AD-25V Parts Manual

24 VAC Phase 5

American Dryer Corporation

88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com

020700JCARRITA/DX/tcosta ADC Part No. 450342

 Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY POUR VOTRE SÉCURITÉ

Do not store or use gasoline or Ne pas entreposer ni utiliser d’essence

other flammable vapors and ni d’autres vapeurs ou liquides
liquids in the vicinity of this or inflammables à proximité de cet
any other appliance. appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

Important
For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. AD-25V

__________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
 Table of Contents

OPL Control Door Assembly

For Models Mfd. as of July 1, 2002 .................................................................................................. 3
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002 .................................................................................................. 4
Control Door Assembly
For Models Mfd. prior to July 1, 2002 .............................................................................................. 5
Phase 5 Coin Microprocessor Control Panel Assembly ....................................................................... 6, 7
Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 8
Coin and OPL Control Box Assembly ..................................................................................................... 9
Coin Vault Assembly ............................................................................................................................. 10
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 1, 2000 ..................................................................................... 11
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000 ................................................................................. 12
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002 ........................................................................................ 13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002 .................................................................................... 14
Front Panel Assembly
For Models Mfd. with Steel Main Door as of July 1, 2002 .............................................................. 15
Front Panel Assembly
For Models Mfd. with Steel Main Door prior to July 1, 2002 .......................................................... 16
Front Panel Assembly
For Models Mfd. with Plastic Main Door ........................................................................................ 17
Main Door “Steel” Assembly ................................................................................................................ 18
Plastic Main Door Assembly ................................................................................................................. 19
Main Door Switch Assembly
For Models Mfd. with Steel Main Door .......................................................................................... 20
Main Door Switch
For Models Mfd. with Plastic Main Door ........................................................................................ 21
Basket (Tumbler)/Support Assemblies ................................................................................................... 22
Drop Lint Door Assembly
For Models Mfd. as of July 1, 2002 ................................................................................................ 23
Lint Trap Assembly
For Models Mfd. as of July 1, 2002 ................................................................................................ 24
Lint Drawer/Lint Drawer Switch Assembly
For Models Mfd. between July 25, 2000 and July 1, 2002 .............................................................. 25
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to July 25, 2000 .......................................................................................... 26
Idler Bearing Assembly ......................................................................................................................... 27
Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29
Non-Reversing Motor Mount Assembly .......................................................................................... 30, 31
Reversing Motor Mount Assembly .................................................................................................. 32, 33
Sensor Bracket Assemblies
For Models Mfd. as of July 1, 2002 .......................................................................................... 34, 35
Sensor Bracket Assemblies
For Models Mfd. prior to July 1, 2002 ...................................................................................... 36, 37
Gas Burner Assembly
For Models Mfd. as of September 29, 2000 ............................................................................. 38, 39
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to September 29, 2000 ......................................................................... 40, 41
Electric Oven Assembly .................................................................................................................. 42, 43
Sail Switch/Hi-Limit Assemblies ............................................................................................................ 44
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 45
3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 46
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ....................................................... 47
Reversing Electric Relay Panel Assembly ............................................................................................... 48
460-480 VAC Reversing Electric Relay Panel Assembly ........................................................................ 49
Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 50, 51
Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 52, 53
Outer Top/Back Guard Assemblies ....................................................................................................... 54
Microprocessor Coin Acceptors Listing ................................................................................................ 55
Coin Meter Replacement Parts ............................................................................................................. 56
Electrical Oven Component Application Chart ....................................................................................... 57
Additional Parts Available ..................................................................................................................... 58
OPL Control Door Assembly 3
For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 881053 1 ADC Logo with Tape

870011 1 Double Sided Tape Kit
2 883550 1 White Control Door Assembly
(includes illus. nos. 2 and 3)
883551 1 Ivory Control Door Assembly
(includes illus. nos. 2 and 3)
883552 1 Coral Blue Control Door Assembly
(includes illus. nos. 2 and 3)
3 117604 3 Sponge Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX + BTN Type 1
5 102603 1 Control Door Rod Support Catch
6 102601 1 Control Door Rod Retainer Clip
7 102502 1 Control Door Support Rod
8 150321 2 #10-32 x 1/2” Phillips Machine Screw
9 154011 2 #10-32 Multi-Thread U-Nut

Telephone: (508) 678-9000 Fax: (508) 678-9447

4 Coin Control Door Assembly
For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 160015 1 High Security Lock Assembly

160104 1 Key ONLY
2 160016 1 Lock Cam ONLY
3 881053 1 ADC Logo with Tape
4 883477 1 White Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
883478 1 Ivory Control Door with Black Trim
(includes illus. nos. 4 through 7)
883549 1 Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
5 883476 1 Black Trim Strip with Lock Hole
6 117604 6 Sponge Tape (sold by the foot)
7 152014 4 1/4-20 with 3/4” Free Spin Wash Nut
8 150317 2 #10-16 x 3/4” TORX + BTN Type 1
9 102603 1 Control Door Rod Support Catch
10 102601 1 Control Door Rod Retainer Clip
11 102502 1 Control Door Support Rod

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Control Door Assembly 5
For Models Mfd. prior to July 1, 2002

Illus. No. Part No. Qty. Description

1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)
160017 1 Special Dummy Lock ONLY (for non-coin models Only)
160104 1 MK-100 Key ONLY
2 160052 1 Lock Cam ONLY
3 881053 1 ADC Logo with Tape
870011 1 Double Sided Tape Kit
4 882511 1 White Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
882513 1 Almond B Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
882512 1 Coral Blue Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
5 117603 3 Noise Suppressor Tape (sold by the foot)
6 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
7 102603 1 Control Door Rod Support Catch
8 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
9 102502 1 Control Door Support Rod
10 102601 1 Control Door Rod Retainer Clip

Telephone: (508) 678-9000 Fax: (508) 678-9447

6 Phase 5 Coin Microprocessor Control Panel Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Phase 5 Coin Microprocessor Control Panel Assembly 7

Illus. No. Part No. Qty. Description

1 112526 1 Coin Keyboard Label Assembly

2 883537 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. as of June 25, 2002)
883538 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. as of June 25, 2002)
883582 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. prior to June 25, 2002)
883581 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. prior to June 25, 2002)
883539 1 Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
883540 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
883580 1 Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
883579 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Controller ONLY
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 --------- 1 Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 55)
8 -------- 1 Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 55)
9 137023 1 Optic Switch Connector ONLY
10 137021 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool
11 136048 1 1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

