EEE-314

Data Communication and

Computer Networks
(DCCN)
Fall 2022
 Mohammad kaleem, PhD

 Faculty Block-1, 2nd Floor Room 212

Introduction 1-1
Data
Communication
and Computer
Networks Computer Networking: A
Top Down Approach
6th edition
Jim Kurose, Keith Ross
Addison-Wesley
March 2012

Introduction 1-2
Dr. Mohammad kaleem
 Asst. Prof. NUST (E&ME) 2002 ---- Feb2014
 IT Consultant BT England 1999 ---- 2002
 Network Engineer Silicon Software Tech. Ltd. 1998 ---1999
 Hard ware Engineer GHS Technology Ltd. 1995---1997
 PhD in Nano-photonics
 MSEng in Telecommunication and Computer
Networks England UK
 BEng(Hons) in Electrical Electronics and
Information System Engineering England UK

Introduction 2-3
 Introduction
 Prerequisites:
 EEE 343 Computer Organization
 EEE Introduction to Communication
 Textbook:
 Computer Networking, J. Kurose and K. Ross, 6th
ed. Pearson, 2012
 Reference Books:
 Data Communications and Networking, Behrouz
A. Forouzan, 4th ed.2003.
 Data and Computer Communications, William
Stallings,8th ed. Prentice Hall, 2007
 Computer Networks, Andrew S. Tanenbaum
Introduction 2-4
 Assessment Plan
Theory
Quiz 15%
Homework assignments 10%
Mid-term (in class, 60-80 minutes) 25%

Terminal exam (3 hours) 50%

Total (theory) 100%

Lab work
Lab reports 25%
Mid-Lab sessionals 25%
Lab project and terminal exam 50%

Total (lab) 100%

Introduction 1-5
Course Objectives
 Focus is on the principles, architectures ,
protocols and fundamental techniques related to
computer networks
 Goal is to cover core and advanced topics in
depth along with introduction to Network
Modeling, Simulation and Analysis
 Lots of interesting topics to cover
 Feedback if you would like to discuss some other
technology or any related topic

Introduction 1-6
Course Contents
 Introduction: Internet Architecture, End-to-End principle and Internet
design, Physical Layer Technologies
 Applications and Transport: HTTP, FTP, DNS, SMTP, Overlay Networks
and Peer-to-Peer (P2P) Systems, P2P File Sharing, Transport Services
(TCP and UDP)
 IP Routing: IP Addressing, Overview of Internet Protocols (e.g. IP, ARP,
RARP, ICMP), Distance Vector, Link-State (OSPF), BGP, Multicast
routing.
 Congestion Control: Open-loop (Policing and Shaping), Closed-loop
(TCP congestion control algorithms - Reno, Tahoe,Vegas); Network
Assisted – ECN; Active Queue Management (RED).
 Internet QoS: QoS Schedulers (WFQ, DRR, PQ), IP QoS
Architectures, IntServ and RSVP, DiffServ, Router Design for IP QoS,
Policy-based QoS Management.

Introduction 1-7
Course Contents
 Traffic Engineering: Principles of IP Traffic Engineering, MPLS, ..
 Multimedia Networking: Multimedia Applications, Protocols for
Multimedia Support, RTP, RTCP, RTSP, ..
 Virtualization: Cloud Computing, SDN, Open Flow, ..
 Network Management: Network management framework, SNMP,
ASN
 Network Security: Cryptography, Symmetric Key Algorithms, Public
Key Algorithms, Digital Signatures, Management of Public Keys,
Communication Security, IPSec, Firewalls, VPNs, Authentication
Protocols
 Network Modeling, Simulation and Analysis: System Performance
Evaluation, Traffic Analysis and Optimization, Queuing Theory,
Simulation Modeling and Analysis (Network Simulators : ns-3,
OMNET, NCTNns)

Introduction 1-8
 A Communications Model
 Source
 generates data to be transmitted
 Transmitter
 Converts data into transmittable signals
 Transmission System
 Carries data
 Receiver
 Converts received signal into data
 Destination
 Takes incoming data

Introduction 1-9
Simplified Communications Model
- Diagram

Introduction 1-10
Key Communications Tasks
 Transmission System Utilization
 Interfacing
 Signal Generation
 Synchronization
 Exchange Management
 Error detection and correction
 Addressing and routing
 Recovery
 Message formatting
 Security Suppose we have a digital transmission system
 Network Management with bandwidth of 4MHz. Let us attempt to transmit
a sequence of alternating 1s and 0s as the square
wave. What data rate can be achieved? Assume f =
1MHz (cycle/sec). Repeat if f = 2MHz (cycle/sec).

