2022

GENERAL PRODUCT
CATALOG

www.teknoline.net
 ABOUT US

All Local,
Advanced Technology

Established in 2006, Teknoline Teknolojik Sistemleri A.Ş. operates on Satellite, Cable TV,
Terrestrial Antenna and Fiber Optic Distribution systems. Production, design and application are
made using 100% domestic and advanced technology.

Teknoline Teknolojik Sistemleri A.Ş., which is the establishment of the Tekniksat

Group, which is the pioneer of Fiber Optic central satellite systems, uses the world's most
advanced technology in satellite distribution systems. Customer satisfaction and quality
prioritized by improving work in this direction has aimed to continue.

Our group wants to be the leader in the products it develops and the added value it brings to the sector.
Our products are the choice of large projects and are used safely in 25 countries.

Tekniksat Group with Teknoline Teknolojik Sistemleri A.Ş. aims to open up its modern
products which are completely Turkish technology design software by following the technological
studies and new developments in the world closely with technological developments and
technological developments in the world. Our group serves modern technological methods with an
understanding that attaches great importance to sales and after services.

Also,
Tübitak supported projects in the central satellite, camera and intercom systems with
fiber optic infrastructure provides uninterrupted project and product support. Teknoline
Teknoline is the only company that has design, production, R&D and project services in its field. The
products produced in Turkey are introduced in the domestic and international exhibitions.
WHAT WE DO?
The main factor in our success is; we are constantly investing in the field of R&D. The
software and designs of the produced devices are made by our technical team.

Exploring new information and technologies in our sector and reviewing our existing
methods constitute our strategy in this field. This strategy allows us to develop new products.

After the necessary measurements with technical devices in our R&D department, we
make our own designs and software for the needs of the market. In addition, the designed cards are
ordered by their own SMD machines and tested by themselves. According to the results of the R&D,
the production phase is starts. Our company has all the potential possibilities from production to
packaging, from barcoding to shipping.

Some of the products we design and market in our R & D are:

• SATELLITE AND SIDE PRODUCTS

• FIBER OPTIC MULTISWITCH

• FIBER OPTIC RECEIVER

• FIBER OPTIC TRANSMITTER

• MULTISWITCH VE SIDE PRODUCTS

• DEMODULATOR VE HEADEND PRODUCTION

• SAT AMPLIFIER (950MHZ - 2150 MHZ)

• DIGITAL HEADEND PRODUCTION

• BUS TV SYSTEMS

• SMART HOME SYSTEMS

 OUR MACHINE PARK

• SAMSUNG SM 411 SMD SORTING MACHINE

• SAMSUNG SM 411 F SMD SORTING MACHINE
• GENESIS 608E 8 ZONE REFLOW OVEN
• SMP700 SMD PRINTER
• HP 8714B RF NETWORK ANALYZER (300KHZ-3000MHZ) 2 AD
• ROHDE&SCHWARZ SPECTRUM ANALYZER (9KHZ-18000MHZ)
• ANRITSU MS9710C OPTICAL SPECTRUM ANALYZER (0.6-1.75UM)
• HP8970B NOISE FIGURE METER
• TT TECNIC DC POWER SUPPLY
• GW INSTEK LCR 819 LCR METER
• LPT-3000 SPECTRUM ANALYZER (9KHZ-3000MHZ)
• TEKTRONIX MSO 3014 OSCILLOSCOPE
• TEKTRONIX VM700T VIDEO MEASUREMENT SET
• TEKTRONIX CSA803A COMMUNICATION ANALYZER
4
MUL T ISWITCH
Central Satellite Systems

10 Series
17 Series

5 Series

14 Series
9 Series

5
 5 SERIES MULTISWITCH
General Features
• High insulated from each individual subscriber outputs
• High insulated SMPS power supply
• Able to work on low signals due to the high gain on subscriber
outputs
• Easy and compact installation
• Low power usage due to new generation smd components
• LNB supply feature 13 - 18V
Subscriber Output
• Quad & Quattro LNB usage feature
• Up to 100 volt subscriber port protection
• 100 m distribution length per subscriber
• Led subscriber control system Cascade Output
• 1 dB gain between first and last subscriber
• 13-18V 22 KHz circuit

TECHNICIAL SPECIFICATIONS TMS 5X8 K TMS 5X8 TMS 5X12 K TMS 5X12 TMS 5X16 K TMS 5X16
Input SAT/IF 4 4 4 4 4 4
Terr. 1 1 1 1 1 1
Subscriber Outputs 8 8 12 12 16 16
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +3dB±1 +3dB±1 +3dB±1 +3dB±1
Terr. -1dB±1 -3dB±1 -3dB±1 +1dB±1 -3dB±1 +1dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -2dB±1 -2dB±1 -3dB±1
Terr. -5dB±1 -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quattro Quattro Quattro Quattro Quattro Quattro
Current on Subscriber Output 48mA 48mA 48mA 48mA 48mA 48mA
Current on System 130mA 130mA 130mA 130mA 130mA 130mA
The current on system with LNB 630mA 630mA 630mA 630mA 630mA 630mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 135x135x45 135x135x45 135x160x45 135x160x45 135x190x45 135x190x45
Weight 346 gr. 346 gr. 411 gr. 411 gr. 465 gr. 465 gr.

6 %100
Geri Dönüşüm
5 SERIES MULTISWITCH

Subscriber LED

TECHNICIAL SPECIFICATIONS TMS 5X24 K TMS 5X24 TMS 5X32 K TMS 5X32
Input SAT/IF 4 4 4 4
Terr. 1 1 1 1
Subscriber Outputs 24 24 32 32
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +2dB±1 +2dB±1
Terr. -3dB±1 +1dB±1 -8dB±1 -4dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -3dB±1 -5dB±1
Terr. -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB
LNB Quattro Quattro Quattro Quattro
Current on Subscriber Output 48mA 48mA 48mA 48mA
Current on System 130mA 130mA 260mA 260mA
The current on system with LNB 630mA 630mA 760mA 760mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 135x275x45 135x275x45 135x320x45 135x320x45
Weight 625 gr. 625 gr. 723 gr. 723 gr.

%100
7
Geri Dönüşüm
 9 SERIES MULTISWITCH
General Features
• High insulated from each individual subscriber outputs
• High insulated SMPS power supply
• Able to work on low signals due to the high gain on subscriber
outputs
• Easy and compact installation
• Low power usage due to new generation smd components
• LNB supply feature 13 - 18V
Subscriber Output
• Quad & Quattro LNB usage feature
• Up to 100 volt subscriber port protection
• 100 m distribution length per subscriber
• Led subscriber control system Cascade Output

• 1 dB gain between first and last subscriber

• 13-18V 22 KHz circuit

TECHNICIAL SPECIFICATIONS TMS 9X8 K TMS 9X8 TMS 9X12 K TMS 9X12 TMS 9X16 K TMS 9X16
Input SAT/IF 8 8 8 8 8 8
Terr. 1 1 1 1 1 1
Subscriber Outputs 8 8 12 12 16 16
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +3dB±1 +3dB±1 +3dB±1 +3dB±1
Terr. -1dB±1 -3dB±1 -3dB±1 +1dB±1 -3dB±1 +1dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -2dB±1 -2dB±1 -3dB±1
Terr. -5dB±1 -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quattro Quattro Quattro Quattro Quattro Quattro
Current on Subscriber Output 48mA 48mA 48mA 48mA 48mA 48mA
Current on System 130mA 130mA 130mA 130mA 130mA 130mA
The current on system with LNB 630mA 630mA 630mA 630mA 630mA 630mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 200x135x45 200x135x45 200x160x45 200x160x45 200x190x45 200x190x45
Weight 520 gr. 520 gr. 645 gr. 645 gr. 770 gr. 770 gr.

8
 9 SERIES MULTISWITCH
Subscriber LED

TECHNICIAL SPECIFICATIONS TMS 9X20 K TMS 9X20 TMS 9X24 K TMS 9X24 TMS 9X32 K TMS 9X32
Input SAT/IF 8 8 8 8 8 8
Terr. 1 1 1 1 1 1
Subscriber Outputs 20 20 24 24 32 32
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +3dB±1 +3dB±1 +2dB±1 +2dB±1
Terr. -3dB±1 +1dB±1 -3dB±1 +1dB±1 -8dB±1 -4dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -3dB±1 -3dB±1 -5dB±1
Terr. -5dB±1 -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quattro Quattro Quattro Quattro Quattro Quattro
Current on Subscriber Output 48mA 48mA 48mA 48mA 48mA 48mA
Current on System 130mA 130mA 130mA 130mA 260mA 260mA
The current on system with LNB 630mA 630mA 630mA 630mA 760mA 760mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 200x230x45 200x230x45 200x275x45 200x275x45 200x320x45 200x320x45
Weight 825 gr. 825 gr. 1120 gr. 1120 gr. 1370 gr. 1370 gr.

9
 13 SERIES MULTISWITCH
General Features
• High insulated from each individual subscriber outputs On/Off Switch
• High insulated SMPS power supply
• Able to work on low signals due to the high gain on
TMS 13X8 K
subscriber outputs
• Easy and compact installation Subscriber Output
• Low power usage due to new generation smd
components
• LNB supply feature 13 - 18V
• Quad & Quattro LNB usage feature
Cascade Output
• Up to 100 volt subscriber port protection
• 100 m distribution length per subscriber
• Led subscriber control system
• 1 dB gain between first and last subscriber
• 13-18V 22 KHz circuit

TECHNICIAL SPECIFICATIONS TMS 13X8 K TMS 13X8 TMS 13X12 K TMS 13X12 TMS 13X16 K TMS 13X16
Input SAT/IF 12 12 12 12 12 12
Terr. 1 1 1 1 1 1
Subscriber Outputs 8 8 12 12 16 16
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +2dB±1 +2dB±1 +2dB±1 +2dB±1
Terr. -1dB±1 +3dB±1 -2dB±1 +2dB±1 -3dB±1 +1dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -2dB±1 -2dB±1 -3dB±1
Terr. -5dB±1 -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro
Current on Subscriber Output 41mA 41mA 41mA 41mA 41mA 41mA
Current on System 150mA 150mA 150mA 150mA 150mA 150mA
The current on system with LNB 810mA 810mA 810mA 810mA 810mA 810mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 280x135x45 280x135x45 280x160x45 280x160x45 280x190x45 280x190x45
Weight 628 gr. 628 gr. 750 gr. 750 gr. 871 gr. 871 gr.

10 %100
Geri Dönüşüm
13 SERIES MULTISWITCH

Subscriber LED

TECHNICIAL SPECIFICATIONS TMS 13X24 K TMS 13X24 TMS 13X32 K TMS 13X32
Input SAT/IF 12 12 12 12
Terr. 1 1 1 1
Subscriber Outputs 24 24 32 32
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +1dB±1 +1dB±1 +1dB±1 +1dB±1
Terr. -6dB±1 -2dB±1 -8dB±1 -4dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -4dB±1 -5dB±1
Terr. -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB
LNB Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro
Current on Subscriber Output 41mA 41mA 41mA 41mA
Current on System 280mA 280mA 280mA 280mA
The current on system with LNB 940mA 940mA 940mA 940mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 280x275x45 280x275x45 320x280x45 320x280x45
Weight 1168 gr. 1168 gr. 1354 gr. 1354 gr.

%100
Geri Dönüşüm
11
 17 SERIES MULTISWITCH
General Features On/Off Switch

• Birbirinden bağımsız yüksek izolasyonlu abone

çıkışları
• Yüksek izolasyonlu SMPS güç kaynağı TMS 17X8 K
• Abone çıkışlarındaki fazla kazanç sayesinde
düşük sinyallerde çalışabilme
• Kolay ve kompakt kurulum
• Yeni nesil smd kompanentler sayesinde düşük
güç kullanımı
• Lnb besleme özelliği 13 - 18V
• Quad&Quattro LNB kullanım özelliği
• 100 volta kadar abone port koruması
• Abone başına 100 m dağıtım uzunluğu
• Ledli abone kontrol sistemi
• İlk ve son abone arasında 1 Db lik kazanç farkı
• 13-18V 22 khz devresi
Cascade Output Subscriber Output

TECHNICIAL SPECIFICATIONS TMS 17X8 K TMS 17X8 TMS 17X12 K TMS 17X12 TMS 17X16 K TMS 17X16
Input SAT/IF 16 16 16 16 16 16
Terr. 1 1 1 1 1 1
Subscriber Outputs 8 8 12 12 16 16
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +3dB±1 +3dB±1 +2dB±1 +2dB±1 +2dB±1 +2dB±1
Terr. -1dB±1 +3dB±1 -2dB±1 +2dB±1 -3dB±1 +1dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -2dB±1 -2dB±1 -3dB±1
Terr. -5dB±1 -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro
Current on Subscriber Output 41mA 41mA 41mA 41mA 41mA 41mA
Current on System 150mA 150mA 150mA 150mA 150mA 150mA
The current on system with LNB 790mA 790mA 790mA 790mA 790mA 790mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 320x135x45 320x135x45 320x160x45 320x160x45 320x190x45 320x190x45
Weight 753 gr. 753 gr. 835 gr. 835 gr. 1032 gr. 1032 gr.