Telephone: (508) 678-9000 Fax: (508) 678-9447

8 Phase 5 OPL Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112535 1 OPL English Keyboard Label Assembly

112276 1 OPL Stick-On Labels (English Only)...Not Illustrated
112275 1 3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
112277 1 3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
112278 1 5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
2 801255 1 Phase 5 Microprocessor Control Panel ONLY
801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel
Assembly Complete
(includes illus. nos. 1 through 5)
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel
Assembly Complete
(includes illus. nos. 1 through 5)
3 137222 1 Phase 5 OPL Non-Reversing Controller ONLY
137231 1 Phase 5 OPL Reversing Controller ONLY
824998 1 Phase 5 Battery Clip
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 136048 1 1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Coin and OPL Control Box Assembly 9

Illus. No. Part No. Qty. Description

1 132002 1 Transformer (for mechanical steam dampers 208 VAC and higher)
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 150301 2 #8 x 7/16” Phillips Pan Head TEK Screw
4 131931 1 Steam Valve Relay - 24 VAC (for mechanical steam damper models Only)
5 137035 1 Motor Capacitor (for mechanical steam damper models Only)
6 323583 1 Capacitor Bracket (for mechanical steam damper models Only)
7 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
8 122641 1 15-Pin Microprocessor Connector
9 122706 * Socket Terminal ONLY
-- 122801 1 Pin/Socket Extraction Tool

* As required.

Telephone: (508) 678-9000 Fax: (508) 678-9447

10 Coin Vault Assembly

Illus. No. Part No. Qty. Description

1 802112 1 Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 5)
802117 1 Microprocessor Coin Vault ONLY
802110 1 Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 5)
802115 1 Non-Microprocessor Coin Vault ONLY
2 160028 1 Cam for 1/4 Turn Lock ONLY
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 4)
5 152014 4 1/4-20 Free Spin Wash Nut
6 102502 1 Control Door Support Rod
7 102601 1 Control Door Rod Retainer Clip
8 102603 1 Control Door Rod Catch

* Specify key number when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer “Tap Touch” Controls 11
For Models Mfd. as of November 1, 2000

Illus. No. Part No. Qty. Description

1 824298 1 15 Minute Timer - 24 VAC

2 824299 1 60 Minute Timer - 24 VAC
3 824175 1 Red Pilot Light - 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 Relay SPST 24v
6 120730 1 30-Position Terminal Block
7 151000 6 #6-32 Pal Nut
8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 - Dual Timer Panel ONLY
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer

Telephone: (508) 678-9000 Fax: (508) 678-9447

12 Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC

2 122400 1 Rocker Heat Selector Switch
3 882596 1 Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
882600 1 Dual Timer Reversing Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
850456 1 Dual Timer Control Panel ONLY
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
11 131932 1 Dual Timer Relay - 24 VAC
12 151000 4 #6-32 Pal Nut
13 112050 1 Dual Timer Label ONLY
14 124103 2 Arrow Timer Knob
15 124025 1 60 Minute Timer - 24 VAC
16 124030 1 15 Minute Timer - 24 VAC
17 132198 1 Reversing Timer - 24 VAC
-- 882540 1 Panel Wiring (non-reversing panel)...Not Illustrated
-- 882573 1 Panel Wiring (reversing panel)...Not Illustrated

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Panel Assembly 13
For Models Mfd. as of January 25, 2002

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC

2 122400 1 Rocker Heat Selector Switch
3 824172 1 Coin Meter Control Panel Assembly Less Coin Meter
(includes illus. nos. 2 through 5, 7, and 8)
824109 1 Coin Meter Control Panel ONLY
4 131932 1 24 VAC Relay
154001 2 #10-24 Speed Nut (used on P/N: 131932, 24 VAC relay)
5 123225 1 Green Push-To-Start Button
6 125601 1 25¢ Coin Meter - 24 VAC (specify timing)
7 153010 2 #6 Star Washer
8 152016 2 #4-40 Hex Nut
9 120712 1 12-Position Terminal Block
10 150300 1 #10-16 x 1/2” Hex Washer TEK Screw
11 122602 1 9-Pin Connector
12 122700 7 Pin Terminal ONLY
-- 122801 1 Pin Extraction Tool

NOTE: For Coin Meter Replacement Parts refer to page 56.

Telephone: (508) 678-9000 Fax: (508) 678-9447

14 Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC

2 122400 1 Rocker Heat Selector Switch
3 824020 1 Coin Meter Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 6, and 8 through 12)
800054 1 Coin Meter Control Panel ONLY
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7* 125601 1 25¢ Coin Meter - 24 VAC (specify timing)
8 150303 2 #4 x 3/4” Pan Head “A” Screw
9 120712 1 12-Position Terminal Block
10 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
11 122602 1 9-Pin Connector ONLY
12 122700 9 Pin Terminal ONLY
-- 122801 1 Pin/Socket Extraction Tool

* Consult factory for coin meters not listed.

NOTE: For Coin Meter Replacement Parts refer to page 56.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Front Panel Assembly 15
For Models Mfd. with Steel Main Door as of July 1, 2002

Illus. No. Part No. Qty. Description

1 883567 1 White Front Panel Assembly

(includes illus. nos. 1, 3, and 5 through 6)
883568 1 Ivory Front Panel Assembly
(includes illus. nos. 1, 3, and 5 through 6)
883569 1 Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, and 5 through 6)
2 150313 11 #10-16 x 1/2” TORX + BTN Type 1
150318 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)
3 -------- 1 Main Door Hinge
(refer to Main Door “Steel” Assembly on page 18)
4 122002 1 Lint Drawer Switch
5 170330 1 Friction Door Latch
6 154215 2 5/32” Pop Rivet

Telephone: (508) 678-9000 Fax: (508) 678-9447

16 Front Panel Assembly
For Models Mfd. with Steel Main Door prior to July 1, 2002

Illus. No. Part No. Qty. Description

1 883137 1 White Front Panel Assembly

(includes illus. nos. 1, 5, and 6)
883138 1 Coral Blue Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
883139 1 Ivory Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
2 150313 11 #10-16 x 1/2” TORX + BTN Type 1
150318 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)
3 -------- 1 Main Door Hinge
(refer to Main Door “Steel” Assembly on page 18)
4 -------- 1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 25)
5 170330 1 Friction Door Latch
6 154215 2 5/32” Pop Rivet

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Front Panel Assembly 17
For Models Mfd. with Plastic Main Door

