Scribd
Upload
197 views

Esp32 Iot Development Trainer Kit

Uploaded by

Rijul Pragatheesh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
197 views

Esp32 Iot Development Trainer Kit

Uploaded by

Rijul Pragatheesh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ESP32 IoT Trainer Kit

Start Your IoT Journey Today..!


ESP32 essential development features a plug and play design that makes it easy for
connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on
Program / application development. ESP32 IoT Trainer Kit equipped with on board IO’s,
communication interfaces & peripherals. It is really easy to design, experiment with, and test
circuits without soldering. It’s used in many educational institutions and R&D LAB across
the world.

www.researchdesignlab.com RDL Technologies Pvt Ltd 1


ESP32 IoT Trainer Kit

Features:

Board Features

 On Board Programming.  7 Segment Multiplexed Display.


 Plug & Play Interface  16*2 LCD & OLED Display
Connectivity.  ADC & DAC Card.
 Professional EMI/RFI Complaint  8 bit 4 port IO.
PCB Layout Design  On Board WiFi/Bluetooth
 Modular Block design makes Easy Connectivity
access & quick Prototyping  3.3 to 5V Level Converter.
 FRC connectivity features  Power Supply 3.3V and 5V
minimize the connection Error.  SD CARD Interface.
 High Quality Grade PCB with  RTC & EEPROM Interface.
wooden Enclosure.  DC Motor/ Stepper Motor Driver.
 8 interfacing LED’s.  Relay, Buzzer.
 1 * 4 Menu keypad.  1xTemperature Sensor.
 4* 4 Matrix Keypad.  3x Analog Test POT.
 RS232, RS485, USB
communication port.

MCU
 ESP32-D0WD-V3 embedded, Wi-Fi
Xtensa® dual-core 32-bit LX6  802.11b/g/n
microprocessor, up to 240 MHz  Bit rate: 802.11n up to 150 Mbps
 448 KB ROM for booting and core  A-MPDU and A-MSDU
functions aggregation
 520 KB SRAM for data and  0.4 µs guard interval support
instructions  Center frequency range of
 16 KB SRAM in RTC operating channel: 2412 ~ 2484 MH
 4 MB SPI flash

Bluetooth® / BLE
 Bluetooth V4.2 BR/EDR and Bluetooth LE specification
 Class-1, class-2 and class-3 transmitter
 AFH
 CVSD and SBC

www.researchdesignlab.com RDL Technologies Pvt Ltd 2


ESP32 IoT Trainer Kit

Hardware
 Interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR,
pulse counter, GPIO, capacitive touch sensor, ADC, DAC, Two-Wire Automotive
Interface
 Communication Interface: RS232, RS485 (Modbus RTU) , USB , SPI , I2C .
 On Board Peripheral : OLED Display , 16x2 LCD Display, Seven Segment Display
,8x LED , 4x4 Hex Keypad , 1x4 Menu Keypad , Xbee Adapter, 3.3 to 5v Level
Converter, SD CARD Interface, RTC & EEPROM, DC Motor / Stepper Motor
Driver, Relay, Buzzer,1xTemperature Sensor,3x Analog Test POT ,8x Selection DIP
Switch

ESP-32 Board Narration

www.researchdesignlab.com RDL Technologies Pvt Ltd 3


ESP32 IoT Trainer Kit

1. Power Supply 14. RDL Bus FRC Connector


2. Power ON Switch 15. 4*4 Keypad Matrix
3. Heat Sink 16. ESP32 Controller
4. ADC (Variable Resistor POT) 17. 7 Segment Display
5. OLED Display 18. 2*4 LED's
6. Digital Input Switch 19. Jumper Settings for UART
7. RTC Battery Selection Pin
8. Buzzer 20. 16*2 LCD Display
9. Relay 21. WiFi Module
10. SD Card Holder 22. Jumper Settings for UART TTL
11. Jumper Settings for I2C RTC 23. USB Port
12. Jumper Settings for EEPROM 24. DB-9 Serial Female Connector
13. 1*4 Keypad Switches

Scope of Learning Experiments:

 LED blinking.  Elevator Interface.


 8 bit LED Left shift, Right shift  Buzzer, Relay interface.
and counting operation.  RS485, RS232 serial
 Keypad Interrupt Interface communication.
 16*2 LCD interface.  UART Operation
 Matrix Keypad Interface.  RTC DS1307I2C protocol
 ADC& DAC interface. interface.
 Traffic Light Signal Interface.  AT24C04 EEPROM I2C protocol
 8 bit DIP switch interface. interface.
 7 Segment interface.  RF/WiFi Communication.
 L298 Driver for DC Motor and  Temperature Sensor Interface.
Stepper motor interface.

www.researchdesignlab.com RDL Technologies Pvt Ltd 4


ESP32 IoT Trainer Kit

Applications

 Generic Low-power IoT Sensor  Home Automation


Hub  Smart Building
 Generic Low-power IoT Data  Industrial Automation
Loggers  Smart Agriculture
 Cameras for Video Streaming  Audio Applications
 Over-the-top (OTT) Devices  Health Care Applications
 Speech Recognition  Wi-Fi-enabled Toys
 Image Recognition  Wearable Electronics
 Mesh Network  Retail & Catering Applications

Package Includes

 Development Board with Wooden Enclosure


 USB Cable
 12V 2A Adapter
 FRC Cable

NOTE: XBee module is not included in the package

www.researchdesignlab.com RDL Technologies Pvt Ltd 5


ESP32 IoT Trainer Kit

www.researchdesignlab.com RDL Technologies Pvt Ltd 6

You might also like