Scribd
Upload
209 views

Assignment 2 - Storage Systems

This document contains two assignments related to designing automated storage and retrieval systems. The first assignment involves designing a single-carousel or dual-carousel system to meet specified throughput requirements. The second assignment involves analyzing a proposed 10-aisle automated storage and retrieval system and determining how to modify the design to reduce costs while maintaining throughput. The student is asked to calculate throughput rates for different design options and recommend improvements.

Uploaded by

Trịnh Thị Khánh Trâm
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
209 views

Assignment 2 - Storage Systems

This document contains two assignments related to designing automated storage and retrieval systems. The first assignment involves designing a single-carousel or dual-carousel system to meet specified throughput requirements. The second assignment involves analyzing a proposed 10-aisle automated storage and retrieval system and determining how to modify the design to reduce costs while maintaining throughput. The student is asked to calculate throughput rates for different design options and recommend improvements.

Uploaded by

Trịnh Thị Khánh Trâm
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment 2

Due date: 25/12/2022


Group work – Submit on GG Form
Accepted format:
1. WORD (Typing full) OR
2. PDF (Scanned version of hand-writing)

1. A carousel storage system is to be designed to serve a mechanical assembly plant.


The specifications on the system are that it must have a total of 400 storage bins and
a throughput of at least 125 storage and retrieval transactions/hr. Two alternative
configurations are being considered: (1) a one-carousel system and (2) a two-
carousel system. In either case, the width of the carousel is to be 4.0 ft and the
spacing between carriers = 2.5 ft. One picker-operator will be required for the one-
carousel system and two picker-operators will be required for the two-carousel
system. In either system, vc = 75 ft/min. For the convenience of the picker-operator,
the height of the carousel will be limited to five bins. The standard time for a pick-
and-deposit operation at the load/unload station = 0.4 min if one part is picked or
stored per bin and 0.6 min if more than one part is picked or stored. Assume that
50% of the transactions will involve more than one part. Determine:
(a) The required length of the one-carousel system and
(b) The corresponding throughput rate;
(c) The required length of the two-carousel system and
(d) The corresponding throughput rate.
(e) Which system better satisfies the design specifications?

2. Your company is seeking proposals for an automated storage/retrieval system that


will have a throughput rate of 300 storage/retrieval transactions/hr during the one 8-
hr shift per day. The request for proposal indicates that the number of single-
command cycles is expected to be four times the number of dual-command cycles.
The first proposal received is from a vendor who specifies the following: 10 aisles,
each aisle 150 ft long and 50 ft high; horizontal and vertical speeds of the S/R
machine = 200 ft/min and 66.67 ft/min, respectively; and pick-and-deposit time =
0.3 min. As the responsible engineer for the project, you must analyze the proposal
and make recommendations accordingly. One of the difficulties you see in the
proposed AS/RS is the large number of S/R machines that would be required—one
for each of the 10 aisles. This makes the proposed system very expensive. Your
recommendation is to reduce the number of aisles from 10 to 6 and to select an S/R
machine with horizontal and vertical speeds of 300 ft/min and 100 ft/min,
respectively. Although each high-speed S/R machine is slightly more expensive than
the slower model, reducing the number of machines from 10 to 6 will significantly
reduce total cost. Also, fewer aisles will reduce the cost of the rack structure even
though each aisle will be somewhat larger since total storage capacity must remain
the same. The problem is that throughput rate will be adversely affected by the larger
rack system.
(a) Determine the throughput rate of the proposed 10-aisle AS/RS and calculate its
utilization relative to the specified 300 transactions/hr.
(b) Determine the length and height of a 6 aisle AS/RS whose storage capacity would
be the same as the proposed 10-aisle system.
(c) Determine the throughput rate of the 6-aisle AS/RS and calculate its utilization
relative to the specified 300 transactions/hr.
(d) Given the dilemma now confronting you, what other alternatives would you
analyze and recommendations would you make to improve the design of the system?

You might also like