Omnitron Systems PoE Switches, Extenders and Media Converters

Comparison Guide for OmniConverter ® and RuggedNet ® PoE Products

OmniConverter and RuggedNet PoE Switches

Overview Key Features
The OmniConverter and RuggedNet PoE product families of 1G Models
switches have models that support copper or fiber uplink ports, ■■ ST, SC, LC fixed fiber ports or Gigabit SFP transceivers
and multiple 10/100/1000BASE-T RJ-45 copper ports with
Power-over-Ethernet (PoE, PoE+, HPoE and IEEE 802.3bt). ■■ Up to two Gigabit SFP or 10/100/1000 RJ-45 uplink ports

The Gigabit PoE switches are available with Gigabit SFP 10G Models
receptacles, fixed fiber connectors or RJ-45 copper uplink ports. ■■ Supports dual 1G or 10G SFP/SFP+ transceivers
The 10Gigabit PoE switches are available with dual SFP ■■ Supports 10M, 100M, 1G and 10Gbps copper SFP/SFP+
receptacles supporting 1Gigabit or 10Gigabit SFP transceivers. transceivers
The PoE switches function as PoE injectors to enable network
Common Switch Features
distance extension with fiber optic cabling and provide power
for up to eight Powered Devices (PDs). ■■ PoE, PoE+, HPoE (60W) and IEEE 802.3bt (60/100W)
The switches feature a Remote PoE Power Reset function ■■ Four or eight 10/100/1000BASE-T RJ-45 PoE ports
that enables the user to remotely power-cycle and reset each ■■ Supports frame sizes up to 10,240 bytes
PD.
■■ Managed models with Web, Telnet, SSH, SNMP and
serial interfaces or unmanaged models
■■ Made in USA

OmniConverter PoE Switches RuggedNet Industrial PoE Switches

OmniConverter compact PoE switches can be wall mounted, RuggedNet compact fiber switches can be wall or rack
rack mounted using a shelf (model 8260-0) or DIN-rail mounted mounted using a wall mount bracket (model 8260-3) and shelf
using DIN-rail mounting clips (model 8251-0). AC/DC power (model 8260-0) or DIN-rail mounted using the included DIN-
adapter is included when ordering an AC model. They are rail mounting clip. They are available with single or dual DC
available with 2-Pin DC terminal or AC/DC 100-240VAC power terminal power options.
adapter.

The OmniConverter 10GPoE+/M, 10GPoEBT/M, GPoE+/M The RuggedNet 10GPoE+/Mi, 10GPoEBT/Mi, GPoE+/Mi
and GHPoEBT/M can be managed via a Web interface, and GHPoEBT/Mi can be managed via a Web interface,
Telnet, SSH, SNMP or Serial Console interface. IP-based Telnet, SSH, SNMP or Serial Console interface. IP-based
web management can be accessed through any of the RJ-45 web management can be accessed through any of the RJ-45
or fiber ports. or fiber ports.
The OmniConverter 10GPoE+/Sx, 10GPoEBT/Sx, GPoE+/Sx The RuggedNet 10GPoE+/Si, 10GPoEBT/Si, GPoE+/Si and
and GHPoEBT/Sx are unmanaged switches with advanced GHPoEBT/Si are unmanaged switches with advanced features
features that can be DIP-switch configured. that can be DIP-switch configured.

