COLLEGE OF COMPUTER STUDIES AND MULTIMEDIA ARTS

CCS0001L
(INTRODUCTION TO COMPUTING)

EXERCISE

5
OPERATING SYSTEMS
(MS DOS Commands and MS Windows Basic Operations)

Student Name / Group

Name: Mark Joshua B. Agraan
Name Role
‍
Members (if Group):
‍
‍
DB01
Section:

Professor:
Sir Vern
I. PROGRAM OUTCOME/S (PO) ADDRESSED BY THE LABORATORY EXERCISE
 Apply knowledge through the use of current techniques and tools necessary for the IT profession [PO: I]

II. COURSE LEARNING OUTCOME/S (CLO) ADDRESSED BY THE LABORATORY EXERCISE

 To select and use appropriate techniques and modern computing tools for computing activities. [CLO: 3]

III. INTENDED LEARNING OUTCOME/S (ILO) OF THE LABORATORY EXERCISE

At the end of this exercise, students must be able to:

 Understand the basic concepts of operating systems.
 Use the Windows operating system.
 Perform basic tasks specific to Windows operating system.
 Identify the system and hardware specifications of the computer.
 Execute MS DOS commands to perform specific tasks.

IV. BACKGROUND INFORMATION

Windows is the most common operating system used for PCs. It is essential that you familiarize yourself with the
basic functionality of this OS.

It is necessary that you are aware of the hardware components of your computer. While the operating system
usually takes care of the complexity of managing the hardware components of your computer system,
knowledge on hardware specifications helps when you have to:

1) Install an operating system

2) Upgrade your computer system
3) Diagnose and repair problems in your computer system

On the other hand, many of you may not have spent very much time at the Windows Command Line. Some of
you may think it’s obsolete. Command line interfaces are still with us and are likely to remain for quite some
time.

CCS0001L – Introduction to Computing Page 2 of 16

 This lab activity will help you become more familiar with the Windows operating system environment. It will also
help you learn and understand MS DOS commands needed to perform specific tasks using the Command Line
Interface.

V. LABORATORY ACTIVITY
IMPORTANT NOTE BEFORE DOING THIS ACTIVITY: To ensure safety of your own devices, proceed
to our Information Technology Services Office (ITSO) Virtual Office (you can find it in your dashboard, if
not, you can see it in the Courses page on your Canvas) and request for a remote access to our
computer laboratory facilities. Make sure to type the commands as stated.

TASK 1: FAMILIARIZATION WITH WINDOWS OPERATING SYSTEMS BASIC TASKS (PASTE A

SCREEN SHOT/S OF EVERY INSTRUCTION)

1. Copying/ pasting a file [select a file, right click> copy; go to the directory to paste into, right click >
paste]

2. Creating a new file [hint: right click > new > file type]

CCS0001L – Introduction to Computing Page 3 of 16

 3. Creating a new folder [hint: right click > new > folder]

4. Deleting a file [hint: select a file, right click > delete]

CCS0001L – Introduction to Computing Page 4 of 16

 5. Finding how to find Windows help [hint: click on Windows Start button, and then type Get Help,
look for any help topic]

TASK 2: CHECK THE SPECIFICATIONS OF ALL HARDWARE CURRENTLY INSTALLED IN YOUR

COMPUTER (TYPE WHAT IS ASKED IN A TABLE)

1. Open Windows Explorer then right click on the This PC from the left pane and then click on
Properties. Note down the specifications of the PC you are working on.

CCS0001L – Introduction to Computing Page 5 of 16

 2. On the properties window, click on Device Manager. Note down all information about hardware
devices.

TASK 3: FAMILIARIZATION WITH MS DOS COMMAND LINE INTERFACE COMMANDS (PASTE

SCREEN SHOTS OF WHAT YOU DID IN EVERY ITEM, OR TYPE ANSWER TO ITEMS THAT
NEEDS ANSWERS)

1. Run your command prompt program. Create a new directory [or folder] by typing the following
command. MD is the command, C: is the drive, and new is the name of the folder. The backslash
[\] indicates that the new folder will be created in the root directory of the c: drive.