Introduction 1-11
Simplified Data Communications
Model

Introduction 1-12
 Networking
 Point to point communication not usually
practical

 Devices are too far apart

 Large set of devices would need impractical
number of connections

 Solution is a communications network

Introduction 1-13
Simplified Network Model

Introduction 1-14
Chapter 1: introduction
our goal: overview:
 get “feel” and  what’s the Internet?
terminology  what’s a protocol?
 network edge; hosts, access net,
 more depth, detail
physical media
later in course  network core: packet/circuit
 approach: switching, Internet structure
 use Internet as  performance: loss, delay,
throughput
example
 security
 protocol layers, service models
 history

Introduction 1-15
Chapter 1: roadmap
1.1 Internet
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-16
What’s the Internet: “nuts and bolts” view
 millions of connected
PC mobile network
server computing devices:
wireless  hosts = end systems global ISP
laptop
smartphone  running network apps
home
 communication links network
regional ISP
wireless  fiber, copper, radio,
links satellite
wired
links  transmission rate:
bandwidth

 Packetswitches: forward
router packets (chunks of data) institutional
network
 routers and switches
Introduction 1-17
“Fun” internet appliances

Web-enabled toaster +
weather forecaster

IP picture frame
http://www.ceiva.com/

Tweet-a-watt:
monitor energy use

Slingbox: watch,
control cable TV remotely
Internet
refrigerator Internet phones
Introduction 1-18
 What’s the Internet: “nuts and bolts” view
mobile network
 Internet: “network of networks”
 Interconnected ISPs
global ISP
 protocols control sending,
receiving of msgs
 e.g., TCP, IP, HTTP, Skype, 802.11 home
network
 Internet standards regional ISP
 RFC: Request for comments
 IETF: Internet Engineering Task
Force

Q: Given the following information, find the

minimum bandwidth required for the path: institutional
network
FDM Multiplexing
Five devices, each requiring 4000 Hz.
200 Hz guard band for each device. Introduction 1-19
What’s the Internet: a service view
mobile network
 Infrastructure that provides
services to applications: global ISP

 Web, VoIP, email, games, e-

commerce, TV/IP, social home
nets, … (Distributed by network
nature..) regional ISP

 provides programming
interface to apps
 hooks that allow sending
and receiving app programs
to “connect” to Internet
 provides service options, institutional
analogous to postal service network

Introduction 1-20
What’s a protocol?
human protocols: network protocols:
 “what’s the time?”  machines rather than
 “I have a question” humans
 introductions  all communication activity
in Internet governed by
protocols
… specific msgs sent
… specific actions taken
when msgs received, or protocols define format, order
other events
of msgs sent and received
among network entities,
and actions taken on msg
transmission, receipt
Introduction 1-21
What’s a protocol?
a human protocol and a computer network protocol:

Hi TCP connection
request
Hi TCP connection
response
Got the
time? Get http://www.awl.com/kurose-ross
2:00
<file>
time

Q: other human protocols?

Introduction 1-22
Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-23
A closer look at network structure:
 network edge: mobile network

 hosts: clients and servers

global ISP
 servers often in data
centers
home
 access networks, physical network
regional ISP
media: wired, wireless
communication links

 network core:
 interconnected routers
 network of networks institutional
network

Introduction 1-24
Access networks and physical media

Q: How to connect end

systems to edge router?
 residential access nets
 institutional access
networks (school,
company)
 mobile access networks
keep in mind:
 bandwidth (bits per second)
of access network?
 shared or dedicated?