Illus. No. Part No. Qty. Description

1 882529 1 White Front Panel Assembly

(includes illus. nos. 1, 3, 5, and 6)
882530 1 Almond B Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
882531 1 Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
2 150309 11 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 121405 1 Rubber Grommet
4 -------- 1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assemblies on page 26)
5 170330 1 Friction Door Latch
6 154215 2 5/32” Pop Rivet

Telephone: (508) 678-9000 Fax: (508) 678-9447

18 Main Door “Steel” Assembly

Illus. No. Part No. Qty. Description

1 881150 1 Black Main Door Assembly Complete

(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170731 1 Black Gasket Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150125 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
170731 1 Black Glass Adhesive (10.3 oz. cartridge)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Plastic Main Door Assembly 19

Illus. No. Part No. Qty. Description

1 881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
2 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
4 152014 4 1/4-20 Free Spin Wash Nut
5 102349 1 Main Door Gasket
170730 1 Clear Gasket Adhesive (10.3 oz. cartridge)
6 102212 1 20-7/16” Door Glass with Four (4) Holes
170730 1 Clear Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2” Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (nylon) Spacer
9 150431 1 Main Door Latch Screw
(#10 x 7/16” dome hex head screw)

Telephone: (508) 678-9000 Fax: (508) 678-9447

20 Main Door Switch Assembly
For Models Mfd. with Steel Main Door

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw

2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Main Door Switch 21
For Models Mfd. with Plastic Main Door

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut

2 153008 2 #6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8” Standard Nylon Spacer
6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
7 153565 2 #6-32 x 1” Self-Clinching Stud
8 881246 1 Main Door Switch Housing
9 150201 2 #10-32 x 1/4” Phillips Pan Head Screw
10 121405 1 Rubber Grommet

Telephone: (508) 678-9000 Fax: (508) 678-9447

22 Basket (Tumbler)/Support Assemblies

Illus. No. Part No. Qty. Description

1* 800702 1 Galvanized Basket (tumbler) ONLY (without felt collar)

817085 1 Galvanized Basket (tumbler)/Support Assemblies Complete
(includes illus. nos. 1 through 10)
800731 1 Stainless Steel Basket (tumbler) ONLY (without felt collar)
800752 1 Stainless Steel Basket (tumbler)/Support Assemblies Complete
(includes illus. nos. 1 through 10)
2 150413 24 #10-16 x 1/2” TORX Crimptite
3 301305 4 Galvanized Basket (tumbler) Rib ONLY
301420 4 Stainless Steel Basket (tumbler) Rib ONLY
4 116002 1 Felt Collar ONLY
5 100901 4 5/16-18 x 20” Tie Rod
6 153001 4 5/16” Flat Washer
7 817084 1 Basket (tumbler) Support ONLY
8 152004 4 5/16-18 Hex Nut
9 153002 4 5/16” Lock Washer
10 153001 4 5/16” Flat Washer
-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)

* Felt collar is not included and must be ordered separately.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Drop Lint Door Assembly 23
For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 802277 1 Drop Lint Door (for OPL models)

(includes illus. nos. 1 through 3)
802265 1 Drop Lint Door (for coin models)
(includes illus. nos. 1, 2, and 4)
2 117604 5 Sponge Tape (sold by the foot)
3 170226 1 Slide Latch (for OPL models)
4 160001 1 Lint Door AD-100 Lock (for coin models)
160103 1 Key ONLY

Telephone: (508) 678-9000 Fax: (508) 678-9447

24 Lint Trap Assembly
For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 800401 1 Lint Trap Assembly Complete

(includes illus. nos. 1 and 3 through 5)
800443 1 Lint Trap ONLY
2 154200 6 5/32” Pop Rivet
3 150300 3 #10-16 x 1/2” Hex Washer TEK Screw
4 304100 1 Lint Screen Holder ONLY
5 800500 2 Lint Screen Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Lint Drawer/Lint Drawer Switch Assembly 25
For Models Mfd. between July 25, 2000 and July 1, 2002

Illus. No. Part No. Qty. Description

1 883140 1 White Lint Drawer Assembly

(includes illus. nos. 1 and 2)
883136 1 Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
883135 1 Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
2 117605 5 Gasket (sold by the foot)
3 122116 1 Lint Drawer Switch
4 122605 2 4-Pin Socket Connector ONLY
5 122701 4 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
6 818087 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 3 through 6)
304136 1 Lint Drawer Switch Box Cover ONLY
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 122700 4 Pin Terminal ONLY
9 122604 2 4-Pin Connector ONLY

Telephone: (508) 678-9000 Fax: (508) 678-9447

26 Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to July 25, 2000

Illus. No. Part No. Qty. Description

1 882616 1 White Lint Drawer Assembly

(includes illus. nos. 1 and 2)
882614 1 Almond B Lint Drawer Assembly
(includes illus. nos. 1 and 2)
882615 1 Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
2 117605 5 Noise Suppressor Tape (sold by the foot)
3 108223 1 Lint Screen Assembly
4 122116 1 Lint Drawer Switch
5 122605 2 4-Pin Socket Connector
6 122701 4 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
7 800478 1 Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
304136 1 Lint Drawer Switch Box ONLY
8 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 122700 4 Pin Terminal ONLY
10 122604 2 4-Pin Connector ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Idler Bearing Assembly 27

Illus. No. Part No. Qty. Description

1 100107 1 5L-670 V-Belt (basket [tumbler] to idler)

(for non-reversing models Only)
100108 1 5L-680 V-Belt (basket [tumbler] to idler)
(for reversing models Only)
2 101129 1 9” x 2-1/2” Compound Pulley
3 100103 1 4L-510 V-Belt (for non-reversing models Only)
100112 1 4L-610 V-Belt (idler to motor)
(for reversing models Only)
4 154301 2 5/16-18 x 1” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882576 1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 801009 1 Idler Square Washer
11 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt

