ADU4516R0

DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m

Antenna Specifications
Electrical Properties
Frequency range (MHz) 790 - 862 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable
0°
0 6°
6 12°
12 0°
0 6°
6 12°
12
Gain (dBi)
15.8 16.0 15.7 16.3 16.8 16.3
Side lobe suppression (Typ.) (dB) 0° 6° 12° 0° 6° 12°
-for first side lobe above main beam 20 20 17 20 20 17
-within 0° - 15° sector above horizon 16 16 15 16 15 15
Horizontal 3dB beam width (°) 69 65
Vertical 3dB beam width (°) 10.5 9.4
VSWR < 1.5
Intra-system: ≥ 30
Isolation between ports (dB)
Interr-system (790 - 862 // 880 - 960 MHz): ≥ 30
Front to back ratio, copolar (dB) > 25 Typ. 28
0° Typ. 23 Typ. 25
Cross polar ratio (dB)
±60° > 10 > 10
Max. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Squint (°) Typ. 2.0
Tracking (dB) Avg. 1.0 (within 10dB HBW)
Impedance (Ω) 50
Grounding DC Ground

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 259 x 135
Packing dimensions (H x W x D) (mm) 2275 x 300 x 190
Antenna weight (kg) 21.5
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 29.7 (Included clamps)
Mast diameter supported (mm) 50
0 - 115
Radome material Fib
berglass
Radome colour Lig
ght grey
Operational temperature (℃) 0 .. +65
-40
Frontal: 685 (at 150 km/h)
1889
1999

Wind load (N) Lateral: 360 (at 150 km/h)

Rear side: 910 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 4 x 7/16 DIN Female
Connector position B
Bottom

Accessories
Item Model Description Weigh
ht Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 12 ° 1.9 kg

g 1 (Separate packing)

1
 ADU4516R0
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m

Integrated RCU Specifications

Prope
erties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 ((stand by)
y)
Adjustment time (full range) (s) < 37 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
D
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a ven ndor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 550

024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N: HWMxxx….r

HWMxxx…rr

r - Red

790 - 862 MHz 880 - 960 MHz

Huawei Technologies Co., Ltd. Bantian, Longgang Dis

strict, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2013-09-01