New Viking 3, TM

the innovation
Screw or automatic spring connection
EX 29026

A NEW RANGE,
BORN OF RESEARCH & EXPERIENCE

ce

EX29026_01-07 - page 2 Wednesday, February 11, 2009 4:03:34 PM

 INDEX
Screw connection ..................................... 2

Automatic spring connection ......................... 4

Common accessories ................................. 6

Catalogue pages ...................................... 8

Selection table ..................................... 8

Viking 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CAB 3 marking and isolating sleeves . . . . . . . . . . . . . . . 26

CAB 3 marking system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Starfix ferrules and crimping tools . . . . . . . . . . . . . . . . . 30

EX29026_01-07 - page 3 Wednesday, February 11, 2009 4:03:34 PM

 ng er na oc a mar ng sys m

... 2

... 4

... 6 For over 30 years, Legrand Viking 3 terminal blocks are

the core of a reliable and easy
has produced Viking 3
screw terminal blocks in to use connection system,
its Normandy factories for toghether with CAB 3 marking
... 8 system and Starfix ferrules
the whole world. Millions of
wiring installers have used and crimping tools.
the different generations.
... 8
They are constantly providing
ideas for improvement
which today make them a
. . . 14
benchmark in the connection
field.
. . . 26

. . . 27

. . . 30

Viking 3 tterminal
Viki mi l bl
blocks
ks and
nd their CAB 3 marking
ki system
te

EX29026_01-07 - page 4 Wednesday, February 11, 2009 4:03:34 PM

 NEW VIKING 3, THE INNOVATION
TM

Strength and security: screw

High contact pressure
using the clamp/bar Captive screw
system The oth

Optimize
and stand
bring com
range and
and mark

Excellent
mechanical Clamping tried and
strength tested for strength,
with a specially pulling-out,
selected clamp destructive
made of surface- torque resistance
treated steel (1) and ageing

Perfect electrical
conduction with the tinned Permissible cross-sections:
brass bar (1) 0.25 mm2 to 70 mm2
(flexible wire) and 0.25 mm2
to 95 mm2 (rigid wire)

(1) Complies with RoHS (Restriction of Hazardous Substances) requirements

International approvals:
UL/CSA/NF/VDE/IMQ/BV
CSA
ATEX certification
Recognized (Canada)
(Etats-Unis)

Direct screwless
rail for protectio
Conforms to IEC EN 60947-7-1, (for pitches of 5
IEC EN 60947-7-2 and IEC EN 60947-7-3

EX29026_01-07 - page 5 Wednesday, February 11, 2009 4:03:34 PM

 oen ca
mm or s mm

screw connexion

rew
The other innovations

Optimized size, simplified fixing

and standardized end caps systems
bring comfort of use for the new Viking 3
range and make installation, connection
and marking easyer than ever.

ping tried and

d for strength,
g-out,
uctive
e resistance
geing Identical
Id ti l height for
f blocks
block of 16 mm2 tto 70 mm2

ections:

25 mm2
)

Direct screwless fixing on Single end caps for pitches of 5 to 10

rail for protection conductor modules
(for pitches of 5 to 10)
947-7-3

EX29026_01-07 - page 6 Wednesday, February 11, 2009 4:03:34 PM

 NEW VIKING 3, THE INNOVATION
TM

Reliability and time saving: auto

No tool required for
connection:
Direct insertion (1) up With or The oth
to pitch of 6. without ferrule
Disconnection with
screwdriver Actively l
resulted in
Developme
an innovati
terminal b
Constant above conn
contact advantages
pressure

Double central
marking area

Better management
of wires
with the inclined
cable entries
Permissible cross-sections:
0. 5 mm2 to 16 mm2

(1) For a flexible wire with no ferrule, the spring is opened using a screwdriver

International approvals:
UL/CSA/NF/VDE/IMQ/BV
CSA
ATEX certification
Recognized (Canada)
(Etats-Unis)

Bridging combs a

Conforms to IEC EN 60947-7-1,

IEC EN 60947-7-2 and IEC EN 60947-7-3

EX29026_01-07 - page 7 Wednesday, February 11, 2009 4:03:34 PM

ving: automatic spring connection

r The other innovations

ut ferrule

Actively listening to installers has

resulted in Legrand's Research &
Development department creating
an innovative new Viking 3 spring
terminal block which, over and
above connection quality, has many
advantages.

Double central
marking area
Integrated end caps for pitches of 6 to 12

oss-sections: Pas de 5
mm2

Pas de 6

Bridging combs and markings are perfectly visible Optimized terminal block size. Identical electrical characteristics
for blocks with a pitch of 5 and those with a pitch of 6 (one block
1, gained every 5 blocks with a pitch of 5)
60947-7-3

EX29026_01-07 - page 8 Wednesday, February 11, 2009 4:03:34 PM

 NEW VIKING 3 TM

Screw or automatic spring:

more convenient wiring and easier use thanks

End stop: screwless fixing Managing cable shielding

accessories

Automatic-insertion bridging comb up to pitch of 8, 2 areas Blown fuse indicator can be added at the last moment Possibility of either manua
allowing pitch jumps (12/48 V or 110/250 V)

EX29026_01-07 - page 9 Wednesday, February 11, 2009 4:03:34 PM

ring:
se thanks to common accessories.

Managing cable shielding with dedicated Addition of functions on module for equipping: standard, neutral or
accessories protected isolation, mini-circuit-breaker, automotive-type fuse, etc.

he last moment Possibility of either manual marking (CAB 3)… …and computerized (Logicab 2)

EX29026_01-07 - page 10 Wednesday, February 11, 2009 4:03:34 PM

 VIKING EP0

VikingTM 3 terminal blocks with screw connection and accessories NEW

for copper cable

CSA VDE IMQ

Recognized (Canada) (Allemagne) (Italie)
(Etats-Unis) TERMINAL BLOCK
ELECTRICAL
FUNCTION Nominal

Colour
Pitch
cross-section Ca
(mm)
(mm2)
37
37
2.5 5
37
37
37
37
371 61 371 63 371 64
4 6 37
37
37
1 connection - 1 entry/1 outlet 37
6 8 37
37
37
371 66 371 69 371 68 Connecting 10 10
37
(p. 14)
37
16 12
37
37
35 15
37
70 22 37
371 00 371 08
37
1 connection - 2 entries/2 outlets 4 6
37
37
2.5 5
37
2 connections on 2 levels
37
4 6
37
371 20 371 30 3 connections on 3 levels 2.5 5 37
2.5 5 37
4 6 37
6 8 37
1 connection - 1 entry/1 outlet - metal base 10 10 37
371 71 371 76 For protection 16 12 37
conductor 35 15 37
(p. 14) 35 15 37
4 6 37
1 connection - 1 entry/1 outlet - plastic base(1)
6 8 37
371 78 371 79
1 connection - 2 entries/2 outlets - metal base 4 6 37

Open (to be equipped) 37

For fuse cartridge 5 x 20 with handle lever 37
371
For fuse cartridge 5 x 20 with handle lever
3
+ blown fuse indicator
24
371 84 N
2.5 6
371 80 371 81 For neutral circuit with handle lever 37
Disconnect
1 connection With handle lever 37
(p. 15)
For standard circuit
With mini lever 37
For circuit not With handle lever 37
broken With mini lever 37
For fuse cartridge 5 x 20 with screwed plug 37
10 12
371 86 371 87 For fuse cartridge 6.3 x 32 with screwed plug 37
Modular 37
1 connection 2.5 5
Diode carrier 1N4007 37
Function
blocks (p. 15) Diode carrier 1N4007 37
2 connections
4 6
on 2 levels
371 53 371 56
With voltage presence LED 37

For sensor Sensor 37

and actuator 3 connections
(p. 15) Actuator 2.5 5
on 3 levels
BAT 37
Date: PNE (p. 14) Phase/Neutral/Earth
Nom RMP: Measurement
1 connection Disconnect for measuring circuit 4 8 37
V. Desmons 371 51 371 52 371 92 (p. 15)
H. Bosselin (1) Can be used for protection conductor inside class II equivalent assemblies (4) Upper level
(2) Blown fuse indicator 12/24/48 V = /A Cat.No 375 24 or 110/250 VA Cat.No 375 25 (5) Lower level only
Nom Chef de Pub: (3) Or end stop Cat.No 375 10 (6) Lower and intermediate levels
P. PERICLE Red catalogue numbers: New products
Signature : 8

EX29026_08-13 - page 1 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

ailable
( p. 1 2-13) av t
ge las
Old ranwhile stocks

MEASURE- ASSOCIATED
TERMINAL BLOCK INSULATION EQUIPOTENTIAL LINK PROTECTION MENT PRODUCTS
ELECTRICAL
FUNCTION Nominal Separation Comb for Comb for Comb for Comb for Bar for Single Cut to
Colour

Pitch Test
cross-section Cat.Nos End cap and insulation 2 blocks, 3 blocks, 10 blocks, 12 blocks, 12 blocks, pole length
(mm) socket
(mm2) divider auto. front auto. front auto. front side front screen screen
371 60
371 00
2.5 5 375 50(3) 375 60 375 02 375 01 375 65 375 68 375 27
371 20
371 30 End stops
(p. 18)
371 61
371 01
4 6 371 21 375 50(3) 375 60 375 05 375 04 375 65 375 68 375 27
371 31
371 77
371 62
6 8 371 02 375 50(3) 375 60 375 08 375 07 375 66 375 68 375 27
371 78 Label holder
for end stop
371 63 (p. 18)
10 10 375 50(3) 375 60 375 40 375 66 375 68 375 75
371 03
371 64
16 12 375 51 375 61 375 42 375 67 375 69 375 76
371 04
371 65
35 15 375 51 375 61 375 44 375 67 375 69 375 76
371 05
70 22 371 66 built-in Handle lever
371 69 mini lever
4 6 375 52 375 62 375 05 375 04 375 27 (p. 19)
371 09
371 67
2.5 5 375 53 375 63 375 02 375 01 375 27(4)
371 07
371 68
4 6 375 53 375 63 375 05 375 04 375 27(4)
371 08
375 46 (6)
2.5 5 371 51 375 54 375 54 375 02(4) 375 01(4) 375 27(4)
375 47 (6)
2.5 5 371 70
4 6 371 71 Joining rods
375 50(3) for disconnect
6 8 371 72 blocks
10 10 371 73 (p. 19)
16 12 371 74
375 51
35 15 371 75
35 15 371 76
4 6 371 77 375 50(3) 375 60 375 05 375 04 375 65 375 68
6 8 371 78 375 50(3) 375 60 375 08 375 07 375 66 375 68

4 6 371 79 375 52 Blown fuse

indicators
371 80 375 55 375 62 375 05 375 04 375 27 (p. 19)
dle lever 371 81
371 81 +
dle lever
375
24/25(2) 375 55 375 62 375 05 375 04
N
2.5 6
ver 371 82
lever 371 83 Shielding
er 371 84 375 55 375 62 375 05 375 04 375 27 (p. 19)
lever 371 85 375 55 375 62 375 05 375 04
er 371 86 375 55 375 62 375 05 375 04 375 27
wed plug 371 87
10 12 375 56 CAB 3
ewed plug 371 88 (p. 27)

371 53
2.5 5 375 55 375 02 375 01 375 27
371 54

371 55 375 53 375 63 375 05 375 04 375 27(4)

4 6
371 56 375 53 375 63 375 05(5) 375 04(5)

371 51
375 46 (6)
2.5 5 375 54 375 54 375 02(4) 375 01(4) 375 27(4)
375 47 (6)
371 52 BAT
Date:
Nom RMP:
4 8 371 92 375 57 375 77
V. Desmons
H. Bosselin
Nom Chef de Pub:
Red catalogue numbers: New products P. PERICLE
9 Signature :

EX29026_08-13 - page 2 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

VikingTM 3 terminal blocks with spring connection and accessories NEW

for copper cable

CSA VDE IMQ

Recognized (Canada) (Allemagne) (Italie)
(Etats-Unis) TERMINAL BLO
ELECTRICAL
FUNCTION Nominal
Pitch
cross-section
(mm)
(mm2)

4 5

372 60 372 61
4 6

1 connection - 2 wires - 1 entry/1 outlet

6 8

372 64 372 40 10 10

16 12

Connecting
(p. 16)
4 5
372 69 372 68 1 connection - 3 wires - 1 entry/2 outlets

4 6

4 5

372 47
1 connection - 4 wires - 2 entries/2 outlets
372 02
4 6

4 5
2 connections - 4 wires - 2 levels
372 21 372 42 4 6

4 5
4 6
1 connection - 2 wires - 1 entry/1 outlet - metal
6 8
base
372 70 372 71 10 10
For protection
conductor 16 12
(p. 16)
1 connection - 3 wires - 1 entry/2 outlets - metal 4 5
base 4 6

1 connection - 4 wires - 2 entries/2 outlets - metal 4 5

372 72 372 12 base 4 6

Open (to be equipped)

For fuse cartridge 5 x 20 with

handle lever

For fuse cartridge 5 x 20 with

372 80 372 82 handle lever + blown fuse indicator
Disconnect 1 connection
2.5 6
(p. 17) 2 wires For neutral circuit N
with handle lever
For standard With handle lever
circuit With mini lever

For circuit With handle lever

372 83 372 84 not broken With mini lever
1 connection
4 wires Diode carrier 1N4007
2 entries/2 outlets
Function
BAT blocks Diode carrier 1N4007 4 5
Date: 2 connections
(p. 17)
4 wires
Nom RMP: 2 levels
372 54 With voltage presence LED
V. Desmons
H. Bosselin (1) Blown fuse indicator 12/24/48V= /A Cat.No 375 24 or 110/250VA Cat.No 375 25 (3) Upper level only
Nom Chef de Pub: (2) Lower level only

