SERVICE MANUAL

Model: AWD80AGP

Contents

Downloaded from www.Manualslib.com manuals search engine

 1．Introduction ---------------------------------------------------------------------------------2

2．Technical data----------------------------------------------------------------------------------2

3．Control panel--- -------------------------------------------------------------------------------2

4．Functions---------------------------------------------------------------------------------------4

5．Constructive parts-----------------------------------------------------------------------------4

6．Installation--------------------------------------------------------------------------------------8

7．Alarms-------------------------------------------------------------------------------------------9

8．Diagnostics system-----------------------------------------------------------------------------9

9．Electrical circuit--------------------------------------------------------------------------------10

1. Introduction

Downloaded from www.Manualslib.com manuals search engine

 1.1 Purpose of this manual

The purpose of this service manual is to provide service engineers who already have basic

Knowledge necessary to repair air vent dryers with electronic control systems.

1.2 Important

Repairs to electrical appliances must be carried out only by qualified service engineers

Before touching internal components, always remove the plug from the power socket

2. Technical Data

Voltage 220V 60Hz

Weight 38 Kg
Heater 230V 2100W
Dimention
595*555*850mm
WxDxH
Drying system Air vented
Humidity control Conductimetric sensor
Motor Single-phase asynchronous motor with capacitor
Temperature control NTC sensor
Energy efficiency C
Error alarms 3

3．
．Control Panel

1 2 3 4 5 6 7 8

1. Buzzer 7. Indicator Lights

2

Downloaded from www.Manualslib.com manuals search engine

 2. Quick Drying
3. Half Load Cooling
4. Start Delay Anti-Crease
5. Display (LED) Filter
6. Start/Pause 8.Program Selector

4. Functions
3

Downloaded from www.Manualslib.com manuals search engine

 Buzzer
This function is used to indicate end of cycle

Start Delay
This function need to press before start/ pause

Quick
Only "Jeans" ,"Towels", "Normal" program ,you can use the function.
Quick option and Half Load option cannot be selected at the same time.

Half Load
Only “Jeans” “Towels” “Normal” ”Blankets” “Delicate” “Footwear” “Shirts” “Sport” cycle, you can
use the function.
Quick option and Half Load option cannot be selected at the same time.

Led display
When select a program, The Led display shows remaining time,
When select not correct program, the Led display shows error code

Start/ pause
After select the program ,press this button to start the dryer. the dryer cannot work if you open the

door during the drying cycle .the machine can continue to work after close the door and press the

start button .In this situation, “Start/pause” indicator blink in order to tell you to press the button.

Indicator lights

Drying: It shows the dryer is in drying phase

Cooling: It shows the dryer is in cooling phase ,there will be 10 minutes in this phase.
Anti-Crease: It shows the drying is finished and the anti-creasing routine begin ,it last 10
minutes for consul model,30 minutes for whirlpool model.
Filter： After use the dryer ,the indicator will blink and tell you should clean the filter.

5. Constructive Parts

Downloaded from www.Manualslib.com manuals search engine

 1. Door As 12 Vent Pipe
2. Control Panel As 13 Vent Pipe Cuff
3. Cabinet 14 Back Cover
4. Top Cover As 15 Reset Button As
5. Door Lock AS 16 Power Cord
6. Screw Cap 17 Vent Pipe Cover
7. Door Gasket 18 Under Base
8. Drum Supporter As 19 Adjustable Leg
9. Motor As 20 Leg
10. Micro-V Belt 21 Idler As
11. Drum AS

5.1 Control Panel As

22 Select Knob 29 Button Bracket

23 Knob Bracket 30 LED Display
24 Control Panel 31 PCB Case
25 Knob Shaft 32 Operate PCB
26 Select Button 33 Main PCB
27 Display Window 34 PCB Cover
28 Power Button

5.2 Motor As

Downloaded from www.Manualslib.com manuals search engine

 35 Front Fan Cover 40 Motor Fixture
36 Fan As 41 Motor
37 Rear Fan Cover 42 Capacitance
38 Venting Gasket 43 Motor Bracket
39 Motor Cushion 44 Relay Bracket

