A SEMINAR REPORT

As partial requirement for the degree of Bachelor of Computer Application

ON

JAVA RING

SUBMITTED BY

Name: Mr. KUMAVAT KIRAN KUMAR M.

University Exam No. :202
UNDER GUIDANCE OF

Dr. Darshna Rajput

COMPUTER SCIENCE DEPARTMENT,

Dolat-Usha Institute Of Applied Sciences And Dhiru-Sarla

Institute of Management & Commerce, Valsad

Affiliated with
Veer Narmad South Gujarat University, Surat

* 2019 - 2020 *
 Computer Department

CERTIFICATE
This is to certify that the seminar presentation is satisfactorily carried out on
JAVA RING is a work done
by Mr. KIRAN KUMAR KUMAVAT M. in partial fulfillment of the
requirement for the award of the degree of bachelor of computer applications
during the academic year 2019 - 2020.
I appreciate his/ her hard work, honesty and discipline during the training for
concerned seminar presentation in our organization.

__________________ ___________________
Dr. Snehal Joshi Dr. Pankaj Desai
Head of Department Principal

__________________ Internal Assessment By

Dr. Darshna Rajput 1. ________________
Seminar Internal Guide 2. ________________

Presentation Certified Date : _____________

At T.Y.B.C.A Examination Examiners:
1. ________________
2. ________________
 ACKNOWLEDGEMENT

First of all, I am indebted to the GOD almighty for giving me an

opportunity to excel in my efforts to complete this seminar on time. I am
extremely grateful to Dr. Darshna Rajputfor providing all the required
resources for the successful completion of my seminar.
My heart felt gratitude to my seminar guide Senior Lecturer,
Information Technology, for her valuable suggestions and guidance in
the preparation of the seminar report.
I express my thanks to you and all staff members and friends for all the
help and co-ordination extended in bringing out this seminar
successfully in time.
I will be failing in duty if I do not acknowledge with grateful thanks to
the authors of the references and other literatures referred to in this
seminar. Last but not the least; I am very much thankful to my parents
who guided me in every step which I took.

Thanking You
KUMAVAT KIRANKUMAR M
 INDEX

SR. NO TOPIC NAME PAGE

NO.
1 INTRODUCTION 1
2 COMPONENTS 5
3 ADVANTAGES 18
4 DISADVANTAGES 18
5 CONCLUSION 19
6 REFERENCES 20
8 PRESENTATION SLIDE
 1.INTRODUCTION

The Java Ring is a stainless-steel ring, 16-millimeters (0.6 inches) in diameter that houses a
1-million-transistor processor, called an iButton. The ring has 134 KB of RAM, 32 KB of ROM,
a real-time clock and a Java virtual machine, which is a piece of software that recognizes the
Java language and translates it for the user's computer system.

At Celebration School, the rings have been programmed to store electronic cash to pay for
lunches, automatically unlock doors, take attendance, store a student's medical information and
allow students to check out books. All of this information is stored on the ring's iButton.
Students simply press the signet of their Java Ring against the Blue Dot receptor, and the system
connected to the receptor performs the function that the applet instructs it to. In the future, the
Java Ring may start your car.

Mobile computing is beginning to break the chains that tie us to our desks, but many of
today's mobile devices can still be a bit awkward to carry around. In the next age of computing,
we will see an explosion of computer parts across our bodies, rather than across our desktops.
Digital jewelry, designed to supplement the personal computer, will be the evolution in digital
technology that makes computer elements entirely compatible with the human form.

The Java Ring, first introduced at Java One Conference, has been tested at Celebration
School, an innovative K-12 school just outside Orlando; FL.The rings given to students are
programmed with Java applets that communicate with host applications on networked systems.
Applets are small applications that are designed to be run within another application. The Java
Ring is snapped into a reader, called a Blue Dot receptor, to allow communication between a
host system and the Java Ring.

