Scribd
Upload
212 views

Assignment 4

The document describes a U-shaped two-in-one residential building that can be roofed in two ways. It has a foundation of 230mm brick wall on a stepped strip foundation. The floors are 25mm cement and sand screed on a 100mm concrete slab. The walls are 225mm thick and there are various windows and doors specified. Drawings and specifications are provided for a roof that is gabled on all sides and a roof that is gabled at the front and hipped at the rear.

Uploaded by

AL Lan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
212 views

Assignment 4

The document describes a U-shaped two-in-one residential building that can be roofed in two ways. It has a foundation of 230mm brick wall on a stepped strip foundation. The floors are 25mm cement and sand screed on a 100mm concrete slab. The walls are 225mm thick and there are various windows and doors specified. Drawings and specifications are provided for a roof that is gabled on all sides and a roof that is gabled at the front and hipped at the rear.

Uploaded by

AL Lan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Chapter 5: The U-Shaped House

Advanced Building Drawing - Second Edition

EXAMPLE 1 D4: 2400 x 2100mm steel double leaf door.


VERANDAH/PORCH: The verandah/porch is spanned with
Fig 5.4 Shows a line diagram of a U-shaped two in one residential semi-circular arches and balusters
building that may be roofed in the following ways;
ROOF: Corrugated steel sheets on 100 x 50 purlins, rafters and
Roof 1: The house is all gabbled with a step to roof the two garages. struts, 150 x 50 tie beams on 75 x 50 wall plates.
(Four gables) See fig 5.5. Pitch angle is 30º

Roof 2: The house is gabled at the front and hipped at the


rear(behind). See fig 5.6

SPECIFICATIONS
FOUNDATION: The house is constructed on a sloping
ground with 230mm brick wall on
620 x 230mm stepped strip foundation,
1200mm deep below the ground.
The foundation wall above the ground is
finished with masonary stones.

FLOOR: 25mm of cement and sand screed on 100mm


concrete slab on 150mm of hard-core stones,
on well-compacted marrum.

WALLS: All walls are 225mm thick.

WINDOWS: W1-1500 x 1200mm casement metallic,


W2-1200 x 1200mm casement metallic,
W3-600 x 600mm casement metallic,
W4-600 x 1200mm pompei bricks.

DOORS: D1: 1500 x 2100mm casement metallic double leaf A


D2: 900 x 2100mm flush door,
D3: 900 x 2100mm framed, braced and battened door,
Fig 5.4a Line Diagram
MUTEBI RONALD
40
Chapter 5: The U-Shaped House
Advanced Building Drawing - Second Edition

FRONT ELEVATION (1:100)


SECTION ELEVATION Y - Y (1:100)

EAST END ELEVATION (1:100)


FLOOR PLAN (1:100)

Fig 5.6a U-Shaped house built on a sloping ground (Gabled at the front and hipped at the Rear/Behind)
MUTEBI RONALD
43
Chapter 5: The U-Shaped House
Advanced Building Drawing - Second Edition

ROOF PLAN (1:100) WEST END ELEVATION (1:100)


REAR ELEVATION (1:100)

Fig 5.6b U-Shaped house built on a sloping ground (Gabled at the front and hipped at the Rear/Behind)
MUTEBI RONALD
44

You might also like