Module 5

5) Introduction to ARDUINO
• Arduino is an open-source advancement prototyping (development model) platform
which depends on simple to utilize equipment and programming.
• Instructions to the microcontroller are given by the use of Arduino programming.
• Arduino software(IDE-Integrated improvement environment)
• The Arduino is a small computer that you can program to read information from the
world around you and to send commands to the outside world.
• Arduino is a tiny computer that you can connect to electrical circuits.
• The brain of this board (Arduino Uno) is an ATmega328p chip (Micro controller) where
you can store your programs that will tell your Arduino what to do.
Why Arduino?

1) Arduino is a open source product , software/hardware which is accessible and flexible to

customers.
2) Arduino is flexible because of offering variety of digital and analog pins , SPI (Serial
Peripheral Interface) and PWM
3) The PWM pins are used for giving the desired analog output .They are used to set the
LED brightness or to run Stepper or Servo Motor or anything which require analog inputs
3, 5, 6, 9, 11 (PWM)

4) Serial Peripheral Interface (SPI) :- is an interface bus commonly used to send data
between microcontrollers and small peripherals such as sensors, and SD cards.

5) Arduino is easy to use, connected to a computer via a USB and communicates using serial
protocol .

6) Inexpensive around 500 rupees per board with free authoring software.

7) Ardunio has growing online community where lots of source code is available for use .

8) Ardunio is Cross-platform, which can work on windows,Mac or Linux platforms.

9) Ardunio follows simple, clear programming environment as C-language.

5.1.2) Which Arduino?

 In the ten years since Arduino was released , hundreds of “Arduino boards” are available
in the market serving every kind of purpose.
 We focus on Arduino UNO .
 Some of the Boards from Arduino family are given below.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 1

 Module 5

 Arduino mega is a big sister to the UNO with more memory and pins with a different chip
the Atmega2560,useful when your project doesn”t fits in an UNO.
 Arduino Micro is bit smaller with a chip Atmega32u4 that can act like a keyboard or
mouse which does its task with native USB.
 Its slim with downward pins which can be plugged into a breadboard.
 The Arduino MKR1000 is a little like an Arduino Micro but has a more powerful 32-bit
ATSAM ARM chip and built-in WiFi.
 A great upgrade for when you want to do internet of Things projects.
 Flora is an Arduino compatible from Adafruit which is a round wearable which can be
sewed (attach) into clothes.

Exploring ARDUINO UNO Learning Board.

 Microcontroller:- The ATmega328p is the Arduino brain.Everything on the Arduino

board is meant to support this microcontroller
 Digital pins- 0-13
 For input or output
 Apply 5v (HIGH)
 0V (LOW)

Figure 5-1: Arduino Uno Learning Board

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 2

 Module 5

Things that Arduino can do

Installing the Software(Arduino IDE)

• The Arduino IDE (Integrated Development Environment) is where you develop your
programs that will tell your Arduino what to do.
• You can load new programs onto the main chip, the ATmega328p,via USB using the
Arduino IDE.
• Browse on the following link:.Select which Operating System you are using and
download.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 3

 Module 5

• https://www.arduino.cc/en/Main/Software

Figure 5.2 : Arduino IDE

5.3.1) Connecting Arduino Uno Learning Board.
 After connecting your Arduino with a USB cable, you need to make sure that Arduino
IDE has selected the right board you are using.
 In our case , we are using Arduino Uno,so you should go to
Tools>Board”Arduino/Genuino Uno”> Arduino/Genuino Uno as shown in figure 5- 3.
 Then you select the right serial port where your Arduino is connected to.
 Go to Tools>port and select the right port as shown in Figure 5-4 and Figure 5-5shows
the layout of ArduinoIDE.

Figure 5.3 : Selecting the right Board

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 4

 Module 5

Figure 5.4 : Selecting the right port

Figure 5.5 : Layout of Arduino Uno IDE.

Breadboard for prototyping Arduino Uno Circuits

• In order to keep your circuit organized you need to use a breadboard, pictured below in
Figure 5-6.

• The breadboard allows you to connect components together by plugging them into the
little holes.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 5

 Module 5

• The key is to understand how the holes are connected.

Figure 5.6 : Breadboard for prototyping Arduino Uno circuits.

Table-1 Technical Specification of Arduino UNO

Fundamentals of Arduino Programming
In this section explains the basic structure of Arduino programming with respect to
usage of variables, constants , control flow statement and finally the predefined
functions used to read analog and digital inputs.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 6

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 7

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 8

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 9

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 10

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 11

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 12

 Module 5

5.4.1) Difference between Analog, Digital and PWM Pins

• In analog pins, you have unlimited possible states between 0 and 1023.
• This allows you to read sensor values.
• Example: With a light sensor, if it is very dark , you will read 1023,if it is very bright yow
will read as 0.
• If the brightness between dark and very bright you will read a value between 0 and 1023.
• In digital pins you have just two possible states, which is on and off.
• These can also be referred as High or Low,1 or 0 and 5v or 0V
• If the LED is on then its state is High or 1 or 5 V. If it is off have Low 0 0r 0 v.
• PWM pins are digital pins , so they output either 0 or 5v
• However these pins can output fake intermediate voltage values between 0 and 5 v
because they can perform “ Pulse Code Modulation”.

