Scribd
Upload
60 views2 pages

5902 Spec Eng

Uploaded by

David Miguel Herrera Tenorio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views2 pages

5902 Spec Eng

Uploaded by

David Miguel Herrera Tenorio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

5902

Bell 202 modem


• Universal radio or leased-line telephone interface
• Soft carrier turnoff for rapid turn-around
• Excellent performance on poor lines
• Optional stand-alone versions for PC’s
• 3 year warranty on parts and labor
1

Product Data Sheet 5902


Specifications

5902 Bell 202 modem


General
Data Rate 1200 baud
Transmit Carrier Switched or constant
Duplex Full or half. Half duplex requires DTE to implement hardware RTS/CTS handshake
Wires Two or four
Transmit Level -35dBm to 0dBm into 600Ω, potentiometer adjustable
Receive Sensitivity -30dBm to +3dBm, potentiometer adjustable to -40dBm
Output and Input Impedance 600Ω balanced, transformer isolated
Anti-Streaming None, 10Sec, 30Sec, 60Sec
RTS/CTS Delay • Wire: 25ms, 50ms, 125ms, 250ms
• Radio: 67ms, 133ms, 266ms, 1000ms
CTS Hold Time 1ms, 8ms
Carrier Detect Delay • Wire: 19ms, 30ms, 51ms, 92ms
• Radio: 33ms, 67ms, 133ms, 265ms
Carrier Loss Delay 6ms, 10ms, 23ms, 39ms, constant carrier reception half duplex
Carrier Detect Level -30dBm, adjustable from -20dBm to -40dBm
Radio Transmit Key Output Optical coupler open collector transistor, 5 to 15VDC, 25mA
Visual Indicators Transmitted Data LED, Received Data LED, Clear to Send LED, Request to Send LED, Carrier Detect LED, Radio Key Output LED
Power Requirements • 5902 - 5V @ 60mA
• 5902SA - 115VAC at 10VA
Terminations 8 pole, removable terminal block, RJ45
Dimensions 4.25 inch (108 mm) wide, 4.625 inch (118 mm) high, 1.75 inch (44 mm) deep
Packaging Corrosion-resistant zinc-plated steel with black enamel paint
Environment 5% RH to 95 % RH, non-condensing, -40°C/F to 60°C/140°F
Safety cCSAus and cULus Class I, Division 2 Hazardous Area Rating, UL508 listed
Model Part Number Description
5902 297120 Bell 202 modem module, 1200 baud, FSK, 2/4 wire, with radio PTT key control & RF carrier detect
5902SA 297194 Same as 5902 but with a 115VAC AD adapter for connection to other PC’s or RS-232 devices
5902SAF 297195 Same as 5902SA but with a full duplex to half duplex converter - for devices without RTS/CTS support
Note: Serial communication cable sold separately

Disclaimer: Schneider Electric reserves the right to change product specifications. For more information visit www.schneider-electric.com.

© 2011 Schneider Electric. All rights reserved - August 2011

Telemetry & Remote SCADA Solutions | www.schneider-electric.com Document Number TBULM08022-01

You might also like