12
17 SERIES MULTISWITCH

More Subscriber Outputs of the same size thanks

to double-layered Outputs
Subscriber LED

Thanks to the Intermediate Amplifier card,

all equal signal level in subscribers

TECHNICIAL SPECIFICATIONS TMS 17X24 K TMS 17X24 TMS 17X32 K TMS 17X32 TMS 17X48 TMS 17X64
Input SAT/IF 16 16 16 16 16 16
Terr. 1 1 1 1 1 1
Subscriber Outputs 24 24 32 32 48 64
Frequency range SAT/IF 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz 950-2150Mhz
Terr. 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz 47-870 Mhz
Terr Amplifier Terr. 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB 23...25dB
Gain SAT/IF +1dB±1 +1dB±1 +1dB±1 +1dB±1 +2dB±1 +2dB±1
Terr. -6dB±1 -2dB±1 -8dB±1 -4dB±1 -10dB±1 -11dB±1
Equalizer SAT +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1 +4dB±1
Cascade Loss SAT/IF -4dB±1 -5dB±1
Terr. -5dB±1 -5dB±1
Max. Signal Input SAT/IF 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV 98dBµV
Terr. 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV 81dBµV
Max. Signal Output SAT/IF 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV 102dBµV
Terr. 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV 85dBµV
Return Loss Inputs/Outputs 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB 10dB/14dB
Insulation SAT/SAT >33dB >33dB >33dB >33dB >33dB >33dB
SAT/Terr. >37dB >37dB >37dB >37dB >37dB >37dB
LNB Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro Quad&Quattro
Current on Subscriber Output 41mA 41mA 41mA 41mA 41mA 41mA
Current on System 280mA 280mA 280mA 280mA 360mA 360mA
The current on system with LNB 920mA 920mA 920mA 920mA 1020mA 1020mA
Operating temperature -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C° -15…+40C°
Dimensions 320x275x45 320x275x45 320x320x45 320x320x45 320x275x90 320x320x90
Weight 1314 gr. 1314 gr. 1530 gr. 1530 gr. 1837 gr. 2173 gr.

13
 MULTISWITCH
TMS 17/16
4 Uydu 160 Abone
Merkezi Dağıtım Diyagramı

14 %100
Geri Dönüşüm
 PROFESSIONAL
MUL T ISWITCH
Central satellite systems

RACK TYPE MULTISWITCH

ETHERNET MULTISWITCH

TAP MULTISWITCH

15
 CENTRAL SATELLITE SYSTEM
LNB BACKUP
TLR 4X
LNB VOLTAGE SYSTEM VOLTAGE SAT RF SIGNAL and LNB SAT MANUAL
ON / OFF Switch CONTROL LEDS VOLTAGE CONTROL LEDS SELECTION KEY

TECHNICIAL SPECIFICATIONS General Specifications

Input 8 F Connector
2 satellites (8 polarities) Quad Quattro C-band LNB
Output 4 F Connector
Pass Loss 6 dB Support 950-2150 MHz (SatIF) operating bandwidth
Isolation > 40dB RF signal led indicator
Return > 15dB Automatic satellite selection (backup)
Minimum Input Level 65dBuV Manual switch to desired satellite
Power Consumption 24Vdc 220mA (No LNB) LNB voltage control on-off switch
Power Supply 2x220V AC 50W
LNB voltage led indicator
Operating Temperature -15...+40Cº
LED control feature for each polarity
Dimensions 483x285x45mm
LNB voltage short circuit protection
Weight 1350 gr
Double feed feature
Easy installation and application

16 %100
Geri Dönüşüm
17
 Bestseries

Satellite Multiswitch, Do any that clon't require power supply?

IJMM&ffi@iit41
18
19
 PROFESSIONAL MULTISWITCH
Rack Type Multiswitch

TRS 17/32 TRS 10/32

Main Features
TECHNICAL TRS 17/32 TRS 10/32 TRS 5/32
SPECIFICATIONS • Double power supply
Input SAT / IF 16 9 4 • Active TERR input (passive input available)
TERR 1 1 1
• Easy mounting to 19” 2U Rack Cabins
Receiver Subsriber Output 32 32 32
• Tap transition loss 0.5dB
Cascadable loop-through SAT / IF 16 9 4
Outputs TERR 1 1 1 • 8 consecutive cascade connection
TERR Gain 23...25dB 23...25dB 23...25dB • High isolation due to PCB type F connectors
Selection of LNB / Polarity 13V, 18V, 13V22KHz, 18V • LED indicators for each subscriber outputs
Frequency Range SAT / IF 950-2150MHz 950-2150MHz 950-2150MHz
• LNB on/off switch
TERR 47-870MHz 47-870MHz 47-870MHz
Tap-loss Subscriber Outputs SAT / IF @ 950MHz +1dB±1 +1dB±1 +1dB±1 • Highly isolated industrial power supply
SAT / IF @ 2150MHz +1dB±1 +1dB±1 +1dB±1 • Can work at low signals due to high gain at subscribers outputs
TERR. Rec / Out 1-8 -4dB±2 -4dB±2 -4dB±2 • Easy and compact installation
TERR. Rec / Out 9-16 -4dB±2 -4dB±2 -4dB±2
• Low power consumption due to new generation of SMD
TERR. Rec / Out 17-24 -4dB±2 -4dB±2 -4dB±2 components
TERR. Rec / Out 24-36 -4dB±2 -4dB±2 -4dB±2
• LNB supply 13-18V
Max. Input Level SAT / IF 98dBµV 98dBµV 98dBµV
• Quad&Quattro LNB usage feature
TERR 88dBµV 88dBµV 88dBµV
Max. Output Level SAT / IF IMA3 102dBµV 102dBµV 102dBµV • Subscriber port protection up to 100 volts
TERR 85dBµV 85dBµV 85dBµV • Ergonomic and stylish design
Return-loss Input / Output 10dB / 14dB 10dB / 14dB 10dB / 14dB
• Uninterrupted air circulation due to 2 separate fans
Isolation SAT-SAT >33dB >33dB >33dB
• +4dB equalizer at each subscriber outputs for the loss in high
SAT-TV >37dB >37dB >37dB frequencies
Usable LNBs Quad&Quattro Quattro Quattro
• 950-2150MHz and 47-870MHz lossless sharp filter for each
Max. Current from Subscriber 41mA 41mA 41mA subscriber outputs
Output
Max. Current from System 960mA 960mA 960mA • Professional Mean Well industrial supply
Max. Current with LNB 920mA 520mA 520mA • Optimized RF design for the usage of DWB IPTV and Digital
Operating Temperature -85...+50°C -85...+50°C -85...+50°C Headends
Dimensions 320x320x45 320x320x45 320x320x45

20
PROFESSIONAL MULTISWITCH
TRS 17/32
Fiber Optic Infrastructure 4 SAT
Headend Distribution Diagram

21
 PROFESSIONAL MULTISWITCH
THM 10/32 K
Active Tap Multiswitch

20 dB Adjustable
Attenuator

-1 dB Tap Output

2. Cascade Output
TECHNICAL
SPECIFICATIONS Main Features
Tap Output 10 F Connector
Cascade Output 10 F Connektor • Produced for professional projects
Abone Output 32 F Connektor • -1 dB top loss
Frequency - SAT 950-2150 MHz
• Can connect with 2 cascade
Frequency - TERR 47-870 MHz
• Adjustable gain for RF with 2 dB attenuator
SAT Subscriber Output -5dB±1
TERR Subscriber Output -5dB±2 • Independent 20 dB attenuator settings for
each polarity
Tap Output -1dB
SAT Cascade Loss -6dB ± 1 • LNB on/off switch
TERR Cascade Loss -5dB ± 2 • Lineer terrestrial broadcast due to taps in each
Attenuator Range 0...20dB subscriber
Max. SAT Input 105dB ±5 • LED warning system
Max. TERR Input 105Db ±5
• Extra SAT filter and IF amplifier on each
Isolation SAT - SAT >35dB
polarity input
Isolation SAT - TERR >40dB
• High isolated independent subscriber outputs
Drawn Current 1200mA
Operating Voltage 18V 2500mA • High isolated SMPS power supply
Operating Temperature -25...+50C° • Can work at low signals due to high gain in
Dimensions 380x235x50mm subscriber outputs
Weight 1900 gr • Easy and compact installation

22
PROFESSIONAL MULTISWITCH
THM 10/32 K
Tap Multiswitch with 3 Satellite Centers
Distribution Diagram

23
 PROFESSIONAL MULTISWITCH
TTM 17/32
Tap Multiswitch
Designed for Big Projects

-1 dB Tap Output

-8 dB

-12 dB -16 dB

Tap types are available.

Main Features TECHNICAL

• Produced for professional projects SPECIFICATIONS
Input 17 F Connektor
• -1 dB top loss
Tap Output 17 F Connektor
• Can connect with 2 cascade Kaskat Output 17 F Connektor
• Adjustable gain for RF with 2 dB attenuator Subscriber Output 32 F Connektor
SAT Frequency Range 950-2150MHz
• Independent 20 dB attenuator settings for each polarity
TERR Frequency Range 47-870MHz
• LNB on/off switch
SAT Subscriber Gain -15dB±1
• Lineer terrestrial broadcast due to taps in each subscriber TERR Subscriber Gain -15dB±2
• LED warning system Tap Gain -1 dB
Attenuator Range 0...20dB
• Extra SAT filter and IF amplifier on each polarity input
Max. SAT Level Input 105dB ±5
• High isolated independent subscriber outputs Max. TERR Level Input 105dB ±5
• High isolated SMPS power supply Isolation SAT - SAT >35dB
Isolation SAT - TERR >40dB
• Can work at low signals due to high gain in subscriber outputs
Drawn Current 900mA
• Easy and compact installation
Power Supply 18V 2500mA
• Lower power consumption due to new generation of SMD Operating Temperature -25...+50C°
components
Dimensions 360x330x20 mm
• Compability with Digiturk systems Weight 2300 gr
• Quattro LNB usage support

• Subscriber port protection up to 100V 24

PROFESSIONAL MULTISWITCH
TTM 17/32
Tap Multiswitch with 4 Satelllite Centers
Distribution Diagram

25
 M U LT I S W I T C H
DISTRIBUTING SYSTEMS

PROFESSIONAL AMPLIFIER

GROUP TAP

GROUP SPLITTER

%100
Geri Dönüşüm
 PROFESSIONAL AMPLIFIER
TMA 17/30 D
Double Amplifier
(4 SAT 1 RF)

This product is used after the dish antenna or where the signal is weakened.
It can gain 30 dB due to the high gain amplifier and the special design circuit. Because of weakening of the cable loss at high frequencies, there is a 15 dB
equalizer circuit.
With this circuit, by adjusting the tilt, the meters will be equal to the gain value in all frequencies as our sat curve will have a flat curve.

