Industry photo: should be
a the same image as larger
industry photo. Either a
different crop or different
angle.
Human photo. Can be
environmental/documentaty style
or portrait of engineer.
This image and the one above can
be of the same individual(s) with
industry photo. This image different angle or crop. This image
TE’S RAYCHEM SCREENED
and the one above should be will partially be obscured by orange
different versions of the same overlay.
photo or subject.
COUPLING CONNECTORS
RSTI-CC-58
800A up to 24 kV
ENERGY /// SCREENED COUPLING CONNECTORS RSTI-CC-58
Screened Coupling Connectors RSTI-CC-58
800A up to 24 kV
Product Features:
• The screened coupling connectors are
designed to mate with the rear end of the TE’s
Raychem RSTI-58 base screened connector
system designed up to 24 kV
• The insulation of the coupling
connectors are made of a highly
modified silicone rubber characterised by high
tracking resistance, elongation at break and
non-flammability
• A thin-walled screen is permanently bonded
onto the insulation and protects the
connection system against accidental contact
• The screened coupling connector need not be
removed for oversheath testing
• The combination of screened
connector and coupling connector exceeds
CENELEC HD 629.1 S2 requirements, which
include BS, VDE and other international
specifications
• The combination of screened
connector and coupling connector fits
630/1250A bushings type “C” as specified by
EN50180 and EN50181
• The compact design supports the use of
double “T” connections inside standard
terminal boxes
• The wide application range covers cable cross-
sections from
25 mm2 to 400 mm2
• Conductor connection with
mechanical or DIN lugs
• Easily accessible rear plug with capacitive test
point
• Few accessories required for
system test and earth connection
• Complete kit including lugs for
easier installation and storage
ENERGY /// SCREENED COUPLING CONNECTORS RSTI-CC-58
Screened Coupling Connectors RSTI-CC-58
800A up to 24 kV
Design and Construction:
1 6
1. Screened body 6. Threaded pin assembly
A thin-walled conductive outer screen is permanently A threaded pin assembly together with a washer,
bonded to the silicone rubber insulating material of the spring washer and hex nut ensure high-performance
body. electrical and mechanical contact with the previous
installed connector.
2. Inner screen
A conductive inner layer, as a Faraday cage around 7. Rear plug with test point
the compression or mechanical lug, prevents corona at Removable rear plug with capacitive test point.
rated voltage.
8. Test point
3. Compression or mechanical lugs The test point is used to determine whether the circuit
Specially designed DIN compression lugs, as well as is energized; alternatively it can be used for phasing.
tinned, mechanical lugs with shear bolts for connecting
either aluminium or copper conductor cables. 9. Conductive end cap
Electrical screen and protection of the rear end of the
4. Stress cone adapter separable connector.
Relieves electrical stress at the point where the cable
screen is cut. The insulated section, extending beyond
the wire shielding, provides a convenient point for
oversheath testing.
5. Earthing eye and ground lead
Provides a connection point for earthing the screen.
PAGE 3
Screened Coupling Connectors RSTI-CC-58
800A up to 24 kV
Applications
DOUBLE CONNECTION SINGLE CORE BRANCH OFF
Material required for 3 phases: Material required for 3 phases:
1 x RSTI-58xx (kits) 1 x RSTI-58xx (kits)
1 x RSTI-CC-58xx (coupling connector kit) 2 x RSTI-CC-58xx (coupling connector kit)
1 x RSTI-68TP (terminating plug kit)
285 405
63
299
260
101 101 101
Accessories
TEST ROD DISCONNECTABLE INLINE JOINT
Ref. no.: RSTI-68TR; Length: 310 mm Material required for 3 phases:
RSTI-68TRL; Length: 460 mm 1 x RSTI-58xx (kits)
RSTI-68TRA; Kit includes 1 x RSTI-CC-58xx (coupling connector kit)
2 short and 1 long testrod 1 x RSTI-68TP (terminating plug kit)
Note: All applications as shown in the
brochure need to have a mechanical
support, based on the requirements
for dynamic short circuit.
TERMINATING PLUG
Ref. no.: RSTI-68TP
EARTHING ADAPTER
INSULATING CAP Ref. no.: RSTI-68EA20;
Ref. no.: RSTI-68RC Ball diameter: 20 mm
One piece per set RSTI-68EA25;
Ball diameter: 25 mm
300
ENERGY /// SCREENED COUPLING CONNECTORS RSTI-CC-58
Screened Coupling Connectors RSTI-CC-58
800A up to 24 kV
TECHNICAL DATA FOR RSTI-CC-58
Cable insulation diameter range 12.7 mm - 34.6 mm
Connector cross-section range 25 mm2 - 400 mm2
Maximum system voltage 24 kV
Continuous current rating 800A
Basic impulse level 150 kV
Partial discharge at 2 U0 < 2 pC
AC voltage withstand, 1 min 57 kV
DC voltage withstand, 15 min 76 kV
Thermal short circuit, 1 s 54 kA
Dynamic short circuit 125 kA
The adapters meet the international CENELEC HD 629.1 S2 specification.
