1

CSS NC2
Computer
System Servicing

1
2

CSS NC2 Step:

 Format first your Server Computer System Unit using Server 2008 Standard
 And your Client 1 Computer System Unit using Windows7 Ultimate
 Create 2 partition
ex: Drive C: for your O.S
Drive D: for your BackUp Files
 Prepare and arrange your cabling Straight through wire (note: Memorize & Follow the CSS
Block Diagram )

SERVER & CLIENT Setting up TIME & DATE and CHANGE the name of
the SERVER:
Focus to Server:
 Right click on the right side of Taskbar> Then click Adjust Date/Time> and click the Change
Date and Time…> after you change the date today click OK> and Click the CHANGE TIME
ZONE… Button> and Set Beijing, Chongqing, Hong kong, Urumqi> and Click OK> and OK.
 and left Click on START MENU> right click COMPUTER> Click Properties> Click Change
Settings> click the Change... Button> from Computer name: Type new name and Click OK>
and Computer was requesting To RESTART> restart it and you may now Start your Work

Focus to Client:
 Right click on the right side of Taskbar> Then click Adjust Date/Time> and click the Change
Date and Time…> after you change the date today click OK> and Click the CHANGE TIME
ZONE… Button> and Set Beijing, Chongqing, Hong kong, Urumqi> and Click OK> and OK.

Focus to CLIENT:
 First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Click WINDOWS FIREWALL > then Click TURN WINDOWS FIREWALL ON OR
OFF > make it sure your HOME/ PRIVATE NETWORK CONNECTION is TURN ON
and
> PUBLIC NETWORK CONNECTION is TURN ON.
> And click BACK button
 Then click ALLOW PROGRAMS OR FEATURE THROUGH WINDOWS FIREWALL
 Check the following box: 1. File and Printer Sharing
 2. Network Discovery
 3. Remote Desktop
 4. Windows Firewall Remote Management
 5. Windows Remote Management

2
3

ROUTER CONFIGURATION using CLIENT SystemUnit:

 First RESET your ROUTER in 10 Sec. observed the light when blink.
 After you reset the ROUTER Turn OFF and ON the power button
 Then click START MENU > RUN > type CMD
 Type ipconfig > then it will appear the DEFAULT GATEWAY of your ROUTER >
 Then open your Browser (ex: Google, IE) > then type in ADDRESS BAR the
DefaultGateway of your ROUTER > then type USERNAME & PASSWORD (you will
see below in your ROUTER Devices ) > then click OK.
 DISABLE the WIFI of your ROUTER DEVICES > click Save > then Reboot to change
 from Network/ Local Connection type your given DEFAULT GATEWAY in IP Address
(ex: Default of Router ip: 192.168.0.1 > change the IP ADDRESS of your Default
Gateway ex: 192.168.10.10 )
 Note: Make it sure the default gateway is not the same and used by other
Devices, To avoid error internet connection.

ACCESS POINT CONFIGURATION using CLIENT SystemUnit:

 Direct first your Straight Though cable from A.P to CLIENT to configured
 then RESET your A.P in 10 Sec. observed the light when blink.
 After you reset the A.P Turn OFF and ON the power button
 Then click START MENU > RUN > type CMD
 Type ipconfig > then it will appear the DEFAULT GATEWAY of you’re A.P >
 Then open your Browser (ex: Google, IE) > then type in ADDRESS BAR the
DefaultGateway of you’re A.P > then type USERNAME & PASSWORD (you will see
below in you’re A.P Devices ) > then click OK.
 ENABLE the WIFI of you’re A.P DEVICES > Label you’re Wifi A.P Devices (ex:APWifi1)>
Type password(ex: Admin12@)> click Save > then Reboot to change
 from Network/ Local Connection type your given DEFAULT GATEWAY in IP Address
(ex: Default of A.P ip: 192.168.0.254 > change and copy the IP ADDRESS of your
Default Gateway ROUTER into A.P ex: 192.168.10.10 )
 then TURN OFF or DISABLE the DHCP > click Save > then Reboot to change
 Note: Make it sure the default gateway of you’re A.P is the same to the
ROUTER, ENABLE your Wifi, and DISABLE the DHCP of you’re A.P.
 Remove and Back your Straight Though cable from A.P to HUB.

