Version 1.1 Warning! Calc Price displays a value when Size 1 and Size 2 (if applicable) are entered.

Make sure to read what S

Warning! Check Added/Modified Date to make sure you have the current costs. Some errors were found in the h
Fastener ID Fastener Size 1 Unit 1 Size 2 Unit 2 c1

Steel Loop Straps, Rubber-Cushioned 25.40 mm 0.0100

Galvanized Steel Loop Straps 25.40 mm 0.0020

Galvanized Steel Loop Straps, Rubber

25.40 mm 0.0040
coated

Metal fixed loop swivel snap 25.40 mm 0.0053

Hose Clamp, Spring Steel 25.40 mm 0.0140

Hose Clamp, Constant Tension 25.40 mm 0.1230

Hose Clamp, Miniature Bolt 25.40 mm 0.0040

Hose Clamp, Single Wire 6.35 mm 0.0040

Hose Clamp, V-Band Quick Release 50.00 mm 0.118

Hose Clamp, Worm Drive 25.40 mm 0.0040

Retaining Ring, R-ring 6.00 mm 0.0002

Retaining Ring, Internal 6.00 mm 0.0002

Retaining Ring, External 6.00 mm 0.0002

Retaining Ring, Spiral 6.00 mm 0.0002

Alcoa Camloc Fastener 1/4 turn ₹ 260.00 unit

Bolt, Aluminum mm mm 1.00

Bolt, Banjo unit

Bolt, Custom Design, Student Made ₹ - unit

Bolt, Grade 10.9 (SAE 8) 12.7 mm 0 mm 1.00

Bolt, Grade 12.9 12.7 mm 0 mm 1.25

Bolt, Grade 6.8 (SAE 3) and All Grades less

12.7 mm 0 mm 0.60
than Metric 8.8

Bolt, Grade 8.8 (SAE 5) 12.7 mm 0 mm 0.80

Bolt, Grade AN 12.7 mm 0 mm 2.00

Bolt, Grade NAS 12-Point 12.7 mm 0 mm 6.25

Bolt, Grade NAS 6-Point 12.7 mm 0 mm 2.50

Buckle, side release, metal 25mm 0.05

Clevis 12.7 mm 0.01
Dzus Fastener, 1/4 Turn, Slotted Head ₹ 78.00 unit
Dzus Fastener, 1/4 Turn, Wing Head ₹ 84.50 unit
Eyebolt, Threaded, Steel mm 0.87
Hook and Loop, Hook Side (Velcro) ₹ 0.20 cm^2
Hook and Loop, Loop Side (Velcro) ₹ 0.13 cm^2
Nut, Custom Design, Student Made ₹ - unit
Nut, Grade 10.9 (SAE 8) mm mm 0.0120
Nut, Grade 12.9 mm mm 0.0150
Nut, Grade 6.8 (SAE 3) and All Grades less
mm mm 0.0070
than Metric 8.8
Nut, Grade 8.8 (SAE 5) 40.00 mm 10 mm 0.0090
Nut, Grade AN mm mm 0.0600
Nut, Grade NAS 12-Point mm mm 0.3000
Nut, Grade NAS 6-Point mm mm 0.1200
Nut, Lug ₹ 26.00 unit
Nut, Panel Retained unit mm 0.050
Nutsert (J-Nut) unit mm 0.050
Pin, Cotter, Straight ₹ 3.25
Pin, Cotter, Hairpin ₹ 5.20
Pin, Plastic Push ₹ 6.50 unit
Pin, Safety, Coiled Wire unit mm 0.009
Pin, Safety, Square Retainer Snap unit mm 0.001
Pin, Quick Release mm mm 0.001
Rivet, Pop ₹ 1.95 unit
Safety Wire ₹ - unit
Stud, Grade 10.9 (SAE 8) mm mm 1.00

Stud, Grade 12.9 mm mm 1.25

Stud, Grade 8.8 (SAE 5) mm mm 0.80

Tapered Pin, Threaded (AN386) ₹ 162.50 unit

Tie Wrap ₹ 2.60 unit
Thread Insert mm 0.10
Washer, Crush mm
Washer, Grade 10.9 (SAE 8) ₹ 1.30 unit
Washer, Grade 12.9 ₹ 1.30 unit
Washer, Grade 6.8 (SAE 3) and All Grades
less than Metric 8.8 ₹ 0.65 unit

Washer, Grade 8.8 (SAE 5) ₹ 0.65 unit

Washer, Grade AN mm mm 0.005
Washer, Grade NAS 12-Point mm mm 0.005
Washer, Grade NAS 6-Point mm mm 0.005

Adapter, AN
Coupling, AN
Elbow, AN
Tee, AN
Cap, AN
Plug, AN
Nut, AN
Sleeve, AN
 d. Make sure to read what Size1 and Size2 refer to in the comments field, fill out the appropriate size values before using calc price.
me errors were found in the hose clamp equations in the calc price cell.
c2 Table Price System Category Calc Price Attachment

0.0100 [C1]*[Size1]+[C2] Clamp

₹ 17.16

0.0800 [C1]*[Size1]+[C2] Clamp

₹ 8.50

0.0800 [C1]*[Size1]+[C2] Clamp

₹ 11.80

0.2600 [C1]*[Size1]+[C2]

₹ 25.65

0.0000 [C1]*[Size1] Clamp

₹ 23.11

2.6000 [C1]*[Size1]+[C2] Clamp

₹ 372.07

0.5000 [C1]*[Size1]+[C2]