CCS0001L – Introduction to Computing Page 6 of 16

 md c:\new

Nearly all commands use the same kind of syntax, the command name followed by one or more
arguments. You can get information about how to use the command by using the command name
followed by /? [for example, md /?].

Use the md command to create these directories also:

c:\new\data

c:\new\programs

c:\new\utility

c:\new\data\stuff

CCS0001L – Introduction to Computing Page 7 of 16

 c:\new\data\letters

2. Use the cd [change directory] command to move within the directories you have created. Check
out the /? Information about the cd command.

What does the cd.. and cd\ options do.

Displays the name of or changes the current directory

3. Now you will create some ASCII text files and save them in the c:\new\utility directory.

Start by typing the following: notepad c:\new\utility\hello.txt

The contents of the file can be anything you want. When finished, save the file by holding down
the ALT and f keys at the same time. This activates the file menu. Press the X key to select Exit
and Y to save the file you just edited..

Create two more text files in the same directory. Call them goodbye.txt and dejavu.txt.

You can view your files by using the type command.

type c:\new\utility\dejavu.txt

CCS0001L – Introduction to Computing Page 8 of 16

 4. Type cls [clear screen] to remove the clutter of old commands from your screen any time you want
to.

5. View the contents of the c:\new directory by typing the following:

dir c:\new

Use the /s switch when you want to view subdirectories. If things just scroll by on the screen, you
can see one screen at a time by adding | more to the end of the command.

6. Next you will copy hello.txt to the c:\new\data\stuff directory by typing:

copy c:\new\utility\hello.txt c:\new\data\stuff\hello.txt

Copy the other text files you created into the c:\new\data\stuff directory.

CCS0001L – Introduction to Computing Page 9 of 16

 Use the dir command to make sure it happened.

7. Now use the xcopy command to copy the contents of the stuff directory to the letters directory.
Check for syntax help to do this with a single command.

What did you type?

xcopy c:\new\data\stuff\ c:\new\data\letters

8. In this step you will use the fc [file compare] command to compare one of the copies to its original
file. Type the following:

fc c:\new\utility\hello.txt c:\new\data\stuff\hello.txt

What result did you get?

9. Use the move command to move a file from the stuff directory to the data directory by typing:

move c:\new\data\stuff\hello.txt c:\new\data

10. Use the rd command to remove the utility directory by typing:

rd c:\new\utility

What happened when you typed this?

______________________________________________________________________

CCS0001L – Introduction to Computing Page 10 of 16

 What must be true in order for the rd command to work?

_____________________________________________________________________

Note: Just write down your observations and leave the directory unchanged for now.

11. Delete the letters directory using the rd /s command.

rd c:\new\data\letters /s

Be careful when using this command. It deletes ALL contents in the directory.

12. Change the name of the hello.txt file by using the ren[ame] command. Type:

ren c:\new\utility\hello.txt aloha.txt

13. Delete the file you moved into the data directory. Type:

del c:\new\data\hello.txt

CCS0001L – Introduction to Computing Page 11 of 16

 14. Protect your file so that nobody can edit it. Type:

attrib c:\new\utility\goodbye.txt +r

This makes the file “read only” so it cannot be altered by setting an attribute.

15. Submit a copy of your directory tree to make sure you did the lab correctly. To get a copy of your
directory tree, do the following:

Make sure you are at the root directory of what you just created (c:\new).

Type cls (this prevents junks to be included in the printout)

CCS0001L – Introduction to Computing Page 12 of 16

 Type tree /f (this shows the directory tree with the files included)

Now click on the icon in the top left corner of the window. Choose edit / select all / <enter> .

Open a Notepad and paste the information.

Save your file as: lastname_section.txt

Upload your file into our e-learning portal.