P. PERICLE Red catalogue numbers: New products

Signature : 10

EX29026_08-13 - page 3 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

ailable
( p. 1 2-13) av t
ge las
Old ranwhile stocks

ASSOCIATED
TERMINAL BLOCK INSULATION EQUIPOTENTIAL LINK MEASUREMENT PRODUCTS
ELECTRICAL
FUNCTION Nominal
Colour
Pitch Separation and Comb for 2 Comb for 3 Comb for 10
cross-section Cat.Nos End cap Test socket
(mm) insulation divider blocks blocks blocks
(mm2)
372 60
4 5 372 00 375 86 375 95 375 02 375 01 375 27
372 20 End stops
(p. 18)
372 61
4 6 372 01 built-in 375 95 375 05 375 04 375 27
372 21
372 62
6 8 built-in 375 08 375 07 375 27
372 02
372 63 Label holder
10 10 built-in 375 82 for end stop
372 03 (p. 18)
372 64
16 12 built-in 375 85
372 04
372 40
4 5 372 41 375 87 375 95 375 02 375 01 375 27
Handle lever
372 42 mini lever
(p. 19)
372 43
4 6 built-in 375 95 375 05 375 04 375 27
372 44
372 46
4 5 375 88 375 95 375 02 375 01 375 27
372 47
372 69
4 6 built-in 375 05 375 04 375 27
372 09
372 67 Joining rods
4 5 375 89 375 96 375 02 375 01 375 27(3) for disconnect
372 07 blocks
(p. 19)
372 68
4 6 built-in 375 96 375 05 375 04 375 27(3)
372 08
4 5 372 70 375 86
4 6 372 71
6 8 372 72
built-in
10 10 372 73
Blown fuse
16 12 372 74 indicators
(p. 19)
l 4 5 372 10 375 87
4 6 372 11 built-in

tal 4 5 372 12 375 88

4 6 372 79 built-in

372 80 375 90 375 05 375 04 375 27 Shielding

(p. 19)
with
372 81

372 81
with
+ 375
indicator 375 90 375 05 375 04 CAB 3
24/25 (1) (p. 27)
2.5 6
N 372 82

e lever 372 83
er 372 84 375 90 375 05 375 04 375 27
e lever 372 85 375 90 375 05 375 04
er 372 86 375 90 375 05 375 04 375 27

372 54 375 88 375 95 375 02 375 01

4 5 372 55 375 89 375 96 375 02 375 01 BAT

Date:
Nom RMP:
D 372 56 375 89 375 96 375 02(2) 375 01(2)
V. Desmons
H. Bosselin
Nom Chef de Pub:
Red catalogue numbers: New products P. PERICLE
11 Signature :

EX29026_08-13 - page 4 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

VikingTM 3 power terminal blocks old range: Vik

and equivalences be

SPRING CONNECTION
INSULATION EQUIPOTENTIAL PROTECTION ASSOCIATED
CSA
Recognized (Canada) TERMINAL BLOCK
(Etats-Unis) LINK PRODUCTS CSA
ELECTRICAL Cat.Nos
Recognized (Canada) GOST

FUNCTION Max. Separation (Etats-Unis)

(Russie)

Pitch Cover Cover

connection Rail Rail and insulation Shunt
(mm) 4 blocks 3 blocks
(mm2) 3 1 divider
CAB 3
42 390 10 394 46 (p. 27)
Cable - cable
55 390 11 394 47
36 390 13 394 46
Cable lug
390 11 42 390 14 394 46
- Cable lug
55 390 15 394 47
Power 42 390 17 394 46 1 connec
Cable lug -
terminal Cable Standard
blocks 55 390 18 394 47
(p. 24) 42 390 20 394 46
Cable -
390 21 Cable lug 55 390 21 394 47
35 26 390 71(1) 390 31 394 77 394 88
2 connec
For busbars 70 34 390 72(1) 390 32 394 78 394 86 2 levels
or eyelets 120 34 390 73(1) 390 33 394 78 394 86
390 14 240 46 390 74(1) 390 34 394 78 394 89 394 86

(1) Available March 2009

hile 1 connec
old range: VikingTM 3 terminal blocks and accessories able w
range avail st For neutral
Old stocks la
and equivalences between old/new range conductor

CSA
SCREW CONNECTIONCSA
Recognized (Canada) ÖVE GOST SCREW CONNECTION
Recognized (Canada) (CONTINUED)
ÖVE GOST
2 connec
(Autriche) (Russie) (Autriche)
(Russie)
(Etats-Unis)
(Etats-Unis)
TERMINAL BLOCKS TERMINAL BLOCKS 2 levels

Pitch (mm)

(old range)
Pitch (mm)

(old range)

capacity
capacity

Nominal

Cat.Nos

Cat.Nos
Nominal

Cat.Nos

Cat.Nos

range)
range)

(mm2)
(mm2)

(new
(new

Disconnect 1 connec

2.5 5 390 60 371 60 2.5 5 393 00 371 00

4 6 390 61 371 61 4 6 393 01 371 01
Diode carrier 1 connec
6 8 390 62 371 62 6 8 393 02 371 02
For neutral 1 connection
1 connection 10 10 390 64 371 63 10 10 393 03 371 03
conductor
16 12 390 66 371 64 16 12 393 04 371 04
Standard 35 15 390 68 371 65 35 15 393 05 371 05
70 22 390 70 371 66 2 connections - 2 levels 4 6 393 07 371 08
1 connection - 1 ent. - 2 out. 4 6 390 82 371 69 2.5 5 393 37 371 20 For 1 connec
For circuit 1 connection protection
2.5 5 390 77 371 67 4 6 393 39 371 21
not broken conductor
2 connections - 2 levels 1 disconnect connection 4 6 393 38 371 85
4 6 390 78 371 68
3 connections - 3 levels 2.5 5 390 51 371 51 For sensor/ Sensor/power supply unit 2.5 5 390 51 371 51
actuator 3 connections Actuator/power supply unit
2.5 5 390 00 - 3 levels 2.5 5 390 52 371 52
4 6 390 01 - PNE Phase/Neutral/Earth 2 connec
1 connection - red 2.5 5 393 29 371 30 2 levels
6 8 390 02 -
V.O. - UL 94 1 connection
10 10 390 04 - 1 connection - red 4 6 393 30 371 31
END STOPS
16 12 390 06 - 1 connection - white 2.5 5 393 31 -
35 15 390 08 - For special 1 connection - white 4 6 393 32 -
Shunted 4 6 390 76 371 69 circuits 1 connection - brown 2.5 5 393 33 -
1 connection - brown 4 6 393 34 - 12 pitch end stop, tri-rail
Function 2 connections Diode carrier 4 6 390 80 371 55
blocks 2 levels 1 connection - purple 2.5 5 393 35 - 8 pitch end stop, rail 1
With voltage
4 6 390 81 371 56 1 connection - purple 4 6 393 36 -
presence LED 8 pitch end stop, rail 2
2.5 5 393 70 371 70 10 pitch high end stop
Blade type 4 6 390 84 371 84
4 6 393 71 371 71
Neutral 10 pitch end stop, bar su
4 8 390 85 371 82 6 8 393 72 371 72
equipped 1 connection - Metal base
10 10 393 74 371 73
10 12 390 83 371 87
1 connection For 16 12 393 76 371 74
For cartridge 4 8 390 86
371 81
Disconnect protection 35 15 393 78 371 75
5 x 20
371 81 + conductor
4 8 390 87 (1)
2 connections - 2 levels - Metal base 4 6 393 73 371 79
375 25
4 6 393 81 371 77
BAT For cartridge
10 12 390 89 371 88 1 connection - Plastic base
Date: 6.3 x 32 6 8 393 82 371 78
Nom RMP: 2 connections For cartridge
4 8 390 88 -
1 connection - Metal base - bare
35 15 393 96 371 76
2 levels 5 x 20 terminal
V. Desmons
H. Bosselin (1) With blown fuse indicator (neon bulb 230 VA)
Nom Chef de Pub:
P. PERICLE Red catalogue numbers: New products
Signature : 12

EX29026_08-13 - page 5 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

e
le whil
Availabks last
old range: Viking 3 terminal blocks and accessories
TM
stoc
and equivalences between old/new range (continued)

SPRING CONNECTION
CTION ASSOCIATED SCREW CONNECTION ACCESSORIES
PRODUCTS CSA
Recognized (Canada) GOST TERMINAL BLOCKS Cat.Nos End cap Cat.Nos Equipotential bridging comb
(Russie) (continued)

Pitch (mm)
(Etats-Unis)

(old range)
Cover 394 50 Block with 1 connection - pitch 5-6

capacity
Nominal

Cat.Nos

Cat.Nos
394 41 Pitch 5 - 3 blocks

range)
(mm2)
3 blocks

(new
394 51 Block with 1 connection - pitch 8-10
CAB 3 394 44 Pitch 6 - 3 blocks
(p. 27) 394 52 Block with 1 connection - pitch 12-15
394 22 Sens./act. - pitch 5 - blue - 12 blocks
394 82 Block with 1 connection 1 ent./2 out.
2.5 5 396 01 372 60 - pitch 6 394 23 Sens./act. - pitch 5 - brown - 12 blocks
4 6 396 04 372 61 394 55 Block with 2 connections - pitch 5-6
394 26 Sens./act. - pitch 5 - green - 12 blocks
394 53 Sensor/actuator
2 wires 6 8 396 05 372 62 block - 3 connections
Cat.Nos 390 51/52 Equipotential bridging bar
10 10 396 06 372 63 Block with
394 73 - pitch 5-6 1 connection V.O. - UL 94 394 10 Insulated - pitch 5 - 12 blocks
1 connection 16 12 396 07 372 64
394 74 Block with 1 connection V.O. - UL 94 394 11 Insulated - pitch 6 - 12 blocks
Standard 3 wires 2.5 5 396 02 372 40 - pitch 8-10
394 12 Insulated - pitch 8 - 12 blocks
394 75 - pitchwith
Block 1 connection V.O. - UL 94
1 ent. - 2 out. 4 6 396 08 372 43 12-15
394 34 Insulated - pitch 5 - 2 blocks
393 49 Disconnect
4 wires block - 1 connection
2.5 5 396 03 372 46 Cat.Nos 390 85/86/87
1 ent. - 3 out. Disconnect block - 1 connection
394 37 Insulated - pitch 6 - 2 blocks
394 83 Cat.No 390 83
2 connections 1.5 5 396 27 372 67 394 35 Insulated - pitch 5 - 3 blocks
4 wires 393 48 Disconnect block - 2 connections
2 levels 4 6 396 36 372 68 Cat.No 390 88 394 38 Insulated - pitch 6 - 3 blocks
2.5 5 396 11 372 00 393 09 Neutral block - 1 connection - pitch 5-6 394 13 Bare - pitch 10 - 12 blocks
394 86 393 11 Neutral block - 1 connection - pitch 8-10
4 6 396 14 372 01 394 14 Bare - pitch 12 - 12 blocks
2 wires 6 8 396 15 372 02 393 13 Neutral block - 1 connection - pitch 12-15
394 15 Bare - pitch 15 - 12 blocks
10 10 396 16 372 03 393 15 Neutral block - 2 connections - pitch 5-6
394 16 Bare - pitch 10 - 12 blocks - low spacer
393 46 Block
1 connection for circuit not broken -
16 12 396 17 372 04 1 connection Cat.Nos 393 37/39
For neutral 394 17 Bare - pitch 12 - 12 blocks - low spacer
conductor 3 wires 2.5 5 396 12 372 41 Block for circuit not broken -
393 45 1 connection Cat.No 393 38 394 18 Bare - pitch 15 - 12 blocks - low spacer
1 ent. - 2 out. 4 6 396 18 372 44
393 84 Block for cond. protection -
2 connections Cat.No 393 73 Protective screen
4 wires
2.5 5 396 13 372 47
393 87 Block for cond. protection -
394 92 Single
1 ent. - 3 out. pole for block with 1 connection
1 connection Cat.No 393 81 - pitch 5-6
393 88 Block for cond. protection -
394 93 Single
2 connections pole for block with 1 connection
4 wires 4 6 396 46 372 08 1 connection Cat.No 393 82 - pitch 8-10
TERMINAL BLOCKS 2 levels
Separation/insulation divider 394 94 Single pole for block with 1 connection
Pitch (mm)

(old range)

- pitch 12-15
capacity
Nominal

Blade
Cat.Nos

Cat.Nos

394 66 Block with 1 connection pitch 5-6-8-10

range)
(mm2)

4 6 396 28 372 84
(new

type and disconnect pitch 6 Cut to length - pitch 5-6-8-10

394 80 (on Cat.No 394 66)
Disconnect 1 connection 2 wires for 394 69 Block with 2 connections pitch 5-6
394 81 Cut to length - pitch 12-15
396 40 (on Cat.No 394 67)
394 67 Block
cartridge 4 6 372 81 with 1 connection pitch 12-15
2.5 5 393 00 371 00 /41 and disconnect pitch 8
Miscellaneous
5 x 20
4 6 393 01 371 01 394 53 Block with 3 connections pitch 5 Screening continuity bracket for
Diode carrier 1 connection 4 wires 2.5 5 396 42 372 54 394 05 1 connection blocks - pitch 5-6-8-10
6 8 393 02 371 02 394 72 Separation barriers for bars for block
2.5 5 396 21 372 70 with 1 connection - pitch 5-6-8-10-12-15 Protection cap for separable combs/
10 10 393 03 371 03 394 95 bars - pitch 5-6
Equipotential bridging comb
16 12 393 04 371 04 4 6 396 24 372 71
394 31 Pitch 5 - 12 blocks 394 06 Joining rod for 2 disconnect blocks
35 15 393 05 371 05 2 wires 6 8 396 25 372 72
394 20 Pitch 6 - 12 blocks 394 07 Joining rod for 3 disconnect blocks
4 6 393 07 371 08 10 10 396 26 372 73
394 21 Pitch 8 - 12 blocks 394 08 Joining rod for 4 disconnect blocks
2.5 5 393 37 371 20 For 1 connection 16 12 396 29 372 74
protection 394 40 Pitch 5 - 2 blocks 394 24 Test socket for block pitch 5-6-8-10
4 6 393 39 371 21 3 wires 2.5 5 396 22 372 10
conductor 1 ent. - 2 out. 394 43 Pitch 6 - 2 blocks 394 25 Test socket for block pitch 12-15
4 6 393 38 371 85 4 6 396 30 372 11
2.5 5 390 51 371 51 4 wires
2.5 5 396 23 372 12 SPRING CONNECTION ACCESSORIES
1 ent. - 3 out.
2.5 5 390 52 371 52 Cat.Nos End cap Cat.Nos Separation/insulation divider
2 connections
2 levels 4 wires 4 6 396 66 372 79 396 31 Std term. block - 2 wires - pitch 5-6 396 49 Block with 2 wires - pitch 5-6
2.5 5 393 29 371 30
4 6 393 30 371 31 396 32 Std term. block - 3 wires - pitch 5 396 50 Block with 3 wires - pitch 5
END STOPS
2.5 5 393 31 - 396 77 Std term. block - 3 wires - pitch 6 396 80 Block with 3 wires - pitch 6
4 6 393 32 - Cat.Nos Cat.Nos 396 33 Std/diode term. block - 4 wires - pitch 5
(old range) (new range) 396 51 Block with 4 wires - pitch 5
2.5 5 393 33 -
396 53 Block
396 48 Std term. block - 4 wires - 2 levels - pitch 5 with 4 wires - 2 levels -
4 6 393 34 - 12 pitch end stop, tri-rail 394 00 375 13 pitch 5
396 85 Std term. block - 4 wires - 2 levels - pitch 6
2.5 5 393 35 - 8 pitch end stop, rail 1 394 02 - 396 88 Block with 4 wires - 2 levels -
pitch 6
4 6 393 36 - 396 37 Neutral term. block - 2 wires - pitch 5-6
8 pitch end stop, rail 2 394 03 375 11 Equipotential bridging comb
2.5 5 393 70 371 70 10 pitch high end stop 394 04 -
396 38 Neutral term. block - 3 wires - pitch 5
396 58 Block - pitch 5 - 2 poles
4 6 393 71 371 71 396 78 Neutral term. block - 3 wires - pitch 6
10 pitch end stop, bar support 393 99 375 12 396 59 Block - pitch 5 - 3 poles
6 8 393 72 371 72 396 39 Neutral term. block - 4 wires - pitch 5
10 10 393 74 371 73 396 60 Block - pitch 5 - 10 poles
Neutral term. block - 4 wires - 2 levels -
396 86 pitch 6
16 12 393 76 371 74 396 61 Block - pitch 6 - 2 poles
35 15 393 78 371 75 396 47 Disconnect term. block - 2 wires - pitch 6
396 62 Block - pitch 6 - 3 poles
Protection cond. term. block - 2 wires -
4 6 393 73 371 79 396 43 pitch 5-6
396 63 Block - pitch 6 - 10 poles
4 6 393 81 371 77 Discover the new Viking 3 Protection cond. term. block - 3 wires -
396 76 pitch 5 396 75 Block - pitch 8 - 2 poles BAT
6 8 393 82 371 78 terminal blocks with screw Date:
Protection cond. term. block - 3 wires -
35 15 393 96 371 76 and spring connection 396 79 pitch 6 396 64 Block - pitch 10 - 2 poles
Nom RMP:
Protection cond. term. block - 4 wires -
396 45 pitch 5 396 65 Block - pitch 12 - 2 poles V. Desmons
see p. 14 Protection cond. term. block - 4 wires - H. Bosselin
396 87 2 levels - pitch 6
Nom Chef de Pub:
Red catalogue numbers: New products P. PERICLE
13 Signature :

