Scribd
Upload
173 views

Handout Module 05 Part 3 Reinforced Concrete Column

The document provides examples of designing and analyzing reinforced concrete columns. It includes examples of calculating the safe service axial live load for square tied columns and round spiral columns given parameters like column dimensions, reinforcement, concrete strength, and dead loads. It also includes an example of designing a round spiral column to support given dead and live loads. The document ends with providing sample problems for readers to work on related to column design.

Uploaded by

CHRISTIAN DELA CRUZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views

Handout Module 05 Part 3 Reinforced Concrete Column

The document provides examples of designing and analyzing reinforced concrete columns. It includes examples of calculating the safe service axial live load for square tied columns and round spiral columns given parameters like column dimensions, reinforcement, concrete strength, and dead loads. It also includes an example of designing a round spiral column to support given dead and live loads. The document ends with providing sample problems for readers to work on related to column design.

Uploaded by

CHRISTIAN DELA CRUZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

15/11/2022

-------------------------
Reinforced Concrete Columns

-------------------------
AS3 - Architectural Structures : Module 05 (Part 3)

Outline Problem #5.1 (Example)


 Design & Analysis of Reinforced Concrete Columns  A square tied column 450 mm on each side is reinforced with 8-25mm
 Tied Column bars with fy=415 Mpa. Determine the safe service axial live load if the
 Spiral Column axial dead load on the column is 820 kN. Use f'c=21Mpa.

3 4

1
15/11/2022

Problem #5.1 (Example) Problem #5.1b (Example)


 A square tied column 450 mm on each side is reinforced with 8-25mm  If the column in Problem 5.1 is 4m high, is it a short or long column?
bars with fy=415 Mpa. Determine the safe service axial live load if the
axial dead load on the column is 820 kN. Use f'c=21Mpa.

Ans : Short Column

Ans : PL=1066.6 kN 5 6

Problem #5.1b (Example) Problem #5.2 (Example)


 If the column in Problem 5.1 is 4m high, is it a short or long column?  A round spiral Column having a diameter of 450 mm reinforced with six
25 mm bars having fy=345 Mpa. If the service axial dead load is 900kN,
Short Column determine the safe axial live load of the column. Use f'c=34 Mpa.
Long Column

Ans : Short Column Ans : PL=1527.3 kN

7 8

2
15/11/2022

Problem #5.2 (Example) Problem #5.3


 A round spiral Column having a diameter of 450 mm reinforced with six  Design a round spiral column to support an axial dead load of 900kN
25 mm bars having fy=345 Mpa. If the service axial dead load is 900kN, and an axial live load of 1300 kN. Assume that 3% longitudinal steel is
determine the safe axial live load of the column. Use f'c=34 Mpa. desired, f'c =27.6 Mpa, and fy=414 Mpa. Use 25mm main
reinforcement. Round off column diameter by increment of 25mm

Ans :
D=425 mm
Ast = 4256mm 2, 9bars
Ans : PL=1527.3 kN
9 10

Problem #5.3 Problem #5.4 (Example)


 Design a round spiral column to support an axial dead load of 900kN  From Problem 3, determine the minimum spacing of 10 mm spiral
and an axial live load of 1300 kN. Assume that 3% longitudinal steel is (fyt=275Mpa) with 30mm steel covering.
desired, f'c =27.6 Mpa, and fy=414 Mpa. Use 25mm main
reinforcement. Round off column diameter by increment of 25mm

Ans : Ans : s =52.1mm


D=425 mm
Ast = 4256mm 2, 9bars

11 12

3
15/11/2022

Problem #5.4 (Example) Problem #5.4 (Example)


 From Problem 3, determine the minimum spacing of 10 mm spiral  From Problem 3, determine the minimum spacing of 10 mm spiral
(fyt=275Mpa) with 30mm steel covering. (fyt=275Mpa) with 30mm steel covering.

Ans : s =52.1mm Ans : s =52.1mm

13 14

Problem Set
Problem #5.5
 Determine the carrying capacity of a 4.5m long column, with a
diameter of 500mm, has reinforcing bars consisting of 16-25mm. fc’
= 21 Mpa, fy = 275 Mpa. (Spiral Column) END OF LECTURE
Problem #5.6
 Determine the axial capacity of the column in Problem 5.5, if the said
column is 500mmx500mm with 12-25mm reinforcement. (Tied Column)
QUESTIONS?
Problem #5.7

 Using 10mm spirals, compute the required spiral spacing of


Problem 5.5 , cc=40mm. 15 16

You might also like