1
 Figure 1: prototype of stainless steel java ring.

2.HISTORY
2
 In the summer of 1989, Dallas Semiconductor Corp. produced the first stainless- steel
encapsulated memory devices utilizing the Dallas Semiconductor 1-Wire communication
protocol. By 1990, this protocol had been refined and employed in a variety of self-contained
memory devices. Originally called "touch memory" devices, they were later renamed "iButtons."
Packaged like batteries, iButtons have only a single active electrical contact on the top surface,
with the stainless steel shell serving as ground.

Data can be read from or written to the memory serially through a simple and
inexpensive RS232C serial port adapter, which also supplies the power required to perform the
I/O. The iButton memory can be read or written with a momentary contact to the "Blue Dot"
receptor provided by the adapter. When not connected to the serial port adapter, memory data is
maintained in non-volatile random access memory (NVRAM) by a lifetime lithium energy
supply that will maintain the memory content for at least 10 years. Unlike electrically erasable
programmable read-only memory (EEPROM), the NVRAM iButton memory can be erased and
rewritten as often as necessary without wearing out. It can also be erased or rewritten at the high
speeds typical of complementary metal oxide semiconductor (CMOS) memory, without
requiring the time-consuming programming of EEPROM.

Since their introduction, iButton memory devices have been deployed in vast quantities
as rugged portable data carriers, often in harsh environmental conditions. Among the large-scale
uses are as transit fare carriers in Istanbul, Turkey; as maintenance record carriers on the sides of
Ryder trucks; and as mailbox identifiers inside the mail compartments of the U.S. Postal
Service's outdoor mailboxes. They are worn as earrings by cows in Canada to hold vaccination
records, and they are used by agricultural workers in many areas as rugged substitutes for
timecards.

The iButton product line and its many applications are described at Dallas
Semiconductor's iButton Web site, which is listed in the Resources section. Every iButton
product is manufactured with a unique 8-byte serial number and carries a guarantee that no two
parts will ever have the same number. Among the simplest iButtons are memory devices that can
3
hold files and subdirectories and can be read and written like small floppy disks. In addition to
these, there are iButtons with password protected file areas for security applications, iButtons
that count the number of times they have been rewritten for securing financial transactions,
iButtons with temperature sensors, iButtons with continuously running date/time clocks, and
even iButtons containing powerful microprocessors. The java ring was first introduced in the
year 1998, in the java one conference .the ring was built by the Dalas semiconductor corporation.

2.1 The postal security device

For over 10 years, Dallas Semiconductor also has been designing, making, and selling a
line of highly secure microprocessors that are used in satellite TV descramblers, automatic teller
machines, point-of-sale terminals, and other similar applications requiring cryptographic security
and high resistance to attack by hackers. The U.S. Postal Service's (USPS) Information Based
Indicia Program Postal Security Device Specification, intended to permit printing of valid U.S.
postage on any PC, provided the first opportunity to combine two areas of expertise when a
secure microprocessor was designed into an iButton the resulting product, named the Crypto
iButton, combines high processor performance, high-speed cryptographic primitives, and
exceptional protection against physical and cryptographic attack. For example, the large integer
modular exponentiation engine can perform 1024-bit modular exponentiations with a 1024-bit
exponent in significantly less than a second. The ability to perform large integer modular
exponentiations at high speedis central to RSA encryption, Diffie- Hellman key exchange,
Digital Signature Standard (FIPS 186), and many other modern cryptographic operations. An
agreement between Dallas Semiconductor and RSA Data Security Inc. provides a paid-up license
for anyone using the Crypto iButton to perform RSA encryption and digital signatures so that no
further licensing of the RSA encryption technology is required. High security is afforded by the
ability to erase the contents of NVRAM extremely quickly. This feature, rapid eroization, is a
requirement for high security devices that may be subjected to attacks by hackers. As a result of
its high security, the Crypto iButton is expected to win the FIPS 140-1 security certification by
the National Institute of Standards and Technology (NIST). A special operating system was
designed and stored in the ROM of the Crypto iButton to support cryptography and general-
purpose financial transactions -- such as those required by the Postal Service program. While not