EX29026_08-13 - page 6 Thursday, February 12, 2009 10:56:28 AM

 VIKING EP0

terminal blocks with screw connection VikingTM 3 NEW terminal bloc

371 60 + 371 00 + 371 20 + 371 30 371 69 371 68

371 80 + automotive-type fuse

371 70 on rail 4

371 74 371 76 371 79 371 60 + 371 61 + 371 62 + 371 63 + 371 64 371 55

+ 371 65 + 371 66

Technical characteristics (p. 20) Technical charact

Used to make the electrical connection between 2 rigid or flexible copper wires Used to make the electr
2 areas for bridging combs for alternating equipotential connection up to 8 pitch 2 areas for bridging com
For rails 2 depth 15 mm, 2 EN 60715 depth 7.5 mm and 15 mm For rails 2 depth 15 m

Pack Cat.Nos Connecting Pack Cat.Nos For protection conductor Pack Cat.Nos Dis
Grey for standard circuit, blue for neutral 1 connection - 1 entry/1 outlet - metal base Dis
conductor, orange for circuit not broken by Screwless fixing on rail up to 10 mm pitch leve
the master isolating device, red for special circuits PEN from 10 mm2 Op
(safety, protected, etc) Nominal Capacity
cross- Can
1 connection - 1 entry/1 outlet section Rigid wire Flexible circ
Nominal Capacity Colour (mm²) (mm2) wire (mm2) Pitch (mm) Cat
cross-section Rigid wire Flexible 60 371 70 Green/yellow 2.5 0.25 to 4 0.25 to 2.5 5
Colour (mm²) (mm2) wire (mm2) Pitch (mm)
60 371 60 Grey 50 371 71 Green/yellow 4 0.25 to 6 0.25 to 4 6
60 371 00 Blue 40 371 72 Green/yellow 6 0.5 to 10 0.25 to 6 8
2.5 0.25 to 4 0.25 to 2.5 5 30 371 73 Green/yellow 10 1.5 to 16 2.5 to 10 10 20 371 80
60 371 20 Orange
60 371 30 Red 10 371 74 Green/yellow 16 1.5 to 25 4 to 16 12
10 371 75 Green/yellow 35 2.5 to 50 4 to 35 15 For
50 371 61 Grey 20 371 81
50 371 01 Blue 1 connection - bare block - metal base
4 0.25 to 6 0.25 to 4 6 10 371 76 - 35 2.5 to 50 4 to 35 15 For
50 371 21 Orange
50 371 31 Red 20 371 82 Gr
1 connection - 2 entries/2 outlets -
40 371 62 Grey metal base For
6 0.5 to 10 0.25 to 6 8 Screwless fixing on rail 20 371 83
40 371 02 Blue
30 371 63 Grey 50 371 79 Green/yellow 4 0.25 to 6 0.25 to 4 6 For
10 1.5 to 16 2.5 to 10 10
30 371 03 Blue 1 connection - 1 entry/1 outlet - plastic base
20 371 84
20 371 64 Grey Can be used for protection conductor inside For
16 1.5 to 25 4 to 16 12
20 371 04 Blue class II equivalent assemblies Circ
20 371 65 Grey 50 371 77 Green 4 0.25 to 6 0.25 to 4 6 20 371 85 O
35 2.5 to 50 4 to 35 15
20 371 05 Blue 40 371 78 Green 6 0.5 to 10 0.25 to 6 8
For
10 371 66 (1)
Grey 70 25 to 95 16 to 70 22
PNE - Phase/Neutral/Earth Circ
1 connection - 2 entries/2 outlets
25 371 69 Grey 3 connections on 3 levels - metal base 20 371 86 O
4 0.25 to 6 0.25 to 4 6
25 371 09 Blue Green/yellow marking for the lower level For
2 connections on 2 levels Screwless fixing on rail 20 371 87
Nominal Capacity
60 371 67 Grey cross-section Rigid wire Flexible For
2.5 0.25 to 4 0.25 to 2.5 5
60 371 07 Blue Colour (mm²) (mm2) wire (mm2) Pitch (mm) 20 371 88
60 371 68 Grey
50 371 52 (2) Grey 2.5 0.25 to 4 0.25 to 2.5 5
4 0.25 to 6 0.25 to 4 6 Bla
60 371 08 Blue
3 connections on 3 levels fus
50 371 51(2) Grey 2.5 0.25 to 4 0.25 to 2.5 5

CAB 3 marking system

BAT
Date:
Nom RMP:
V. Desmons voir p. 27
H. Bosselin
(1) Built-in end cap
Nom Chef de Pub: (2) Rigid wire capacity: 2.5 mm2 max. with equipotential bridging comb
P. PERICLE Red catalogue numbers: New products
Signature : 14

EX29026_14-23 - page 1 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

terminal blocks with screw connection VikingTM 3 (continued) NEW

371 80 + automotive-type fuse 371 84 + 371 86 371 87 371 53

371 82 + 371 83 + 371 85

371 62 + 371 63 + 371 64 371 55 371 51 371 52 371 92

Technical characteristics (p. 20-21)

Used to make the electrical connection between 2 rigid or flexible copper wires
2 areas for bridging combs for alternating equipotential connection up to 8 pitch
For rails 2 depth 15 mm, 2 EN 60715 depth 7.5 mm and 15 mm

r Pack Cat.Nos Disconnect terminal blocks 1 connection Pack Cat.Nos Function blocks
let - metal base Disconnection by means of blade type lever, handle 1 connection - modular
10 mm pitch lever or mini lever (with tool) Component connected with screws
Open (to be equipped) Nominal Capacity
apacity cross-section Rigid wire Flexible Pitch
Can take a blade-type automotive fuse or a miniature Colour (mm²) (mm2) wire (mm2) (mm)
e Flexible circuit-breaker, or blade type levers 20 371 53 Grey 2.5 0.25 to 4 0.25 to 2.5 5
wire (mm2) Pitch (mm) Cat.Nos 375 15/16/17/18
4 0.25 to 2.5 5 Nominal Capacity 1 connection - diode carrier
6 0.25 to 4 6 cross- 20 371 54 Grey 2.5 0.25 to 4 0.25 to 2.5 5
section Rigid wire Flexible Pitch
0 0.25 to 6 8 Colour (mm²) (mm2) wire (mm2) (mm) 2 connections on 2 levels - diode carrier
6 2.5 to 10 10 20 371 80 Grey 2.5 0.25 to 2.5 0.25 to 2.5 6
5 4 to 16 12
60 371 55 Grey 4 0.25 to 6 0.25 to 4 6
0 4 to 35 15 For fuse cartridge 5 x 20 with handle lever 2 connections on 2 levels - with LED
20 371 81 Grey 2.5 0.25 to 2.5 0.25 to 2.5 6
metal base Voltage presence indicator (12/24V= et A)
0 4 to 35 15 For neutral circuit with blue handle lever 60 371 56 Grey 4 0.25 to 6 0.25 to 4 6
20 371 82 Grey/blue 2.5 0.25 to 2.5 0.25 to 2.5 6
utlets -
For standard circuit with handle lever For sensors and actuators
20 371 83 Grey 2.5 0.25 to 2.5 0.25 to 2.5 6 For connecting sensors (Cat.No 371 51) or actuators
6 0.25 to 4 6 For standard circuit with mini lever (Cat.No 371 52), and their shared power supply unit
20 371 84 Grey 2.5 0.25 to 2.5 0.25 to 2.5 6 using equipotential bridging comb Cat.Nos 375 46/47
et - plastic base (wiring principe p. 21)
onductor inside For circuit not broken with handle lever
s Circuit not broken by the master isolating device 3 connections on 3 levels - for sensor
Nominal Capacity
6 0.25 to 4 6 20 371 85 Orange 2.5 0.25 to 2.5 0.25 to 2.5 6 cross-section Rigid wire Flexible Pitch
0 0.25 to 6 8 Colour (mm²) (mm2) wire (mm2) (mm)
For circuit not broken with mini lever 50 371 51 (1)
Grey 2.5 0.25 to 4 0.25 to 2.5 5
th Circuit not broken by the master isolating device 3 connections on 3 levels - for actuator
metal base 20 371 86 Orange 2.5 0.25 to 2.5 0.25 to 2.5 6 Green/yellow marking for the lower level
lower level For cartridge 5 x 20 with screwed plug Metal base. Screwless fixing on rail
20 371 87 Grey 10 0.25 to 16 0.25 to 10 12
50 371 52 (1) Grey 2.5 0.25 to 4 0.25 to 2.5 5
Capacity
re Flexible For cartridge 6.3 x 32 with screwed plug Disconnect for measurement
wire (mm2) Pitch (mm) 20 371 88 Grey 10 0.25 to 16 0.25 to 10 12
4 0.25 to 2.5 5 1 connection
Blade type levers, joining rods and blown With its accessories, allows intervention
fuse indicators (p. 19) (measurements, maintenance, etc) on a current,
voltage and power measuring circuit by keeping the
current transformer secondary circuit closed
Nominal Capacity
ystem Colour
cross-section
(mm²)
Rigid wire
(mm2)
Flexible
wire (mm2) Pitch (mm)
25 371 92 Grey 4 0.25 to 4 0.25 to 4 8 BAT
New Starfix crimping tools Date:
Accessories (p. 18) Nom RMP:
27 V. Desmons
End stops (p. 18) H. Bosselin
voir p. 30
ith equipotential bridging comb (1) Rigid wire capacity: 2.5 mm² max with equipotential brigding comb Nom Chef de Pub:
Red catalogue numbers: New products P. PERICLE
15 Signature :

EX29026_14-23 - page 2 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

terminal blocks with spring connection VikingTM 3 NEW terminal bloc

372 60 + 372 00 + 372 20 372 01 372 21 372 63 372 40

372 80 with automotive-type fus

Automatic insertion of flexible 372 70 372 72 372 79

wire with ferrule cap or rigid Automatic fixing on rail 4
wire up to pitch of 6 mm

372 84

Technical characteristics (p. 22) Technical charact

Screwless connection system, stainless steel spring type Screwless connection s

Used to make the electrical connection between 2 rigid copper wires, or flexible copper wires with or without ferrules (p. 30) Used to make the electr
Direct tool-free insertion of a rigid wire or flexible wire with ferrule, up to 6 mm pitch Direct tool-free insertion
2 areas for bridging combs for alternating equipotential connection 2 areas for bridging com
For rails 2 depth 15 mm, 2 EN 60715 depth 7.5 mm and 15 mm For rails 2 depth 15 m

Pack Cat.Nos Connecting Pack Cat.Nos For protection conductor Pack Cat.Nos Dis
2w
Grey for standard circuit, blue for neutral conductor, Metal base
orange for circuit not broken by the master isolating Screwless fixing on rail Dis
device PEN from 10 mm2 leve
1 connection - 2 wires - 1 entry/1 outlet 1 connection - 2 wires - 1 entry/1 outlet Op
Capacity Capacity Can
Nominal Flexible Nominal Flexible circ
cross- Flexible wire with cross- Flexible wire with Cat
section Rigid wire wire ferrule Pitch section Rigid wire wire ferrule Pitch
Colour (mm²) (mm2) (mm2) (mm2) (mm) Colour (mm²) (mm2) (mm2) (mm2) (mm)
60 372 60 Grey 60 372 70 Green/ 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
60 372 00 Blue 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5 yellow
60 372 20 Orange 50 372 71 Green/
(1) Co
yellow 4 0.5 to 6 0.5 to 4 0.5 to 4 6 20 372 80 G
50 372 61(1) Grey
50 372 01(1) Blue 4 0.5 to 6 0.5 to 4 0.5 to 4 6 25 372 72 (1) Green/ For
6 0.5 to 6 0.5 to 6 0.5 to 6 8
50 372 21(1) Orange yellow 20 372 81 G
20 372 73 (1) Green/ 10 0.75 to 10 0.75 to 10 0.75 to 10 10
50 372 62 (1) Grey yellow For
6 0.5 to 6 0.5 to 6 0.5 to 6 8 20 372 82 Grey
50 372 02 (1) Blue 15 372 74 (1) Green/ 16 4 to 16 4 to 16 4 to 16 12 For
40 372 63 (1)
Grey yellow
10 0.75 to 10 0.75 to 10 0.75 to 10 10 20 372 83 G
40 372 03 (1) Blue 1 connection - 3 wires - 1 entry/2 outlets
10 372 64 (1)
Grey 40 372 10 Green/ For
16 4 to 16 4 to 16 4 to 16 12 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
10 372 04 (1) Blue yellow 20 372 84 G
30 372 11(1) Green/ For
1 connection - 3 wires - 1 entry/2 outlets yellow 4 0.5 to 6 0.5 to 4 0.5 to 4 6
60 372 40 Grey Circ
60 372 41 Blue 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5 1 connection - 4 wires - 2 entries/2 outlets 20 372 85 Ora
60 372 42 Orange 40 372 12 Green/ 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
yellow For
50 372 43 (1) Grey 30 372 79 (1)
Green/ Circ
4 0.5 to 6 0.5 to 4 0.5 to 4 6 4 0.5 to 6 0.5 to 4 0.5 to 4 6
50 372 44 (1) Blue yellow 20 372 86 Ora
1 connection - 4 wires - 2 entries/2 outlets
60 372 46 Grey Bla
4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
60 372 47 Blue fus
50 372 69 (1)
Grey
4 0.5 to 6 0.5 to 4 0.5 to 4 6
50 372 09 (1) Blue
2 connections - 4 wires - 2 levels
60 372 67 Grey
4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
60 372 07 Blue CAB 3 marking system
50 372 68 (1) Grey
4 0.5 to 6 0.5 to 4 0.5 to 4 6
BAT 50 372 08 (1) Blue
Date:
Nom RMP: voir p. 27
V. Desmons
H. Bosselin
Nom Chef de Pub: (1) Built-in end cap
P. PERICLE Red catalogue numbers: New products
Signature : 16