Introduction 1-25
Access net: digital subscriber line (DSL)
central office telephone
network

DSL splitter
modem DSLAM

ISP
voice, data transmitted
at different frequencies over DSL access
dedicated line to central office multiplexer

 use existing telephone line to central office DSLAM

 data over DSL phone line goes to Internet
 voice over DSL phone line goes to telephone net
 < 2.5 Mbps upstream transmission rate (typically < 1 Mbps)
 < 24 Mbps downstream transmission rate (typically < 10 Mbps)
Introduction 1-26
Access net: cable network
cable headend

cable splitter
modem

C
O
V V V V V V N
I I I I I I D D T
D D D D D D A A R
E E E E E E T T O
O O O O O O A A L

1 2 3 4 5 6 7 8 9

Channels

frequency division multiplexing: different channels transmitted

in different frequency bands
Introduction 1-27
Access net: cable network
cable headend

cable splitter cable modem

modem CMTS termination system

data, TV transmitted at different

frequencies over shared cable ISP
distribution network

 HFC: hybrid fiber coax

 asymmetric: up to 30Mbps downstream transmission rate, 2
Mbps upstream transmission rate
 network of cable, fiber attaches homes to ISP router
 homes share access network to cable headend
 unlike DSL, which has dedicated access to central office
Introduction 1-28
 Access net: home network
wireless
devices

to/from headend or
central office
often combined
in single box

cable or DSL modem

wireless access router, firewall, NAT

point (54 Mbps)
wired Ethernet (100 Mbps)

Introduction 1-29
Enterprise access networks (Ethernet)

institutional link to
ISP (Internet)
institutional router

Ethernet institutional mail,

switch web servers

 typically used in companies, universities, etc

 10 Mbps, 100Mbps, 1Gbps, 10Gbps transmission rates
 today, end systems typically connect into Ethernet switch

Introduction 1-30
 Wireless access networks
 shared wireless access network connects end system to router
 via base station aka “access point”

wireless LANs: wide-area wireless access

 within building (100 ft)  provided by telco (cellular)
 802.11b/g (WiFi): 11, 54 Mbps operator, 10’s km
transmission rate  between 1 and 10 Mbps
 3G, 4G: LTE

to Internet

to Internet
If a periodic signal is decomposed into five sine waves with frequencies of
100, 300, 500, 700,and 900 Hz, what is the bandwidth? Draw the spectrum,
Introduction 1-31
assuming all components have a maxi-mum amplitude of 10 V.
Host: sends packets of data
An image is 800x600 pixels with 3 bytes/pixel.
Assume the image is uncompressed. How
long does it take to transmit it:
host sending function: over a 56-kbps modem channel?
over a 1-Mbps cable modem?
 takes application message over a 10-Mbps Ethernet?

 breaks into smaller two packets,

chunks, known as packets, L bits each
of length L bits
 transmits packet into
access network at 2 1
transmission rate R R: link transmission rate
 link transmission rate, host
aka link capacity, aka
link bandwidth

packet time needed to L (bits)

transmission = transmit L-bit =
delay packet into link R (bits/sec)
1-32
Physical media
 bit: propagates between
transmitter/receiver pairs
 physical link: what lies twisted pair (TP)
between transmitter &  two insulated copper
receiver wires
 guided media:  Category 5: 100 Mbps, 1
Gpbs Ethernet
 signals propagate in solid  Category 6: 10Gbps
media: copper, fiber, coax
 unguided media:
 signals propagate freely,
e.g., radio

Introduction 1-33
Physical media: coax, fiber
coaxial cable: fiber optic cable:
 two concentric copper  glass fiber carrying light
conductors pulses, each pulse a bit
 bidirectional  high-speed operation:
 broadband:  high-speed point-to-point
 multiple channels on cable transmission (e.g., 10’s-100’s
Gpbs transmission rate)
 HFC
 low error rate:
 repeaters spaced far apart
 immune to electromagnetic
noise

Introduction 1-34
Optical Fiber

Introduction 1-35
Optical Fiber Transmission Modes

Introduction 1-36
 Physical media: radio
 signal carried in radio link types:
electromagnetic spectrum  terrestrial microwave
 no physical “wire”  e.g. up to 45 Mbps channels
 bidirectional  LAN (e.g., WiFi)
 propagation environment  11Mbps, 54 Mbps
effects:  wide-area (e.g., cellular)
 reflection  3G cellular: ~ few Mbps
 obstruction by objects  satellite
 interference  Kbps to 45Mbps channel (or
multiple smaller channels)
 270 msec end-end delay
 geosynchronous versus low
altitude
A client-server system uses a satellite network, with the satellite at a height of 15,000 km.
What is the best-case delay in response to a request?
Introduction 1-37
 Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