4
a Java virtual machine, the Ecommerce firmware designed for this application had several points
of similarity with Java, including an object-oriented design and a byte code interpreter to
interpret and execute Dallas Semiconductor's custom-designed E-Commerce Script Language. A
compiler was also written to compile the high-level language representation of the Script
Language to a byte code form that could be interpreted by the E-Commerce VM. Although the
E-Commerce firmware was intended primarily for the USPS application, the firmware supports a
variety of general electronic commerce models that are suitable for many different applications.
The E-Commerce firmware also supports cryptographic protocols for secure information
exchange such as the Simple Key-Management for Internet Protocol (SKIP) developed by Sun
Microsystems Inc. The E-Commerce iButton and the SDK for programming it are described in
detail on the Crypto iButton home page.

3. COMPONENTS

The main components of the java ring are following:-

o JAVA VIRTUAL MACHINE(JVM)

o 134KB OF RAM
o 32KB OF RAM
o REAL TIME CLOCK
o IBUTTON
o BLUE DOT RECEPTOR

3.1. JAVA VIRUAL MACHINE

Java ring is programmed with java application program and applets that communicate
with the host application on the networked system. Applets are the small application that is
designed to run on the another application system. The java virtual machine is the piece of

5
software that recognizes the java language and translate the byte code ,which is used by the
system which is connected to the java ring via ring reader.

At Celebration School, the rings have been programmed to store electronic cash to pay
for lunches, automatically unlock doors, take attendance, store a student's medical information
and allow students to check out books. All of this information is stored on the ring's iButton.
Students simply press the signet of their Java Ring against the Blue Dot receptor, and the system
connected to the receptor performs the function that the applet instructs it to. In the future, the
Java Ring may start your car.

Mobile computing is beginning to break the chains that tie us to our desks, but many of
today's mobile devices can still be a bit awkward to carry around. In the next age of computing,
we will see an explosion of computer parts across our bodies, rather than across our desktops.
Digital jewelry, designed to supplement the personal computer, will be the evolution in digital
technology that makes computer elements entirely compatible with the human form.

3.2. RAM

Java ring contains 134kb of non-volatile random access memory. Program and data is
stored in this non-volatile random access memory .This non-volatile random access memory
offers high read/write speed and also provides temper resistance through instantaneous clearing
of all memory when tempering is detected. This process is called rapid zeroization.The NVRAM
iButton memory can be erased or rewritten as often as necessary without wearing out.
Highsecurity is offered by the ability to erase the content of NVRAM extremely quickly.

The Crypto iButton also provides an excellent hardware platform for executing Java
because it utilizes NVRAM for program and data storage. With 6 kilobytes of existing NVRAM
and the potential to expand the NVRAM capacity to as much as 128 kilobytes in the existing
iButton form factor, the Crypto iButton can execute Java with a relatively large Java stack
situated in NVRAM. This memory acts as conventional high-speed RAM when the processor is
executing, and the lithium energy preserves the complete state of the machine while the Java

6
Ring is disconnected from the reader. There is therefore no requirement to deal with persistent
objects in a special way -- objects persist or not depending on their scope so the programmer has
complete control over object persistence. As in standard Java, the Java iButton contains a
garbage collector that collects any objects that are out of scope and recycles the memory for
future use. Applets can be loaded and unloaded from the Java iButton as often as needed. All the
applets currently loaded in a Java iButton are effectively executing at zero speed any time the
iButton is not in contact with a Blue Dot receptor. As the Java Card 2.0 specification was
proposed, Dallas Semiconductor became a JavaSoft licensee. The agreement called for the
development of a Java Card 2.0 implementation and also for the design of "plus portions" that
take advantage of the unique capabilities afforded by the Crypto iButtons NVRAM, such as the
ability to support a true Java stack and garbage collection. With the addition of the continuously
running lithium-powered time-of day clock and the high-speed, large-integer modular
exponentiation engine.