EX29026_14-23 - page 3 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

terminal blocks with spring connection VikingTM 3 (continued) NEW

372 80 with automotive-type fuse 372 81 open 372 81 with blown fuse 372 82 + 372 83 + 372 85
indicator (p. 19)

372 54
372 84

Technical characteristics (p. 22)

Screwless connection system, stainless steel spring type

Used to make the electrical connection between 2 rigid copper wires, or flexible copper wires with or without ferrules (p. 30)
Direct tool-free insertion of a rigid wire or flexible wire with ferrule, up to 6 mm pitch
2 areas for bridging combs for alternating equipotential connection
For rails 2 depth 15 mm, 2 EN 60715 depth 7.5 mm and 15 mm

r Pack Cat.Nos Disconnect terminal blocks 1 connection - Pack Cat.Nos Function blocks
2 wires
1 connection - 4 wires - 2 entries/2 outlets -
Disconnection by means of blade type lever, handle diode carrier
lever or mini lever (with tool) Capacity
Nominal Flexible
ntry/1 outlet Open (to be equipped) cross- Flexible wire with
Capacity Can take a blade-type automotive fuse or a miniature section Rigid wire wire ferrule Pitch
Flexible circuit-breaker, or blade type levers Colour (mm²) (mm2) (mm2) (mm2) (mm)
Flexible wire with Cat.Nos 375 15/16/17/18 60 372 54 Grey 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
wire ferrule Pitch Capacity
(mm2) (mm2) (mm)
Nominal Flexible
2 connections - 4 wires - 2 levels - diode carrier
0.5 to 4 0.5 to 2.5 5 cross- Flexible wire with 60 372 55 Grey 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
section Rigid wire wire ferrule Pitch
Colour (mm²) (mm2) (mm2) (mm2) (mm) 2 connections - 4 wires - 2 levels - with LED
0.5 to 4 0.5 to 4 6 20 372 80 Grey 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6 Voltage presence indicator (12/24V= et A)
For fuse cartridge 5 x 20 with handle lever
60 372 56 Grey 4 0.5 to 6 0.5 to 4 0.5 to 2.5 5
0.5 to 6 0.5 to 6 8
20 372 81 Grey 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6
75 to 10 0.75 to 10 10 For neutral circuit with blue handle lever Accessories (p. 18)
20 372 82 Grey/blue 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6
4 to 16 4 to 16 12 For standard circuit with handle lever
20 372 83 Grey 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6 End stops (p. 18)
ntry/2 outlets
For standard circuit with mini lever
0.5 to 4 0.5 to 2.5 5 20 372 84 Grey 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6
0.5 to 4 0.5 to 4 6 For circuit not broken with handle lever
Circuit not broken by the master isolating device
ntries/2 outlets 20 372 85 Orange 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6
0.5 to 4 0.5 to 2.5 5 For circuit not broken with mini lever
Circuit not broken by the master isolating device
0.5 to 4 0.5 to 4 6 20 372 86 Orange 2.5 0.5 to 2.5 0.5 to 2.5 0.5 to 2.5 6

Blade type levers, joining rods and blown

fuse indicators (p. 19)

ystem
BAT
New Starfix crimping tools Date:
27 Nom RMP:
V. Desmons
voir p. 30 H. Bosselin
Nom Chef de Pub:
Red catalogue numbers: New products P. PERICLE
17 Signature :

EX29026_14-23 - page 4 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

accessories for terminal blocks VikingTM 3 accessories f

Bridging combs
Cat. No 375 46/47
for 3 level terminal
Equipotential bars 375 62 blocks with screw
Cat. No 375 40/42/44 connection
for terminal blocks
Automatic bridging combs Cat. No 375 01 with screw connection
to 375 08 for terminal blocks with screw
or spring connection

375 95
End stop 375 10, screwless mounting 371 80 + 375 15 + 375 25

375 54

375 52
375 89

Markers CAB 3 label holders

375 11 with label 375 12 with CAB 3 labelling 375 13 with label holder Cat. No 387 43/44 Cat. No 383 92 for 375 66 + 371 63 + 371 03
holder 395 96 Duplix 384 98 Markers Cat. No for Logicab 2 terminal blocks with screw
CAB 3 markers 395 00/01/02 for printer connection
Logicab 2 flattbed Technical charact
Technical characteristics (p. 23) plotter
Emb. Réf. Equ
Pack Cat.Nos Rails for cutting to length Pack Cat.Nos End caps
Bar
Length 2 m Grey Fro
10 374 04 4 EN 60715 depth 7.5 mm For screw terminal blocks Con
10 374 07 3 depth 15 mm 100 375 50 1 entry/1 outlet 5, 6, 8 and 10 mm pitch 10 375 40 For
10 477 22 4 depth 7.5 mm with oblong holes 20 375 51 1 entry/1 outlet 12 and 15 mm pitch 10 375 42 (1) For
10 375 44 For
10 477 23 3 depth 15 mm with oblong holes 20 375 52 2 entries/2 outlets
20 375 53 2 levels Bri
45° mounting bracket 20 375 54 3 levels For
Cat
10 394 49 Set of 2 supports for tilting a rail 20 375 55 Disconnect type 6 mm pitch and function blocks Isol
at an angle of 45° 5 mm pitch
Supplied with 4 x M6 screws, nuts an washers
10 375 46 Bro
20 375 56 Disconnect type fuse cartridge 5 x 20 and 6.3 x 32
with screwed plug 10 375 47 Blu
End stops 10 375 57 Disconnect for measurement Bri
Fro
Accept CAB 3 markers For spring terminal blocks with 5 mm pitch Isol
Automatic 6 mm pitch Allows the block to become 6 mm pitch and take
a flexible wire fitted with a ferrule 4 mm2
20 375 82 For
50 375 10 Screwless mounting 20 375 85 For
For rails 4 depth 15 mm and 4 EN 60715 50 375 86 1 entry/1 outlet
depth 7.5 mm and 15 mm 50 375 87 1 entry/2 outlets
Accepts label holder Cat.No 395 96 Ac
20 375 88 2 entries/2 outlets
Acts as end cap for screw terminal blocks For
1 entry/1 outlet 5, 6, 8 and 10 mm pitch 20 375 89 2 levels
Bla
8 mm pitch For spring terminal blocks with 6 mm pitch For
20 375 11 For rails 4 depth 15 mm and 4 EN 60715 20 375 90 Disconnect type Man
depth 7.5 mm and 15 mm for
Accepts label holder Cat.No 395 96 Separation and insulation dividers 10/50 375 15 With
10 mm pitch 10/50 375 16 Blu
Grey 10/50 375 17 Gre
10 375 12 For rails 4 depth 15 mm and 4 EN 60715 depth For screw terminal blocks
7.5 mm (except for rail fixed on plate) and 15 mm
10/50 375 18 Min
20 375 60 1 entry/1 outlet 5, 6, 8 and 10 mm pitch Joi
For supporting protection or shielding bar:
- Brass bar Cat.Nos 373 00/01
10 375 61 1 entry/1 outlet 12 and 15 mm pitch
10 375 62 2 entries/2 outlets and disconnect type For
- Copper bar 12 x 4 mm with clamps Cat.No 373 02 20 375 21 For
- IP 2X terminal block with flat steel bar 12 x 2 mm 6 mm pitch
10 375 63 2 levels 20 375 22 For
Cat.No 048 19
- Copper bar 12 x 4 mm Cat.No 373 49 or 373 89
20 375 54 3 levels Blo
- Shielding bar 10 x 3 mm Cat.No 375 34 For spring terminal blocks Clip
10 375 95 1 entry/1 outlet, 1 entry/2 outlets and 372
12 mm pitch
2 entries/2 outlets 5 and 6 mm pitch 10/50 375 24 12/
20 375 13 For rails 1 EN 60715, 4 depth 15 mm and 4 10 375 96 2 levels fuse
EN 60715 depth 7.5 mm and 15 mm
After cutting out the upper divider, can be labelled
10/50 375 25 110
using Duplix label holder Cat.No 384 98 Equipotential bridging accessories 5x
Brigding combs for screw and spring terminal blocks
Identification accessories Front mounting (automatic insertion), screwless Sh
Isolated and separable. Consecutive or Ens
20 395 96 Transparent label holder with variable angle alternating connection. Red
Fixing on end stops Cat.Nos 375 10/11 Shi
Supplied with label 32 x 9.5 mm
20 375 01 (1)
For 10 blocks with 5 mm pitch
50 375 02 (1) For 2 blocks with 5 mm pitch For
BAT Can take label Cat.No 395 97 -m
20 395 97 Label for engraving 28 x 9.5 mm
20 375 04 (2) For 10 blocks with 6 mm pitch
Date: 50 375 05 (2) For 2 blocks with 6 mm pitch 10 x
For label holder Cat. No 395 96. Flexible ABS -m
Nom RMP: White background, black engraving 20 375 07(3) For 3 blocks with 8 mm pitch -m
V. Desmons 10 395 98 Black felt tip pen 20 375 08 (3) For 2 blocks with 8 mm pitch
(1) Blocks Cat. Nos 371 51/52: upper level only
10 375 30 For
H. Bosselin for permanent marking Block Cat.No 372 56: lower level only 10 375 31 For
Nom Chef de Pub: (2) Block Cat.No 371 56: lower level only 4 375 32 For
(3) Except for Cat.No 371 92
P. PERICLE Red catalogue numbers: New products
Signature : 18

EX29026_14-23 - page 5 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

accessories for terminal blocks VikingTM 3 (continued)

Bridging combs
Cat. No 375 46/47
for 3 level terminal
blocks with screw
connection 375 15 375 16

371 80 + 375 15 + 375 25 372 81 + 375 24 375 17 375 18

375 54

Shielding terminal block with end stops 375 12,

bar 375 34 and clamps 375 30/31

CAB 3 label holders

Cat. No 383 92 for 375 66 + 371 63 + 371 03 375 27 + 371 61 375 76 + 371 64 375 77 + 371 92 open
terminal blocks with screw
connection
Technical characteristics (p. 22)

Emb. Réf. Equipotential bridging accessories (continued) Emb. Réf. Shielding accessories (continued)
Bars for screw terminal blocks Ensure safe, simple connection of cable shielding
Front mounting with screws. Pre-assembled, bar Shielding bar
Consecutive or alternating connection For screw and spring terminal blocks. Steel. Length
mm pitch 10 375 40 For 12 blocks with 10 mm pitch 1 m. For use with end stops Cat.No 375 12
m pitch 10 375 42 (1) For 12 blocks with 12 mm pitch 10 375 34 10 x 3 mm
10 375 44 For 12 blocks with 15 mm pitch
Screening continuity bracket
Bridging combs for 3-level screw terminal blocks 50 375 35 For screw terminal blocks 1 entry/1 outlet
For lower and intermediate levels of blocks 5, 6, 8 and 10 mm pitch
Cat.Nos 371 51/52. Side mounting Connected with 2.8 x 0.8 mm clips
nd function blocks Isolated and separable or welded on. Capacity: 1 mm2
10 375 46 Brown. For 12 blocks with 5 mm pitch
ge 5 x 20 and 6.3 x 32 Protective screens
10 375 47 Blue. For 12 blocks with 5 mm pitch
Bridging combs for spring terminal blocks 1 pole
Front mounting (automatic insertion), screwless For screw terminal blocks 1 entry/1 outlet
with 5 mm pitch Isolated. Red 10 375 65 5 and 6 mm pitch
mm pitch and take 10 375 66 8 and 10 mm pitch
le 4 mm2
20 375 82 For 2 blocks with 10 mm pitch
20 375 85 For 2 blocks with 12 mm pitch 10 375 67 12 and 15 mm pitch
Cut to length
Accessories for disconnect blocks Length 1 m
Mounted on separation and insulation divider
For screw and spring terminal blocks For screw terminal blocks 1 entry/1 outlet
Blade type levers 10 375 68 5, 6, 8 and 10 mm pitch
with 6 mm pitch For open blocks Cat. Nos 371 80 and 372 80 (divider Cat.No 375 60)
Manual disconnection for handle type, tool required 10 375 69 12 and 15 mm pitch
for mini lever type (divider Cat.No 375 61)
n dividers 10/50 375 15 With handle lever for fuse cartridge 5 x 20
10/50 375 16 Blue handle lever for neutral
10/50 375 17 Grey handle lever Measurement accessories
10/50 375 18 Mini lever For screw and spring terminal blocks
mm pitch Joining rods 10 375 27(2) Measurement socket for Ø4 mm plug
m pitch for blocks with 5 and 6 mm pitch
nnect type For handle and mini lever
20 375 21 For 2 blocks For screw terminal blocks
20 375 22 For 3 blocks 50 375 75 Measurement socket for Ø2 mm plug
Blown fuse indicators for blocks with 10 mm pitch Cat.Nos 371 03/63
Clip directly onto blocks Cat.Nos 371 81, 20 375 76 Measurement socket for Ø4 mm plug
372 81 or handle lever 375 15 (with power off) for blocks with 12 and 15 mm pitch
ets and Cat.Nos 371 04/05/64/65
m pitch 10/50 375 24 12/24/48 V= and A for block with 10 375 77 Measurement socket for Ø4 mm plug
fuse cartridge 5 x 20 with handle lever for disconnect block for measurement Cat.No 371 92
10/50 375 25 110/250 VA for block with fuse cartridge
ccessories 5 x 20 with handle lever IP 2X safety tip adaptor
1/10 394 45 Ø2 mm test plug - Retractable tube
d spring terminal blocks For performing ad-hoc tests in accordance
sertion), screwless Shielding accessories with regulations on the protection of workers
ecutive or Ensure safe, simple connection of cable shielding Fixes directly on the Ø4 mm plug
Shielding clamps
h
For screw and spring terminal blocks
h - mounted by pivoting on collector bar BAT
10 x 3 mm Cat.No 375 34 Date:
- mounted on plate with M4 screws (supplied)
- mounted on rail 4 with Cat.No 364 69 Nom RMP:
10 375 30 For cable diam. 3 to 8 mm (1) Except for Cat.No 371 87 V. Desmons
evel only
10 375 31 For cable diam. 4 to 13.5 mm (2) Except for disconnect blocks with handle lever, screw terminal
block with LED and spring function blocks. 2 and 3-level terminal
H. Bosselin
ly 4 375 32 For cable diam. 10 to 20 mm blocks: upper level only Nom Chef de Pub:
Bold pack quantities: Minimum quantities to be ordered P. PERICLE
Red catalogue numbers: New products
19 Signature :