Main Features TECHNICAL

SPECIFICATONS
·Cascade gain amplifier Input 17 F Connektor
Output 34 F Connektor
·High output level Frequency Range SAT 950-2150 MHz
Frequency Range TERR 47-870 MHz
·Adjustable gain SAT Gain +28dB 5 dB equalizer

·LNB ON OFF switch TERR Gain -4dB

0...20Db
Attenuator Setting
·Short circuit protection Equalize Range 0…15dB

Max. SAT Signal Input 80dB ±10

·High Isolation Max. TERR Signal Input
100dB ±10

·Built for professional projects Isolation >30dB

4200mA
Drawn Current
·High gain and power due to special design Power Supply 220V 50HZ
Operating Temperature -25...+50Cº
·2 separate outputs independent of each other thanks to the divider after the amplifier Dimensions

·20 dB gain and 15 dB equalizer due to attenuator Weight 2895 gr

27
%100
Geri Dönüşüm
 MULTISWITCH AMPLIFIER

TMA 10/10 LC New TMA 17/17 LC

(2 SAT 1 MDU + 1 RF) (4 SAT 1 RF)

As the cable distance between the dish antenna and the multiswitch extends the signal loss occurs and the
amplifier is used to prevent and keep it stable

Main Features TECHNICAL TMA 10/10 LC TMA 17/17 LC

SPECIFICATIONS
·Cascade gain amplifier Frequency Range SAT 950-2150 Mhz 950-2150 Mhz

·High output level Frequency Range TERR

Gain TERR
47-870 Mhz
-1 dB±1
47-870 Mhz
-1 dB±1
·Adjustable gain Gain SAT 19...23 dB (4 dB equalizer) 19...23 dB (4 dB equalizer)
SAT-SAT Isolation >33 dB >33 dB
·LNB ON OFF switch SAT-TERR Isolation >50 dB >50 dB
Max. signal input SAT 90 dBµV 90 dBµV
·Short circuit protection Input SAT + TERR 9+1 16+1
Output SAT + TERR 10 17
·High Isolation Operating Voltage 12V 1,5A 12V 1,5A

·Built for professional projects Total Drawn Current

Drawn Current with LNB
320 mA
760 mA
500 mA
1200 mA

·High gain and power due to special design Operating Temperature

Dimensions
-20 +50ºC
135x60x42mm
-20 +50ºC
210x60x42mm
·2 separate outputs independent of each other thanks to the divider after the amplifier Weight 500gr 800gr

%100
Geri Dönüşüm

28
MULTISWITCH AMPLIFIER
TMA 5/5
(1 SAT 1 RF)

TMA 9/9 TMA 10/10

(2 SAT 1 RF) (2 SAT 1 MDU 1 RF)

TECHNICAL TMA 5/5 TMA 9/9 TMA 10/10

SPECIFICATIONS
Frequency Range SAT 950-2150 Mhz 950-2150 Mhz 950-2150 Mhz
Frequency Range TERR 47-870 Mhz 47-870 Mhz 47-870 Mhz
Gain Setting 20 dB 20 dB 20 dB Main Features
Gain TERR
Gain SAT
-1 dB±1
19...23 dB (4 dB equalizer)
-1 dB±1
19...23 dB (4 dB equalizer)
-1 dB±1
19...23 dB (4 dB equalizer)
· Cascade gain
amplifier
SAT-SAT Isolation >43 dB >43 dB >43 dB
· High output level
SAT-TERR Isolation
Max. signal input SAT
>50 dB
110 dBµV
>50 dB
110 dBµV
>50 dB
110 dBµV
·Adjustable earnings
Input SAT + TERR 4+1 8+1 9+1 ·LNB ON OFF switch
Output SAT + TERR 5 9 10 ·Short circuit
Operating Voltage 16V 1,5A 16V 1,5A 16V 1,5A protection
Total Drawn Current
Drawn Current with LNB
280 mA
600 mA
280 mA
600 mA
310 mA
760 mA
· High Isolation
Operating Temperature -20 +50ºC -20 +50ºC -20 +50ºC
Dimensions 246x120x42mm 246x120x42mm 246x120x42mm
Weight 430gr 670gr 680gr

%100
Geri Dönüşüm 29
 MULTISWITCH AMPLIFIER

TMA- T 10/10
(2 SAT 1 RF)

TMA 14/14 TMA 17/17

(3 SAT 1 MDU 1 RF) (4 SAT 1 RF)

TECHNICAL TMA 14/14 TMA 17/17 TMA- T 10/10 Main Feautes

SPECIFICATIONS
• Cascade gain amplifier
Frequency Range SAT 950-2150 Mhz 950-2150 Mhz 950-2150 Mhz
Frequency Range TERR 47-870 Mhz 47-870 Mhz 47-870 Mhz • High output level
Gain Setting 20 dB 20 dB 20dB
• Short circuit protection
Equalizer Attenuator 0…8dB
Gain TERR -1 dB±1 -1 dB±1 -1dB±1 • High insulation
Gain SAT 19...23 dB (4 dB equalizer) 19...23 dB (4 dB equalizer) 19...23 dB (4 dB equalizer) • Special thanks to the
SAT-SAT Isolation >43 dB >43 dB >43 dB special design
SAT-TERR Isolation >50 dB >50 dB >50 dB
• Gain and power
Max. signal input SAT 110 dBµV 110 dBµV 110 dBµV
Input SAT + TERR 12+1 16+1 9+1 • Voltage LED Indicators
Output SAT + TERR 13 17 10
• Passive terrestrial polarity
Operating Voltage 16V 1,5A 16V 1,5A 16V 1,5A
Total Drawn Current 400 mA 500 mA 410 mA • Highly insulated
Drawn Current with LNB 880 mA 1200 mA 760 mA • High insulated
Operating Temperature -20 +50ºC -20 +50ºC -20 +50ºC
Dimensions 310x120x42mm 410x120x42mm 215x135x45 mm
Weight 840gr 1100gr 800 gr

30
GROUP TAP
ACTIVE TPM 17/33

TPM 10/33

Main Features Main Features

• Active Group Splitter ·Active gain circuit from Terrestrial SAT input
• LNB voltage ON OFF
switch ·LNB feed feature
• LNB short circuit
protection
·Short circuit protection
• Multiswitch short circuit
protection
·Cascade and Finite Models
• High insulation ·Low pass loss
• Lossless cascade output
·High insulation
• 3 x 10 Series Multiswitch
·Separate tiny amplifier for each output
·Connective property
TECHNICAL SPECIFICATIONS
Frequency Range SAT 950-2150MHz
·Optical connection integration
Frequency Range TERR 47-870MHz ·TERR amplifier voltage cutout
Input SAT + TERR 9+1
Output SAT + TERR 3X10 ·SMPS Power supply
Gain SAT -6dB±2
Cascade Loss SAT -1dB±1
SAT-SAT Isolation >38dB
Gain TERR -2dB±1
SAT-TERR Isolation >50dB
Cascade Loss TERR -1dB
Max. Signal Output SAT 100dBµV
Operating Voltage 18V 3A
Total Drawn Current 370mA
Drawn Current with LNB 1210mA
LNB + 3xMultiswitch Drawn Current 1680mA
Operating Temperature -20...+50ºC
Dimensions 235x80x133mm

31
 PROFESSIONAL AMPLIFIER
TPM 17/33
4 Satellite Center Distributing Diagram

%100
Geri Dönüşüm

32
GROUP TAP
ACTIVE
TPT 10/4 TPT 14/4
(2 SAT 1 MDU 1 RF) (3 SAT 1 MDU 1 RF)

TPT 17/4 TPT 17/4 RACKTYPE

(4 SAT 1 RF) (4 SAT 1 RF)

TECHNICAL TPT 10X4 TPT 14X4 TPT 17X4 Main Features

SPECIFICATIONS
Frequency Range SAT 950-2150Mhz 950-2150Mhz 950-2150Mhz • High output level
Frequency Range TERR 47-870Mhz 47-870Mhz 47-870Mhz
• Short circuit protection
Input SAT + TERR 9+1 13+1 16+1
Output SAT + TERR 10X4 14X4 17X4 • High insulation
Gain SAT +5dB±1 +5dB±1 +5dB±1 • High gain and power thanks to
Gain TERR -7dB±1 -7dB±1 -7dB±1 special design
SAT-SAT Isolation >31dB >31dB >31dB
• Voltage LED Indicators
SAT-TERR Isolation >50dB >50dB >50dB
Max. Signal Output SAT 100dBµV 100dBµV 100dBµV • Passive terrestrial polarity
Operating Voltage 18V 1,5A 18V 1,5A 18V 2A
• High insulated outputs
Total Drawn Current 130mA 160mA 200mA
Operating Temperature -20...+ 50C° -20...+ 50C° -20...+ 50C° • High insulated SMPS power
supply
Dİmensions 345x152x50mm 290x154x52mm 227x154x50mm
Weight 660gr 870gr 1100gr • Easy and compact

Geri Dönüşüm

33
 GROUP TAP OFF PASSIVE
TPT 5/10
(1 SAT 1 RF)

TPT 10/10 TPT 10/20

(2 SAT 1 MDU 1 RF) (2 SAT 1 MDU 1 RF)

TECHNICAL TPT 5/10 TPT 10/10 TPT 10/20 Main Features

SPECIFICATIONS
SAT 950 – 2150 MHz 950 – 2150 MHz 950 – 2150 MHz
• Passive Tap Off
TERR 47 – 870 MHz 47 – 870 MHz 47 – 870 MHz
• High isolation
SAT Gain -8-10dB -8-10dB -8-10dB
Isolation SAT/SAT >40dB >40dB >40dB • High gain and power thanks to special
design
TERR / SAT Isolation >40dB >40dB >40dB
SAT / TERR Isolation >40dB >40dB >40dB • Passive terrestrial polarity
Cascade Output Loss -2dB±1 -2dB±1 -2dB±1 • High insulated outputs
Operating Voltage - - - • Easy and compact installation
Total Drawn Current - - -
Dimensions 140x110x45 mm 224x102x45 mm 224x172x45 mm
Weight 275 gr. 400 gr. 650 gr.

34
GROUP SPLITTER
PASSIVE
TPS 5/10
(1 SAT 1 RF)

TPS 10/20 TPS 17/34

(2 SAT 1 MDU 1 RF) (4 SAT 1 RF)

TECHNICAL Main Features

SPECIFICATIONS TPS 5/10 TPS 10/20 TPS 17/34
SAT 950 – 2150 MHz 950 – 2150 MHz 950 – 2150 MHz ·Passive Splitter
TERR 47 – 870 MHz 47 – 870 MHz 47 – 870 MHz
Input SAT / TERR 4+1 9+1 16+1 ·High gain and power due to special design
Output SAT / TERR
Gain SAT
2x5
-4dB±1
2x10
-4dB±1
2x17
-4dB±1
·Passive terrestrial polarity
Gain TERR -4dB±1 -4dB±1 -4dB±1 ·Independent high-isolation outputs
SAT-SAT Isolation
SAT-TERR Isolation
>40
>40
>40
>40
>40
>40
·Easy and compact installation
Dimensions 140x110x48 mm 224x102x48mm 345x102x48mm
Weight 275 gr 400 gr 600gr

35
Geri Dönüşüm
 GRUP SPLITTER ACTIVE
Rack Type

TAS 4/32 (1 Satellite) 4 IF

4X32 IF OUTPUT
General Features
· Made for professional projects
·1 satellite distributor with 4 polarities in total for TAS 4/32
·Connecting the outputs to 8 - 16 - 24 - 32 separate multiswitches
independent of each other

·Gain adjustment thanks to 20dB Gain adjustment

·LNB voltage supply
·LNB short circuit protection
·LED warning system
·Extra sat filter and IF amplifier at polarity input
TAS 1/8 ·Independent highly isolated outputs
·High isolation SMPS power supply
·At low signals thanks to the large gain on its outputs ability to work
TAS 1/16 ·Easy and compact installation
·Low power usage thanks to new generation SMD components
TAS 1/24 ·Compatible with Digiturk systems
·950-2150 mhz sharp and amplified filter to each output
TAS 1/32
TECHNICIAL
SPECIFICATIONS TAS 4/32 TAS 1/8 TAS 1/16 TAS 1/24 TAS 1/32
Input 4 F Connector 1 F Connector 1 F Connector 1 F Connector 1 F Connector
Output 4x32 F Connector 8 F Connector 16 F Connector 24 F Connector 32 F Connector
Satellite Frequency Range 950-2150 Mhz 950-2150 Mhz 950-2150 Mhz 950-2150 Mhz 950-2150 Mhz
Satellite Subscriber Gain +13dB±1 +13dB±1 +13dB±1 +13dB±1 +13dB±1
gain adjustment 0...20dB 0...20dB 0...20dB 0...20dB 0...20dB
Max. Satellite Signal Input 90dBµV ±5 90dB ±5 90dBµV ±5 90dBµV ±5 90dBµV ±5
Insulation >30dB >30dB >30dB >30dB >30dB
Power source 18V 2,5A 18V 2,5A 18V 2,5A 18V 2,5A 18V 2,5A
Operating temperature -15...+40Cº -15...+40Cº -15...+40Cº -15...+40Cº -15...+40Cº
Dimensions 490x90x60 mm 490x90x60 mm 490x90x60 mm 490x90x60 mm 490x90x60 mm
Weight 3100 gr 900 gr 950 gr 1000 gr 1000 gr