3
4

Focus to SERVER:
 First Right click on your COMPUTER > then PROPERTIES > click CHANGE
SETTINGS > then click CHANGE Button > from computer name type: SERVER1
>Click ok > then close to Reboot/Restart your Server.
 Login first (Username: Administrator)(Password: Admin12@)

 First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Click WINDOWS FIREWALL > then Click TURN WINDOWS FIREWALL ON OR
OFF > make it sure your HOME/ PRIVATE NETWORK CONNECTION is TURN ON
and
> PUBLIC NETWORK CONNECTION is TURN ON.
> And click BACK button
 Then click ALLOW PROGRAMS OR FEATURE THROUGH WINDOWS FIREWALL
 Check the following box: 1. File and Printer Sharing
 2. Network Discovery
 3. Remote Desktop
 4. Windows Firewall Remote Management
 5. Windows Remote Management

CREATING STATIC I.P Address of SERVER:

 First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Then Click CHANGE ADAPTER SETTINGS > from LOCAL AREA CONNECTION
Right Click > then PROPERTIES > uncheck the BOX (TCP/IPv6) > then click
(TCP/IPv4) > then Click PROPERTIES Button.
 choose Use the Following IP address type ip(ex: I.P ADRESS: 192.168.10.5) automatically
will appear when you click (SUBNET MASK:255.255.255.0) you will type the
I.P of your ROUTER (DEFAULTGATEWAY:192.168.10.10)
 from Use the following DNS server addresses type the ip of your SERVER in (ex:
PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
 Once you change or type the I.P Address > Right Click DISABLE & ENABLE.
 Open your CMD > then type ipconfig > you will see the I.P address you created was
saved.
 Ping your Server connection In CMD > type > ping I.P of Server (ex: ping
192.168.10.10) note: make it sure the RESULT will be 0% lost- means your connection is
good
Peer to Peer SERVER to CLIENT
 After that Try to ping your CLIENT using your SERVER connection In CMD > type >
ping I.P of Client (ex: ping 192.168.10.15) note make it sure the RESULT will be 0% lost-
means your connection is good from CLIENT

4
5

CREATING STATIC D.N.S Address of Client

 First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Then Click CHANGE ADAPTER SETTINGS > from LOCAL AREA CONNECTION
Right Click > then PROPERTIES > uncheck the BOX (TCP/IPv6) > then click
(TCP/IPv4) > then Click PROPERTIES Button.
 from Use the following DNS server addresses type the ip of your SERVER in (ex:
PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
 Once you change or type the D.N.S Address > Right Click DISABLE & ENABLE.
 saved.
 Ping your Client connection In CMD > type > ping I.P of Client (ex: ping
192.168.10.15) note make it sure the RESULT will be 0% lost- means your connection is
good
Peer to Peer CLIENT to SERVER
 After that Try to ping your SERVER using your CLIENT connection In CMD > type >
ping I.P of Server (ex: ping 192.168.10.5) note make it sure the RESULT will be 0% lost-
means your connection is good from SERVER.

Focus to SERVER:
5
6

Starting Creating ROLES in SERVER MANAGER

1st role & 2ND role
 Open SERVER MANAGER > Click ROLES > then click ADD ROLES
 Check the box [√] ACTIVE DIRECTORY DOMAIN SERVICES
 Click NEXT > NEXT > then click INSTALL > then FINISH (note: don’t close
button).
 Click start > RUN > then type dcpromo > click Next > Next > then choose the
Second Radio Button [*] Create domain a new forest.
 Then click NEXT button > Create your own DOMAIN (ex: Paul.com)
 Choose WINDOWS 2000 > NEXT > choose WINDOWS 2000 NATIVE.
 Make it sure the box of DNS server is check [√] >NEXT > YES > click NEXT >
then Create PASSWORD: Admin12@ > then NEXT > NEXT > Finish > the
Computer will RESTART NOW> then Login when CSU resume to open.

