Scribd
Upload
299 views

Panoramic Elevators

This document summarizes the specifications for a KONE 3000S Monospace Standard Scenic elevator to be installed with the following key details: - It has a 2000kg carrying capacity and travels between 3 stops over 10.35 meters at 1 m/s - The concrete shaft is 3050mm wide by 2200mm deep with a 1710mm deep pit and 4280mm tall overhead - The elevator car is 2350mm wide by 1700mm deep by 2280mm tall with stainless steel finishes and glass walls - It has center opening doors at each floor and a gearless motor drive located in the shaft overhead

Uploaded by

Krishna PATEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
299 views

Panoramic Elevators

This document summarizes the specifications for a KONE 3000S Monospace Standard Scenic elevator to be installed with the following key details: - It has a 2000kg carrying capacity and travels between 3 stops over 10.35 meters at 1 m/s - The concrete shaft is 3050mm wide by 2200mm deep with a 1710mm deep pit and 4280mm tall overhead - The elevator car is 2350mm wide by 1700mm deep by 2280mm tall with stainless steel finishes and glass walls - It has center opening doors at each floor and a gearless motor drive located in the shaft overhead

Uploaded by

Krishna PATEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Equipment Name PPL6 / Group 36

Main data

KONE solution 1 x KONE 3000S Monospace Standard Scenic

Design [TS_MAINDATA(DESIGN_DESC_PRODUCT_MODEL:PWS3)]

Carrying Capacity 2000 kg or 26 persons

Speed 1 m/s

Travel 10.35 m

Stops The lift stops at 3 stops and has 3 loading points arranged on the main
access side.

Underlying standards EN81-20

Shaft Material

Shaft size 3050 mm wide x 2200 mm deep

Shaft pit depth 1710 mm

Shaft head height 4280 mm

Shaft Material Concrete

Visual kit for shaft Yes

Mechanical components

Counterweight Accessible spaces under the counterweight's passageway are not permitted
without additional safety measures.

Counterweight with No
Safety Gear

Car

Car measurements 2350 mm wide x 1700 mm deep x 2280 mm high

Car ceiling and lighting HSDDF-301

ST4 - Silver Brushed St. St. AISI304

www.kone.ae T-0001968572 175(203)


Car front wall ST4 - Silver Brushed St. St. AISI304

Car floor Local Floor by buyer / OthersNo decoration

Hand rail Handrail is on B and C and D Walls HR81TR-Glass wall handrail tube D38
Mirror polished stainless steel

Skirting ST4 - Silver Brushed St. St. AISI304

Operating and signal KDS330


elements, cabin ST4 - Silver Brushed St. St. AISI304
Round
Yes
Additional Options:
All (CRB_C + CRB_L)

Extra decoration weight 100 kg

Doors

Door measurements 1100 mm wide x 2100 mm internal height

Door type High duty landing door

Door design 1C,Two-panel centre opening

Car door AMD_Z


ST4 - Silver Brushed St. St. AISI304
To prevent injury to people by the self-closing doors, the cabin door is fitted
with a closing force limiter. This also reduces the risk of damage to the door
system or objects in the door area.
CL2 - Curtain of light L135

Car Door Sill Type – A N Sill without carpet profile


Side

A Extruded aluminium

Landing door Narrow Frame


ST4 - Silver Brushed St. St. AISI304
ST4 - Silver Brushed St. St. AISI304
N, Without labyrinth, without insulation
E-Expander Bolt

Landing Floor Marking Finish Fire Class


Number
ST4 - Silver Brushed St. St. N, Without labyrinth, without
3 3
AISI304 insulation

www.kone.ae T-0001968572 176(203)


ST4 - Silver Brushed St. St. N, Without labyrinth, without
2 2
AISI304 insulation
ST4 - Silver Brushed St. St. N, Without labyrinth, without
1 1
AISI304 insulation

Landing Door Sill N1 - Sill w/o carpet trim, in the well


Type

Landing Door Sill A - Extruded aluminium profile (standard w/o surface treatment)
Material

Operating and signal Landing Call Station: [GROUPSHAREDLCS_DOP(1)]


elements, stops KDS330 Series

A button for activating an external call is fitted at each stop.


Hall Lantern:
Hall Indicator
HI/HL floor(s)
STN LCD black background

Control system accessories

Axial in blow. 2 pc 120 m3/h


ABE M - Alarm bell, at main floor
CEL E - Car emergency lighting, existing light
DAL GP - Disturbance alarm, general, potential free
EBD A - Emergency battery drive, monospace elevator, automatic
FID BO - Fire detection, whole building, doors open
ISE M - Emergency intercom car - machine room
LOA_MO Lock with Emergency Opening Device
PAD C - Parking at pre-defined floor, doors closed
1-with pit ladder

Machinery

Machinery The machinery is designed as a gearless, three-phase synchronous motor


specification with integrated traction sheave made from abrasion-proof special casting.
The electromagnetic dual circuit brake is quietly activated by a brake
solenoids. The brake linings are made from asbestos-free material. A manual
brake release device is provided for emergency operation.
Machine output 10.7 kW

Nominal supply 29 A
current

Starting supply 58 A
current

Main Fuses 35 A

Power supply, 3 x 380 V, 60 Hz


machinery

www.kone.ae T-0001968572 177(203)


Power supply, cabin 230 V, 60 Hz
light

Arrangement The sound-insulated drive mechanism is fitted in the shaft head behind the
guide rails, on the counterweight side, directly on the guide rails. Therefore
there is no need for a separate machine room, which makes considerable
savings on building costs.

Control system

Control system Full collective Duplex


principle

Maintenance access Topmost floor 3


panel The operating elements for maintenance of the lift and for possible
emergency release are fitted in the maintenance access panel at the top
stop. As the operating elements are locked away, they can only be activated
by authorized personnel. Access to the operating elements must be
guaranteed at all times during the lift's operating periods. The maintenance
access panel is fitted directly to the shaft door floor frame. The surface of the
maintenance and emergency release panel is specified in zinc-coated sheet
steel, prepared for final painting on site
WMAPR - Landing wall with recess
ST4 Silver brushed stainless steel

www.kone.ae T-0001968572 178(203)

You might also like