A digital signal has a bit rate of 2000 bps. What is the duration of each bit (bit interval)?
Introduction 1-38
 The network core
 mesh of interconnected
routers
 packet-switching: hosts
break application-layer
messages into packets
 forward packets from one
router to the next, across
links on path from source
to destination
 each packet transmitted at
full link capacity

A signal has a spectrum with frequencies between 1000 and 2000 Hz (bandwidth of 1000 Hz).
A medium can pass frequencies from 3000 to 4000 Hz (a bandwidth of 1000 Hz). Can this
signal faithfully pass through this medium? Introduction 1-39
Packet-switching: store-and-forward

L bits
per packet

3 2 1
source destination
R bps R bps

 takes L/R seconds to one-hop numerical example:

transmit (push out) L-bit
packet into link at R bps  L = 7.5 Mbits
 store and forward: entire  R = 1.5 Mbps
packet must arrive at router  one-hop transmission
before it can be transmitted delay = 5 sec
on next link
 end-end delay = 2L/R (assuming
zero propagation delay) more on delay shortly …
Introduction 1-40
Packet Switching: queueing delay, loss

R = 100 Mb/s C
A
D
R = 1.5 Mb/s
B
queue of packets E
waiting for output link

queuing and loss:

 If arrival rate (in bits) to link exceeds transmission rate of
link for a period of time:
 packets will queue, wait to be transmitted on link
 packets can be dropped (lost) if memory (buffer) fills up

Introduction 1-41
 Two key network-core functions
routing: determines source- forwarding: move packets from
destination route taken by router’s input to appropriate
packets router output
 routing algorithms

routing algorithm

local forwarding table

header value output link
0100 3 1
0101 2
0111 2 3 2
1001 1

dest address in arriving

packet’s header
Network Layer 4-42
Alternative core: circuit switching
end-end resources allocated
to, reserved for “call”
between source & dest:
 In diagram, each link has four
circuits.
 call gets 2nd circuit in top
link and 1st circuit in right
link.
 dedicated resources: no sharing
 circuit-like (guaranteed)
performance
 circuit segment idle if not used
by call (no sharing)
 Commonly used in traditional
telephone networks
Introduction 1-43
Circuit switching: FDM versus TDM
Example:
FDM
4 users

frequency

time
TDM

frequency

time
Introduction 1-44
Packet switching versus circuit switching
packet switching allows more users to use network!

example:
 1 Mb/s link
 each user: N
users
• 100 kb/s when “active”
• active 10% of time 1 Mbps link

 circuit-switching:
 10 users
 packet switching: Q: how did we get value 0.0004?
 with 35 users, probability >
10 active at same time is less Q: what happens if > 35 users ?
than .0004 *

* Check out the online interactive exercises for more examples Introduction 1-45
Introduction 1-46
Packet switching versus circuit switching
is packet switching a “slam dunk winner?”
 great for bursty data
 resource sharing
 simpler, no call setup
 excessive congestion possible: packet delay and loss
 protocols needed for reliable data transfer, congestion
control
 Q: How to provide circuit-like behavior?
 bandwidth guarantees needed for audio/video apps
 still an unsolved problem (chapter 7)

Q: human analogies of reserved resources (circuit switching)

versus on-demand allocation (packet-switching)?
Introduction 1-47
Internet structure: network of networks
 End systems connect to Internet via access ISPs (Internet
Service Providers)
 Residential, company and university ISPs
 Access ISPs in turn must be interconnected.
 So that any two hosts can send packets to each other
 Resulting network of networks is very complex
 Evolution was driven by economics and national policies
 Let’s take a stepwise approach to describe current Internet
structure
Internet structure: network of networks
Question: given millions of access ISPs, how to connect them
together?
access access
net net
access
net
access
access net
net
access
access net
net

access access
net net

access
net
access
net

access
net
access
net
access access
net access net
net
Internet structure: network of networks
Option: connect each access ISP to every other access ISP?