EX29026_14-23 - page 6 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

terminal blocks with screw connection VikingTM 3

n Characteristics and dimensions (mm) Blocks for protection conductor Function blocks
V2 polyamide according to UL 94, 960°C according to IEC EN 60695-2-11 Voltage (V) Current (A) Nominal cross- section Voltage (V
Cat.Nos
Connecting blocks IEC CSA UL
Ie IEC IEC (mm2) CSA (AWG) UL (AWG)
Cat.Nos
IEC CSA
Nominal 371 70 - - 2.5 12 12
Voltage (V) Current (A) 371 71 - - 4 10 10 371 53 250 -
cross-section
Cat.Nos 371 72 - - 6 8 8 371 54 250 -
IEC CSA UL 800 600 600
IEC CSA UL Ie IEC CSA UL 371 73(1) 63 57 10 6 6 371 55 500 300
(mm2) (AWG) (AWG)
371 74(1) 85 76 16 4 4 371 56 12 to 24 12 to 24
371 00/20/30/60 27 24 20 20 2.5 12 12 371 75(1) 138 125 35 2 2
371 01/21/31/61 36 32 30 30 4 10 10 IEC 60947-7-1, CSA no. 22-2 n
371 76 - - - - - 35 - -
371 02/62 48 41 50 50 6 8 8 371 77 36 32 4 10 10
800 600 600 800 600 600 Cat.Nos 371 53/54
371 03/63 63 57 60 60 10 6 6 371 78 48 41 6 8 8
371 04/64 85 76 85 85 16 4 4 371 79 500 300 300 - - 4 10 10
371 05/65 138 125 115 115 35 2 2 71.2
IEC 60947-7-1/7-2, CSA no. 22-2 no. 158, UL 1059 65.9
371 07/67 27 24 20 20 2.5 12 12 Ie: Rated current NF C 15100 table 52H, column 4
371 08/68 500 300 300 36 32 30 30 4 10 10 (1) PEN terminal blocks 26.8
371 09/69 36 32 30 30 4 10 10
371 66 1000 600 600 213 192 200 200 70 000 000 Cat.Nos
371 77 36 32 30 30 4 10 10 371 70/71/72/73 Cat.Nos 371 74/75 Cat.No 371 76
800 600 600

46.5
371 78 48 41 50 50 6 8 8

54
Cat.No 371 51: see blocks for sensors 52.2 54.5 50.5
IEC 60947-7-1, CSA no. 22-2 no. 158, UL 1059 45.8
Ie: Rated current NF C 15100 table 52H, column 4

41.5
29.3
Cat.Nos 371 00/01/02/

49
36.8
46.4

63
03/20/21/30/31/60/61/ Cat.Nos

70.5
53.9
62/63/77/78 371 04/05/64/65 Cat.No 371 66 Schematic diagrams
52.2 57.1 64.6 Cat.No 371 53
45.8 54.5 62

Cat.Nos 371 77/78 Cat.No 371 79

46.4

52.2 57
53.9

63
63

45.8
70.5

54.4
70.5

46.4

Cat.No 371 56

51.2
53.9

58.7
Cat.Nos 371 09/69 Cat.Nos 371 07/08/67/68 + +

57 74.8 - -
54.4 72.2
Disconnect terminal blocks
Nominal
51.2

Voltage (V) Current (A)

62.5
58.7

cross- section Blocks for sensors an

Cat.Nos
70

IEC CSA UL
IEC CSA UL IEC CSA UL (mm2) (AWG) (AWG) Voltage (V)
371 80 500 300 300 15 15 15 Cat.Nos
371 81 ou IEC CSA
250 250 250 6.3 6.3 6.3
371 80 + 375 15
371 82 371 51
2.5 400 300
371 83 12 12 371 52
Approved by ATEX: 371 84 500 300 300 15 15 15 IEC 60947-7-1/7-2, CSA no. 22
LCIE 07 ATEX 0010 U-0081 II 1 or 2 G or D Ex e/i/tD/iD II 371 85 Ie: Rated current NF C 15100
371 86
The terminal blocks with screw connection covered by this certificate are 371 87/88 250 250 250 10 10 10 10 Cat.Nos 371 51/52
1-, 2- and 3-level connecting terminal blocks, and blocks for protection IEC 60947-7-1/7-3, CSA no. 22-2 no. 158, UL 1059
84.5
conductor with metal(1) and plastic base (detailed list on p. 8)
The main characteristics are: Power according to EN 60947-7-3
Operating temperature: - 30°C to + 55°C
Maximum temperature of materials: + 85°C Short-circuit Short-circuit + overload

67.4
74.9
Cat.Nos
Separate blocks Assembled blocks Separate blocks Assembled blocks 38.8
Working voltage acc. to EN 60079-7: 1-level terminal blocks: 500 V
371 81 or 4 W / 6.3 A 1.6 W/6.3 A 1.6 W/6.3 A -
Blocks with 2 entries - 2 outlets: 250 V 371 80 + 375 15(1) Pvk = 4.75 W Pvk = 2 W Pv = 1.65 W -
2 and 3-level terminal blocks: 250 V 4W 2.5 W 1.6 W -
371 87/88
Pvk = 5 W Pvk = 2.7 W Pv = 1.8 W -
Rated current:
(1): With or without blown fuse indicator Cat.No 375 25
Conductor
cross-section (mm2)
2.5 4 6 10 16 35 70 Wiring principle
Cat.No 371 80 Cat.Nos 371 81/82/83/85 Cat.Nos 371 84/86 Block for sensor Cat.N
Rated current (A) 18 23 30 42 57 93 144 71.2 91.6 84.2
26.8
Attestation of conformity of component for the customer is available 26.8 26.8
on request
46.4

83.1

(1) Except for Cat.No 371 76

76.3
53.9

90.6

83.8
52.3

71.2 71.2
46.5

Signal
59.8

54

Automation
Bridging comb
Cat.Nos 375 46/47
Cat.No 371 87/88
65.5
Power supply
or Ph - N
BAT
65.5

Date:
73

Nom RMP:
V. Desmons
H. Bosselin
Nom Chef de Pub:
P. PERICLE
Signature : 20

EX29026_14-23 - page 7 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

Function blocks Block for actuator Cat.No 371 52 PNE block Cat.No 371 52
Voltage (V) Current (A) Nominal cross- section To Phase
Nominal cross- section actuators
Cat.Nos Neutral
m2) CSA (AWG) UL (AWG) IEC CSA UL
IEC CSA UL IEC CSA UL Signal
12 12 (mm2) (AWG) (AWG)
10 10 371 53 250 - - - - - 2.5 - -
8 8 371 54 250 - - 1 - - 2.5 - - common
6 6 371 55 500 300 300 1 1 1 4 10 10 Signal
4 4 371 56 12 to 24 12 to 24 12 to 24 32 30 30 4 10 10
2 2 IEC 60947-7-1, CSA no. 22-2 no. 158, UL 1059 Automation
- -
10 10 Bridging comb
8 8 Cat.Nos 371 53/54 Cat.Nos 371 55/56 Cat.No 375 47
10 10 71.2 74.8
65.9 72.2
26.8

Disconnect block for measurement

62.5

at.No 371 76
46.5

70

Voltage (V) Current (A) Nominal cross- section

54

50.5
Cat.Nos
IEC CSA UL
IEC CSA UL IEC CSA UL (mm2) (AWG) (AWG)
41.5
29.3

371 92 800 - - 24 - - 4 - -
36.8

IEC EN 60947-7-1
Schematic diagrams
Cat.No 371 92
Cat.No 371 53 Cat.No 371 54 Cat.No 371 55
73.2

62
69.5
Cat.No 371 56
Diode for Cat.Nos 371 54/55
+ + - 1N4007 type 1A Wiring principle for measurement blocks Cat.No 371 92
- direct current = 1 A
- - - peak inverse voltage 1000 V Ammeter circuit Wattmeter circuit
- inverse current 5 µA at 25°C

Nominal
cross- section Blocks for sensors and actuators/PNE
IEC CSA UL
(mm2) (AWG) (AWG) Nominal
Voltage (V) Current (A) cross- section
Cat.Nos
IEC CSA UL
IEC CSA UL Ie IEC CSA UL (mm2) (AWG) (AWG)
371 51
2.5 400 300 300 27 24 20 20 2.5 12 12
12 12 371 52
IEC 60947-7-1/7-2, CSA no. 22-2 no. 158, UL 1059
Ie: Rated current NF C 15100 table 52H, column 4
10 Cat.Nos 371 51/52 L1
Normal Test Short-circuit L2
84.5 position position position
L3
Per circuit: N
2 x Disconnect blocks for measurement PE
Short-circuit + overload
67.4

Cat.No 371 92
74.9

38.8 4 x Measurement sockets for Ø4 mm plug

ate blocks Assembled blocks Cat.No 375 77 10 x Disconnect blocks for measurement
W/6.3 A - 1 x End cap Cat.No 375 57 Cat.No 371 92
1 x Shunt with Ø4 mm plugs 12 x Measurement sockets for Ø4 mm plug
= 1.65 W - Cat.No 375 77
1.6 W - 1 x End cap Cat.No 375 57
= 1.8 W - 3 x Shunts with Ø4 mm plugs
Stripped lengths (mm)
Wiring principle
Screw terminal pitch (mm) Rigid or flexible wire
at.Nos 371 84/86 Block for sensor Cat.No 371 51 5
84.2 6 to 8
6
8
Sensors 10 to 12
10
26.8 12 13 to 17
Signal 15 14 to 18
22 15 to 22
76.3

71.2
46.5

Signal
54

Power supply
(shared) Protection against fire and panic risks in public
Automation
buildings/UTE C 12-201 guide
Bridging comb
Cat.Nos 375 46/47 Art. EL 3, definitions: "Security installations are those that have
to be put into or maintained in service to ensure the evacuation
of the public or facilitate the intervention of the first-aid"
Power supply Art. EL 16, power supply circuits in security installations section
or Ph - N
1a: "…the corresponding junction or deviation devices and their
enclosures, except for the waterproofing systems, must satisfy BAT
the incandescent wire test defined in the standard in force, the Date:
temperature of the incandescent wire being 960 °C" Nom RMP:
Viking 3 terminal blocks satisfy the incandescent wire test 960 °C V. Desmons
according to standard IEC 60695-2-11
H. Bosselin
Nom Chef de Pub:
P. PERICLE
21 Signature :

EX29026_14-23 - page 8 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

terminal blocks with spring connection VikingTM 3

n Characteristics and dimensions (mm) Stripped lengths (mm

V2 polyamide according to UL 94, 960°C according to IEC EN 60695-2-11 Spring terminal pitch (mm)
Connecting blocks Schematic diagrams 5
6
Voltage (V) Current (A) Nominal Cat.No 372 54 Cat.No 372 55 Cat.No 372 56 8
cross- section 10
Cat.Nos 12
IEC CSA UL
IEC CSA UL Ie IEC CSA UL (mm2) (AWG) (AWG)
372 00
36 32 20 20 4 12 12
372 01
372 02 800 600 600 48 41 30 30 6 10 10 Protection against fi
372 03 63 57 50 50 10 8 8 buildings/UTE C 12-2
372 04 85 76 65 65 16 6 6
372 07
500 300 300 30 30 10 10 Diode for Cat.Nos 372 54/55 Art. EL 3, definitions:
372 08 to be put into or maint
372 09 - 1N4007 type 1A
372 20 - direct current = 1 A of the public or facilita
372 21 - peak inverse voltage 1000 V Art. EL 16, power sup
372 40
372 41
- inverse current 5 µA at 25°C 1a: "…the correspond
372 42
36 32 4 enclosures, except for
20 20 12 12 the incandescent wire
372 43
372 44 800 600 600 Approved by ATEX: temperature of the inc
372 46 LCIE 07 ATEX 0010 U-0081 II 1 or 2 G or D Ex e/i/tD/iD II Viking 3 terminal bloc
372 47
372 60 The terminal blocks with spring connection covered by this certificate according to standard
372 61 are 1- and 2-level connecting terminal blocks, and blocks for protection
372 62 48 41 30 30 6 10 10
372 63 63 57 50 50 10 8 8
conductor with metal base (detailed list on p. 10)
372 64 85 76 65 65 16 6 6 The main characteristics are:
372 67
500 300 300 30 30 10 10
Operating temperature: - 30°C to + 55°C
372 68 36 32 4 Maximum temperature of materials: + 85°C
372 69 800 600 600 20 20 12 12
IEC 60947-7-1, CSA no. 22-2 no. 158, UL 1059 Working voltage acc. to EN 60079-7: 1-level terminal blocks: 500 V
Ie: Rated current NF C 15100 table 52H, column 4 Blocks with 2 entries - 2 outlets: 500 V
2-level terminal blocks: 250 V
Blocks for protection conductor
Rated current:
Voltage (V) Nominal cross- section
Cat.Nos Conductor
IEC CSA UL IEC (mm2) CSA (AWG) UL (AWG) 4 6 10 16
cross-section (mm2)
372 10
372 11 Rated current (A) 23 30 42 57
372 12 4
10 10
372 70
372 71 800 600 600
Attestation of conformity of component for the customer is available
372 72 6 on request
372 73(1) 10 8 8
372 74(1) 16 6 6
372 79 4 10 10
IEC 60947-7-2, CSA no. 22-2 no. 158, UL 1059
Disconnect blocks
(1): PEN terminal blocks
Voltage (V) Current (A) Nominal cross- section
Cat.Nos
Function blocks IEC CSA UL IEC CSA UL IEC CSA UL
(mm2) (AWG) (AWG)
Voltage (V) Current (A) Nominal cross- section 372 80 500 300 300 15 15 15
Cat.Nos 372 81 or
IEC CSA UL 250 250 250 6.3 6.3 6.3
IEC CSA UL IEC CSA UL 372 80 + 375 15
(mm2) (AWG) (AWG) 372 82 2.5 14 14
372 54 372 83
500 300 300 1 1 1 372 84 500 300 300 15 15 15
372 55 4 14 14
372 56 12 to 24 12 to 24 12 to 24 - - - 372 85
372 86
IEC 60947-7-1, CSA no. 22-2 no. 158, UL 1059
IEC 60947-7-1/7-3, CSA no. 22-2 no. 158, UL 1059
Cat.Nos 372 00/01/20/
21/60/61/70/71 Cat.Nos 372 02/62/72 Cat.Nos 372 03/63/73 Power according to EN 60947-7-3
54 66.4 74.3 Short-circuit Short-circuit + overload
Cat.Nos
Separate blocks Assembled blocks Separate blocks Assembled blocks
48.7

