MINDANAO STATE UNIVERSITY -

ILIGAN INSTITUTE OF TECHNOLOGY

College of Education
Department of Technology and Teacher Education

In Partial Fulfillment of Requirements for

Detailed Lesson Plan

Teaching Common Competencies in ICT

TLE 117

Lesson Plan

Basic AutoCAD Commands and UI

Presented by:

Recla, Emmanuel R.
 Detailed Lesson Plan

Teacher: Recla, Emmanuel R. Date: 5-31-2022

Subject: Technical Drafting Time: 3:00-4:00 PM
No. of Students: Room: Zoom
Year Level: Grade 10

I. Objectives: At the end of the lesson, students will be able to:

A. Interpret CAD software features according to the software

B. Explore CAD working environment
C. Demonstrate CAD features as per activity requirement

II. Subject Matter: Technical Drafting – Preparing Computer Aided Drawing

A. References: DepEd, (2016, May). Information and Communication Technology –
Technical Drafting (NCII)
https://www.deped.gov.ph/wp-content/uploads/2019/01/Technical-Drafting-NC-II-
CG.pdf. Page range, 23

B. Methods in Teaching: Discussion, Demonstration, Use Application for

participation in group activities, Video presentation.

C. Instructional Materials: Laptop/Computer

III. Procedure:
Teacher’s Activity Student’s Activity

Good afternoon class… All: Good afternoon sir!!!

So, how’s your day class? Are you all feeling All: Yes sir…
great today?

Great I’m glad to hear that

Class, before we start our discussion, let’s Albert: Me sir…

have a prayer, who would like to lead our
prayer?

Oh, sure Albert you may lead the prayer. Albert: Oh Lord in Heaven please guide
us this day in our studies and activities
that all our works will be benefited with
the teachings that our teacher gives us.

So, again good morning class, I am glad to

see you again in our online class. I hope that
everyone is very eager to learn even we are
still adapting in this new way of learning.

Checking Attendance

First, let me check your attendance. I’ll call Everyone said “present” as their name
you one by one and say present when your is called
name is called.

Checking Assignments

As I have remembered, I gave you an

assignment, give at least (7) common All: Yes sir, we submitted our
AutoCAD commands. I instructed to submit it assignment already.
in our MOLE submission bin. Did all of you
submit the assignment I gave?
All: Yes sir, we received the PDF file
Okay, that’s good. I also sent an email of a
that you sent.
PDF file for you to check and review for the
next discussion. Did all of you receive the
email?

I just checked our MOLE submission bin and

all of you submitted your assignment. That
shows that all of you are good and obedient
student.

Okay, now that all of you has submitted your

assignment let’s check it. I’ll call a name and
give me at least (3) basic command in
AutoCAD.

Sprite recite at least (3) basic command in

AutoCAD
Sprite: L for Line, PL for Polyline and F
for Fillet.
Okay, very good…

How about you Kroto? Give me at least (1)

basic command in AutoCAD Kroto: TR for Trim, CH for Chamfer and
C for Circle.

Okay, all of your answer is correct; I hope that

all of you have familiarized the basic
commands in AutoCAD.

Review

Now, I will conduct a short review. I will divide

you into 5 groups and will be in a breakout The students is now discussing with
room and share your ideas about the usage their group mates about the usage of
of basic commands in AutoCAD. basic commands in AutoCAD.

Motivational

Have you all shared your ideas? Now, I will

present a video making an orthographic All: Yes sir…
projection using the basic commands in
AutoCAD and observe how it was used in the
drawing.

Introduction to topic

So, our subject matter for today is about

familiarizing the basic commands in AutoCAD
and exploring the AutoCAD environment.

For today’s lesson, we will tackle about the

basic commands and familiarizing the The students listened about the
working environment of AutoCAD. In this discussion and presentation that the
lesson you will be able to: teacher displayed on the screen.

 Interpret CAD software features

according to the software provider
 Explore CAD working environment
 Demonstrate CAD features as per job
requirement

The students shared their ideas and

insights regarding to the specific topics
that has been discussed.

Activity

Okay, today for your activity I will present an

orthographic view in the screen. You must be
able to analyze and replicate the exact
drawing I will show you. Feel free to ask
questions if you are quite confused to some
commands. But, limit your questions because
you must analyze and familiarize the basic
commands and working environment in
AutoCAD. I will give you 15 minutes to finish
your activity, you may start now.

The students started to draw the object

projected in the screen by the teacher.

(20 minutes has passed)

Analysis

Okay, time is up let me see how you

performed in this activity. So, I will call
someone to explain the steps on how to draw
the orthographic view that I displayed on the
screen.

Karl: First, I started drawing the top

The first person to explain will be Karl. view to project lines for me to create the
front view. Second, I have some of the
lines to create the front view and
continued to create it to project the right
side view. Lastly, I finished the drawing
of the right side view with the line
projection from the front view and
trimmed unnecessary lines to clean the
drawing.

Everyone clapped their hands for Karl.

Okay very well explained. Let’s give a hand
for Karl.

Abstraction

Okay, now, may I ask someone on how

useful it is to familiarize the basic commands
and work environment or UI (User Interface)
in AutoCAD? Brando: It is very useful to familiarize
the commands and UI in AutoCAD. You
May I ask Brando? can fluently perform without any hassle
and can efficiently finish your work in no
time.

Very good, thank you for that answer.

The teacher showed other commands

to the students to keep them familiarize
Okay class I will show some commands that
with basic but very useful commands.
you may haven’t encountered yet but will be
useful in the long run.

Application

Okay class, since you are all quite familiar The students started to create their own
with the basic commands in AutoCAD, I will orthographic and isometric
let you create your own object with
orthographic and isometric projection. I will
give you 20 minutes to create your own object
and you may start now.
Gomburza showed her output that is a
(After 25 minutes) very clean and interesting object. After
that others also showed their output
Okay class; show me the objects that you
one by one.
created. Let’s start with Gomburza…

Very good, well done. I guess, you are all

familiar and with the basic commands and UI
in AutoCAD.

IV. Evaluation

Now, for the evaluation, I will send a link for

you to identify what command and UI are
there in AutoCAD.

1. An area/bar where you can select tools

to use in your drawing. Students started answering the link that
has been given to them.
2. A command to prompt the line
drawing.

3. A key to automatically project the lines

in orthographic manner.

4. The cursor to select drawings and

objects.

5. Located in the lower left area that

shows the X, Y and Z axis.
 6. A command to make smooth or curved
edges in lines.

7. A command to erase specific lines in a

drawing.

8. An area or palette where it shows the

commands you recently used.

9. An area or bar where you can pan and

move your drawing.

10. A command to create an infinite line.

Answer: 1. Ribbon Area/Tab, 2. L, 3. F8, 4.

Selection Cursor, 5. UCS, 6. F or Fillet, 7. TR
or Trim, 8. Command Line/Palette, 9.
Navigation Bar/Area, 10. XL

V. Assignment

Now for the assignment, you must create a

floor plan of a 1 storey residential Students must do their assignment and
building/house. Submit it on Friday in our submit it on the MOLE submission bin
submission bin in MOLE. Did all of you before the preferred deadline.
enrolled in our MOLE already?

This assignment is worth 75 points and I will

give extra points who will submit earlier.
Submit the drawing in a lower version of dwg.
file so I can access it easily. All: No sir.

Before we end our class are there any

questions? All: Goodbye sir, keep safe and thank
you!!

Okay, thank you for your time, keep safe and

see you next meeting!