₹ 39.10
0.0200 [C1]*[Size1]+[C2]

₹ 2.95

10.46 [C1]*[Size1]+[C2]

₹ 1,063.40

0.5000 [C1]*[Size1]+[C2] Clamp

₹ 39.10

0.0130 [C1]*([Size1]^2)+[C2]

₹ 1.27

0.0130 [C1]*([Size1]^2)+[C2]

₹ 1.27

0.0130 [C1]*([Size1]^2)+[C2]

₹ 1.27

0.0250 [C1]*([Size1]^2)+[C2]

₹ 2.05

[C1]/
0.0050 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 0.33
 [C1]/
0.0040 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 14.94
[C1]/
0.0050 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 18.68
[C1]/
0.0024 105154*[Size1]1^2*[Size1]2*SQRT([Size1]2
)+([C2]*E[Size1]P(0.319*[Size1]1)) ₹ 8.97
[C1]/
0.0030 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 11.21
[C1]/
0.02 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 74.71
[C1]/
0.10 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 373.57
[C1]/
0.04 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 149.43
0.59 [C1]*[Size1]+[C2] ₹ 121.23
0.61 [C1]*[Size1]^2+[C2] ₹ 144.49

0.05 [Quantity]*(([C1]*EXP([C2]*[Size1]))) ₹ 56.55

0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 0.78

0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 0.98

0.2000 ([C1]*EXP([C2]*[Size1]))
₹ 0.46
0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 1,743.86
0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 3.90
0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 19.50
0.2000 ([C1]*EXP([C2]*[Size1])) ₹ 7.80

0.250 [Quantity]*([C1]*EXP([C2]*[Size1])) ₹ 3.25

0.250 [C1]*EXP([C2]*[Size1]) ₹ 3.25

0.4 [Quantity]*([C1]*[Size1]+[C2]) ₹ 26.00

1 [Quantity]*([C1]*[Size1]*[Size2]+[C2]) ₹ 65.00
14.000 [Quantity]*([C1]*[Size1]^2*[Size2]+[C2]) ₹ 910.00
 [C1]/
0.0040 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 0.26
[C1]/
0.0050 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 0.33
[C1]/
0.0030 105154*[Size1]^2*[Size2]*SQRT([Size2])+
([C2]*EXP(0.319*[Size1])) ₹ 0.20

[Quantity]*([C1]*[Size1])

0.180 ([C1]*EXP([C2]*[Size1])) ₹ 0.33

0.360 ([C1]*EXP([C2]*[Size1])) ₹ 0.33
0.360 ([C1]*EXP([C2]*[Size1])) ₹ 0.33

Fitting, AN
Fitting, AN
Fitting, AN
Fitting, AN
Fitting, AN
Fitting, AN
Fitting, AN
Fitting, AN
before using calc price.

Comments

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=width of strap (mm).

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=final clamped diameter [mm]

[Size1]=shaft diameter [mm]

[Size1]=shaft diameter [mm]

[Size1]=shaft diameter [mm]

[Size1]=shaft diameter [mm]

[Size1]=diameter (mm). [Size2]=length (mm). Strength 255 Mpa. Special varities included (drilled head, locking, etc.).

This item is in the materials table under plumbing

To be used for designs that do not match standard bolt configurations, such as threaded rocker arm posts
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1030 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1170 Mpa. Special varities included (drilled head, locking,
etc.).

[Size1]=diameter (mm). [Size2]=length (mm). Strength 670 Mpa. Special varities included (drilled head, locking, etc.)

[Size1]=diameter (mm). [Size2]=length (mm). Strength 830 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 830 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1240 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1100 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=width of strap (mm).
[Size1]=bore size (diameter of hole). Includes male/female and left/right threads.
Includes 1/4 Turn stud, plate, spring and spring receptacle
Includes 1/4 Turn stud, plate, spring and spring receptacle
[Size1]=Inner Diameter of Eye
Same cost for adhesive backed or non-adhesive backed. Only includes one side of joint (hook side)
Same cost for adhesive backed or non-adhesive backed. Only includes one side of joint (loop side)
To be used for designs that do not match standard nut configurations, such as wheel nuts
[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).
[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).

[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).

[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).
[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).
[Size1]=diameter (mm). Special varities included (drilled head, locking, etc.).
Any size
Any type of nut with a retaining or anti-rotation feature for a panel (weldnut, etc.)

All sizes up to 5mm diameter.

All sizes up to 5mm wire diameter.
Any size
[Size1]=Usable length (mm).
[Size1]=Pin Diameter (mm), [Size2]=Usable length (mm).
[Size1]=Diameter (mm). [Size2]=Usable Length. Any style pin (T-handle, Ring Grip, etc.).
Any diameter and length
Included in labor cost.
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1030 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 1170 Mpa. Special varities included (drilled head, locking,
etc.).
[Size1]=diameter (mm). [Size2]=length (mm). Strength 830 Mpa. Special varities included (drilled head, locking,
etc.).
AN386 up to 6.35mm
Includes all styles and sizes of plastic cable ties including Cable Clamp, Zip Tie, etc.
[Size1]=nominal hole diameter (mm).
This item is in the materials table under plumbing
[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).
[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).

[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).

[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).
[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).

[Size1]=diameter (mm). Any thickness. Special varities included (drilled head, locking, etc.).