC-9320CWNo ratings yetParts Reference List: Model: DCP-9010CN / MFC-9010CN MFC-9120CN / MFC-9320CW39 pages
- Parts Reference List: Model: DCP-8080DN / DCP-8085DN / MFC-8480DN / MFC-8880DN / MFC-8890DWNo ratings yetParts Reference List: Model: DCP-8080DN / DCP-8085DN / MFC-8480DN / MFC-8880DN / MFC-8890DW37 pages
- Optical - Airbus-Nadcap-Cross-Table-December-11-2012 PDFNo ratings yetOptical - Airbus-Nadcap-Cross-Table-December-11-2012 PDF26 pages
- Parts Reference List: Model: DCP-8080DN / DCP-8085DN / MFC-8480DN / MFC-8680DN / MFC-80D: /MFC-888DN MFC-88 D1+ 0) &'No ratings yetParts Reference List: Model: DCP-8080DN / DCP-8085DN / MFC-8480DN / MFC-8680DN / MFC-80D: /MFC-888DN MFC-88 D1+ 0) &'40 pages
- Brother Fax Machine DCP8040 Service ManualNo ratings yetBrother Fax Machine DCP8040 Service Manual36 pages
- Ice Machine Parts List For Series EC065 Models: ECG065A ECS065A ECM065A ECG065W ECS065W ECM065WNo ratings yetIce Machine Parts List For Series EC065 Models: ECG065A ECS065A ECM065A ECG065W ECS065W ECM065W8 pages
- Zincalume Steel 55% AL ZN Vs Galvanised SteelNo ratings yetZincalume Steel 55% AL ZN Vs Galvanised Steel16 pages
- 09 66 13 Portland Cement Terrazzo FlooringNo ratings yet09 66 13 Portland Cement Terrazzo Flooring9 pages
- Complete Set - ASTM Series - All Sections and Volumes25% (4)Complete Set - ASTM Series - All Sections and Volumes5 pages
- Cement and Concrete: Hera - Mae Granada AnoraNo ratings yetCement and Concrete: Hera - Mae Granada Anora17 pages
- Chemical Composition and Mechanical Properties of Steel (Indian Standard)No ratings yetChemical Composition and Mechanical Properties of Steel (Indian Standard)6 pages
- Checklist Pemeriksaan Fisik Pekerjaan Pelebaran Dermaga C1 Pelabuhan PanjangNo ratings yetChecklist Pemeriksaan Fisik Pekerjaan Pelebaran Dermaga C1 Pelabuhan Panjang6 pages
- 1.1 Stress-Strain Curves 1.2 Definition and Classes: Hard ToughNo ratings yet1.1 Stress-Strain Curves 1.2 Definition and Classes: Hard Tough6 pages
- DFTTB-000 Delfleet Evolution Technical Data Sheet Index 03112020 FinalNo ratings yetDFTTB-000 Delfleet Evolution Technical Data Sheet Index 03112020 Final2 pages
- Pricelist Harga Rockwool Dan Glasswool: No Nama Barang Harga (RP) SatuanNo ratings yetPricelist Harga Rockwool Dan Glasswool: No Nama Barang Harga (RP) Satuan2 pages