Figure 5.7 : Difference between Analog, Digital and PWM Pins.

Introduction to RaspberryPi
• The RaspberryPi is a series of credit card sized single-board computers developed in the
United Kingdom by the Raspberrypi Foundation to promote the teaching of basic
computer science in schools and developing countries.
• Several generations of RaspberryPi have been released.
• The first generation (RaspberryPi 1 model B) was released in February 2012, followed by
a simple and inexpensive model A.
• In 2014 , the foundation released a board with an improved design in Raspberry 1 model
B+.
• Improved A+ and B+ model were released a year later.
• RaspberryPi Zero with smaller size and limited input/output (I/O)and general purpose
input/ output (GPIO) abilities was released in November 2015 for US $5.
• RaspberryPi 2 which added more RAM was released in February 2015.
• RaspberryPi 3 model B released in February 2016 in bundled with on-board Wi-Fi and
Bluetooth.
• As of 2016 , Raspberrypi 3 model b is the newest mainline RaspberryPi. These boards are
priced between US $ 5-35.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 13

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 14

 Module 5

) Exploring the RaspberryPi Learning Board

Figure 5.8: GPIO Pinout Diagram.

Figure 5.9: Raspberry Pi2 Model B and its GPIO.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 15

 Module 5

 Processor – The Broadcom BCM2835 SoC( System on Chip) used in the first generation
Raspberrypi is somewhat equivalent to the chip used in first generation smart phones,
Which includes a 700MHz ARM1176JZF-S Processor, Video Core IV graphics
processing unit(GPU) and RAM.
• This has a level 1 (L1) cache of 16 KB and a level 2 (L2) cache of 128 KB.
• The level 2 cache is used primarily by the GPU.
• The Raspberrypi2 uses a Broadcom BCM2836 SoC with a 900 MHz 32-bit quad-core
ARM cortex A7 processor with 256KB shared L2 cache.
• The Raspberrypi2 uses a Broadcom BCM2837 SoC with a 1.2 GHz 64-bit quad-core
ARM cortex A53 processor, with a 512 KB shared L2 cache.
 Power Source:- The recommended and easiest way to power the Raspberrypi is via the
Micro USB port on the side of the unit.
• The recommended input voltage is 5V , and the recommended input current is 2A.
 SD Card (Secure Digital Card): The Raspberry Pi does not have any locally available
storage accessible.
• The working framework is stacked on a SD card which is embedded on the SD card space
on the Raspberry Pi.
 GPIO(General Purpose Input Output): General –purpose input/output (GPIO) is a non
specific pins on a coordinated circuit to know is an input or output pin which can be
controlled by the client at run time.
• GPIO capabilities may include

1. GPIO pins can be designed to be input or output.

2. Input values are meaning (normally high=1, low=0).

3. Yield values are writable/meaningful.

4. Input values can frequently be utilized as IRQs(interrupt request).

 DSI Display x: The Raspberrypi Connector S2 is a display serial interface(DSI) for

connecting a liquid crystal display(LCD) panel using a 15 pin ribbon cable.
 Audio Jack: A standard 3.5 mm TRS connector is accessible on the Rpi for stereo sound
yield.
 Any earphone or 3.5mm sound link can be associated straightforwardly.
 Status LEDS: There are 5 status LEDs on the Rpi that demonstate the status of different
exercise

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 16

 Module 5

1. OK- SDCard Access.

2. POWER- 3.3 v Power

3. FDX- Full Duplex LAN

4. LNK- Link/ Activity(LAN) (Model B)

5. 10M/100-10/100M bit (LAN) (Model B)

 Ethernet Port :is accessible on Model B and B+.

• It can be associated with a system or web utilizing a standard LAN link on the Ethernet
port.

 CSI connector (CSI) – Camera Serial interface is a serial interface outlined (define) by
MIPI (Mobile Industry Processor Interface) organization together went for interfacing
cameras with a portable processor.
 HDMI- High Definition Multimedia Interface to give both video and sound yield.

) Description of system on chip(SoC)

 SoC is an integrated circuit(IC) that coordinated all parts of a PC or other electronic

framework into a solitary chip.
 SoC comprises of:

1) A microprocessor chip or DSP core.

2) Memory pieces including (ROM,RAM,EEPROM)

3) Timing signal –oscillators

4) Peripherals include counter-clocks, ongoing clocks

5) Outer interfaces example: USB, Ethernet

6) Simple interfaces includes ADCs (Analog and Digital Converter) and DACS( Digital and
Analog Converter)

7) Voltage Controllers and power administration circuits.

Accessories

 Camera: On 14 May 2013 , the establishment and the merchants RS Components and
Premier Farnell/ Element 14 propelled the Raspberry pi camera board with a firmware
redesign to bolster it.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 17

 Module 5

 Gertboard- A Raspberry Pi Foundation authorized gadget intended for instructive

purpose, and grows the Raspberry Pi’s GPIO pins to permit interface with of LEDs ,
switches, sensors and different gadges.

5.7) Raspberry Pi interfaces.

 Serial :- The serial interface on Raspberry Pi has receive(rx) and transmit(Tx) pins for
communication with serial peripherals.
 SPI:- Serial Peripheral interfaces( SPI) is a synchronous serial data protocol used for
communication with one or more peripheral devices.