3.3. ROM

The java ring contains 32kb of ROM .A special kind of operating system called
Ecommerce. operating system which is based on java and JVM is stored in the ROM.This
operating system handles all the operation which is happening in the iButton. It is stored in ROM
because it is not supposed to be altered by the user. The Crypto iButton hardware platform offers
a unique set of special features expressly designed to prevent private keys and other confidential
information from becoming available to hackers.

Figure shows a detail of the internal construction of the Crypto iButton. The silicon die
containing the processor, ROM, and NVRAM memory is metallurgically bonded to the barrier
substrate through which all electrical contacts are made. This barrier substrate and the triple-
layer metal construction techniques employed in the silicon fabrication effectively deny access to
the data stored in the NVRAM. If any attempt is made to penetrate these barriers, the NVRAM
data is immediately erased. This construction technique and the use of NVRAM for the storage

7
of private keys and other confidential data provides a much higher degree of data security than
that afforded by EEPROM memory. The fact that the communication path between the Crypto
iButton and the outside world is limited to a single data line provides additional security against
hardware attacks by limiting the range of signals accessible to the hacker.

In addition, the processor itself is driven by an unstabilized ring oscillator operating over
a range of 10 to 20 megahertz, so that the clock frequency of the processor is not constant and
cannot be determined by external means. This differs from the design of alternative devices in
which the processor clock signal is injected by the reader and is therefore exactly determined by
the host processor. External control of the clock provides a valuable tool to hackers, since they
can repetitively cycle such a processor to the same point in its execution simply by applying the
same number of clock cycles. Control of the clock also affords a means to induce a calculation
error and thereby obtain information that can ultimately reveal secret encryption keys. A 32-
kilohertz crystal oscillator is used in the Java iButton to operate the time-of-day clock at a
constant and well-controlled frequency that is independent of the processor clock.

3.4. IButton

8
 Figure : structure of the iButton

The jewel of the java ring is the java iButton .It contains the one million transistor
processor single chip trusted microprocessor with powerful java virtual machine(JVM) housed in
rugged and secure stainless steel case. The Crypto iButton hardware platform offers a unique set
of special features expressly designed to prevent private keys and other confidential information
from becoming available to hackers. Figure 1 shows a detail of the internal construction of the
Crypto iButton. The silicon die containing the processor, ROM, and NVRAM memory is
metallurgically bonded to the barrier substrate through which all electrical contacts are made.
This barrier substrate and the triple-layer metal construction techniques employed in the silicon
fabrication effectively deny access to the data stored in the NVRAM. If any attempt is made to
penetrate these barriers, the NVRAM data is immediately erased. This construction technique
and the use of NVRAM for the storage of private keys and other confidential data provides a
much higher degree of data security than that afforded by EEPROM memory. The fact that the
communication path between the Crypto iButton and the outside world is limited to a single data
line provides additional security against hardware attacks by limiting the range of signals
accessible to the hacker.

9
 In addition, the processor itself is driven by an unstabilized ring oscillator operating over
a range of 10 to 20 megahertz, so that the clock frequency of the processor is not constant and
cannot be determined by external means. This differs from the design of alternative devices in
which the processor clock signal is injected by the reader and is therefore exactly determined by
the host processor. External control of the clock provides a valuable tool to hackers, since they
can repetitively cycle such a processor to the same point in its execution simply by applying the
same number of clock cycles. Control of the clock also affords a means to induce a calculation
error and thereby obtain information that can ultimately reveal secret encryption keys. A 32-
kilohertz crystal oscillator is used in the Java iButton to operate the time-of-day clock at a
constant and well-controlled frequency that is independent of the processor clock. It is originally
called touch memory devices they were later renamed as “iButtons packaged” like batteries.
IButton have only a single active electrical contact on the top surface and with the stainless steel
shell serving as ground. Every iButton product is manufactured with unique 8 byte serial number
and carries a guaranty that no two IButtons have same number. Among the simplest iButton are
memory devices which can hold files and directories that can be read and written like small
floppy disks. An iButton is a microchip similar to those used in smart card but housed in a round
stainless steel button of 17.35mm x 3.1mm - 5.89mm in size (depending on the function). The
iButton was invented and is still manufactured exclusively by Dallas semiconductor mainly for
applications in harsh and demanding environments. Like a smart card, an iButton does not have
an internal power source. It requires connection to a reader (known as a Blue Dot Receptor) in
order to be supplied with power and to receive input and send output. Unlike some smart cards,
there are currently no contactless iButtons: they require physical contact with a reader to
function.

