Scribd
Upload
508 views

Lab Answers

Upon completion of this lab, you will be able to: Determine the number of subnets needed. Determine the number of hosts needed. Design an appropriate addressing scheme.

Uploaded by

Shi Ro
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
508 views

Lab Answers

Upon completion of this lab, you will be able to: Determine the number of subnets needed. Determine the number of hosts needed. Design an appropriate addressing scheme.

Uploaded by

Shi Ro
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Activity 3.5.

2: Subnetting Scenario 1 (answers)


Topology Diagram

Addressing Table
Device Interface Fa0/0 HQ S0/0/0 S0/0/1 Fa0/0 BRANCH1 Fa0/1 S0/0/0 Fa0/0 BRANCH2 Fa0/1 S0/0/1 PC1 PC2 PC3 PC4 PC5 NIC NIC NIC NIC NIC IP Address 192.168.9.129 192.168.9.161 192.168.9.97 192.168.9.193 192.168.9.1225 192.168.9.190 192.168.9.65 192.168.9.33 192.168.9.126 192.168.9.158 192.168.9.222 192.168.9.254 192.168.9.94 192.168.9.62 Subnet Mask 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 255.255.255.224 Default Gateway N/A N/A N/A N/A N/A N/A N/A N/A N/A 192.168.9.129 192.168.9.193 192.168.9.225 192.168.9.65 192.168.9.33

Learning Objectives
Upon completion of this lab, you will be able to: Determine the number of subnets needed. Determine the number of hosts needed. Design an appropriate addressing scheme.
Routing Protocols and Concepts v1.0 Activity 3.5.2 1 of 3

Copyright 2007, Cisco Systems, Inc.

Assign addresses and subnet mask pairs to device interfaces and hosts. Examine the use of the available network address space. Determine how static routing could be applied to the network.

Scenario
In this lab, you have been given the network address 192.168.9.0/24 to subnet and provide the IP addressing for the network shown in the Topology Diagram. The network has the following addressing requirements: The BRANCH1 LAN 1 will require 10 host IP addresses. The BRANCH1 LAN 2 will require 10 host IP addresses. The BRANCH2 LAN 1 will require 10 host IP addresses. The BRANCH2 LAN 2 will require 10 host IP addresses. The HQ LAN will require 20 host IP addresses. The link from HQ to BRANCH1 will require an IP address for each end of the link. The link from HQ to BRANCH2 will require an IP address for each end of the link.

Task 1: Examine the Network Requirements.


Examine the network requirements and answer the questions below. Keep in mind that IP addresses will be needed for each of the LAN interfaces. How many subnets are needed? _____7_____ What is the maximum number of IP addresses that are needed for a single subnet? _____21_____ How many IP addresses are needed for each of the branch LANs? _____11_____ What is the total number of IP addresses that are needed? _____69_____

Task 2: Design an IP Addressing Scheme.


Step 1: Subnet the 192.168.9.0 network into the appropriate number of subnets. What will the subnet mask be for the subnetworks? _____________255.255.255.224 or /27_____________ How many usable host IP addresses are there per subnet? _____30_____ Fill in the following chart with the subnet information. Subnet Number 0 1 2 3 4 5 6 7 First Usable Host Address 192.168.9.1 192.168.9.33 192.168.9.65 192.168.9.97 192.168.9.129 192.168.9.161 192.168.9.193 192.168.9.225 Last Usable Host Address 192.168.9.30 192.168.9.62 192.168.9.94 192.168.9.126 192.168.9.158 192.168.9.190 192.168.9.222 192.168.9.254 Broadcast Address 192.168.9.31 192.168.9.63 192.168.9.95 192.168.9.127 192.168.9.159 192.168.9.191 192.168.9.223 192.168.9.255

Subnet Address 192.168.9.0 192.168.9.32 192.168.9.64 192.168.9.96 192.168.9.128 192.168.9.160 192.168.9.192 192.168.9.224

Step 2: Assign the subnets to the network shown in the Topology Diagram. When assigning the subnets, keep in mind that routing will need to occur to allow information to be sent throughout the network. The subnets will be assigned to the networks to allow for route summarization on each of the routers.
Copyright 2007, Cisco Systems, Inc. Routing Protocols and Concepts v1.0 Activity 3.5.2 2 of 3

1. Assign subnet 1 to the BRANCH2 LAN 2: __________192.168.9.32 /27__________ 2. Assign subnet 2 to BRANCH2 LAN 1 subnet address: __________192.168.9.64 /27__________ 3. Assign subnet 3 to link from HQ to BRANCH2 subnet address: __________192.168.9.96 /27__________ 4. Assign subnet 4 to HQ LAN subnet address: __________192.168.9.128 /27__________ 5. Assign subnet 5 to link from HQ to BRANCH1 subnet address: __________192.168.9.160 /27__________ 6. Assign subnet 6 to BRANCH1 LAN 2 subnet address: __________192.168.9.192 /27__________ 7. Assign subnet 7 to BRANCH1 LAN 1 subnet address: __________192.168.9.224 /27__________

Task 3: Assign IP Addresses to the Network Devices


Assign the appropriate addresses to the device interfaces. Document the addresses to be used in the Addressing Table provided under the Topology Diagram. Step 1: Assign addresses to the HQ router. 1. Assign the first valid host address in the HQ LAN subnet to the LAN interface. 2. Assign the first valid host address in link from HQ to BRANCH1 subnet to the S0/0/0 interface. 3. Assign the first valid host address in link from HQ to BRANCH2 subnet to the S0/0/1 interface. Step 2: Assign addresses to the BRANCH1 router. 1. Assign the first valid host address in the BRANCH1 LAN 1 subnet to the Fa0/0 LAN interface. 2. Assign the first valid host address in the BRANCH1 LAN 2 subnet to the Fa0/1 LAN interface. 3. Assign the last valid host address in link from HQ to BRANCH1 subnet to the WAN interface. Step 3: Assign addresses to the BRANCH2 router. 1. Assign the first valid host address in the BRANCH2 LAN 1 subnet to the Fa0/0 LAN interface. 2. Assign the first valid host address in the BRANCH2 LAN 2 subnet to the Fa0/1 LAN interface. 3. Assign the last valid host address in link from HQ to BRANCH2 subnet to the WAN interface. Step 4: Assign addresses to the host PCs. 1. Assign the last valid host address in the HQ LAN subnet to PC1. 2. Assign the last valid host address in the BRANCH1 LAN 1 subnet to PC2. 3. Assign the last valid host address in the BRANCH1 LAN 2 subnet to PC3. 4. Assign the last valid host address in the BRANCH2 LAN 1 subnet to PC4. 5. Assign the last valid host address in the BRANCH2 LAN 2 subnet to PC5.

Copyright 2007, Cisco Systems, Inc.

Routing Protocols and Concepts v1.0 Activity 3.5.2

3 of 3

You might also like