Page 1 of 18

SLAB DESIGN CALCULATIONS

Project Name : TWO-STOREY RESIDENTIAL BUILDING
Client Name : MRS. AGUILLON
Engineer Name : ENGR. G. HANDAYAN
Design File : D:\projects\handayan structural\Structure1-Slab-1-4.6m.rcdx
Analysis File : D:\projects\handayan structural\Structure1.STD
Analysis Last Modified : 20/01/2023 2:27:07 pm

NOTES:
1. Density of concrete assumed as 25 kN/Cum.

Definitions Of Terms: :
Ratio of flexural stiffness of beam section to flexural
1. αf =
stiffness of slab.
Ratio of torsional stiffness of edge beam section to
2. βt =
flexural stiffness of slab.
3. Φt = Strength reduction factor.
4. As = Area of Tension reinforcement required in sqmm.
5. As,min = Min area of flexural reinforcement in sqmm.
Area of longitudinal reinforcement provided at
6. AstPrv =
given section in sqmm.
Total area of longitudinal reinforcement calculated at
7. Ast =
a given section in sqmm.
8. b = Width of the Slab in mm.
9. B1 to B4 = Width of beams around slab in mm.
10. Cc = Effective Cover to tension reinforcement in mm.
cross-sectional constant to define torsional properties
11. CA and CB =
of slab and beam.
12. deff = Effective depth of slab in mm.
13. D1 to D4 = Depth of beams around slab.
14. Icr = Moment of Inertia of concrete crack section.
Length of clear span in direction that moment are
15. Ln =
being determined in mm.
16. L2 = Length of adjacent span of Ln in mm.
17. lb1 to lb2 = Moment of inertia of beams around slab in mm4.
18. Mcr = Cracking Moment.
19. Mu = Factored Bending Moment at a section in kNm.
20. Ptmin = Minimum percentage steel as per clause 10.
21. PtPrv = Provided percentage steel.
22. Vc = Nominal shear strength provided by concrete in kN.
23. Vu = Factored Shear Force at a section in kN.
24. Vud = Design Shear Force in kN.
25. y = Neutral axis depth.

Code References :

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 2 of 18

ACI 318M - 2014

Item CLAUSE / TABLE

1. Ptmax : 7.3.3.1, 8.3.3.1, 9.3.3.1
2. Ptmin : 7.6.1.1 & 8.6.1.1/7.7.2.3
3. Vc : 22.6.5
4. Av : 22.5.10.5 & 22.6.7
5. Moment calculations : 8.10
6. spacing between main bars : 7.7.2
7. spacing between distribution bars : 7.7.6 & 8.7.2
8. Minimum reinforcement : 7.6.1 & 8.6.1
9. fs,perm : 10.6.4
10. fc,perm : 10.2.7.1
10. Wcr : Eq 4.2(a)

Slab No. : S1
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C55
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 1.650 m
Short Span, Lx = 1.420 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 300 250 250 300
        D (mm) 350 300 300 350
        Ib (mm4)    x106 1071.88 562.5 562.5 1071.88
Adjacent Slab
        Thk (mm) - - 125 125
        Span (mm) - - 1480 2600
        Ib (mm4)    x106 115.56 115.56 254.72 345.87
αf lx, αf ly 9.28 4.87 2.21 3.1
αf 4.86
Ln (mm) 1145 1375

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 3 of 18

L2 (mm) 962.5 847.5

Total BM (kNm) 2.07 2.63
Bottom
        Moment Coefficent 0.85 0.35
        Distributed Moment (kNm) 1.74 0.92
        CS Moment (kNm) 1.22 0.65
        MS Moment (kNm) 0.52 0.28
        Moment on Beam (kNm) 1.04 0.55
        Design Moment M1, M3 (kNm) 0.18 0.1
Top
        Moment Coefficent 0.16 0.65
        Distributed Moment (kNm) 0.33 1.71
        CS Moment (kNm) 0.23 1.2
        MS Moment (kNm) 0.1 0.51
        Moment on Beam (kNm) 0.2 1.02
        Design Moment M2, M4 (kNm) 0.031 0.18

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.183 kNm
Area Of Reinforcement = 7.408 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = N.A. kNm
Area Of Reinforcement = N.A. sqmm/m
Required (BM)
Reinforcement Provided = N.A.
= N.A. sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.097 kNm
Area Of Reinforcement = 4.355 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.180 kNm
Area Of Reinforcement = 8.088 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 4 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 4.668 kN
Nominal Shear, Vc = 107.517 kN
> 4.668 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 5.319 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 96.766 kN
> 5.319 Slab Is Safe In Shear