• MISO (Master In Slave Out): Master line for sending data to the peripherals.

• MOSI(Master out Slave In): Slave line for sending data to the master.

• SCK( Serial Clock): Clock generated by Master to synchronize data

transmission.

• CEO( Chip Enable 0): To enable or disable device

• CEO( Chip Enable 1): To enable or disable device

 I2C:- The I2C interface pins on Raspberry Pi allow you to connect hardware
modules.

)RaspberryPI Operating System.

 Various operating system can be installed on Raspberrypi through SD cards.

Operating Systems( not Linux based)

Operating Systems( Linux based)

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 18

 Module 5

Media center Operating systems

Audio Operating systems

Recalbox

Operating System Setup in RaspberryPI

 Preinstalled NOOBS operating system is already available in many authorized as well as

independent seller, there are many other operating system for Raspberrypi in the market
like NOOBS, Raspbian and third party operating systems are also available like
UBUNTU MATE, OSMC,RISC OS etc.
 To setup an operating system we need a SD card with minimum capacity of 8GB.

Formatting SD card:

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 19

 Module 5

OS installation

First Boot

Login information

 The default login for Raspbian is username “pi” with the password “raspberry”.
 To load the graphical user interface, type “Startx” and press Enter.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 20

 Module 5

RaspberryPI Commands

Programming RaspberryPI with python

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 21

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 22

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 23

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 24

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 25

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 26

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 27

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 28

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 29

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 30

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 31

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 32

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 33

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 34

 Module 5

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 35

 Module 5

Digital Temperature Sensors Vs. Analog Temperature Sensors

• Analog temp. sensors contain thermistors and temperature value is obtained from
resistance value (due to change in volt)
• Digital temperature sensors are typically silicon based integrated circuits
• Unlike analog temperature sensors, calculations are performed by the sensor, and the
output is an actual temperature value
Raspberry Pi and DS18B20 Temperature Sensor

About the DS18B20

• The DS18B20 also has an alarm function that can be configured to output a signal when
the temperature crosses a high or low threshold that’s set by the user

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 36

 Module 5

• A 64 bit ROM stores the device’s unique serial code. This 64 bit address allows a
microcontroller to receive temperature data from many sensors with identity.

• The DS18B20 temperature sensor is perfect for projects like weather stations and home
automation systems

• The size is same as a transistor and use only one wire for the data signal

• Extremely accurate and take measurements quickly

DS18B20 : Technical Specifications

• -55°C to 125°C -: temperature range

• 3.0V to 5.0V :- operating voltage

• 0.5°C (9 bit); 0.25°C (10 bit); 0.125°C (11 bit); 0.0625°C (12 bit) resolution

• 64 bit unique address

• One-Wire communication protocol

DS12B20 Pin Diagram

Figure 5.10 DS12B20 Pin Diagram

5.13.1) Configuring Raspberry Pi

• sudo nano /boot/config.txt

• Add this  “dtoverlay=w1-gpio” at the end of file if doesn’t exist

• sudo reboot

• sudo modprobe w1-gpio

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 37

 Module 5

• sudo modprobe w1-therm

• cd /sys/bus/w1/devices

• ls

• cd 28-xxxx

• cat w1_slave

• a3 01 4b 46 7f ff 0e 10 d8 : crc=d8 YES

• a3 01 4b 46 7f ff 0e 10 d8 t=32768

Pi Via SSH (Secure Shell)

 You can access the command line of a Raspberry Pi remotely from another computer or
device
 The Raspberry Pi will act as a remote device: you can connect to it using a client on
another machine.

1. Set up your local network and wireless connectivity

• Make sure your Raspberry Pi is properly set up and connected.

• If you are using wireless networking, this can be enabled via the desktop's user interface,
or using the command line

• You will need to note down the IP address of your Pi in order to connect to it later.

 Using the ifconfig command will display information about the current network status,
including the IP address, or you can use hostname -I to display the IP addresses
associated with the device

2. Enable SSH

 Enter sudo raspi-config in a terminal window

 Select Interfacing Options
 Navigate to and select SSH
 Choose Yes
 Select Ok
 Choose Finish

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 38

 Module 5

Alternatively, use systemctl to start the service

 sudo systemctl enable ssh

 sudo systemctl start ssh

3. Enable SSH on a headless Raspberry Pi (add file to SD card on another machine)

 For headless setup, SSH can be enabled by placing a file named ssh, without any
extension, onto the boot partition of the SD card from another computer.
 When the Pi boots, it looks for the ssh file. If it is found, SSH is enabled and the file is
deleted

4. Set up your client

 SSH is built into Linux distributions and Mac OS. For Windows and mobile devices,
third-party SSH clients are available.

Smart and Connected Cities

An IoT Strategy for Smarter Cities

 Managing a city bears some resemblance to managing a corporate enterprise.