372 81 ou 4 W / 6.3 A 1.6 W / 6.3 A 1.6 W / 6.3 A -

42.1

44

56.2
51.5
49.6

372 80 + 375 15(1) Pvk = 4.75 W Pvk = 2 W Pv = 1.65 W -

(1): With or without blown fuse indicator Cat.No 375 25

Cat.No 372 80 Cat.Nos 372 81/82/83/85

Cat.Nos 372 10/11/40/ Cat.Nos 372 09/12/46/ 80 91.7
Cat.Nos 372 04/64/74 41/42/43/44 47/54/69/79 27 27
84.9 69.4 84.7 80
46.6
54.1

83
90.5
42.1

52.3
42.1
51.3

49.6

59.8
49.6
58.8

Cat.No 372 84/86

Cat.Nos 372 07/08/55/56/67/68
83.3
89.1 27
42.4
BAT 80
Date:
76.3
56.1

83.8

Nom RMP:
46.5
63.6

V. Desmons
54

H. Bosselin
Nom Chef de Pub:
P. PERICLE
Signature : 22

EX29026_14-23 - page 9 Thursday, February 12, 2009 10:56:46 AM

 VIKING EP0

accessories for terminal blocks VikingTM 3

Stripped lengths (mm) n Characteristics and dimensions (mm)

Spring terminal pitch (mm) Rigid or flexible wire End stops
5
6 8 to 12 Cat.No 375 10 Cat.No 375 11
Cat.No 372 56 8
52.7 48.4
10 8 to 13
12 8 to 15 45.9

31.8

39.3
46.4
Protection against fire and panic risks in public

53.9
buildings/UTE C 12-201 guide
Art. EL 3, definitions: "Security installations are those that have
to be put into or maintained in service to ensure the evacuation
of the public or facilitate the intervention of the first-aid" Cat.No 375 12 Cat.No 375 13
Art. EL 16, power supply circuits in security installations section 114 49.7
1a: "…the corresponding junction or deviation devices and their
enclosures, except for the waterproofing systems, must satisfy
the incandescent wire test defined in the standard in force, the

40.3
38.8
51.5
temperature of the incandescent wire being 960 °C"

46.3
59
Ex e/i/tD/iD II Viking 3 terminal blocks satisfy the incandescent wire test 960 °C
red by this certificate according to standard IEC 60695-2-11
nd blocks for protection
)

Separation and Equipotential bridging

minal blocks: 500 V End caps insulation dividers combs/bars
2 entries - 2 outlets: 500 V Thickness Thickness Cross-section
minal blocks: 250 V Cat.Nos Cat.Nos Cat.Nos
(mm) (mm) (mm2)
375 50 2 375 54 2.5 375 01 2.5
375 51 2.5 375 60 2.5 375 02 2.5
375 52 2 375 61 2.6 375 04 4
375 53 2 375 62 2.5 375 05 4
375 54 2.5 375 63 2.5 375 07 6
375 55 2 375 95 2.8 375 08 6
375 56 1.4 375 96 2.7 375 40 10
375 57 1.4 375 42 16
375 86 1 375 44 35
ustomer is available 375 46 2.5
375 87 1.1
375 88 1.1 375 47 2.5
375 89 1.1 375 82 10
375 90 2 375 85 16

Shielding clamps
Nominal cross- section
Mounting on rail
IEC CSA UL Mounting on bar with accessory
(mm2) (AWG) (AWG)
10 x 3 Cat.No 375 34 Cat.No 364 69 Mounting on plate

2.5 14 14

A B
Short-circuit + overload
ate blocks Assembled blocks
W / 6.3 A -
= 1.65 W -
C
D

M4

Cat.Nos A B C D
375 30 13.5 18 26 5.6
375 31 20 20.3 31.4 5.3
375 32 24.8 26 40 5.3

BAT
Date:
Nom RMP:
V. Desmons
H. Bosselin
Nom Chef de Pub:
P. PERICLE
23 Signature :

EX29026_14-23 - page 10 Thursday, February 12, 2009 10:56:46 AM

 VIKING-EP0

VikingTM 3 power terminal blocks VikingTM 3 pow

n Characteristics o
aluminium cables
IK 04
Conform to IEC EN 609
UL 1059 and 486 E - C
Fire resistant IEC EN 6
V2 according to UL 94
Insulation voltage Ui: 1
With CAB 3 and Impulse voltage Uimp:
Duplix marking Insulating material:
- polyamide body - 30°
390 11 (interior view) - polypropylene cover

Connection table

Connection W
Cat.Nos (mm2) pla
Cable - Cable
Rigid or flexible
390 10 Cu/Al: 35 to 120
Rigid or flexible
390 11 Cu/Al: 70 to 300
Cable lug - Cable lug
390 13 Cu/Al: max. 95
390 11 Possibility of sealing 390 10 Direct connection Al/Cu 390 14 Cu/Al: max. 150
390 15 Cu/Al: max. 300
Cable lug - Cable
390 17 Cu/Al: max. 150

390 18 Cu/Al: max. 300

Pack Cat.Nos For copper and aluminium cables Pack Cat.Nos For bars or lugs Cable - Cable lug
Bridging the gap between the enclosure and Rigid or flexible
Bridging the gap between the enclosure and 390 20 Cu: 35 to 120
external cables external cables Al: 35 to 120
Fixed using metal clip for rails 4 15 mm depth and With cable lug. Plastic foot Rigid or flexible
For use with terminal marker sheets 390 21 Cu: 70 to 300
4 EN 60715 15 mm depth, or on plate with screws Al: 70 to 300
Fitted with covers with cut-outs For symmetrical rails
Permits the use of Cab 3, Duplix markers Fixed using metal clip on rails 4 15 mm depth
Test via test plug Ø4 closed covers le Cable - cable
Blocks with identical pitch can be joined using Availab 009 and 4 EN 60715 15 mm depth
2
a threaded rod March Connecting max.
(mm²)
Width of plate
(mm) Screw Ø Pitch (mm)
Supports shunt with Cat.Nos 394 46/47 5 390 71 35 15 M8 26
Cable/cable 5 390 72 70 20 M 10 34
Rigid or flexible Rigid or flexible 5 390 73 120 25 M 10 34
connecting cable connecting cable 5 390 74 240 35 M 12 46
(mm²) (mm²) Pitch (mm)
Terminal for cable lug
5 390 10 Al/Cu 35 to 120 Cu 35 to 70 42 For asymmetrical rails
5 390 11 Al/Cu 70 to 300 Cu 70 to 150 55 Fixed using metal clip on rails 1 EN 60715
Cable lug/cable lug 5 390 31 35 15 M8 26
Connecting plate Connecting plate 5 390 32 70 20 M 10 34
max. (mm²) max. (mm²) Pitch (mm) 5 390 33 120 25 M 10 34
5 390 13 Al/Cu 95 Al/Cu 95 36 5 390 34 240 35 M 12 46
5 390 14 Al/Cu 150 Al/Cu 150 42
5 390 15 Al/Cu 300 Al/Cu 300 55
Currents table
Cable lug/cable Accessories for plate power terminal blocks
Rigid or flexible
Connecting plate connecting cable Separation barriers Current
max. (mm²) (mm²) Pitch (mm) Take protective covers
5 390 17 Al/Cu 150 Cu 35 to 95 42 Marking possible with CAB 3 Cat.Nos Shunted
5 390 18 Al/Cu 300 Cu 70 to 150 55 input c
10 394 77 For blocks with pitch 26 mm
IEC IEC
Cable/cable lug 10 394 78 For blocks with pitch 34 and 46 mm
Rigid or flexible Cable - Cable
connecting cable Connecting plate Protective covers
(mm²) max. (mm²) Pitch (mm) For mounting on separation barriers 390 10 340 250
5 390 20 Cu 35 to 120 Al/Cu 120 42 5 394 86 For 3 blocks with pitch 46 mm 390 11 570 400
Al 35 to 120 Al/Cu 70 or for 4 blocks with pitch 34 mm Cable lug - Cable lug
5 390 21 Cu 70 to 300 Al/Cu 300 55 5 394 88 For 4 blocks with pitch 26 mm 390 13 310 310
Al 70 to 300 Al/Cu 150 5 394 89 For 4 blocks with pitch 46 mm 390 14 415 415
390 15 670 670
Accessories for power terminal blocks for Ccable lug - Cable
copper and aluminium cables 390 17 415 315
End stops (p. 19)
Shunt 390 18 670 420
5 394 46 For blocks with pitch 36 and 42 mm Cable - Cable lug
BAT 5 394 47 For blocks with pitch 55 mm 390 20 340 340
Date :
390 21 570 570
Marketing France :
Shunts
C. Pipia
394 46 450 max.
Nom RMP :
394 47 700 max.
O. Pinel
H. Bosselin
Nom chef de Pub :
C. Brissaud
Signature :
Red catalogue numbers: New products

24

EX29026_24-33 - page 1 Thursday, February 12, 2009 10:56:40 AM

 VIKING-EP0

VikingTM 3 power terminal blocks

n Characteristics of power terminal blocks for copper and Cable section quivalence table
aluminium cables mm2 35 70 95 120 150 185 300
IK 04 AWG 2 00 0000 250 300 350 600
Conform to IEC EN 60947-7-1
UL 1059 and 486 E - CSA 22-2
Fire resistant IEC EN 60695-2-11: 960°C (except cover) Dimensions (mm)
V2 according to UL 94
Insulation voltage Ui: 1000 V
Impulse voltage Uimp: 12 kV
Insulating material:
- polyamide body - 30°C to + 100 °C

G
H
F
- polypropylene cover -25 °C to + 100 °C B

Connection table

D
C
E
Connection Width of Screw Connection Width of Screw
Cat.Nos (mm2) plate (mm) Ø (mm2) plate (mm) Ø
Cable - Cable
Rigid or flexible Rigid or flexible A min.
390 10 Cu/Al: 35 to 120 Cu: 35 to 70 A max.
Rigid or flexible Rigid or flexible
390 11 Cu/Al: 70 to 300 Cu: 70 to 150
Cable lug - Cable lug Cat.Nos A max. A min. B C D E F G H
390 13 Cu/Al: max. 95 28 M8 Cu/Al: max. 95 28 M8 390 13 227 155 36 82 73 88 176 185 191
nection Al/Cu 390 14 Cu/Al: max. 150 34 M 10 Cu/Al: max. 150 34 M 10 390 10/14/17/20 296 200 42 83.5 74.5 89.5 212 221 227
390 15 Cu/Al: max. 300 46 M 12 Cu/Al: max. 300 46 M 12
390 11/15/18/21 337 216 55 107.3 98.5 113.5 257 266 272
Cable lug - Cable
Rigid or flexible
390 17 Cu/Al: max. 150 34 M 10 Cu: 35 to 95
Rigid or flexible
390 18 Cu/Al: max. 300 46 M 12 Cu: 70 to 150 n Characteristics of bars or lugs power terminal blocks
Cable - Cable lug
Voltage (V) Intensity (A) IEC EN 60947-7-1
e enclosure and Rigid or flexible Cat.Nos
390 20 Cu: 35 to 120 Cu/Al: max. 120 34 M 10 IEC IEC Fire resistance:
Al: 35 to 120 Cu/Al: max. 70 390 31/71 1000 125 960°C, IEC EN 60695-2-11
Rigid or flexible 390 32/72 1000 192 V2 according to UL 94
sheets 390 21 Cu: 70 to 300 Cu/Al: max. 300 46 M 12
Al: 70 to 300 Cu/Al: max.150 390 33/73 1000 269 Insulating material: polyamide - 30 °C
390 34/74 1000 415 to + 100 °C
Terminal for cable lug -
4 15 mm depth Cable - cable terminal for cable lug Dimensions (mm)
th
A A
Screw Ø Pitch (mm)
M8 26
M 10 34

B'
M 10 34
B

M 12 46
Terminal for cable lug - cable Cable - terminal for cable lug
1 EN 60715
M8 26 C C
M 10 34 Cat.Nos 390 31/32/33/34 Cat.Nos 390 71/72/73/74
M 10 34
Cat.Nos A B B' C
M 12 46 390 31 M8 56 84
390 32 M 10 61 84
Currents table 390 33 M 10 61 84
wer terminal blocks 390 34 M 12 64 86
Short-circuit Tightening torque 390 71 M8 55.3 84
Current (A) 390 72 M 10 60.4 84
current (kA) (Nm)
390 73 M 10 60.4 84
Cat.Nos Shunted I/O 390 74 M 12 63.5 86
input currents Shunted I/O Site Factory
IEC IEC CSA UL input
46 mm
Cable - Cable
390 10 340 250 200 175 14.4 8.4 15 15
n Separation barriers
arriers
m 390 11 570 400 300 285 36 18 35 35 Dimensions (mm)
mm Cable lug - Cable lug B
m 390 13 310 310 250 230 11.4 11.4 15 15
m 390 14 415 415 340 285 18 18 15 15
390 15 670 670 520 420 36 36 35 35
A

Ccable lug - Cable

Cat.Nos A B Th.
390 17 415 315 210 230 18 11.4 15 15
394 77 106 82 8
390 18 670 420 325 285 36 18 35 35 Cat.Nos 394 77/78 394 78 188 102 12
Cable - Cable lug
BAT
390 20 340 340 235 255 14.4 8.4 15 15
Date :
390 21 570 570 375 420 36 18 35 35
Marketing France :
Shunts
C. Pipia
394 46 450 max. 6
Nom RMP :
394 47 700 max. 10
O. Colange
P. Leneutre
Nom chef de Pub :
C. Brissaud
Signature :

25

EX29026_24-33 - page 2 Thursday, February 12, 2009 10:56:40 AM

 CAB 3TM marking and isolating sleeves CAB 3TM marking and isolating sleeves CAB 3TM mark
for wiring and Viking

n Characteristics
Material PA 6.6
Installation temperature: - 5°C to + 40°C
Operating temperature: - 25°C to + 105°C 381
Storage temperature: - 40°C to + 70°C
388 50 388 58 388 63 Incandescent wire test: 960°C
Dielectric cross resistance: 6KV

NEW

Supplied in dispenser box

388 66 388 67 388 77

n Dimensions (mm)
For colour-marking cables and isolating lug tubes from 10 mm2 to 300 mm2 Same markers for cable and term
Fitting and removal without tool before or after connection A
Cat.No A ØB ØC
388 49 to 54 20.2 8.87 10.9
Pack Cat.Nos Sleeves 388 55 to 60 29.4 11.57 14.5 Strips of 20 markers
For marking wiring or Vik
Conductor Ø7.1 to 10.5 mm 388 61 to 66 37.9 14.97 18.4
Cross-section 10 to 25 mm2(1) 388 67 to 72 46.1 19.07 23.3
Colour Length (mm) 388 73 to 78 55.14 25.51 30.7
100 388 49 blue Pack Cat.Nos Ma
100 388 50 black cro
100 388 51 brown 20 Num
100 388 52 red (ava
100 388 53 yellow C
240 381 50 01 t
B