3rd role
 Open SERVER MANAGER > Click ROLES > then click ADD ROLES
 Check the box [√] DHCP
 Click NEXT > NEXT > Click VALIDATE Button and will appear the CHECK
VALID icon. > then NEXT > click NEXT again > then Click ADD button type the
Following Ex: Scope name: Scope_1
Starting IP: 192.168.10.20
Ending IP: 192.168.10.30
SubnetMask: 255.255.255.0
DefaultGateway: 192.168.10.10
 OK >Click NEXT > then choose DISABLE the IPv6 the second RadioBox > Next >
Next again > Click then INSTALL > Close
 Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Then Click MANAGE NETWORK CONNECTIONS > from LOCAL AREA
CONNECTION Right Click > then PROPERTIES > then click (TCP/IPv4) > then Click
PROPERTIES Button.
 from Use the following DNS server addresses change the ip of your SERVER from
127.0.0.1 into (ex: PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
 Once you change or type the I.P Address > Right Click DISABLE & ENABLE.

4th role

6
7

 Open SERVER MANAGER > Click ROLES >from Right Side click FILE
SERVICES with >click FILTER EVENTS > uncheck the BOX [] ERROR
[] WARNING
 Click OK > Scroll Down > click ADD ROLE SERVICES > Check th BOX [√]
FILE SERVER RESOURCE MANAGER > Next > then select/ check the BOX
[√] Local Disk (C:) > click Next > Next again > Install > then CLOSE button.

5th role
 Open SERVER MANAGER > Click ROLES > then click ADD ROLES
 Check the BOX[√] Print Services > NEXT button > check the box [√] Print Server >
Next > Install > then CLOSE button > CLOSE ALL WINDOWS.

7
8

Still Focus to SERVER: for DNS

 Open SERVER MANAGER > Click Positive sign of [+]ROLES

 Click Positive sign of [+]DNS SERVER > Click Positive sign of [+]DNS >
 Click Positive sign the Computer name of your Server ex: [+]SERVER1 >
 Click Positive sign of [+]FORWARD LOOKUP ZONES >
 > Click the name of your Domain ex: Paul.com > from Right Side > Right Click the
name of your Server ex: server1 > then PROPERTIES> check the BOX [√]
Update Associated Pointer (PTR) record > then click OK
 Click REVERSE LOOKUP ZONES > then Right Click > NewZone > Click NEXT
button > NEXT > NEXT > type IP ADDRESS from Network ID: 192.168.10. >
 Click NEXT > NEXT > then Click FINISH
 Click below from ReverseLookUpZones IP ADD. You created > then RightClick >
 Select New Pointer (PTR) > then type the last digit IP ADDRESS of your SERVER
from ex: HOST IP ADDRESS: 192.168.10.5 >
 Click the BROWSE Button > Click the computer name of your Server ex:SERVER1
 Click arrow down and choose From Record Types: ALL RECORDS >
 Then go back to Double Click the Comp. name of server SERVER1 > Double Click the
FORWARD LOOK UP ZONES > Double Click the name of your Domian ex:
Paul.com > Select the (Same As Parent Folder) > then Click OK > OK
 Repeat again go to REVERSE LOOKUP ZONES > then Right Click > NewZone >
Click NEXT button > NEXT > NEXT > type IP ADDRESS from Network ID: 127.0.0.
>
 Click NEXT > NEXT > then Click FINISH
 Click below from ReverseLookUpZones IP ADD. You created > then RightClick >
 Select New Pointer (PTR) > then type the last digit IP ADDRESS ex: HOST IP
ADDRESS: 127.0.0.1 >
 Click the BROWSE Button > Click the computer name of your Server ex:SERVER1
 Click arrow down and choose From Record Types: ALL RECORDS >
 Then go back to Double Click the Comp. name of server SERVER1 > Double Click the
FORWARD LOOK UP ZONES > Double Click the name of your Domian ex:
Paul.com > Select the (Same As Parent Folder) > then Click OK > OK