Page 1
OmniConverter and RuggedNet PoE Switch Comparison

1 Gigabit PoE Switches

Directed Dual
Max Number of Number of RJ-45 Uplink PoE Alarm DC AC
Models Model # Managed Switch Device Temp
PoE Power Uplink Ports RJ-45 Ports Data Rates Data Rates Reset Contacts Terminal Connector
Mode Mode
1000 fiber
1 or 2 fiber 0 to 50°C
or
GPoE+/Sx 9440 - 9459 or 4 or 8 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
IEEE 2 RJ-45 -40 to 75°C
copper
802.3at
30W 1000 fiber
1 or 2 fiber 0 to 50°C
or
GPoE+/M 9520 - 9539  or 4 or 8 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
2 RJ-45 -40 to 75°C
copper
1000 fiber
IEEE 1 or 2 fiber 0 to 50°C
or
GHPoEBT/Sx 3000B - 3019B 802.3bt or 4 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
60W 2 RJ-45 -40 to 75°C
1G copper
OmniConverter 1000 fiber
IEEE 1 or 2 fiber 0 to 50°C
or
GHPoEBT/Sx 3040B - 3059B 802.3b or 4 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
100W 2 RJ-45 -40 to 75°C
copper
1000 fiber
IEEE 1 or 2 fiber 0 to 50°C
or
GHPoEBT/M 3100B - 3119B 802.3bt  or 4 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
60W 2 RJ-45 -40 to 75°C
copper
1000 fiber
IEEE 1 or 2 fiber 0 to 50°C
or
GHPoEBT/M 3140B - 3159B 802.3bt  or 4 10/100/1000    2-Pin DIN-6 -40 to 60°C
10/100/1000
100W 2 RJ-45 -40 to 75°C
copper
1000 fiber 2-Pin
1 or 2 fiber
or single
GPoE+/Si 9560 - 9579 or 4 or 8 10/100/1000     -40 to 75°C
10/100/1000 or
IEEE 2 RJ-45
copper dual
802.3at
30W 1000 fiber 2-Pin
1 or 2 fiber
or single
GPoE+/Mi 9540 - 9559  or 4 or 8 10/100/1000     -40 to 75°C
10/100/1000 or
2 RJ-45
copper dual
1000 fiber 2-Pin
IEEE 1 or 2 fiber
or single
GHPoEBT/Si 3200B - 3219B 802.3bt or 4 10/100/1000     -40 to 75°C
10/100/1000 or
60W 2 RJ-45
1G copper dual
RuggedNet 1000 fiber 2-Pin
IEEE 1 or 2 fiber
or single
GHPoEBT/Si 3240B - 3259B 802.3bt or 4 10/100/1000     -40 to 75°C
10/100/1000 or
100W 2 RJ-45
copper dual
1000 fiber 2-Pin
IEEE 1 or 2 fiber
or single
GHPoEBT/Mi 3300B - 3319B 802.3bt  or 4 10/100/1000     -40 to 75°C
10/100/1000 or
60W 2 RJ-45
copper dual
1000 fiber 2-Pin
IEEE 1 or 2 fiber
or single
GHPoEBT/Mi 3340B - 3359B 802.3bt  or 4 10/100/1000     -40 to 75°C
10/100/1000 or
100W 2 RJ-45
copper dual

The OmniConverter GHPoEBT/Sx replaces the GHPoE/Sx and is recommended for all new designs.
The OmniConverter GHPoEBT/M replaces the GHPoE/M and is recommended for all new designs.
The RuggedNet GHPoEBT/Si replaces the GHPoE/Si and is recommended for all new designs.
The RuggedNet GHPoEBT/Mi replaces the GHPoE/Mi and is recommended for all new designs.

Page 2
OmniConverter and RuggedNet PoE Switch Comparison

10 Gigabit PoE Switches

Directed Dual
Max Number of Number of RJ-45 Uplink PoE Alarm DC AC
Models Model # Managed Switch Device Temp
PoE Power Uplink Ports RJ-45 Ports Data Rates Data Rates Reset Contacts Terminal Connector
Mode Mode
0 to 50°C
10GPoE+/Sx 9581 2 SFP/SFP+ 4 or 8 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
IEEE -40 to 75°C
802.3at
30W 0 to 50°C
10GPoE+/M 9580  2 SFP/SFP+ 4 or 8 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
-40 to 75°C
IEEE 0 to 50°C
10GPoEBT/Sx 3060B 802.3bt 2 SFP/SFP+ 4 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
10G 60W -40 to 75°C
OmniConverter IEEE 0 to 50°C
10GPoEBT/Sx 3062B 802.3bt 2 SFP/SFP+ 4 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
100W -40 to 75°C
IEEE 0 to 50°C
10GPoEBT/M 3160B 802.3bt  2 SFP/SFP+ 4 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
60W -40 to 75°C
IEEE 0 to 50°C
10GPoEBT/M 3162B 802.3bt  2 SFP/SFP+ 4 10/100/1000 1G or 10G    2-Pin DIN-6 -40 to 60°C
100W -40 to 75°C