Slab No. : S2
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.600 m
Short Span, Lx = 1.200 m
Imposed Load, Qk = 5.300 kN/sqm
Live Load = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 1-Way
End Conditions = End Span
Load Combination = 1.2 DL + 1.6 LL

Design  Moments:
Short Span Positive Moment at Mid Span -
Moment Coefficient, M1 = 0.0710
Mu (M1 x TL(ultimate) x Lx x Lx) = 1.353 kNm
Area Of Reinforcement Required = 54.852 sqmm/m
(BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment at Continuous Support -
Moment Coefficient, M2 = 0.1000
Mu (M2 x TL(ultimate) x Lx x Lx) = 1.894 kNm
Area Of Reinforcement Required = 76.908 sqmm/m
(BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 5 of 18

All Other Sections provide Minimum Steel @ 0.18% -

Area Of Reinforcement Required = 180.000 sqmm/m
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Shear Check :
Shear Coefficient, SF1 = 0.500
Vsx (SF1 x TL(ultimate) x Lx) = 7.890 kN
Nominal Shear, Vc = 83.283 kN
> 7.890     Slab Is Safe In Shear

Slab No. : S3
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.600 m
Short Span, Lx = 1.480 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 300 250 300 300
        D (mm) 350 300 350 350
        Ib (mm4)    x106 1071.88 562.5 1071.88 1071.88
Adjacent Slab
        Thk (mm) - 125 - 125
        Span (mm) - 1650 - 2600
        Ib (mm4)    x106 120.44 254.72 211.59 423.18
αf lx, αf ly 8.9 2.21 5.07 2.53
αf 4.68
Ln (mm) 1205 2300
L2 (mm) 1450 877.5
Total BM (kNm) 3.46 7.63
Bottom
        Moment Coefficent 0.35 0.84
        Distributed Moment (kNm) 1.21 6.41

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 6 of 18

        CS Moment (kNm) 0.63 3.35

        MS Moment (kNm) 0.58 3.06
        Moment on Beam (kNm) 0.54 2.85
        Design Moment M1, M3 (kNm) 0.1 0.5
Top
        Moment Coefficent 0.65 0.16
        Distributed Moment (kNm) 2.25 1.22
        CS Moment (kNm) 1.18 0.64
        MS Moment (kNm) 1.07 0.58
        Moment on Beam (kNm) 1 0.54
        Design Moment M2, M4 (kNm) 0.181 0.1

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.095 kNm
Area Of Reinforcement = 3.840 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.176 kNm
Area Of Reinforcement = 7.133 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.503 kNm
Area Of Reinforcement = 22.610 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = N.A. kNm
Area Of Reinforcement = N.A. sqmm/m
Required (BM)
Reinforcement Provided = N.A.
= N.A. sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 7 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 4.866 kN
Nominal Shear, Vc = 83.283 kN
> 4.866 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 6.961 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 6.961 Slab Is Safe In Shear

Slab No. : S5
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.600 m
Short Span, Lx = 1.200 m
Imposed Load, Qk = 5.300 kN/sqm
Live Load = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 1-Way
End Conditions = End Span
Load Combination = 1.2 DL + 1.6 LL

Design  Moments:
Short Span Positive Moment at Mid Span -
Moment Coefficient, M1 = 0.0710
Mu (M1 x TL(ultimate) x Lx x Lx) = 1.353 kNm
Area Of Reinforcement Required = 54.852 sqmm/m
(BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment at Continuous Support -
Moment Coefficient, M2 = 0.1000
Mu (M2 x TL(ultimate) x Lx x Lx) = 1.894 kNm
Area Of Reinforcement Required = 76.908 sqmm/m
(BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 8 of 18

All Other Sections provide Minimum Steel @ 0.18% -

Area Of Reinforcement Required = 180.000 sqmm/m
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Shear Check :
Shear Coefficient, SF1 = 0.500
Vsx (SF1 x TL(ultimate) x Lx) = 7.890 kN
Nominal Shear, Vc = 83.283 kN
> 7.890     Slab Is Safe In Shear