 As the need for efficiency increases, new tools help increase operational efficiency.
 For cities, just as for businesses, digitization transforms the perspective on operations.
 New ideas emerge, bringing different approaches to solving management issues.
Vertical IoT Needs for Smarter Cities
 There are many differing approaches and solutions for city management.
 Allthese solutions typically start at the street level, with sensors that capture data on
everything from parking space availability to water purity.
 Data analytics is also used extensively—for example, to reduce crime or improve traffic
flows.
 Citizens can use tools to leverage their smart mobile devices, such as to report problems
and make recommendations for improving urban life or locate available parking spaces.
 When enabled through connectivity, these smart solutions can have a transformative
impact on quality of life.
 A recent Cisco study, as illustrated in Figure 5.11, expects IoT to have the following
economic impact over a 10-year period:

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 39

 Module 5

Figure 5.11 Key Use Cases for Smart Cities

1) Smart buildings: Smart buildings have the potential to save $100 billion by lowering
operating costs by reducing energy consumption through the efficient integration of heating,
ventilation, and air-conditioning (HVAC) and other building infrastructure systems.
 Note that the financial gain applies to city budgets only when a building is city owned.
 However, the reduced emissions benefit the city regardless of who owns the buildings.
2) Gas monitoring: Monitoring gas could save $69 billion by reducing meter-reading costs
and increasing the accuracy of readings for citizens and municipal utility agencies.
 The financial benefit is obvious for users and utility companies when the utility is
managed by the city.
 There are also very important advantages in terms of safety, regardless of who operates
the utility.
 In cases of sudden consumption increase, a timely alert could lead to emergency response
teams being dispatched sooner, thus increasing the safety of the urban environment.
3) Smart parking: Smart parking could create $41 billion by providing realtime visibility
into parking space availability across a city.
 Residents can identify and reserve the closest available space, traffic wardens can identify
noncompliant usage, and municipalities can introduce demand based pricing.
4) Water management: Smart water management could save $39 billion connecting
household water meters over an IP network to provide remote usage and status information.
 The benefit is obvious, with features such as real-time consumption visibility and leak
detection.
 A gate or a pump can be opened and closed remotely and automatically in real time,
based on a variety of flow input and output analytics data.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 40

 Module 5

 Vibrations can be measured to detect and predict potential equipment failures.

 Repair teams can be dispatched proactively before equipment failure occurs.
Road pricing: Cities could create $18 billion in new revenues by implementing automatic
payments as vehicles enter busy city zones while improving overall traffic conditions.
 Real-time traffic condition data is very valuable and actionable information that can also
be used to proactively reroute public transportation services or private users.
Global vs. Siloed Strategies
 The main obstacle in implementing smart solutions in today’s traditional infrastructure is
the complexity of how cities are operated, financed, regulated and planned.
 Cities attempting to upgrade their infrastructure to match the growing needs of the citizen
population often invest in one problem at a time, and they do it independently.
 Even cities using IoT technology break up city assets and service management into silos
that are typically unable to communicate or rely on each other.
The independent investment model results in the following problems:
 Isolation of infrastructure and IT resources
 No sharing of intelligence and information, such as video feeds and data
from sensors.
 Waste and duplication in investment and effort
 Difficulty scaling infrastructure management
 All these requirements pose technological challenges, including the following:
 How do you collect the data? What are the various sources of data, including
hardware endpoints and software?
 How do you make sure that any data collection devices, such as sensors, can be
maintained without high costs?
 Where do you analyze the data? What data do you carry back to the cloud, and what
data do you analyze locally?
 What kind of network connectivity is best suited for each type of data to collect?
 What kind of power availability and other infrastructure, such as storage, is required?
 How do you aggregate data from different sources to create a unified view?
 How do you publish the data and make it available for applications to consume?
 How do you make the end analysis available to specialized smart city personnel, such
as traffic operators, parking enforcement officers, street lighting operators, and so on
at their logical decision points?
 How do you present the long-term analysis to city planners?

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 41

 Module 5

Smart City IoT Architecture

 A smart city IoT infrastructure is a four-layered architecture, as shown in Figure 5-12.
 Data flows from devices at the street layer to the city network layer and connect to the
data center layer, where the data is aggregated, normalized, and virtualized.
 The data center layer provides information to the services layer, which consists of the
applications that provide services to the city.

Figure 5.12 Smart Cities Layered Architecture

1) Street Layer
 The street layer is composed of devices and sensors that collect data and take action based
on instructions from the overall solution, as well as the networking components needed to
aggregate and collect data.
 A sensor is a data source that generates data required to understand the physical world.
Sensor devices are able to detect and measure events in the physical world.
 ICT (information and communication technology ) connectivity solutions rely on sensors
to collect the data from the world around them so that it can be analyzed and used to
operationalize use cases for cities.
 A variety of sensors are used at the street layer for a variety of smart city use cases
 A magnetic sensor can detect a parking event by analyzing changes in the
surrounding magnetic field when a heavy metal object, such as a car or a truck,
comes close to it (or on top of it).
 A lighting controller can dim and brighten a light based on a combination of time-
based and ambient conditions.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 42

 Module 5

 Video cameras combined with video analytics can detect vehicles, faces,
and traffic conditions for various traffic and security use cases.
 An air quality sensor can detect and measure gas and particulate matter
concentrations to give a hyper-localized perspective on pollution in a given area.
 Device counters give an estimate of the number of devices in the area, which
provides a rough idea of the number of vehicles moving or parked in a street or a
public parking area, of pedestrians on a sidewalk, or even of birds in public parks
or on public monuments—for cities where bird control has become an issue.
2) City Layer
 At the city layer, which is above the street layer, network routers and switches must be
deployed to match the size of city data that needs to be transported.
 This layer aggregates all data collected by sensors and the end-node network into a single
transport network.
 The city layer may appear to be a simple transport layer between the edge devices and the
data center or the Internet.
 However, one key consideration of the city layer is that it needs to transport multiple
types of protocols, for multiple types of IoT applications.
 Some applications are delay- and jitter-sensitive, and some other applications require a
deterministic approach to frame delivery.
 As a result, the city layer must be built around resiliency, to ensure that a packet coming
from a sensor or a gateway will always be forwarded successfully to the headend station.
Figure 5.13 shows a common way of achieving this goal.