2-Pin
10GPoE+/Si 9583 2 SFP/SFP+ 4 or 8 10/100/1000 1G or 10G     -40 to 75°C
IEEE Dual
802.3at
30W 2-Pin
10GPoE+/Mi 9582  2 SFP/SFP+ 4 or 8 10/100/1000 1G or 10G     -40 to 75°C
Dual

IEEE
2-Pin
10GPoEBT/Si 3260B 802.3bt 2 SFP/SFP+ 4 10/100/1000 1G or 10G     -40 to 75°C
Dual
10G 60W
RuggedNet IEEE
2-Pin
10GPoEBT/Si 3263B 802.3bt 2 SFP/SFP+ 4 10/100/1000 1G or 10G     -40 to 75°C
Dual
100W
IEEE
2-Pin
10GPoEBT/Mi 3360B 802.3bt  2 SFP/SFP+ 4 10/100/1000 1G or 10G     -40 to 75°C
Dual
60W
IEEE
2-Pin
10GPoEBT/Mi 3363B 802.3bt  2 SFP/SFP+ 4 10/100/1000 1G or 10G     -40 to 75°C
Dual
100W

Page 3
OmniConverter and RuggedNet PoE Extenders

PoE Extender Overview Key Features

The OmniConverter and RuggedNet PoE Extenders are ■■ Unmanaged 30W and 60W Gigabit PoE Extender with
unmanaged gigabit PoE Extenders that enable the delivery
■■ Multiple port configurations
of Ethernet data and Power over Ethernet (PoE) beyond the
standard 100 meter limit of twisted pair copper cabling. ■■ Can be Powered by IEEE 802.3at or High-Power PoE
60W Power Sourcing Equipment
Utilizing data regeneration and voltage level boosting
capabilities, the PoE Extenders can be daisy chained to ■■ Can Power IEEE 802.3af (15W), 802.3at (30W) or
break through the Ethernet copper distance barrier and 802.3bt (60W) Powered Devices
deliver 10/100/1000 data and power to multiple PoE powered ■■ Voltage-boosting technology to guarantee minimum
devices. voltage requirement to the Powered Device
The PoE Extenders are 10/100/1000BASE-T Ethernet devices ■■ Plug-and-Play installation with auto-negotiation of data
that function as both Powered Devices (PD) and Power rates and duplex modes
Sourcing Equipment (PSE), and require no external AC power.
■■ Made in USA
They feature one PoE/PD port and one or two PoE/PSE ports,
and can be powered by an IEEE 802.3at or High-Power PoE
60W power source.

PoE Extender Comparison

1G PoE Copper Extenders

Max Number of Number of PD/PoE
Models Model # PSE Mode Frame Size Temp
PoE Power PD Ports PoE Ports Data Rates
IEEE
0 to 50°C
GXPoE+/S 2000 802.3at Alternative A 1 1 or 2 10/100/1000 10K
-40 to 60°C
1G 30W
OmniConverter
HPoE 0 to 50°C
GXHPoE+/S 2001 Alternative A 1 1 or 2 10/100/1000 10K
60W -40 to 60°C

IEEE
GXPoE+/Si 2200 802.3at Alternative A 1 1 or 2 10/100/1000 10K -40 to 75°C
1G 30W
RuggedNet
HPoE
GXHPoE+/Si 2201 Alternative A 1 1 or 2 10/100/1000 10K -40 to 75°C
60W