access access
net net
access
net
access
access net
net
access
access net
net

connecting each access ISP

access
to each other directly access
net net

access
net
access
net

access
net
access
net
access access
net access net
net
Internet structure: network of networks
Option: connect each access ISP to a global transit ISP? Customer
and provider ISPs have economic agreement.
access access
net net
access
net
access
access net
net
access
access net
net

global
access
net
ISP access
net

access
net
access
net

access
net
access
net
access access
net access net
net
Internet structure: network of networks
But if one global ISP is viable business, there will be competitors
….
access access
net net
access
net
access
access net
net
access
access net
net
ISP A

access access
net ISP B net

access
ISP C
net
access
net

access
net
access
net
access access
net access net
net
Internet structure: network of networks
But if one global ISP is viable business, there will be competitors
…. which must be interconnected
access access
Internet exchange point
net net
access
net
access
access net
net

access
IXP access
net
net
ISP A

access IXP access

net ISP B net

access
ISP C
net
access
net

access peering link

net
access
net
access access
net access net
net
Internet structure: network of networks
… and regional networks may arise to connect access nets to
ISPS
access access
net net
access
net
access
access net
net

access
IXP access
net
net
ISP A

access IXP access

net ISP B net

access
ISP C
net
access
net

access
net regional net
access
net
access access
net access net
net
Internet structure: network of networks
… and content provider networks (e.g., Google, Microsoft,
Akamai ) may run their own network, to bring services, content
close to end users
access access
net net
access
net
access
access net
net

access
IXP access
net
net
ISP A
Content provider network
access IXP access
net ISP B net

access
ISP B
net
access
net

access
net regional net
access
net
access access
net access net
net
 Internet structure: network of networks

Tier 1 ISP Tier 1 ISP Google

IXP IXP IXP

Regional ISP Regional ISP

access access access access access access access access

ISP ISP ISP ISP ISP ISP ISP ISP

 at center: small # of well-connected large networks

 “tier-1” commercial ISPs (e.g., Level 3, Sprint, AT&T, NTT), national &
international coverage
 content provider network (e.g, Google): private network that connects
it data centers to Internet, often bypassing tier-1, regional ISPs Introduction 1-56
 COMSATS Institute of Information Technology, Islamabad Campus
Assignment – 1 Spring 2017
Class:<BET-6B Date:<14-02-2017>

Subject:<Data Communicaton and Computer Networks>

Instructor: < Mohammad kaleem > Marks: <10>

Write a short report which shows the Internet layout plan of

COMSATS, Institute of Information technology.
The Layout plan should also discuss the bandwidth distribution
to different departments and the back bone Internet provider
(ISPs).

Note:
Copied or plagiarized assignments will result in a zero grade.
Submission Date: 07-03-2017
Introduction 1-57
Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-58
How do loss and delay occur?
packets queue in router buffers
 packet arrival rate to link (temporarily) exceeds output link
capacity
 packets queue, wait for turn
packet being transmitted (delay)

B
packets queueing (delay)
free (available) buffers: arriving packets
dropped (loss) if no free buffers

Introduction 1-59
Four sources of packet delay
transmission
A propagation

B
nodal
processing queueing

dnodal = dproc + dqueue + dtrans + dprop

dproc: nodal processing dqueue: queueing delay

 check bit errors  time waiting at output link
 determine output link for transmission
 typically < msec  depends on congestion
level of router
Introduction 1-60
Four sources of packet delay
transmission
A propagation

B
nodal
processing queueing

dnodal = dproc + dqueue + dtrans + dprop

dtrans: transmission delay: dprop: propagation delay:

 L: packet length (bits)  d: length of physical link
 R: link bandwidth (bps)  s: propagation speed in medium
 dtrans = L/R (~2x108 m/sec)
dtrans and dprop  dprop = d/s
very different
* Check out the Java applet for an interactive animation on trans vs. prop delay Introduction 1-61
Caravan analogy
100 km 100 km
ten-car toll toll
caravan booth booth

 cars “propagate” at  time to “push” entire

100 km/hr caravan through toll
 toll booth takes 12 sec to booth onto highway =
service car (bit transmission 12*10 = 120 sec
time)  time for last car to
 car~bit; caravan ~ packet propagate from 1st to
 Q: How long until caravan is 2nd toll both:
lined up before 2nd toll 100km/(100km/hr)= 1
booth? hr
 A: 62 minutes
Introduction 1-62
Caravan analogy (more)
100 km 100 km
ten-car toll toll
caravan booth booth

 suppose cars now “propagate” at 1000 km/hr

 and suppose toll booth now takes one min to service a car
 Q: Will cars arrive to 2nd booth before all cars serviced at first
booth?
 A: Yes! after 7 min, 1st car arrives at second booth; three
cars still at 1st booth.