8
9

Still Focus to SERVER: Creating 2 Organizational Unit and 4 User Accounts

 START MENU > ADMINISTRATIVE TOOLS > Click the ACTIVE DIRECTORY
USERS and COMPUTERS > on yourDomain Name ex: Paul.com Right
click> then NEW >select ORGANIZATIONAL UNIT > TYPE name:
AdminDepartment > then Uncheck the box > click OK
 Click the USERS folder icon > from Right Side > Right Click to Administrator then >
Copy > type a 1st USER ACCOUNT- Firstname: a1 > Next
 Check the 3rd BOX[√] Password Never Expires Type the PASSWORD:
Admin12@ & CONFIRM PASSWORD: Admin12@
 Click the USERS folder icon > from Right Side > Right Click to Administrator then >
Copy > type a 2nd USER ACCOUNT- Firstname: b1> Next
 Check the 3rd BOX[√] Password Never Expires Type the PASSWORD:
Admin12@ & CONFIRM PASSWORD: Admin12@
 Select the a1 and b1 > then Drag to first O.U that you created a AdminDepartment >
click YES Button.
 From your Domain Name ex: Paul.com Right click> > then NEW >select
ORGANIZATIONAL UNIT > TYPE 2nd O.U. name: ItDepartment > then Uncheck the
box > click OK
 Click the USERS folder icon > from Right Side > Right Click to Administrator then >
Copy > type a 3rd USER ACCOUNT- Firstname: c1 > Next
 Check the 3rd BOX[√] Password Never Expires Type the PASSWORD:
Admin12@ & CONFIRM PASSWORD: Admin12@
 Click the USERS folder icon > from Right Side > Right Click to Administrator then >
Copy > type a 4th USER ACCOUNT- Firstname: d1> Next
 Check the 3rd BOX[√] Password Never Expires Type the PASSWORD:
Admin12@ & CONFIRM PASSWORD: Admin12@
 Select the c1 and d1 > then Drag to Second O.U that you created a ItDepartment > click
YES Button. CLOSE WINDOWS.

9
10

Still Focus to SERVER:CREATING REDIRECTION FOLDER in DRIVE C:

For Admin Department

 Start Menu> Click COMPUTER > go to/ open Local Disk(C:)
 Right Click > New > FOLDER > then Type the folder name REDIRECTION
 From REDIRECTION > Right Click > New > FOLDER > then Type the folder name
AdminDepartment then Click PROPERTIES > select SHARING tab > Click
ADVANCED SHARING BUTTON > Check the BOX [√]SHARE THIS
FOLDER > then Click PERMISSIONS Button > Click Everyone > then click REMOVE
button to remove the Everyone >
 Click ADD Button > then Type au > then Click CHECK NAME Button > Click OK >
 Select Authenticated Users then check all BOX [√]ALLOW > Apply > OK > then Apply
> then OK
 Go to SECURITY tab > then click EDIT > Click ADD Button > type au > click CHECK
NAME Button > Click OK >
 Select Authenticated Users then check all BOX [√]ALLOW >Apply > OK >
 Back to Sharing tab> copy the NETWORK PATH ex: \\Server1\AdminDepartment >
 Then click CLOSE Button

For IT Department
 Start Menu> Click COMPUTER > go to/ open Local Disk(C:)
 Right Click > New > FOLDER > then Type the folder name REDIRECTION
 From REDIRECTION > Right Click > New > FOLDER > then Type the folder name
ItDepartment then Click PROPERTIES > select SHARING tab > Click ADVANCED
SHARING BUTTON > Check the BOX [√]SHARE THIS FOLDER > then
Click PERMISSIONS Button > Click Everyone > then click REMOVE button to remove
the Everyone >
 Click ADD Button > then Type au > then Click CHECK NAME Button > Click OK >
 Select Authenticated Users then check all BOX [√]ALLOW > Apply > OK > then Apply
> then OK
 Go to SECURITY tab > then click EDIT > Click ADD Button > type au > click CHECK
NAME Button > Click OK >
 Select Authenticated Users then check all BOX [√]ALLOW >Apply > OK >
 Back to Sharing tab> copy the NETWORK PATH ex: \\Server1\ItDepartment >
 Then click CLOSE Button