Page 4
OmniConverter PoE Media Converters

Overview Key Features

OmniConverter multi-port media converter models support 100M and 1G Models
PoE (15W), PoE+ (30W), HPoE (60W) and IEEE 802.3bt ■■ ST, SC, LC fixed fiber ports or SFP transceivers
(15/30/60/75/100W).
■■ Supports 1 or 2 fiber ports
OmniConverter media converters are available with DC
power via terminal connectors or external 100 to 240V AC 10G Models
power adapters. They can be installed on any flat surface with ■■ One 1/10G SFP/SFP+ transceiver uplink port
integrated wall-mount brackets, or DIN-rail mounted using an
■■ Supports copper and fiber SFP/SFP+ transceivers
optional DIN-rail mounting kit (model 8250-0).
■■ Copper ports support 10M, 100M, 1G, 2.5G, 5G and 10G
Common Switch Features
■■ Power over Ethernet injector/source
■■ PoE, PoE+, HPoE (60W) and IEEE 802.3bt (60/100W)
■■ One or two RJ-45 PoE ports
■■ Made in USA

OmniConverter /S and /SL models feature one or two OmniConverter /SE models support one or two RJ-45
RJ-45 ports, one or two fiber ports, and provide advanced ports, and one fiber port. The /SE models provide a low-cost
features that can be DIP-switch configured. alternative for applications that do not require advanced
features or two fiber ports. Plug-and-play operation for simple
FPoE/S and FPoE+/S are Fast Ethernet media converters and easy installations.
that provide PoE or PoE+.
FPoE/SE and FPoE+/SE are cost-effective Fast Ethernet
FPoE/SL are cost-effective Fast Ethernet media converters media converters that provide PoE or PoE+.
that provide PoE.
GPoE/SE and GPoE+/SE are cost-effective Gigabit Ethernet
GPoE/S, GPoE+/S and GHPoEBT/S are Gigabit media media converters that provide PoE or PoE+.
converters that provide PoE, PoE+, HPoE (60W) and IEEE
802.3bt (15/30/60/75/100W).

OmniConverter 10G models support one 1/10G SFP/SFP+

uplink port and one or two multi-rate RJ-45 copper port. The
RJ-45 ports support multi rate speeds of 10Mbps, 100Mbps,
1Gbps, 2.5Gbps, 5Gbps and 10Gbps. PoE models support
IEEE 802.3at (15W and 30W) and IEEE 802.3bt (60 and 100W)
per port depending on the model.

*Available in the 2nd half of the year.

Page 5
OmniConverter PoE Media Converter Comparison

OmniConverter PoE Media Converters

Max Number of Number of RJ-45 Fiber Frame Link Fault PoE DC AC
Models Model # Temp
PoE Power Fiber Ports RJ-45 Ports Data Rates Data Rates Size Modes Reset Terminal Connector