Figure 5.13 Street Layer Resiliency

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 43

 Module 5

3) Data Center Layer

 Ultimately, data collected from the sensors is sent to a data center, where it can be
processed and correlated.
 Based on this processing of data, meaningful information and trends can be derived, and
information can be provided back.
 For example, an application in a data center can provide a global view of the city traffic
and help authorities decide on the need for more or less common transport vehicles.
 At the same time, an automated response can be generated.
 For example, the same traffic information can be processed to automatically regulate and
coordinate the street light durations at the scale of the entire city to limit traffic
congestion.
 The key technology in creating any comprehensive smart solution with services is the
cloud.
 With a cloud infrastructure, data is not stored in a data center owned directly or indirectly
by city authorities.
 Instead, data is stored in rented logical containers accessed through the Internet.
 Because the containers can be extended or reduced based on needs, the storage size and
computing power are flexible and can adapt to changing requirements or budget
conditions.
 In addition, multiple contractors can store and process data at the same time, without the
complexity of exclusively owned space.
 This proximity and flexibility also facilitate the exchange of information between smart
systems and allow for the deployment of new applications that can leverage information
from several IoT systems.
 Figure 5.14 shows the vision of utilizing the cloud in smart solutions for cities.
 The cloud provides a scalable, secure, and reliable data processing engine that can handle
the immense amount of data passing through it.
 Smart city issues require not just efficient use of infrastructure, which the cloud helps
enable, they also require new data processing and management models.
 For example, cloud services allow for Software as a Service (SaaS) models that create
cyclical returns on investment.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 44

 Module 5

Figure 5.14 The Role of the Cloud for Smart City Applications

 With the cloud approach shown in Figure 5.14 , smart cities can also take advantage of
operating expense–based consumption models to overcome any financial hurdles in
adopting solutions to their most critical issues.
 Critical data, such as air condition (humidity, temperature, pollution) levels monitoring,
can be processed initially.
 Then, as the efficiency of IoT is scaled up, richer data processing can be enabled in the
cloud applications.
 For example, the humidity level can be used to regulate the color and luminosity of street
lights. In times when city budgets are strained, data processing can be scaled down to
essential services.
4) Services Layer
 Ultimately, the true value of ICT connectivity comes from the services that the measured
data can provide to different users operating within a city.
 Smart city applications can provide value to and visibility for a variety of user types,
including city operators, citizens, and law enforcement.
 The collected data should be visualized according to the specific needs of each consumer
of that data and the particular user experience requirements and individual use cases.
 For example, parking data indicating which spots are and aren’t currently occupied can
drive a citizen parking app with a map of available spots, as well as an enforcement
officer’s understanding of the state (utilization and payment) of the public parking space,

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 45

 Module 5

while at the same time helping the city operator’s perspective on parking problem areas in
the city at any given time.
 With different levels of granularity and scale, the same data performs three different
functions for three different users.

 Along the same lines, traffic information can be used by individual car drivers to find
the least congested route.
 A variation of the same information can be made available to public transportation users
to estimate travel times.
 Public transportation systems, such as buses, can be rerouted around known congestion
points.
 The number of subway trains can be increased dynamically to respond to an increase in
traffic congestion, anticipating the decisions of thousands or even millions of commuters
to take public transportation instead of cars on days when roads are very congested.
 Here again, the same type of data is utilized by different types of users in different ways
based on their specific use cases.
On-Premises vs. Cloud
 Different cities and regions have different data hosting requirements based on security or
legal policies. A key consideration in developing ICT connectivity solutions is whether a
city has requirements about where data should be hosted.
 Data can be hosted on-premises or in the cloud. Fog architectures provide an intermediate
layer.
 The data resulting from fog processing can be sent to the cloud or to a data center
operated locally (on-premises).
 On-premises encompasses traditional networks, and all their limitations, whereas cloud
hosting encompasses a whole host of security risks if the proper measures are not taken to
secure citizen data.
 When data is sent to the cloud, data sovereignty (supremacy) laws may restrict the
physical location where this data is actually stored.
 Ideally, a smart city utilizing ICT connectivity would use the cloud in its architecture, but
if this is impossible, the city would need to invest far more in the city layer’s networking
components (for example, switches, routers) and still may not be able to drive the same
cross-domain value propositions and scalability in its design.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 46