36 %100
Geri Dönüşüm
 F I B E R O P T I C SYSTEMS
ONE CORE MULTI CORE

OPTICTRANSMITTER
OPTICRECEIVER
OPTICMULTISWITCH

37
%100
Geri Dönüşüm
 FIBER OPTIC MULTISWITCH
RACK TYPE OPTIC MULTISWITCH
Fiber LNB Led Subscriber Led
Optic Output Control Control

Cascade Sat Power

Output Input Input

38
 FIBER OPTIC MULTISWITCH
RACK TYPE OPTIC MULTISWITCH

39
 FİBER OPTİK TRANSMITTER
ONE CORE SERIES
Auto Fan Network Input Optic Output

TPF 410-4/8
NETWORK(4 SatAGC
+ 1 RF)

Modular Structure

TECHNICIAL
General Features SPECIFICATIONS
Input 17 F Connector +1 SC/APC Optic Connector
• AGC (automatic gain control)
Output 1 SC/APC (Full Band) Optic Connector
• Min. 65db max. 90 db input level Satellite Frequency Range 950-2150 Mhz
• Split up to 32 Satellite Gain 26dB±1
• 1 GHz internet distribution Maximum Optical Output Power 4mW / 8 mW
• 1270-1610 operating range AGC Level 25 dB
Satellite Input Level 65db ....95 dBµV
• Modular plug-in system
Optical Wavelength Range 1270-1610 nm
• Max. isolation due to independent
Isolation Sat - Sat >35dB
modules Power suplyy 220v 50Hz
• LED display for each LNB polarity Operating temperature -15...+40Cº
• Short-circuit protection for each LNB Dimensions 485x270x220mm
input Weight 7560 gr

42
FIBER OPTIC TRANSMITTER
ONE CORE SERIES
TPF 410-4/8
4 Satellite Fiber Optic Central Distribution Diagram

%100
43
Geri Dönüşüm
 TPF 41-4/8 AGC
(4 Sat 1 RF) Automatic Gain control
FIBER OPTIC TRANSMITTER
ONE CORE SERIES

Voltage Indicators LCD Display Setting Buttons

Inputs Optic Output Fan Power Input

TECHNICIAL
General Features SPECIFICATIONS
Input 17 F Connector (16 IF+1RF) (75Ω)
· 4 satellites (16 polarity Quad Quattro
Output 1 SC/APC (Full Bant) Optic Connector
C-band MDU LNB support) SAT Frequency Range 950-2150 MHz
· RF is transported over a single fiber optic TERR Frequency Range 47-870 MHz
cable SAT Gain 23dB ± 2
· Up to 64 splittable TERR Gain (DVB-C/DVB-T) 15dB ± 1
Gain Settings 0..15dB
· Front panel gain adjustment for each
Optical Output Power 4 mW (6dBm)
input
Optical Wavelength 1270…1570nm (CWDM)
· Voltage LED Indicators 90 dBµV ±3
Max. TERR Signal Input
· LNB voltage short circuit protection Max. SAT Signal Input 80 dBµV ±3
· LNB voltage control with on-off switch Power Supply 100-240 VAC 50W
· Automatic fan cooling system Operating Temperature -15...+40Cº
Dimensions 480x285x90mm
Weight 4300 gr

44 %100
Geri Dönüşüm
 FIBER OPTIC TRANSMITTER
ONE CORE SERIES
TPF 30-4/8 MDU AGC

TPF 21-4 /8 AGC

TPF 11-4 /8 AGC

TECHNICIAL
SPECIFICATIONS TPF 30-4/8 MDU AGC TPF 21-4 /8 AGC TPF 11-4 /8 AGC
Input 10 F Connector (16 IF+1RF) (75Ω) 9 F Connector (8 IF+1RF) (75Ω) 5 F Connector (4 IF+1RF) (75Ω)
Output 1 SC/APC (Full Bant) Optic Connector 1 SC/APC (Full Bant) Optic Connector 1 SC/APC (Full Bant) Optic Connector
SAT Frequency Range 950-2150 MHz 950-2150 MHz 950-2150 MHz
TERR Frequency Range 47-870 MHz 47-870 MHz 47-870 MHz
SAT Gain 23dB ± 2 23dB ± 2 23dB ± 2
TERR Gain (DVB-C/DVB-T) 15dB ± 1 15dB ± 1 15dB ± 1
Gain Settings 0..15dB 0..15dB 0..15dB
Optical Output Power 4 mW (6dBm) 4 mW / 8mW 4 mW / 8mW
Optical Wavelength 1270…1570nm (CWDM) 1270…1410nm (CWDM) 1270…1330nm (CWDM)
Max. TERR Signal Input 90 dBµV ±3 90 dBµV ±3 90 dBµV ±3
Max. SAT Signal Input 80 dBµV ±3 80 dBµV ±3 80 dBµV ±3
Power Supply 100-240 VAC 50W 100-240 VAC 50W 100-240 VAC 50W
Operating Temperature -15...+40Cº -15...+40Cº -15...+40Cº
Dimensions 480x285x90mm 480x285x90mm 480x285x90mm
Weight 3300 gr 3100 gr 2700 gr

%100
45
Geri Dönüşüm
 FIBER OPTIC TRANSMITTER
ONE CORE SERIES
TPF 41-4/8 AGC
4 Satellite Fiber Optic Center
Distribution Diagram

46
 FIBER OPTIC RECEIVER
ONE CORE SERİES
TFR 41
(4 SAT 1 RF)

Voltage Indicators Optic Input

Attenuator Setting

In large and long-distance projects

the fiber optic solves the light signal and converts it to a coaxial signal. With voltage led indicators, we can check if the system is working. With the external terr, additional broadcast
broadcast headend broadcast QAM broadcasts can be entered from the building.

TECHNICAL
Main Features SPECIFICATIONS
• Fiber optic receiver system over a single fiber optic core Connector 1 SC / APC (Full Band) Optical Connector
SAT Frequency Range 950-2150 Mhz
• Gain adjustment for each input
Terr Frequency Range 47-870 Mhz
• High isolation compact plug in feed and run
SAT Gain 26dB±1
• Voltage LED Indicators Terr Gain 33dB±2
• External Terr input Attenuator Range 0...20dB
• Operating up to -18 dB Maximum Optical Input Power 2mW
• High isolation special power supply in supply Optical Wavelength 1270...1570nm (CWDM)
Isolation SAT-SAT >35dB
• SC / APC connector system
Isolation SAT-TERR >40dB
• Stylish look with new casing ear design
Power Supply 12V-5V 3000mA / 18W
Operating temperature -25...+50Cº
Dimensions 360x65x180 mm
Weight 1670 gr

%100
Geri Dönüşüm

47
 FIBEROPTIC
FIBER OPTICRECEIVER
RECEIVER
ONECORE
ONE CORESERİES
SERIES
TFR 31 MDU - TFR 21 TFR 41
(4 SAT 1 RF)
(2 Sat 1 MDU 1 RF) (2 Sat 1 RF)

Voltage Indicators

Voltage Indicators Optic Input

Gain Adjustment Attenuator Setting

Optical Input

In large and long-distance projects

the fiber optic solves the light signal and converts it to a coaxial signal. With voltage led indicators, we can check if the system is working. With the external terr, additional broadcast
broadcast headend broadcast QAM broadcasts can be entered from the building.

TECHNICIAL TECHNICAL
Main Features
General Features SPECIFICATIONS
SPECIFICATIONS TFR 31 MDU TFR 21
• Fiber optic receiver system over a single fiber optic core Connector 1 SC / APC (Full Band) Optical Connector
• Fiber optic receiver system over a single Input 1 SC/APC (Full Band) Optic 1 SC/APC (Full Band) Optic Connector
SAT Frequency Range 950-2150 Mhz
•fiberGain adjustment
optic corefor each input Output 10 F Connector (9 IF+1RF)(75ohm) 9 F Connectors (8 IF+1RF)(75ohm)
Terr Frequency Range 47-870 Mhz
•• Gain
High adjustment
isolation compact for
plug ineach
feed and run
input SAT Frequency RangeSAT Gain 950-2150 Mhz 47-870MHZ
26dB±1
• High isolation compact plug in feed and TERR Frequency Range
• Voltage LED Indicators Terr Gain 47-870 Mhz 33dB±2 950-2150MHZ
run SAT Gain 26dB±1 26 dB ± 1
• External Terr input Attenuator Range 0...20dB
• Voltage LED Indicators
•• External
Operating Terr
up to -18 dB TERR Gain 33dB±2
Maximum Optical Input Power 2mW 33 dB ± 1
input
Gain Settings 0...20dB
Optical Wavelength 0...20dB
1270...1570nm (CWDM)
•• Operating
High isolationup
special
topower
-18 supply
dB in supply
Optical Input Power Isolation SAT-SAT
2mW >35dB 1270...1410nm (CWDM)
•• High isolation
SC / APC connectorspecial
system power supply in
supply Optical Wavelength Isolation SAT-TERR
1270...1430nm (CWDM)>40dB 2 mW
• Stylish look with new casing ear design
• SC / APC connector system Insulation Sat-Sat Power Supply>35dB 12V-5V 3000mA >35dB
/ 18W
• Stylish look with new casing ear design Insulation Sat-Terr Operating temperature
>40dB -25...+50Cº >40dB
Power Supply Dimensions 12V-2,3A 360x65x180 mm12V-2,3A
Operating TemperatureWeight -15...+40Cº 1670 gr -15...+40Cº
Dimensions 130x70x190 mm 270x235x45 mm
Weight 1238,8 gr 700 gr.

%100
Geri Dönüşüm

48 %100
Geri Dönüşüm
FIBER OPTIC RECEIVER
ONE CORE SERIES

TFR 41
4 Sat Fiber Optic Center
Distribution Diagram

%100
49
Geri Dönüşüm
 FIBER OPTIC TRANSMITTER
ONE CORE SERIES

TFT 504 TFT 404

(1 Sat 1 RF) (1 Sat)

TECHNICIAL
SPECIFICATIONS TFT 504 TFT 404 General Features
Input
Output
5 F Connector (4 IF+1RF) (75Ω)
1 SC/APC (Full Bant) Optic Connector
4 F Connector (4 IF) (75Ω)
1 SC/APC (Full Bant) Optic Connector
·1 sat (4 polarity Quad C-band LNB support) and RF
SAT Frequency Range 950-2150 MHz carried over a single fiber Optic cable.
950-2150 MHz
TERR Frequency Range 47-870 MHz ·4mW divisible up to 32 - 8mW divisible up to 64
SAT Gain 23dB ± 2 23dB ± 2 ·Gain adjustment for input with 4 mW and 8 mW
TERR Gain 15dB ± 1 ·Voltage led indicator
Gain Settings 0..15dB 0..15dB
·Isolated linear DFB laser
Optical Input Power 4 mW / 8mW 4 mW / 8mW
·CWDM standard wave operating range
Optical Wavelength
Insulation Sat-Sat
1270…1330nm (CWDM)
90 dBµV ±3
1270…1330nm (CWDM)
·47-870 MHz (Digital Terr)
Insulation Sat-Terr 80 dBµV ±3 80 dBµV ±3 ·950-2150 MHz (SatIF) operating bandwidth
Power Supply 12V 2.5A 12V 2.5A
Operating Temperature -15...+40Cº -15...+40Cº
Dimensions 150x145x51mm 150x145x51mm
Weight 480 gr 470 gr

50 %100
Geri Dönüşüm
FIBER OPTIC RECEİVER
ONE CORE SERIES

TFR 105 TFR 104

(1 Sat 1 RF) (1 Sat)