10
11

Still Focus to SERVER: for GROUP POLICY MANAGEMENT

 Click START MENU > ADMINISTRATIVE TOOLS > Click GROUP POLICY
MANAGEMENT.
 Click Positive sign of Forest ex: [+]FOREST:Paul.com
 Click Positive sign of Domains ex: [+]DOMAINS
 Click Positive sign of Name of your Domain ex: [+]Paul.com
 Select the first O.U that you created ex: [+]AdminDepartment > RightClick > select
CREATE A GPO IN THIS DOMAIN, AND LINK IT HERE… > then type New Group
Policy Object 1 > then Click OK button
 Will appear the GPO you created below of AdminDepartment >
 Right click in New Group Policy Object 1> then Click ENFORCED to check >
 Then click the New Group Policy Object 1> and from Right Side Select DELEGATION
tab > Select Authenticated Users > then click ADVANCED Button > Select Authenticated
Users again > then check all BOX [√]ALLOW>
 Click Apply button > OK
 Right click again in New Group Policy Object 1> then Click EDIT >
 Click the Positive Sign of User Configuration ex: [+]USER CONFIGURATION
 Click the Positive Sign of Policies ex: [+]POLICIES
 Click the Positive Sign of Windows Settings ex: [+]WINDOWS SETTINGS
 Click the Positive Sign of Folder Redirection ex: [+]FOLDER REDIRECTION
 Right Click in DESKTOP > PROPERTIES
 From TARGET tab > click arrow down of Setting: not configured
 Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
 From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\AdminDepartment
 Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK
 From FOLDER REDIRECTION again > Right Click in DOCUMENT > PROPERTIES
 From TARGET tab > click arrow down of Setting: not configured
 Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
 From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\AdminDepartment
 Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK, then CLOSE WINDOWS

Note: after creating 1st GPO you will create again another 2nd GPO, the procedure are the
same only from first GPO, follow the STEP again.

11
12

 Select the second O.U that you created ex: [+]ItDepartment > RightClick > select
CREATE A GPO IN THIS DOMAIN, AND LINK IT HERE… > then type New Group
Policy Object 2 > then Click OK button
 Will appear the GPO you created below of ItDepartment >
 Right click in New Group Policy Object 2> then Click ENFORCED to check >
 Then click the New Group Policy Object 2> and from Right Side Select DELEGATION
tab > Select Authenticated Users > then click ADVANCED Button > Select Authenticated
Users again > then check all BOX [√]ALLOW>
 Click Apply button > OK
 Right click again in New Group Policy Object 2> then Click EDIT >
 Click the Positive Sign of User Configuration ex: [+]USER CONFIGURATION
 Click the Positive Sign of Policies ex: [+]POLICIES
 Click the Positive Sign of Windows Settings ex: [+]WINDOWS SETTINGS
 Click the Positive Sign of Folder Redirection ex: [+]FOLDER REDIRECTION
 Right Click in DESKTOP > PROPERTIES
 From TARGET tab > click arrow down of Setting: not configured
 Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
 From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\ItDepartment
 Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK
 From FOLDER REDIRECTION again > Right Click in DOCUMENT > PROPERTIES
 From TARGET tab > click arrow down of Setting: not configured
 Then choose BASIC- REDIRECT EVERYONE’S FOLDER TO THE SAME
LOCATION >
 From TARGET FOLDER LOCATION > paste in ROOT PATH that you copy in
NETWORK PATH ex: RootPath:\\Server1\ItDepartment
 Then go to SETTINGS tab > uncheck the ALL Three BOX > Click APPLY > YES
>then OK, then CLOSE WINDOWS

12
13

Still Focus to SERVER: for FEATURES Windows Back-Up

 Open SERVER MANAGER > Click FEATURES > Click ADD FEATURES >
 Select the BOX [◘]Windows Server Backup Features > click NEXT > Install >
then Click CLOSE Button
 Then Close all windows

Focus to CLIENT: Joining a DOMAIN

 First Right click on your internet icon and click OPEN NETWORK AND SHARING
CENTER.
 Then Click CHANGE ADAPTER SETTINGS > from LOCAL AREA CONNECTION
Right Click > then PROPERTIES > then click (TCP/IPv4) > then Click PROPERTIES
Button.
 choose Use the following DNS server addresses type the ip of your SERVER in (ex:
PREFERRED DNS SERVER: 192.168.10.5) > then click OK > Click OK
 After you type the IP ADD. Right Click Local Area connection DISABLE then ENABLE
| Note: you must need to do that to Refresh the I.P ADDRESS of CLIENT
 Click START MENU > Right Click from COMPUTER > then Properties
 Click CHANGE SETTINGS > Click CHANGE Button > Choose and Select DOMAIN >
then type the name of your domain ex: DOMAIN: Paul.com >
 Click OK > then Type the Username & Password > click OK > the computer will
request to RESTART > Click Close button then RESTART NOW > the computer will
resume to open.