100 388 54 yellow/green 240 381 51 21 t

Conductor Ø10 to 13.5 mm 240 381 52 41 t
240 381 53 61 t
Cross-section 25 to 50 mm2(1) 240 381 54 81 t
Colour Length (mm) 240 381 55 Bla
50 388 55 blue
50 388 56 black n Installation
50 388 57 brown 29.5 Ma
50 388 58 red cro
50 388 59 yellow Num
50 388 60 yellow/green (ava
Conductor Ø13 to 17 mm 240 381 60 01 t
Cross-section 50 to 95 mm2(1) 240 381 61 21 t
Colour Length (mm)
240 381 62 41 t
240 381 63 61 t
25 388 61 blue 240 381 64 81 t
25 388 62 black 240 381 65 Bla
25 388 63 brown 38
25 388 64 red
25 388 65 yellow
25 388 66 yellow/green
Conductor Ø16.5 to 23 mm
Cross-section 95 to 185 mm2(1) n Example of use
Colour Length (mm)
20 388 67 blue
20 388 68 black
20 388 69 brown 46
20 388 70 red
20 388 71 yellow
20 388 72 yellow/green
Conductor Ø22.5 to 29 mm
Cross-section 185 to 300 mm2(1)
Colour Length (mm)
10 388 73 blue Example of use of sleeve Use of a sleeve on a wired DPX 250
Cat.No 388 61 on a power
10 388 74 black terminal block
10 388 75 brown 55
10 388 76 red
10 388 77 yellow
10 388 78 yellow/green

(1) The values for cable cross section are just an example, the real
values are depending on lugs and cable type
Red catalogue numbers: New products

26

EX29026_24-33 - page 3 Thursday, February 12, 2009 10:56:40 AM

ng sleeves CAB 3TM marking system marking label sheets
for wiring and Viking 3 terminal blocks for Viking 3 terminal blocks

381 51 381 64

395 20

ox

395 05 on Viking 3
terminal blocks

Same markers for cable and terminal blocks

395 98
at.No A ØB ØC
49 to 54 20.2 8.87 10.9
55 to 60 29.4 11.57 14.5 Strips of 20 markers
For marking wiring or Viking 3 terminal blocks
61 to 66 37.9 14.97 18.4
67 to 72 46.1 19.07 23.3
73 to 78 55.14 25.51 30.7
Pack Cat.Nos Markers for wiring 0.5 to 1.5 mm2 Pack Cat.Nos Blank markers
cross-section and terminal blocks
Displayed by sheet of 100 pre-cut markers
Numbers: black on white background Manual marking or via Logicab 2
(available in black on yellow background on request) 1000 395 00 For blocks 5 mm pitch
240 381 50 01 to 20 1000 395 01 For blocks 6 mm pitch
240 381 51 21 to 40 1000 395 02 For blocks 8 mm pitch
240 381 52 41 to 60
240 381 53 61 to 80
240 381 54 81 to 100 381 51 Numbers
240 381 55 Blank Reading of installed marker
Horizontal format
Markers for wiring 1.5 to 2.5 mm2 Pitch of 5 mm
cross-section and terminal blocks 1000 395 05 From 1 to 10 (10 times)
Numbers: black on white background 1000 395 06 From 11 to 20 (10 times)
(available in black on yellow background on request) 1000 395 07 From 21 to 30 (10 times)
1000 395 08 From 31 to 40 (10 times)
240 381 60 01 to 20 1000 395 09 From 1 to 50 (2 times)
240 381 61 21 to 40 1000 395 10 From 1 to 100
240 381 62 41 to 60 1000 395 11 From 101 to 200
240 381 63 61 to 80 381 64
240 381 64 81 to 100
240 381 65 Blank Pitch of 6 mm
1000 395 15 From 1 to 10 (10 times)
1000 395 16 From 11 to 20 (10 times)
1000 395 17 From 21 to 30 (10 times)
1000 395 18 From 31 to 40 (10 times)
1000 395 19 From 1 to 50 (2 times)
1000 395 20 From 1 to 100
1000 395 21 From 101 to 200

Black felt tip pen

10 395 98 Indelible for marking

red DPX 250

27

EX29026_24-33 - page 4 Thursday, February 12, 2009 10:56:40 AM

 CAB 3TM marking system accessories C
markers for wiring and Viking 3 terminal blocks

384 90 384 9

Perfect alignment of label holders 382 12 Terminal block with CAB 3 markers and label-holders

383 97
Pack Cat.Nos Markers for wiring 0.15 to 0.5 mm2 Pack Cat.Nos Markers for wiring 1.5 to 2.5 mm2
and 0.5 to 1.5 mm2 cross-section and 4 to 6 mm2 cross-section
and terminal blocks
Pack:
On Viking 3 terminal blocks - Up to 0.5 mm2: strips of 25 markers
- 4 markers 0.15 to 0.5 mm2 max. From 0.5 mm2 to 2.5 mm2: strips of 30
- 3 markers 0.15 to 1.5 mm2 max. markers
Pack: - Upper 2.5 mm2: strips of 20 markers
- Up to 0.5 mm2: strips of 25 markers Price per marker
From 0.5 mm2 to 2.5 mm2: strips of 30 Pack Cat.Nos Ac
markers 1.5 to 2.52 4 to 62 Digits: international colour code
- Upper 2.5 mm2: strips of 20 markers 1200 800 382 20 382 30 0 Black Mar
Price per marker 1200 800 382 21 382 31 1 Brown For
1200 800 382 22 382 32 2 Red Cap
0.15 to 0.52 0.5 to 1.52 Digits: international colour code 1200 800 382 23 382 33 3 Orange 382 32 8d
1000 1200 381 00 382 10 0 Black 1200 800 382 24 382 34 4 Yellow 1.5
1000 1200 381 01 382 11 1 Brown 1200 800 382 25 382 35 5 Green Bla
1000 1200 381 02 382 12 2 Red 1200 800 382 26 382 36 6 Blue 100 384 90 10 t
1000 1200 381 03 382 13 3 Orange 381 06 1200 800 382 27 382 37 7 Purple 382 26 50 384 91 25 t
1000 1200 381 04 382 14 4 Yellow 1200 800 382 28 382 38 8 Grey 50 384 92 50 t
1000 1200 381 05 382 15 5 Green 1200 800 382 29 382 39 9 White Sup
1000 1200 381 06 382 16 6 Blue Letters : black on yellow background
1000 1200 381 07 382 17 7 Purple 100 383 92 Can
1000 1200 381 08 382 18 8 Grey 300 383 30 383 60 A Cap
1000 1200 381 09 382 19 9 White 300 383 31 383 61 B 7m
300 383 32 383 62 C 6m
Letters : black on yellow background 300 383 33 383 63 D Tra
300 381 10 383 00 A 300 383 34 383 64 E
300 381 11 383 01 B 300 383 35 383 65 F For
300 381 12 383 02 C 300 383 36 383 66 G cab
300 381 13 383 03 D 300 383 37 383 67 H
300 381 14 383 04 E 300 383 38 383 68 I cros
300 381 15 383 05 F 300 383 39 383 69 J 10 383 94 0
300 381 16 383 06 G 300 383 40 383 70 K 10 383 95
300 381 17 383 07 H 300 383 41 383 71 L 10 383 96
300 381 18 383 08 I 300 383 42 383 72 M
300 381 19 383 09 J 300 383 43 383 73 N 10 383 97
300 381 20 383 10 K 300 383 44 383 74 O 383 46 Set
300 381 21 383 11 L 300 383 45 383 75 P 1 382 01 0.15
300 381 22 383 12 M 383 17
300 383 46 383 76 Q +1
300 381 23 383 13 N 300 383 47 383 77 R 1 382 02 0.5
300 381 24 383 14 O 300 383 48 383 78 S +1
300 381 25 383 15 P 300 383 49 383 79 T 383 79
381 26 383 16 Q 1 382 03 1.5
300 381 28 300 383 50 383 80 U +1
300 381 27 383 17 R 300 383 51 383 81 V
300 381 28 383 18 S 300 383 52 383 82 W 1 382 04 4 to
300 381 29 383 19 T 300 383 53 383 83 X +1
300 381 30 383 20 U 300 383 54 383 84 Y On-
300 381 31 383 21 V 300 383 55 383 85 Z 1 382 00 With
300 381 32 383 22 W Conventional symbols : black on yellow app
300 381 33 383 23 X background Hei
300 381 34 383 24 Y Met
300 381 35 383 25 Z 300 382 80 382 90 /
300 382 81 382 91 •
Conventional symbols : black on yellow 300 382 82 382 92 +
background 300 382 83 382 93 –
300 381 40 382 70 / 300 382 84 382 94 ±
300 381 41 382 71 • 300 382 85 382 95 =
300 381 42 382 72 + 382 72 300 382 86 382 96 T
300 381 43 382 73 –
300 381 44 382 74 ±
300 381 45 382 75 =
300 381 46 382 76 T
381 43

28

EX29026_24-33 - page 5 Thursday, February 12, 2009 10:56:40 AM

 accessories CAB 3TM marking system CAB 3TM marking system
for wiring and Viking 3 terminal blocks

n Dimensions
Markers
Polyamide 6/6
Cable cross-section (mm ) 2

Dimensions
0.15 to 0.5 0.5 to 1.5 1.5 to 2.5 4 to 6
A (mm) 5 5 5.6 8
384 90 384 92 383 92 + markers B (mm) 5.05 6.4 7.6 9.6
CAB 3

B
C (mm) 3.7 4.3 4.9 7.1
D (mm) 2.3 3 3 3
Ø min./max. (mm) 0.8/2.2 2.2/3 2.8/3.8 4.3/5.3

Cat.Nos 381 50 to 381 55 et 381 60 to 381 65: no liking stud.

D = 6 mm

Marker holders
Cat.No 384 90 Cat.No 384 91 Cat.No 384 92
.3
26
.3
26
383 97
g 1.5 to 2.5 mm2 26
.3
ross-section

B
ps of 25 markers
mm2: strips of 30

ips of 20 markers 382 00 C D

Section of cable for marking (mm )

Accessories CAB 3
2
Pack Cat.Nos Dim. 10 to 16 25 to 35 50 to 70
colour code
Marker-holders A (mm) 18 24.3 27.2
For cables cross-section from 10 mm2 to 70 mm2 B (mm) 8.9 12.2 17.2
Capacity: C (mm) 7 7 10
382 32 8 digits, letters or symbols markers from 0.5 to
1.5 mm2 or 1.5 to 2.5 mm2 cross section
Black, cross-section (mm2) Support for markers Cat.No 383 92
100 384 90 10 to 16
382 26 50 384 91 25 to 35 On cable whith marker-holder Cat.No 384 92
50 384 92 50 to 70 18
Support for markers
10.7

ellow background 100 383 92 Can be clipped on Viking 3 terminal blocks

Capacity:
7 markers from 0.15 to 0.5 mm2
6 markers from 0.5 to 1.5 mm2
5
Transparent applicators
For rapid selection and application of markers onto
cable
For markers Applicator colour for
cross-section (mm2) identification of cross-section
n Characteristics and dimensions of on-site toolbox
10 383 94 0.15 to 0.5 CAB 3 Cat.No 382 00
10 383 95 0.5 to 1.5 CAB 3
10 383 96 1.5 to 2.5 CAB 3 Bottom tray consists of:
10 383 97 4 to 6 CAB 3 • 8 medium slots
(each slot takes 1 box of CAB 3)
383 46 Set of markers • 1 large slot
382 01 0.15 to 0.5 mm2 : 2 500 markers
280

1
+ 10 applicators (250 digits from 0 to 9) Top tray consists of:
• 12 small slots (<=> approx.
1 382 02 0.5 to 1.5 mm2 : 3 000 markers 6 boxes of CAB 3)
+ 10 applicators (300 digits from 0 to 9) • 1 medium slot for applicators
383 79
1 382 03 1.5 to 2.5 mm2 : 3 000 markers Capacity: approx. 15000 CAB 3 markers
+ 10 applicators (300 digits from 0 to 9)
1 382 04 4 to 6 mm2 : 2 000 markers 450
+ 10 applicators (200 digits from 0 to 9) 85
On-site toolbox
1 382 00 With removable tray for CAB 3 markers and
bols : black on yellow applicators, Starfix ferrules… On terminal blocks, On power terminal blocks
Height 85 mm, depth 280 mm, width 450 mm with support Cat.No 383 92
Metal, padlockable

29

EX29026_24-33 - page 6 Thursday, February 12, 2009 10:56:40 AM

 StarfixTM ferrules and crimping tools StarfixTM appl

376 47

376 50 376 66 376 77

377 64

376 87 376 09 + refill 376 43

Example of simple/double fer
on wires

376 43 Cross-section adjustment 376 06

376 39 376 92

Pack Cat.Nos Ferrules with insulating flange Pack Cat.Nos Crimping tools for ferrules in strips
Provide an equipotential link for all the strands Cut and carry out 4-point crimping of ferrules from
of a flexible conductor 0.25 to 6 mm2 in one operation
Active part in tinned electrolytic copper Use recommended for spring connections
Conform to NF C 63-023 Dedicated applicator for each crimping tool for
dispensing strips Pack Cat.No Sta
Simples in strips
For-cables Starfix crimping tool for 0.25 and 0.34 mm2 For
cross-section (mm²) Colour Strips Ferrules cross-sections
500 376 50 0.25 turquoise 10 50 For
1 376 08 Supplied fitted with empty applicator too
500 376 60 0.34 green 12 40
Starfix crimping tool for 0.5 to 2.5 mm2 For
480 376 61 0.5 white 12 40
480 376 62 0.75 blue 12 40 cross-sections 10 376 46
1000 376 63 1 red 25 40 1 376 09 Fitted with an adjustment wheel 10 376 47
1000 376 64 1.5 black 25 40 Supplied fitted with empty applicator 10 376 48
1000 376 66 2.5 grey 25 40 1 376 39 Assorted kit, comprising:
250 376 67 4 orange 10 25 - 1 Starfix crimping tool, Cat. No. 376 09 fitted with
250 376 68 6 green 10 25 empty applicator
- 120 x 0.5 mm2 ferrules
Simples individuals (sachet packing) - 120 x 0.75 mm2 ferrules
500 377 50 0.25 turquoise 5 100 - 240 x 1 mm2 ferrules
500 377 60 0.34 green 5 100 - 320 x 1.5 mm2 ferrules
1000 377 61 0.5 white 10 100 - 200 x 2.5 mm2 ferrules
1000 377 62 0.75 blue 10 100
1000 377 63 1 red 10 100 Starfix crimping tool for 4 and 6 mm2
1000 377 64 1.5 black 10 100 cross-sections
1000 377 66 2.5 grey 10 100 1 376 10 Fitted with an adjustment wheel
250 377 67 4 orange 5 50 Supplied complete with empty applicator
250 377 68 6 green 5 50 Starfix S multi-purpose crimping tool for 0.5 to
Simples individuals (box packing) 2.5 mm2 cross-sections
100 376 69 10 brown 1 376 97 Tool cuts, strips, twists, crimps
100 376 72 (1) 16 white Supplied complete with 5 empty applicators
100 376 70 16 white For left and right-handed persons
50 376 71 25 black
50 376 77 35 red Crimping tool for individual single and
30 376 78 50 blue double ferrules
Doubles individuals Starfix crimping tool for 0.25 to 6 mm2
100/500 376 87 2 x 0.75 blue cross-sections
100/500 376 88 2x1 red For 4-point crimping of ferrules from 0.25 to 6 mm2
100/500 376 89 2 x 1.5 black Use recommended for spring connections
100/500 376 90 2 x 2.5 grey 1 376 06 Crimping tool with disengageable control system,
crimping at end
Large capacity Starfix refills Right or left-handed
Large capacity for less frequent applicator reloading
Translucent packaging Starfix clamp for 10 to 50 mm2 cross-section
For direct mounting on crimping tool Cat.No 376 09 1 376 92 Assorted kit: supplied comprising:
Cross-section Colour Number of ferrules - 1 tool with crimping operation control system for
(mm2) per strip
3 000 376 41 0.5 White 300 individual ferrules 10 to 50 mm2
3 000 376 42 0.75 Blue 300 - 30 individual ferrules 10 mm2
3 000 376 43 1 Red 300 - 20 individual ferrules 16 mm2
3 000 376 44 1.5 Black 300 - 15 individual ferrules 25 mm2
2 500 376 45 2.5 Grey 250 - 10 individual ferrules 35 mm2
- 10 individual ferrules 50 mm2

