Scribd
Upload
124 views3 pages

PowerLogic PM800 Series - PM810MG

The PM810 power meter is a discontinued power meter that measures current, voltage, frequency, power factors, apparent power, active power, reactive power, energy and power per phase. It has a LCD display, measures up to the 31st harmonic, samples at 128 samples per cycle, has inputs for currents from 0.005-10A and voltages from 0-600V, communicates via Modbus RS485, and has an IP30/IP52 rating. The PM810MG has been replaced by the PowerLogic PM8000-PM8240 panel mount meter.

Uploaded by

anon_370743546
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views3 pages

PowerLogic PM800 Series - PM810MG

The PM810 power meter is a discontinued power meter that measures current, voltage, frequency, power factors, apparent power, active power, reactive power, energy and power per phase. It has a LCD display, measures up to the 31st harmonic, samples at 128 samples per cycle, has inputs for currents from 0.005-10A and voltages from 0-600V, communicates via Modbus RS485, and has an IP30/IP52 rating. The PM810MG has been replaced by the PowerLogic PM8000-PM8240 panel mount meter.

Uploaded by

anon_370743546
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Product data sheet

Specifications

power meter PM810 - with display


PM810MG

Discontinued on: 31 December 2016

Discontinued

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range of product PowerLogic PM800

Device short name PM810

Product or component type Power meter

Complementary
Power quality analysis Up to the 31st harmonic

Type of measurement Current


Voltage
Frequency
Power factor total
Apparent power total
Active power total
Reactive power total
Apparent power per phase
Active power per phase
Reactive power per phase
Energy
Power factor per phase

Supply voltage 125...250 V DC


115...415 V AC 45...67 Hz
115...415 V AC 350...450 Hz

Network frequency 350...450 Hz


45...67 Hz

Maximum power consumption in 15 VA


VA

Display type Backlit LCD

Display resolution 6 lines

Sampling rate 128 samples/cycle

Measurement current 5 A


1 A

Input type Current 0.005...10 A (impedance <= 0.1 Ohm)

Measurement voltage 0…600 V AC phase to phase


0…347 V AC phase to neutral

Number of inputs 1 digital 0...5 mA 24...125 V AC/DC

Measurement accuracy Current 0.5 % 0.5...10 A


Voltage 0.2 % 10...227 V
Energy 0.2 %
Frequency 0.01 Hz
Power factor 0.002
Power 0.2 %

Oct 15, 2022 1


Accuracy class Class 2 reactive energy conforming to IEC 62053-23
Class 0.5S active energy conforming to IEC 62053-22
Class 0.2 active energy conforming to ANSI C12.20

Number of outputs 1 digital (static)

Communication port protocol Modbus 38.4 kbauds

Communication port support RS485

Data recording Min/max of instantaneous values


Time stamping
Without memory
Alarms
GPS synchronisation

Environment
Electromagnetic compatibility Immunity to impulse waves: , conforming to IEC 61000-4-12
Limits for harmonic current emissions: , conforming to IEC 61000-3-2
Conducted and radiated emissions: , conforming to EN 55011 class B
Electrostatic discharge immunity test: , class III, conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields: , class III, conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test: , class III, conforming to IEC 61000-4-4
1.2/50 µs shock waves immunity test: , class III, conforming to IEC 61000-4-5
Conducted RF disturbances: , class III, conforming to IEC 61000-4-6
Immunity to impulse waves: , class III, conforming to IEC 61000-4-8
Immunity to microbreaks and voltage drops: , class III, conforming to IEC 61000-4-11
Limitation of voltage changes, voltage fluctuations and flicker in low-voltage: , conforming to IEC
61000-3-3

Mounting mode Flush-mounted

Mounting support Panel

Type of installation Indoor installation

Overvoltage category III

IP degree of protection IP30 back: conforming to IEC 60529


IP52 front face: conforming to IEC 60529

Relative humidity 90 % at 40 °C

Pollution degree 2

Ambient air temperature for -25…70 °C


operation

Ambient air temperature for -40…85 °C


storage

Operating altitude 0...3000 m

Standards UL 508
CSA C22.2 No 14
IEC 61010-1

Product certifications cULus


CE

Width 96 mm

Depth 70 mm meter:

Height 96 mm

Net weight 0.6 kg

Offer Sustainability
Sustainable offer status Green Premium product

EU RoHS Directive Compliant


EU RoHS Declaration

Contractual warranty
Warranty 18 months

Recommended replacement(s)

2
Oct 15, 2022
PM810MG is replaced by:

PowerLogic PM8000 - PM8240 Panel mount meter - intermediate metering


1x METSEPM8240

Oct 15, 2022 3

You might also like