Telephone: (508) 678-9000 Fax: (508) 678-9447

28 Basket (Tumbler) Bearing Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler) Bearing Assembly 29

Illus. No. Part No. Qty. Description

1 153002 3 5/16” Lock Washer

2 880213 1 1-1/4” Flange Bearing with Nylock Setscrew
3 153002 3 5/16” Lock Washer
4 152004 3 5/16-18 Hex Nut
5 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
6 153002 4 5/16” Lock Washer
7 153004 4 3/8” Flat Washer
8 801100 1 1” Bearing Box Assembly Complete
(includes illus. nos. 8 through 14)
801105 1 Bearing Box ONLY
9 150608 2 5/16-18 x 1-1/4” Allen Setscrew
10 152004 2 5/16-18 Hex Nut
11 150501 3 5/16-18 x 3/4” Hex Head Machine Bolt
12 880201 1 1” Flange Bearing with Nylock Setscrew
13 153002 3 5/16” Lock Washer
14 152004 3 5/16-18 Hex Nut
15 101100 1 18” Pulley ONLY
101118 1 18-3/4” Pulley (for reversing models Only)
101110 1 1” Taper Lock Hub (for reversing models Only)
16 154301 2 5/16-18 x 5/16” Setscrew
17 100713 1 1/4” x 1/4” x 7/8” Key
18 100107 1 5L-670 V-Belt (basket [tumbler] to idler)
(for non-reversing models Only)
100108 1 5L-680 V-Belt (basket [tumbler] to idler)
(for reversing models Only)

Telephone: (508) 678-9000 Fax: (508) 678-9447

30 Non-Reversing Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 100103 1 4L-510 V-Belt (motor to idler)

2 100701 1 3/16” x 3/16” x 1” Key
(for use on 3ø models Only)
3 101104 1 1/2” x 2” Motor Pulley
(for use on 1ø - 60 Hz motors Only)
101132 1 5/8” x 2” Motor Pulley
(for use on 3ø - 60 Hz motors Only)
101133 1 5/8” x 2-1/4” Motor Pulley
(for use on 100066 and 100007 - 50 Hz motors Only)
101131 1 1/2” x 2-1/4” Motor Pulley
(for use on 181049 motors Only)
4 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
5 153002 4 5/16” Lock Washer
6 153001 4 5/16” Flat Washer
7 100065 1 1/2 HP 100-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Plug-Type Motor
181049 1 1/2 HP 240v 1ø 50 Hz Plug-Type Motor
100066 1 1/2 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type
Motor
(for 50 Hz models mfd. prior to August 22, 2002)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Non-Reversing Motor Mount Assembly (continued) 31

Illus. No. Part No. Qty. Description

8 122701 8 Socket Terminal ONLY

122801 1 Pin/Socket Extraction Tool
9 137030 1 8-Pin Housing Connector
10 152004 4 5/16-18 Hex Nut
11 153002 4 5/16” Lock Washer
12 153001 4 5/16” Flat Washer
13 117604 4 Sponge Tape (sold by the foot)
14 154000 4 5/16-18 Tinnerman Nut
15 850017 1 1/2 HP Motor Mount ONLY (56Z frame)
817075 1 1/2 HP 115-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
817076 1 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
817080* 1 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
883271* 1 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
16 153050 2 1/2” S.A.E. Flat Washer
17 100604 1 12-1/2” Impellor with 1/2” Bore
18 100702 1 1/8” x 1/8” x 1-1/2” Key
19 153050 2 1/2” S.A.E. Flat Washer
20 152006 2 1/2-20 Left Hand Jam Nut
21 120200 1 3/8” 90º Connector
22* 100007 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)

* Specify voltage when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

32 Reversing Motor Mount Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Reversing Motor Mount Assembly 33

Illus. No. Part No. Qty. Description

1 100112 1 4L-610 V-Belt (motor to idler)

2 100701 1 3/16” x 3/16” x 1” Key
3 101132 1 5/8” x 2” Motor Pulley
(for 60 Hz models Only)
101133 1 5/8” x 2-1/4” Motor Pulley
(for 50 Hz models Only)
4 120200 1 3/8” x 90º Connector
5 181003 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame)
6 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
7 153002 4 5/16” Lock Washer
8 153001 4 5/16” Flat Washer
9 100007 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
10 120200 1 3/8” x 90º Connector
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 154000 8 5/16” Tinnerman Nut
15 152004 4 5/16” Hex Nut
16 153002 4 5/16” Lock Washer
17 153001 4 5/16” Flat Washer
18 850070 1 Reversing Motor Mount ONLY (56Z frame)
(includes illus. nos. 18 and 19)
803802* 1 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Complete
(for 60 Hz models Only)
(includes illus. nos. 2 through 14 and 18 through 24)
803803* 1 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Complete
(for 50 Hz models Only)
(includes illus. nos. 2 through 14 and 18 through 24)
19 117604 4 Sponge Tape (sold by the foot)
20 153050 2 1/2” S.A.E. Flat Washer
21 100702 1 1/8” x 1/8” x 1-1/2” Key
22 100604 1 12-1/2” Impellor with 1/2” Bore
23 153050 2 1/2” S.A.E. Flat Washer
24 152006 2 1/2-20 Left Hand Jam Nut

* Specify voltage when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

34 Sensor Bracket Assemblies
For Models Mfd. as of July 1, 2002

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Sensor Bracket Assemblies 35
For Models Mfd. as of July 1, 2002

Illus. No. Part No. Qty. Description

1 880251 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 and 5 through 8)
2 130301 1 225° Large Manual Reset Thermostat
3 153010 2 #6 Star Washer
4 152000 2 #6-32 Hex Nut
5 121028 2 Insulated Terminal ONLY
6 122701 4 Socket Terminal ONLY
7 122605 1 4-Pin Socket Connector ONLY
8 154007 2 1/4” Tinnerman Push On Fastener
9 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
10 801424 1 Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
305007 1 Universal Sensor Bracket ONLY
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin Terminal ONLY
13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
14 150005 5 #6-32 x 1/4” Phillips Round Head Machine Screw
15 130111 1 130° Large Thermostat
16 130100 1 150° Large Thermostat
17 130103 1 225° Large Manual Reset Thermostat
18 130101 1 180° Large Thermostat
19 153010 5 #6 Star Washer
20 152000 5 #6-32 Hex Nut
21 840065 1 Sensor Jumper
22 121028 8 Insulated Terminal ONLY
23 122701 4 Socket Terminal ONLY
24 122605 1 4-Pin Socket Connector ONLY
818007 1 Sensor Bracket Harness Assembly
(includes illus. nos. 21 through 24)
25 818321 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats
(includes illus. nos. 14 through 25)
305007 1 Universal Sensor Bracket ONLY
26 122604 1 4-Pin Connector ONLY
27 122700 4 Pin Terminal ONLY
122801 1 Pin/Socket Extraction Tool
28 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