 Module 5

Smart City Security Architecture

 A serious concern of most smart cities and their citizens is data security.
 Vast quantities of sensitive information are being shared at all times in a layered, realtime
architecture, and cities have a duty to protect their citizens’ data from unauthorized
access, collection, and tampering.
 In general, citizens feel better about data security when the city itself, and not a private
entity, owns public or city-relevant data.
 It is up to the city and the officials who run it to determine how to utilize this data.
 When a private entity owns city-relevant data, the scope of the ownership may initially be
very clear.
 However, later considerations or changes in the private entity strategy may shift the way
the data is used.
 It may then be more difficult for city authorities or the citizens to oppose this new
direction, simply because they do not have any stake in the decision-making process of
the private entity.
 For example, suppose that a private contractor is in charge of collecting and managing
parking sensor data.
 One possible way to increase the profitability of such data is to sell it to insurance
companies looking to charge an additional premium to car owners parking in the street
(vs. in a covered and secured garage).
 Such deviations from the original mandate are less likely to happen when cities own the
data and when citizens have a way to vote against such usages.
 A security architecture for smart cities must utilize security protocols to fortify each layer
of the architecture and protect city data.
 Figure 5.15 shows a reference architecture, with specific security elements highlighted.
Security protocols should authenticate the various components and protect data transport
throughout.
 For example, hijacking traffic sensors to send false traffic data to the system regulating
the street lights may result in dramatic congestion issues.
 The benefit for the offender may be the ability to get “all greens” while traveling, but the
overall result would typically be dangerous and detrimental to the city.
 The security architecture should be able to evolve with the latest technology and
incorporate regional guidelines (for example, city by-laws, county or regional security
regulations).

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 47

 Module 5

 Network partners may also have their own compliance standards, security policies, and
governance requirements that need to be added to the local city requirements.

Figure 5.15 Key Smart and Connected Cities Reference Architecture

The following are common industry elements for security on the network layer:
 Firewall: A firewall is located at the edge, and it should be IPsec- and VPN-ready,
and include user- and role-based access control.
 It should also be integrated with the architecture to give city operators remote access
to the city data center.
 VLAN: A VLAN provides end-to-end segmentation of data transmission, further
protecting data from rogue intervention. Each service/domain has a dedicated VLAN
for data transmission.
 Encryption: Protecting the traffic from the sensor to the application is a common
requirement to avoid data tampering and eavesdropping.
 In most cases, encryption starts at the sensor level. In some cases, the sensor-to
gateway link uses one type of encryption, and the gateway-to-application connection
uses another encryption (for example, a VPN).
Smart City Use-Case Examples
 There are multiple ways a smart city can improve its efficiency and the lives of its
citizens.
 The following sections examine some of the applications commonly used as starting

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 48

 Module 5

points to implement IoT in smart cities: connected street lighting, smart parking, smart
traffic control, and connected environment.
Connected Street Lighting
 Of all urban utilities, street lighting comprises one of the largest expenses in a
municipality’s utility bill, accounting for up to 40% of the total, according to the New
York State Department of Environmental Conservation.
 Maintenance of street lights is an operational challenge, given the large number of lights
and their vast geographic distribution.
Connected Street Lighting Solution
 Cities commonly look for solutions to help reduce lighting expenses and at the same time
improve operating efficiencies while minimizing upfront investment.
 The installation of a smart street lighting solution can provide significant energy savings
and can also be leveraged to provide additional services.
 In this regard, light-emitting diode (LED) technology leads the transition from traditional
street lighting to smart street lighting:
 LEDs require less energy to produce more light than legacy lights, and they have a much
longer life span and a longer maintenance cycle.
 A leading lighting company estimates that a complete switch to LED technology can
reduce individual light bills by up to 70%.
 LEDs are well suited to smart solution use cases.
 For example, LED color or light intensity can be adapted to site requirements (for
example, warmer color and lower intensity in city centers, sun-like clarity on highways,
time- and weather-adaptive intensity and color).
 Figure 5.16 shows how electricity prices rise, while LED prices decrease and their unit
sales rise.

Figure 5.16 Electricity Cost vs. LED Cost and Sales

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 49

 Module 5

Street Lighting Architecture

 Connected lighting uses a light management application to manage street lights remotely
by connecting to the smart city’s infrastructure.
 This application attaches to LED lights, monitors their management and maintenance, and
allows you to view the operational status of each light.
 In most cases, a sensor gateway acts as an intermediate system between the application
and the lights (light control nodes).
 The gateway relays instructions from the application to the lights and stores the local
lights’ events for the application’s consumption.
 The controller and LED lights use the cloud to connect to the smart city’s infrastructure,
as shown in Figure 5.17.