Introduction 1-63
Queueing delay (revisited)

average queueing
 R: link bandwidth (bps)

delay
 L: packet length (bits)
 a: average packet arrival
rate
traffic intensity
= La/R
 La/R ~ 0: avg. queueing delay small La/R ~ 0

 La/R -> 1: avg. queueing delay large

 La/R > 1: more “work” arriving
than can be serviced, average delay infinite!

* Check out the Java applet for an interactive animation on queuing and loss La/R -> 1
Introduction 1-64
“Real” Internet delays and routes
 what do “real” Internet delay & loss look like?
 traceroute program: provides delay
measurement from source to router along end-
end Internet path towards destination. For all i:
 sends three packets that will reach router i on path
towards destination
 router i will return packets to sender
 sender times interval between transmission and reply.

3 probes 3 probes

3 probes

Introduction 1-65
“Real” Internet delays, routes
traceroute: gaia.cs.umass.edu to www.eurecom.fr
3 delay measurements from
gaia.cs.umass.edu to cs-gw.cs.umass.edu
1 cs-gw (128.119.240.254) 1 ms 1 ms 2 ms
2 border1-rt-fa5-1-0.gw.umass.edu (128.119.3.145) 1 ms 1 ms 2 ms
3 cht-vbns.gw.umass.edu (128.119.3.130) 6 ms 5 ms 5 ms
4 jn1-at1-0-0-19.wor.vbns.net (204.147.132.129) 16 ms 11 ms 13 ms
5 jn1-so7-0-0-0.wae.vbns.net (204.147.136.136) 21 ms 18 ms 18 ms
6 abilene-vbns.abilene.ucaid.edu (198.32.11.9) 22 ms 18 ms 22 ms
7 nycm-wash.abilene.ucaid.edu (198.32.8.46) 22 ms 22 ms 22 ms trans-oceanic
8 62.40.103.253 (62.40.103.253) 104 ms 109 ms 106 ms
9 de2-1.de1.de.geant.net (62.40.96.129) 109 ms 102 ms 104 ms link
10 de.fr1.fr.geant.net (62.40.96.50) 113 ms 121 ms 114 ms
11 renater-gw.fr1.fr.geant.net (62.40.103.54) 112 ms 114 ms 112 ms
12 nio-n2.cssi.renater.fr (193.51.206.13) 111 ms 114 ms 116 ms
13 nice.cssi.renater.fr (195.220.98.102) 123 ms 125 ms 124 ms
14 r3t2-nice.cssi.renater.fr (195.220.98.110) 126 ms 126 ms 124 ms
15 eurecom-valbonne.r3t2.ft.net (193.48.50.54) 135 ms 128 ms 133 ms
16 194.214.211.25 (194.214.211.25) 126 ms 128 ms 126 ms
17 * * *
18 * * * * means no response (probe lost, router not replying)
19 fantasia.eurecom.fr (193.55.113.142) 132 ms 128 ms 136 ms

* Do some traceroutes from exotic countries at www.traceroute.org

Introduction 1-66
Packet loss
 queue (aka buffer) preceding link in buffer has finite
capacity
 packet arriving to full queue dropped (aka lost)
 lost packet may be retransmitted by previous node,
by source end system, or not at all

buffer
(waiting area) packet being transmitted
A

B
packet arriving to
full buffer is lost
* Check out the Java applet for an interactive animation on queuing and loss Introduction 1-67
Throughput
 throughput: rate (bits/time unit) at which bits
transferred between sender/receiver
 instantaneous: rate at given point in time
 average: rate over longer period of time

server,
server withbits
sends linkpipe
capacity
that can carry linkpipe
capacity
that can carry
file of into
(fluid) F bitspipe Rs bits/sec
fluid at rate Rc bits/sec
fluid at rate
to send to client Rs bits/sec) Rc bits/sec)

Introduction 1-68
 Suppose a MP3 file = 32Million bits, the

Throughput
Server has the transmission rate of Rs= 2Mbps
You have an access link of Rc=1Mbps.
The time needed to transmit the file =

 Rs < Rc What is average end-end throughput?

Rs bits/sec Rc bits/sec

 Rs > Rc What is average end-end throughput?

