0% found this document useful (0 votes)
456 views

GL50B Quick Start - R1.00

The document provides basic instructions for operating the GL50B device, including inserting a micro SIM card with the gold contact facing up, turning the device on by sliding the toggle switch left, and applying a black adhesive paper to cover holes and the card slot on the casing. The instructions are in 3 short sections and contain a total of 3 sentences.

Uploaded by

Gonzalo G.D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
456 views

GL50B Quick Start - R1.00

The document provides basic instructions for operating the GL50B device, including inserting a micro SIM card with the gold contact facing up, turning the device on by sliding the toggle switch left, and applying a black adhesive paper to cover holes and the card slot on the casing. The instructions are in 3 short sections and contain a total of 3 sentences.

Uploaded by

Gonzalo G.D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GL50B Quick Start 1.

00
Basic Operation

Check Parts List Check the Appearance

in k
l l
Install a SIM Card GL50B uses a micro SIM card. The SIM card Turn the Device On

c
should be inserted into the holder as shown

a
below with the gold-colored contact area

i
facing up, and pressed firmly until it snaps

e t
into place.

Note: Make sure the device has been

u n
turned off before
inserting or remov-
ing the SIM card.

Q fide
Slide the toggle switch to the left to turn on the device.

Note: If you need to switch on and off the device multiple times,
please switch the device on after it is kept switched off for more than

n
1 minute.
Apply Adhesive Paper If you replace the battery, please contact our technical support to
reset the battery percentage.

o
Apply the black adhesive
paper onto the casing as

C
shown below to cover
circular holes at the top
and card slot on the side
of the device.

Queclink
Grace Wang Checked
2019.03.20

You might also like