Figure 5.17 Connected Lighting Architecture

 A human or automated operator can use a cloud application to perform automated
scheduling for lights and even get light sensors to perform automated dimming or
brightening, as needed.
 The schedule can also impact the light intensity level and possibly the color, depending
on environmental conditions, weather, time of year, time of day, location within the city,
and so on.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 50

 Module 5

 Lighting nodes vary widely in the industry, especially with respect to elements such as
what communication protocol they use (for example, Wi-Fi, cellular, ZigBee, 802.15.4g
[Wi-SUN], LoRaWAN).
 These features are optimized for different circumstances and conditions; no single
lighting node can support all environments ideally.
 Many solutions leverage wired connectivity, either by using the existing city cable
infrastructure or by adding a cable adjacent to the power cable.
 In cases where cabling is not practical, wireless technologies may bring interesting
capabilities.
 For example, 802.15.4g controllers can be used to form a mesh and extend the network.
This extension is used not only to connect other light poles but also to connect smart
meters from neighboring houses.
 In all cases, the built-in versatility offered by the four-layer architecture shown in Figure
5.17 ensures that all the different types of technologies optimized to fit any city topology
can be flexibly incorporated into the solution.
Smart Parking Use Cases
 Added traffic congestion is one consequence of drivers looking for parking space, and it
has several consequences:
 Contributes to pollution: Tons of extra carbon emissions are released into the city’s
environment due to cars driving around searching for parking spots when they could be
parked.
 Causes motorist frustration: In most cities, parking spot scarcity causes drivers to lose
patience and waste time, leading to road rage, inattention, and other stress factors.
 Increases traffic incidents: Drivers searching for parking spots cause increased
congestion in the streets and that, in turn, causes increased accidents and other traffic
incidents.
 Revenue loss is another consequence of drivers looking unsuccessfully for parking space,
and it also has various negative side effects:
 Cities often lose revenue: As a result of inadequate parking meter enforcement and no-
parking, no-standing, and loading-zone violations, cities lose revenue.
 Parking administration employee productivity suffers: Employees waste time roaming
the streets, attempting to detect parking rules offenders.
 Parking availability affects income: Local shops and businesses lose customers because
of the decreased accessibility caused by parking space shortages.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 51

 Module 5

Smart Parking Architecture

 A variety of parking sensors are available on the market, and they take different
approaches to sensing occupancy for parking spots.
 Examples include in-ground magnetic sensors, which use embedded sensors to create a
magnetic detection field in a parking spot; video-based sensors, which detect events based
on video computing (vehicle movements or presence); and radar sensors that sense the
presence of vehicles (volumetric detection).
 Most sensors installed in the ground must rely on battery power, since running a power
line is typically too expensive.
 In larger (for example, outdoor) environments, a longer-range Low Power Wide Area
(LPWA) protocol is common, as shown in Figure 5.18.

Figure 5.18 Connected Parking Architecture

 Parking sensors are typically event-driven objects.
 A sensor detects an event and identifies it based on time or analysis.
 The event is transmitted through the device’s communication protocol to an access point
or gateway, which forwards the event data through the city layer.
 The gateway sends it to the cloud or a fog application, where it is normalized.
 An application shows the parking event on operator dashboards, or personal smart
phones, where an action can be taken.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 52

 Module 5

 For example, a driver can book a nearby parking spot, or a parking operator can remove it
from the list of available parking spaces in target locations.
 This action triggers data to be sent back to the parking sensor to modify its availability
status based on the received instructions.
 smart parking has three users that applications must support through aggregated data: city
operators, parking enforcement personnel, and citizens.
 The true value of data normalization is that all parking data, regardless of technology or
vendor, would be visible in these applications for the different users to support their
particular experiences.
 The following are some potential user experiences for these three user types.
1) City operators: These users might want a high-level map of parking in the city to
maintain perspective on the city’s ongoing parking situation.
 They would also need information on historical parking data patterns to understand
congestion and pain points in order to be able to effectively influence urban planning.
2) Parking enforcement officers: These users might require real-time updates on parking
changes in a certain area to be able to take immediate action on enforcement activities,
such as issuing tickets or sending warnings to citizens whose time is nearing expiration.
 Their focus is driving revenue creation for the city and minimizing wasted time by
performing parking monitoring and enforcement at scale
3) Citizens: These users might want an application with a map (such as a built-in parking app
in their car) showing available parking spots, reservation capabilities, and online payment.
 Their focus would be on minimizing the time to get a parking spot and avoiding parking
tickets.
 The application could warn when parking duration limits approach, allowing the driver to
move the vehicle before the timer expires or pay a parking timer extension fee without
having to go back to the vehicle.
Smart Traffic Control
 Traffic is one the most well-understood pain points for any city.
 It is the leading cause of accidental death globally, causes immense frustration, and
heavily contributes to pollution around the globe.
 A smart city traffic solution would combine crowd counts, transit information, vehicle
counts, and so on and send events regarding incidents on the road so that other controllers
on the street could take action.
Smart Traffic Control Architecture

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 53

 Module 5

 In the architecture shown in Figure 5.19, a video analytics sensor computes traffic events
based on a video feed and only pushes events (the car count, or metadata, not the
individual images) through the network.
 These events go through the architectural layers and reach the applications that can drive
traffic services.
 These services include traffic light coordination and also license plate identification for
toll roads.
 Some sensors can also recognize abnormal patterns, such as vehicles moving in the wrong
direction or a reserved lane. In that case, the video feed itself may be uploaded to traffic
enforcement agencies.