Slab No. : S6
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.600 m
Short Span, Lx = 1.650 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 300 300 300
        D (mm) 300 350 350 350
        Ib (mm4)    x106 562.5 1071.88 1071.88 1071.88
Adjacent Slab
        Thk (mm) 125 125 - 125
        Span (mm) 1870 1200 - 1650
        Ib (mm4)    x106 286.46 231.93 211.59 345.87
αf lx, αf ly 1.96 4.62 5.07 3.1
αf 3.69
Ln (mm) 1375 2300
L2 (mm) 1450 962.5
Total BM (kNm) 4.51 8.37
Bottom
        Moment Coefficent 0.35 0.57
        Distributed Moment (kNm) 1.58 4.77

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 9 of 18

        CS Moment (kNm) 0.91 2.75

        MS Moment (kNm) 0.67 2.02
        Moment on Beam (kNm) 0.77 2.34
        Design Moment M1, M3 (kNm) 0.14 0.41
Top
        Moment Coefficent 0.65 0.7
        Distributed Moment (kNm) 2.93 5.86
        CS Moment (kNm) 1.69 3.38
        MS Moment (kNm) 1.24 2.48
        Moment on Beam (kNm) 1.44 2.87
        Design Moment M2, M4 (kNm) 0.251 0.51

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.137 kNm
Area Of Reinforcement = 5.520 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.254 kNm
Area Of Reinforcement = 10.255 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.413 kNm
Area Of Reinforcement = 18.571 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.507 kNm
Area Of Reinforcement = 22.813 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 10 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 5.424 kN
Nominal Shear, Vc = 83.283 kN
> 5.424 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 7.406 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 7.406 Slab Is Safe In Shear

Slab No. : S7
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.600 m
Short Span, Lx = 1.870 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 300 250 300 300
        D (mm) 350 300 350 350
        Ib (mm4)    x106 1071.88 562.5 1071.88 1071.88
Adjacent Slab
        Thk (mm) - 125 125 125
        Span (mm) - 1650 2600 2140
        Ib (mm4)    x106 152.18 286.46 423.18 385.74
αf lx, αf ly 7.04 1.96 2.53 2.78
αf 3.58
Ln (mm) 1595 2300
L2 (mm) 1450 1072.5
Total BM (kNm) 6.06 9.33

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 11 of 18

Bottom
        Moment Coefficent 0.35 0.57
        Distributed Moment (kNm) 2.12 5.32
        CS Moment (kNm) 1.34 3.36
        MS Moment (kNm) 0.78 1.95
        Moment on Beam (kNm) 1.14 2.86
        Design Moment M1, M3 (kNm) 0.2 0.5
Top
        Moment Coefficent 0.65 0.7
        Distributed Moment (kNm) 3.94 6.53
        CS Moment (kNm) 2.49 4.13
        MS Moment (kNm) 1.45 2.4
        Moment on Beam (kNm) 2.12 3.51
        Design Moment M2, M4 (kNm) 0.371 0.62

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.201 kNm
Area Of Reinforcement = 8.145 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.374 kNm
Area Of Reinforcement = 15.133 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.505 kNm
Area Of Reinforcement = 22.694 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.620 kNm
Area Of Reinforcement = 27.880 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 12 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 6.148 kN
Nominal Shear, Vc = 83.283 kN
> 6.148 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 7.874 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 7.874 Slab Is Safe In Shear

Slab No. : S8
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 1.330 m
Short Span, Lx = 1.200 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 300 200 300 200
        D (mm) 350 300 350 300
        Ib (mm4)    x106 1071.88 450 1071.88 450
Adjacent Slab
        Thk (mm) 125 - 125 -
        Span (mm) 1330 - 2600 -
        Ib (mm4)    x106 205.89 97.66 319.82 108.24
αf lx, αf ly 5.21 4.61 3.35 4.16
αf 4.33
Ln (mm) 950 1080
L2 (mm) 790 725
Total BM (kNm) 1.17 1.39

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 13 of 18

Bottom
        Moment Coefficent 0.57 0.57
        Distributed Moment (kNm) 0.67 0.79
        CS Moment (kNm) 0.48 0.57
        MS Moment (kNm) 0.19 0.22
        Moment on Beam (kNm) 0.41 0.48
        Design Moment M1, M3 (kNm) 0.07 0.09
Top
        Moment Coefficent 0.7 0.7
        Distributed Moment (kNm) 0.82 0.97
        CS Moment (kNm) 0.59 0.7
        MS Moment (kNm) 0.23 0.27
        Moment on Beam (kNm) 0.5 0.59
        Design Moment M2, M4 (kNm) 0.091 0.1

