User’s Manual Remote Control Functions

For
Exclusive Remote Control RC802V Standby / quit standby.
To display the Settings menu.
To access the Smart TV homepage.
To display the Option menu.
To confirm an entry or selection.This button is also used to
display the channel list in TV mode.
▲/▼/ Navigation direction buttons. The ▲/▼ buttons are also used
◄/► to change channels in TV mode.
To return to the previous menu or quit an App.
To select input source.
To turn on the Google Assistant/Google Voice Search function.
(Available only when the network connection works normally.)
To pop up the virtual remote control keyboard when available.
To control the volume.
To control the channels.
To access T recommended Apps.
To access Netflix.(Not available for some models.)

How to use the remote control

When using button for the first time, you will be prompted to pair
the remote with the TV. Please follow the on-screen guide for paring
instructions.
a. Keep the remote control and TV in 1 meter, press OK and
button on the remote at the same time. You can use after
activiating successfully.
b. This voice search function is only available for content search
from certain apps.
c. Set language in the TV settings to your local language or official
language to enhance voice search successfully.
d. When the voice search does not work, check if your remote
control has been successfully paired with your TV, if the language
setting is correct, if Google server is available and stable.
Installing Batteries Information for Users
on Disposal of Old
1. Push to open the back cover as illustrated. 1 Equipment and Batteries
2. Insert two AAA batteries according to the
polarities marked on the battery case. Notice: The sign Pb below the
symbol for batteries indicates
3. Replace the back cover as illustrated. 2 Products that this battery contains lead.
Warning These symbols indicate that
Batteries (battery pack or batteries installed) the electrical and electronic
shall not be exposed to excessive heat such equipment, and the battery
3 Pb with this symbol should not
as sunshine, fire or the like. be disposed of as general
Battery household waste at its
For the purpose of performance improve-
ment, design and specifications are subject end-of-life. Instead, the products should
to change without notice. be handed over to the applicable
collection points for the recycling of
electrical and electronic equipment as
What’s in the Box well as batteries for proper treatment,
recovery and recycling in accordance
1. Remote Control 2. Batteries 3. User’s Manual with your national legislation.
By disposing these products correctly,
Specifications you will help to conserve natural
resources and will help to prevent
potential negative effects on the
Remote control size 154.6mm x 37.9mm x 16.4mm environment and human health which
could otherwise be caused by
Operating environment -25~40 C inappropriate waste handling of these
temperpature products. For more information about
collection points and recycling of these
Weight 0.05kg products, please contact your local
municipal office, your household waste
RF2.4G Adaptive disposal service or the shop where you
Communication methods purchased the product. Please do so in
accordance with applicable national
legislation or other rules in your country
RF Operating distance >15m for the treatment of old electrical
equipment and batteries.
IR Operating distance >10m
Penalties may be applicable for incorrect
Battery type Zn/MnO2 1000mAh disposal of this waste, in accordance
> with national legislation.
Voice search current 15mA
>
Other button current 10mA
Sleep current <5μA (automatically enter sleep mode
after Bluetooth disconnected)
MIC Built-in microphone
Keyboard Handheld keyboard
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

FCC Supplier’s Declaration of Conformity

TCL / RC802V
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Suppliers Name :TTE Technology, Inc. (dba TCL North America)
Suppliers Address (USA) :1860 Compton Ave, Corona, CA 92881, USA
Suppliers phone number and internet contact information:1-877-300-9509, http://support.tclusa.com/

IC
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of
the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innova-
tion, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.