Scribd
Upload
44 views

Digital Signal Processing Dec2021

This document contains a 20 question exam for a Digital Signal Processing course. The exam covers 5 modules: 1) Filtering of long sequences, 2) Discrete Fourier Transform, 3) Fast Fourier Transform, 4) Multi-rate signal processing, and 5) DSP processors. Questions include deriving algorithms, designing filters, calculating transforms, and explaining concepts such as aliasing, quantization noise, and applications of DSP processors. The exam tests students' understanding of key topics in digital signal processing.

Uploaded by

adith t m
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

Digital Signal Processing Dec2021

This document contains a 20 question exam for a Digital Signal Processing course. The exam covers 5 modules: 1) Filtering of long sequences, 2) Discrete Fourier Transform, 3) Fast Fourier Transform, 4) Multi-rate signal processing, and 5) DSP processors. Questions include deriving algorithms, designing filters, calculating transforms, and explaining concepts such as aliasing, quantization noise, and applications of DSP processors. The exam tests students' understanding of key topics in digital signal processing.

Uploaded by

adith t m
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

B 1100ECT303122103

Reg No.:

APJ ABDUL KALAM TECHNOLOGICAL


Fifth Semester B.Tech Degree Examination December 2021 (2019
Course Code: ECT303
Course Name: DIGITAL SIGNAL PROCESSING
Max. Marks: 100 Duration:3 Hours
PART A
(Answer all questions; each question caties 3 marks) Marks

I What are the methods of filtering long sequence? explain. 3

2 Give any three properties of DFT. 3

3 Calculate the 4- point DFT of cos(zn) 3


rl
4 Find Circular time reversal of [8, 5, 3, l] 3

5 Approximation
Explain the design steps of IIR filter using Butterworth 3

6 What is the advantages of frequency sampling technique in FIR filter design 3

7 What is Cascade implementation of IIR filter? 3

8 What is a linear phase filter? What conditions are to be satisfied by an FIR 3


flter in order to have linear phase?

9 Give any three differences between DSP processor and general purpose 3
microprocessors.

10 Write down any three applications of DSP Processor.

PART B
(Answer one.full question _from each module, each question canies 14 marks)

' Module -1
ll a) Using an example elaborate the working of Overlap Save method while filtering a 7

long sequence with small sequence

b) Differentiate between Overlap methods and normal fiItering 7

12 a) Explain how DFT can be used as a linear Transformation 7

b) Calculate the DFT of [3, 19,6 ,15]. Also plot the magnitude and phase 7
response

Module -2

l3 a) Derive the Decimation in Time algorithm for Fast Fourier transform.

Page 1 of 2
1100ECT3A3122t03

b) Find the DFT of [3,4,8,1] using the above method 7

14 a) Illustrate the procedure for finding IDFT using radix-2FFT algorithm 5

b) Find the IDFT of fI5,2l,2,l3l using the above method 9

Module -3

15 a) 10
Design a digital Butter worth lowpass filter satisfying the constraints

0.707 < ltt(e;')1


lHl"r';;
Using bilinear Transformation, T:1 Sec

b) What is Gibb's phenomenon? 4

16 a) Design a maximally flat analog filter of order 2 with cut-off frequency 0.6 4
rad/sec

b) Design a digital lowpass filter and implement the above question using 10
Impulse Invariance method.

Module -4

T7 a) Obtain the Direct form-I ,Direct form-Il cascade and parallel form realization 10
of y[n]: - 0.1 y[n-l] + 0.2yln-21 + 3 x[n] + 3.6 x[n-l] + 0.6xln-21
b) Find the impulse response of a filter given by H(Z) - t - Z-1 + 2Z-1 + 4
3Z-1 + \Z-L. Does this represent a linear phase realizatior.J? Comment.
18 a) Represent the output of a signal being upsampled by a factor of 3, then down
sampled by a factor of 12 followed by upsampled by a factor of 4

b) Explain what is aliasing in Multi-rate signal processing. What is the use of


Anti-aliasing filter? Explain.

Module -5
19 a) In detail, explain the architecture of DSP Processor TMS 320C6713 7

b) Illustrate the quantisation noise in ADC. 7

20 a) List out the advantages and disadvantages of floating point DSP Processors. 7

b) Explain the usage of a DSP Processor for any two day to day applications. 7

Page 2 of 2

You might also like