36 Sensor Bracket Assemblies
For Models Mfd. prior to July 1, 2002

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Sensor Bracket Assemblies 37
For Models Mfd. prior to July 1, 2002
Illus. No. Part No. Qty. Description

1 882533 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 and 5 through 7)
2 130301 1 225º Manual Reset Thermostat
3 153010 2 #6 Star Washer
4 152000 2 #6-32 Hex Nut
5 121028 2 Insulated Terminal ONLY
6 122701 4 Socket Terminal ONLY
7 122605 1 4-Pin Socket Connector ONLY
8 154007 2 1/4” Tinnerman Push On Fastener
9 150005 2 #6-32 x 1/4” Round Head Machine Screw
10 817046 1 Microprocessor Sensor Bracket Assemblies Complete
(for models mfd. prior to May 2, 2000)
(includes illus. nos. 1 through 10)
818084 1 Microprocessor Sensor Bracket Assemblies Complete
(for models mfd. between May 2, 2000 and July 1, 2002)
(includes illus. nos. 1 through 10)
322062 1 Universal Sensor Bracket ONLY
(for models mfd. prior to May 2, 2000)
322080 1 Universal Sensor Bracket ONLY
(for models mfd. between May 2, 2000 and July 1, 2002)
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin Terminal ONLY
13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
14 150005 5 #6-32 x 1/4” Slotted Round Head Machine Screw
15 130111 1 130º Thermostat
16 130100 1 150º Thermostat
17 130301 1 225º Manual Reset Thermostat
18 130101 1 180º Thermostat
19 153010 5 #6 Star Washer
20 152000 5 #6-32 Hex Nut
21 882535 1 Sensor Jumper
22 121028 4 Insulated Terminal ONLY
23 122701 4 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
24 122605 1 4-Pin Socket Connector ONLY
882534 1 Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
25 818083 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats
(for models mfd. between May 2, 2000 and July 1, 2002)
(includes illus. nos. 14 through 25)
882536 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats
(for models mfd. prior to May 2, 2000)
(includes illus. nos. 14 through 25)
322062 1 Universal Sensor Bracket ONLY
(for models mfd. prior to July 1, 2002)
322080 1 Universal Sensor Bracket ONLY
(for models mfd. between May 2, 2000 and July 1, 2002)
26 122604 1 4-Pin Connector ONLY
27 122700 4 Pin Terminal ONLY
28 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

38 Gas Burner Assembly
For Models Mfd. as of September 29, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Gas Burner Assembly 39
For Models Mfd. as of September 29, 2000

Illus. No. Part No. Qty. Description

1 141104 2 Small Tube Burner

2 151001 2 #8-32 Pal Nut
3 150108 2 #8-32 x 1/2” Phillips Pan Head Machine Screw
4 140818* 2 #31 Orifice (natural gas)
140802* 2 #50 Orifice (liquid propane [L.P.] gas)
5 141230 1 1/2” Direct Spark Ignition (DSI) Manifold (2-port)
6 318714 1 1-Piece Gas Valve Bracket
7 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 128927 1 Natural Gas Valve
880960 1 Liquid Propane (L.P.) Gas Valve
9 809307 1 Ignitor-Probe Assembly
10 801048 1 Direct Spark Ignition (DSI) Module (three [3] tries)
11 817027 1 Direct Spark Ignition (DSI) Module Mounting Bracket
12 150300 9 #10-16 x 1/2” Hex Washer TEK Screw
13 152013 2 #6-32 Hex Nut
14 142707 1 1/2” x 1-1/2” Long Black Nipple
15 142506 1 1/2” Street Elbow
16 142600 1 1/2” Black Union
17 142800 1 1/2” x 18” Pipe
18 817058** 1 Direct Spark Ignition (DSI) Burner Box - Natural Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817059 1 Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817088 1 Direct Spark Ignition (DSI) Burner Box ONLY
882267 1 AD-25V L.P. Conversion Kit (includes orifices)
880604*** 1 Steam to Gas Interface Assembly

* Consult factory for elevations over 2,000 feet.

** Burner orifices are not included and must be ordered separately.
*** Needed when converting steam heat to gas heat.

Telephone: (508) 678-9000 Fax: (508) 678-9447

40 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to September 29, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Direct Spark Ignition (DSI) Burner Assembly 41
For Models Mfd. prior to September 29, 2000

Illus. No. Part No. Qty. Description

1 141104 2 Small Tube Burner

2 151001 2 #8-32 Pal Nut
3 150108 2 #8-32 x 1/2” Pan Head Machine Screw
4* 140818 2 #31 Burner Orifice (natural gas)
140802 2 #50 Burner Orifice (liquid propane [L.P.] gas)
5 141230 1 1/2” Direct Spark Ignition (DSI) Manifold (2-port)
6 318700 2 Pipe Bracket (bent)
7 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
8 128927 1 Natural Gas Valve
880960 1 1/2” Direct Spark Ignition (DSI) Gas Valve with Liquid Propane (L.P.) Kit
Combination
9 880134 1 Ignitor Probe Assembly
882537 1 Flame-Probe Wire
10 128935 1 Johnson Controls Direct Spark Ignition (DSI) Module with Three (3) Tries
11 817027 1 Direct Spark Ignition (DSI) Module Mounting Bracket Assembly
12 150309 3 #10-16 x 1/2” Hex Head TEK Crimptite Screw
13 152013 2 #6-32 Hex Nut
14 141313 1 90º x 1/2” x 1” Gas Shut Off Assembly
15 142800 1 1/2” x 18” Pipe
16 318712 1 Gas Valve Pipe Bracket
17 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
18 817058** 1 Direct Spark Ignition (DSI) Burner Box - Natural Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817059 1 Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817088 1 Direct Spark Ignition (DSI) Burner Box ONLY
--- 882267 1 AD-25V Liquid Propane (L.P.) Conversion Kit (includes orifices)
*** 882604 1 Steam to Gas Interface Assembly

* Consult factory for elevations over 2,000 feet.