0 to 50°C
FPoE/SE 9360 - 9379 1 1 or 2 10/100 100 10K 2-Pin Barrel
-40 to 60°C

0 to 50°C
FPoE/SL 9340 - 9359 IEEE 802.3af 1 or 2 1 or 2 10/100 100 2K   2-Pin Barrel -40 to 60°C
15.4W -40 to 75°C
0 to 50°C
Fast FPoE/S 9300 - 9319 1 or 2 1 or 2 10/100 100 10K   3-Pin Barrel -40 to 60°C
Ethernet -40 to 75°C
2-Pin
0 to 50°C
FPoE+/SE 9380 - 9399 1 1 or 2 10/100 100 10K or Barrel
-40 to 60°C
IEEE 802.3at 3-Pin
30W 0 to 50°C
FPoE+/S 9320 - 9339 1 or 2 1 or 2 10/00 100 10K   3-Pin Barrel -40 to 60°C
-40 to 75°C
2-Pin
0 to 50°C
GPoE/SE 9460 - 9479 1 1 or 2 10//100/1000 1000 10K or Barrel
-40 to 60°C
IEEE 802.3af 3-Pin
15.4W 0 to 50°C
GPoE/S 9400 - 9419 1 or 2 1 or 2 10//100/1000 100 or 1000 10K   3-Pin Barrel -40 to 60°C
-40 to 75°C
2-Pin
0 to 50°C
GPoE+/SE 9480 - 9499 1 1 or 2 10//100/1000 1000 10K or Barrel
-40 to 60°C
Gigabit IEEE 802.3at 3-Pin
Ethernet 30W 0 to 50°C
GPoE+/S 9420 - 9439 1 or 2 1 or 2 10//100/1000 100 or 1000 10K   3-Pin Barrel -40 to 60°C
-40 to 75°C
0 to 50°C
IEEE 802.3bt
GHPoEBT/S 9500B - 9519B 1 or 2 1 or 2 10//100/1000 100 or 1000 10K   3-Pin Barrel -40 to 60°C
60W
-40 to 75°C
0 to 50°C
IEEE 802.3bt
GHPoEBT/S 9150B - 9169B 1 or 2 1 or 2 10//100/1000 100 or 1000 10K   3-Pin Barrel -40 to 60°C
100W
-40 to 75°C
Multi-Rate 0 to 50°C
IEEE 802.3at
10GPoE+/S 9191 1 1 or 2 10/100/1000/ 1G or 10G 10K  2-Pin Barrel -40 to 60°C
30W
2.5G/5G/10G -40 to 75°C
Multi-Rate Barrel 0 to 50°C
10G IEEE 802.3bt
10GPoEBT/S 9192B 1 1 or 2 10/100/1000/ 1G or 10G 10K  2-Pin or -40 to 60°C
Ethernet* 60W
2.5G/5G/10G DIN -40 to 75°C
Multi-Rate Barrel 0 to 50°C
IEEE 802.3bt
10GPoEBT/S 9194B 1 1 or 2 10/100/1000/ 1G or 10G 10K  2-Pin or -40 to 60°C
100W
2.5G/5G/10G DIN -40 to 75°C

*Available in the 2nd half of the year.

The OmniConverter GHPoEBT/S replaces the GHPoE/S and is recommended for all new designs.

Page 6
OmniConverter and RuggedNet Mounting Options
OmniConverter Wall Mount
The OmniConverter can be wall mounted using the mounting holes on the integrated mounting brackets.

RuggedNet Wall/Rack Mount Plate

The wall mount plate (8260-3) is used to wall or rack mount any RuggedNet switch and extender.

Rack Mount Shelf

The 1U 19” rack mount shelf (8260-0) accommodates RuggedNet switches, RuggedNet extenders, OmniConverter switches,
OmniConverter media converters and copper extenders. RuggedNet modules will need to have the wall mount plate
(8260-3) installed in order to rack mount the modules.

DIN-Rail Mounting
The DIN-Rail mounting clips (8251-0) accommodate any Omnitron product with wall mount brackets. The DIN Rail mounting
clip attaches to the wall mount brackets on the module, allowing any wall mount module to be DIN Rail mounted.

The DIN-Rail mounting bracket (8250-0) provides DIN Rail capabilities for OmniConverter media converters. This kit contains
all the necessary components to provide DIN Rail mounting for several different mounting orientations.

The RuggedNet switches and extenders can be DIN-rail mounted using the included DIN-rail mount bracket.

©2022 Omnitron Systems Technology, Inc. RuggedNet and OmniConverter are registered trademarks of Omnitron Systems Technology, Inc.
Other trademarks are owned by their respective companies. Specifications subject to change without notice. All rights reserved.

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 38 Tesla, Irvine, CA USA 92618

091-19XXX-001I 2/22 Page 7