1.4.7 Packet Tracer - Configure Router Interfaces
1.4.7 Packet Tracer - Configure Router Interfaces
Addressing Table
R1
G0/1 172.16.20.129 /25 N/A
R1
S0/0/0 209.165.200.225 /30 N/A
PC1 NIC 172.16.20.10 /25 172.16.20.1
PC2 NIC 172.16.20.138 /25 172.16.20.129
R2 G0/0 2001:db8:c0de:12::1/64 N/A
R2
G0/1 2001:db8:c0de:13::1/64 N/A
R2
S0/0/1 2001:db8:c0de:11::1/64 N/A
R2 S0/0/1
fe80::2 N/A
PC3 NIC 2001:db8:c0de:12::a/64 fe80::2
PC4 NIC 2001:db8:c0de:13::a/64 fe80::2
Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity
Background
Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device
and verify connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.
Instructions
2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
1.4.7 Packet Tracer - Configure Router Interfaces
Final configuration
Router R1
interface GigabitEthernet0/0
ip address 172.16.20.1 255.255.255.128
no shutdown
interface GigabitEthernet0/1
ip address 172.16.20.129 255.255.255.128
no shutdown
interface Serial0/0/0
ip address 209.165.200.225 255.255.255.252
no shutdown
Router R2
interface GigabitEthernet0/0
ipv6 address 2001:DB8:C0DE:12::1/64
no shutdown
interface GigabitEthernet0/1
ipv6 address 2001:DB8:C0DE:13::1/64
no shutdown
interface Serial0/0/1
ipv6 address FE80::2 link-local
ipv6 address 2001:DB8:C0DE:11::1/64
no shutdown
2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com