Scribd
Upload
608 views16 pages

Specification of Machine Tools.

Equipment specifications provide important details about a machine's manufacturing capacity, power requirements, fabrication methods, and other technical details. This allows engineers to understand equipment design and operating principles, order the correct equipment, forecast power needs, and ensure adherence to standards. The document then lists specifications for several types of machines, including vertical turret milling machines, tool grinding machines, lathes, surface grinding machines, and pillar drilling machines. Key details specified include dimensions, speeds, motors, weights, and functional ranges.

Uploaded by

Priya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
608 views16 pages

Specification of Machine Tools.

Equipment specifications provide important details about a machine's manufacturing capacity, power requirements, fabrication methods, and other technical details. This allows engineers to understand equipment design and operating principles, order the correct equipment, forecast power needs, and ensure adherence to standards. The document then lists specifications for several types of machines, including vertical turret milling machines, tool grinding machines, lathes, surface grinding machines, and pillar drilling machines. Key details specified include dimensions, speeds, motors, weights, and functional ranges.

Uploaded by

Priya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

SARATH CHANDRAN

RAHUL PRADEEP
PRATHIUSH
JISHNU KRISHNAN N V
WHAT IS EQUIPMENT SPECIFICATIONS ?
 They are written documents or manuals that stipulate the method of production

capacity, power requirement, fabrication methods & other finer details of the
equipment that makes it apt for use.

 It is important to an engineer as knowing the right surgery tools is to a surgeon.

 An engineer must have a clear understanding of equipment specifications to avoid

equipment breakages.

2
 Gives a better understanding of equipment design & operating principles.

 Helps order the right equipment.

 Enables to forecast power and processing demands.

 Facilitates selecting the right service conditions.

 Enables adherence to accurate specification standards.

3
VERTICAL TURRET MILLING MACHINE

4
SPECIFICATIONS OF VERTICAL TURRET MILLING MACHINE
Make: ESTEEM Type: 2S
Table Longitudinal Travel 762 mm
Work Table Size 229 x 1069 mm
Spindle Speed 80 – 2720 RPM
Main Drive Motor 3 HP
Head Tilt 450 Forward 450 Backward
Cross Travel 305 mm
Vertical Travel 407 mm
Machine Weight 950 Kgs
Maximum Workpiece Weight 300 Kgs
Overall Height 2160 mm

5
6
SPECIFICATIONS OF TOOL GRINDING MACHINE
Make: S.I.G.T (P) Ltd. Type: SG 4
Centre Height 150 mm
Capacity (Length x Width) 500 x 250 mm
Standard Grinding Wheel (Dia. x width) 200 x 20 mm
Wheel Balancing Stand 1
Maximum Height from Table to Grinding 275 mm
Wheel
Magnetic Chuck (Recommended) 500 x 200 mm
Electric Motor 1.5 KW, 3 Phase, 2 HP, 2800 RPM
Cross Feed Graduation 0.002 mm
Vertical Feed Graduation 0.05 mm
Net Weight 900 – 1000 Kgs

7
8
SPECIFICATIONS OF PRECISION LATHE MACHINE
Make: NAGMATI Type: GNM 1 Series
Swing Over Bed 350 mm
Swing Over Cross Slide 215 mm
Centre Height 175 mm
Swing in Gap No Gap
Admit between Centre 650 mm
Bed Width 240 mm
Spindle Speed 1500 RPM
Motor HP 2 HP (1.5 KW)
Lead Screw Diameter 25.4 mm
Feed Longitudinal 0.15 -0.86 mm
Thread Metric Pitches 0.5 – 6 mm
Net weight 900 – 1100 Kgs
Tailstock Quill Diameter 50 mm
Tail quill Travel 140 mm
Thread Inches 4 – 22 TPI 9
10
SPECIFICATIONS OF CENTRE LATHE MACHINE
Make: Mysore Kirloskar Ltd. Type: Turnmaster 35
Bed Length 1828.8 mm
Centre Height 150 mm
Spindle Bore 48 mm
Power 3 HP
Spindle Speed 1430 RPM
Machine Type Geared
Phase 3 Phase

11
12
SPECIFICATIONS OF RECIPROCATING SURFACE
GRINDING MACHINE
Make – Alex machine tool Type – NH 500
Grinding (L x W) 500 X 250 mm
Maximum Longitudinal Movement 550 mm
Maximum Cross Movement 280 mm
Grinding wheel( Dia. x Thickness x Bore) 220 x 20 x 50.8 mm
Grinding Wheel Speed 2850 RPM
Grinding Spindle Motor 2 HP
Machine Size( L x W x H) 1250 x 1450 x 1650 mm
Net Weight 1200 Kgs

13
14
SPECIFICATIONS OF PILLAR DRILLING MACHINE
Make : SAMPAT Machine Tools Type : BDM/RC 13 MM
Hole Diameter 25 – 50 mm
Drill Depth 500 mm
No Load speed 0 – 2000 RPM
Machine Type Semi-automatic , Manual
Variable Speed Yes
Drilling Diameter 40 mm

15

You might also like