Scribd
Upload
58 views

CDJ-850 Update Guide EN

Update Pioneer CDJ-850 Firmware Manual

Uploaded by

C-Dryk ™
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

CDJ-850 Update Guide EN

Update Pioneer CDJ-850 Firmware Manual

Uploaded by

C-Dryk ™
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

PERFORMANCE MULTI PLAYER

CDJ-850

Firmware Update Guide


Checking the Version

STEP 2. STEP 1.
The UTILITY screen appears. Turn on the power.
Press the [MENU(UTILITY)] button for at Set the power switch to the on position.
least 1 second to display the UTILITY
screen.

STEP 3.
Check the version.
Scroll the screen using the rotary selector.
"VERSION No." is displayed at the very
bottom.
STEP 4.
Quit the version display mode.
Press the [MENU(UTILITY)] button to
close the UTILITY screen.
Updating

STEP 1.
Extract the compressed file on the computer.

With the mouse, right-click on the "CDJ-850vxxx.zip" compressed file you have downloaded
from the Pioneer website and select "Properties" and check that the number of bytes is correct.

CDJ-850vxxx.zip (x,xxx,xxx bytes)

With the mouse, right-click on the "CDJ-850vxxx.zip" and select "Extract All".
When you specify where to extract the file, the update file below is extracted in a folder named
"CDJ-850vxxx".
C850M .
AIN.UPD C850MAIN.UPD

Update file
STEP 2.
Copy the extracted update file into the root directory of the USB memory
device.

Use a USB memory device (USB mass storage class device) formatted in FAT or FAT32 and with at
least 4 Mbytes of free space.

[NOTE]
- DO NOT change the file name.
- The HFS+ format is not supported.
STEP 4. STEP 3.
Insert the USB memory device into the Set the update mode.
USB port. Eject the disc from the disc insertion slot and
Use the USB memory device onto which the turn the power off. Disconnect the USB
update file was copied in advance. memory device and computer connected to
the CDJ-850.
STEP 5. Next, turn on the power while simultaneously
pressing the [USB] and [RELOOP/EXIT]
Updating starts automatically.
buttons.
The message "NOW UPDATING" flashes on
(Keep pressing until the "POWER ON"
the main unit display and the progress is
indicator on the main unit display turns off.)
indicated on a progress bar. At the same
time, the current version number and the
When the message below appears, release
version number after rewriting are displayed.
the button.
Do not disconnect the USB memory device or
turn off the power during updating.

The "COMPLETE! Turn the power off"


message appears after approximately 1min.

This completes the updating procedure.

STEP 6. * If updating does not start or if "Updating has failed" is displayed when updating is
Turn the power off and disconnect the completed:
USB memory device. The file you have downloaded may be corrupt.
Start over from downloading the firmware update file. If updating is still not possible, the problem
STEP 7. may be with the USB memory device. Try using a different USB memory device.
Check that the firmware has been * If the progress bar does not progress during updating, if the "COMPLETE!" message
updated to the latest version. does not appear after 5 minutes, or if a message such as "MAIN firmware update failed"
Refer to "Checking the Version" to check that appears:
the firmware is the latest version. Contact a Customer Support Center.
About trademarks and registered trademarks
・ Pioneer is a registered trademark of PIONEER CORPORATION.

© 2012 PIONEER CORPORATION. All rights reserved.

PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan

You might also like