C:\Users\202210231> tree /f
Folder PATH listing
Volume serial number is 62E4-3032
C:.
│ dejavu.txt
│ goodbye.txt
│ hello.txt
│
├───3D Objects
├───Contacts
├───Desktop
├───Documents
├───Downloads
│ [M5-TECHNICAL1] Software (Operating System) (1).docx
│ [M5-TECHNICAL1] Software (Operating System).docx
│
├───Favorites
│ │ Bing.url
│ │
│ └───Links
├───Links
│ Desktop.lnk
│ Downloads.lnk
│
├───Music
├───OneDrive
├───Pictures
│ ├───Camera Roll
│ └───Saved Pictures
├───Saved Games
├───Searches
│ winrt--{S-1-5-21-828075931-2445622062-993062546-9110}-.searchconnector-ms
│

CCS0001L – Introduction to Computing Page 13 of 16

 └───Videos

C:\Users\202210231>

16. Once your activity has been submitted, remove your folder by typing

rd c:\new /s

VI. QUESTION AND ANSWER

1. What is the Operating System being used (complete details)?

Microsoft Windows 10 pro

2. What Service Pack is installed?

Windows Feature Experience Pack 120.22112.4180.0

3. What is the computer’s full name?

H201-02
4. What is the CPU name and the clock speed of the CPU?

Intel(R) Core(TM) i5-4590T CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 4 Logical Processor(s)

5. What is the amount of RAM present?

8GB

CCS0001L – Introduction to Computing Page 14 of 16

6. Does the computer have a Bluetooth radio? If yes, provide the complete details?

None____________________________________________________________________

7. Does the computer have a network adapter? If yes provide the complete details.

Microsoft Kernel Debug Network

Adapter____________________________________________________________________

8. Write the DOS command to display a wide listing of the contents of the root directory of the F: drive.

Dir f:\____________________________________________________________________

9. White the DOS command to display a directory listing of the contents of the root directory of the C:
drive one page at a time.

Dir c:\ s____________________________________________________________________

10. Write the DOS command to display all the files that begin with the letter "M" in the root directory of
drive C:.

Dir c:\*m*____________________________________________________________________

11. Write the DOS command to display all files on drive C whose filenames begin with the letter A and
whose extensions begin with the letter C.

Dir: c\*A* *C*____________________________________________________________________

12. Write the DOS command to display the files on drive C: that have the .DOC filename extension.

Dir c:\ *.doc*____________________________________________________________________

13. Write the DOS command to make a sub-directory named NEWDIR.

Md c:\NEWDIR____________________________________________________________________

14. Write the DOS command to rename all the files on drive A which have the .HTML filename extension to
have the .HTM filename extension.

____________________________________________________________________

15. Write the DOS command to change the command prompt to C:\>

CCS0001L – Introduction to Computing Page 15 of 16

 Cd C:/____________________________________________________________________

16. Write the DOS command to copy a file named MYFILE1 and name the new copy MYFILE2.

____________________________________________________________________del C:\MYFILES\
MYFILE1

17. Write the DOS command to erase a file named MYFILE1 which is stored in the sub-directory named
MYFILES located at the root of drive C.

____________________________________________________________________

18. Write the DOS command to return you to the root of drive C if your current directory is C:\FIT \CCS001

______CD c:\______________________________________________________________

19. Write the DOS command to erase all the files on drive C:

____________________________________________________________________rd C:\

20. Write the DOS command to delete a subdirectory named FIT which is located at the root of drive C.

___________________________________________________________________rd_C:\FIT

VII. REFERENCES
 Docter, Q., Dulaney, E., & Skandier, T. (2016). CompTIA + Complete Study Guide (3rd Edition)
 Meyers, M. (2016). All In One CompTIA A+ Certification. Mc Graw Hill.
 Pearson. (2016). Introduction to Computers and Information Technology. Upper Saddle River, NJ: Pearson.
 Tavani, H. T. (2016). Ethics and Technology. Wiley.
 White, R. (2015). How Computer Work: The Evolution of Technology. IN: Que.

CCS0001L – Introduction to Computing Page 16 of 16