5.3 Door As

45 Door Outer Frame 49 Door Hinge Cap

46 Door Inner Window 50 Door Hinge
47 Door Inner Frame 51 Hinge Support Plate
48 Door Hook

Downloaded from www.Manualslib.com manuals search engine

 5.4 Drum Supporter As

52 Drum Support Cover 58 Lamp Gasket

53 Filter As 59 Lamp Cap
54 Lamp Socket 60 Felt
55 Lamp 61 Moisture Sensor
56 Drum Supporter 62 Venting Gasket B
57 Drum Guide Plate

5.5 Door Lock AS

63 Door Lock Body 66 Micro Switch

64 Hook Holder 67 Micro Switch Cover
65 Door Lock Cover 68 Hook Holder Spring

5.6 Drum As

Downloaded from www.Manualslib.com manuals search engine

 69 Inside Small Cover 78 Drum As Fixture
70 Lifter 79 Drum Shaft
71 Inside Bucket Rivet Joint Module 80 Inside Bucket Bearing Module
72 Heater Fixture B 81 Bearing Supporter B
73 Heater 82 Spring
74 Heater Plate 83 Spring Washer φ8
75 Thermostat 170℃ 84 Nut
76 Thermostat Fixture 85 Thermostat Fixture
77 Thermostat 85℃ 86 Bracket

Attachment Name Quantity

Hose 1

User Manual
1

6. Installation

6.1 Unpack all packaging, include the bottom foam, check the machine situation.

6.2 Install the dryer as follow steps:

6.21 Install the Vent Hose

There are two outlets in the dryer ,one is at the back ,the other is in the left side.

Connect the hose to whichever is the more convenient by pulling the ring nut (A)

From the vent outlet at the back ,aligning arrows of the hose and ring nut ,fastening

By screwing hose to the direction of arrow and pushing it firmly back into place .

the unused vent should be sealed with the special snap cover(B).

Downloaded from www.Manualslib.com manuals search engine

 6.22 Level adjustment

●Adjust the level to avoid vibration and noise

Machine must be placed in a clean place ,no water ,ice and combustible materials there.

To keep vibration and noise to a minimum when the dryer is in use ,it should be placed

on a firm level surface.

●If the dryer is not completely leveled ,loosen the locknuts ,adjust the adjustable feet to

Lower the dryer by turning right and to ascend it by turning left .Tighten the locknut after

Insuring the dryer is level.

7. Alarms

Alarm Description Possible Fault Action

Door is open Close the door
Harness disconnect Connect the harness
Dop Door switch Wire faulty Change wire
Door lock faulty Change door lock
PCB faulty Change PCB
NTC sensor faulty Change wire
E1 NTC sensor faulty PCB faulty Change PCB
Wire faulty Change wire
9

Downloaded from www.Manualslib.com manuals search engine

 Harness disconnect Connect the harness
Heater faulty Change heater
E2 Heater faulty PCB faulty Change PCB
Harness disconnect Connect the harness
Wire faulty Change wire

8. Diagnostics system

No. Fault Possible cause Solution

·Mains plug is not plugged in ·Plug in main socket
1 Dryer does not work
·door is open ·Close door
·Wrong program selected ·Choose proper program
·Filter clogged ·Clean filter
2 Drying results unsatisfactory ·Incorrect volume of laundry ·Comply recommended loading
·Sediment in the humidity volumes
sensor ·Clean the humidity sensor surface
Lamp in the drum does not ·Lamp is defective ·Replace lamp
3 work
The drying cycle end in a The load is not enough or the ·Choose a program with higher
very short time after the clothes is already dry enough drying level. e .g choose heavy
4
program started, “End” for the selected program strong program
indictor is on
Drying cycle lasts long time The load volume is excessive Reduce the clothes
5 unusually for the capacity of the dryer
·The thermostat is out of ·Press the reset button
connection because of ·Replace the heater
unnormal operation ·replace the thermostat
6 No heating ·The heater is faulty ·Replace the wire
·The thermostat is faulty ·Replace the pcb
·The wire is faulty
·The pcb is faulty
·The dryer is not level on the ·Adjust the adjustable foot
ground ·Connect the right voltage
7 Abnormal noise ·The voltage is not 220-230V ·Replace the motor
·The motor faulty ·Replace the micro-v belt
·The micro-v belt faulty

9 .Electrical circuit
Model: AWD80AGP (Galanz Model: DV-70Q1K)

10

Downloaded from www.Manualslib.com manuals search engine

 11

Downloaded from www.Manualslib.com manuals search engine