Scribd
Upload
92 views2 pages

Adss Span 100

The document summarizes the characteristics and specifications of an optical cable. It has a loose tube construction with jelly-filled tubes around a central strength member. It can contain up to 48 fibers with different color codes for easy identification. The cable has specified parameters for diameter, weight, tensile strength, crush resistance, and allows for a maximum span of 100 meters. It also lists the test methods and acceptance conditions for the cable's mechanical and environmental performance. Finally, it provides details on the characteristics of the G652D optical fibers contained within the cable.

Uploaded by

KFD KFD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views2 pages

Adss Span 100

The document summarizes the characteristics and specifications of an optical cable. It has a loose tube construction with jelly-filled tubes around a central strength member. It can contain up to 48 fibers with different color codes for easy identification. The cable has specified parameters for diameter, weight, tensile strength, crush resistance, and allows for a maximum span of 100 meters. It also lists the test methods and acceptance conditions for the cable's mechanical and environmental performance. Finally, it provides details on the characteristics of the G652D optical fibers contained within the cable.

Uploaded by

KFD KFD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADSS

Characteristic of Optical Cable

➢ Min. bending radius for installation


Static: 10 x cable diameter
Dynamic: 20 x cable diameter

➢ Application temperature range


Operation: - 20℃ ~ +70℃
Installation: -20℃ ~ +70℃
Storage/transportation: - 20℃ ~ +70℃

Cable Specification:

Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength
member, polyester yarns used to bind the cable core, water blocking tape wrapped of the cable core, aramid yarn
reinforced and PE outer sheath.

. Cable structure and parameter


SN Item Unit Value
1 No. of fibers count 6 12/24 36 48
2 No. of fibers per tube count 2 4 6 12
3 No. of elements count 6 6 6 6
4 Cable diameter (±5%) mm 12.1 12.1 12.1 12.7
5 Cable weight (±10%) kg/km 101 104 103 116
6 MAT (MAX. Allowable Working tension) N 4000
7 Short term crush N/100mm 1000
8 Max Span m 100
9 Ice thickness mm 0
10 Wind speed m/s 30

Fiber color code


1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Gray White Red Black Yellow Purple Pink Aqua
Color codes for loose tube
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Gray White Red Black Yellow Purple Pink Aqua

WWW.COMCAST-SA.COM COMCAST-SA MAIL: [email protected]


Main mechanical & environmental performance test
Item Test Method Acceptance Condition
- Load: Maximum installation tension
Tensile Strength - Fiber strain  0.33%
- Length of cable: about 50m
IEC 60794-1-2-E1 - No fiber break and no sheath damage.
- Load time: 1min
Crush Test - Load: Short term crush - Loss change  0.1dB@1550nm
IEC 60794-1-2-E3 - Load time: 1min - No fiber break and no sheath damage.
- Points of impact: 3
Impact Test
- Times of per point: 1 - No fiber break and no sheath damage.
IEC 60794-1-2-E4
- Impact energy: 10J
Torsion - Twist angle: ±360°
- No fiber break and no sheath damage.
IEC 60794-1-2-E7 - No. of cycle: 10
- Diameter of mandrel:20 x OD
Cable bend
- Number of turns:4 - No fiber break and no sheath damage.
IEC 60794-1-2-E11
- Number of cycles:3
- Height of water: 1m
Water Penetration - No water leak from the cable core of the
- Sample length: 3m
IEC 60794-1-2-F5B opposite end
- Time: 24h

Characteristic of Optical Fiber

G652D fiber information

Mode field diameter (1310nm): 9.2m0.4m


Mode field diameter (1550nm): 10.4m0.8m
Cut off wavelength of cabled fiber (cc): 1260nm
Attenuation at 1310nm: 0.36dB/km
Attenuation at 1550nm: 0.22dB/km
Bending loss at 1550nm (100 turns, 30mm radius): 0.05dB
Dispersion in the range 1288 to 1339nm: 3.5ps/ (nm•km)
Dispersion at 1550nm: 18ps/ (nm•km)
Dispersion slope at zero dispersion wavelength: 0.092ps/ (nm2•km)

WWW.COMCAST-SA.COM COMCAST-SA MAIL: [email protected]

You might also like