** Burner orifices are not included and must be ordered separately.
*** Needed when converting steam heat to gas heat.

Telephone: (508) 678-9000 Fax: (508) 678-9447

42 Electric Oven Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Assembly 43

Illus. No. Part No. Qty. Description

1 803003* 1 Small Electric Oven Box ONLY

---------* 1 Electric Oven Assembly Complete
2 ---------* - Electric Element
3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
4 802800 1 Sail Switch Box with Bracket and Cover ONLY
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
5 154004 1 Twin Speed Nut
6 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 802799 1 Sail Switch Box Cover ONLY
8 122200 1 Sail Switch ONLY
9 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
10 105500 1 Sail Switch Actuator Rod
11 319202 1 Sail Switch Damper (flat)
12 154002 1 1/8” Push On Fastener
13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
14 803100 1 Electric Oven Front Cover ONLY
15 320611 1 Large Relay Box Cover ONLY
16 150301 3 #8-18 x 7/16 Phillips Pan Head TEK Screw
17 130400 1 290º Hi-Limit Thermostat
18 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
19 154001 1 #10-24 Speed Nut
20 121010 1 L-70 Ground Lug
21 152014 3 1/4-20 Free Spin Wash Nut
22 --------* 1 Oven Relay
23 --------* 1 Oven Relay Replacement Coil
24 120081 - Internal Ceramic Insulator (2 per element)
25 120080 - External Ceramic Insulator (2 per element)
26 152008 - #10-32 Hex Nut (4 per element)
27 121011* - Bus Bar
28 --------* - Oven Wire with Crimp Lug
29 153009 - #10 Star Washer (2 per element)
30 321300 1 Small Electric Oven Right Side Cover ONLY
31 150207 1 #10-24 x 1/2” Phillips Head Machine Screw
882604** 1 Steam to Electric Interface Assembly

* Refer to Electrical Oven Component Application Chart on page 57.

** Needed when converting steam heat to electric heat.

Telephone: (508) 678-9000 Fax: (508) 678-9447

44 Sail Switch/Hi-Limit Assemblies

Illus. No. Part No. Qty. Description

1 154004 1 Twin Speed Nut

2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 802799 1 Sail Switch Box Cover and Bracket ONLY
4 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
5 122200 1 Sail Switch ONLY
6 105500 1 Sail Switch Actuator Rod
7 319202 1 Sail Switch Damper (flat)
8 154002 1 1/8” Push On Fastener
9 802800 1 Sail Switch Box with Cover and Bracket ONLY
802801 1 Sail Switch Assembly Complete
(includes illus. nos. 1 through 9)
10 142800 1 1/2” x 18” Pipe
11 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
12 319704 1 Hi-Limit Mounting Bracket ONLY
13 151000 2 #6-32 Pal Nut
14 150001 2 #6-32 x 1/2” Round Head Machine Screw
15 130201 1 330º Hi-Limit Manual Reset Thermostat

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Single-Phase (1ø) Motor, Electric Relay Panel Assembly 45

Illus. No. Part No. Qty. Description

1 151000 2 #6-32 Pal Nut

2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw
4 120716 1 2-Position Terminal Block
5 322817 1 Rear Electric Mounting Plate ONLY
882662 1 Rear Electric Panel Assembly Complete - 120 Volt
(includes illus. nos. 1 through 14)
882663 1 Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam heated models Only)
(includes illus. nos. 1 through 14)
818395 1 Rear Electric Panel Assembly Complete - 208-240 Volt
(for electric heated models Only)
(includes illus. nos. 1 through 14)
6 882652 1 Transformer Assembly - 120 Volt
882653 1 Transformer Assembly - 208-240 Volt
(for gas and steam heated models Only)
818396 1 Transformer Assembly - 208-240 Volt (for electric heated models Only)
7 136008 1 or 2 Fuse Holder ONLY
8 136049 1 3/4-Amp (Slo-Blo) Fuse ONLY - 120 Volt
136057 2 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
9 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 150297 1 #10 x 1/2” Hex Washer TEK Screw (green)
11 152004 1 5/16-18 Hex Nut
12 121010 1 L-70 Ground Lug
13 153002 1 5/16” Lock Washer
14 132459 1 3-Pole Contactor
15 121300 3 Open/Closed Bushing

Telephone: (508) 678-9000 Fax: (508) 678-9447

46 3-Phase (3ø) Motor, Electric Relay Panel Assembly

Illus. No. Part No. Qty. Description

1 151000 2 #6-32 Pal Nut

2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw
4 120701 1 4-Position Terminal Block (for models mfd. with 3ø motors)
120716 1 2-Position Terminal Block (for models mfd. with 1ø motors)
5 322817 1 Rear Electric Mounting Plate ONLY
882664 1 Rear Electric Panel Assembly Complete - 208-240 Volt
For Gas and Steam Models ONLY
(includes illus. nos. 1 through 14)
818400 1 Rear Electric Panel Assembly - 208-240 Volt
For Electric Heated Models ONLY
(includes illus. nos. 1 through 14)
882665 1 Rear Electric Panel Assembly Complete - 380-416 Volt
For Gas and Steam Models ONLY
(includes illus. nos. 1 through 14)
818395 1 Rear Electric Panel Assembly Complete - 208-240 Volt
For Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
(includes illus. nos. 1 through 14)
882667 1 Rear Electric Panel Assembly Complete - 380-416 Volt
For Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
(includes illus. nos. 1 through 14)
6 882653 1 Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY
818396 1 Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY
882654 1 Transformer Assembly - 380-416 Volt
7 136008 2 Fuse Holder ONLY
8 136057 2 1/2-Amp (Slo-Blo) Fuse ONLY
9 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 150297 1 #10 x 1/2” Hex Washer TEK Screw (green)
11 152004 1 5/16-18 Hex Nut
12 121010 1 L-70 Ground Lug
13 153002 1 5/16” Lock Washer
14 132459 1 3-Pole Contactor
15 121300 3 Open/Closed Bushing

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

460-480 VAC 3-Phase (3Ø) Motor, Electric Relay Panel Assembly 47

Illus. No. Part No. Qty. Description

1 150009 2 #6-32 x 1-1/2” Phillips Pan Head Machine Screw

2 120701 1 4-Position Terminal Block
3 830208 1 Transformer Assembly (460 VAC) for Micro Models ONLY
824161 1 Transformer Assembly (460 VAC) for Non-Micro Models ONLY
4 135501 1 1-Amp Double-Pole Circuit Breaker (460 VAC Only)
5 120768 2 35 x 15mm Din Rail
6 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
7 150297 2 #10 x 1/2” Ground Screw
8 152004 1 5/16-18 Hex Nut
9 121010 1 L-70 Ground Lug
10 153002 1 5/16” Lock Washer
11 132459 1 24 VAC 3-Pole Contactor
12 322817 1 Mounting Plate ONLY
883332 1 Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY
(includes illus. nos. 1 through 14)
830262 1 Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY
(includes illus. nos. 1 through 14)
13 151000 2 #6-32 Pal Nut
14 120765 4 End Stop
15 121300 1 Open/Closed Bushing
16 141403 1 Control Voltage Transformer (24V) for Micro Models ONLY