There are iButtons that measure temperature (for food storage and transport); have an
electronic ID (for physical access to buildings); and store e-cash (for purchases both in stores and
via the web). For e-commerce applications, the iButton can support Java Card 2.0/OpenCard
standard in addition to proprietary software. iButtons have an advantage over conventional smart
cards in term of durability and longevity. The stainless steel casing gives iButton a far greater
ability to survive in a range of temperatures -- all versions are functional from -40 C to +70 C --
and in a much harsher range of environments (such as exposure to salt water and long term

10
exposure to physical impacts) than the plastic smart card. For e-commerce and personal ID
usage, iButtons can be mounted on a range of personal accessories: watch, ring, key chain, or
dog tag. Among the major successes for the iButton have been its use in Turkey as an epurse for
the mass transit system; in Argentina and Brazil for parking meters; and in the United States as
Blue Mailbox attachments that improve postal efficiency.

Figures 3.4.2: different types of iButtons available in the market

3.5. BLUE DOT RECEPTOR

11
 The read/write operation in the java ring is done by the blue dot receptor provided by the
RS232 serial port adapter. The DS1402D-DR8 is a part of the DS1402 series. It is a 1-Wire
network cable designed to connect any serial or USB 1-Wire port adapter that has a RJ11 jack
with up to two iButtons simultaneously. The DS1402D-DR8 Blue Dot receptor cable can touch
any iButton for reading, but can only retain the F5 version iButtons.

Key Features:-
⮚ Coiled cable for connecting iButtons to 1-Wire networks (8 ft when fully extended).
⮚ Convenient, off-the-shelf connectivity.
⮚ For momentary (F3/F5 MicroCan) or dwelled contact (F5 MicroCan only).
⮚ Adhesive pad for mounting on objects.
⮚ Supports for up to two iButtons at once.
⮚ Can be used with any EDS host adapter equipped with a RJ11 jack (HA7Net, A7E,HA5-
xxxR, and HA4B)
⮚ Can be used with any Dallas Semiconductor port adapter. (DS9097E,
DS9097U,DS9490R)

The DS1402 series incorporates four basic types of connectors, 1-Wire RJ-11, iButton,
Touch-and-Hold Probe, and Blue Dot™ Receptor. The DS1402 series of 1-Wire network cables
provides connectivity for iButtons. The cables are designed to connect any USB, serial, or
parallel port 1-Wire adapter to any iButton. Both, the iButton probe cables and the Blue Dot
receptor cables can touch any iButton, but can only hold the F5 version iButtons. The
DS1402BR8 is the only cable that connects to the DS1401 iButton Holder. Applications of the
DS1402-series 1-Wire network cables range from software protection and access control to asset
management and thermal monitoring through handheld computers.IButton and 1-Wire are
registered trademarks of Dallas Semiconductor Corporation. The DS1402D Blue Dot Receptors
are iButton reader/probes that provide a convenient pipeline into the PC for iButton-to-PC
communication. The receptor's cable connects to a USB, serial or parallel-port 1- Wire adapter,
whichever type of port you wish to use. The receptor itself easily affixes to any accessible spot
on the front of the PC. The user can elect a quick information transfer with a momentary touch of

12
the iButton to the Blue Dot. For hands-free operation the iButton can be snapped into the Blue
Dot and remain there.

