Product Information
Standard Grade
KOCETAL®
KOCETAL® refers to polyacetal resin of a copolymer type. And is a material of an excellent quality with features of
excellent anti-friction/anti-wear, chemical-resistance, heat-resisting stability, precise dimensions and molding
abilities. It is mainly applied in gear or roller, and is used for various purposes over the fields of cars, office
equipment and living materials. Following POM (Brand name: made by our independent technology development,
Kolon Plastics has developed low-VOCs (volatile KOCETAL) products that are organic chemicals) POM resin of the
world-best quality with almost no emission during the process of formaldehyde that is harmful to human body
for the first time in Korea.
®
KOCETAL K300
: KOCETAL® K300 is a general injection moldings grade with a good mechanical properties for wide range.
Properties Test Method Unit Value
Physical
Specific Gravity ISO 1183 g/cm3 1.41
Melt Index (190℃, 2.16kg) ISO 1133 g/10min 9.0
Shrinkage ISO 294 % 2.0
Water Absorption 23℃, H2O, 24hr ISO 62 % 0.22
Mechanical
Tensile Strength 23℃ ISO 527-1/2 MPa 65
Tensile Elongation 23℃ ISO 527-1/2 % 35
Flexural Strength 23℃ ISO 178 MPa 85
Flexural Modulus 23℃ ISO 178 MPa 2,700
Notched Charpy Impact Strength 23℃ ISO 179/1eA kJ/m2 7.0
Rockwell Hardness ISO 2039-1 M scale 82
Thermal
Melting Point ISO 11357-1 ℃ 166
Heat Deflection Temperature ISO 75
1.8 MPa ℃ 95
Flammability(0.8mm) UL94 HB
10F, an annex to Kolon Tower 13, Kolon-ro, Gwacheon-si, Gyeonggi-do, Republic of Korea
Electrical
Dielectric strength IEC 60243 kV/mm 19
Volume Resistivity IEC 60093 Ω·cm 1× 1014
Surface Resistivity IEC 60093 Ω 1× 1016
Processing Guide (Injection Molding)
H4
H1 H2 H3 Mol
H1 H2 H3 H4
Cylinder Temperature(℃) 180 190 190 200
Mold Temperature(℃) 60~80
Limitation of Processing Temp. (℃) 220
Pre-drying 80~90℃, 3 hrs
The above-mentioned data was measured by Kolon Plastics, inc,. under certain conditions and environment. Therefore, it can not be
compared with the data measured under different conditions and environment. And not guaranteed and no warranty. If other
additives and pigments are used on this product, The above data cannot be applied. The data can not be used as the evidence of
legal proceedings.
Contact www.kolonplastics.com
10F, an annex to Kolon Tower 13, Kolon-ro, Gwacheon-si, Gyeonggi-do, Republic of Korea
