Scribd
Upload
128 views

RCD Assignment 3

This document contains 12 design problems for reinforced concrete T-beams. The problems involve calculating required moments, determining required steel reinforcement areas, and designing beams to support given loads. Key parameters specified in the problems include beam dimensions, slab thicknesses, concrete strengths, steel yields, spans, center-to-center spacing, and design loads and moments. The objective is to size the steel reinforcement in the T-beams to safely support the given loading conditions.

Uploaded by

CE-Cret KuyaaDeee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
128 views

RCD Assignment 3

This document contains 12 design problems for reinforced concrete T-beams. The problems involve calculating required moments, determining required steel reinforcement areas, and designing beams to support given loads. Key parameters specified in the problems include beam dimensions, slab thicknesses, concrete strengths, steel yields, spans, center-to-center spacing, and design loads and moments. The objective is to size the steel reinforcement in the T-beams to safely support the given loading conditions.

Uploaded by

CE-Cret KuyaaDeee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

REINFORCED CONCRETE DESIGN ASSIGNMENT No.

3
1. Design a T-Beam for the floor system. 4. Design the steel reinforcement of the T-
Thickness of slab is 75mm and width of Beam which carries an ultimate moment
web is 375mm with an effective depth of Mu=136kN-m. fc’=20.7MPa,
of 600mm. The beam carries a dead load Fy=414.7MPa. The slab thickness is
moment of 270kN-m and a live load 100mm the width of flange is 450mm
moment of 460kN-m. it has a span of and that of the stem is 300mm. T-Beam
5.4m and has a spacing center to center has an effective depth of 440mm.
equal to 1.8m. fc’=20.7MPa,
Fy=344.7MPa. 5. Design a T-Beam, if the required
Mu=221kN-m. Assume that the tension
2. Design the T-Beam to carry the given steel yields fs=fy and that the N.A. lies
loads. Thickness of slab is 100mm and in the flange εc=strain in concrete,
the beam is spaced at 2.4m on centers εs=strain in steel.
having a thickness of 300mm and
effective depth of 485mm. 6. Design the T-Beam having a span of 6m
fc’=20.7MPa, Fy=413.7MPa. has a web thickness of 300mm and an
overall depth of 610mm with 60mm
steel covering. The beam are spaced of
1.2m center to center and the slab
thickness is 100mm. Determine the steel
area, required if the beam carries a
ultimate moment of 1300kN-m. Use
ultimate strength design with
fc’=28MPa, Fy=400MPa. Use ACI
Code.

7. Design a T-Beam having a safe resisting


moment of 769kN-m. Flange width of
250mm. the T-Beam is reinforced with
6-28mm, placed in two rows.
3. Determine the required As for the floor
fc’=27.6MPa, Fy=414.6MPa.
system. If the floor as a slab thickness of
100mm. which is supported by 6.5m
8. Design a T-Beam that could carry a safe
span length beam costs monolithically
live load of 22kN/m if it has a simple
with the slab, spacing of beams area
span of 6m. Slab thickness is 50mm and
2.4m on centers and have a web width
effective depth of 300mm, width of the
of 300mm and a total depth of 550mm.
web member is 200mm. Use 60mm steel
Assume steel covering of 65mm. The
covering. fc’=20MPa, Fy=400MPa,
beam carries a liveload moment of
spacing of beams =2.4m.
84kN-m (included the weight of the
floor system). Fc’=20.7MPa,
9. Design a T-Beam that could carry a load
Fy=413.7MPa.
of 306kN and has the ff. properties:
b=1200mm bw=300mm
d=600mm t=90mm

CENG 115 Page 1


REINFORCED CONCRETE DESIGN ASSIGNMENT No. 3
fc’=21MPa Fy=415MPa
span=5m

10. A reinforced concrete T-Beam has a


effective width of 1.5m and a slab
thickness of 0.15m. It is reinforced at
bottom with As=300mm2. The width of
stem is 400mm and has an effective
depth of 60mm. If fc’=28MPa and
Fy=410MPa. Design the T-Beam.

11. Design a rectangular reinforced concrete


beam that could carry a live load of
15kN/m and has a width of 250mm a
total depth of 500mm. It is reinforced
with 3-25mm diameter. fc’=28MPa and
Fy=415MPa. The beam is carrying a
slab 150mm thick, 5m wide. It has a
span of 6m. if the unit weight of
concrete is 24kN/m3.

12. Design a reinforced concrete T-Beam


carrying a safe moment of 136kN-m and
has a flange width of 750mm and a slab
thickness of 100mm. It has an effective
depth of 750mm and a width stem is
350mm and fc’=28MPa, Fy=410MPa.

CENG 115 Page 2

You might also like