Scribd
Upload
53 views

Proteus

The document provides instructions for installing a patch on the Proteus system. It involves connecting a laptop to the Proteus cabinet, running a program to save the original memory file and restore a patched file called AEC_DUK.mx. It describes selecting options in the program to save the original file, restore the patched file, and perform a checksum if needed to ensure no errors occurred.

Uploaded by

robertocadena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
53 views

Proteus

The document provides instructions for installing a patch on the Proteus system. It involves connecting a laptop to the Proteus cabinet, running a program to save the original memory file and restore a patched file called AEC_DUK.mx. It describes selecting options in the program to save the original file, restore the patched file, and perform a checksum if needed to ensure no errors occurred.

Uploaded by

robertocadena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Proteus, installation Patch: AEC_DUK.mx file.

Connect serial laptop cable to laptop plug at the I/F board at the Proteus electronic cabinet
Power Proteus system and Laptop
Run Jedi ASIAN.exe program.
1. It can be run from the
Dosbox_DOS emulator
program, click twice on

DOSbox.074 icon

Select 2 for Proteus.

Proteus JEDI generator


Asian.exe program will open

Select F6 to save memory Select F7 to Restore memory


Type in: c:\original.mx (or whatever file name.mx Type in: c:\AEC_DUK.mx
would like to use). A check sum might need to be done: press F1, then using
This file will be saved at Laptop c:\Dosbox\Proteus left or right arrow laptop keyboard go to Menu 5, then click
folder. A copy can be made on a flash drive or floppy F1 key, then press the F1 & v keys at the same time. Then
disk using laptop, this copy can be left at the site press letter r, then q, then ESC key, (ESC key might need
to be pressed again.
Power Proteus console off
Disconnect Serial cable
Power Proteus console back on and make sure th(ESC key might need to be pressed again.at there is not checksum or error
100 0106 on the console. If anything of them happens then go back to F1 then do a checksum again: Menu5/press F1/ press
F1 & v at the same time/ then press r, then press q, then press ESC key (ESC key might need to be pressed again).

You might also like