Focus to CLIENT: Login a USER ACCOUNT & FILE SHARING

 Click Start Menu > then Click SWITCH USER > click Other Account
 Type the USERNAME and PASSWORD that you Created in server ex:
Username: a1 || Password: Admin12@
 On DESKTOP > Right Click Create NEW FOLDER > then Rename FILE SHARING
A1 > Inside of FILE SHARING A1 Folder > Right Click Create Text Document then
type your information ex: Full Name, Age,
Birthday, Birth Place, and type CSS NC2.
Note: Using Computer of SERVER you can see now the File Sharing Folder that you created
from CLIENT.

13
14

Focus to SERVER: INSTALLING PRINTER SHARING

 First connect your Printer to Server> then install drivers of Printer >
 Go to ADMINISTRATIVE TOOLS > Click PRINT MANAGEMENT >
 Click positive sign of [+]PRINT SERVERS > Click positive sign of computer name
[+]SERVER1(Local) > Click PRINTERS > Right Click on brand name of PRINTER >
 Click MANAGE SHARING > then Check the BOX [√]SHARE THIS PRINTER > Click
APPLY > then OK Button

Focus to CLIENT: PRINTER SHARING

 First Click START MENU > Click COMPTER > From LEFT SIDE Click NETWORK >
 Then open the Compter name of your SERVER > Right Click on the Brand of Printer Device
ex: EPSON L360 Series > then Click CONNECT
 And now you can try to TEST the PRINTER SHARING using your CLIENT

For REMOTE DESKTOP CONNECTIONS:

This step are same procedure both SERVER or CLIENT Computer System Unit

 Click Start Menu > Right Click from COMPUTER >

 Then PROPERTIES > Click CHANGE SETTINGS then>
 Click REMOTE Tab> Choose the radio button in Second Box
[ ] Don’t ……
[• ] Allow Connections from Computers running any version of Remote
Desktop (less secure)
[ ] Allow …….
 Click OK > then Click APPLY Button > OK Button >
 Click Start Menu> Search REMOTE DESKTOP CONNETIONS >
 From COMPUTER:_______ type the I.P ADDRESS that you want to REMOTE to
Control the Computer > then Connect > Enter USERNAME & PASSWORD >
 Click Yes > then OK.

Focus to SERVER & CLIENT for NS LOOKUP

Note: Do it on Server and Client

Forward Ns Look Up From SERVER

 Click Start Menu> Search CMD Click> and type nslookup> ENTER and Type The IP
of the SERVER> Ex.> 192.168.10.2 if client Ex.>192.168.10.4>
Backward Ns Look Up From CLIENT

 Click Start Menu> Search CMD Click> and type nslookup> ENTER and Type The IP
of the CLIENT> Ex.> 192.168.10.4 if server Ex.>192.168.10.2>

14
15

Focus to SERVER: STORAGE for BACK UP and RESTORE

“BackUp”
 Click Server Manager > click Positive sign of Storage ex: [+]Storage >
 Click WINDOWS SERVER BACKUP > Click in right side the BACKUP ONCE >
 Click Next > Select the first Radio Button [•]FULL SERVER (Recommended) > NEXT
 Select the first Radio Button [•]LOCAL DRIVES > NEXT > Click YES >
 Select the first Radio Button [•]VSS COPY BACKUP (RECOMMENDED)> NEXT > then
Click BACKUP button> wait until to finish Bakcup 100% > click CLOSE button.

“Restored”
 Click Server Manager > click Positive sign of Storage ex: [+]Storage >
 Click WINDOWS SERVER BACKUP > Click in right side the RECOVERY >
 Select first Radio Button ex: [•]THIS SERVER (SERVER1) Click NEXT > NEXT > NEXT >
Click Positive sign of SERVER computer name ex: [+]Server1 >
 Then Select LOCAL DISK (C:) to Back Up all > NEXT > OK > Click BROWSE
Button > Click Positive sign of Coputer ex: [+]COMPUTER > then Choose LOCAL
DISK (D:) for Restoring Files Destination > Click OK > NEXT> RECOVER > Click
CLOSE Button > Close Wndows
Note: after back up & Restoring a FILES you can see to DRIVE (D:)

Note: After All Don’t forget Back to WORKGROUP your CLIENT.

Proper Shutdowns of your Computer System Unit. And
Keep leave clean your Work Station Area

Success Congratulations! God Bless!

Sir. Michael Paul G. Buraga
Sir. Rommel T. Noda
IT John Philip Laon
IT Jhon Maynard M. Kumar

15