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.072 kNm
Area Of Reinforcement = 2.905 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.088 kNm
Area Of Reinforcement = 3.568 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.085 kNm
Area Of Reinforcement = 3.829 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.105 kNm
Area Of Reinforcement = 4.703 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 14 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 3.945 kN
Nominal Shear, Vc = 83.283 kN
> 3.945 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 4.331 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 4.331 Slab Is Safe In Shear

Slab No. : S9
Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 1.650 m
Short Span, Lx = 1.330 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 250 300 300 200
        D (mm) 300 350 350 300
        Ib (mm4)    x106 562.5 1071.88 1071.88 450
Adjacent Slab
        Thk (mm) 125 125 125 -
        Span (mm) 1330 1200 2600 -
        Ib (mm4)    x106 216.47 205.89 345.87 134.28
αf lx, αf ly 2.6 5.21 3.1 3.35
αf 3.56
Ln (mm) 1055 1400
L2 (mm) 950 802.5
Total BM (kNm) 1.74 2.59

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 15 of 18

Bottom
        Moment Coefficent 0.57 0.35
        Distributed Moment (kNm) 0.99 0.9
        CS Moment (kNm) 0.67 0.61
        MS Moment (kNm) 0.32 0.29
        Moment on Beam (kNm) 0.57 0.52
        Design Moment M1, M3 (kNm) 0.1 0.09
Top
        Moment Coefficent 0.7 0.65
        Distributed Moment (kNm) 1.22 1.68
        CS Moment (kNm) 0.82 1.14
        MS Moment (kNm) 0.39 0.54
        Moment on Beam (kNm) 0.7 0.97
        Design Moment M2, M4 (kNm) 0.121 0.17

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.101 kNm
Area Of Reinforcement = 4.071 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.124 kNm
Area Of Reinforcement = 5.000 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.092 kNm
Area Of Reinforcement = 4.132 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.171 kNm
Area Of Reinforcement = 7.675 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 16 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 4.372 kN
Nominal Shear, Vc = 83.283 kN
> 4.372 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 5.220 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 5.220 Slab Is Safe In Shear

Slab No. : S10

Level = 4.6m
Design Code = ACI 318M - 2014
Grade Of Concrete = C24
Grade Of Steel = Fy275
Clear Cover = 20.000 mm
Long Span, Ly = 2.140 m
Short Span, Lx = 1.330 m
Imposed Load = 5.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 13.150 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
        B (mm) 300 250 300 200
        D (mm) 350 300 350 300
        Ib (mm4)    x106 1071.88 562.5 1071.88 450
Adjacent Slab
        Thk (mm) - 125 125 -
        Span (mm) - 1330 2600 -
        Ib (mm4)    x106 108.24 216.47 385.74 174.15
αf lx, αf ly 9.9 2.6 2.78 2.58
αf 4.47
Ln (mm) 1055 1890
L2 (mm) 1195 802.5
Total BM (kNm) 2.19 4.71

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 17 of 18

Bottom
        Moment Coefficent 0.57 0.57
        Distributed Moment (kNm) 1.25 2.69
        CS Moment (kNm) 0.71 1.52
        MS Moment (kNm) 0.54 1.16
        Moment on Beam (kNm) 0.6 1.3
        Design Moment M1, M3 (kNm) 0.11 0.23
Top
        Moment Coefficent 0.7 0.7
        Distributed Moment (kNm) 1.53 3.3
        CS Moment (kNm) 0.87 1.87
        MS Moment (kNm) 0.66 1.43
        Moment on Beam (kNm) 0.74 1.59
        Design Moment M2, M4 (kNm) 0.131 0.28

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.106 kNm
Area Of Reinforcement = 4.286 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.130 kNm
Area Of Reinforcement = 5.264 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.229 kNm
Area Of Reinforcement = 10.268 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.281 kNm
Area Of Reinforcement = 12.612 sqmm/m
Required (BM)
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #12 @ 195 C/C
= 580.000 sqmm/m

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023
 Page 18 of 18

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 4.372 kN
Nominal Shear, Vc = 83.283 kN
> 4.372 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 6.027 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 74.954 kN
> 6.027 Slab Is Safe In Shear

file:///C:/Users/GL702VM-EV032T/AppData/Local/Temp/tmp96C7.tmp 20/01/2023