Rs bits/sec Rc bits/sec

bottleneck link
link on end-end path that constrains end-end throughput
Introduction 1-69
Throughput: Internet scenario

 per-connection end-
end throughput: Rs
min(Rc,Rs,R/10) Rs Rs
 in practice: Rc or Rs
is often bottleneck
R

Rc Rc

Rc

10 connections (fairly) share

backbone bottleneck link R bits/sec
Introduction 1-70
Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-71
Protocol “layers”
Networks are complex,
with many “pieces”:
 hosts Question:
 routers is there any hope of
 links of various organizing structure of
media network?
 applications
 protocols …. or at least our
 hardware, discussion of networks?
software

Introduction 1-72
Organization of air travel
ticket (purchase) ticket (complain)

baggage (check) baggage (claim)

gates (load) gates (unload)

runway takeoff runway landing

airplane routing airplane routing

airplane routing

 a series of steps

Introduction 1-73
Layering of airline functionality

ticket (purchase) ticket (complain) ticket

baggage (check) baggage (claim baggage

gates (load) gates (unload) gate

runway (takeoff) runway (land) takeoff/landing

airplane routing airplane routing airplane routing airplane routing airplane routing

departure intermediate air-traffic arrival

airport control centers airport

layers: each layer implements a service

 via its own internal-layer actions
 relying on services provided by layer below

Introduction 1-74
Why layering?
dealing with complex systems:
 explicit structure allows identification,
relationship of complex system’s pieces
 layered reference model for discussion
 modularization eases maintenance, updating of
system
 change of implementation of layer’s service
transparent to rest of system
 e.g., change in gate procedure doesn’t affect rest of
system
 layering considered harmful?

Introduction 1-75
TCP/IP Protocol Architecture
 Developed by the US Defense Advanced Research
Project Agency (DARPA) for its packet switched
network (ARPANET)
 Used by the global Internet
 No official model but a working one.
 Application layer
 Host to host or transport layer
 Internet layer
 Network access layer
 Physical layer

Introduction 1-76
Physical Layer
 Physical interface between data transmission device
(e.g. computer) and transmission medium or
network
 Characteristics of transmission medium
 Signal levels
 Data rates
 etc.

Introduction 1-77
Network Access Layer
 Exchange of data between end system and network
 Destination address provision
 Invoking services like priority

Introduction 1-78
Internet Layer (IP)
 Systems may be attached to different networks
 Routing functions across multiple networks
 Implemented in end systems and routers

Introduction 1-79
Transport Layer (TCP)
 Reliable delivery of data
 Ordering of delivery

Introduction 1-80
Application Layer

 Support for user applications

 e.g. http, SMTP

Introduction 1-81
TCP/IP Protocol Architecture
Model

Introduction 1-82
OSI Model
 Open Systems Interconnection
 Developed by the International Organization
for Standardization (ISO)
 Seven layers
 A theoretical system delivered too late!
 TCP/IP is the de facto standard

Introduction 1-83
Internet protocol stack
 application: supporting network
applications
 FTP, SMTP, HTTP application
 transport: process-process data
transfer transport
 TCP, UDP
network
 network: routing of datagrams
from source to destination
link
 IP, routing protocols
 link: data transfer between physical
neighboring network elements
 Ethernet, 802.111 (WiFi), PPP
 physical: bits “on the wire”
Introduction 1-84
ISO/OSI reference model
 presentation: allow applications
to interpret meaning of data, application
e.g., encryption, compression,
machine-specific conventions presentation
 session: synchronization, session
checkpointing, recovery of data transport
exchange
network
 Internet stack “missing” these
layers! link
 these services, if needed, must be physical
implemented in application
 needed?

Introduction 1-85
OSI v TCP/IP

Introduction 1-86
 message M
source
application
Encapsulation
segment Ht M transport
datagram Hn Ht M network
frame Hl Hn Ht M link
physical
link
physical

switch

destination Hn Ht M network
M application Hl Hn Ht M link Hn Ht M
Ht M transport physical
Hn Ht M network
Hl Hn Ht M link router
physical

Introduction 1-87
Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-88
Network security
 field of network security:
 how bad guys can attack computer networks
 how we can defend networks against attacks
 how to design architectures that are immune to
attacks
 Internet not originally designed with (much)
security in mind
 original vision: “a group of mutually trusting users
attached to a transparent network” 
 Internet protocol designers playing “catch-up”
 security considerations in all layers!