(1) Short ferrule

Bold pack quantities: Minimum quantities to be ordered
Red catalogue numbers: New products
30

EX29026_24-33 - page 7 Thursday, February 12, 2009 10:56:40 AM

 NEW StarfixTM applicator
StarfixTM applicator

n Correspondence table

Cross-section
(mm2)

376 47 376 81
Large capacity
Ferrule Simple ferrule ferrule - refills Starfix applicator
0.5 376 61 376 41 376 47
0.75 376 62 376 42 376 47
1 376 63 376 43 376 47
1.5 376 64 376 44 376 47
2.5 376 66 376 45 376 47

Example of simple/double ferrules n Dimensions (mm)

on wires
Simple ferrules
Cross-
Example of different wires Cat.Nos section A B C D
and ferrules B (mm2)
376 50 377 50 0.25 8 14.5 1.1 3

D
376 60 377 60 0.34 8 14.5 1.1 3
376 61 377 61 376 41 0.5 8 14.5 1.5 3.4
376 62 377 62 376 42 0.75 8 14.5 1.5 3.4
376 63 377 63 376 43 1 8 14.5 1.7 3.6
376 92 376 64 377 64 376 44 1.5 8 14.5 2 4.1
C

A 376 66 377 66 376 45 2.5 8 14.5 2.6 4.8

376 67 377 67 4 12 21 3.2 5.7
es in strips 376 68 377 68 6 12 23 3.9 7.2
376 69 10 12 21 4.9 8.1
mping of ferrules from 376 72 16 12 23 6.3 9.8
n 376 70 16 18 29 6.3 9.8
connections 376 71 25 18 31 7.9 12
h crimping tool for 376 77 35 18 32 8.9 13.5
Pack Cat.No Starfix applicator 376 78 50 20 36 11.1 16.1

5 and 0.34 mm 2
For Starfix crimping tool
Double ferrules
For dispensing strips of ferrules in Starfix crimping
plicator tools Cat.Nos 376 08/09/10 Cross-section
Cat.Nos A B C D E
For ferrules cross-section (mm²) Colour (mm2)
to 2.5 mm2 A
10 376 46 0.25 et 0.34 yellow 376 87 2 x 0.75 8 15 2.1 6 3.3
D

eel 10 376 47 0.5 à 2.5 red 376 88 2x1 8 15 2.35 6 4

plicator 10 376 48 4 et 6 orange 376 89 2 x 1.5 8 16 2.6 7.2 4.2
376 90 2 x 2.5 10 18.5 3.3 8.4 4.8
No. 376 09 fitted with B
C

n Example of use
Starfix tool
nd 6 mm2

eel
y applicator
mping tool for 0.5 to

ps
pty applicators
sons 2 Adjust The 2-material handle
1 Fit the applicator
gives an excellent grip
ual single and

5 to 6 mm2

es from 0.25 to 6 mm2

connections
able control system,

3 Insert the wire 4 Crimp

0 mm cross-section
2
Starfix S tool
sing:
on control system for
m2
2
2
2
2
2

1 Adjust the cross- 2 Strip and twist 3 Crimp

section

Red catalogue numbers: New products

31

EX29026_24-33 - page 8 Thursday, February 12, 2009 10:56:40 AM

 Catalogue number index

Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pa

371 00 372 09 16 50 375 25 19 10/50 376 62 30 480 381 29 28 300 382 36 28 800
371 00 14 60 10 - 40 27 - 10 63 - 1000 30 - 300 37 - 800
01 - 50 11 - 30 30 - 10 64 - 1000 31 - 300 38 - 800
02 - 40 12 - 40 31 - 10 66 - 1000 32 - 300 39 - 800
03 - 30 20 - 60 32 - 4 67 - 250 33 - 300 70 - 300
04 - 20 21 - 50 34 - 10 68 - 250 34 - 300 71 - 300
05 - 20 40 - 60 35 - 50 69 - 100 35 - 300 72 - 300
07 - 60 41 - 60 40 - 10 70 - 100 40 - 300 73 - 300
08 - 60 42 - 60 42 - 10 71 - 50 41 - 300 74 - 300
09 - 25 43 - 50 44 - 10 72 - 100 42 - 300 75 - 300
20 - 60 44 - 50 46 - 10 77 - 50 43 - 300 76 - 300
21 - 50 46 - 60 47 - 10 78 - 30 44 - 300 80 - 300
30 - 60 47 - 60 50 18 100 87 - 100/500 45 - 300 81 - 300
31 - 50 54 17 60 51 - 20 88 - 100/500 46 - 300 82 - 300
51 - 50 55 - 60 52 - 20 89 - 100/500 50 27 240 83 - 300
52 - 50 56 - 60 53 - 20 90 - 100/500 51 - 240 84 - 300
53 15 20 60 16 60 54 - 20 92 - 1 52 - 240 85 - 300
54 - 20 61 - 50 55 - 20 97 - 1 53 - 240 86 - 300
55 - 60 62 - 50 56 - 20 377 00 54 - 240 90 - 300
56 - 60 63 - 40 57 - 10 377 50 30 500 55 - 240 91 - 300
60 14 60 64 - 10 60 - 20 60 - 500 60 - 240 92 - 300
61 - 50 67 - 60 61 - 10 61 - 480 61 - 240 93 - 300
62 - 40 68 - 50 62 - 10 62 - 480 62 - 240 94 - 300
63 - 30 69 - 50 63 - 10 63 - 1000 63 - 240 95 - 300
64 - 20 70 - 60 65 19 10 64 - 1000 64 - 240 96 - 300
65 - 20 71 - 50 66 - 10 66 - 1000 65 - 240 383 00
66 - 10 72 - 25 67 - 10 67 - 250 382 00 383 00 28 300
67 - 60 73 - 20 68 - 10 68 - 250 382 00 29 1 01 - 300
68 - 60 74 - 15 69 - 10 381 00 01 - 1 02 - 300
69 - 25 79 - 30 75 - 50 381 00 28 1000 02 - 1 03 - 300
70 - 60 80 17 20 76 - 20 01 - 1000 03 - 1 04 - 300
71 - 50 81 - 20 77 - 10 02 - 1000 04 - 1 05 - 300
72 - 40 82 - 20 82 - 20 03 - 1000 10 28 1200 06 - 300
73 - 30 83 - 20 85 - 20 04 - 1000 11 - 1200 07 - 300
74 - 10 84 - 20 86 18 50 05 - 1000 12 - 1200 08 - 300
75 - 10 85 - 20 87 - 50 06 - 1000 13 - 1200 09 - 300
76 - 10 86 - 20 88 - 20 07 - 1000 14 - 1200 10 - 300
77 - 50 374 00 89 - 20 08 - 1000 15 - 1200 11 - 300
78 - 40 374 04 18 10 90 - 20 09 - 1000 16 - 1200 12 - 300
79 - 50 07 - 10 95 - 10 10 - 300 17 - 1200 13 - 300
80 15 20 375 00 96 - 10 11 - 300 18 - 1200
81 - 20 375 01 18 20 376 00 12 - 300 19 - 1200
82 - 20 02 - 50 376 06 30 1 13 - 300 20 - 1200
83 - 20 04 - 20 08 - 1 14 - 300 21 - 1200
84 - 20 05 - 50 09 - 1 15 - 300 22 - 1200
85 - 20 07 - 20 10 - 1 16 - 300 23 - 1200
86 - 20 08 - 20 39 - 1 17 - 300 24 - 1200
87 - 20 10 - 50 41 - 3000 18 - 300 25 - 1200
88 - 20 11 - 20 42 - 3000 19 - 300 26 - 1200
92 - 25 12 - 10 43 - 3000 20 - 300 27 - 1200

372 00 13 - 20 44 - 3000 21 - 300 28 - 1200

372 00 16 60 15 19 10/50 45 - 2500 22 - 300 29 - 1200
01 - 50 16 - 10/50 46 31 10 23 - 300 30 - 800
02 - 50 17 - 10/50 47 - 10 24 - 300 31 - 800
03 - 40 18 - 10/50 48 - 10 25 - 300 32 - 800
04 - 10 21 - 20 50 30 500 26 - 300 33 - 800
07 - 60 22 - 20 60 - 500 27 - 300 34 - 800
08 - 50 24 - 10/50 61 - 480 28 - 300 35 - 800

Bold pack quantities: Minimum quantities to be ordered

Red catalogue numbers: New products
32

EX29026_24-33 - page 9 Thursday, February 12, 2009 10:56:40 AM

Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack Cat.Nos Page No. Pack

1 29 28 300 382 36 28 800 383 14 28 300 383 62 28 300 388 55 26 50 390 73 24 5

30 - 300 37 - 800 15 - 300 63 - 300 56 - 50 74 - 5
31 - 300 38 - 800 16 - 300 64 - 300 57 - 50 394 00
32 - 300 39 - 800 17 - 300 65 - 300 58 - 50 394 45 19 1/10
33 - 300 70 - 300 18 - 300 66 - 300 59 - 50 46 24 5
34 - 300 71 - 300 19 - 300 67 - 300 60 - 50 47 - 5
35 - 300 72 - 300 20 - 300 68 - 300 61 - 25 49 18 10
40 - 300 73 - 300 21 - 300 69 - 300 62 - 25 77 24 10
41 - 300 74 - 300 22 - 300 70 - 300 63 - 25 78 - 10
42 - 300 75 - 300 23 - 300 71 - 300 64 - 25 86 - 5
43 - 300 76 - 300 24 - 300 72 - 300 65 - 25 88 - 5
44 - 300 80 - 300 25 - 300 73 - 300 66 - 25 89 - 5
45 - 300 81 - 300 30 - 300 74 - 300 67 - 20 395 00
46 - 300 82 - 300 31 - 300 75 - 300 68 - 20 395 00 27 1000
50 27 240 83 - 300 32 - 300 76 - 300 69 - 20 01 - 1000
51 - 240 84 - 300 33 - 300 77 - 300 70 - 20 02 - 1000
52 - 240 85 - 300 34 - 300 78 - 300 71 - 20 05 - 1000
53 - 240 86 - 300 35 - 300 79 - 300 72 - 20 06 - 1000
54 - 240 90 - 300 36 - 300 80 - 300 73 - 10 07 - 1000
55 - 240 91 - 300 37 - 300 81 - 300 74 - 10 08 - 1000
60 - 240 92 - 300 38 - 300 82 - 300 75 - 10 09 - 1000
61 - 240 93 - 300 39 - 300 83 - 300 76 - 10 10 - 1000
62 - 240 94 - 300 40 - 300 84 - 300 77 - 10 11 - 1000
63 - 240 95 - 300 41 - 300 85 - 300 78 - 10 15 - 1000
64 - 240 96 - 300 42 - 300 92 29 100 390 00 16 - 1000
65 - 240 383 00 43 - 300 94 - 10 390 10 24 5 17 - 1000

382 00 383 00 28 300 44 - 300 95 - 10 11 - 5 18 - 1000

2 00 29 1 01 - 300 45 - 300 96 - 10 13 - 5 19 - 1000
01 - 1 02 - 300 46 - 300 97 - 10 14 - 5 20 - 1000
02 - 1 03 - 300 47 - 300 384 00 15 - 5 21 - 1000
03 - 1 04 - 300 48 - 300 384 90 29 100 17 - 5 96 18 20
04 - 1 05 - 300 49 - 300 91 - 50 18 - 5 97 - 20
10 28 1200 06 - 300 50 - 300 92 - 50 20 - 5 98 18 10
11 - 1200 07 - 300 51 - 300 388 00 21 - 5 477 00
12 - 1200 08 - 300 52 - 300 388 49 26 100 31 - 5 477 22 18 10
13 - 1200 09 - 300 53 - 300 50 - 100 32 - 5 23 - 10
14 - 1200 10 - 300 54 - 300 51 - 100 33 - 5
15 - 1200 11 - 300 55 - 300 52 - 100 34 - 5
16 - 1200 12 - 300 60 - 300 53 - 100 71 - 5
17 - 1200 13 - 300 61 - 300 54 - 100 72 - 5
18 - 1200
19 - 1200
20 - 1200
21 - 1200
22 - 1200
23 - 1200
24 - 1200
25 - 1200
26 - 1200
27 - 1200
28 - 1200
29 - 1200
30 - 800
31 - 800
32 - 800
33 - 800 In accordance with its policy of continuous improvement, the Company
34 - 800 reserves the right to change specifications and designs without notice.
All illustrations, descriptions, dimensions and weights in this catalogue
35 - 800 are for guidance and cannot be held binding on the Company.

Bold pack quantities: Minimum quantities to be ordered

Red catalogue numbers: New products
33

EX29026_24-33 - page 10 Thursday, February 12, 2009 10:56:40 AM

 Ne
the
Screw o

EX 29026

Headquarters
LEGRAND SNC
87045 Limoges Cedex - France
% : + 33 5 55 06 87 87
Fax : + 33 5 55 06 74 55
www.legrandgroup.com

EX29026_01-07 - page 1 Wednesday, February 11, 2009 4:03:34 PM