Telephone: (508) 678-9000 Fax: (508) 678-9447

48 Reversing Electric Relay Panel Assembly

Illus. No. Part No. Qty. Description

1 150300 2 #10-16 x 1/2” Hex Washer TEK Screw

2 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw
3 120701 1 4-Position Terminal Block
4 132458 1 3-Pole Reversing Contactor
5 882653 1 Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY
825428 1 Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY
882654 1 Transformer Assembly - 380-416 Volt
6 136008 1 Fuse Holder ONLY
7 136057 1 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
8 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 150297 1 #10 x 1/2” Hex Washer TEK Screw (green)
10 152004 1 5/16-18 Hex Nut
11 121010 1 L-70 Ground Lug
12 153002 1 5/16” Lock Washer
13 132459 1 3-Pole Contactor
14 322812 1 Rear Electric Mounting Plate ONLY
882673 1 Rear Electric Panel Assembly Complete - 208-240 Volt
For Gas and Steam Models ONLY
(includes illus. nos. 1 through 16)
883335 1 Rear Electric Panel Assembly Complete - 208-240 Volt
For Electric Heated Models ONLY
(includes illus. nos. 1 through 16)
882676 1 Rear Electric Panel Assembly Complete - 380-416 Volt
(includes illus. nos. 1 through 16)
15 151000 2 #6-32 Pal Nut
16 120765 1 Standard End Bracket

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

460-480 VAC Reversing Electric Relay Panel Assembly 49

Illus. No. Part No. Qty. Description

1 132458 1 24 VAC Reversing Contactor

2 150297 1 #10 x 1/2” Hex Head TEK Screw (green)
3 121010 1 L-70 Ground Lug
4 152004 1 5/16-18 Hex Nut
5 153002 1 5/16” Lock Washer
6 132459 1 24 VAC 3-Pole Blower Contactor
7 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
8 830208 1 Transformer Assembly (460 VAC) for Micro Models ONLY
824161 1 Transformer Assembly (460 VAC) for Non-Micro Models ONLY
9 120765 2 End Stop
10 322817 1 Mounting Plate ONLY
883327 1 460 VAC Reversing Rear Electric Panel Assembly Complete
For Micro Models ONLY
(includes illus. nos. 1 through 16)
--------* 1 460 VAC Reversing Rear Electric Panel Assembly Complete
For Non-Micro Models ONLY
(includes illus. nos. 1 through 16)
11 151000 2 #6-32 Pal Nut
12 150009 2 #6-32 x 1-1/2” Phillips Pan Head Machine Screw
13 120701 1 4-Position Terminal Block
14 135501 1 1-Amp Double-Pole Circuit Breaker
15 120768 2 35 x 15mm Din Rail (sold by the inch)
16 112068 1 3-Phase (3ø) Power Input Label
17 121300 1 Open/Closed Bushing
18 141403 1 Control Voltage Transformer (24V) for Micro Models ONLY

* Not available at time of printing. Contact factory for additional information.

Telephone: (508) 678-9000 Fax: (508) 678-9447

50 Steam Coil/Air Operated Steam Damper Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Steam Coil/Air Operated Steam Damper Assembly 51

Illus. No. Part No. Qty. Description

1 165013 1 Steam Coil Assembly

2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 880835 1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
8 153007 4 1/4” Lock Washer
9 152002 4 1/4-20 Hex Nut
10 115995 48 Steam Damper Gasket (sold by the inch)
11 102350 1 Steam Damper Foam (68-1/2” length)
12 151006 1 5/16-24 Stainless Steel Acorn Nut
13 152051 1 5/16-24 Right Hand Jam Nut
14 100495 1 11/16” Dia. x 3” Stroke Piston
15 323365 2 Left and Right Piston Support
16 152002 2 1/4-20 Hex Nut
17 153007 2 1/4” Lock Washer
18 100472 1 1/4” Poly x 1/8” M.P.T. Connector
19 143110 1 1/4” Poly-Flo Tubing
20 100472 1 1/4” Poly x 1/8” M.P.T. Connector
21 100496 1 1/8” Needle Valve
22 143238 1 1/8” Brass Close Nipple
23 100498 1 3-Way Micro Valve - 24 VAC
24 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
25 153010 2 #6 Star Washer
26 152000 2 #6-32 Hex Nut
27 330987 1 Micro Valve Support
28 152002 2 1/4-20 Hex Nut
29 153007 2 1/4” Lock Washer
30 100520 1 1/8” N.P.T. Silencer (muffler)

Telephone: (508) 678-9000 Fax: (508) 678-9447

52 Steam Coil/Mechanical Steam Damper Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Steam Coil/Mechanical Steam Damper Assembly 53

Illus. No. Part No. Qty. Description

1 165013 1 Steam Coil Assembly ONLY

2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 880835 1 Steam Damper Assembly
(includes illus. nos. 7, 8, and 9)
8 115995 48 Steam Damper Gasket (sold by the inch)
9 102350 1 68-1/2” Long Steam Damper Foam
10 309300 1 Rod Bracket
11 154300 1 1/2” x 3/32” Cotter Pin
12 153002 1 #10 Steel Burr
13 104052 1 Mechanical Steam Damper Actuator Rod
14 150110 2 #8-32 x 1/4” Phillips Round Head Machine Screw
15 153012 2 #8 Star Washer
16 312315 1 Mechanical Steam Damper Motor Mount
17 153022 1 #10 Steel Burr
18 154300 1 1/2” x 3/32” Cotter Pin
19 850268 1 Mechanical Steam Damper Arm
20 150110 2 #8-32 x 1/4” Phillips Head Machine Screw
21 153012 2 #8 Star Washer
22 312315 1 Mechanical Steam Damper Motor Mount
23 104054 1 Mechanical Steam Damper Motor
24 100511 1 Mechanical Steam Damper Switch Plate
25 122120 1 Mechanical Steam Damper Switch
26 150026 2 #4-40 x 5/8” Phillips Pan Head Machine Screw
27 122120 1 Mechanical Steam Damper Switch
28 150026 2 #4-40 x 5/8” Phillips Pan Head Machine Screw
29 153012 2 #8 Star Washer
30 150102 2 #8-32 x 3/8” Pan Head Machine Screw
31 --------* 1 Mechanical Steam Damper Motor Cam

* The mechanical steam damper motor cam is part of the mechanical steam damper motor.