Figure 5.19 Smart City Traffic Architecture

 Other types of sensors that are part of traffic control solutions include Bluetooth vehicle
counters, real-time speed and vehicle counters, and lighting control systems.
 These sensors provide a real-time perspective while also offering data collection services
for historical data trending and correlation purposes.
Smart Traffic Applications
 Traffic applications can be enabled to take immediate action with other sensors to manage
traffic and to reduce pain points. Historical data can be used to develop more efficient
urban planning to reduce the amount of traffic a city experiences.
 A common traffic pain point is stop-and-go, where traffic flow suddenly comes to a halt
and then flows again.
 This wavelike traffic pattern is a natural result of the unpredictability of the traffic speed
ahead and has long been studied by public and private organizations.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 54

 Module 5

 A well-known remedy for stop-and-go traffic is to regulate the standard flow speed based
on car density.
 As density increases, car speed is forced down to avoid the wave effect.
 An application that measures traffic density in real time can take action by regulating the
street light cycle duration to control the number of cars added to the flow of the main
routes, thus limiting or suppressing the wave effect.
 From the driver’s standpoint, there is a wait time before being able to get on the highway
or main street, and traffic on the main route is slow but steady.
 The impression is that traffic is slow but moving, and the overall result is a better
commute experience, with lowered and less stressful commute time, as well as a reduced
number of accidents.
Connected Environment
 As of 2017, 50% of the world’s population has settled on less than 2% of the earth’s
surface area.
 Such densely populated closed spaces can see spikes in dangerous gas molecules at any
given moment.
 More than 90% of the world’s urban population breathes in air with pollutant levels that
are much higher than the recommended thresholds, and one out of every eight deaths
worldwide is a result of polluted air.
The Need for a Connected Environment
 Most large cities monitor their air quality.
 Data is often derived from enormous air quality monitoring stations that are expensive
and have been around for decades.
 These stations are highly accurate in their measurements but also highly limited in their
range, and a city is likely to have many blind spots in coverage.
 Given the price and size of air quality monitoring stations, cities cannot afford to
purchase the number of stations required to give accurate reports on a localized level and
follow the pollution flows as they move through the city over time.
 To fully address the air quality issues in the short term and the long term, a smart city
would need to understand air quality on a hyper-localized, real-time, distributed basis at
any given moment. To get those measurements, smart cities need to invest in the
following:
 Open-data platforms that provide current air quality measurements from existing
air quality monitoring stations

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 55

 Module 5

 Sensors that provide similar accuracy to the air quality stations but are available at
much lower prices
 Actionable insights and triggers to improve air quality through cross domain
actions
 Visualization of environmental data for consumers and maintenance of historical
air quality data records to track emissions over time.
Connected Environment Architecture
 Figure 5.20 shows an architecture in which all connected environment elements overlay
on the generalized four-layer smart city IoT architecture.

Figure 5.20 Connected Environment Architecture

 As shown in Figure 5.20 , at the street layer there are a variety of multivendor sensor
offerings, using a variety of communication protocols.
 Connected environment sensors might measure different gases, depending on a city’s
particular air quality issues, and may include weather and noise sensors.
 These sensors may be located in a variety of urban fixtures, such as in street lights, as
explained earlier.
 They may also be embedded in the ground or in other structures or smart city
infrastructure.
 Even mobile sources of information can be included through connected wearables that
citizens might choose to purchase and carry with them to understand the air quality
around them at any given moment.
 Crowd sourcing may make this information available to the global system.
 Communication technologies depend on the location of the sensors.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 56

 Module 5

 Wearables typically communicate via a short-range technology (such as Bluetooth) with a

nearby collecting device (such as a phone).
 That device, in turn, forwards the collected data to the infrastructure (for example,
through cellular data).
 Sensors that are installed in urban fixtures also use a variety of communication
technologies.
 Sensors included in street lighting systems may utilize the same communication
infrastructure as the street light control application.
 In addition to all the air quality sensor and wearable data, the data center layer or
application layer represented on the left side of Figure 5.20 also receives the open data
from existing weather stations as an additional data input.
 All these data inputs come together to provide a highly accurate sense of the air quality in
the city at any given moment.
Model Questions
QE1) Compare digital and analog temperature sensor
QE2) What is thermistor? What is its role in temperature sensor?
1) What are the things Arduino can do?
2) Explain Arduino UNO Board.
or
Explain Arduino UNO microcontroller with neat sketch
3) Explain how arduino software package is downloading and installation (write steps)
4) List Technical Specification of Arduino UNO
5) Explain the Data types , operators and constants in Arduino programming.
6) Explain Flow control statements in Arduino programming.
7) Explain Digital and Analog input output pins and their usage with respect to Arduino
8) Compare Raspberry Pi model A+, Model B, Model B+ and Model 3.
9) Draw a neat diagram for Raspberry Pi GPIO pins .
10) Explain Raspberry Pi learning Board.
11) Explain configuring RaspberryPi microcontroller.
12) Explain different categories of Raspberry operating system.
13) Write a python program to check for Armstrong number
14) Describe DS18B20 Temperature Sensor.
15) Give technical specifications of DS18B20 Temperature Sensor along with PIN
Diagram
16) Explain Pi via SSH.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 57

 Module 5

17) Write a program to access temperature from DS18B20 sensor.

or

Write a python code to read temperature value in centigrade (Celsius) and Fahrenheit form
from DS18B20 sensor connected to Raspberry pi microcontroller.

18) Explain Smart City IoT Architecture with a neat diagram.

19) Explain Smart City Security Architecture with a neat diagram.

RNSIT,Dr.BA,VS,KTC, B`lore INTERNET OF THINGS Page 58