TECHNICIAL
General Features SPECIFICATIONS TFR 105 TFR 104
Input 1 SC/APC (Full Bant) Optic Connector 1 SC/APC (Full Bant) Optic Connector
·1 sat (4 polarity Quad C-band LNB support) and RF carried over a Output 5 F Connector (4 IF+1RF) (75Ω) 4 F Connector (75Ω)
single fiber Optic cable. SAT Frequency Range 950-2150 MHz 950-2150 MHz

·Voltage led indicator TERR Frequency Range 47-870 MHz 47-870 MHz

·Isolated linear DFB laser SAT Gain 23dB ± 2 23dB ± 2

·CWDM standard wave operating range TERR Gain

Gain Settings
15dB ± 1
0..15dB
15dB ± 1
0..15dB
·47-870 MHz (Digital Terr) Max. Terr Signal Output 90 dBµV ±3 90 dBµV ±3
·950-2150 MHz (SatIF) operating bandwidth Max. Sat Signal Output 80 dBµV ±3 80 dBµV ±3
·Easy installation and application Power Supply 12V 2A 12V 2A
Operating Temperature -15...+40Cº -15...+40Cº
Dimensions 145x130x50mm 145x130x50mm
Weight 380 gr 370 gr

%100
Geri Dönüşüm
51
 FIBER OPTIC DIAGRAM
ONE CORE SERIES
TRANSMITTER and RECEIVER

52
FIBER OPTIC RECEIVER
ONE CORE RF + IF SERIES
TFR 11 C M TFR 44 M
NEW

TECHNICAL TFR 11 C M TFR 44 M Main Features

SPECIFICATIONS
Input 1 Optical SC / APC 4 Optical SC / APC ·Quad & Quattro LNB
Output 2 F connectors 4 F konnector • C Band and Q Band
TERR 47-870MHZ
• Different IF Signal Inputs per Polarity
SAT 950-2150MHZ 950-2150MHZ
• Low Failure Possibility
Alternator 20dB 20dB
Optical wavelength 1310nm 1310nm • Each Input Desired Polarity Broadcast Input Feature
Optical max input power 2mw 2mw • 20 dB Alternator Setting for Each Polarity
RF Output level max. 100dBµV • High performance
IF Output level max. 90dBµV 90dBµV • RF + IF Single Cor Optical Receiver
Operating temperature -40+85°C -40+85°C
• SC / APC optical connector
Operating voltage 18Vdc 2Amp 18Vdc 2Amp
• 47-2150 mhz full band
Dimensions 115x100x45 mm 115x100x45 mm
Weight 450 gr 528 gr • 20 dB adjusted local
• 1310 nm working wavelength

%100
Geri Dönüşüm
53
 FIBER OPTIC RECEIVER
ONE CORE RF + IF
SERIES
TFR 11 B X
IF RF RECEIVER TFR 11 C X

This product
The single optical input of the RF and IF signal is provided via one and two coaxial outputs.
Max optical input power should be 2mW (3dBm). Tfr11cx should be used if rf and ıf are required to be separated separately and tfr11bx should be used if it is desired to exit as a single
output.
Both devices have amplifier and agc. The gain adjustment can be done manually or automatically. Since the products are amplifier, it can be adjusted with multi-turn pot.
Main Features
TECHNICAL TFR 11 B X TFR 11 C X
SPECIFICATIONS
Input 1 Optical SC / APC 1 Optical SC / APC
·1 RF + 1 IF Receiver
Output 1 F Connector 2 F Connector ·1 RF + 1 IF 1 Optical Input SC / APC Amplifier
TERR
SAT
47-870MHZ
950-2150MHZ
47-870MHZ
950-2150MHZ
·Low Failure Possibility
Alternator 20dB 20dB ·Each Input Desired Polarity Broadcast Input Feature
Optical wavelength
Optical max input power
1310nm
2mw
1310nm
2mw
·High performance
RF Output level max. 100dBµV 100dBµV ·RF + IF Single Cor Optical Receiver
IF Output level max.
Operating temperature
90dBµV
-40+85°C
90dBµV
-40+85°C
·SC / APC optical connector
Operating voltage 18Vdc 2Amp 18Vdc 2Amp ·47-2150 mhz full band
Dimensions 195x130x40 mm 195x130x40 mm
Weight 600 gr 600 gr ·20 dB adjustable SAT and TERR
·1310 nm working wavelength

54
FIBER OPTICTRANSMITTER
ONE CORE RF + IF SERIES

TFT 11 A-2 TFT 11 A-5

IF RFTRANSMITTER IF RFTRANSMITTER

This product
This product carries the rf and uge signal with a single input via single input. This product
has two types, 2 mW and 5 mW. If the project is going to go one-on-one, the product with
TFT11A-2 is preferred. TFT11A-5 is used if the project will have 8 or more sections.
Note: The TFT11A-5 can only be divisible by digital broadcasting (QAM-DVB-C, DVB-T) up
to 128; the signal level must be high since the product is not available.

TECHNICAL TFT 11 A-2 TFT 11 A-5

SPECIFICATIONS Main Features
Input 1 F Connector 1 F Connector
Output 1 Optical SC / APC 1 Optical SC / APC ·RF + IF Transmitter
TERR 47-870MHZ 47-870MHZ
SAT 950-2150MHZ 950-2150MHZ ·RF + IF 1 Input 1 SC / APC Optical Output without Amplifier
Optical Wavelength 1310nm 1310nm ·Min 90 db maximum 110 db input level
Optical Output Power 2 mW 5 mW
RF Input level 100±5dB 100±5dB ·Voltage LED Indicators
IF Input level
Operating temperature
90±5 dB
-40+85°C
90±5 dB
-40+85°C
·SC / APC connector system
Operating voltage 18V 4A 18V 4A ·TFT 11A-2 one-to-one operation
LNB Supply Feature
Dimensions
Yok
195x130x40mm
Yok
195x130x40mm
·TFT 11A-5 maximum 8 split
Weight 600gr. 600gr. ·Operating range 1310 nm
·2-5mw () output power
·Optional manual agc option system
55
 FİBER OPTİKTRANSMITTER
TEK KOR RF + IF SERİSİ

TFT 11 B-2 TFT 11 B-5

IF RFTRANSMITTER IF RFTRANSMITTER

This Product
It carries the Rf and If signal with two separate inputs over a single column. The product has two
types, 2 mW and 5 mW.
If the project is going to go one-on-one, the product with TFT11B-2 is preferred.
TFT11B-5 product is used if the project will have 8 or more sections.
Note: The TFT11B-5 can only be divided up to 128 in digital broadcast (qam-dvb-c, dvb-t), and the
broadcast analog can be up to 8.
The signal level must be 70-80 dB since the product is with amplifier.
TECHNICAL TFT 11 B-2 TFT 11 B-5
SPECIFICATIONS
General Features Input 2 F Connector 2 F Connector
• RF + IF Transmitter Output 1 Optic SC/APC 1 Optic SC/APC
• RF + IF 1 Input 1 SC / APC Optical Output without Amplifier TERR 47-870MHZ 47-870MHZ
• Min 90 db maximum 110 db input level SAT 950-2150MHZ 950-2150MHZ
• Voltage LED Indicators Optical Wavelength 1310nm 1310nm
• SC / APC connector system Optical Output Power 2 mW 5 mW
RF Input level 100±5dB 100±5dB
• FT 11B-2 one-to-one operation
IF Input level 75±5 dB 75±5 dB
• TFT 11B-5 maximum 8 split Operating temperature -40+85°C -40+85°C
Operating voltage 18V 4A 18V 4A
• Operating range 1310 nm
LNB Supply Feature Var Var
• 2-5mw () output power Dimensions 195x130x40mm 195x130x40mm
Weight 600gr. 600gr.
• Optional manual agc option system

56
FIBER OPTICTRANSMITTER
ONE CORE RF + IF SERIES

TFT 11 AB
1 MDU 1 RF Fiber Optic Center
Distribution Diagram

57
 FIBER OPTIC MULTISWITCH
ONE CORE SERIES
TFM 41/10
(4 Sat 1 RF )

TECHNICIAL
SPECIFICATIONS General Features
Input 1 SC/APC (Full Band) Optic+ 1 Terr.Connector
Subscriber Outputs 10 F Connectors (75 ohm) •Optical fiber optic multiswitch system optical
Cascade Outputs 17 F Connectors (16IF+1RF) (75 ohm) fiber and multiswitch only one product
SAT Frequency Range 950-2150 Mhz •Gain adjustment for each input
Frequency range 47-870 MHz
•Voltage Led Indicators
Gain Adjustment 0-20dB
•High Insulation compact plug and play
Optical Wavelength 1270...1570nm (CWDM)
Maximum Optical Input Power 2 mW •High performance and special power supply
SAT-SAT Isolation > 35dB •External TERR Input
SAT-Terr Isolation > 40dB
Subscriber Output Isolation > 36dB
Power Supply 12V 2,3A
Operating temperature -15 ...+40Cº
Dimensions 330x140x45mm
Weight 980gr.

58 %100
Geri Dönüşüm
FIBER OPTIC MULTISWITCH
ONE CORE SERIES
TFM 41 / 10
4 Sat Fiber Optic Center
Distribution Diagram

59
 FIBER OPTIC MULTISWITCH
ONE CORE SERIES

TFM 31/10 MDU

(2 Sat 1 MDU 1 RF )

TECHNICIAL
SPECIFICATIONS
Input 1 SC/APC (Full Band) Optic+1 Terr. Connector
General Features
Subscriber Outputs 10 F Connectors (75 ohm) •Optical fiber optic multiswitch system optical
SAT Frequency Range 950-2150 Mhz fiber and multiswitch only one product
Frequency range 47-870 MHz
•Gain adjustment for each input
Gain Adjustment 0...20dB
•Voltage Led Indicators
Optical Wavelength 1270...1430nm (CWDM)
Maximum Optical Input Power •High Insulation compact plug and play
2 mW
SAT-SAT Isolation > 35dB •High performance and special power supply
SAT-Terr Isolation > 40dB •External TERR Input
Subscriber Output Isolation > 36dB
Power Supply 12V 2,3A
Operating temperature -15 ...+40Cº
Dimensions 225x140x60mm
Weight 770gr.

60 %100
Geri Dönüşüm
 FIBER OPTIC MULTISWITCH
ONE CORE SERIES

TFM
(2 Sat 1 RF )
21/10

TECHNICIAL
SPECIFICATIONS General Features
Input 1 SC/APC (Full Band) Optic+ 1Terr. Connector
9 F Connectors (75 ohm) •Optical fiber optic multiswitch system optical
Subscriber Outputs
SAT Frequency Range 950-2150 Mhz fiber and multiswitch only one product
Frequency range 47-870 MHz •Gain adjustment for each input
Gain Adjustment 0...20dB •Voltage Led Indicators
Optical Wavelength 1270...1410nm (CWDM) •High Insulation compact plug and play
Maximum Optical Input Power 2 mW
•High performance and special power supply
SAT-SAT Isolation > 35dB
•External TERR Input
SAT-Terr Isolation > 40dB
Subscriber Output Isolation > 36dB
Power Supply 12V 2,3A
Operating temperature -15 ...+40Cº
Dimensions 225x140x60mm
Weight 770gr.

%100
61
Geri Dönüşüm
 FIBER OPTIC MULTISWITCH
ONE CORE SERIES

TFM 11/10
(1 Sat 1 RF )

TECHNICIAL
SPECIFICATIONS General Features
Input 1 SC/APC (Full Band) Optic+1Terr. Connector
•Optical fiber optic multiswitch system optical
Subscriber Outputs 10 F Connectors (75 ohm)
Cascade Outputs 5 F Connectors (4IF+1RF) (75 ohm) fiber and multiswitch only one product

SAT Frequency Range 950-2150 Mhz •Gain adjustment for each input
Frequency range 47-870 MHz •Voltage Led Indicators
Gain Adjustment 0 ... 20dB •High Insulation compact plug and play
Optical Wavelength 1270...1330nm (CWDM)
•High performance and special power supply
Maximum Optical Input Power 2 mW
•External TERR Input
SAT-SAT Isolation > 35dB
SAT-Terr Isolation > 40dB
Subscriber Output Isolation > 36dB
Power Supply 12V-5V 3000mA / 18W
Operating temperature -15 ... + 40ºC
Dimensions 225x140x60mm
Weight 590gr.

