Scribd
Upload
492 views

FT003 Manual 1.0

This document provides information about a 5.1 channel DTS/Dolby decoder. It describes the LED status indicators for when Dolby, PCM, or DTS audio is received and decoded. It also outlines the 5.1 channel analog audio outputs, the AB control source selection, and notes the decoder is powered on with a low power signal and off with a high power signal. Key features listed are support for DTS, Dolby, and PCM decoding to Dolby ProLogic II, use of a 32-bit floating point DSP, 80Hz crossover with bass management, and a 5.1 channel 24-bit DAC.

Uploaded by

sanil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
492 views

FT003 Manual 1.0

This document provides information about a 5.1 channel DTS/Dolby decoder. It describes the LED status indicators for when Dolby, PCM, or DTS audio is received and decoded. It also outlines the 5.1 channel analog audio outputs, the AB control source selection, and notes the decoder is powered on with a low power signal and off with a high power signal. Key features listed are support for DTS, Dolby, and PCM decoding to Dolby ProLogic II, use of a 32-bit floating point DSP, 80Hz crossover with bass management, and a 5.1 channel 24-bit DAC.

Uploaded by

sanil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5.

1 DTS / DOLBY DECODER


FT003 Ver 1.0
TV(ARC) COAXIAL OPTICAL
1 LED STATUS :

If received and decoding DOLBY (AC3) audio will glow DOLBY LED.
if PCM audio received and PRO II decoded will glow PCM LED.
if DTS audio received and decoded will glow DOLBY and PCM LED.
FAST BLINKING BOTH LED : Board fault
INPUT
2

PWR
AUDIO OUTPUTS :
A
B 5.1 channel decoded analog output
Output Volt - 2.5 Vrms

3
GND AB CONTROL
MINI DECODER (FT003 Ver 1.0) 3 SOURCE SELLECTION AB CONTROL :
A
A = LOW, B = HIGH : OPTICAL, OPTICAL :
B
DOLBY A = HIGH , B = LOW : COAXIAL,
1 PCM
5.1CH A = LOW , B = LOW : TV(ARC) ,
COAXIAL: A
SW

FR

B
CE
SR

GND
SL

FL

(PROLOGIC II)
GND +12V PWR = HIGH : Decoder Power off ,
PWR = LOW : Decoder Power on, HDMI ARC : A
B

2 4 4 POWER :
Features: +12VDC single power supply.
1. DTS / DOLBY / and Stereo PCM to DOLBY PROLLOGIC II Support.
2. 32bit Floating Point DSP for audio processing.
3. 80Hz Fixed Xover with Bass Management.
3. 5.1CH 24bit Digital to Analog Converter.
4. Inbuilt Single supply to Dual Supply Converter for Output Opamp ICs.

You might also like