Telephone: (508) 678-9000 Fax: (508) 678-9447

54 Outer Top/Back Guard Assemblies

Illus. No. Part No. Qty. Description

1 322809 1 Back Electrical Box Cover

2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
3* 314424 1 Gas Top Back Guard
322075 1 Electric Top Back Guard
4 150301 7 #8-18 x 7/16” Phillips Pan Head TEK Screw
5 150300 10 #10-16 x 1/2” Hex Washer TEK Screw
6* 312545 1 Outer Top
7 322082 1 Bottom Back Guard
(for models mfd. as of March 19, 2001)
322018 1 Bottom Back Guard
(for models mfd. prior to March 19, 2001)
8 150301 13 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 103500 4 Leveling Leg
10 882099 1 8” to 10” Transition Piece
(for models mfd. prior to March 19, 2001)

* There is no outer top or top back guard on steam models.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Microprocessor Coin Acceptors Listing 55

NOTE: Coin acceptors listed include optical switch.

Replacement optic switch for Hanke acceptors is Part No. 881143.
Replacement optic switch for Greenwald acceptors is Part No. 137056.

Single Coin*
ADC Part No. Nation Description

883363 United States 25¢ Hanke Optic Coin Acceptor with Four (4) Studs
(for models mfd. as of June 25, 2002)
882689 United States 25¢ Hanke Optic Coin Acceptor
(for models mfd. between June 15, 2000 and June 25, 2002)
125100 U.S. and Canada 25¢ Greenwald Optic Coin Acceptor
(for models mfd. prior to June 15, 2000)
125107 Australia 20¢ Greenwald Australian Optic Coin Acceptor
881768 Australia $1 Hanke Australian Optic Coin Acceptor
881604 Japan 100 Yen Hanke Optic Coin Acceptor
125103 --- 0.882 Token Greenwald Optic Coin Acceptor
125121 --- 0.800 Token Greenwald Optic Coin Acceptor
125133 Hong Kong $1 Greenwald Hong Kong Optic Coin Acceptor

Dual Coin*
881508 U.S. and Canada 10¢ / 25¢ Hanke Dual Optic Coin Acceptor
881842 Canada 25¢ / $1 Hanke Dual Optic Coin Acceptor
881542 United Kingdom 1£ / 20 Pence Hanke Dual Optic Coin Acceptor
881846 France 2 / 5 Franc Hanke Dual Optic Coin Acceptor
881541 Netherlands 25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor

* Consult factory for coin acceptors not listed.

Telephone: (508) 678-9000 Fax: (508) 678-9447

56 Coin Meter Replacement Parts

MAN0238

Illus. No. Part No. Qty. Description

1 125541 1 1/60 RPM 24 VAC / 60 Hz Meter Motor

125540 1 1/30 RPM 24 VAC / 50 Hz Meter Motor
2 125500 1 2-Point Cam
125501 1 3-Point Cam
125502 1 4-Point Cam
125503 1 5-Point Cam
125504 1 6-Point Cam
125506 1 8-Point Cam
125507 1 9-Point Cam
125508 1 10-Point Cam
125510 1 12-Point Cam
3 125515 1 Meter Switch “B” with Arm
4 125516 2 Meter Switch “A” or “C”

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Telephone: (508) 678-9000

Electrical Oven Component Application Chart

Oven Element Oven Wire Terminal Lug Bus Bar Oven Relay
kW Voltage Phase Wire P/N:
Assembly
Qty Kw Part No. Qty Size Part No. Qty Part No. 121011 Cat. No. Part No.
24 460/480 3Ø 3 or 4 824951 6 4 120009 1 #8 882559 1 121010 2 DPA33 131352
24 416 3Ø 3 or 4 826394 6 4 120009 1 #8 882558 1 121010 1 DPA33 131352
24 240 3Ø 3 883557 6 4 120009 1 #6 882556 1 121010 1 DPA63 131369
24 208 3Ø 3 or 4 824915 6 4 120008 1 #4 882553 1 121010 1 DPA73 131376
20 380 3Ø 3 or 4 826243 6 4 120007 1 #8 882558 1 121010 1 DPA33 131352
20 240 1Ø 2 883559 5 4 120009 1 #4 882552 1 121010 2 DPA93 131358
20 208 1Ø 2 883561 5 4 120008 1 #2 883384 1 121010 2 DPA93 131358
18 460/480 3Ø 3 or 4 883560 6 3 120007 1 #8 882559 1 121010 2 DPA33 131352
18 41 6 3Ø 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352
18 240 3Ø 3 883562 6 3 120007 1 #8 882558 1 121010 2 DPA43 131357
18 240 1Ø 2 883558 6 3 120007 1 #4 882552 1 121010 2 DPA73 131376
18 208 3Ø 3 or 4 824914 6 3 120006 1 #6 882556 1 121010 2 DPA53 131359
18 208 1Ø 2 883563 6 3 120006 1 #2 883384 1 121010 2 DPA93 131358
Fax: (508) 678-9447

15 380 3Ø 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352

57
58 Additional Parts Available

Part No. Description

114006 “WARNING - Fire Hazards” Label

112280 “Clean Lint Screen” Label
114001 “CAUTION - Exhaust/Lint Screen” Label
112533 “Phase 5 Coin Program Location Summary” Label
112534 “Phase 5 OPL Program Location Summary” Label
120100 3/8” Straight (BX) Connector
120300 3/8” x 45º (BX) Connector
120400 3/8” Red Jacket (BX) Insulator
120500 3/8” Jiffy Clip (BX) Retainer Clip
120600 3/8” Greenfield (BX)
120707 (2-Position) Terminal Strip
120708 (3-Position) Terminal Strip
120800 1/4” In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-on Wire Nut
121014 1/4” Insulated (female) Terminal
121026 Tab Receptacle Combination
121499 5-1/2” Harness Tie
121500 8” Harness Tie
122804 Manometer (Hydro Gauge) for Measuring Gas Pressure
404500 Almond Brush-In-Cap Bottle Touch-Up Paint
404502 White Brush-In-Cap Bottle Touch-Up Paint
404513 Wrinkle Blue Brush-In-Cap Bottle Touch-Up Paint

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

ADC 450342 1 - 05/08/00-25 2 * 09/24/01-25 3 * 10/10/02-25