Introduction 1-89
Bad guys: put malware into hosts via Internet
 malware can get in host from:
 virus: self-replicating infection by receiving/executing
object (e.g., e-mail attachment)
 worm: self-replicating infection by passively receiving
object that gets itself executed
 spyware malware can record keystrokes, web
sites visited, upload info to collection site
 infected host can be enrolled in botnet, used for
spam. DoS attacks

Introduction 1-90
Bad guys: attack server, network infrastructure
Denial of Service (DoS): attackers make resources
(server, bandwidth) unavailable to legitimate traffic
by overwhelming resource with bogus traffic

1. select target
2. break into hosts around
the network (see botnet)
3. send packets to target from
compromised hosts
target

Introduction 1-91
Bad guys can sniff packets
packet “sniffing”:
 broadcast media (shared ethernet, wireless)
 promiscuous network interface reads/records all packets
(e.g., including passwords!) passing by

A C

src:B dest:A payload

B

 wireshark software used for end-of-chapter labs is a

(free) packet-sniffer
Introduction 1-92
Bad guys can use fake addresses
IP spoofing: send packet with false source address
A C

src:B dest:A payload

… lots more on security (throughout, Chapter 8)

Introduction 1-93
Chapter 1: roadmap
1.1 what is the Internet?
1.2 network edge
 end systems, access networks, links
1.3 network core
 packet switching, circuit switching, network structure
1.4 delay, loss, throughput in networks
1.5 protocol layers, service models
1.6 networks under attack: security
1.7 history

Introduction 1-94
Internet history
1961-1972: Early packet-switching principles
 1961: Kleinrock -  1972:
queueing theory shows  ARPAnet public demo
effectiveness of packet-  NCP (Network Control
switching Protocol) first host-host
 1964: Baran - packet- protocol
switching in military nets  first e-mail program
 1967: ARPAnet  ARPAnet has 15 nodes
conceived by Advanced
Research Projects
Agency
 1969: first ARPAnet
node operational

Introduction 1-95
Internet history
1972-1980: Internetworking, new and proprietary nets

 1970: ALOHAnet satellite

network in Hawaii Cerf and Kahn’s
 1974: Cerf and Kahn - internetworking principles:
architecture for interconnecting  minimalism, autonomy - no
networks internal changes required to
 1976: Ethernet at Xerox PARC interconnect networks
 best effort service model
 late70’s: proprietary
architectures: DECnet, SNA,  stateless routers
XNA  decentralized control
 late 70’s: switching fixed length define today’s Internet
packets (ATM precursor) architecture
 1979: ARPAnet has 200 nodes

Introduction 1-96
Internet history
1980-1990: new protocols, a proliferation of networks

 1983: deployment of  new national networks:

TCP/IP Csnet, BITnet, NSFnet,
 1982: smtp e-mail Minitel
protocol defined  100,000 hosts connected
 1983: DNS defined for to confederation of
name-to-IP-address networks
translation
 1985: ftp protocol defined
 1988: TCP congestion
control

Introduction 1-97
Internet history
1990, 2000’s: commercialization, the Web, new apps
 early 1990’s: ARPAnet late 1990’s – 2000’s:
decommissioned  more killer apps: instant
 1991: NSF lifts restrictions on messaging, P2P file sharing
commercial use of NSFnet  network security to
(decommissioned, 1995) forefront
 early 1990s: Web  est. 50 million host, 100
 hypertext [Bush 1945, million+ users
Nelson 1960’s]  backbone links running at
 HTML, HTTP: Berners-Lee Gbps
 1994: Mosaic, later Netscape
 late 1990’s:
commercialization of the Web

Introduction 1-98
Internet history
2005-present
 ~750 million hosts
 Smartphones and tablets
 Aggressive deployment of broadband access
 Increasing ubiquity of high-speed wireless access
 Emergence of online social networks:
 Facebook: soon one billion users
 Service providers (Google, Microsoft) create their own
networks
 Bypass Internet, providing “instantaneous” access
to search, emai, etc.
 E-commerce, universities, enterprises running their
services in “cloud” (eg, Amazon EC2)

Introduction 1-99
Introduction: summary
covered a “ton” of material! you now have:
 Internet overview  context, overview, “feel”
 what’s a protocol? of networking
 network edge, core, access  more depth, detail to
network follow!
 packet-switching versus
circuit-switching
 Internet structure
 performance: loss, delay,
throughput
 layering, service models
 security
 history

Introduction 1-100