Scribd
Upload
72 views

Control Por Bluetooth y Reconocimiento de Voz Con Arduino

This Arduino sketch controls LEDs connected to digital pins using voice commands received over Bluetooth from an Android phone. It sets the pin modes in setup() and uses a switch statement in loop() to turn individual pins on or off based on the character received from the phone, or to execute sequences and patterns by turning multiple pins on and off in succession.

Uploaded by

Jesús Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
72 views

Control Por Bluetooth y Reconocimiento de Voz Con Arduino

This Arduino sketch controls LEDs connected to digital pins using voice commands received over Bluetooth from an Android phone. It sets the pin modes in setup() and uses a switch statement in loop() to turn individual pins on or off based on the character received from the phone, or to execute sequences and patterns by turning multiple pins on and off in succession.

Uploaded by

Jesús Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

/*

Arduino Control Voice


Controla por reconocimiento de Voz desde un Teléfono android
por medio del bluetooth.
Conexiones:

Arduino Bluetooth HC06


5V VCC
GND GND
Pin0 TX
Pin1 RX

*/

int estado=1;
void setup(){
Serial.begin(9600);
pinMode(13,OUTPUT);
pinMode(12,OUTPUT);
pinMode(11,OUTPUT);
pinMode(10,OUTPUT);
pinMode(9,OUTPUT);
pinMode(8,OUTPUT);
pinMode(7,OUTPUT);
pinMode(6,OUTPUT);
}
void loop(){
if(Serial.available()>0){
estado = Serial.read();
}
if (estado =='a'){
digitalWrite(13,1);
}
if (estado =='b'){
digitalWrite(13,0);
}
if (estado =='c'){
digitalWrite(12,1);
}
if (estado =='d'){
digitalWrite(12,0);
}
if (estado =='e'){
digitalWrite(11,1);
}
if (estado =='f'){
digitalWrite(11,0);
}
if (estado =='g'){
digitalWrite(10,1);
}
if (estado =='h'){
digitalWrite(10,0);
}
if (estado =='i'){
digitalWrite(9,1);
}
if (estado =='j'){
digitalWrite(9,0);
}
if (estado =='k'){
digitalWrite(8,1);
}
if (estado =='l'){
digitalWrite(8,0);
}
if (estado =='m'){
digitalWrite(7,1);
}
if (estado =='n'){
digitalWrite(7,0);
}
if (estado =='o'){
digitalWrite(6,1);
}
if (estado =='p'){
digitalWrite(6,0);
}
if (estado =='q'){ //all off
digitalWrite(13,0);
digitalWrite(12,0);
digitalWrite(11,0);
digitalWrite(10,0);
digitalWrite(9,0);
digitalWrite(8,0);
digitalWrite(7,0);
digitalWrite(6,0);
}
if (estado =='r'){ // all on
digitalWrite(13,1);
digitalWrite(12,1);
digitalWrite(11,1);
digitalWrite(10,1);
digitalWrite(9,1);
digitalWrite(8,1);
digitalWrite(7,1);
digitalWrite(6,1);
}
if (estado =='s'){ // blink
digitalWrite(13,1);
digitalWrite(12,1);
digitalWrite(11,1);
digitalWrite(10,1);
digitalWrite(9,1);
digitalWrite(8,1);
digitalWrite(7,1);
digitalWrite(6,1);
delay(500);
digitalWrite(13,0);
digitalWrite(12,0);
digitalWrite(11,0);
digitalWrite(10,0);
digitalWrite(9,0);
digitalWrite(8,0);
digitalWrite(7,0);
digitalWrite(6,0);
delay(500);
}
if (estado =='t'){ //Sequence 1
digitalWrite(13,1);
delay(200);
digitalWrite(12,1);
delay(200);
digitalWrite(11,1);
delay(200);
digitalWrite(10,1);
delay(200);
digitalWrite(9,1);
delay(200);
digitalWrite(8,1);
delay(200);
digitalWrite(7,1);
delay(200);
digitalWrite(6,1);
delay(200);
digitalWrite(13,0);
digitalWrite(12,0);
digitalWrite(11,0);
digitalWrite(10,0);
digitalWrite(9,0);
digitalWrite(8,0);
digitalWrite(7,0);
digitalWrite(6,0);
delay(200);
}
if (estado =='u'){ //Sequence 2
}
if (estado =='v'){ //Sequence 3
digitalWrite(13,1);
delay(200);
digitalWrite(13,0);
digitalWrite(12,1);
delay(200);
digitalWrite(12,0);
digitalWrite(11,1);
delay(200);
digitalWrite(11,0);
digitalWrite(10,1);
delay(200);
digitalWrite(10,0);
digitalWrite(9,1);
delay(200);
digitalWrite(9,0);
digitalWrite(8,1);
delay(200);
digitalWrite(8,0);
digitalWrite(7,1);
delay(200);
digitalWrite(7,0);
digitalWrite(6,1);
delay(200);
digitalWrite(6,0);
digitalWrite(7,1);
delay(200);
digitalWrite(7,0);
digitalWrite(8,1);
delay(200);
digitalWrite(8,0);
digitalWrite(9,1);
delay(200);
digitalWrite(9,0);
digitalWrite(10,1);
delay(200);
digitalWrite(10,0);
digitalWrite(11,1);
delay(200);
digitalWrite(11,0);
digitalWrite(12,1);
delay(200);
digitalWrite(12,0);
}
}

You might also like