Each receptor contains two Blue Dots to accommodate instances where multiple iButtons are
required for a transaction. A company's policy may, for example, require both an employee and a
supervisor to authenticate access to sensitive information stored on a network server.

Figures3.5: different types of blue dot receptor in the market.

13
WORKING

Figure : how java ring is used to open the door

Since java ring is programmed with the applets and the programming is done according
to our application and this will specific for the specific user. All information of the user is stored
in the java ring. Figure 4: how java ring is used to open the door User simply has to press the
signet of the java ring against the blue dot receptor and the system connected to the receptor
performs the function that the applets instruct it to.java ring has the user profile and the same
profile is present in the door embedded system also, when the user press the signet of the java
ring against the java ring reader which is embedded at the handle of the door the data is
transferred from the ring to door system. if the profile is authentic means user is authentic to
open the door the applets president in the ring instruct the door to open. Information is
transferred between iButton and a PC with a momentary contact, at up to 142K bits per second.
To do that one presses iButton to the Blue Dot receptor, a $15 pipeline into PC. The Blue Dot
sticks to any convenient spot on the front of a PC and is cabled to the serial or parallel port in the
back. According to the Dallas Superconductor's information, over 41 million iButtons are
currently in circulation. List of the major users include the U.S. Post Office, entire truck fleet
fitted with iButtons that track vehicle maintenance; Citizens of Istanbul, Turkey, who store
digital cash in the iButton, using the device as a small change purse on their mass transit system.
it was also said that the U.S. Postal service has approved the cryptographic iButton as a Postal

14
Security Device to be used in its PC Postage program that allows individuals to download
postage off the Internet and print it from their own
Printers Since their introduction, iButton memory devices have been deployed in vast quantities
as rugged portable data carriers, often in harsh environmental conditions.

Among the large-scale uses are as transit fare carriers in Istanbul, Turkey; as maintenance
record carriers on the sides of Ryder trucks; and as mailbox identifiers inside the mail
compartments of the U.S. Postal Service's outdoor mailboxes. They are worn as earrings by cows
in Canada to hold vaccination records, and they are used by agricultural workers in many areas
as rugged substitutes for timecards. The iButton product line and its many applications are
described at Dallas Semiconductor's iButton Web site, which is listed in the Resources section.
Every iButton product is manufactured with a unique 8-byte serial number and carries a
guarantee that no two parts will ever have the same number. Among the simplest iButtons are
memory devices that can hold files and subdirectories and can be read and written like small
floppy disks. In addition to these, there are iButtons with password-protected file areas for
security applications, iButtons that count the number of times they have been rewritten for
securing financial transactions, iButtons with temperature sensors, iButtons with continuously
running date/time clocks, and even iButtons containing powerful microprocessors. Information is
transferred between iButton and a PC with a momentary contact, at up to 142K bits per second.
To do that one presses iButton to the Blue Dot receptor, a $15 pipeline into PC. The Blue Dot
sticks to any convenient spot on the front of a PC and is cabled to the serial or parallel port in the
back. According to the Dallas Superconductor's information, over 41 million iButtons are
currently in circulation. List of the major users include the U.S. Post Office, entire truck fleet
fitted with iButtons that track vehicle maintenance; Citizens of Istanbul, Turkey, who store
digital cash in the iButton, using the device as a small change purse on their mass transit system.
it was also said that the U.S. Postal service has approved the cryptographic iButton as a Postal
Security Device to be used in its PC Postage program that allows individuals to download
postage off the Internet and print it from.

15
SECURITY

The java ring provides very high degree of security for the confidential data that is stored
in the NVRAM memory. The barrier substrate and the triple layer technique effectively deny
access the unauthorized access to the NVRAM confidential data. In the worst case if any
unauthorized access penetrates the barrier the security processor detects it and immediately the
data which is written in the NVRAM. The Crypto iButton hardware platform offers a unique set
of special features expressly designed to prevent private keys and other confidential information
from becoming available to hackers.