SELECTION TABLE
SCREENED SEPARABLE COUPLING CONNECTION SYSTEM WITH DIN COMPRESSION LUGS 12 kV
Cross Section Diameter Core Insulation (mm) Reference Number Conductor Material
(mm2)
min max AL CU
25 12.7 23.4 RSTI-CC-5810 RSTI-CC-5830
35 12.7 23.4 RSTI-CC-5811 RSTI-CC-5831
50 12.7 23.4 RSTI-CC-5812 RSTI-CC-5832
70 12.7 23.4 RSTI-CC-5813 RSTI-CC-5833
95 12.7 23.4 RSTI-CC-5814 RSTI-CC-5834
120 12.7 23.4 RSTI-CC-5815 RSTI-CC-5835
150 21.2 34.6 RSTI-CC-5826 RSTI-CC-5846
185 21.2 34.6 RSTI-CC-5827 RSTI-CC-5847
240 21.2 34.6 RSTI-CC-5828 RSTI-CC-5848
300 21.2 34.6 RSTI-CC-5829 RSTI-CC-5849
SCREENED SEPARABLE COUPLING CONNECTION SYSTEM WITH DIN COMPRESSION LUGS 24 kV
Cross Section Diameter Core Insulation (mm) Reference Number Conductor Material
(mm2)
min max AL CU
25 12.7 23.4 RSTI-CC-5810 RSTI-CC-5830
35 12.7 23.4 RSTI-CC-5811 RSTI-CC-5831
50 12.7 23.4 RSTI-CC-5812 RSTI-CC-5832
70 12.7 23.4 RSTI-CC-5813 RSTI-CC-5833
95 21.2 34.6 RSTI-CC-5824 RSTI-CC-5844
120 21.2 34.6 RSTI-CC-5825 RSTI-CC-5845
150 21.2 34.6 RSTI-CC-5826 RSTI-CC-5846
185 21.2 34.6 RSTI-CC-5827 RSTI-CC-5847
240 21.2 34.6 RSTI-CC-5828 RSTI-CC-5848
300 21.2 34.6 RSTI-CC-5829 RSTI-CC-5849
NOTE Kits including deep indent lugs are on request
PAGE 5
Screened Coupling Connectors RSTI-CC-58
800A up to 24 kV
SELECTION TABLE
SCREENED SEPARABLE COUPLING CONNECTION SYSTEM WITH MECHANICAL LUGS AND SHEAR BOLTS 12 kV
Reference Number Conductor
Cross Section Diameter Core Insulation (mm) Material
(mm2)
min max AL or CU
25 - 95 12.7 23.4 RSTI-CC-5851
95 - 120 12.7 23.4 RSTI-CC-5852
95 - 240 17.0 30.1 RSTI-CC-5853
150 - 240 21.2 34.6 RSTI-CC-5854
185 - 300 21.2 34.6 RSTI-CC-5855
240 - 400 21.2 34.6 RSTI-CC-5856
SCREENED SEPARABLE COUPLING CONNECTION SYSTEM WITH MECHANICAL LUGS AND SHEAR BOLTS 24 KV
Reference Number Conductor
Cross Section Diameter Core Insulation (mm) Material
(mm2)
min max AL or CU
25 - 70 12.7 23.4 RSTI-CC-5851
95 - 185 17.0 30.1 RSTI-CC-5853
95 - 240 21.2 34.6 RSTI-CC-5854
185 - 300 21.2 34.6 RSTI-CC-5855
FOR MORE INFORMATION:
TE Technical Support Centers
USA/Canada: +1 800-327-6996
Brazil: +55 11-2103-6023
Mexico: +52 55-1106-0800
te.com/energy South America: +57 1-319-8962
Benelux: +32 16-508-695
©2021 TE Connectivity Ltd. All Rights Reserved. EPP-1476-02/21
France: +33 (0) 38-058-3210
TE Connectivity, TE connectivity (logo), EVERY CONNECTION COUNTS, AMP, AMPACT, Bowthorpe EMP, Crompton Germany/Switzerland: +49 (0) 89-608-9903
Instruments, Raychem, SIMEL, UTILUX are trademarks. Other logos, product and Company names mentioned herein may be Italy: +39 335-834-3453
trademarks of their respective owners. While TE has made every easonable effort to ensure the accuracy of the information in
this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee Middle East/Africa: +971 4-211-7020
that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information Russia: +7 495-790-790-2-200
contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained Spain/Portugal: +34 912-681-885
herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change UK: +44 08708-707-500
without notice. Consult TE for the latest dimensions and design specifications. China: +86 400-820-6015
ENERGY /// SCREENED COUPLING CONNECTORS RSTI-CC-58