62 %100
Geri Dönüşüm
 FIBER OPTIC ACCESSORIES

PATCH PANEL

TERMINATION BOXES PATCH

PATCHCORD PIGTAIL CABLE

SPLITTER

CONNECTOR

63
 PATCH PANEL
WALL TYPE

TPS 12 - P TECHNICAL
SPECIFICATIONS
Teknoline TPS 12 - Optic termination box 12 Port Output plastic case
Wall Type

TECHNICAL
SPECIFICATIONS TPS 04 - P
Teknoline TPS 04 - Optic termination box 4 Port Output plastic case
Wall Type

TPS 12 - M TECHNICAL SPECIFICATIONS

Teknoline TPS 12 - Optic termination box 12 Port Output Metal case
Wall Type

TECHNICAL
SPECIFICATIONS
Teknoline TPS 04 - Optic termination box 4 Port Output Metal case
TPS 04 - M
Wall Type

TPS 04

FIBER OPTIC
04 PATCH PANEL

64
19 INCH PATCH
PANEL

Professional 19-inch Patch Panel system and cable method provides practical
fiber termination to the user

Suitable for 1U 19 inch rack mounting, sliding-slide type, mounting connection, plates with depth adjustment, metal clip-
screw locking, center bolt for splice cassette connection.

Fiber optical can be used for termination

and splitting.

TPP 12 - SC TPP 24 - SC

TPP 36 - SC

Main Features
·12 DX SC PORT: 24 Fiber ·SC,SheetFC,Thickness: 1,2 mm

Termination Capacity ·are possible.

ST, E2000, LC, MU etc. all known types of connectors

·Width: 465 mm ·Fiber Optic Attachment With tape and fiber optic cable gland.
·Height: (1U, 2U, 3U)
·Depth: 238 mm

65
 SC/FC OPTIC CONNEKTOR

SC SINGLE CAP
ADAPTEER

SC SC DUBLEXS
SINGLEAD ADAPTEER

SC/APC FAST
SC 5/10 dB
CONNEKTOR
ATTENUATOR

SC / FC OPTIC
FC / FC OPTIC CONVERTOR
INTERCONNECT

66
PATCH CORD

FC FC-SM 9/125 DX SINGLE

TECHNICAL
SPECIFICATIONS
TEKNOLINE FC FC SM 9/125 DX
SINGLE PATCH CORD 1m - 2m - 3m

FC FC-SM 9/125 DX
TECHNICAL
SPECIFICATIONS
TEKNOLINE FC FC SM 9/125 DX
PATCH CORD 1m - 2m - 3m

SC FC-SMT
TECHNICAL
1
SPECIFICATIONS
TEKNOLINE SC FC SM 9/125 SX
SINGLE PATCH CORD 1m

SC FC-SMT 2
TECHNICAL
SPECIFICATIONS
TEKNOLINE SC FC SM 9/125 SX
SINGLE PATCH CORD 2m

SC FC - SMT 3
TECHNICAL
SPECIFICATIONS
TEKNOLINE SC FC SM 9/125 SX
SINGLE PATCH CORD 3m

67
 PATCH CORD

SC SC-SM 1
TECHNICAL
SPECIFICATIONS
Teknoline SC SC SM 9/125 DX
PATCH CORD 1m.

SC SC-SM 2
TECHNICAL
SPECIFICATIONS
Teknoline SC SC SM 9/125 DX
PATCH CORD 2m.

SC SC-SM 3
TECHNICAL
SPECIFICATIONS
TEKNOLINE SC FC SM 9/125 SX
SINGLE PATCH CORD 3m

FC SC
TECHNICAL
- P1
SPECIFICATIONS
TEKNOLINE FC SM 9/125
Pigtail 1m

SM 9/125
TECHNICAL
SPECIFICATIONS
TEKNOLINE FC/APC SM 9/125
Pigtail 1m

68
SPLITTER

TFS 1/64 SC
TECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 64 SC / APC
Loss 23 dB

TFS 1/32 SC
TTECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 32 SC / APC
Loss 19 dB

TFS 1/16 SC
TTECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 16 SC / APC
Loss 15 dB

TFS 1/8 SC
TECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 8 SC / APC

Loss 10 dB

TFS 1/4 SC
TTECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 4 SC / APC
Loss 7 dB

TFS 1/2 SC
TTECHNICIAL SPECIFICATIONS
Input 1 SC / APC
Output 2 SC / APC
Loss 4 dB

69
 SPLITTER

TFS 1/64 FC TFS 1/4 FC

TTECHNICIAL SPECIFICATIONS
TTECHNICIAL SPECIFICATIONS
Input 1 FC / UPC
Input 1 FC / UPC
Output 4 FC / UPC
Output 64 FC / UPC
Loss 7 dB
Loss 23 dB

TFS 1/32 FC TFS 1/2 FC

TTECHNICIAL SPECIFICATIONS TTECHNICIAL SPECIFICATIONS
Input 1 FC / UPC Input 1 FC / UPC
Output 32 FC / UPC Output 2 FC / UPC
Loss 19 dB Loss 4 dB

TFS 1/16 FC TFS 1/8 FC

TTECHNICIAL SPECIFICATIONS TTECHNICIAL SPECIFICATIONS
Input 1 FC / UPC Input 1 FC / UPC
Output 16 FC / UPC Output 8 FC / UPC
Loss 15 dB Loss 10 dB

TFS 1/64 SC – 2U
TECHNICAL SPECS.
Input 1 SC / APC
Output 64 SC / APC
Loss 23 dB

TFS 1/32 SC - 1U
TECHNICAL SPECS.
Input 1 SC / APC
Output 32 SC / APC
Loss 19 dB

TFS 1/16 SC - 1U
TECHNICAL SPECS.
Input 1 SC / APC
Output 16 SC / APC
Loss 15 dB

70
 H E A D E N D SYSTEMS
ANALOG HEADEND DIGITAL HEADEND

TRANSMODULATOR

DVB-T DVB-C

SAT TV SINGLE SIDE BAND

DEMODULATO MODULATOR
R QAM
RECEIVER
IP TV

RF
HDMI MODULATOR AMPLIFIER

71
%100
Geri Dönüşüm
 DIGITAL HEADEND
DVB-T/C MODULATOR
TQM 1001
1 Channel Encoder Modulator

To convert HDMI or CVBS signal inputs to DVB-T or DVB-C digital broadcast signal
It is the digital headend equipment used.

General Features
TECHNICAL - RF output DVB-T / C (software selectable)
SPECIFICATIONS - MER value > 40dB
Input 1 x HDMI + CVBS
- Very clean RF spectrum
TERR Frequency 118 - 900MHz DVB-T/C
Connector 75Ω - F, female - Compact size
RF Output 1 x RF output in adjacent channels - Via the device with LCD screen and keypad
Output Frequencies 36 - 950 MHz (1Hz step) possibility of adjustment
Output Level 85dBµV - 2 years warranty
Connector 75 Ω - F, female
Output Attenuator 0...-20dB
MER > 40dB
Output loop loss < 1dB
Power source ~108 / 240 VAC 50/60Hz 12V DC
Power consumption 5 V A max
Operating temperature 0°C / 40°C
Storage temperature -10°C / +70°C
Humidity Up to %90
Weight 420 gr

72
DIGITAL HEADEND
DVB-T/C QAM MODULATOR

TQM 8000 PLUS IPTV

DVB-T DVB-C

TECHNICAL
SPECIFICATIONS Main Features
Input 8 x DVB-S/S2/T/T2/C
• 8 x independent DVB-S/S2 inputs
SAT Frequency 950 - 2150MHz DVB-S/S2
TERR Frequency 118 - 900MHz DVB-T/T2/C • 4 x RF output DVB-T/C (software selectable)
Connector 75Ω - F, female • Gbit IP streaming (up to 64 x SPTS / 4 x MPTS)
RF Output 4 x RF output in adjacent channels
• “Pool” technology
Output Frequencies 36 - 950 MHz (1Hz step)
Output Level 90dBµV • MER value > 40dB

Connector 75 Ω - F, female • Very clean RF spectrum

Output Attenuator 0...-20dB • PCR re-stamping
MER > 40dB
• Very friendly user interface
Output loop loss < 1dB
Power source ~108 / 240 VAC 50/60Hz • Wall or rack mountable
Power consumption 55 V A max • Compact size
Operating temperature 0°C / 40°C
• 2 year warranty
Storage temperature -10°C / +70°C
Humidity Up to %90
Weight 1.7 Kg

Interface Program Menu

73
%100
Geri Dönüşüm
 DIGITAL HEADEND
DVB-C MODULATOR
TQM 1616
16 in 1 Mux Scrambling QAM Modulator

8x DVB-S/S2 signals inputs for DVB-T or DVB-C digital broadcast communication

is the digital headend used.

General Features
TECHNICAL
- 8 x independent multi-standard DVB-S/S2 inputs
SPECIFICATIONS
Input 16 x DVB-S/S2 - 4 x RF outputs DVB-T / C (software selectable)
SAT Frequency 950 - 2150MHz DVB-S/S2 - Gbit IP streaming (up to 64 x SPTS / 4 x MPTS)
TERR Frequency 118 - 900MHz DVB-C - “Pool” technology
Connector 75Ω - F, female
- MER value > 40dB
RF Output 16 x RF output in adjacent channels
- Very clean RF spectrum
Output Frequencies 36 - 950 MHz (1Hz step)
Output Level 90dBµV - User-friendly interface

Connector 75 Ω - F, female - Can be mounted in a rack cabinet

Output Attenuator 0...-20dB - Compact size
MER > 40dB - 2 years warranty
Output loop loss < 1dB
Power source ~108 / 240 VAC 50/60Hz
Power consumption 55 V A max
Operating temperature 0°C / 40°C
Storage temperature -10°C / +70°C
Humidity Up to %90
Weight 1.42 Kg

74
DIGITAL HEADEND
DVB-T/C QAM MODULATOR

TSR 4000 CI PLUS IPTV

DVB-T DVB-C

TECHNICAL
SPECIFICATIONS Main Features
Input 4 x DVB-S/S2/T/T2/C
• 4 x Independent DVB-S/S2 inputs
SAT Frequency 950 - 2150MHz DVB-S/S2
TERR Frequency 118 - 900MHz DVB-T/T2/C • 4 x CI CAM module slots
Connector 75Ω - F, female • 4 x RF output DVB-T/C (software selectable)
Cam Module Yes, supports 4 x universal CAM
• Gbit IP streaming (up to 64 x SPTS / 4 x MPTS)
RF Output 4 x RF output in adjacent channels
Output Frequencies 36 - 950 MHz (1Hz step) • “Pool” technology
Output Level 90dBµV • MER value > 40dB
Connector 75Ω - F, female
• Very clean RF spectrum
Output Attenuator 0...-20dB
• PCR re-stamping
MER > 40dB
Output loop loss < 1dB • Very friendly user interface
Power source ~108 ila 240 VAC 50/60Hz • Rack mountable
Power consumption 55 V A max
• Compacy size
Operating temperature 0°C - 40°C
Storage temperature -10°C +70°C • 2 year warranty
Humidity Up to %90
Weight 1.7 Kg

75
 DIGITAL HEADEND
DVB-T/C QAM MODULATOR
IPTV
THE 8200 HD
DVB-T DVB-C

TECHNICAL Main Features

SPECIFICATIONS
HDMI Input 8 x HDMI input • 8 x Independent HDMI inputs
Video encoding MPEG-4 AVC / H.264 • x RF output DVB-T/C (software selectable)
Profile High Profile 4.0 • Gbit IP streaming (up to 64 x SPTS / 4 x MPTS)
Input resolution 1920 x 1080 – up to 50/60 p&i • “Pool” technology
Output resolution 1920 x 1080 – up to 30p • MER value > 40dB
HDCP support Evet • Very clean RF spectrum
RF Output 4 x RF output in adjacent channels
• PCR re-stamping
Output Frequencies 36 - 950 MHz (1Hz steo)
• Very friendly user interface
Output Level 90dBµV
75Ω - F, female • Wall or rack mountable
Connector
Output Alternator 0...-20dB • Compact size
MER > 40dB • 2 year warranty
Output loop loss < 1dB
Power source ~108 ila 240 VAC 50/60Hz
Power consumption 55 V A max
Operating temperature 0°C ila 40°C
Storage temperature -10°C +70°C
Humidity Up to %90
Weight 5778 gr

