Scribd
Upload
186 views

Ecu Sensor Simulation mst9000 Instruction

This document describes an OBD2 diagnostic tool that can: - Simulate engine, transmission, ABS, and other vehicle sensor signals. - Drive actuators like injectors, solenoid valves, motors. - Output engine speed, camshaft, transmission signals and more. - Configure waveforms using included software to simulate various vehicle models. - Diagnose sensors, test engine/transmission/ABS systems, and more for automotive repair.

Uploaded by

Jorge Espino
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
186 views

Ecu Sensor Simulation mst9000 Instruction

This document describes an OBD2 diagnostic tool that can: - Simulate engine, transmission, ABS, and other vehicle sensor signals. - Drive actuators like injectors, solenoid valves, motors. - Output engine speed, camshaft, transmission signals and more. - Configure waveforms using included software to simulate various vehicle models. - Diagnose sensors, test engine/transmission/ABS systems, and more for automotive repair.

Uploaded by

Jorge Espino
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

www.obd2express.co.

uk

PLEASE READ FIRST

(NEW 2011 VERSION)

Main features:
engine control system, the user can set different types of crankshaft independent

Signal output (for all models of the computer-driven)


automatic transmission input and output shaft signal simulation
pin connector commonly used automatic computer tips
directly into the waveform data set
crankshaft computer automatically set the signal waveform data
time to test the independent six-channel injection
engine speed signal output
speed signal output (Hall signal, magnetic signal)
three, four-channel ABS wheel speed signal output
diesel electronic control system testing
EGR solenoid valve driven
electromagnetic valve clearance of carbon cans
speed table-driven
driven blower control module
idle valve driver
12V \ 24V stepper motor drive (four-, six-lane)
12V \ 24V servo motor drive
injector drive
driven hydraulic solenoid valve
ignition module drive
www.obd2express.co.uk
parking sensor (ultrasonic) sensor-driven
Automatic Shift Valve Driver
Shift Quality Valve Drive
hydraulic valve driver
water temperature, intake air temperature, outdoor temperature, evaporation
temperature sensor signal simulation box
oxygen sensor signal simulation (manual)
oxygen sensor signal simulation (auto signal)
throttle signal simulation
Simulation of carbon can remove the solenoid valve
EGR solenoid valve analog
air flow meter, air pressure sensor (analog, digital) signal simulation
Simulation of the ignition coil
Simulation Injector
idle speed stepper motor simulation (four-, six-lane)
A \ C relay simulation
pump relay simulation
radiator fan relay simulation
audio signal output, power amplifier driver
automatic transmission shift valve, shift quality valves, hydraulic control valve
simulation
fuel injection pulse width measurement
Central locking server simulation
burglar resistance simulation
all of the output signal overload protection
High-Power 5V \ 12V \ 24V voltage output
user extensions

Instrument specific parameters:


output waveform can be set: five-channel arbitrary waveform output settings,
which can crank out 1 º angle signal, the signal sub-cylinder, 1 cylinder TDC signal,
cam signal, the phase accuracy. Models for all the world's crankshaft, camshaft
signal simulation; also applies to all the world's automatic transmission input and
output shaft signal simulation; ABS three, four-channel wheel speed signal
simulation; computer settings waveform, the network lifetime free upgrades, At the
same time long-wave data can be stored within the memory;

Output: magnetic signals, the Hall signal, optical signal;

actuator drive: drive current 3A, 1% ~ 99% duty cycle continuous adjustment,
continuously adjustable frequency;

sensor signal simulation: resistance 100Ω ~ 10000Ω voltage 0V ~ 5V × 3


www.obd2express.co.uk
0V ~ 1V

simulation-driven actuator: 54 simultaneous output channels

stepper motor drive: current 1A, applicable to all vehicles with four lines, six lines
(12V \ 24V) stepper motor drive;

Output current: 5V-5A \ 12V-5A \ 24V-3A

Device can be used:


Dynamic diagnosis of automotive sensors, automotive engine, transmission, ABS,
air conditioning, anti-theft and other computer repair, car model-driven teaching
aids, research and development in automobile production;
This instrument applies to Germany, the United States, Japan, Korea,
China-made mini-cars and dozens of thousands of vehicles;

Instrument Packing List:


sensor signal simulation expert Gold Edition 1 set
write waveform data line 1
Power Line 1
Wave Connection 3
a computer data disc
instrument manual 1
signal simulation-driven data line

About the control panel:


Injector and fuel injection time measurement simulation
INJ1: a tank of fuel injector and fuel injection time (ms)
INJ2: two-cylinder fuel injector and fuel injection time (ms)
INJ3: three-cylinder fuel injector and fuel injection time (ms)
INJ4: Four-cylinder fuel injector and fuel injection time (ms)
www.obd2express.co.uk
INJ5: five-cylinder fuel injector and fuel injection time (ms)
INJ6: six-cylinder fuel injector and fuel injection time (ms)
Analog output
CTS: the temperature sensor signal simulation 0 ~ 10K
TPS: EGR valve position, throttle position sensor signal simulation 0 ~ 5V
MAP: Simulation of the intake pressure sensor signal 0 ~ 5V
MAF: Simulation of air flow meter signal 0 ~ 5V
O2: oxygen sensor signal simulation of 0 ~ 1V (manual adjustment)
O2A: Simulation of the oxygen sensor signal conditioning (signal 1-1V automatic
change)
Digital signal output
CKP: Crankshaft signal
AC: AC Signal
DC: DC signal
Actuator drive
ISC: Idle Speed ​​Control Valve Drive
PFC: ignition coil driver
INJ: injector drive
A1 \ A2 \ B1 \ B2: four-wire stepper motor driver
A \ B \ + \ + \ C \ D: six-wire stepper motor drive
Simulation of the ignition coil and ignition module
IG1: a tank simulation of the ignition coil and ignition module (positive \ negative
trigger)
IG2: two-cylinder ignition coils and ignition module simulation (positive \ negative
trigger)
IG3: three-cylinder ignition coils and ignition module simulation (positive \ negative
trigger)
IG4: Four-cylinder ignition coils and ignition module simulation (positive \ negative
trigger)
IG5: five-cylinder ignition coils and ignition module simulation (positive \ negative
trigger)
IG6: six-cylinder ignition coils and ignition module simulation (positive \ negative
trigger)

Solenoid valve analog:


SOL1: Coil 1
SOL2: coil 2
SOL3: Coil 3
SOL4: Coil 4
SOL5: Coil 5
SOL6: Coil 6

Automatic Terminal Tips


FPR: pump relay simulation
www.obd2express.co.uk
RL: relay simulation
+ B: 12V power output
NE +: crankshaft signal + output
NE-: crank signal - output
GND: Negative Power Supply

Multi-channel signal generator


CH1: Hall (optical) sensor output signal 1
CH2: Hall (optical) sensor output signal 2
CH3: magnetic sensor signal 1 output (isolated)
CH4: magnetic sensor signal 2 output (isolated)
CH5: magnetic sensor signal 3 output (isolated)

Key features:
F1: shortcut keys: General Signal Generator
F2: shortcuts: According to the model selection
F3: shortcut keys - 5V, 12V, 24V power supply all closed
↑: Menu Up
↓: Down Menu
+: Signal enhancement
-: Signal is reduced
RUN: running \ sure
RET: Return
READ: Read five-channel signal data crankshaft
OUT: crankshaft signal output
DIV: stepper motor operating voltage 12V \ 24V switch

POWER: Power switch

Rd arbitrary wave signal analog output Features

Rd arbitrary wave signal functional block diagram and working principle of


Introduction:

The function of the PC machines for the operating platform, and through the joint
control of CPU and memory has generated Rd arbitrary wave signal output, which
can produce various models of the crank signal is present; automatic transmission
input and output shaft signal; ABS III, IV channel wheel speed signal; and have the
waveform storage function.
Arbitrary wave signal generation are based PC, the operating software as the base
waveform editor, and an adjustable reference oscillator frequency signal for the
synchronization signal, by determining the number and the reference oscillation
signal level changes to the output waveform settings.
www.obd2express.co.uk
The "Channel 1, Channel 2" for the square-wave output, mainly used to simulate the
Hall, photoelectric crankshaft, camshaft signal. "Channel 3, Channel 4, Channel 5"
as the isolated AC signal output, used to simulate the magnetic-electric crankshaft
camshaft signal.

Instrument specific steps:

(connect computer—write signal wave data---click F1----click read---click


OUT—output signal wave

Waveform set software installation and use:


1, the first simulation experts onboard the CD into the computer drive, and open.
The "ELUSetup" file to your desktop, and double-click the file, the program installed.
www.obd2express.co.uk
2, the installation is complete, double click the desktop icon, the following interface:

5, the operation after the waveform editing interface.

6, according to different models, you can configure the interface in the wave zone
free of any settings you need to set the waveform, in which Channel 1, Channel 2 is
www.obd2express.co.uk
mainly used for two-channel square-wave set, the other three channels is mainly
used for sine wave configuration. After the waveform set in the "End phase" menu,
enter the wave at the interface we set "phase map" of where the end (that is, the
end of the waveform position) can also be said to be the end of the crankshaft
position signal a turn, and then the new cycle. For example: the drawing of the
output waveform in the "phase diagram" the end of the 7 position, and repeat the
cycle. We in the "end phase" menu, type 7. If a waveform set is not enough, click
"Next" to continue with the waveform set.

7, after the end of the waveform settings, click the "Save" to save the settings of the
waveform.

8, click the "Save", the pop up screen, select the file path, click the "Save" button.
www.obd2express.co.uk

Part of the engine computer wave file:

You might also like