Figure shows a detail of the internal construction of the Crypto iButton. The silicon die
containing the processor, ROM, and NVRAM memory is metallurgically bonded to the barrier
substrate through which all electrical contacts are made. This barrier substrate and the triple-
layer metal construction techniques employed in the silicon fabrication effectively deny access to
the data stored in the NVRAM. If any attempt is made to penetrate these barriers, the NVRAM
data is immediately erased. This construction technique and the use of NVRAM for the storage
of private keys and other confidential data provides a much higher degree of data security than
that afforded by EEPROM memory. The fact that the communication path between the Crypto
iButton and the outside world is limited to a single data line provides additional security against
hardware attacks by limiting the range of signals accessible to the hacker. In addition, the
processor itself is driven by an unstabilized ring oscillator operating over a range of 10 to 20
megahertz, so that the clock frequency of the processor is not constant and cannot be determined
by external means. This differs from the design of alternative devices in which the processor
clock signal is injected by the reader and is therefore exactly determined by the host processor.
xternal control of the clock provides a valuable tool to hackers, since they can repetitively cycle
such a processor to the same point in its execution simply by applying the same number of clock
cycles. Control of the clock also affords a means to induce a calculation error and thereby obtain
Information that can ultimately reveal secret encryption keys. A 32-kilohertz crystal oscillator is

16
used in the Java iButton to operate the time-of-day clock at a constant and well-controlled
frequency that is independent of the processor clock.

SECURITY THROUGH JAVA RING IN CAR

Figure : how java ring is used in security of car.

The Sun concept car's security is based on a Java ring that contains a profile of the user.
You connect the Java ring to a ring receptor in the car, and the car knows, based on your profile,
what you are allowed to do. For example, a ring given to a mechanic or valet allows that person
to see the dashboard and drive 40 miles per hour within a one block radius, but no faster or
farther. In a family where both the husband and wife drive the car, each has individualized
settings, so that when they enter the car, their environments are configured to the profiles on their
rings. Java rings are authorized through Personal Identification Numbers (PINs) so that no one
can steal a person's ring and run off with the car.

Sun representatives are also talking to automakers who are developing automated rental
cars. In this potential market, a driver can use his or her ring to access a vehicle and simply leave
it when done. The net result is a very inexpensive rental car for local use by residents and
tourists. This will create a new business for rental car companies competing for business
travelers in the saturated airport rental car market.

17
4. ADVANTAGES
- very easy and convenient way for users.

-More secure than using passwords.

-Portable.

-Ruggedness.

-Wearable.

-Provides authentication to users which is crucial for many applications.

-Easier for administrator to maintain the security infrastructure.

-Provides real memory, more power, and a capacity for dynamic programming

DISADVANTAGES
-Parents and teachers will have less control over children and students

-Loss of privacy

18
 5. CONCLUSION

Java ring is highly durable because of its rugged and secure stainless packing. It is used
in personal computing. Dallas Semiconductor has produced more than 20 million physically-
secure memories and computers with hard-shell packaging optimized for personal possession.
The Java iButton, therefore, is simply the latest and most complex descendant of a long line of
products that have proven they to be highly successful in the marketplace. With its stainless steel
armor, it offers the most durable packaging for a class of products that likely will suffer heavy
use and abuse as personal possessions. The iButton form factor permits attachment to a wide
variety of personal accessories that includes rings, watchbands, key fobs, wallets, bracelets, and
necklaces, so the user can select a variation that suits his or her lifestyle.

19
6.REFERENCES

⮚ http://www.javaworld.com
⮚ http://www.electronics.howstuffworks.com
⮚ http://www.people.uchicago.ed.
⮚ http://www.google.com.
⮚ http://www.mindprod.com/jgloss/javaring.html
⮚ http://www.useit.com/papers/javaring.html

20