Interface Program Menu

76
%100
Geri Dönüşüm
DIGITAL HEADEND - Full HD 1080P
DIGITAL DVB-T/C RECEIVER - 5000 Channel
- USB Multimedia
TQ 7000 HD
Digital DVB-T/C Receiver
- SPDIF Audio Output
- HDMI
- Optional Wi-Fi
- Smart Remote

General Features
TECHNICAL
SPECIFICATIONS - Fully compatible with DVB-T/C digital standard
HDMI Input 1 x HDMI input - Fully compatible with HEVC/H.264/MPEG-4/AVS
Video encoding MPEG-4 AVC / H.264 High Definition Digital TV
Output resolution - Fully compatible with MPEG-2 High Definition and
1920 x 1080 – Up to 30p
Standard Definition Output
Output Frequencies 36 - 950 MHz (1Hz step)
- Fully compatible with MPEG-1/2 Layer I/II/III
Connector 75∧ - Female Antenna Socket
- DVB-T/C Signal input
Power source > 108 / 240 VAC 50/60Hz 12V DC - On Screen Electronic Program Guide(EPG)
Power consumption 5 V A max - Supports Auto search and Manual search
Operating temperature 0°C / 40°C - Parental control for channels
Storage temperature -10°C / +70°C - Plug and Play installation with an easy to use Menu
Humidity Up to %90 System
Weight 431 gr - Supports 480p, 576p, 720p, 1080i/p Video Resolution
- Supports 4:3 and 16:9 Aspect Ratio
- DVB or EBU subtitle selected by the system based
on availability on the network
- Various channel editing function(Favorites, Move, Lock,
Delete)
- Software upgrade via USB2.0 interface
- USB 2.0 interface PVR and media player
- Record digital television program to an external USB
portable hard disk and playback via USB 2.0

77
 DIGITAL HEADEND
DVB-C QAM RECEIVER

TQ 9000 HD

TECHNICAL Main Features

SPECIFICATIONS
HDMI Input 8 x HDMI input • H.264 / MPEG4 / MPEG2 HD 1080p
Video encoding MPEG-4 AVC / H.264 • Automatic Software Update EPG (7-day Program Guide)
Profile Yüksek Profil 4.0
• Favorite Channel Lists
Input resolution 1920 x 1080 – Up to 50/60 p&i
• HDMI Hi Speed USB USB PVR MP3 / JPEG Player
Output resolution 1920 x 1080 – Up to 30p
• Digital S / PDIF Teletext Subtitle
HDCP support Yes
RF Output 4 x RF output in adjacent channels • TV / Radio Channels

Output Frequencies 36 - 950 MHz (1Hz step) • Game

Output Level 90dBµV • Sleep Timer
Connector 75∧ - F, female
Output Attenuator 0...-20dB
MER > 40dB
Output loop loss < 1dB
Power source ~108 / 240 VAC 50/60Hz
Power consumption 55 V A max
Operating temperature 0°C / 40°C
Storage temperature -10°C / +70°C
Humidity Up to %90
Weight 511 gr

78
%100
Geri Dönüşüm
DIGITAL HEADEND
RF AMPLIFIER

TA 822
(RF Amplifier)

Main Features
• This product is used to amplify the RF signal at
headend cabin outputs.

• With powerful HYBRID mosfet transistor

• Provides more powerful and quality output.

• It provides heat to the entire frame with its

aluminum heat sink coating.

• Built for professional projects.

• Independent output and sharp RF filter design

• Gain setting with 20dB attenuator

• Low power consumption thanks to new

generation smd parts

• High signal rate

• High insulated SMPS power supply

• Easy and compact installation

TECHNICAL
SPECIFICATIONS
Input 2 F Connector
Output 1 F Connector
TERR Frequency Range 47-870 Mhz
TERR Gain 32dB
Attenuator Range 0...20dB
Equalizer attenuator 0…15dB
TERR Maximum Output 115dB ±10
Isolation >40dB
Operating temperature -25...+50Cº
Geri Dönüşüm
Dimensions 200x140x750 mm
Weight 1400 gr
79
 DIGITAL HEADEND
AMPLIFIER

THA 32 Z THA 32 ZI
RF LINE AMPLIFIER RF IF LINE AMPLIFIER

TECHNICAL Main Features

SPECIFICATIONS
Input 2 F Connector • Built for professional projects.
Çıkış 1 F Connector • RF + IF 2 F connector input;
SAT Frequency Range 950-2150MHz • RF + IF 1 connector output
TERR Frequency Range 47-870MHz • Independent output and sharp RF filter design
SAT Subscriber Gain +30dB ± 1
• Gain setting with 20dB attenuator
TERR Subscriber Gain +30dB ± 2
• Low power consumption thanks to new generation smd parts
Attenuator Setting 0...20dB
• High signal rate
Equalizer Attenuator 0...15dB
Maximum Satellite Input 80dB ± 10 • Tilt adjustment for 0-15dB at low signal RF
Terr Maximum Input 70dB ± 10 • Extra SAT filter and IF amplifier at SAT polarity input
Isolation > 30dB • Extra RF filter and HYBRID amplifier in RF filter
Drawn Current 700mA • High insulated SMPS power supply
Power source 220V 50Hz
• Easy and compact installation
Operating temperature -25...+50°C
Dimensions 16,5 x 14,5 x 5
Weight 900 gr

80
 ANTENNAS

OFFSET

T90

OFFSET

MULTIFOKUS

%100
Geri Dönüşüm
 DISH ANTENNAS

LAMİNAS 120 P
Main Features

Laminas 120P

·125cm offset satellite

TECHNICAL
Effective Reflector Size 1190x1298 mm Focus distance 700 mm
Operating Frequency 10,7÷12,8 GHz Offset Angle 23,5 deg
Gain (for GHz frequency) 10.7 GHz 40,9 dBi Supply Clamp Diameter 40 mm
11,3 GHz 41,1 dBi Antenna Weight OFC-1200G/OFC-1200P Except mount 8,5/6,7 kg
12,6 GHz 42,1 dBi Az-El with mount 10,3/8,5 kg
3dB Beam Width (for GHz frequency) 10.7 GHz 1,6 deg Operating temperature -40 ÷ +50 oC
11,3 GHz 1,5 deg Wind Resistance Operational 80 km/h
12,6 GHz 1,4 deg Survival 200 km/h

LAMİNAS 120 G
Main Features
• Laminas 120G
• Offset 125cm Dish Antenna
• Anti-icing System
• Hardware - glass epoxy composite
• Stainless steel screw elements
• Standard Color Light gray (RAL7047)

• Package size 1 or 2 units in Cardboard Box: 1340x170x1240 mm

TECHNICAL SPECIFICATIONS
Effective Reflector Size 1190x1298 mm Focus distance 700 mm
Operating Frequency 10,7÷12,8 GHz Offset Angle 23,5 deg
Gain (for GHz frequency) 10.7 GHz 40,9 dBi Supply Clamp Diameter 40 mm
11,3 GHz 41,1 dBi Antenna Weight OFC-1200G/OFC-1200P Except mount 8,5/6,7 kg
12,6 GHz 42,1 dBi Az-El mount ile 10,3/8,5 kg
3dB Beam Width (for GHz frequency) 10.7 GHz 1,6 deg Operating temperature -40 ÷ +50 oC
11,3 GHz 1,5 deg Wind Resistance Operational 80 km/h
12,6 GHz 1,4 deg Survival 200 km/h

82
DISH ANTENNAS

120 CM DELİKLİ OFSET

TEKNİK
Type ÖZELLİKLER Offset Horizontal axis diameter 106 cm ( 108,2 )
Offset Angle 26 ° Vertical axis diameter 118,5 cm (120,6 )
Frequency Range 10.70 - 12.75 GHz LNB holder 40 mm ( 60 mm optional )
Antenna gain (Ku-Band) 42,3dB F/D 0.5
Material Zinc Phosphate Coated Sheet Working temperature -40° + 60°
Thickness 0,9 mm Optimal wind resistance 90 km/H
Paint Electrostatic polyester powder Maximum wind resistance 150 km/H
coating
Color Anthracite (RAL-7016)

MOUNT
Type Trs 120 Main Features
Material 1.20mm Galvanizli sac
Paint (Optional) Electrostatic polyester powder • 120 cm perforated offset dish antenna
coating
• Anthracite Color
Anthracite (RAL-7016)
Rotation Angle Ø 34-60
• Perforated Galvanized Offset Antenna
Elevation Angle 0° - 360°
18° - 80°

97 CM HOLED OFFSET
TECHNICAL SPECIFICATIONS

Type Offset Horizontal axis diameter 87 cm ( 108,2 )

Offset Angle 26.37 ° Vertical axis diameter 97 cm (120,6 )
Frequency range 10.70 - 12.75 GHz LNB holder 40 mm
Antenna gain (Ku-Band) 38,9 dB - 39,8 dB F/D 0.62
Malzeme Zinc Phosphate Coated Sheet Working temperature -40° + 60°
Thickness 0,9 mm Optimal wind resistance 90 km/H
Boya Elektrostatik polyester toz boya Maximum wind resistance 150 km/H
Color Antrasit (RAL-7016)

MOUNT Main Features

Type Trs 100
• 97 cm perforated offset dish antenna
Material Galvanizli sac
Paint (Optional) Electrostatic polyester powder • Anthracite Color
coating
• Perforated Galvanized Offset Antenna
Anthracite (RAL-7016)
Rotation Angle 0° - 360°
%100
Geri Dönüşüm
Elevation Angle 0° - 90°

83
 DISH ANTENNA
GIBERTINI OP 150 S

GIBERTINI OP 150 S
Main Features
Ofset 125cm Çanak Anten
GIBERTINI OP 150 S
Offset 125cm Dish Antenna
·Çanak Anten
Satellite

TECHNICAL
Frequency Range (GHz) -> 10.00 - 13.00 3dB Beam width 12GHz -> 1.07°
Outer Size (cm) 155.0 x 166.0 Offset Marking Angle 21.3°
Reflector Size (cm) 150.0 x 161.0 Supply lighting angle 70°
Luminous efficiency * (%) 70 Supply clamp (mm) 40/23
Gain 10.70 GHz (dB) -> 43.00 Height angle 20°-90°
Gain 11.70 GHz (dB) -> 43.70 Mast clamp (mm) 55-100
Gain 12.75 GHz (dB) -> 44.50 Alu reflector thickness (mm) 2.0
Cross polarization * axis (dBc) 28 Steel reflektor thickness (mm) Steel dish not available
First side lobe level (dBc) 25 Wind load @ 120 km / h (kg) [worst case] 250
Noise temp12GHz, 36 ° height (K) 31 Net weight Alu dish + mount (kg) 28.8
F / D radio 0.66

GIBERTINI OP 125 L

TECHNICAL SPECIFICATIONS
Frequency Range (GHz) -> 10.00 - 13.00 3dB Beam Width 12GHz -> 1.07°
Outer Size (cm) 125.0 x 125.0 Offset Marking Angle 21.3°
Reflector Size (cm) 150.0 x 161.0 Supply Lightning Angle 70°
Luminous Efficiency * (%) 70 Supply Clamp (mm) 40/23
Gain 10.70 GHz (dB) -> 43.00 Height Angle 20°-90°
Gain 11.70 GHz (dB) -> 43.70 Mast Clamp (mm) 55-100
Gain 12.75 GHz (dB) -> 44.50 Alu Reflector Thickness (mm) 2.0
Cross polarization * axis (dBc) 28 Çelik Reflektör Thickness (mm) Çelik çanak mevcut değil
First side lobe level (dBc) 25 Wind Load @ 120 km / s (kg) [worst case] 250
Noise temp12GHz, 36 ° Height (K) 31 Net weight Alu dish + mount (kg) 28.8
F / D radio 0.66

84
DISH ANTENNAS
80 CM OFFSET

TECHNICAL SPECIFICATIONS
Type Offset Horizontal axis diameter 71 cm
Offset Angle 25.60° Vertical axis diameter 79 cm
Frequency range 10.70 - 12.75 GHz LNB holder 40 mm
Antenna gain (Ku-Band) 37 dB - 38 dB F/D 0.62
Material Zinc Phosphate Coated Sheet Working temperature -40° + 60°
Thickness 0,9 mm Optimal wind resistance 90 km/H
Paint Electrostatic polyester powder Maximum wind resistance 150 km/H
coating
Color Anthracite (RAL-7035)

