iST® (A MODELS)
BF200A ~ BF250A
Premium Top Mount Control Station Cables Trim Switch Panels
Heads Communicate data between the control These auxiliary panels are required to
Offered in single and multiple engine head and outboard engine. control individual trim adjustments
applications, these control heads when installing iST engines in triple or
feature master trim control on the quadruple configurations. Connect
Station Cable, 32530-ZX2-015AH directly to each engine key switch and
throttle handle, and individual controls 15 Ft.
on the head unit for dual engines. They main harness.
also offer ‘Slow’ mode for increased Station Cable, 32530-ZX2-020AH
throttle control while maneuvering at 20 Ft.
Quadruple Trim 35372-ZX2-000AH
slow speeds and ‘Trolling’ mode for Switch Panel
Station Cable, 32530-ZX2-025AH
incremental RPM adjustments at any
25 Ft.
speed.
Station Cable, 32530-ZX2-030AH
30 Ft.
Single Engine 06240-ZX2-040AH
Control Head Station Cable, 32530-ZX2-040AH
40 Ft.
Multiple Engine 06240-ZX2-060AH
Control Head Station Cable, 32530-ZX2-060AH
60 Ft.
Station Cable, 32530-ZX2-080AH
80 Ft.
Dr. H iST T-Harness
Required to enable the connection and
use of the DR. H diagnostic system
with Honda Marine engines equipped
with iST. This is a dealer use special
tool, and is not required for regular use.
Dr. H iST 39865-YH0-000AH
T-Harness
Terminating Resistor
Completes the communication circuit
between the control head(s) and
outboard engine.
Terminating 32530-ZX2-000AH
Resistor
© 2020 American Honda Motor Co., Inc.—All rights reserved 53
iST® (A MODELS)
THIS PAGE INTENTIONALLY LEFT BLANK.
54 © 2020 American Honda Motor Co., Inc.—All rights reserved
