SmartPhone VI

Soundnet Operations
(Detailed Programming Instructions)
Keypad Programming Remote Programming
(Landline Phone Recommended)
Step 1: Begin Program Mode Step 1: Begin Program Mode
a. Press Enter a. Call into phone
Step 2: System Operation (a or b) b. After first simulated ring, press #, #
a. For SoundNet press 1, 9, Enter, 6 c. Key in security code (default is 1111)
b. For Standard Operation press 1, 9, Enter, 1 Step 2: System Operation (a or b)
Step 3: Program Emergency Numbers a. For SoundNet press 1, 9, *, 6
a. Press 1, Enter, (phone number), Stop b. For Standard Operation press 1, 9, *, 1
b. SoundNet press 2, 1, Enter, (11 digit Step 3: Program Emergency Numbers
Soundnet Code), Stop. To program a. Press 1, *, (phone number), *, #
numbers 2 - 5, repeat Step 3 a. b. SoundNet press 2, 1, *, (11 digit SoundNet
Example: To program emergency number Code),*, #
2, press 2, Enter, (phone number), Stop. To program numbers 2 - 5, repeat Step 3 a.
Note: If installed on a ring down line (no dial Example: To program emergency number 2, press 2, *,
tone) do not program a phone number, press (phone number), *, #. For a pause, press #,*.
the following: 1, 9, Enter, 2 (automatically sets Note: If installed on a ring down line
the timer for 3 minutes). (no dial tone) do not program a phone number, press the
Step 4: Program Location Message following: 1, 9, *, 2 (automatically sets the timer for 3
a. To turn on message press 1, 3, Enter, 2 minutes).
b. Press 6, Record, wait for the “beep”, then Step 4: Program Location Message
speak message, Stop. To replay message, a. To turn on message press 1, 3, *, 2
press 6, Play/Pause. b. Press 6, *, wait for the “beep”, then speak
c. Program frequency of message, press message, #. To replay message, press 6, #
1, 3, Enter, __ c. Program frequency of message, press
0 = No message 1, 3, *, __
2 = Plays message (2) times (default) 0 = No message
3 = Plays message until receiving party 2 = Plays message (2) times (default)
presses * 3 = Plays message until receiving party
Note: Called party can replay message by presses *
pressing *,*. Note: Called party can replay message by
Step 5: Exit Program Mode pressing *,*.
a. Press Stop for 3 seconds Step 5: Exit Program Mode
a. Press *, #, 0 (you will hear beep, beep) *, #
Optional Programming Features
Program Talk Timer Phone Line Check: (Default is 10 minutes)
(Default is 5 minutes, ring down is 3 minutes) Keypad: Press 3, 4, Enter, (4 digit number
Keypad: in HH:MM)
Press 8, ENTER, (3 digit number in minutes) To turn off, press 23, Enter, 3, 23, Enter,
Remote: 7284, 11, Enter, 2
Press 8, *, (3 digit number in minutes) Remote: Press 3, 4, *, (4 digit number in HH:MM)
Example: 2 minutes = 002 To turn off, press 23, *, 3, 23, *, 7284, 11, *, 2
Note: After talk time expires, phone will prompt Example: 20 minutes = 0020, 10 hours = 1000
called party to extend call for 3 minutes.
Consolidator Feature: (Allows up to (10) SmartPhones on a single
telephone line and toggle between them from an outside call)
Step 1: Begin Program Mode Step 4: Exit Program Mode
a. Press Enter a. Press Stop for 3 seconds
Step 2: Program ID Numbers for Phones 1-5 Step 5: Confirm Consolidator Operation
a. Press 7, Enter a. Dial phone number connected to
b. Press *, 1-5 for corresponding elevator 1-5 SmartPhones: All phones will answer
Step 3: Program ID Numbers for Phones 6-10 b. To select individual phone:
a. Press 7, Enter Press *1 (Phone #1) Press #1 (Phone #6)
Press *2 (Phone #2) Press #2 (Phone #7)
b. Press #, 1-5 for corresponding elevator 6-10 Press *3 (Phone #3) Press #3 (Phone #8)
Press *4 (Phone #4) Press #4 (Phone #9)
Press *5 (Phone #5) Press #5 (Phone #10)
Press *0 (All Phones)

RP8200911
N56W24720 N. Corporate Circle • Sussex, WI 53089 Ver. 7
MADE IN THE USA
3 YEAR WARRANTY 800-451-1460 • www.RATHCommunications.com 02/16
 Troubleshooting & Diagrams
SmartPhone VI

Initial Set-Up:
1. Diagnostic Test: Press Enter, 2, 6, Play/Pause phone will play back (5) Beeps (1st Beep=External Power Supply; 2nd
Beep=LED; 3rd Beep=Microphone; 4th Beep=Speaker; 5th Beep=Backup Battery). If any item fails during test you will hear
a Blat not a Beep. If you hear a Blat, contact RATH® Technical Support.
Note: If you receive a Blat for the LED, check the LED operation to be sure it is not working before contacting RATH® Technical Support.
2. Connect to standard RJ11 phone jack. If splicing connection, only hook up Red and Green Wires from the phone cable. If
connecting to a SmartRescue unit, you must connect all four wires (check for 24vdc or 48vdc supply at the splice).

Troubleshooting:
1. If the phone dials only one digit and hangs up, there is another Auto-Dialer on the line. You need to re-wire the system so
that the RATH® unit is either in parallel or ahead of it.
2. If the phone dials a couple of digits and gets a busy signal, the unit is installed on a switchboard line and needs to be
programmed to dial the appropriate access code to get an outside line (usually an 8 or 9).
3. If the phone does not respond, make sure the green LED (D1) on the circuit board is lit. If not, check to be sure the power is
properly connected.
4. If the phone is making phantom calls, it is installed on a Ring Down Line. You must turn off the “Telephone Line Check”
feature (see Optional Programming Instructions).

Wiring Diagrams: 12vac/dc Models:

Direct 12vac/dc Powered 120vac to 12vac/dc Powered

Re l a y A l a r m

Re l a y A l a r m

* *
RJ11

RJ11

Enter Enter
To Phone Line: To Phone Line:
Record
Requires a twisted Requires a twisted
Record
shielded pair. shielded pair.
When used with When used with
L E D Sw i tch
LED

Play/Pause Play/Pause

SmartRescue, SmartRescue,
S wi t ch

Stop requires two Stop requires two

+- twisted shielded +- twisted shielded
Bat
Bat MIC Speaker pairs. MIC Speaker pairs.
12vac/dc

12v
RJ11

RJ11

To 12vac/dc White/Neutral
Power Supply Transformer To 120vac
Note: If Elevator Communications Failure is Black/Hot
required, connect to our Alarm Relay. *

RP8200950
N56W24720 N. Corporate Circle • Sussex, WI 53089 Ver. 8
MADE IN THE USA
3 YEAR WARRANTY 800-451-1460 • www.RATHCommunications.com 02/16