MOUNT
Type Trs 6080 Main Features
Material Galvanizli sac • ·80 CM Offset Dish Antenna
Paint (Optional)
coating
Electrostatic polyester powder • ·Satellite dish with Teknoline zinc phosphate coating
• Light Gray (RAL-7035)
Anthracite (RAL-7035)
Angle of rotation 0 ° - 360 ° • Polyester Powder Coating
Yükselme açısı 18° 70° • Aluminum lnb handle Galvanized mount

W 90
MULTIFOCUS
Main Features
•· ItLNBs.
can be monitored via a single antenna from 8 different
·
• Dish life is 50-70 years long due to SMC ready molding
· material used in the bowl
TECHNICAL SPECIFICATIONS • · Minimal effects of hot-cold differences from weather
Type Multi Antenna gain left 39,5 changes
Antenna size 90 cm Çalışma sıcaklığı 35-90 derece • Stainless / Unbreakable / Non-deteriorating
Material used rglass) LNB handles 22-40 mm • LNB bar with pivoting head LNB feet angles adjustment
Offset angle 22,5 Rotation axis 0-360 derece • More than 8000 TV and Radio channels
Operating frequency 3,5-4,75 Ghz / 10,7-12,7 Ghz Elevation angle 13-66 derece • Different color options
Antenna gain middle 41,5 dB Weight 12510 gr • Cable channel in antenna for aesthetic appearance
Antenna gain right 39,5 • Easy setup

85
 SATELLITE DISTRIBUTION

LNB

SPLITTER TAP OFF

COMBINER

TV-SAT SOCKET

CONNECTORS
AND HAND

DISEQC SWITCH

%100

Geri Dönüşüm

86
LNB

TL 110 SINGLE
TECHNICAL
SPECIFICATIONS
Low noise level High quality protection
Compatibility with digital Dimensions 45x35x110 mm
broadcast
Low power consumption Weight 100 gr
Easy installation

TL 220 TWIN
TECHNICAL
SPECIFICATIONS
Low noise level High quality protection
Compatibility with digital Dimensions 100x40x130 mm
broadcast
Low power consumption Weight 200 gr
Easy installation

TL 330 QUATTRO
TECHNICAL
SPECIFICATIONS
Low noise level High quality protection
Compatibility with digital Dimensions 105x45x130 mm
broadcast
Low power consumption Weight 200 gr
Easy installation

TL 440 QUAD
TECHNICAL
SPECIFICATIONS
Universal Quad - 0,1 dB 4 Can be used independently with single LNB with receiver
Gold End Connector Output Compatible for Full HD broadcasts
Frequency: 10.7-12.75 GHz F connector rain protected
Lo:9.75 / 10.600 GHz Dimensions 100x45x130 mm
4 Universal LNB in single Weight 200 gr
sheath

87
 LNB

TL 880 OCTO
TECHNICAL
SPECIFICATIONS
Frequency 10.7-12.75 GHz
Noise Level 0.3 dB
Lo:9.75 / 10.600 GHz
Dimensions 135x50x140 mm
Weight 400 gr

8 universal LNB in one case

Single dish to 8 receiver distribution

MDU 5 DIGITURK
TECHNICAL
SPECIFICATIONS
Dimensions 105x45x135 mm
Weight 200 gr
P/N DPT-002-MDU5
RF 10.74 - 10.95 GHz , 11.45 - 11.70 GHz
LO1 12.6469 GHz
LO2 12.9765 GHz
LO3 12.5840 GHz
LO4 12.8943 GHz

Genel Özellikler
• Mdu 4 contains larger and more band spacing compared to lgb. TL 444 UNIVERSAL QUAD
• Mdu 5 Original digiturk lnb is used in central power plant systems.
• Digiturk and Digiturk are the original digiturk power plant LNB that you can use for
HD Plus easily.
• MPEG-4 broadcasts can also get smoothly. It is a product recommended by Digiturk
authorized services.
• One Cable Solution (One Touch) is a Single Polarized product and absolutely no
problem

• Universal LNB in single sheath

• 4 Can be used independently with single LNB with receiver
• Compatible for Full HD broadcasts
• Protected F connector rain

88
SPLITTER
5-1000 MHz
RF Splitter
TSF 08 WAY RF
TECHNICAL SPECIFICATIONS
5 - 1000 MHz
Dimensions 135x20x55 mm
Weight 98,2 gr

TSF 06 WAY RF
TECHNICAL SPECIFICATIONS
5 - 1000 MHz
Dimensions 135x20x55 mm
Weight 95,2 gr

TSF 04 WAY RF
TECHNICAL SPECIFICATIONS
5 - 1000 MHz
Dimensions 80x20x50 mm
Weight 52,6 gr

TSF 03 WAY RF
TECHNICAL SPECIFICATIONS
5 - 1000 MHz
Dimensions 75x15x45 mm
Weight 43,4 gr

TSF 02 WAY RF
TECHNICAL SPECIFICATIONS
5- 1000 MHz.
Dimensions 50x15x45 mm
Weight 31,2 gr

89
 SPLITTER
5-2400 MHz
RF IF Splitter
TSF 08 WAY IF
TECHNICAL SPECIFICATIONS
5-2400MHz signal divider for satellite signals
All inputs pass through DC.
100dB shielding against digital signals,
Strain attenuation 7.5dB in 1750 MHz
Return loss > 14dB
Weight 109 gr

TSF 06 WAY IF
TECHNICAL SPECIFICATIONS

5-2400MHz signal divider for satellite signals

All inputs pass through DC.
100dB shielding against digital signals,
Strain attenuation 7.5dB in 1750 MHz
Return loss > 14dB
Weight 109 gr

TSF 04 WAY IF
TECHNICAL SPECIFICATIONS
5-2400MHz signal divider for satellite signals, All inputs pass through DC.
100dB shielding against digital signals, Strain attenuation 7.5dB in 1750 MHz
Return loss > 14dB
Dimensions 75x15x45 mm
Weight 41,8 gr

TSF 03 WAY IF
TECHNICAL SPECIFICATIONS
5-2400MHz signal divider for satellite signals, All inputs pass through DC.
100dB shielding against digital signals, Strain attenuation 7.5dB in 1750 MHz
Return loss > 14dB
Dimensions 55x15x45 mm
Weight 31 gr

TSF 02 WAY IF
TECHNICAL SPECIFICATIONS
5-2400MHz signal divider for satellite signals, All inputs pass through DC.
100dB shielding against digital signals, Strain attenuation 7.5dB in 1750 MHz
Return loss > 14dB
Dimensions 55x15x45 mm
Weight 27,2 gr

90
TAP OFF
5-2400 Mhz
RF IF Tap Off
TECHNICAL
TF 1412
SPECIFICATIONS
TF1412 4 Way Tap 12dB
5-2400 MHz
Dimensions 70x15x50 mm
Weight 45 gr

TECHNICAL
SPECIFICATIONS
TF 1216 2 Way Tap 16dB
5-2400 MHz
Dimensions 55x15x45 mm
Weight 27,2 gr

TF 1212
TECHNICAL
SPECIFICATIONS
TF 1212 2 Way Tap 12dB
5-2400MHz
Dimensions 55x15x45 mm
Weight 27,2 gr

TF 1108
TECHNICAL
SPECIFICATIONS
TF-1108 1 Way Tap 8dB
5-2400 MHz
Dimensions 55x15x35 mm
Weight 26,6 gr

TT 1208 2 WAY
TECHNICAL
SPECIFICATIONS
TT-1208 2 Way Tap 8 dB
5-1000 MHz
Dimensions
184 55x35x45 mm %100
Geri Dönüşüm

Weight 27.2 gr

91
 TAP OFF
5-2400 Mhz / 5-1000 Mhz
RF IF Tap Off

TTP 08
TEKNİK ÖZELLİKLER
Uydu sinyalleri
All inputs pass için 5-2400MHz
through DC. sinyal bölücü
100dB shielding against digital signals,
Strain attenuation 7.5dB at 1750 MHz
Return loss > 14dB
Dimensions 55x15x35 mm

Ağırlık 42 gr

TTP 12
TECHNICAL
SPECIFICATIONS
1 Way Tap 12 dB
5-2400 MHz
Dimensions 55x15x40 mm
Weight 41,6 gr

TF 1212 2 WAY
TECHNICAL
SPECIFICATIONS
2 Way Tap 12 dB
Dimensions 55x15x50 mm
Weight 31 gr

TT 1116
TECHNICAL
1 WAY
SPECIFICATIONS
1 Way Tap 16 dB
Dimensions 55x15x40 mm
Weight 30 gr

TECHNICAL
TT 1106 1 WAY
SPECIFICATIONS
1 Way Tap 16 dB
Dimensions 55x15x40 mm
Weight 30 gr

92
TV-SAT PRİZ
TP 523 E
TEKNİK ÖZELLİKLER
Paslanmaz Zamak Gövde Yapısı
High Shielding Feature
Suitable for all bands
Minimum transmission loss
Easy to Install Design
Available Exempt Compliance
Working Band Range 5 - 2400 MHz
Dimensions 75x45x75 mm
Weig 150 gr

TP 2000
TECHNICAL SPECIFICATIONS
Stainless zinc die-cast chassis,
Suitable models for all bands,
High shielding feature,
Serial and star models suitable for all distributions,
Easy montage,
Mechanical structure preventing short circuit,
Mechanical infrastructure suitable for all standard covers,
Superior technical specifications,
Compliant with international standards
Working Band Range 5 - 2400 MHz
Dimensions 75x45x75 mm
Weight 150 gr

Stainless zinc die-cast chassis,

Suitable models for all bands,
High shielding feature,
Serial and star models suitable for all distributions,
Easy montage,
Mechanical structure preventing short circuit,
Mechanical infrastructure suitable for all standard covers,
Superior technical specifications,
Compliant with international standards
Working Band Range 5 - 2400 MHz

TP 3000
Dimensions 75x45x75 mm
Weight 150 gr

93
 UYDU SARF MALZEMELERİ
CABLE

F FASTENING APPARATUS CONNECTOR

SAT FINDER

94
CONNECTOR

RG 6 / 59
CLAMPABLE
FUsed
Konnektör
in Satellite and Cable TV Systems.
RG6 Suitable for use with thick cable.
Good Quality Gasketed F Type F Connector
Only fitted with Crimping Pliers.

RG 59
ROTATABLE
Mini Connector
Suitable for RG-59 mini and adjacent dual cable.
1. Quality Connector

RG 11 CLAMPABLE
F Connector
TECHNICAL SPECIFICATIONS
One-piece metal design
Superior shielding protection
Due to the special design, no excessive power is used during the installation.
Patented double clamping ring
The PCT increases the durability of the locking mechanism.

RG 11 ROTATABLE
F Connector
TECHNICAL SPECIFICATIONS
Iso Socket Female

95
 CONNECTOR

F INTERMEDIATE
F Connector
TECHNICAL SPECIFICATIONS
Used to Make Two Cable Attachments.

F QUICK
F Connector
TECHNICAL SPECIFICATIONS
Quick f connector with needle
It is attached to the lnb of your satellite receiver for easy operation.
It is practical because there is no screw
system.

QUICK QUICK
F Connector
TECHNICAL SPECIFICATIONS
Multiswitch two-way male crossover connection to cascade.
Imported product
High quality

RJ 45 TECHNICAL SPECIFICATIONS

Cat 6 Konnektör Suitable for shielded and unshielded cable

Compatible with Cat5 Cat5 and Cat6 cables

TEKNİK ÖZELLİKLER
Type of compression

96
OUR MONTAGE TEAM

DUR REFERENCE
Productian, design and applicatian is made using
%100 local and high technology

97
CERTIFICATES
 ®
TEl<NO>LINE
BİNA ELEKTRONİK SİSTEMLERİ
TEKNOLINE TECHNOLOGICAL SYSTEMS S.A.
Koza Mahallesi 1678 Sk. No:29 Esenyurt / İSTANBUL
Tel : +90 212 620 41 11
Fax: +90 212 620 43 33
e-mail: [email protected]

www.teknoline.net